-
The large magnetocaloric effect and refrigerant capacity in nanocrystalline/ amorphous Gd$_3$Ni/Gd$_{65}$Ni$_{35}$ composite microwires
Authors:
Y. F. Wang,
Y. Y. Yu,
H. Belliveau,
N. T. M. Duc,
H. X. Shen,
J. F. Sun,
J. S. Liu,
F. X. Qin,
S. C. Yu,
H. Srikanth,
M. H. Phan
Abstract:
We report on a novel class of nanocrystalline/amorphous Gd$_3$Ni/Gd$_{65}$Ni$_{35}$ composite microwires, which was created directly by melt-extraction through controlled solidification. X-ray diffraction (XRD) and transmission electron microscopy (TEM) confirmed the formation of a biphase nanocrystalline/amorphous structure in these wires. Magnetic and magnetocaloric experiments indicate the larg…
▽ More
We report on a novel class of nanocrystalline/amorphous Gd$_3$Ni/Gd$_{65}$Ni$_{35}$ composite microwires, which was created directly by melt-extraction through controlled solidification. X-ray diffraction (XRD) and transmission electron microscopy (TEM) confirmed the formation of a biphase nanocrystalline/amorphous structure in these wires. Magnetic and magnetocaloric experiments indicate the large magnetic entropy change (-$Δ$SM ~9.64 J/kg K) and the large refrigerant capacity (RC ~742.1 J/kg) around the Curie temperature of ~120 K for a field change of 5 T. These values are ~1.5 times larger relative to its bulk counterpart, and are superior to other candidate materials being considered for active magnetic refrigeration in the liquid nitrogen temperature range.
△ Less
Submitted 26 July, 2020; v1 submitted 20 July, 2020;
originally announced July 2020.
-
Vertical interface enabled large tunability of scattering spectra in lightweight microwire/silicone rubber composites
Authors:
A. Uddin,
D. Estevez,
H. X. Peng,
F. X. Qin
Abstract:
Previously, we have shown the advantages of an approach based on microstructural modulation of the functional phase and topology of periodically arranged elements to program wave scattering in ferromagnetic microwire composites. However, the possibility of making full use of composite intrinsic structure was not exploited. In this work, we implement the concept of material plainification by an in-…
▽ More
Previously, we have shown the advantages of an approach based on microstructural modulation of the functional phase and topology of periodically arranged elements to program wave scattering in ferromagnetic microwire composites. However, the possibility of making full use of composite intrinsic structure was not exploited. In this work, we implement the concept of material plainification by an in-built vertical interface on randomly dispersed short-cut microwire composites allowing the adjustment of electromagnetic properties to a large extent. Such interface was modified through arranging wires of different structures in two separated regions and by enlarging or reducing these regions through wire concentration variations leading to polarization differences across the interface and hence microwave tunability. When the wire concentration was equal in both regions, two well-defined transmission windows with varied amplitude and bandwidth were generated. Wire concentration fluctuations resulted in strong scattering changes ranging from broad passbands to stopbands with pronounced transmission dips, demonstrating the intimate relationship between wire content and space charge variations at the interface. Overall, this study provides a novel method to rationally exploit interfacial effects in microwire composites. Moreover, the advantages of enabling significantly tunable scattering spectra by merely 0.053 vol. % filler loading and relatively simple structure make the proposed composite plainification strategy instrumental to designing microwave filters with broadband frequency selectivity.
△ Less
Submitted 15 April, 2020;
originally announced April 2020.
-
Tunable microwave absorption performance of nitrogen and sulfur dual-doped graphene by varying doping sequence
Authors:
L. Quan,
H. T. Lu,
F. X. Qin,
D. Estevez,
Y. F. Wang,
Y. H. Li,
Y. Tian,
H. Wang,
H. X. Peng
Abstract:
Sulfur and nitrogen dual doped graphene have been extensively investigated in the field of oxygen reduction reaction, supercapacitors and batteries, but their magnetic and absorption performance have not been explored. Besides, the effects of doping sequence of sulfur and nitrogen atoms on the morphology, structural property and the corresponding microwave absorption performance of the dual doped…
▽ More
Sulfur and nitrogen dual doped graphene have been extensively investigated in the field of oxygen reduction reaction, supercapacitors and batteries, but their magnetic and absorption performance have not been explored. Besides, the effects of doping sequence of sulfur and nitrogen atoms on the morphology, structural property and the corresponding microwave absorption performance of the dual doped graphene remain unexplored. In this work, nitrogen and sulfur dual doped graphene with different doping sequence were successfully prepared using a controllable two steps facile thermal treatment method. The first doping process played a decisive role on the morphology, crystal size, interlayer distance, doping degree and ultimately magnetic and microwave absorption properties of the dual doped graphene samples. Meanwhile, the second doping step affected the doping sites and further had a repairing or damaging effect on the final doped graphene. The dual doped graphene samples exhibited two pronounced absorption peaks which intensity was decided by the order of the doping elements. This nitrogen and sulfur dual doped graphene with controlled doping order provides a strategy for understanding of the interaction between nitrogen and sulfur as dual dopants in graphene and further acquiring microwave absorbing materials with tunable absorption bands by varying the doping sequence.
△ Less
Submitted 22 March, 2020;
originally announced March 2020.
-
Microwave programmable response of Co-based microwire polymer composites through wire microstructure and arrangement optimization
Authors:
A. Uddin,
F. X. Qin,
D. Estevez,
S. D. Jiang,
S. A. Jawed,
L. V. Panina,
H. X. Peng
Abstract:
Traditional approaches to realize microwave tunability in microwire polymer composites which mainly rely on topological factors, magnetic field/stress stimuli, and hybridization prove to be burdensome and restricted to rather narrow band frequencies. This work presents a novel yet facile strategy based on a single component tunable medium to program the transmission response over wide frequency ba…
▽ More
Traditional approaches to realize microwave tunability in microwire polymer composites which mainly rely on topological factors, magnetic field/stress stimuli, and hybridization prove to be burdensome and restricted to rather narrow band frequencies. This work presents a novel yet facile strategy based on a single component tunable medium to program the transmission response over wide frequency bands. To this end, we demonstrated that structural modification of one type of microwire through suitable current annealing and arrangement of the annealed wires in multiple combinations were sufficient to distinctly red-shift the transmission dip frequency of the composites. Such one wire control-strategy endorsed a programmable multivariable system grounded on the variations in both the overall array conductivity or "effectiv" area determined by the wires arrangement and the relaxation time dictated by the annealing degree of microwires. These results can be used to prescribe transmission frequency bands of desired features via diverse microwire arrays and microwave performance from a single component to a composite system design.
△ Less
Submitted 25 June, 2019; v1 submitted 12 April, 2019;
originally announced April 2019.
-
Current-modulation annealing to control microwave permittivity in composites with melt-extracted microwires
Authors:
Y. Luo,
H. X. Peng,
F. X. Qin,
J. S. Liu,
H. Wang,
F. Scarpa,
B. J. P. Adohi,
C. Brosseau
Abstract:
We investigate the microwave properties of epoxy-based composite containing melt-extracted CoFeBSiNb microwires fabricated by a combined current-modulation annealing (CCMA) technique. We observe a shift of the resonance peak in the effective permittivity spectra of the composite sample containing annealed 25 mm Nb-doped microwires as an applied magnetic field is increased. This observation is cons…
▽ More
We investigate the microwave properties of epoxy-based composite containing melt-extracted CoFeBSiNb microwires fabricated by a combined current-modulation annealing (CCMA) technique. We observe a shift of the resonance peak in the effective permittivity spectra of the composite sample containing annealed 25 mm Nb-doped microwires as an applied magnetic field is increased. This observation is consistent with the absorption-dominated impedance for thick microwires and the ferromagnetic resonance phenomenon. It is shown that CCMA is an appropriate technique to release internal residual stresses. Hence, for samples containing small amounts of Nb, we observe that CCMA allows us to suppress the high frequency resonance peak observed in samples containing as-cast wires. However, for samples containing a high amount of Nb, the high frequency peak remains despite the CCMA treatment. In this case, the observation of a two-peak feature in the permittivity spectra is attributed to the coexistence of the amorphous phase and a small amount of nanocrystallites distributed at the wire surface. However, due to large magnetostatic energy of long (35 mm) and short (15 mm) as-cast wires and imperfect wire-epoxy bonding no shift of the resonance peak and the characteristic double peak of the permittivity spectrum can be detected. Overall, CCMA emerges as a promising strategy to control microwave permittivity in composites with melt-extracted microwires.
△ Less
Submitted 8 September, 2015;
originally announced September 2015.
-
Hybridized magnetic microwire metacomposites towards microwave cloaking and barcoding applications
Authors:
Y. Luo,
F. X. Qin,
F. Scarpa,
J. Carbonel,
M. Ipatov,
V. Zhukova,
A. Zhukov,
J. Gonzalez,
H. X. Peng
Abstract:
The microwave behavior of polymer metacomposites containing parallel Fe-based and continuous/short-cut Co-based microwire arrays has been investigated. A magnetic field-tunable metacomposite feature has been identified in the dense continuous hybrid composite confirmed by the transmission windows in the frequency band of 1 to 3.5 GHz. The complex magnetically tuned redshift-blueshift evolution of…
▽ More
The microwave behavior of polymer metacomposites containing parallel Fe-based and continuous/short-cut Co-based microwire arrays has been investigated. A magnetic field-tunable metacomposite feature has been identified in the dense continuous hybrid composite confirmed by the transmission windows in the frequency band of 1 to 3.5 GHz. The complex magnetically tuned redshift-blueshift evolution of the transmission window is reasoned to result from the competition between the dynamic wire-wire interaction and the ferromagnetic resonance of Fe-based wires. Increasing Co-based inter-wire spacing to 10 mm in the continuous hybrid composites, a remarkable dual-band transmission window in the 1.5-3.5 GHz and 9-17 GHz is respectively induced by the ferromagnetic resonance of Fe-based wires and the magnetic resonance arising between Fe-Co wire couples. The hybridization of parallel Fe-based and short-cut Co-based wires in the polymer composite leads to a significant enhancement of the transmission window in the frequency band of 1 to 6 GHz due to the band-stop nature of Co-based wires. The advanced hybridized microwire metacomposites are arguably demonstrated to be particularly attractive for microwave cloaking and radio frequency barcoding applications.
△ Less
Submitted 25 June, 2015;
originally announced June 2015.
-
Understanding of double-curvature shaped magnetoimpedance profiles in Joule-annealed and tensioned microwires at 8-12 GHz
Authors:
V. V. Popov,
V. N. Berzhansky,
H. V. Gomonay,
F. X. Qin
Abstract:
We have investigated for the first time the combined effect of current and stress on the GMI characteristics of vanishing-magnetostrictive Co-rich microwires at microwave frequency. As the current-annealed wire is subject to certain tensile stress, one can observe a drastic transformation of field dependence of MI profiles from smooth shape of a broad peak to deformed shape of a sharp peak with th…
▽ More
We have investigated for the first time the combined effect of current and stress on the GMI characteristics of vanishing-magnetostrictive Co-rich microwires at microwave frequency. As the current-annealed wire is subject to certain tensile stress, one can observe a drastic transformation of field dependence of MI profiles from smooth shape of a broad peak to deformed shape of a sharp peak with the emergence of a kink on each side. It follows that three different regions- core, inner and outer shell -have been formed by the combined effect of Joule annealing, current generated magnetic field and the tensile stress. A critical field sees a drop of field sensitivity from outer to inner shell and shifts to lower value with increasing annealing current. We successfully adapted our core-shell model to a core-shell-shell model by designating different anisotropy field for each region to satisfactorily resolve the unique double-curvature shaped peaks in the field derivative MI profiles.
△ Less
Submitted 24 September, 2014;
originally announced September 2014.
-
In-situ microwave characterization of ferromagnetic microwires-filled polymer composites: a review
Authors:
F. X. Qin,
Y. Luo,
J. Tang,
H. X. Peng,
C. Brosseau
Abstract:
This review describes the emerging research area and relevant physics of polymer-based composites enabled by amorphous ferromagnetic microwires. Fruitful results ranging from their tunable magnetic field and mechanical stress properties and influences of direct current on their microwave behavior are displayed in addition to the brief analysis on the underlying physics. The multifunctionalities ex…
▽ More
This review describes the emerging research area and relevant physics of polymer-based composites enabled by amorphous ferromagnetic microwires. Fruitful results ranging from their tunable magnetic field and mechanical stress properties and influences of direct current on their microwave behavior are displayed in addition to the brief analysis on the underlying physics. The multifunctionalities exhibited strongly imply a variety of potential applications such as structural health monitoring and high-performance sensors. This article underlines that the future challenge mainly lies in proper microwire tailoring in expectation of a better microwave performance of microwire composites
△ Less
Submitted 16 June, 2014;
originally announced June 2014.
-
Dual-band metacomposites containing hybrid Fe and Co-based ferromagnetic microwires
Authors:
Y. Luo,
H. X. Peng,
F. X. Qin,
M. Ipatov,
V. Zhukova,
A. Zhukov,
J. Gonzalez
Abstract:
We investigated the microwave properties of polymer based metacomposites containing hybridized parallel Fe- and Co-based microwire arrays. A dual-band left-handed feature was observed in the frequency bands of 1.5 to 5.5 GHz and 9 to 17 GHz, indicated by two transmission windows associated with ferromagnetic resonance of Fe-based microwires and long range dipolar resonance between the wire arrays.…
▽ More
We investigated the microwave properties of polymer based metacomposites containing hybridized parallel Fe- and Co-based microwire arrays. A dual-band left-handed feature was observed in the frequency bands of 1.5 to 5.5 GHz and 9 to 17 GHz, indicated by two transmission windows associated with ferromagnetic resonance of Fe-based microwires and long range dipolar resonance between the wire arrays. The plasma frequency after hybridization is significantly increased due to the enhanced effective diameter through the wire-wire interactions between the Fe- and Co- microwire couples. These results offer essential perspectives in designing the multi-band metamaterial for microwave applications such as sensors and cloaking devices.
△ Less
Submitted 30 March, 2014;
originally announced May 2014.
-
Metacomposite characteristics and their influential factors of polymer composites containing orthogonal ferromagnetic microwire arrays
Authors:
Y. Luo,
H. X. Peng,
F. X. Qin,
M. Ipatov,
V. Zhukova,
A. Zhukov,
J. Gonzalez
Abstract:
The microwave properties of glass-fibers reinforced polymer composite embedded with an orthogonal array of Fe77Si10B10C3 microwires have been investigated. The composites containing orthogonal wire arrays display a remarkable transmission window in the frequency band of 1 to 6 GHz under zero external magnetic field indicating an intrinsic double-negative-index characteristic. The polymer matrices…
▽ More
The microwave properties of glass-fibers reinforced polymer composite embedded with an orthogonal array of Fe77Si10B10C3 microwires have been investigated. The composites containing orthogonal wire arrays display a remarkable transmission window in the frequency band of 1 to 6 GHz under zero external magnetic field indicating an intrinsic double-negative-index characteristic. The polymer matrices have proved to exert a synergistic effect on the microwave properties, which is responsible for the disappearance of the transmission windows when Ek is perpendicular to the glass fiber direction. The plasma frequency of the orthogonal microwire array composite is higher than that of the parallel microwire array with identical wire spacing; this could be attributed to the enhanced microwire-wave interaction induced by the axial electrical components on the additional layer of perpendicular wires. All these features make this new kind of orthogonal microwire composites promising for potential cloaking and sensing applications.
△ Less
Submitted 29 March, 2014;
originally announced March 2014.
