-
Spin-polarized triplet supercurrent in Josephson junctions with perpendicular ferromagnetic layers
Authors:
Victor Aguilar,
Demet Korucu,
Joseph A. Glick,
Reza Loloee,
W. P. Pratt Jr.,
Norman O. Birge
Abstract:
Josephson junctions containing three ferromagnetic layers with non-collinear magnetizations between adjacent layers carry spin-triplet supercurrent under certain conditions. The signature of the spin-triplet supercurrent is a relatively slow decay of the maximum supercurrent as a function of the thickness of the middle ferromagnetic layer. In this work we focus on junctions where the middle magnet…
▽ More
Josephson junctions containing three ferromagnetic layers with non-collinear magnetizations between adjacent layers carry spin-triplet supercurrent under certain conditions. The signature of the spin-triplet supercurrent is a relatively slow decay of the maximum supercurrent as a function of the thickness of the middle ferromagnetic layer. In this work we focus on junctions where the middle magnetic layer is a [Co/Pd]$_N$ multilayer with perpendicular magnetic anisotropy (PMA), while the outer two layers have in-plane anisotropy. We compare junctions where the middle PMA layer is or is not configured as a synthetic antiferromagnet (PMA-SAF). We find that the supercurrent decays much more rapidly with increasing the number $N$ of [Co/Pd] bilayers in the PMA-SAF junctions compared to the PMA junctions. Similar behavior is observed in junctions containing [Co/Ni]$_N$ PMA multilayers. We model that behavior by assuming that each Co/Pd or Co/Ni interface acts as a partial spin filter, so that the spin-triplet supercurrent in the PMA junctions becomes more strongly spin-polarized as $N$ increases while the supercurrent in the PMA-SAF junctions is suppressed with increasing $N$. We also address a question raised in a previous work regarding how much spin-singlet supercurrent is transmitted through our nominally spin-triplet junctions. We do that by comparing spin-triplet junctions with similar junctions where the order of the magnetic layers has been shuffled. The results of this work are expected to be helpful in designing spin-triplet Josephson junctions for use in cryogenic memory.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
Phase Control in a Spin-Triplet SQUID
Authors:
Joseph A. Glick,
Victor Aguilar,
Adel B. Gougam,
Bethany M. Niedzielski,
E. C. Gingrich,
Reza Loloee,
W. P. Pratt, Jr.,
Norman O. Birge
Abstract:
It is now well established that a Josephson junction made from conventional spin-singlet superconductors containing ferromagnetic layers can carry spin-triplet supercurrent under certain conditions. The first experimental signature of that fact is the propagation of such supercurrent over long distances through strong ferromagnetic materials. Surprisingly, one of the most salient predictions of th…
▽ More
It is now well established that a Josephson junction made from conventional spin-singlet superconductors containing ferromagnetic layers can carry spin-triplet supercurrent under certain conditions. The first experimental signature of that fact is the propagation of such supercurrent over long distances through strong ferromagnetic materials. Surprisingly, one of the most salient predictions of the theory has yet to be verified experimentally -- namely that a Josephson junction containing three magnetic layers with coplanar magnetizations should exhibit a ground-state phase shift of either zero or pi depending on the relative orientations of those magnetizations. Here we demonstrate this property using Josephson junctions containing three different types of magnetic layers, chosen so that the magnetization of one layer can be switched by 180 degrees without disturbing the other two. Phase-sensitive detection is accomplished using a superconducting quantum interference device, or SQUID. Such a phase-controllable junction could be used as the memory element in a fully-superconducting computer.
△ Less
Submitted 2 April, 2018;
originally announced April 2018.
-
Spin-triplet supercurrent in Josephson junctions containing a synthetic antiferromagnet with perpendicular magnetic anisotropy
Authors:
Joseph A. Glick,
Samuel Edwards,
Demet Korucu,
Victor Aguilar,
Bethany M. Niedzielski,
Reza Loloee,
W. P. Pratt, Jr.,
Norman O. Birge,
P. G. Kotula,
N. Missert
Abstract:
We present measurements of Josephson junctions containing three magnetic layers with noncolinear magnetizations. The junctions are of the form $S/F^{\prime}/N/F/N/F^{\prime \prime}/S$, where $S$ is superconducting Nb, $F^\prime$ is either a thin Ni or Permalloy layer with in-plane magnetization, $N$ is the normal metal Cu, $F$ is a synthetic antiferromagnet (SAF) with magnetization perpendicular t…
▽ More
We present measurements of Josephson junctions containing three magnetic layers with noncolinear magnetizations. The junctions are of the form $S/F^{\prime}/N/F/N/F^{\prime \prime}/S$, where $S$ is superconducting Nb, $F^\prime$ is either a thin Ni or Permalloy layer with in-plane magnetization, $N$ is the normal metal Cu, $F$ is a synthetic antiferromagnet (SAF) with magnetization perpendicular to the plane, composed of Pd/Co multilayers on either side of a thin Ru spacer, and $F^{\prime \prime}$ is a thin Ni layer with in-plane magnetization. The supercurrent in these junctions decays more slowly as a function of the $F$-layer thickness than for similar spin-singlet junctions not containing the $F^\prime$ and $F^{\prime \prime}$ layers. The slower decay is the prime signature that the supercurrent in the central part of these junctions is carried by spin-triplet pairs. The junctions containing $F^{\prime}=$ Permalloy are suitable for future experiments where either the amplitude of the critical current or the ground-state phase difference across the junction is controlled by changing the relative orientations of the magnetizations of the $F^{\prime}$ and $F^{\prime \prime}$ layers.
△ Less
Submitted 19 October, 2017;
originally announced October 2017.
-
Spin-valve Josephson junctions for cryogenic memory
Authors:
Bethany M. Niedzielski,
T. J. Bertus,
Joseph A. Glick,
R. Loloee,
W. P. Pratt, Jr.,
Norman O. Birge
Abstract:
Josephson junctions containing two ferromagnetic layers are being considered for use in cryogenic memory. Our group recently demonstrated that the ground-state phase difference across such a junction with carefully chosen layer thicknesses could be controllably toggled between zero and $π$ by switching the relative magnetization directions of the two layers between the antiparallel and parallel co…
▽ More
Josephson junctions containing two ferromagnetic layers are being considered for use in cryogenic memory. Our group recently demonstrated that the ground-state phase difference across such a junction with carefully chosen layer thicknesses could be controllably toggled between zero and $π$ by switching the relative magnetization directions of the two layers between the antiparallel and parallel configurations. However, several technological issues must be addressed before those junctions can be used in a large-scale memory. Many of these issues can be more easily studied in single junctions, rather than in the Superconducting QUantum Interference Device (SQUID) used for the phase-sensitive measurements. In this work, we report a comprehensive study of spin-valve junctions containing a Ni layer with a fixed thickness of 2.0 nm, and a NiFe layer of thickness varying between 1.1 and 1.8 nm in steps of 0.1 nm. We extract the field shift of the Fraunhofer patterns and the critical currents of the junctions in the parallel and antiparallel magnetic states, as well as the switching fields of both magnetic layers. We also report a partial study of similar junctions containing a slightly thinner Ni layer of 1.6 nm and the same range of NiFe thicknesses. These results represent the first step toward mapping out a ``phase diagram" for phase-controllable spin-valve Josephson junctions as a function of the two magnetic layer thicknesses.
△ Less
Submitted 22 January, 2018; v1 submitted 14 September, 2017;
originally announced September 2017.
-
Critical Current Oscillations of Josephson Junctions Containing PdFe Nanomagnets
Authors:
Joseph A. Glick,
Reza Loloee,
W. P. Pratt, Jr.,
Norman O. Birge
Abstract:
Josephson junctions with ferromagnetic layers are vital elements in a new class of cryogenic memory devices. One style of memory device contains a spin valve with one "hard" magnetic layer and one "soft" layer. To achieve low switching fields, it is advantageous for the soft layer to have low magnetization and low magnetocrystalline anisotropy. A candidate class of materials that fulfills these cr…
▽ More
Josephson junctions with ferromagnetic layers are vital elements in a new class of cryogenic memory devices. One style of memory device contains a spin valve with one "hard" magnetic layer and one "soft" layer. To achieve low switching fields, it is advantageous for the soft layer to have low magnetization and low magnetocrystalline anisotropy. A candidate class of materials that fulfills these criteria is the Pd$_{1-x}$Fe$_{x}$ alloy system with low Fe concentrations. We present studies of micron-scale elliptically-shaped Josephson junctions containing Pd$_{97}$Fe$_{3}$ layers of varying thickness. By applying an external magnetic field, the critical current of the junctions are found to follow characteristic Fraunhofer patterns. The maximum value of the critical current, extracted from the Fraunhofer patterns, oscillates as a function of the ferromagnetic barrier thickness, indicating transitions in the phase difference across the junction between values of zero and $π$.
△ Less
Submitted 5 September, 2016;
originally announced September 2016.
-
Critical Current Oscillations of Elliptical Josephson Junctions with Single-Domain Ferromagnetic Layers
Authors:
Joseph A. Glick,
Mazin A. Khasawneh,
Bethany M. Niedzielski,
E. C. Gingrich,
P. G. Kotula,
N. Missert,
Reza Loloee,
W. P. Pratt Jr.,
Norman O. Birge
Abstract:
Josephson junctions containing ferromagnetic layers are of considerable interest for the development of practical cryogenic memory and superconducting qubits. Such junctions exhibit a phase shift of $π$ for certain ranges of ferromagnetic layer thickness. We present studies of Nb based micron-scale elliptically-shaped Josephson junctions containing ferromagnetic barriers of Ni$_{81}$Fe$_{19}$ or N…
▽ More
Josephson junctions containing ferromagnetic layers are of considerable interest for the development of practical cryogenic memory and superconducting qubits. Such junctions exhibit a phase shift of $π$ for certain ranges of ferromagnetic layer thickness. We present studies of Nb based micron-scale elliptically-shaped Josephson junctions containing ferromagnetic barriers of Ni$_{81}$Fe$_{19}$ or Ni$_{65}$Co$_{20}$Fe$_{15}$. By applying an external magnetic field, the critical current of the junctions are found to follow characteristic Fraunhofer patterns, and display sharp switching behavior suggestive of single-domain magnets. The high quality of the Fraunhofer patterns enables us to extract the maximum value of the critical current even when the peak is shifted significantly outside the range of the data due to the magnetic moment of the ferromagnetic layer. The maximum value of the critical current oscillates as a function of the ferromagnetic barrier thickness, indicating transitions in the phase difference across the junction between values of zero and $π$. We compare the data to previous work and to models of the 0-$π$ transitions based on existing theories.
△ Less
Submitted 18 September, 2017; v1 submitted 31 August, 2016;
originally announced August 2016.
-
Amplitude control of spin-triplet supercurrent in S/F/S Josephson junctions
Authors:
William Martinez,
W. P. Pratt, Jr.,
Norman O. Birge
Abstract:
Josephson junctions made with conventional s-wave superconductors and containing multiple layers of ferromagnetic materials can carry spin-triplet supercurrent in the presence of certain types of magnetic inhomogeneity. In junctions containing three ferromagnetic layers, the triplet supercurrent is predicted to be maximal when the magnetizations of adjacent layers are orthogonal, and zero when the…
▽ More
Josephson junctions made with conventional s-wave superconductors and containing multiple layers of ferromagnetic materials can carry spin-triplet supercurrent in the presence of certain types of magnetic inhomogeneity. In junctions containing three ferromagnetic layers, the triplet supercurrent is predicted to be maximal when the magnetizations of adjacent layers are orthogonal, and zero when the magnetizations of any two adjacent layers are parallel. Here we demonstrate on-off control of the spin-triplet supercurrent in such junctions, achieved by rotating the magnetization direction of one of the three layers by 90$^{\circ}$. We obtain "on-off" ratios of 5, 7, and 19 for the supercurrent in the three samples studied so far. These observations directly confirm one of the most salient predictions of the theory, and pave the way for applications of spin-triplet Josephson junctions in the nascent area of "superconducting spintronics."
△ Less
Submitted 7 October, 2015;
originally announced October 2015.
-
Controllable 0-pi Josephson junctions containing a ferromagnetic spin valve
Authors:
E. C. Gingrich,
Bethany M. Niedzielski,
Joseph A. Glick,
Yixing Wang,
D. L. Miller,
Reza Loloee. W. P. Pratt Jr.,
Norman O. Birge
Abstract:
Superconductivity and ferromagnetism are antagonistic forms of order, and rarely coexist. Many interesting new phenomena occur, however, in hybrid superconducting/ferromagnetic systems. For example, a Josephson junction containing a ferromagnetic material can exhibit an intrinsic phase shift of pi in its ground state for certain thicknesses of the material. Such "pi-junctions" were first realized…
▽ More
Superconductivity and ferromagnetism are antagonistic forms of order, and rarely coexist. Many interesting new phenomena occur, however, in hybrid superconducting/ferromagnetic systems. For example, a Josephson junction containing a ferromagnetic material can exhibit an intrinsic phase shift of pi in its ground state for certain thicknesses of the material. Such "pi-junctions" were first realized experimentally in 2001, and have been proposed as circuit elements for both high-speed classical superconducting computing and for quantum computing. Here we demonstrate experimentally that the phase state of a Josephson junction containing two ferromagnetic layers can be toggled between 0 and pi by changing the relative orientation of the two magnetizations. These controllable 0-pi junctions have immediate applications in cryogenic memory where they serve as a necessary component to an ultra-low power superconducting computer. Such a fully superconducting computer is estimated to be orders of magnitude more energy-efficient than current semiconductor-based supercomputers. Phase controllable junctions also open up new possibilities for superconducting circuit elements such as superconducting "programmable logic," where they could function in superconducting analogs to field-programmable gate arrays.
△ Less
Submitted 17 September, 2015;
originally announced September 2015.
-
Spin-Flipping in Pt and at Co/Pt Interfaces
Authors:
Hoang Yen Thi Nguyen,
Jack Bass,
William P. Pratt Jr
Abstract:
There has been recent controversy about the magnitude of spin-flipping in the heavy metal Pt, characterized by the spin-diffusion length, lsf(Pt) We propose a resolution of this controversy, and also present evidence for the importance of a phenomenon neglected in prior studies of transport across sputtered Ferromagnetic/Pt (F/Pt) interfaces, spin-flipping at the interface. The latter is character…
▽ More
There has been recent controversy about the magnitude of spin-flipping in the heavy metal Pt, characterized by the spin-diffusion length, lsf(Pt) We propose a resolution of this controversy, and also present evidence for the importance of a phenomenon neglected in prior studies of transport across sputtered Ferromagnetic/Pt (F/Pt) interfaces, spin-flipping at the interface. The latter is characterized by an interface spin-flipping parameter, delta(Co/Pt) that specifies the probability P = [1 - exp(-delta)] of a conduction electron flipping its spin direction as it traverses a Co/Pt interface. From studies of the Current-Perpendicular-to-Plane (CPP) Resistances and Magnetoresistances of sputtered ferromagnetically coupled Co/Pt multilayers by themselves, and embedded within Py-based Double Exchange-biased Spin-Valves, we derive values at 4.2K of delta(Co/Pt) = 0.9 (+0.5/-0.2), the interface specific resistance, AR*(Co/Pt) = 0.74 +/- 0.15 fohm-m(2). and the interface spin-scattering asymmetry, gamma(Co/Pt) = 0.58 +/- 0.12. This value of delta(Co/Pt) is much larger than ones previously found for interfaces involving Co but not Pt. To derive delta requires knowledge of the spin-diffusion length, lsf(Pt), for our sputtered Pt. We derive lsf(Pt) from separate measurements. Combining our results with those from others, we find that lsf(Pt) for Pt is approximately proportional to the inverse resistivity, 1/rho(Pt).
△ Less
Submitted 14 December, 2013; v1 submitted 16 October, 2013;
originally announced October 2013.
-
Spin Triplet Supercurrent in Co/Ni Multilayer Josephson Junctions with Perpendicular Anisotropy
Authors:
E. C. Gingrich,
P. Quarterman,
Y. Wang,
R. Loloee,
W. P. Pratt Jr,
N. O. Birge
Abstract:
We have measured spin-triplet supercurrent in Josephson junctions of the form S/F'/F/F'/S, where S is superconducting Nb, F' is a thin Ni layer with in-plane magnetization, and F is a Ni/[Co/Ni]n multilayer with out-of-plane magnetization. The supercurrent in these junctions decays very slowly with F-layer thickness, and is much larger than in similar junctions not containing the two F' layers. Th…
▽ More
We have measured spin-triplet supercurrent in Josephson junctions of the form S/F'/F/F'/S, where S is superconducting Nb, F' is a thin Ni layer with in-plane magnetization, and F is a Ni/[Co/Ni]n multilayer with out-of-plane magnetization. The supercurrent in these junctions decays very slowly with F-layer thickness, and is much larger than in similar junctions not containing the two F' layers. Those two features are the characteristic signatures of spin-triplet supercurrent, which is maximized by the orthogonality of the magnetizations in the F and F' layers. Magnetic measurements confirm the out-of-plane anisotropy of the Co/Ni multilayers. These samples have their critical current optimized in the as-prepared state, which will be useful for future applications.
△ Less
Submitted 15 August, 2012;
originally announced August 2012.
-
Area-dependence of spin-triplet supercurrent in ferromagnetic Josephson junctions
Authors:
Yixing Wang,
W. P. Pratt, Jr.,
Norman O. Birge
Abstract:
Josephson junctions containing multiple ferromagnetic layers can carry spin-triplet supercurrent under certain conditions. Large-area junctions containing multiple domains are expected to have a random distribution of 0 or pi coupling across the junction surface, whereas magnetized samples should have uniquely pi coupling everywhere. We have measured the area dependence of the critical current in…
▽ More
Josephson junctions containing multiple ferromagnetic layers can carry spin-triplet supercurrent under certain conditions. Large-area junctions containing multiple domains are expected to have a random distribution of 0 or pi coupling across the junction surface, whereas magnetized samples should have uniquely pi coupling everywhere. We have measured the area dependence of the critical current in such junctions, and confirm that the critical current scales linearly with area in magnetized junctions. For as-grown (multi-domain) samples, the results are mixed. Samples grown on a thick Nb base exhibit critical currents that scale sub-linearly with area, while samples grown on a smoother Nb/Al multilayer base exhibit critical currents that scale linearly with area. The latter results are consistent with a theoretical picture due to Zyuzin and Spivak that predicts that the as-grown samples should have global pi/2 coupling.
△ Less
Submitted 28 April, 2012;
originally announced April 2012.
-
Area-dependence of spin-triplet supercurrent in ferromagnetic Josephson junctions
Authors:
Yixing Wang,
W P Pratt, Jr,
Norman O Birge
Abstract:
In 2010, several experimental groups obtained compelling evidence for spin-triplet supercurrent in Josephson junctions containing strong ferromagnetic materials. Our own best results were obtained from large-area junctions containing a thick central Co/Ru/Co "synthetic antiferromagnet" and two thin outer layers made of Ni or PdNi alloy. Because the ferromagnetic layers in our samples are multi-dom…
▽ More
In 2010, several experimental groups obtained compelling evidence for spin-triplet supercurrent in Josephson junctions containing strong ferromagnetic materials. Our own best results were obtained from large-area junctions containing a thick central Co/Ru/Co "synthetic antiferromagnet" and two thin outer layers made of Ni or PdNi alloy. Because the ferromagnetic layers in our samples are multi-domain, one would expect the sign of the local current-phase relation inside the junctions to vary randomly as a function of lateral position. Here we report measurements of the area dependence of the critical current in several samples, where we find some evidence for those random sign variations. When the samples are magnetized, however, the critical current becomes clearly proportional to the area, indicating that the current-phase relation has the same sign across the entire area of the junctions.
△ Less
Submitted 31 August, 2011;
originally announced August 2011.
-
Optimization of spin-triplet supercurrent in ferromagnetic Josephson junctions
Authors:
Carolin Klose,
Trupti S. Khaire,
Yixing Wang,
W. P. Pratt, Jr.,
Norman O. Birge,
B. J. McMorran,
T. P. Ginley,
J. A. Borchers,
B. J. Kirby,
B. B. Maranville,
J. Unguris
Abstract:
In the past year, several groups have observed evidence for long-range spin-triplet supercurrent in Josephson junctions containing ferromagnetic (F) materials. In our work, the spin-triplet pair correlations are created by non-collinear magnetizations between a central Co/Ru/Co "synthetic antiferromagnet" (SAF) and two outer thin F layers. Here we present data showing that the spin-triplet supercu…
▽ More
In the past year, several groups have observed evidence for long-range spin-triplet supercurrent in Josephson junctions containing ferromagnetic (F) materials. In our work, the spin-triplet pair correlations are created by non-collinear magnetizations between a central Co/Ru/Co "synthetic antiferromagnet" (SAF) and two outer thin F layers. Here we present data showing that the spin-triplet supercurrent is enhanced up to 20 times after our samples are subject to a large in-plane magnetizing field. This surprising result can be explained if the Co/Ru/Co SAF undergoes a "spin-flop" transition, whereby the two Co layer magnetizations end up perpendicular to the magnetizations of the two thin F layers. Direct experimental evidence for the spin-flop transition comes from scanning electron microscopy with polarization analysis and from spin-polarized neutron reflectometry.
△ Less
Submitted 29 August, 2011;
originally announced August 2011.
-
Proximity-induced density-of-states oscillations in a superconductor/strong-ferromagnet system
Authors:
Kurt M. Boden,
W. P. Pratt Jr.,
Norman O. Birge
Abstract:
We have measured the evolution of the tunneling density of states (DOS) in superconductor/ferromagnet (S/F) bilayers with increasing F-layer thickness, where F in our experiment is the strong ferromagnet Ni. As a function of increasing Ni thickness, we detect multiple oscillations in the DOS at the Fermi energy from differential conductance measurements. The features in the DOS associated with the…
▽ More
We have measured the evolution of the tunneling density of states (DOS) in superconductor/ferromagnet (S/F) bilayers with increasing F-layer thickness, where F in our experiment is the strong ferromagnet Ni. As a function of increasing Ni thickness, we detect multiple oscillations in the DOS at the Fermi energy from differential conductance measurements. The features in the DOS associated with the proximity effect change from normal to inverted twice as the Ni thickness increases from 1 to 5 nm.
△ Less
Submitted 29 August, 2011;
originally announced August 2011.
-
Spin-memory loss at Co/Ru interfaces
Authors:
Mazin A. Khasawneh,
Carolin Klose,
W. P. Pratt, Jr.,
Norman O. Birge
Abstract:
We have determined the spin-memory-loss parameter, $δ_{Co/Ru}$, by measuring the transmission of spin-triplet and spin-singlet Cooper pairs across Co/Ru interfaces in Josephson junctions and by Current-Perpendicular-to-Plane Giant Magnetoresistance (CPP-GMR) techniques. The probability of spin-memory loss at the Co/Ru interface is $(1-exp(-δ_{Co/Ru}))$. From the CPP-MR, we obtain…
▽ More
We have determined the spin-memory-loss parameter, $δ_{Co/Ru}$, by measuring the transmission of spin-triplet and spin-singlet Cooper pairs across Co/Ru interfaces in Josephson junctions and by Current-Perpendicular-to-Plane Giant Magnetoresistance (CPP-GMR) techniques. The probability of spin-memory loss at the Co/Ru interface is $(1-exp(-δ_{Co/Ru}))$. From the CPP-MR, we obtain $δ_{Co/Ru} = 0.34^{+0.04}_{-0.02}$ that is in good agreement with $δ_{Co/Ru} = 0.35 \pm 0.08$ obtained from spin-triplet transmission. For spin-singlet transmission, we have $δ_{Co/Ru} = 0.64 \pm 0.05$ that is different from that obtained from CPP-GMR and spin-triplet transmission. The source of this difference is not understood.
△ Less
Submitted 15 April, 2011;
originally announced April 2011.
-
Conduction Electron Scattering and Spin-Flipping at Sputtered Co/Ni Interfaces
Authors:
H. Y. T. Nguyen,
R. Acharyya,
E. Huey,
B. Richard,
R. Loloee,
W. P. Pratt Jr.,
J. Bass,
Shuai Wang,
Ke Xia
Abstract:
Current-perpendicular-to-plane magnetoresistance (CPP-MR) measurements let us quantify conduction electron scattering and spin-flipping at a sputtered ferromagnetic/ferromagnetic (F1/F2 = Co/Ni) interface, with important consequences for CPP-MR and spin-torque experiments with perpendicular anisotropy. We use ferromagnetically coupled ([Ni/Co]xn)Ni multilayers, and Py-based, symmetric double excha…
▽ More
Current-perpendicular-to-plane magnetoresistance (CPP-MR) measurements let us quantify conduction electron scattering and spin-flipping at a sputtered ferromagnetic/ferromagnetic (F1/F2 = Co/Ni) interface, with important consequences for CPP-MR and spin-torque experiments with perpendicular anisotropy. We use ferromagnetically coupled ([Ni/Co]xn)Ni multilayers, and Py-based, symmetric double exchange-biased spin-valves (DEBSVs) containing inserts of ferromagnetically coupled ([Co/Ni]xn)Co or ([Ni/Co]xn)Ni multilayers, to derive Co/Ni interface specific resistances AR(Co/Ni)(Up) = 0.03 (+0.02)(-0.03) f-ohm-m^2 and AR(Co/Ni)(down) = 1.00 +/- 0.07 f-ohm-m^2, and interface spin-flipping parameter delta(Co/Ni) = 0.35 +/- 0.05. The specific resistances are consistent with our no-free-parameter calculations for an interface thickness between 2 and 4 monolayers (ML) that is compatible with expectations.
△ Less
Submitted 20 December, 2010;
originally announced December 2010.
-
A Study of Spin-Flipping in Sputtered IrMn using Py-based Exchange-Biased Spin-Valves
Authors:
R. Acharyya,
H. Y. T. Nguyen,
W. P. Pratt Jr.,
J. Bass
Abstract:
To study spin flipping within the antiferromagnet IrMn, we extended prior Current-Perpendicular-to-Plane (CPP) Giant Magnetoresistance (GMR) studies of Py-based exchange-biased-spin-valves containing IrMn inserts to thicker IrMn layers-5 nm less than or equal to t(IrMn) less than or equal to 30 nm. Unexpectedly, AΔR = A[R(AP) - R(P)]--the difference in specific resistance between the anti-parallel…
▽ More
To study spin flipping within the antiferromagnet IrMn, we extended prior Current-Perpendicular-to-Plane (CPP) Giant Magnetoresistance (GMR) studies of Py-based exchange-biased-spin-valves containing IrMn inserts to thicker IrMn layers-5 nm less than or equal to t(IrMn) less than or equal to 30 nm. Unexpectedly, AΔR = A[R(AP) - R(P)]--the difference in specific resistance between the anti-parallel (AP) and parallel (P) magnetic states of the two Py layers-did not decrease with increasing t(IrMn), for t(IrMn) greater than 5 nm, but rather became constant to within our measuring uncertainty. This constant looks to be due mostly to a new, small MR in thin Py layers. The constant complicates isolating the spin-diffusion length, lsf(IrMn), in bulk IrMn, but lsf(IrMn) is probably short, less than or equal to 1 nm. Similar results were found with FeMn.
△ Less
Submitted 18 December, 2010;
originally announced December 2010.
-
Conduction Electron Spin-Flipping at Sputtered Co(90)Fe(10)/Cu Interfaces
Authors:
H. Y. T. Nguyen,
R. Acharyya,
W. P. Pratt Jr.,
J. Bass
Abstract:
From measurements of the current-perpendicular-to-plane (CPP) magnetoresistance of ferromagnetically coupled [Co(90)Fe(10)/Cu]xn multilayers, within sputtered Permalloy-based double exchange biased spin-valves, we determine the parameter delta[(Co(90)Fe(10))/Cu] = 0.19 +/- 0.04 that sets the probability P of spin-flipping at a Co(90)Fe(10)/Cu interface via the equation P = 1 - exp(-delta).
From measurements of the current-perpendicular-to-plane (CPP) magnetoresistance of ferromagnetically coupled [Co(90)Fe(10)/Cu]xn multilayers, within sputtered Permalloy-based double exchange biased spin-valves, we determine the parameter delta[(Co(90)Fe(10))/Cu] = 0.19 +/- 0.04 that sets the probability P of spin-flipping at a Co(90)Fe(10)/Cu interface via the equation P = 1 - exp(-delta).
△ Less
Submitted 18 December, 2010;
originally announced December 2010.
-
A way to measure electron spin-flipping at F/N interfaces and application to Co/Cu
Authors:
B. Dassonneville,
R. Acharyya,
H. Y. T. Nguyen,
R. Loloee,
W. P. Pratt Jr.,
J. Bass
Abstract:
We describe a technique, using the current-perpendicular-to-plane (CPP) geometry, to measure the parameter delta(F/N), characterizing flipping of electron spins at a ferromagnetic/non-magnetic (F/N) metallic interface. The technique involves measuring the CPP magnetoresistance of a sample containing a ferromagnetically coupled [F/N]x n multilayer embedded within the 20 nm thick central Cu layer…
▽ More
We describe a technique, using the current-perpendicular-to-plane (CPP) geometry, to measure the parameter delta(F/N), characterizing flipping of electron spins at a ferromagnetic/non-magnetic (F/N) metallic interface. The technique involves measuring the CPP magnetoresistance of a sample containing a ferromagnetically coupled [F/N]x n multilayer embedded within the 20 nm thick central Cu layer of a symmetric Py-based, double exchange-biased spin-valve. To focus on delta(F/N), the F- and N-layers are made thin compared to their spin-diffusion lengths. We test the technique using F/N = Co/Cu. Analysing with no adjustable parameters, gives inconsistency with delta(Co/Cu) = 0, but consistency with our prior value of delta(Co/Cu) = 0.25 (+/- 0.1). Taking delta(Co/Cu) as adjustable gives delta(Co/Cu) = 0.33 (+0.03/-0.08).
△ Less
Submitted 22 December, 2009;
originally announced December 2009.
-
Observation of spin-triplet superconductivity in Co-based Josephson Junctions
Authors:
Trupti S. Khaire,
Mazin A. Khasawneh,
W. P. Pratt, Jr.,
Norman O. Birge
Abstract:
We have measured a long-range supercurrent in Josephson junctions containing Co (a strong ferromagnetic material) when we insert thin layers of either PdNi or CuNi weakly-ferromagnetic alloys between the Co and the two superconducting Nb electrodes. The critical current in such junctions hardly decays for Co thicknesses in the range of 12-28 nm, whereas it decays very steeply in similar junction…
▽ More
We have measured a long-range supercurrent in Josephson junctions containing Co (a strong ferromagnetic material) when we insert thin layers of either PdNi or CuNi weakly-ferromagnetic alloys between the Co and the two superconducting Nb electrodes. The critical current in such junctions hardly decays for Co thicknesses in the range of 12-28 nm, whereas it decays very steeply in similar junctions without the alloy layers. The long-range supercurrent is controllable by the thickness of the alloy layer, reaching a maximum for a thickness of a few nm. These experimental observations provide strong evidence for induced spin-triplet pair correlations, which have been predicted to occur in superconducting/ferromagnetic hybrid systems in the presence of certain types of magnetic inhomogeneity.
△ Less
Submitted 1 December, 2009;
originally announced December 2009.
-
Measurement of spin memory lengths in PdNi and PdFe ferromagnetic alloys
Authors:
H. Arham,
T. S. Khaire,
R. Loloee,
W. P. Pratt, Jr.,
Norman O. Birge
Abstract:
Weakly ferromagnetic alloys are being used by several groups in the study of superconducting/ferromagnetic hybrid systems. Because spin-flip and spin-orbit scattering in such alloys disrupt the penetration of pair correlations into the ferromagnetic material, it is desirable to have a direct measurement of the spin memory length in such alloys. We have measured the spin memory length at 4.2 K in…
▽ More
Weakly ferromagnetic alloys are being used by several groups in the study of superconducting/ferromagnetic hybrid systems. Because spin-flip and spin-orbit scattering in such alloys disrupt the penetration of pair correlations into the ferromagnetic material, it is desirable to have a direct measurement of the spin memory length in such alloys. We have measured the spin memory length at 4.2 K in sputtered Pd0.88Ni0.12 and Pd0.987Fe0.013 alloys using methods based on current-perpendicular-to-plane giant magnetoresistance. The alloys are incorporated into hybrid spin valves of various types, and the spin memory length is determined by fits of the Valet-Fert spin-transport equations to data of magnetoresistance vs. alloy thickness. For the case of PdNi alloy, the resulting values of the spin memory length are lsf(PdNi) = 2.8 +/- 0.5 nm and 5.4 +/- 0.6 nm, depending on whether or not the PdNi is exchange biased by an adjacent Permalloy layer. For PdFe, the spin memory length is somewhat longer, lsf(PdFe) = 9.6 +/- 2 nm, consistent with earlier measurements indicating lower spin-orbit scattering in that material. Unfortunately, even the longer spin memory length in PdFe may not be long enough to facilitate observation of spin-triplet superconducting correlations predicted to occur in superconducting/ferromagnetic hybrid systems in the presence of magnetic inhomogeneity.
△ Less
Submitted 30 August, 2009;
originally announced August 2009.
-
Perpendicular-current Studies of Electron Transport Across Metal/Metal Interfaces
Authors:
W. P. Pratt Jr.,
J. Bass
Abstract:
We review what we have learned about the scattering of electrons by the interfaces between two different metals (M1/M2) in the current-perpendicular-to-plane (CPP) geometry. In this geometry, the intrinsic quantity is the specific resistance, AR, the product of the area through which the CPP current flows times the CPP resistance. We describe results for both non-magnetic/non-magnetic (N1/N2) an…
▽ More
We review what we have learned about the scattering of electrons by the interfaces between two different metals (M1/M2) in the current-perpendicular-to-plane (CPP) geometry. In this geometry, the intrinsic quantity is the specific resistance, AR, the product of the area through which the CPP current flows times the CPP resistance. We describe results for both non-magnetic/non-magnetic (N1/N2) and ferromagnetic/non-magnetic (F/N) pairs. We focus especially upon cases where M1/M2 are lattice matched (i.e., have the same crystal structure and the same lattice parameters to within ~ 1%), because in these cases no-free-parameter calculations of 2AR agree surprisingly well with measured values. But we also list and briefly discuss cases where M1/M2 are not lattice matched, either having different crystal structures, or lattice parameters that differ by several percent. The published calculations of 2AR in these latter cases do not agree so well with measured values.
△ Less
Submitted 4 June, 2009;
originally announced June 2009.
-
Sensitivity of Ag/Al Interface Specific Resistances to Interfacial Intermixing
Authors:
A. Sharma,
N. Theodoropoulou,
Shuai Wang,
Ke Xia,
W. P. Pratt Jr.,
J. Bass
Abstract:
We have measured an Ag/Al interface specific resistance, 2AR(Ag/Al)(111) = 1.4 fOhm-m^2, that is twice that predicted for a perfect interface, 50% larger than for a 2 ML 50%-50% alloy, and even larger than our newly predicted 1.3 fOhmm^2 for a 4 ML 50%-50% alloy. Such a large value of 2ARAg/Al(111) confirms a predicted sensitivity to interfacial disorder and suggests an interface greater than or…
▽ More
We have measured an Ag/Al interface specific resistance, 2AR(Ag/Al)(111) = 1.4 fOhm-m^2, that is twice that predicted for a perfect interface, 50% larger than for a 2 ML 50%-50% alloy, and even larger than our newly predicted 1.3 fOhmm^2 for a 4 ML 50%-50% alloy. Such a large value of 2ARAg/Al(111) confirms a predicted sensitivity to interfacial disorder and suggests an interface greater than or equal to 4 ML thick. From our calculations, a predicted anisotropy ratio, 2AR(Ag/Al)(001)/2AR(Ag/Al)(111), of more then 4 for a perfect interface, should be reduced to less than 2 for a 4 ML interface, making it harder to detect any such anisotropy.
△ Less
Submitted 4 June, 2009;
originally announced June 2009.
-
Josephson Junctions with a synthetic antiferromagnetic interlayer
Authors:
Mazin A. Khasawneh,
William P. Pratt, Jr.,
Norman O. Birge
Abstract:
We report measurements of the critical current vs. Co thickness in Nb/Cu/Co/Ru/Co/Cu/Nb Josephson junctions, where the inner Co/Ru/Co trilayer is a "synthetic antiferromagnet" with the magnetizations of the two Co layers coupled antiparallel to each other via the 0.6 nm-thick Ru layer. Due to the antiparallel magnetization alignment, the net intrinsic magnetic flux in the junction is nearly zero…
▽ More
We report measurements of the critical current vs. Co thickness in Nb/Cu/Co/Ru/Co/Cu/Nb Josephson junctions, where the inner Co/Ru/Co trilayer is a "synthetic antiferromagnet" with the magnetizations of the two Co layers coupled antiparallel to each other via the 0.6 nm-thick Ru layer. Due to the antiparallel magnetization alignment, the net intrinsic magnetic flux in the junction is nearly zero, and such junctions exhibit excellent Fraunhofer patterns in the critical current vs. applied magnetic field, even with total Co thicknesses as large as 23 nm. There are no apparent oscillations in the critical current vs. Co thickness, consistent with theoretical expectations for this situation. The critical current of the junctions decays over 4 orders of magnitude as the total Co thickness increases from 3 to 23 nm. These junctions may serve as useful templates for future explorations of spin-triplet superconducting correlations, which are predicted to occur in supercon- ducting/ferromagnetic hybrid systems in the presence of certain types of magnetic inhomogeneity.
△ Less
Submitted 13 May, 2009; v1 submitted 13 May, 2009;
originally announced May 2009.
-
Critical Current Behavior in Josephson Junctions with the Weak Ferromagnet PdNi
Authors:
Trupti S. Khaire,
W. P. Pratt, Jr.,
Norman O. Birge
Abstract:
We have studied the variation of critical current in Superconductor/Ferromagnet/Superconductor (S/F/S) Josephson Junctions as a function of ferromagnet thickness using a weakly-ferromagnetic alloy Pd82Ni12. Measurements were performed for the thickness range 32 to 100 nm, over which the critical current density decreases by five orders of magnitude. The critical current density oscillates with a…
▽ More
We have studied the variation of critical current in Superconductor/Ferromagnet/Superconductor (S/F/S) Josephson Junctions as a function of ferromagnet thickness using a weakly-ferromagnetic alloy Pd82Ni12. Measurements were performed for the thickness range 32 to 100 nm, over which the critical current density decreases by five orders of magnitude. The critical current density oscillates with a period of 12.9 +/- 0.3 nm, and decays over a characteristic length of 8.0 +/- 0.5 nm. There is no evidence of a crossover to a slower decay, which might indicate the presence of long-range spin-triplet pair correlations. We discuss possible reasons for their absence, including the possibility of strong spin flip scattering in PdNi.
△ Less
Submitted 9 January, 2009;
originally announced January 2009.
-
Specific Resistance of Pd/Ir Interfaces
Authors:
R. Acharyya,
H. Y. T. Nguyen,
R. Loloee,
W. P. Pratt Jr.,
J. Bass,
Shuai Wang,
Ke Xia
Abstract:
From measurements of the current-perpendicular-to-plane (CPP) total specific resistance (AR = area times resistance) of sputtered Pd/Ir multilayers, we derive the interface specific resistance, 2AR(Pd/Ir) = 1.02 +/- 0.06 fOhmm^2, for this metal pair with closely similar lattice parameters. Assuming a single fcc crystal structure with the average lattice parameter, no-free-parameter calculations,…
▽ More
From measurements of the current-perpendicular-to-plane (CPP) total specific resistance (AR = area times resistance) of sputtered Pd/Ir multilayers, we derive the interface specific resistance, 2AR(Pd/Ir) = 1.02 +/- 0.06 fOhmm^2, for this metal pair with closely similar lattice parameters. Assuming a single fcc crystal structure with the average lattice parameter, no-free-parameter calculations, including only spd orbitals, give for perfect interfaces, 2AR(Pd/Ir)(Perf) = 1.21 +/-0.1 fOhmm^2, and for interfaces composed of two monolayers of a random 50%-50% alloy, 2AR(Pd/Ir)(50/50) = 1.22 +/- 0.1 fOhmm^2. Within mutual uncertainties, these values fall just outside the range of the experimental value. Updating to add f-orbitals gives 2AR(Pd/Ir)(Perf) = 1.10 +/- 0.1 fOhmm^2 and 2AR(Pd/Ir)(50-50) = 1.13 +/- 0.1 fOhmm^2, values now compatible with the experimental one. We also update, with f-orbitals, calculations for other pairs
△ Less
Submitted 23 December, 2008;
originally announced December 2008.
-
Spin-Diffusion Lengths in Dilute Cu(Ge) and Ag(Sn) Alloys
Authors:
Q. Fowler,
B. Richard,
A. Sharma,
N. Theodoropoulou,
R. Loloee,
W. P. Pratt Jr.,
J. Bass
Abstract:
We use current-perpendicular-to-plane (CPP) exchange-biased spin-valves to directly measure spin diffusion lengths lsf for N = Cu(2.1 at.%Ge) and Ag(3.6 at.%Sn) alloys. We find lsf(Cu2%Ge)) = 117+10-6 nm and lsf(Ag4%Sn)= 39 +/- 3 nm. The good agreement of this lsf(Cu2%Ge) with the value lsf(Cu2%Ge) = 121 +/- 10 nm derived from an independent spin-orbit cross-section measurement for Ge in Cu, qua…
▽ More
We use current-perpendicular-to-plane (CPP) exchange-biased spin-valves to directly measure spin diffusion lengths lsf for N = Cu(2.1 at.%Ge) and Ag(3.6 at.%Sn) alloys. We find lsf(Cu2%Ge)) = 117+10-6 nm and lsf(Ag4%Sn)= 39 +/- 3 nm. The good agreement of this lsf(Cu2%Ge) with the value lsf(Cu2%Ge) = 121 +/- 10 nm derived from an independent spin-orbit cross-section measurement for Ge in Cu, quantitatively validates the use of Valet-Fert theory for CPP-MR data analysis to layer thicknesses several times larger than had been done before.
From the value of lsf(Ag4%Sn), we predict the ESR spin-orbit cross-section for Sn impurities in Ag.
△ Less
Submitted 12 September, 2008;
originally announced September 2008.
-
Ballistic vs Diffusive Transport in Current-Induced Magnetization Switching
Authors:
N. Theodoropoulou,
A. Sharma,
W. P. Pratt Jr,
J. Bass,
M. D. Stiles,
J. Xiao
Abstract:
We test whether current-induced magnetization switching due to spin-transfer-torque in ferromagnetic/non-magnetic/ferromagnetic (F/N/F) trilayers changes significantly when scattering within the N-metal layers is changed from ballistic to diffusive. Here ballistic corresponds to a ratio r = lambda/t greater than or equal to 3 for a Cu spacer layer, and diffusive to r = lambda/t less than or equa…
▽ More
We test whether current-induced magnetization switching due to spin-transfer-torque in ferromagnetic/non-magnetic/ferromagnetic (F/N/F) trilayers changes significantly when scattering within the N-metal layers is changed from ballistic to diffusive. Here ballistic corresponds to a ratio r = lambda/t greater than or equal to 3 for a Cu spacer layer, and diffusive to r = lambda/t less than or equal to 0.4 for a CuGe alloy spacer layer, where lambda is the mean-free-path in the N-layer of fixed thickness t = 10 nm. The average switching currents for the alloy spacer layer are only modestly larger than those for Cu. The best available model predicts a much greater sensitivity of the switching currents to diffuse scattering in the spacer layer than we see.
△ Less
Submitted 19 November, 2007; v1 submitted 23 August, 2007;
originally announced August 2007.
-
Spin-Diffusion Lengths in Metals and Alloys, and Spin-Flipping at Metal/Metal Interfaces: an Experimentalist's Critical Review
Authors:
Jack Bass,
William P. Pratt Jr
Abstract:
In magnetoresistive (MR) studies of magnetic multilayers composed of combinations of ferromagnetic (F) and non-magnetic (N) metals, the magnetic moment (or related 'spin') of each conduction electron plays a crucial role, supplementary to that of its charge. While initial analyses of MR in such multilayers assumed that the direction of the spin of each electron stayed fixed as the electron trans…
▽ More
In magnetoresistive (MR) studies of magnetic multilayers composed of combinations of ferromagnetic (F) and non-magnetic (N) metals, the magnetic moment (or related 'spin') of each conduction electron plays a crucial role, supplementary to that of its charge. While initial analyses of MR in such multilayers assumed that the direction of the spin of each electron stayed fixed as the electron transited the multilayer, we now know that this is true only in a certain limit. Generally, the spins 'flip' in a distance characteristic of the metal, its purity, and the temperature. They can also flip at F/N or N1/N2 interfaces. In this review we describe how to measure the lengths over which electron moments flip in pure metals and alloys, and the probability of spin-flipping at metallic interfaces. Spin-flipping within metals is described by a spin-diffusion length,l^M(sf), where the metal M = F or N. Spin-diffusion lengths are the characteristic lengths in the current-perpendicular-to-plane (CPP) and lateral non-local (LNL) geometries that we focus upon in this review. In certain simple cases, l^N(sf) sets the distance over which the CPP-MR and LNL-MR decrease as the N-layer thickness (CPP-MR) or N-film length (LNL) increases, and l^F(sf) does the same for increase of the CPP-MR with increasing F-layer thickness. Spin-flipping at M1/M2 interfaces can be described by a parameter, delta(M1/M2), which determines the spin-flipping probability, P = 1 - exp(-delta). Increasing delta(M1/M2) usually decreases the MR. We list measured values of these parameters and discuss the limitations on their determinations.
△ Less
Submitted 30 January, 2007; v1 submitted 3 October, 2006;
originally announced October 2006.
-
Observation of standard spin-switch effects in F/S/F trilayers with a strong ferromagnet
Authors:
Ion C. Moraru,
W. P. Pratt, Jr.,
Norman O. Birge
Abstract:
We have measured the superconducting transition temperature T_c of F/S/F trilayers using Permalloy (Py=Ni_84 Fe_16) as a strongly polarized ferromagnetic material. For a parallel (P) or anti-parallel (AP) alignment of the magnetization directions of the outer ferromagnets, we observe a T_c difference as large as 20 mK, with a stronger suppression of superconductivity in the P state than in the A…
▽ More
We have measured the superconducting transition temperature T_c of F/S/F trilayers using Permalloy (Py=Ni_84 Fe_16) as a strongly polarized ferromagnetic material. For a parallel (P) or anti-parallel (AP) alignment of the magnetization directions of the outer ferromagnets, we observe a T_c difference as large as 20 mK, with a stronger suppression of superconductivity in the P state than in the AP state. This behavior is opposite to the recent observations of Rusanov et al., Phys. Rev. B 73, 060505 (2006) in Py/Nb/Py trilayers, but is consistent with earlier results on trilayers with Ni or CuNi alloy as the ferromagnetic material.
△ Less
Submitted 24 August, 2006;
originally announced August 2006.
-
Magnetization-dependent $T_c$ shift in F/S/F trilayers with a strong ferromagnet
Authors:
Ion C. Moraru,
W. P. Pratt, Jr.,
Norman O. Birge
Abstract:
We have measured the superconducting transition temperature $T_c$ of Ni/Nb/Ni trilayers when the magnetizations of the two outer Ni layers are parallel (P) and antiparallel (AP). The largest difference in $T_c$ occurs when the Nb thickness is just above the critical thickness at which superconductivity disappears completely. We have observed a difference in $T_c$ between the P and AP states as l…
▽ More
We have measured the superconducting transition temperature $T_c$ of Ni/Nb/Ni trilayers when the magnetizations of the two outer Ni layers are parallel (P) and antiparallel (AP). The largest difference in $T_c$ occurs when the Nb thickness is just above the critical thickness at which superconductivity disappears completely. We have observed a difference in $T_c$ between the P and AP states as large as 41 mK - a significant increase over earlier results in samples with higher $T_c$ and with a CuNi alloy in place of the Ni. Our result also demonstrates that strong elemental ferromagnets are promising candidates for future investigations of ferromagnet/superconductor heterostructures.
△ Less
Submitted 23 December, 2005;
originally announced December 2005.
-
Comparison of Measured and Calculated Specific Resistances of Pd/Pt Interfaces
Authors:
S. K. Olson,
R. Loloee,
N. Theodoropoulou,
W. P. Pratt Jr.,
J. Bass
Abstract:
We compare specific resistances (AR equals area A times resistance R) of sputtered Pd/Pt interfaces measured in two different ways with no-free-parameter calculations. One way gives 2AR(Pd/Pt) of 0.29 (0.03) fohm-m(2) and the other 0.17 (0.13) fohm-m(2). From these we derive a best estimate of 2AR(Pd/Pt) of 0.28 (0.06) fohm-m(2), which overlaps with no-free-parameter calculations: 2AR(predicted)…
▽ More
We compare specific resistances (AR equals area A times resistance R) of sputtered Pd/Pt interfaces measured in two different ways with no-free-parameter calculations. One way gives 2AR(Pd/Pt) of 0.29 (0.03) fohm-m(2) and the other 0.17 (0.13) fohm-m(2). From these we derive a best estimate of 2AR(Pd/Pt) of 0.28 (0.06) fohm-m(2), which overlaps with no-free-parameter calculations: 2AR(predicted) of 0.30 (0.04) fohm-m(2) for flat, perfect interfaces, or 0.33 (0.04) fohm-m(2) for interfaces composed of 2 monolayers of a 50percent-50percent PdPt alloy. These results support three prior examples of agreement between calculations and measurements for pairs of metals having the same crystal structure and the same lattice parameter to within 1 percent. We also estimate the spin-flipping probability at Pd/Pt interfaces as 0.13 (0.08).
△ Less
Submitted 23 May, 2005; v1 submitted 19 May, 2005;
originally announced May 2005.
-
Manipulating Current-Induced Magnetization Switching
Authors:
S. Urazhdin,
H. Kurt,
M. AlHajDarwish,
Norman O. Birge,
W. P. Pratt Jr.,
J. Bass
Abstract:
We summarize our recent findings on how current-driven magnetization switching and magnetoresistance in nanofabricated magnetic multilayers are affected by varying the spin-scattering properties of the non-magnetic spacers, the relative orientations of the magnetic layers, and spin-dependent scattering properties of the interfaces and the bulk of the magnetic layers. We show how our data are exp…
▽ More
We summarize our recent findings on how current-driven magnetization switching and magnetoresistance in nanofabricated magnetic multilayers are affected by varying the spin-scattering properties of the non-magnetic spacers, the relative orientations of the magnetic layers, and spin-dependent scattering properties of the interfaces and the bulk of the magnetic layers. We show how our data are explained in terms of current-dependent effective magnetic temperature.
△ Less
Submitted 3 September, 2004;
originally announced September 2004.
-
Current-Induced Magnetization Switching in Permalloy-based Nanopillars with Cu, Ag, and Au
Authors:
H. Kurt,
R. Loloee,
W. P. Pratt Jr.,
J. Bass
Abstract:
We compare magnetoresistances (MR) and switching currents (I_s) at room temperature (295K) and 4.2K for Permalloy/N/Permalloy nanopillars undergoing current-induced magnetization switching (CIMS), with non-magnetic metals N = Cu, Ag, and Au. The N-metal thickness is held fixed at 10 nm. Any systematic differences in MR and I_s for the different N-metals are modest, suggesting that Ag and Au repr…
▽ More
We compare magnetoresistances (MR) and switching currents (I_s) at room temperature (295K) and 4.2K for Permalloy/N/Permalloy nanopillars undergoing current-induced magnetization switching (CIMS), with non-magnetic metals N = Cu, Ag, and Au. The N-metal thickness is held fixed at 10 nm. Any systematic differences in MR and I_s for the different N-metals are modest, suggesting that Ag and Au represent potentially viable alternatives for CIMS studies and devices to the more widely used Cu.
△ Less
Submitted 28 August, 2004;
originally announced August 2004.
-
Detecting domain wall trapping and motion at a constriction in narrow ferromagnetic wires using perpendicular-current giant magnetoresistance
Authors:
A. J. Zambano,
W. P. Pratt Jr
Abstract:
We present a versatile method for detecting the presence and motion of a trapped domain wall in a narrow ferromagnetic layer using current-perpendicular-to-plane (CPP) giant magnetoresistance (MR). The CPP-MR response to small motions of the trapped domain wall is enhanced because the CPP current is restricted to the region of wall trapping. We use a Permalloy/Cu/Permalloy spin valve in the shap…
▽ More
We present a versatile method for detecting the presence and motion of a trapped domain wall in a narrow ferromagnetic layer using current-perpendicular-to-plane (CPP) giant magnetoresistance (MR). The CPP-MR response to small motions of the trapped domain wall is enhanced because the CPP current is restricted to the region of wall trapping. We use a Permalloy/Cu/Permalloy spin valve in the shape of a long, ~500-nm-wide wire with a constriction (notch) near its middle that acts as a trapping site for a head-to-head domain wall. Two different notch shapes were studied, mostly at 4.2 K but also at 295K.
△ Less
Submitted 21 July, 2004;
originally announced July 2004.
-
Changes in magnetic scattering anisotropy at a ferromagnetic/superconducting interface
Authors:
K. Eid,
H. Kurt,
W. P. Pratt Jr.,
J. Bass
Abstract:
We show that some metals and alloys (X = Cu, Ag, FeMn, or Cu and Ag combined with each other), sputtered between ferromagnetic Co and superconducting Nb, produce no change in current-perpendicular-to-plane magnetoresistance (CPP-MR) in a carefully designed CPP-spin-valve. In contrast, other metals (Ru or Au) or combinations (Cu or Ag combined with Au, Ru, or FeMn) change the CPP-MR, in some case…
▽ More
We show that some metals and alloys (X = Cu, Ag, FeMn, or Cu and Ag combined with each other), sputtered between ferromagnetic Co and superconducting Nb, produce no change in current-perpendicular-to-plane magnetoresistance (CPP-MR) in a carefully designed CPP-spin-valve. In contrast, other metals (Ru or Au) or combinations (Cu or Ag combined with Au, Ru, or FeMn) change the CPP-MR, in some cases even reversing its sign. We ascribe these changes to activation of magnetic scattering anisotropies at a ferromagnetic/superconducting interface, apparently by strong spin-flipping between the Co and Nb layers.
△ Less
Submitted 16 April, 2004;
originally announced April 2004.
-
Giant Magnetoresistance in Multilayers with Noncollinear Magnetizations
Authors:
S. Urazhdin,
R. Loloee,
W. P. Pratt Jr
Abstract:
We study the dependence of perpendicular-current magnetoresistance in magnetic multilayers on the angle between the magnetizations of the layers. This dependence varies with the thickness of one of the layers, and is different for multilayers with two and three magnetic layers. We derive a system of equations representing an extension of the two-current series resistor model, and show that the a…
▽ More
We study the dependence of perpendicular-current magnetoresistance in magnetic multilayers on the angle between the magnetizations of the layers. This dependence varies with the thickness of one of the layers, and is different for multilayers with two and three magnetic layers. We derive a system of equations representing an extension of the two-current series resistor model, and show that the angular dependence of magnetoresistance gives information about the noncollinear spin-transport in ferromagnets.
△ Less
Submitted 17 March, 2004;
originally announced March 2004.
-
Controlled normal and inverse magnetoresistance and current-driven magnetization switching in magnetic nanopillars
Authors:
M. AlHajDarwish,
H. Kurt,
S. Urazhdin,
A. Fert,
R. Loloee,
W. P. Pratt Jr.,
J. Bass
Abstract:
Combining pairs of ferromagnetic metals with different signs of scattering anisotropies, let us independently invert the magnetoresistance and the direction of current-driven switching in ferromagnetic/non-magnetic/ferromagnetic metal nanopillars. We show all four combinations of normal and inverse behaviors, at both room temperature and 4.2K. In all cases studied, the direction of switching is…
▽ More
Combining pairs of ferromagnetic metals with different signs of scattering anisotropies, let us independently invert the magnetoresistance and the direction of current-driven switching in ferromagnetic/non-magnetic/ferromagnetic metal nanopillars. We show all four combinations of normal and inverse behaviors, at both room temperature and 4.2K. In all cases studied, the direction of switching is set by the net scattering anisotropy of the fixed (polarizing) ferromagnet. We provide simple arguments for what we see.
△ Less
Submitted 18 December, 2003;
originally announced December 2003.
-
Current-Driven Switching in Magnetic Multilayer Nanopillars
Authors:
S. Urazhdin,
Norman O. Birge,
W. P. Pratt Jr.,
J. Bass
Abstract:
We summarize our recent findings on how the current-driven magnetization switching in nanofabricated magnetic multilayers is affected by an applied magnetic field, changes of temperature, magnetic coupling between the ferromagnetic layers, variations in the multilayer structure, and the relative rotation of the layers' magnetizations. We show how these results can be interpreted with a model des…
▽ More
We summarize our recent findings on how the current-driven magnetization switching in nanofabricated magnetic multilayers is affected by an applied magnetic field, changes of temperature, magnetic coupling between the ferromagnetic layers, variations in the multilayer structure, and the relative rotation of the layers' magnetizations. We show how these results can be interpreted with a model describing current-driven excitations as an effective current-dependent magnetic temperature.
△ Less
Submitted 11 December, 2003;
originally announced December 2003.
-
Studies of dc Current-Driven Switching in Py/N/Py magnetic nanopillars
Authors:
S. Urazhdin,
W. P. Pratt Jr.,
J. Bass
Abstract:
We provide new data on current-driven switching in Permalloy (Py = Ni84Fe16) based nanopillars at room temperature and 4.2K that confirm and extend previously published work. We present data for both uncoupled and antiferromagnetically coupled samples. The latter confirm prior results for Co/Cu/Co. We show that inserting sufficiently strong spin-flip-scattering into the Cu layer eliminates hyste…
▽ More
We provide new data on current-driven switching in Permalloy (Py = Ni84Fe16) based nanopillars at room temperature and 4.2K that confirm and extend previously published work. We present data for both uncoupled and antiferromagnetically coupled samples. The latter confirm prior results for Co/Cu/Co. We show that inserting sufficiently strong spin-flip-scattering into the Cu layer eliminates hysteretic current-driven switching. This result may have ramifications for understanding current-driven switching.
△ Less
Submitted 2 December, 2003;
originally announced December 2003.
-
Inverted current-driven switching in Fe(Cr)/Cr/Fe(Cr) nanopillars
Authors:
M. AlHajDarwish,
A. Fert,
W. P. Pratt Jr,
J. Bass
Abstract:
From both theory and experiment, scattering of minority electrons is expected to be weaker than scattering of majority electrons in both dilute Fe(Cr) alloys and at Fe(Cr)/Cr interfaces. We show that Fe(Cr)/Cr/Fe(Cr) trilayer nanopillars display a normal magnetoresistance--i.e., largest resistance at low magnetic fields and smallest at high fields, but an inverted current-driven switching--i.e.,…
▽ More
From both theory and experiment, scattering of minority electrons is expected to be weaker than scattering of majority electrons in both dilute Fe(Cr) alloys and at Fe(Cr)/Cr interfaces. We show that Fe(Cr)/Cr/Fe(Cr) trilayer nanopillars display a normal magnetoresistance--i.e., largest resistance at low magnetic fields and smallest at high fields, but an inverted current-driven switching--i.e., positive current flowing from the fixed to the reversing layer switches the trilayer from higher to lower resistance, and negative current switches it from lower to higher.
△ Less
Submitted 3 November, 2003;
originally announced November 2003.
-
Studies of Current-Driven Excitations in Co/Cu/Co Trilayer Nanopillars
Authors:
S. Urazhdin,
Norman O. Birge,
W. P. Pratt Jr,
J. Bass
Abstract:
We measure the dynamic resistance of a Co/Cu/Co trilayer nanopillar at varied magnetic field $H$ and current $I$. The resistance displays the usual behavior, almost symmetric in $H$, both when magnetization switching is hysteretic at small $I,H$, and reversible at larger $I,H$. We show differences in the $I,H$ magnetization stability diagram measured by holding $I$ fixed and varying $H$ and vice…
▽ More
We measure the dynamic resistance of a Co/Cu/Co trilayer nanopillar at varied magnetic field $H$ and current $I$. The resistance displays the usual behavior, almost symmetric in $H$, both when magnetization switching is hysteretic at small $I,H$, and reversible at larger $I,H$. We show differences in the $I,H$ magnetization stability diagram measured by holding $I$ fixed and varying $H$ and vice versa. We also show how the peak in $dV/dI$ associated with telegraph noise in the reversible switching regime, is calculated from the telegraph noise variations with $I$. Lastly, we show data for a similar sample that displays behavior asymmetric in $H$, and a negative reversible switching peak instead of a usual positive one.
△ Less
Submitted 20 October, 2003;
originally announced October 2003.
-
Current-driven excitations in magnetic multilayers: a brief review
Authors:
J. Bass,
S. Urazhdin,
Norman O. Birge,
W. P. Pratt Jr
Abstract:
In 1996, Berger and Slonczewski independently predicted that a large enough spin-polarized dc current density sent perpendicularly through a ferromagnetic layer could produce magnetic excitations (spin-waves) or reversal of magnetization (switching). In the past few years, both current-driven switching and current-driven excitation of spin-waves have been observed. The switching is of potential…
▽ More
In 1996, Berger and Slonczewski independently predicted that a large enough spin-polarized dc current density sent perpendicularly through a ferromagnetic layer could produce magnetic excitations (spin-waves) or reversal of magnetization (switching). In the past few years, both current-driven switching and current-driven excitation of spin-waves have been observed. The switching is of potential technological interest for direct 'writing' of magnetic random access memory (MRAM) or magnetic media. The spin-wave generation could provide a new source of dc generated microwave radiation. We describe what has been learned experimentally about these two related phenomena, and some models being tested to explain these observations.
△ Less
Submitted 20 October, 2003;
originally announced October 2003.
-
Switching Current vs. Magnetoresistance in Magnetic Multilayer Nanopillars
Authors:
S. Urazhdin,
Norman O. Birge,
W. P. Pratt Jr.,
J. Bass
Abstract:
We study current-driven magnetization switching in nanofabricated magnetic trilayers, varying the magnetoresistance in three different ways. First, we insert a strongly spin-scattering layer between the magnetic trilayer and one of the electrodes, giving increased magnetoresistance. Second, we insert a spacer with a short spin-diffusion length between the magnetic layers, decreasing the magnetor…
▽ More
We study current-driven magnetization switching in nanofabricated magnetic trilayers, varying the magnetoresistance in three different ways. First, we insert a strongly spin-scattering layer between the magnetic trilayer and one of the electrodes, giving increased magnetoresistance. Second, we insert a spacer with a short spin-diffusion length between the magnetic layers, decreasing the magnetoresistance. Third, we vary the angle between layer magnetizations. In all cases, we find an approximately linear dependence between magnetoresistance and inverse switching current. We give a qualitative explanation for the observed behaviors, and suggest some ways in which the switching currents may be reduced.
△ Less
Submitted 8 September, 2003;
originally announced September 2003.
-
Effect of Interlayer Coupling on Current-Assisted Magnetization Switching in Nanopillars
Authors:
S. Urazhdin,
W. P. Pratt Jr,
J. Bass
Abstract:
We show that dipole-field induced antiferromagnetic coupling, or RKKY ferromagnetic coupling, between Co layers can strongly affect the low magnetic field switching behavior of Co/Cu/Co nanopillars. Whereas current-assisted switching at low fields in uncoupled nanopillars is always hysteretic, strong coupling of either kind can change the switching to non-hysteretic (reversible). These differenc…
▽ More
We show that dipole-field induced antiferromagnetic coupling, or RKKY ferromagnetic coupling, between Co layers can strongly affect the low magnetic field switching behavior of Co/Cu/Co nanopillars. Whereas current-assisted switching at low fields in uncoupled nanopillars is always hysteretic, strong coupling of either kind can change the switching to non-hysteretic (reversible). These differences can be understood with a simple picture of current-assisted thermal activation over a barrier.
△ Less
Submitted 12 April, 2003;
originally announced April 2003.
-
Effect of Antiferromagnetic Interlayer Coupling on Current-Assisted Magnetization Switching
Authors:
S. Urazhdin,
H. Kurt,
W. P. Pratt Jr,
J. Bass
Abstract:
We compare magnetization switching in Co/Cu/Co nanopillars with uncoupled and dipole-field coupled Co layers. In uncoupled nanopillars, current-driven switching is hysteretic at low magnetic field H and changes to reversible, characterized by telegraph noise, at high H. We show that dipolar coupling both affects the switching current and causes the switching to become reversible at small H. The…
▽ More
We compare magnetization switching in Co/Cu/Co nanopillars with uncoupled and dipole-field coupled Co layers. In uncoupled nanopillars, current-driven switching is hysteretic at low magnetic field H and changes to reversible, characterized by telegraph noise, at high H. We show that dipolar coupling both affects the switching current and causes the switching to become reversible at small H. The coupling thus changes the switching to reversible, hysteretic, and then reversible again as H increases. We describe our results in terms of current-assisted thermal activation.
△ Less
Submitted 28 March, 2003;
originally announced March 2003.
-
Current-Driven Magnetic Excitations in Permalloy-Based Multilayer Nanopillars
Authors:
S. Urazhdin,
Norman O. Birge,
W. P. Pratt Jr,
J. Bass
Abstract:
We study current-driven magnetization switching in nanofabricated Ni84Fe16/Cu/Ni84Fe16 trilayers at 295 K and 4.2 K. The shape of the hysteretic switching diagram at low magnetic field changes from 295 K to 4.2 K. The reversible behavior at higher field involves two phenomena, a threshold current for magnetic excitations closely correlated with the switching current, and a peak in differential r…
▽ More
We study current-driven magnetization switching in nanofabricated Ni84Fe16/Cu/Ni84Fe16 trilayers at 295 K and 4.2 K. The shape of the hysteretic switching diagram at low magnetic field changes from 295 K to 4.2 K. The reversible behavior at higher field involves two phenomena, a threshold current for magnetic excitations closely correlated with the switching current, and a peak in differential resistance characterized by telegraph noise, with average period that decreases exponentially with current and shifts with temperature. We interpret both static and dynamic results at 295 K and 4.2 K in terms of thermal activation over a potential barrier, with a current dependent effective magnetic temperature.
△ Less
Submitted 20 May, 2003; v1 submitted 8 March, 2003;
originally announced March 2003.
