-
Hydrodynamic Stokes flow induced by a chemically active patch imprinted on a planar wall
Authors:
Mihail N. Popescu,
Bogdan Adrian Nicola,
William E. Uspal,
Alvaro Domínguez,
Szilveszter Gáspár
Abstract:
Patches of catalyst imprinted on supporting walls induce motion of the fluid around them once they are supplied with the chemical species (``fuel'') that are converted by the catalytic chemical reaction. While the functioning of such chemically active micropumps is conceptually well understood, an in-depth characterization of the induced hydrodynamic flow, and in particular of its possible depende…
▽ More
Patches of catalyst imprinted on supporting walls induce motion of the fluid around them once they are supplied with the chemical species (``fuel'') that are converted by the catalytic chemical reaction. While the functioning of such chemically active micropumps is conceptually well understood, an in-depth characterization of the induced hydrodynamic flow, and in particular of its possible dependences on parameters such as material properties of the patch and the wall or the geometry of the experimental cell, remains elusive. By using a simple model for the chemical activity of a patch imprinted on a planar wall, we determine analytically the induced hydrodynamic flow in a Newtonian solution that occupies the half space above the wall supporting the patch. This can be seen as an approximation for an experimental-cell geometry with a height much larger than its diameter, the latter, in turn, being much larger than the size of the patch.) The general flow is a linear superposition of a surface-driven and a bulk-driven component; they have different topologies and, generically, each one dominates in distinct regions, with the surface-driven flow being most relevant at small heights above the wall. The surface-driven flows exhibit a somewhat unexpectedly rich behavior, including qualitative changes in the topology of the flow, as a function of the contrast in surface-chemistry (osmotic slip coefficient) between the patch and the support wall. The results are expected to provide guidance for the interpretation of the drift of tracers by the ambient flow, which is the observable usually studied in experimental investigations of chemically active micropumps.
△ Less
Submitted 18 November, 2024;
originally announced November 2024.
-
Force-dependence of the rigid-body motion for an arbitrarily shaped particle in a forced, incompressible Stokes flow
Authors:
Alvaro Domínguez,
Mihail N. Popescu
Abstract:
When a particle moves in a Newtonian flow at low Reynolds number, inertia is irrelevant and a linear relationship exists between velocities and forces. For incompressible flows, any force distribution $\mathbf{f}(\mathbf{r})$ acting in the fluid bulk induces flow and motion only through its solenoidal component. For force distributions that are spatially localized (i.e., vanish sufficiently fast a…
▽ More
When a particle moves in a Newtonian flow at low Reynolds number, inertia is irrelevant and a linear relationship exists between velocities and forces. For incompressible flows, any force distribution $\mathbf{f}(\mathbf{r})$ acting in the fluid bulk induces flow and motion only through its solenoidal component. For force distributions that are spatially localized (i.e., vanish sufficiently fast at infinity), we derive the representation of the rigid body motion as an explicit linear functional of $\nabla\times\mathbf{f}$, which complements the usual representation in terms of $\mathbf{f}$. We illustrate the utility of this alternative representation, which has the advantage of having the incompressibility constraint built-in, in avoiding certain ambiguities that arise, e.g., when implementing approximations for swimmers.
△ Less
Submitted 11 July, 2024;
originally announced July 2024.
-
Self-chemophoresis in the thin diffuse interface approximation
Authors:
Alvaro Domínguez,
Mihail N. Popescu
Abstract:
Self-chemophoresis is an appealing and quite successful interpretation of the motility exhibited by certain chemically active colloidal particles suspended in a solution of their "fuel": the particle has a phoretic response to self-generated, rather than externally imposed, inhomogeneities in the chemical composition of the solution. The postulated mechanism of chemophoresis is the interaction of…
▽ More
Self-chemophoresis is an appealing and quite successful interpretation of the motility exhibited by certain chemically active colloidal particles suspended in a solution of their "fuel": the particle has a phoretic response to self-generated, rather than externally imposed, inhomogeneities in the chemical composition of the solution. The postulated mechanism of chemophoresis is the interaction of the particle (via an adsorption potential) with the chemical inhomogeneities in the surrounding medium. When the range of this interaction is much smaller than any other relevant scale in the system, the (translational and rotational) phoretic velocities can be described in terms of a phoretic coefficient and a slip fluid velocity at the surface of the particle. Using the case of a spherical particle as a simple and physically insightful example, here we exploit an integral representation of the rigid-body motion to critically re-examine this framework. The systematic analysis highlights two steps in the approximation: first the thin-layer approximation (very large particle size), and subsequently a lubrication approximation (slow variation of the adsorption potential along the tangential direction). We also discuss how these approximations could be relaxed and the effect of this on the particle's motion.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
Chemotactic behavior for a self-phoretic Janus particle near a patch source of fuel
Authors:
Viviana Mancuso,
Mihail N. Popescu,
William E. Uspal
Abstract:
Many biological microswimmers are capable of chemotaxis, i.e., they can sense an ambient chemical gradient and adjust their mechanism of motility to move towards or away from the source of the gradient. Synthetic active colloids endowed with chemotactic behavior hold considerable promise for targeted drug delivery and the realization of programmable and reconfigurable materials. Here we study the…
▽ More
Many biological microswimmers are capable of chemotaxis, i.e., they can sense an ambient chemical gradient and adjust their mechanism of motility to move towards or away from the source of the gradient. Synthetic active colloids endowed with chemotactic behavior hold considerable promise for targeted drug delivery and the realization of programmable and reconfigurable materials. Here we study the chemotactic behavior of a Janus particle, which converts ``fuel'' molecules, released at an axisymmetric chemical patch located on a planar wall, into ``product'' molecules at its catalytic cap and moves by self-phoresis induced by the product. The chemotactic behavior is characterized as a function of the interplay between the rates of release (at the patch) and the consumption (at the particle) of fuel, as well as of details of the phoretic response of the particle (i.e., its phoretic mobility). Among others, we find that, under certain conditions, the particle is attracted to a stable ``hovering state'' in which it aligns its axis normal to the wall and rests (positions itself) at an activity-dependent distance above the center of the patch.
△ Less
Submitted 15 June, 2024;
originally announced June 2024.
-
Ionic self-phoresis maps onto correlation-induced self-phoresis
Authors:
Alvaro Domínguez,
Mihail N. Popescu
Abstract:
We re-examine the self-phoresis of a particle that releases(removes) pairs of ions into(from) the electrolyte solution. We show analytically that in the linear regime the mathematical description of this system maps onto that of the correlation-induced (self-)chemophoresis (CICP). This connection provides a unifying perspective of the two phenomena, within which one recovers and extends recent pre…
▽ More
We re-examine the self-phoresis of a particle that releases(removes) pairs of ions into(from) the electrolyte solution. We show analytically that in the linear regime the mathematical description of this system maps onto that of the correlation-induced (self-)chemophoresis (CICP). This connection provides a unifying perspective of the two phenomena, within which one recovers and extends recent predictions as particular instances of CICP. Conversely, ion-phoretic particles are identified as candidates for experimental investigations into the rich variety of motility patterns predicted by CICP.
△ Less
Submitted 25 April, 2024;
originally announced April 2024.
-
Fabrication and characterization of suspended microstructures of ultrananocrystalline diamond
Authors:
C. Pachiu,
T. Sandu,
C. Tibeica,
L. M. Veca,
R. Popa,
M. Popescu,
R. Gavrila,
C. Popov,
V. Avramescu
Abstract:
The fabrication of various suspended microstructures made from ultra-nanocrystalline diamond was performed without sacrificial layer. Arrays of bridges and cantilevers of various dimensions were successfully fabricated by a well-controlled process. Mechanical characterizations and finite element calculations allowed us to estimate both the Young's modulus as well as the residual stress built in th…
▽ More
The fabrication of various suspended microstructures made from ultra-nanocrystalline diamond was performed without sacrificial layer. Arrays of bridges and cantilevers of various dimensions were successfully fabricated by a well-controlled process. Mechanical characterizations and finite element calculations allowed us to estimate both the Young's modulus as well as the residual stress built in the ultra-nanocrystalline diamond film.
△ Less
Submitted 4 November, 2021;
originally announced November 2021.
-
Active spheres induce Marangoni flows that drive collective dynamics
Authors:
Martin Wittmann,
Mihail N. Popescu,
Alvaro Domínguez,
Juliane Simmchen
Abstract:
For monolayers of chemically active particles at a fluid interface, collective dynamics are predicted to arise owing to activity-induced Marangoni flow even if the particles are not self-propelled. Here we test this prediction by employing a monolayer of spherically symmetric active TiO_2 particles located at an oil-water interface with or without addition of a non-ionic surfactant. Due to the sph…
▽ More
For monolayers of chemically active particles at a fluid interface, collective dynamics are predicted to arise owing to activity-induced Marangoni flow even if the particles are not self-propelled. Here we test this prediction by employing a monolayer of spherically symmetric active TiO_2 particles located at an oil-water interface with or without addition of a non-ionic surfactant. Due to the spherical symmetry, an individual particle does not self-propel. However, the gradients produced by the photochemical fuel degradation give rise to long-ranged Marangoni flows. For the case in which surfactant is added to the system, we indeed observe the emergence of collective motion, with dynamics dependent on the particle coverage of the monolayer. The experimental observations are discussed within the framework of a simple theoretical mean field model.
△ Less
Submitted 7 January, 2021;
originally announced January 2021.
-
Self-motility of an active particle induced by correlations in the surrounding solution
Authors:
Alvaro Domínguez,
M. N. Popescu,
C. M. Rohwer,
S. Dietrich
Abstract:
Current models of phoretic transport rely on molecular forces creating a "diffuse" particle-fluid interface. We investigate theoretically an alternative mechanism, in which a diffuse interface emerges solely due to a non-vanishing correlation length of the surrounding solution. This mechanism can drive self-motility of a chemically active particle. Numerical estimates indicate that the velocity ca…
▽ More
Current models of phoretic transport rely on molecular forces creating a "diffuse" particle-fluid interface. We investigate theoretically an alternative mechanism, in which a diffuse interface emerges solely due to a non-vanishing correlation length of the surrounding solution. This mechanism can drive self-motility of a chemically active particle. Numerical estimates indicate that the velocity can reach micrometers per second. The predicted phenomenology includes a bilinear dependence of the velocity on the activity and a possible double velocity reversal upon varying the correlation length.
△ Less
Submitted 4 November, 2020;
originally announced November 2020.
-
Floor- or ceiling-sliding for chemically active, gyrotactic, sedimenting Janus particles
Authors:
Sayan Das,
Zohreh Jalilvand,
Mihail N. Popescu,
William E. Uspal,
Siegfried Dietrich,
Ilona Kretzschmar
Abstract:
Surface bound catalytic chemical reactions self-propel chemically active Janus particles. In the vicinity of boundaries, these particles exhibit rich behavior, such as the occurrence of wall-bound steady states of "sliding". Most active particles tend to sediment as they are density mismatched with the solution. Moreover Janus spheres, which consist of an inert core material decorated with a cap-l…
▽ More
Surface bound catalytic chemical reactions self-propel chemically active Janus particles. In the vicinity of boundaries, these particles exhibit rich behavior, such as the occurrence of wall-bound steady states of "sliding". Most active particles tend to sediment as they are density mismatched with the solution. Moreover Janus spheres, which consist of an inert core material decorated with a cap-like, thin layer of a catalyst, are gyrotactic ("bottom-heavy"). Occurrence of sliding states near the horizontal walls depends on the interplay between the active motion and the gravity-driven sedimentation and alignment. It is thus important to understand and quantify the influence of these gravity-induced effects on the behavior of model chemically active particles moving near walls. For model gyrotactic, self-phoretic Janus particles, here we study theoretically the occurrence of sliding states at horizontal planar walls that are either below ("floor") or above ("ceiling") the particle. We construct "state diagrams" characterizing the occurrence of such states as a function of the sedimentation velocity and of the gyrotactic response of the particle, as well as of the phoretic mobility of the particle. We show that in certain cases sliding states may emerge simultaneously at both the ceiling and the floor, while the larger part of the experimentally relevant parameter space corresponds to particles that would exhibit sliding states only either at the floor or at the ceiling or there are no sliding states at all. These predictions are critically compared with the results of previous experimental studies and our experiments conducted on Pt-coated polystyrene and silica-core particles suspended in aqueous hydrogen peroxide solutions.
△ Less
Submitted 22 January, 2020;
originally announced February 2020.
-
Axisymmetric spheroidal squirmers and self-diffusiophoretic particles
Authors:
Ruben Poehnl,
Mihail N. Popescu,
William E. Uspal
Abstract:
We study, by means of an exact analytical solution, the motion of a spheroidal, axisymmetric squirmer in an unbounded fluid, as well as the low Reynolds number hydrodynamic flow associated to it. In contrast to the case of a spherical squirmer --- for which, e.g., the velocity of the squirmer and the magnitude of the stresslet associated with the flow induced by the squirmer are respectively deter…
▽ More
We study, by means of an exact analytical solution, the motion of a spheroidal, axisymmetric squirmer in an unbounded fluid, as well as the low Reynolds number hydrodynamic flow associated to it. In contrast to the case of a spherical squirmer --- for which, e.g., the velocity of the squirmer and the magnitude of the stresslet associated with the flow induced by the squirmer are respectively determined by the amplitudes of the first two slip ("squirming") modes --- for the spheroidal squirmer each squirming mode either contributes to the velocity, or contributes to the stresslet. The results are straightforwardly extended to the self-phoresis of axisymmetric, spheroidal, chemically active particles in the case when the phoretic slip approximation holds.
△ Less
Submitted 6 December, 2019; v1 submitted 24 October, 2019;
originally announced October 2019.
-
Effective squirmer models for self-phoretic chemically active spherical colloids
Authors:
M. N. Popescu,
W. E. Uspal,
Z. Eskandari,
M. Tasinkevych,
S. Dietrich
Abstract:
Various aspects of self-motility of chemically active colloids in Newtonian fluids can be captured by simple models for their chemical activity plus a phoretic slip hydrodynamic boundary condition on their surface. For particles of simple shapes (e.g., spheres) -- as employed in many experimental studies -- which move at very low Reynolds numbers in an unbounded fluid, such models of chemically ac…
▽ More
Various aspects of self-motility of chemically active colloids in Newtonian fluids can be captured by simple models for their chemical activity plus a phoretic slip hydrodynamic boundary condition on their surface. For particles of simple shapes (e.g., spheres) -- as employed in many experimental studies -- which move at very low Reynolds numbers in an unbounded fluid, such models of chemically active particles effectively map onto the well studied so-called hydrodynamic squirmers [S. Michelin and E. Lauga, J. Fluid Mech. \textbf{747}, 572 (2014)]. Accordingly, intuitively appealing analogies of "pusher/puller/neutral" squirmers arise naturally. Within the framework of self-diffusiophoresis we illustrate the above mentioned mapping and the corresponding flows in an unbounded fluid for a number of choices of the activity function (i.e., the spatial distribution and the type of chemical reactions across the surface of the particle). We use the central collision of two active particles as a simple, paradigmatic case for demonstrating that in the presence of other particles or boundaries the behavior of chemically active colloids may be \textit{qualitatively} different, even in the far field, from the one exhibited by the corresponding "effective squirmer", obtained from the mapping in an unbounded fluid. This emphasizes that understanding the collective behavior and the dynamics under geometrical confinement of chemically active particles necessarily requires to explicitly account for the dependence of the hydrodynamic interactions on the distribution of chemical species resulting from the activity of the particles.
△ Less
Submitted 6 April, 2018;
originally announced April 2018.
-
Phase coexistence in a monolayer of active particles induced by Marangoni flows
Authors:
Alvaro Domínguez,
Mihail N. Popescu
Abstract:
Thermally or chemically active colloids generate thermodynamic gradients in the solution in which they are immersed and thereby induce hydrodynamic flows that affect their dynamical evolution. Here we study a mean-field model for the many-body dynamics of a monolayer of active particles located at a fluid-fluid interface. In this case, the activity of the particles creates long-ranged Marangoni fl…
▽ More
Thermally or chemically active colloids generate thermodynamic gradients in the solution in which they are immersed and thereby induce hydrodynamic flows that affect their dynamical evolution. Here we study a mean-field model for the many-body dynamics of a monolayer of active particles located at a fluid-fluid interface. In this case, the activity of the particles creates long-ranged Marangoni flows due to the response of the interface, which compete with the direct interaction between the particles. For the most interesting case of a $r^{-3}$ soft repulsion that models the electrostatic or magnetic interparticle forces, we show that an "onion-like" density distribution will develop within the monolayer. For a sufficiently large average density, two-dimensional phase transitions (freezing from liquid to hexatic, and melting from solid to hexatic) should be observable in a radially stratified structure. Furthermore, the analysis allows us to conclude that, while the activity may be too weak to allow direct detection of such induced Marangoni flows, it is relevant as a collective effect in the emergence of the experimentally observable spatial structure of phase coexistences noted above. Finally, the relevance of these results for potential experimental realizations is critically discussed.
△ Less
Submitted 4 April, 2018;
originally announced April 2018.
-
Colloidal stabilization of graphene sheets by ionizable amphiphilic block copolymers in various media
Authors:
Maria-Teodora Popescu,
Dimitrios Tasis,
Konstantinia D. Papadimitriou,
Sandra Gkermpoura,
Costas Galiotisac,
Constantinos Tsitsilianis
Abstract:
In this work, linear polystyrene-poly(2-vinylpyridine) (PS-b-P2VP) and heteroarm star PS_22P2VP_22 ionizable block copolymers were used as dispersing agents for the liquid-phase exfoliation of pristine graphene. Various strategies such as direct exfoliation, film hydration and phase transfer have been employed and compared. The best strategy involved a two-step process, namely, pre-exfoliation of…
▽ More
In this work, linear polystyrene-poly(2-vinylpyridine) (PS-b-P2VP) and heteroarm star PS_22P2VP_22 ionizable block copolymers were used as dispersing agents for the liquid-phase exfoliation of pristine graphene. Various strategies such as direct exfoliation, film hydration and phase transfer have been employed and compared. The best strategy involved a two-step process, namely, pre-exfoliation of graphite in polymer/CHCl3 solutions followed by phase transfer to acidified water. High concentrations of stable aqueous suspensions of graphene flakes, highly enriched in monolayer structures, were then obtained by using the star-shaped copolymers as stabilizers. The as-prepared graphene/copolymer hybrids were used as a filler material in order to prepare functional polymer composites for mechanical reinforcement. Such copolymer-modified graphene sheets have proven to be efficient reinforcing agents of PVA, as a significant increase of storage modulus (145% higher than that of neat PVA) was achieved even at a low graphene weight fraction of 0.1 wt%.
△ Less
Submitted 22 January, 2018;
originally announced January 2018.
-
Self-diffusiophoresis induced by fluid interfaces
Authors:
P. Malgaretti,
M. N. Popescu,
S. Dietrich
Abstract:
The influence of a fluid-fluid interface on self-phoresis of chemically active, axially symmetric, spherical colloids is analyzed. Distinct from the studies of self-phoresis for colloids trapped at fluid interfaces or in the vicinity of hard walls, here we focus on the issue of self-phoresis close to a fluid-fluid interface. In order to provide physically intuitive results highlighting the role pl…
▽ More
The influence of a fluid-fluid interface on self-phoresis of chemically active, axially symmetric, spherical colloids is analyzed. Distinct from the studies of self-phoresis for colloids trapped at fluid interfaces or in the vicinity of hard walls, here we focus on the issue of self-phoresis close to a fluid-fluid interface. In order to provide physically intuitive results highlighting the role played by the interface, the analysis is carried out for the case that the symmetry axis of the colloid is normal to the interface; moreover, thermal fluctuations are not taken into account. Similarly to what has been observed near hard walls, we find that such colloids can be set into motion even if their whole surface is homogeneously active. This is due to the anisotropy along the direction normal to the interface owing to the partitioning by diffusion, among the coexisting fluid phases, of the product of the chemical reaction taking place at the colloid surface. Different from results corresponding to hard walls, in the case of a fluid interface the direction of motion, i.e., towards the interface or away from it, can be controlled by tuning the physical properties of one of the two fluid phases. This effect is analyzed qualitatively and quantitatively, both by resorting to a far-field approximation and via an exact, analytical calculation which provides the means for a critical assessment of the approximate analysis.
△ Less
Submitted 19 January, 2018;
originally announced January 2018.
-
Shape-dependent guidance of active Janus particles by chemically patterned surfaces
Authors:
W. E. Uspal,
M. N. Popescu,
M. Tasinkevych,
S. Dietrich
Abstract:
Self-phoretic Janus particles move by inducing -- via non-equilibrium chemical reactions occurring on their surfaces -- changes in the chemical composition of the solution in which they are immersed. This process leads to gradients in chemical composition along the surface of the particle, as well as along any nearby boundaries, including solid walls. Chemical gradients along a wall can give rise…
▽ More
Self-phoretic Janus particles move by inducing -- via non-equilibrium chemical reactions occurring on their surfaces -- changes in the chemical composition of the solution in which they are immersed. This process leads to gradients in chemical composition along the surface of the particle, as well as along any nearby boundaries, including solid walls. Chemical gradients along a wall can give rise to chemi-osmosis, i.e., the gradients drive surface flows which, in turn, drive flow in the volume of the solution. This bulk flow couples back to the particle, and thus contributes to its self-motility. Since chemi-osmosis strongly depends on the molecular interactions between the diffusing molecular species and the wall, the response flow induced and experienced by a particle encodes information about any chemical patterning of the wall. Here, we extend previous studies on self-phoresis of a sphere near a chemically patterned wall to the case of particles with elongated shape. We focus our analysis on the new phenomenology potentially emerging from the coupling -- which is inoperative for a spherical shape -- of the elongated particle to the strain rate tensor of the chemi-osmotic flow. Via numerical calculations, we show that the dynamics of a rod-like particle exhibits a novel "edge-following" steady state: the particle translates along the edge of a chemical step at a steady distance from the step and with a steady orientation. Within a certain range of system parameters, the edge-following state co-exists with a "docking" state (the particle stops at the step, oriented perpendicular to the step edge), i.e., a bistable dynamics occurs. These findings are rationalized as a consequence of the competition between fluid vorticity and the rate of strain by using analytical theory based on the point-particle approximation which captures quasi-quantitatively the dynamics of the system.
△ Less
Submitted 29 November, 2017;
originally announced November 2017.
-
Chemically active colloids near osmotic-responsive walls with surface-chemistry gradients
Authors:
M. N. Popescu,
W. E. Uspal,
S. Dietrich
Abstract:
Chemically active colloids move by creating gradients in the composition of the surrounding solution and by exploiting the differences in their interactions with the various molecular species in solution. If such particles move near boundaries, e.g., the walls of the container confining the suspension, gradients in the composition of the solution are also created along the wall. This give rise to…
▽ More
Chemically active colloids move by creating gradients in the composition of the surrounding solution and by exploiting the differences in their interactions with the various molecular species in solution. If such particles move near boundaries, e.g., the walls of the container confining the suspension, gradients in the composition of the solution are also created along the wall. This give rise to chemi-osmosis (via the interactions of the wall with the molecular species forming the solution), which drives flows coupling back to the colloid and thus influences its motility. Employing an approximate "point-particle" analysis, we show analytically that -- owing to this kind of induced active response (chemi-osmosis) of the wall -- such chemically active colloids can align with, and follow, gradients in the surface chemistry of the wall. In this sense, these artificial "swimmers" exhibit a primitive form of thigmotaxis with the meaning of sensing the proximity of a (not necessarily discontinuous) physical change in the environment. We show that the alignment with the surface-chemistry gradient is generic for chemically active colloids as long as they exhibit motility in an unbounded fluid, i.e., this phenomenon does not depend on the exact details of the propulsion mechanism. The results are discussed in the context of simple models of chemical activity, corresponding to Janus particles with "source" chemical reactions on one half of the surface and either "inert" or "sink" reactions over the other half.
△ Less
Submitted 9 August, 2016;
originally announced August 2016.
-
Active colloids in the context of chemical kinetics
Authors:
G. Oshanin,
M. N. Popescu,
S. Dietrich
Abstract:
We study a mesoscopic model of a chemically active colloidal particle which on certain parts of its surface promotes chemical reactions in the surrounding solution. For reasons of simplicity and conceptual clarity, we focus on the case in which only electrically neutral species are present in the solution and on chemical reactions which are described by first order kinetics. Within a self-consiste…
▽ More
We study a mesoscopic model of a chemically active colloidal particle which on certain parts of its surface promotes chemical reactions in the surrounding solution. For reasons of simplicity and conceptual clarity, we focus on the case in which only electrically neutral species are present in the solution and on chemical reactions which are described by first order kinetics. Within a self-consistent approach we explicitly determine the steady state product and reactant number density fields around the colloid as functionals of the interaction potentials of the various molecular species in solution with the colloid. By using Teubner's reciprocal theorem, this allows us to compute and to interpret -- in a transparent way in terms of the classical Smoluchowski theory of chemical kinetics -- the external force needed to keep such a catalytically active colloid at rest (\textit{stall} force) or, equivalently, the corresponding velocity of the colloid \textit{if} it is free to move. We use the particular case of triangular-well interaction potentials as a benchmark example for applying the general theoretical framework developed here. For this latter case, we derive explicit expressions for the dependences of the quantities of interest on the diffusion coefficients of the chemical species, the reaction rate constant, the coverage by catalyst, the size of the colloid, as well as on the parameters of the interaction potentials. These expressions provide a detailed picture of the phenomenology associated with catalytically-active colloids and self-diffusiophoresis.
△ Less
Submitted 2 February, 2017; v1 submitted 19 July, 2016;
originally announced July 2016.
-
Collective dynamics of chemically active particles trapped at a fluid interface
Authors:
Alvaro Domínguez,
P. Malgaretti,
M. N. Popescu,
S. Dietrich
Abstract:
Chemically active colloids generate changes in the chemical composition of their surrounding solution and thereby induce flows in the ambient fluid which affect their dynamical evolution. Here we study the many-body dynamics of a monolayer of active particles trapped at a fluid-fluid interface. To this end we consider a mean-field model which incorporates the direct pair interaction (including als…
▽ More
Chemically active colloids generate changes in the chemical composition of their surrounding solution and thereby induce flows in the ambient fluid which affect their dynamical evolution. Here we study the many-body dynamics of a monolayer of active particles trapped at a fluid-fluid interface. To this end we consider a mean-field model which incorporates the direct pair interaction (including also the capillary interaction which is caused specifically by the interfacial trapping) as well as the effect of hydrodynamic interactions (including the Marangoni flow induced by the response of the interface to the chemical activity). The values of the relevant physical parameters for typical experimental realizations of such systems are estimated and various scenarios, which are predicted by our approach for the dynamics of the monolayer, are discussed. In particular, we show that the chemically-induced Marangoni flow can prevent the clustering instability driven by the capillary attraction.
△ Less
Submitted 27 June, 2016;
originally announced June 2016.
-
Guiding catalytically active particles with chemically patterned surfaces
Authors:
W. E. Uspal,
M. N. Popescu,
S. Dietrich,
M. Tasinkevych
Abstract:
Catalytically active Janus particles suspended in solution create gradients in the chemical composition of the solution along their surfaces, as well as along any nearby container walls. The former leads to self-phoresis, while the latter gives rise to chemi-osmosis, providing an additional contribution to self-motility. Chemi-osmosis strongly depends on the molecular interactions between the diff…
▽ More
Catalytically active Janus particles suspended in solution create gradients in the chemical composition of the solution along their surfaces, as well as along any nearby container walls. The former leads to self-phoresis, while the latter gives rise to chemi-osmosis, providing an additional contribution to self-motility. Chemi-osmosis strongly depends on the molecular interactions between the diffusing chemical species and the wall. We show analytically, using an approximate "point-particle" approach, that by chemically patterning a planar substrate one can direct the motion of Janus particles: the induced chemi-osmotic flows can cause particles to either "dock" at the chemical step between the two materials, or to follow a chemical stripe. These theoretical predictions are confirmed by full numerical calculations. Generically, docking occurs for particles which tend to move away from their catalytic caps, while stripe-following occurs in the opposite case. Our analysis reveals the physical mechanisms governing this behavior.
△ Less
Submitted 21 September, 2016; v1 submitted 13 May, 2016;
originally announced May 2016.
-
Performance of an X-ray single pixel TES microcalorimeter under DC and AC biasing
Authors:
Luciano Gottardi,
Jan van der Kuur,
Piet A. J. de Korte,
Roland Den Hartog,
Bob Dirks,
Manuela Popescu,
Henk F. C. Hoevers,
Marcel Bruijn,
Maria Parra Borderias,
Y. Takei
Abstract:
We are developing Frequency Domain Multiplexing (FDM) for the read-out of TES imaging microcalorimeter arrays for future X-ray missions like IXO. In the FDMconfiguration the TES is AC voltage biased at a well defined frequencies (between 0.3 to 10MHz) and acts as an AM modulating element. In this paper we will present a full comparison of the performance of a TES microcalorimeter under DC bias and…
▽ More
We are developing Frequency Domain Multiplexing (FDM) for the read-out of TES imaging microcalorimeter arrays for future X-ray missions like IXO. In the FDMconfiguration the TES is AC voltage biased at a well defined frequencies (between 0.3 to 10MHz) and acts as an AM modulating element. In this paper we will present a full comparison of the performance of a TES microcalorimeter under DC bias and AC bias at a frequency of 370kHz. In both cases we measured the current-to-voltage characteristics, the complex impedance, the noise, the X-ray responsivity, and energy resolution. The behaviour is very similar in both cases, but deviations in performances are observed for detector working points low in the superconducting transition (R/RN < 0.5). The measured energy resolution at 5.89keV is 2.7eV for DC bias and 3.7eV for AC bias, while the baseline resolution is 2.8eV and 3.3eV, respectively.
△ Less
Submitted 9 April, 2016;
originally announced April 2016.
-
Topographical pathways guide chemical microswimmers
Authors:
Juliane Simmchen,
Jaideep Katuri,
William E. Uspal,
Mihail N. Popescu,
Mykola Tasinkevych,
Samuel Sanchez
Abstract:
Achieving control over the directionality of active colloids is essential for their use in practical applications such as cargo carriers in microfluidic devices. So far, guidance of spherical Janus colloids was mainly realized using specially engineered magnetic multilayer coatings combined with external magnetic fields. Here, we demonstrate that step-like sub-micron topographical features can be…
▽ More
Achieving control over the directionality of active colloids is essential for their use in practical applications such as cargo carriers in microfluidic devices. So far, guidance of spherical Janus colloids was mainly realized using specially engineered magnetic multilayer coatings combined with external magnetic fields. Here, we demonstrate that step-like sub-micron topographical features can be used as reliable docking and guiding devices for chemically active spherical Janus colloids. For various topographic features (stripes, squares or circular posts) docking of the colloid at the feature edge is robust and reliable. Furthermore, the colloids move along the edges for significantly long times, which systematically increase with fuel concentration. The observed phenomenology is qualitatively captured by a simple continuum model of self-diffusiophoresis near confining boundaries, indicating that the chemical activity and associated hydrodynamic interactions with the nearby topography are the main physical ingredients behind the observed behaviour.
△ Less
Submitted 12 February, 2016;
originally announced February 2016.
-
Active colloids at fluid interfaces
Authors:
P. Malgaretti,
M. N. Popescu,
S. Dietrich
Abstract:
If an active Janus particle is trapped at the interface between a liquid and a fluid, its self-propelled motion along the interface is affected by a net torque on the particle due to the viscosity contrast between the two adjacent fluid phases. For a simple model of an active, spherical Janus colloid we analyze the conditions under which translation occurs along the interface and we provide estima…
▽ More
If an active Janus particle is trapped at the interface between a liquid and a fluid, its self-propelled motion along the interface is affected by a net torque on the particle due to the viscosity contrast between the two adjacent fluid phases. For a simple model of an active, spherical Janus colloid we analyze the conditions under which translation occurs along the interface and we provide estimates of the corresponding persistence length. We show that under certain conditions the persistence length of such a particle is significantly larger than the corresponding one in the bulk liquid, which is in line with the trends observed in recent experimental studies.
△ Less
Submitted 12 February, 2016;
originally announced February 2016.
-
Effective interaction between active colloids and fluid interfaces induced by Marangoni flows
Authors:
Alvaro Domínguez,
Paolo Malgaretti,
Mihail N. Popescu,
Siegfried Dietrich
Abstract:
We show theoretically that near a fluid-fluid interface a single active colloidal particle generating, e.g., chemicals or a temperature gradient experiences an effective force of hydrodynamic origin. This force is due to the fluid flow driven by Marangoni stresses induced by the activity of the particle; it decays very slowly with the distance from the interface, and can be attractive or repulsive…
▽ More
We show theoretically that near a fluid-fluid interface a single active colloidal particle generating, e.g., chemicals or a temperature gradient experiences an effective force of hydrodynamic origin. This force is due to the fluid flow driven by Marangoni stresses induced by the activity of the particle; it decays very slowly with the distance from the interface, and can be attractive or repulsive depending on how the activity modifies the surface tension. We show that, for typical systems, this interaction can dominate the dynamics of the particle as compared to Brownian motion, dispersion forces, or self-phoretic effects. In the attractive case, the interaction promotes the self-assembly of particles into a crystal-like monolayer at the interface.
△ Less
Submitted 15 December, 2015;
originally announced December 2015.
-
Rheotaxis of spherical active particles near a planar wall
Authors:
W. E. Uspal,
M. N. Popescu,
S. Dietrich,
M. Tasinkevych
Abstract:
For active particles the interplay between the self-generated hydrodynamic flow and an external shear flow, especially near bounding surfaces, can result in a rich behavior of the particles not easily foreseen from the consideration of the active and external driving mechanisms in isolation. For instance, under certain conditions, the particles exhibit "rheotaxis," i.e., they align their direction…
▽ More
For active particles the interplay between the self-generated hydrodynamic flow and an external shear flow, especially near bounding surfaces, can result in a rich behavior of the particles not easily foreseen from the consideration of the active and external driving mechanisms in isolation. For instance, under certain conditions, the particles exhibit "rheotaxis," i.e., they align their direction of motion with the plane of shear spanned by the direction of the flow and the normal of the bounding surface and move with or against the flow. To date, studies of rheotaxis have focused on elongated particles (e.g., spermatozoa), for which rheotaxis can be understood intuitively in terms of a "weather vane" mechanism. Here we investigate the possibility that spherical active particles, for which the "weather vane" mechanism is excluded due to the symmetry of the shape, may nevertheless exhibit rheotaxis. Combining analytical and numerical calculations, we show that, for a broad class of spherical active particles, rheotactic behavior may emerge via a mechanism which involves "self-trapping" near a hard wall owing to the active propulsion of the particles, combined with their rotation, alignment, and "locking" of the direction of motion into the shear plane. In this state, the particles move solely up- or downstream at a steady height and orientation.
△ Less
Submitted 8 March, 2016; v1 submitted 16 February, 2015;
originally announced February 2015.
-
Self-propulsion of a catalytically active particle near a planar wall: from reflection to sliding and hovering
Authors:
W. E. Uspal,
M. N. Popescu,
S. Dietrich,
M. Tasinkevych
Abstract:
Micron-sized particles moving through solution in response to self-generated chemical gradients serve as model systems for studying active matter. Their far-reaching potential applications will require the particles to sense and respond to their local environment in a robust manner. The self-generated hydrodynamic and chemical fields, which induce particle motion, probe and are modified by that ve…
▽ More
Micron-sized particles moving through solution in response to self-generated chemical gradients serve as model systems for studying active matter. Their far-reaching potential applications will require the particles to sense and respond to their local environment in a robust manner. The self-generated hydrodynamic and chemical fields, which induce particle motion, probe and are modified by that very environment, including confining boundaries. Focusing on a catalytically active Janus particle as a paradigmatic example, we predict that near a hard planar wall such a particle exhibits several scenarios of motion: reflection from the wall, motion at a steady-state orientation and height above the wall, or motionless, steady "hovering." Concerning the steady states, the height and the orientation are determined both by the proportion of catalyst coverage and the interactions of the solutes with the different "faces" of the particle. Accordingly, we propose that a desired behavior can be selected by tuning these parameters via a judicious design of the particle surface chemistry.
△ Less
Submitted 8 March, 2016; v1 submitted 11 July, 2014;
originally announced July 2014.
-
Precursor films in wetting phenomena
Authors:
M. N. Popescu,
G. Oshanin,
S. Dietrich,
A. -M. Cazabat
Abstract:
The spontaneous spreading of non-volatile liquid droplets on solid substrates poses a classic problem in the context of wetting phenomena. It is well known that the spreading of a macroscopic droplet is in many cases accompanied by a thin film of macroscopic lateral extent, the so-called precursor film, which emanates from the three-phase contact line region and spreads ahead of the latter with a…
▽ More
The spontaneous spreading of non-volatile liquid droplets on solid substrates poses a classic problem in the context of wetting phenomena. It is well known that the spreading of a macroscopic droplet is in many cases accompanied by a thin film of macroscopic lateral extent, the so-called precursor film, which emanates from the three-phase contact line region and spreads ahead of the latter with a much higher speed. Such films have been usually associated with liquid-on-solid systems, but in the last decade similar films have been reported to occur in solid-on-solid systems. While the situations in which the thickness of such films is of mesoscopic size are rather well understood, an intriguing and yet to be fully understood aspect is the spreading of microscopic, i.e., molecularly thin films. Here we review the available experimental observations of such films in various liquid-on-solid and solid-on-solid systems, as well as the corresponding theoretical models and studies aimed at understanding their formation and spreading dynamics. Recent developments and perspectives for future research are discussed.
△ Less
Submitted 14 June, 2012; v1 submitted 7 May, 2012;
originally announced May 2012.
-
Pulling and Pushing a Cargo With a Catalytically Active Carrier
Authors:
M. N. Popescu,
M. Tasinkevych,
S. Dietrich
Abstract:
Catalytically active particles suspended in a liquid can move due to self-phoresis by generating solute gradients via chemical reactions of the solvent occurring at parts of their surface. Such particles can be used as carriers at the micro-scale. As a simple model for a carrier-cargo system we consider a catalytically active particle connected by a thin rigid rod to a catalytically inert cargo pa…
▽ More
Catalytically active particles suspended in a liquid can move due to self-phoresis by generating solute gradients via chemical reactions of the solvent occurring at parts of their surface. Such particles can be used as carriers at the micro-scale. As a simple model for a carrier-cargo system we consider a catalytically active particle connected by a thin rigid rod to a catalytically inert cargo particle. We show that the velocity of the composite strongly depends on the relative orientation of the carrier-cargo link. Accordingly, there is an optimal configuration for the linkage. The subtlety of such carriers is underscored by the observation that a spherical particle completely covered by catalyst, which is motionless when isolated, acts as a carrier once attached to a cargo.
△ Less
Submitted 31 May, 2011;
originally announced June 2011.
-
Phoretic Motion of Spheroidal Particles Due To Self-Generated Solute Gradients
Authors:
M. N. Popescu,
S. Dietrich,
M. Tasinkevych,
J. Ralston
Abstract:
We study theoretically the phoretic motion of a spheroidal particle, which generates solute gradients in the surrounding unbounded solvent via chemical reactions active on its surface in a cap-like region centered at one of the poles of the particle. We derive, within the constraints of the mapping to classical diffusio-phoresis, an analytical expression for the phoretic velocity of such an obje…
▽ More
We study theoretically the phoretic motion of a spheroidal particle, which generates solute gradients in the surrounding unbounded solvent via chemical reactions active on its surface in a cap-like region centered at one of the poles of the particle. We derive, within the constraints of the mapping to classical diffusio-phoresis, an analytical expression for the phoretic velocity of such an object. This allows us to analyze in detail the dependence of the velocity on the aspect ratio of the polar and the equatorial diameters of the particle and on the fraction of the particle surface contributing to the chemical reaction. The particular cases of a sphere and of an approximation for a needle-like particle, which are the most common shapes employed in experimental realizations of such self-propelled objects, are obtained from the general solution in the limits that the aspect ratio approaches one or becomes very large, respectively.
△ Less
Submitted 10 March, 2010;
originally announced March 2010.
-
Confinement effects on diffusiophoretic self-propellers
Authors:
M. N. Popescu,
S. Dietrich,
G. Oshanin
Abstract:
We study theoretically the effects of spatial confinement on the phoretic motion of a dissolved particle driven by composition gradients generated by chemical reactions of its solvent, which are active only on certain parts of the particle surface. We show that the presence of confining walls increases in a similar way both the composition gradients and the viscous friction, and the overall resu…
▽ More
We study theoretically the effects of spatial confinement on the phoretic motion of a dissolved particle driven by composition gradients generated by chemical reactions of its solvent, which are active only on certain parts of the particle surface. We show that the presence of confining walls increases in a similar way both the composition gradients and the viscous friction, and the overall result of these competing effects is an increase in the phoretic velocity of the particle. For the case of steric repulsion only between the particle and the product molecules of the chemical reactions, the absolute value of the velocity remains nonetheless rather small.
△ Less
Submitted 22 April, 2009;
originally announced April 2009.
-
Confinement-induced enhancement of diffusiophoretic forces on self-propellers
Authors:
M. N. Popescu,
S. Dietrich,
G. Oshanin
Abstract:
We study the effect of spatial confinement on the strength of propulsive diffusiophoretic forces acting on a particle that generates density gradients by exploiting the chemical free energy of its environment. Using a recently proposed simple model of a self-propelling device driven by chemical reactions taking place on some parts of its surface, we demonstrate that the force significantly incre…
▽ More
We study the effect of spatial confinement on the strength of propulsive diffusiophoretic forces acting on a particle that generates density gradients by exploiting the chemical free energy of its environment. Using a recently proposed simple model of a self-propelling device driven by chemical reactions taking place on some parts of its surface, we demonstrate that the force significantly increases in the presence of confining walls. We also show that such effects become even more pronounced in two-dimensional systems.
△ Less
Submitted 14 September, 2007;
originally announced September 2007.
-
Spreading in narrow channels
Authors:
C. Dotti,
A. Gambassi,
M. N. Popescu,
S. Dietrich
Abstract:
We study a lattice model for the spreading of fluid films, which are a few molecular layers thick, in narrow channels with inert lateral walls. We focus on systems connected to two particle reservoirs at different chemical potentials, considering an attractive substrate potential at the bottom, confining side walls, and hard-core repulsive fluid-fluid interactions. Using kinetic Monte Carlo simu…
▽ More
We study a lattice model for the spreading of fluid films, which are a few molecular layers thick, in narrow channels with inert lateral walls. We focus on systems connected to two particle reservoirs at different chemical potentials, considering an attractive substrate potential at the bottom, confining side walls, and hard-core repulsive fluid-fluid interactions. Using kinetic Monte Carlo simulations we find a diffusive behavior. The corresponding diffusion coefficient depends on the density and is bounded from below by the free one-dimensional diffusion coefficient, valid for an inert bottom wall. These numerical results are rationalized within the corresponding continuum limit.
△ Less
Submitted 29 January, 2007;
originally announced January 2007.
-
Binary Reactive Adsorbate on a Random Catalytic Substrate
Authors:
M. N. Popescu,
S. Dietrich,
G. Oshanin
Abstract:
We study the equilibrium properties of a model for a binary mixture of catalytically-reactive monomers adsorbed on a two-dimensional substrate decorated by randomly placed catalytic bonds. The interacting $A$ and $B$ monomer species undergo continuous exchanges with particle reservoirs and react ($A + B \to \emptyset$) as soon as a pair of unlike particles appears on sites connected by a catalyt…
▽ More
We study the equilibrium properties of a model for a binary mixture of catalytically-reactive monomers adsorbed on a two-dimensional substrate decorated by randomly placed catalytic bonds. The interacting $A$ and $B$ monomer species undergo continuous exchanges with particle reservoirs and react ($A + B \to \emptyset$) as soon as a pair of unlike particles appears on sites connected by a catalytic bond.
For the case of annealed disorder in the placement of the catalytic bonds this model can be mapped onto a classical spin model with spin values $S = -1,0,+1$, with effective couplings dependent on the temperature and on the mean density $q$ of catalytic bonds. This allows us to exploit the mean-field theory developed for the latter to determine the phase diagram as a function of $q$ in the (symmetric) case in which the chemical potentials of the particle reservoirs, as well as the $A-A$ and $B-B$ interactions are equal.
△ Less
Submitted 31 July, 2006;
originally announced July 2006.
-
Diffusive spreading and mixing of fluid monolayers
Authors:
M. N. Popescu,
S. Dietrich,
G. Oshanin
Abstract:
The use of ultra-thin, i.e., monolayer films plays an important role for the emerging field of nano-fluidics. Since the dynamics of such films is governed by the interplay between substrate-fluid and fluid-fluid interactions, the transport of matter in nanoscale devices may be eventually efficiently controlled by substrate engineering. For such films, the dynamics is expected to be captured by t…
▽ More
The use of ultra-thin, i.e., monolayer films plays an important role for the emerging field of nano-fluidics. Since the dynamics of such films is governed by the interplay between substrate-fluid and fluid-fluid interactions, the transport of matter in nanoscale devices may be eventually efficiently controlled by substrate engineering. For such films, the dynamics is expected to be captured by two-dimensional lattice-gas models with interacting particles. Using a lattice gas model and the non-linear diffusion equation derived from the microscopic dynamics in the continuum limit, we study two problems of relevance in the context of nano-fluidics. The first one is the case in which along the spreading direction of a monolayer a mesoscopic-sized obstacle is present, with a particular focus on the relaxation of the fluid density profile upon encountering and passing the obstacle. The second one is the mixing of two monolayers of different particle species which spread side by side following the merger of two chemical lanes, here defined as domains of high affinity for fluid adsorption surrounded by domains of low affinity for fluid adsorption.
△ Less
Submitted 27 June, 2005;
originally announced June 2005.
-
Exactly Solvable Model of Monomer-Monomer Reactions on a Two-Dimensional Random Catalytic Substrate
Authors:
G. Oshanin,
M. N. Popescu,
S. Dietrich
Abstract:
We present an \textit{exactly solvable} model of a monomer-monomer $A + B \to \emptyset$ reaction on a 2D inhomogeneous, catalytic substrate and study the equilibrium properties of the two-species adsorbate. The substrate contains randomly placed catalytic bonds of mean density $q$ which connect neighboring adsorption sites. The interacting $A$ and $B$ (monomer) species undergo continuous exchan…
▽ More
We present an \textit{exactly solvable} model of a monomer-monomer $A + B \to \emptyset$ reaction on a 2D inhomogeneous, catalytic substrate and study the equilibrium properties of the two-species adsorbate. The substrate contains randomly placed catalytic bonds of mean density $q$ which connect neighboring adsorption sites. The interacting $A$ and $B$ (monomer) species undergo continuous exchanges with corresponding adjacent gaseous reservoirs. A reaction $A + B \to \emptyset$ takes place instantaneously if $A$ and $B$ particles occupy adsorption sites connected by a catalytic bond. We find that for the case of \textit{annealed} disorder in the placement of the catalytic bonds the reaction model under study can be mapped onto the general spin $S = 1$ (GS1) model. Here we concentrate on a particular case in which the model reduces to an exactly solvable Blume-Emery-Griffiths (BEG) model (T. Horiguchi, Phys. Lett. A {\bf 113}, 425 (1986); F.Y. Wu, Phys. Lett. A, {\bf 116}, 245 (1986)) and derive an exact expression for the disorder-averaged equilibrium pressure of the two-species adsorbate. We show that at equal partial vapor pressures of the $A$ and $B$ species this system exhibits a second-order phase transition which reflects a spontaneous symmetry breaking with large fluctuations and progressive coverage of the entire substrate by either one of the species.
△ Less
Submitted 27 November, 2003;
originally announced November 2003.
-
Model for Spreading of Liquid Monolayers
Authors:
M. N. Popescu,
S. Dietrich
Abstract:
Manipulating fluids at the nanoscale within networks of channels or chemical lanes is a crucial challenge in developing small scale devices to be used in microreactors or chemical sensors. In this context, ultra-thin (i.e., monolayer) films, experimentally observed in spreading of nano-droplets or upon extraction from reservoirs in capillary rise geometries, represent an extreme limit which is o…
▽ More
Manipulating fluids at the nanoscale within networks of channels or chemical lanes is a crucial challenge in developing small scale devices to be used in microreactors or chemical sensors. In this context, ultra-thin (i.e., monolayer) films, experimentally observed in spreading of nano-droplets or upon extraction from reservoirs in capillary rise geometries, represent an extreme limit which is of physical and technological relevance since the dynamics is governed solely by capillary forces. In this work we use kinetic Monte Carlo (KMC) simulations to analyze in detail a simple, but realistic model proposed by Burlatsky \textit{et al.} \cite{Burlatsky_prl96,Oshanin_jml} for the two-dimensional spreading on homogeneous substrates of a fluid monolayer which is extracted from a reservoir. Our simulations confirm the previously predicted time-dependence of the spreading, $X(t \to \infty) = A \sqrt t$, with $X(t)$ as the average position of the advancing edge at time $t$, and they reveal a non-trivial dependence of the prefactor $A$ on the strength $U_0$ of inter-particle attraction and on the fluid density $C_0$ at the reservoir as well as an $U_0$-dependent spatial structure of the density profile of the monolayer. The asymptotic density profile at long time and large spatial scale is carefully analyzed within the continuum limit. We show that including the effect of correlations in an effective manner into the standard mean-field description leads to predictions both for the value of the threshold interaction above which phase segregation occurs and for the density profiles in excellent agreement with KMC simulations results.
△ Less
Submitted 31 October, 2003;
originally announced October 2003.
-
Anisotropic Diffusion Limited Aggregation
Authors:
M. N. Popescu,
H. G. E. Hentschel,
F. Family
Abstract:
Using stochastic conformal mappings we study the effects of anisotropic perturbations on diffusion limited aggregation (DLA) in two dimensions. The harmonic measure of the growth probability for DLA can be conformally mapped onto a constant measure on a unit circle. Here we map $m$ preferred directions for growth of angular width $σ$ to a distribution on the unit circle which is a periodic funct…
▽ More
Using stochastic conformal mappings we study the effects of anisotropic perturbations on diffusion limited aggregation (DLA) in two dimensions. The harmonic measure of the growth probability for DLA can be conformally mapped onto a constant measure on a unit circle. Here we map $m$ preferred directions for growth of angular width $σ$ to a distribution on the unit circle which is a periodic function with $m$ peaks in $[-π, π)$ such that the width $σ$ of each peak scales as $σ\sim 1/\sqrt{k}$, where $k$ defines the ``strength'' of anisotropy along any of the $m$ chosen directions. The two parameters $(m,k)$ map out a parameter space of perturbations that allows a continuous transition from DLA (for $m=0$ or $k=0$) to $m$ needle-like fingers as $k \to \infty$. We show that at fixed $m$ the effective fractal dimension of the clusters $D(m,k)$ obtained from mass-radius scaling decreases with increasing $k$ from $D_{DLA} \simeq 1.71$ to a value bounded from below by $D_{min} = 3/2$. Scaling arguments suggest a specific form for the dependence of the fractal dimension $D(m,k)$ on $k$ for large $k$, form which compares favorably with numerical results.
△ Less
Submitted 20 July, 2003;
originally announced July 2003.
-
Diffusion Limited Aggregation with Power-Law Pinning
Authors:
H. G. E. Hentschel,
M. N. Popescu,
F. Family
Abstract:
Using stochastic conformal mapping techniques we study the patterns emerging from Laplacian growth with a power-law decaying threshold for growth $R_N^{-γ}$ (where $R_N$ is the radius of the $N-$ particle cluster). For $γ> 1$ the growth pattern is in the same universality class as diffusion limited aggregation (DLA) growth, while for $γ< 1$ the resulting patterns have a lower fractal dimension…
▽ More
Using stochastic conformal mapping techniques we study the patterns emerging from Laplacian growth with a power-law decaying threshold for growth $R_N^{-γ}$ (where $R_N$ is the radius of the $N-$ particle cluster). For $γ> 1$ the growth pattern is in the same universality class as diffusion limited aggregation (DLA) growth, while for $γ< 1$ the resulting patterns have a lower fractal dimension $D(γ)$ than a DLA cluster due to the enhancement of growth at the hot tips of the developing pattern. Our results indicate that a pinning transition occurs at $γ= 1/2$, significantly smaller than might be expected from the lower bound $α_{min} \simeq 0.67$ of multifractal spectrum of DLA. This limiting case shows that the most singular tips in the pruned cluster now correspond to those expected for a purely one-dimensional line. Using multifractal analysis, analytic expressions are established for $D(γ)$ both close to the breakdown of DLA universality class, i.e., $γ\lesssim 1$, and close to the pinning transition, i.e., $γ\gtrsim 1/2$.
△ Less
Submitted 20 July, 2003;
originally announced July 2003.
-
Asymptotic Capture-Number and Island-Size Distributions for One-Dimensional Irreversible Submonolayer Growth
Authors:
J. G. Amar,
M. N. Popescu
Abstract:
Using a set of evolution equations [J.G. Amar {\it et al}, Phys. Rev. Lett. {\bf 86}, 3092 (2001)] for the average gap-size between islands, we calculate analytically the asymptotic scaled capture-number distribution (CND) for one-dimensional irreversible submonolayer growth of point islands. The predicted asymptotic CND is in reasonably good agreement with kinetic Monte-Carlo (KMC) results and…
▽ More
Using a set of evolution equations [J.G. Amar {\it et al}, Phys. Rev. Lett. {\bf 86}, 3092 (2001)] for the average gap-size between islands, we calculate analytically the asymptotic scaled capture-number distribution (CND) for one-dimensional irreversible submonolayer growth of point islands. The predicted asymptotic CND is in reasonably good agreement with kinetic Monte-Carlo (KMC) results and leads to a \textit{non-divergent asymptotic} scaled island-size distribution (ISD). We then show that a slight modification of our analytical form leads to an analytic expression for the asymptotic CND and a resulting asymptotic ISD which are in excellent agreement with KMC simulations. We also show that in the asymptotic limit the self-averaging property of the capture zones holds exactly while the asymptotic scaled gap distribution is equal to the scaled CND.
△ Less
Submitted 11 July, 2003;
originally announced July 2003.
-
Equilibrium Properties of A Monomer-Monomer Catalytic Reaction on A One-Dimensional Chain
Authors:
G. Oshanin,
M. N. Popescu,
S. Dietrich
Abstract:
We study the equilibrium properties of a lattice-gas model of an $A + B \to 0$ catalytic reaction on a one-dimensional chain in contact with a reservoir for the particles. The particles of species $A$ and $B$ are in thermal contact with their vapor phases acting as reservoirs, i.e., they may adsorb onto empty lattice sites and may desorb from the lattice. If adsorbed $A$ and $B$ particles appear…
▽ More
We study the equilibrium properties of a lattice-gas model of an $A + B \to 0$ catalytic reaction on a one-dimensional chain in contact with a reservoir for the particles. The particles of species $A$ and $B$ are in thermal contact with their vapor phases acting as reservoirs, i.e., they may adsorb onto empty lattice sites and may desorb from the lattice. If adsorbed $A$ and $B$ particles appear at neighboring lattice sites they instantaneously react and both desorb. For this model of a catalytic reaction in the adsorption-controlled limit, we derive analytically the expression of the pressure and present exact results for the mean densities of particles and for the compressibilities of the adsorbate as function of the chemical potentials of the two species.
△ Less
Submitted 19 January, 2003;
originally announced January 2003.
-
Disorder Induced Diffusive Transport In Ratchets
Authors:
M. N. Popescu,
C. M. Arizmendi,
A. L. Salas-Brito,
F. Family
Abstract:
The effects of quenched disorder on the overdamped motion of a driven particle on a periodic, asymmetric potential is studied. While for the unperturbed potential the transport is due to a regular drift, the quenched disorder induces a significant additional chaotic ``diffusive'' motion. The spatio-temporal evolution of the statistical ensemble is well described by a Gaussian distribution, imply…
▽ More
The effects of quenched disorder on the overdamped motion of a driven particle on a periodic, asymmetric potential is studied. While for the unperturbed potential the transport is due to a regular drift, the quenched disorder induces a significant additional chaotic ``diffusive'' motion. The spatio-temporal evolution of the statistical ensemble is well described by a Gaussian distribution, implying a chaotic transport in the presence of quenched disorder.
△ Less
Submitted 11 February, 2000;
originally announced February 2000.