-
Optically-Controlled Nano-Transducers Based on Cleaved Superlattices for Monitoring Gigahertz Surface Acoustic Vibrations
Authors:
Changxiu Li,
Nikolay Chigarev,
Théo Thréard,
Kedong Zhang,
Nicolas Delorme,
Vincent Tournat,
Samuel Raetz,
Hong Lu,
Vitalyi E. Gusev
Abstract:
Surface acoustic waves (SAWs) convey energy at subwavelength depths along surfaces. Using interdigital transducers (IDTs) and opto-acousto-optic transducers (OAOTs), researchers have harnessed coherent SAWs with nanosecond periods and micrometer localization depth for various applications. However, the utilization of cutting-edge OAOTs produced through surface nanopatterning techniques has set the…
▽ More
Surface acoustic waves (SAWs) convey energy at subwavelength depths along surfaces. Using interdigital transducers (IDTs) and opto-acousto-optic transducers (OAOTs), researchers have harnessed coherent SAWs with nanosecond periods and micrometer localization depth for various applications. However, the utilization of cutting-edge OAOTs produced through surface nanopatterning techniques has set the upper limit for coherent SAW frequencies below 100 GHz, constrained by factors such as the quality and pitch of the surface nanopattern, not to mention the electronic bandwidth limitations of the IDTs. In this context, unconventional optically-controlled nano-transducers based on cleaved superlattices (SLs) are here presented as an alternative solution. To demonstrate their viability, we conducted proof-of-concept experiments using ultrafast lasers in a pump-probe configuration on SLs made of alternating AlxGa1-xAs and AlyGa1-yAs layers with approximately 70 nm periodicity and cleaved along their growth direction to produce a periodic nanostructured surface. The acoustic vibrations, generated and detected by laser beams incident on the cleaved surface, span a range from 40 GHz to 70 GHz, corresponding to the generalized surface Rayleigh mode and bulk modes within the dispersion relation. This exploration shows that, in addition to SAWs, cleaved SLs offer the potential to observe surface-skimming longitudinal and transverse acoustic waves at GHz frequencies. This proof-of-concept demonstration below 100 GHz in nanoacoustics using such an unconventional platform offers opportunities for realizing sub-THz to THz coherent surface acoustic vibrations in the future, as SLs can be epitaxially grown with atomic-scale layer width and quality.
△ Less
Submitted 1 October, 2024;
originally announced October 2024.
-
Time-domain Brillouin scattering theory for probe light and acoustic beams propagating at an angle and acousto-optic interaction at material interfaces
Authors:
Vitalyi E. Gusev,
Théo Thréard,
David H. Hurley,
Samuel Raetz
Abstract:
A theory has been developed to interpret time-domain Brillouin scattering (TDBS) experiments involving coherent acoustic pulse (CAP) and light pulse beams propagating at an angle to each other. It predicts the influence of the directivity pattern of their acousto-optic interaction on TDBS signals when heterodyne detection of acoustically scattered light is in backward direction to incident light.…
▽ More
A theory has been developed to interpret time-domain Brillouin scattering (TDBS) experiments involving coherent acoustic pulse (CAP) and light pulse beams propagating at an angle to each other. It predicts the influence of the directivity pattern of their acousto-optic interaction on TDBS signals when heterodyne detection of acoustically scattered light is in backward direction to incident light. The theory reveals the relationships between the carrier frequency, amplitude and duration of acoustically induced "wave packets" in light transient reflectivity signals, and factors such as CAP duration, widths of light and sound beams, and their interaction angle. It describes the transient dynamics of these wave packets when the light and CAP encounter material interfaces, and the light scattering by the incident CAP transforms into scattering by the reflected and transmitted CAPs. The theory suggests that single-point TDBS experiments can determine not only the depth positions of buried interfaces but also their inclinations/orientations.
△ Less
Submitted 20 July, 2023; v1 submitted 12 July, 2021;
originally announced July 2021.
-
Non-thermal transport of energy driven by photoexcited carriers in switchable solid states of GeTe
Authors:
R. Gu,
T. Perrault,
V. Juvé,
G. Vaudel,
M. Weis,
A. Bulou,
N. Chigarev,
A. Levchuk,
S. Raetz,
V. E. Gusev,
Z. Cheng,
H. Bhaskaran,
P. Ruello
Abstract:
Phase change alloys have seen widespread use from rewritable optical discs to the present day interest in their use in emerging neuromorphic computing architectures. In spite of this enormous commercial interest, the physics of carriers in these materials is still not fully understood. Here, we describe the time and space dependence of the coupling between photoexcited carriers and the lattice in…
▽ More
Phase change alloys have seen widespread use from rewritable optical discs to the present day interest in their use in emerging neuromorphic computing architectures. In spite of this enormous commercial interest, the physics of carriers in these materials is still not fully understood. Here, we describe the time and space dependence of the coupling between photoexcited carriers and the lattice in both the amorphous and crystalline states of one phase change material, GeTe. We study this using a time-resolved optical technique called picosecond acoustic method to investigate the \textit{in situ} thermally assisted amorphous to crystalline phase transformation in GeTe. Our work reveals a clear evolution of the electron-phonon coupling during the phase transformation as the spectra of photoexcited acoustic phonons in the amorphous ($a$-GeTe) and crystalline ($α$-GeTe) phases are different. In particular and surprisingly, our analysis of the photoinduced acoustic pulse duration in crystalline GeTe suggests that a part of the energy deposited during the photoexcitation process takes place over a distance that clearly exceeds that defined by the pump light skin depth. In the opposite, the lattice photoexcitation process remains localized within that skin depth in the amorphous state. We then demonstrate that this is due to supersonic diffusion of photoexcited electron-hole plasma in the crystalline state. Consequently these findings prove the existence of a non-thermal transport of energy which is much faster than lattice heat diffusion.
△ Less
Submitted 25 September, 2020;
originally announced September 2020.
-
3D characterisation of individual grains of coexisting high-pressure H2O ice phases by time-domain Brillouin scattering
Authors:
Sathyan Sandeep,
Théo Thréard,
Elton De Lima Savi,
Nikolay Chigarev,
Alain Bulou,
Vincent Tournat,
Andreas Zerr,
Vitalyi E. Gusev,
Samuel Raetz
Abstract:
Time-domain Brillouin scattering uses ultrashort laser pulses to generate coherent acoustic pulses of picoseconds duration in a solid sample and to follow their propagation in order to image material inhomogeneities with sub-optical depth resolution. The width of the acoustic pulse limits the spatial resolution of the technique along the direction of the pulse propagation to less than several tens…
▽ More
Time-domain Brillouin scattering uses ultrashort laser pulses to generate coherent acoustic pulses of picoseconds duration in a solid sample and to follow their propagation in order to image material inhomogeneities with sub-optical depth resolution. The width of the acoustic pulse limits the spatial resolution of the technique along the direction of the pulse propagation to less than several tens of nanometres. Thus, the time-domain Brillouin scattering outperforms axial resolution of the classical frequency-domain Brillouin scattering microscopy, which uses continuous lasers and thermal phonons and which spatial resolution is controlled by light focusing. The technique benefits from the application of the coherent acoustic phonons, and its application has exciting perspectives for the nanoscale imaging in biomedical and material sciences. In this study, we report on the application of the time-domain Brillouin scattering to the 3D imaging of a polycrystal of water ice containing two high-pressure phases. The imaging, accomplished via a simultaneous detection of quasi-longitudinal and quasi-shear waves, provided the opportunity to identify the phase for individual grains and evaluate their crystallographic orientation. Monitoring the propagation of the acoustic waves in two neighbouring grains simultaneously provided an additional mean for the localisation of the grain boundaries.
△ Less
Submitted 12 August, 2020; v1 submitted 31 July, 2020;
originally announced August 2020.
-
Ultrafast light-induced shear strain probed by time-resolved X-ray diffraction: the model multiferroic BiFeO$_3$ as a case study
Authors:
V. Juvé,
R. Gu,
S. Gable,
T. Maroutian,
G. Vaudel,
S. Matzen,
N. Chigarev,
S. Raetz,
V. E. Gusev,
M. Viret,
A. Jarnac,
C. Laulhé,
A. Maznev,
B. Dkhil,
P. Ruello
Abstract:
Enabling the light-control of complex systems on ultra-short timescales gives rise to rich physics with promising applications. While crucial, the quantitative determination of both the longitudinal and shear photo-induced strains still remains challenging. Here, by scrutinizing asymmetric Bragg peaks pairs $(\pm h01)$ using picosecond time-resolved X-ray diffraction experiments in BiFeO$_3$, we s…
▽ More
Enabling the light-control of complex systems on ultra-short timescales gives rise to rich physics with promising applications. While crucial, the quantitative determination of both the longitudinal and shear photo-induced strains still remains challenging. Here, by scrutinizing asymmetric Bragg peaks pairs $(\pm h01)$ using picosecond time-resolved X-ray diffraction experiments in BiFeO$_3$, we simultaneously determine the longitudinal and shear strains. The relative amplitude of those strains can be explained only if both thermal and non-thermal processes contribute to the acoustic phonon photogeneration process. Importantly, we also reveal a difference of the dynamical response of the longitudinal strain with respect to the shear one due to an interplay of quasi-longitudinal and quasi-transverse acoustic modes, well reproduced by our model.
△ Less
Submitted 21 July, 2020;
originally announced July 2020.
-
Growing Phenotype-controlled Phononic Materials from Plant Cells Scaffolds
Authors:
Maroun Abi Ghanem,
Liliane Khoryati,
Reza Behrou,
Amey Khanolkar,
Samuel Raetz,
Florian Allein,
Nicholas Boechler,
Thomas Dehoux
Abstract:
Biological composites offer self-healing properties, biocompatibility, high responsivity to external stimuli, and multifunctionality, due, in part, to their complex, hierarchical microstructure. Such materials can be inexpensively grown, and self-assembled from the bottom up, enabling democratized, sustainable manufacturing routes for micro- and nano-devices. While biological composites have been…
▽ More
Biological composites offer self-healing properties, biocompatibility, high responsivity to external stimuli, and multifunctionality, due, in part, to their complex, hierarchical microstructure. Such materials can be inexpensively grown, and self-assembled from the bottom up, enabling democratized, sustainable manufacturing routes for micro- and nano-devices. While biological composites have been shown to incorporate rich photonic structures, their phononic properties have hitherto remained unexplored. In this study, we demonstrate that biological composites in the form of micron-thick decellularized onion cell scaffolds behave as an organic phononic material, with the presence of band gaps forbidding the propagation of elastic waves in select frequency ranges. We show that the onion cells' phononic properties can be phenotypically tuned, and anticipate these findings will yield new biologically-derived, "green", and genetically tailorable phononic materials.
△ Less
Submitted 29 January, 2020;
originally announced January 2020.
-
Investigation of interfacial stiffnesses of a tri-layer using Zero-Group Velocity Lamb modes
Authors:
Sylvain Mezil,
François Bruno,
Samuel Raetz,
Jérôme Laurent,
Daniel Royer,
Claire Prada
Abstract:
Zero-Group Velocity (ZGV) Lamb waves are studied in a structure composed of two plates bonded by an adhesive layer. The dispersion curves are calculated for a Duralumin/epoxy/Duralumin sample, where the adhesion is modeled by a normal and a tangential spring at both interfaces. Several ZGV modes are identified and their frequency dependence on interfacial stiffnesses and on the bonding layer thick…
▽ More
Zero-Group Velocity (ZGV) Lamb waves are studied in a structure composed of two plates bonded by an adhesive layer. The dispersion curves are calculated for a Duralumin/epoxy/Duralumin sample, where the adhesion is modeled by a normal and a tangential spring at both interfaces. Several ZGV modes are identified and their frequency dependence on interfacial stiffnesses and on the bonding layer thickness are numerically studied. Then, experiments achieved with laser ultrasonic techniques are presented. Local resonances are measured using superimposed source and probe. Knowing the thicknesses and elastic constants of the Duralumin and epoxy layers, the comparison between theoretical and experimental ZGV resonances leads to an evaluation of the interfacial stiffnesses. A good agreement with theoretical dispersion curves confirms the identification of the resonances and the parameter estimations. This non-contact technique is promising for the local evaluation of bonded structures.
△ Less
Submitted 13 November, 2015;
originally announced November 2015.
-
Thermally induced subgap features in the cotunneling spectroscopy of a carbon nanotube
Authors:
S. Ratz,
A. Donarini,
D. Steininger,
T. Geiger,
A. Kumar,
A. K. Hüttel,
Ch. Strunk,
M. Grifoni
Abstract:
We report on nonlinear cotunneling spectroscopy of a carbon nanotube quantum dot coupled to Nb superconducting contacts. Our measurements show rich subgap features in the stability diagram which become more pronounced as the temperature is increased. Applying a transport theory based on the Liouville-von Neumann equation for the density matrix, we show that the transport properties can be attribut…
▽ More
We report on nonlinear cotunneling spectroscopy of a carbon nanotube quantum dot coupled to Nb superconducting contacts. Our measurements show rich subgap features in the stability diagram which become more pronounced as the temperature is increased. Applying a transport theory based on the Liouville-von Neumann equation for the density matrix, we show that the transport properties can be attributed to processes involving sequential as well as elastic and inelastic cotunneling of quasiparticles thermally excited across the gap. In particular, we predict thermal replicas of the elastic and inelastic cotunneling peaks, in agreement with our experimental results.
△ Less
Submitted 17 October, 2014; v1 submitted 21 August, 2014;
originally announced August 2014.
