-
To reset or not to reset in a finite domain: that is the question
Authors:
Gregorio García-Valladares,
Antonio Prados,
Alessandro Manacorda,
Carlos A. Plata
Abstract:
We investigate the search of a target with a given spatial distribution in a finite one-dimensional domain. The searcher follows Brownian dynamics and is always reset to its initial position when reaching the boundaries of the domain (boundary resetting). In addition, the searcher may be reset to its initial position from any internal point of the domain (bulk resetting). Specifically, we look for…
▽ More
We investigate the search of a target with a given spatial distribution in a finite one-dimensional domain. The searcher follows Brownian dynamics and is always reset to its initial position when reaching the boundaries of the domain (boundary resetting). In addition, the searcher may be reset to its initial position from any internal point of the domain (bulk resetting). Specifically, we look for the optimal strategy for bulk resetting, i.e., the spatially dependent bulk resetting rate that minimizes the average search time. The best search strategy exhibits a second-order transition from vanishing to non-vanishing bulk resetting when varying the target distribution. The obtained mathematical criteria are further analyzed for a monoparametric family of distributions, to shed light on the properties that control the optimal strategy for bulk resetting. Our work paves new research lines in the study of search processes, emphasizing the relevance of the target distribution for the optimal search strategy, and identifies a successful framework to address these questions.
△ Less
Submitted 22 May, 2025;
originally announced May 2025.
-
Maximum power Stirling-like heat engine with a harmonically confined Brownian particle
Authors:
Irene Prieto-Rodríguez,
Antonio Prados,
Carlos A. Plata
Abstract:
Heat engines transform thermal energy into useful work, operating in a cyclic manner. For centuries, they have played a key role in industrial and technological development. Historically, only gases and liquids have been used as working substances, but the technical advances achieved over the past decades allow for expanding the experimental possibilities and designing engines operating with a sin…
▽ More
Heat engines transform thermal energy into useful work, operating in a cyclic manner. For centuries, they have played a key role in industrial and technological development. Historically, only gases and liquids have been used as working substances, but the technical advances achieved over the past decades allow for expanding the experimental possibilities and designing engines operating with a single particle. In this case, the system of interest cannot be addressed at a macroscopic level and their study is framed in the field of stochastic thermodynamics. In the present work, we study mesoscopic heat engines built with a Brownian particle submitted to harmonic confinement and immersed in a fluid acting as a thermal bath. We design a Stirling-like heat engine, composed of two isothermal and two isochoric branches, by controlling both the stiffness of the harmonic trap and the temperature of the bath. Specifically, we focus on the irreversible, non quasi-static, case -- whose finite duration enables the engine to deliver a non-zero output power. This is a crucial aspect, which enables the optimisation of the thermodynamic cycle by maximising the delivered power -- thereby addressing a key goal at the practical level. The optimal driving protocols are obtained by using both variational calculus and optimal control theory tools. Also, we numerically explore the dependence of the maximum output power and the corresponding efficiency on the system parameters.
△ Less
Submitted 13 January, 2025; v1 submitted 11 December, 2024;
originally announced December 2024.
-
Optimal control of levitated nanoparticles through finite-stiffness confinement
Authors:
Marco Baldovin,
Ines Ben Yedder,
Carlos A. Plata,
Damien Raynal,
Loïc Rondin,
Emmanuel Trizac,
Antonio Prados
Abstract:
Optimal control of levitated particles subject to thermal fluctuations is a challenging problem, both from the theoretical and the experimental perspective. In this paper we compute the time-dependent harmonic confining potential that steers a Brownian particle between two assigned equilibrium states, in a prescribed time, with the minimum energetic cost. In our analysis we do not neglect inertial…
▽ More
Optimal control of levitated particles subject to thermal fluctuations is a challenging problem, both from the theoretical and the experimental perspective. In this paper we compute the time-dependent harmonic confining potential that steers a Brownian particle between two assigned equilibrium states, in a prescribed time, with the minimum energetic cost. In our analysis we do not neglect inertial effects (thus addressing the general underdamped dynamics) and we assume, motivated by the experiments, that the stiffness of the confining potential cannot exceed prescribed bounds. We report the results of an experiment realizing the described protocol for an optically confined nanoparticle. The system is shown to reach the target state within accuracy, while spending less energy than other protocols that require the same time. The optimal protocol is also compared to an abrupt change of the confining stiffness, the latter involving an exponential relaxation to the target equilibrium state. Not only does our optimal protocol reach the target state in a finite time but it does so in a time significantly shorter than the characteristic timescale of the direct relaxation. The results presented in this paper are expected to have relevant applications in the design of optimal devices, e.g. engines at the nanoscale.
△ Less
Submitted 31 July, 2024;
originally announced August 2024.
-
Minimum time connection between non-equilibrium steady states: the Brownian gyrator
Authors:
A. Patrón,
C. A. Plata,
A. Prados
Abstract:
We study the problem of minimising the connection time between non-equilibrium steady states of the Brownian Gyrator. This is a paradigmatic model in non-equilibrium statistical mechanics, an overdamped Brownian particle trapped in a two-dimensional elliptical potential, with the two degrees of freedom $(x,y)$ coupled to two, in principle different, thermal baths with temperatures $T_x$ and $T_y$,…
▽ More
We study the problem of minimising the connection time between non-equilibrium steady states of the Brownian Gyrator. This is a paradigmatic model in non-equilibrium statistical mechanics, an overdamped Brownian particle trapped in a two-dimensional elliptical potential, with the two degrees of freedom $(x,y)$ coupled to two, in principle different, thermal baths with temperatures $T_x$ and $T_y$, respectively. Application of Pontryagin's Maximum Principle reveals that shortest protocols belong to the boundaries of the control set defined by the limiting values of the parameters $(k,u)$ characterising the elliptical potential. We identify two classes of optimal minimum time protocols, i.e. brachistochrones: (i) regular bang-bang protocols, for which $(k,u)$ alternatively take their minimum and maximum values allowed, and (ii) infinitely degenerate singular protocols. We thoroughly investigate the minimum connection time over the brachistochrones in the limit of having infinite capacity for compression. A plethora of striking phenomena emerge: sets of states attained at null connection times, discontinuities in the connection time along adjacent target states, and the fact that, starting from a state in which the oscillators are coupled, uncoupled states are impossible to reach in a finite time.
△ Less
Submitted 22 March, 2025; v1 submitted 30 July, 2024;
originally announced July 2024.
-
Optimal synchronisation to a limit cycle
Authors:
C. Ríos-Monje,
C. A. Plata,
D. Guéry-Odelin,
A. Prados
Abstract:
In the absence of external forcing, all trajectories on the phase plane of the van der Pol oscillator tend to a closed, periodic, trajectory -- the limit cycle -- after infinite time. Here, we drive the van der Pol oscillator with an external time-dependent force to reach the limit cycle in a given finite time. Specifically, we are interested in minimising the non-conservative contribution to the…
▽ More
In the absence of external forcing, all trajectories on the phase plane of the van der Pol oscillator tend to a closed, periodic, trajectory -- the limit cycle -- after infinite time. Here, we drive the van der Pol oscillator with an external time-dependent force to reach the limit cycle in a given finite time. Specifically, we are interested in minimising the non-conservative contribution to the work when driving the system from a given initial point on the phase plane to any final point belonging to the limit cycle. There appears a speed limit inequality, which expresses a trade-off between the connection time and cost -- in terms of the non-conservative work. We show how the above results can be { generalized to the broader family of non-linear oscillators given by} the Liénard equation. Finally, we also look into the problem of minimising the total work done by the external force.
△ Less
Submitted 10 October, 2024; v1 submitted 3 July, 2024;
originally announced July 2024.
-
Stochastic resetting with refractory periods: pathway formulation and exact results
Authors:
Gregorio García-Valladares,
Deepak Gupta,
Antonio Prados,
Carlos A. Plata
Abstract:
We look into the problem of stochastic resetting with refractory periods. The model dynamics comprises diffusive and motionless phases. The diffusive phase ends at random time instants, at which the system is reset to a given position -- where the system remains at rest for a random time interval, termed the refractory period. A pathway formulation is introduced to derive exact analytical results…
▽ More
We look into the problem of stochastic resetting with refractory periods. The model dynamics comprises diffusive and motionless phases. The diffusive phase ends at random time instants, at which the system is reset to a given position -- where the system remains at rest for a random time interval, termed the refractory period. A pathway formulation is introduced to derive exact analytical results for the relevant observables in a broad framework, with the resetting time and the refractory period following arbitrary distributions. For the paradigmatic case of Poissonian distributions of the resetting and refractory times, in general with different characteristic rates, closed-form expressions are obtained that successfully describe the relaxation to the steady state. Finally, we focus on the single-target search problem, in which the survival probability and the mean first passage time to the target can be exactly computed. Therein, we also discuss optimal strategies, which show a non-trivial dependence on the refractory period.
△ Less
Submitted 21 March, 2024; v1 submitted 30 October, 2023;
originally announced October 2023.
-
Non-equilibrium memory effects: granular fluids and beyond
Authors:
A Patrón,
B. Sánchez-Rey,
C. A. Plata,
A. Prados
Abstract:
In this perspective paper, we look into memory effects in out-of-equilibrium systems. To be concrete, we exemplify memory effects with the paradigmatic case of granular fluids, although extensions to other contexts such as molecular fluids with non-linear drag are also considered. The focus is put on two archetypal memory effects: the Kovacs and Mpemba effects. In brief, the first is related to im…
▽ More
In this perspective paper, we look into memory effects in out-of-equilibrium systems. To be concrete, we exemplify memory effects with the paradigmatic case of granular fluids, although extensions to other contexts such as molecular fluids with non-linear drag are also considered. The focus is put on two archetypal memory effects: the Kovacs and Mpemba effects. In brief, the first is related to imperfectly reaching a steady state -- either equilibrium or non-equilibrium, whereas the second is related to reaching a steady state faster despite starting further. Connections to optimal control theory thus naturally emerge and are briefly discussed
△ Less
Submitted 10 October, 2023; v1 submitted 24 July, 2023;
originally announced July 2023.
-
Optimal resetting strategies for search processes in heterogeneous environments
Authors:
Gregorio García-Valladares,
Carlos A. Plata,
Antonio Prados,
Alessandro Manacorda
Abstract:
In many physical situations, there appears the problem of reaching a single target that is spatially distributed. Here we analyse how stochastic resetting, also spatially distributed, can be used to improve the search process when the target location is quenched, i.e. it does not evolve in time. More specifically, we consider a model with minimal but sufficient ingredients that allows us to derive…
▽ More
In many physical situations, there appears the problem of reaching a single target that is spatially distributed. Here we analyse how stochastic resetting, also spatially distributed, can be used to improve the search process when the target location is quenched, i.e. it does not evolve in time. More specifically, we consider a model with minimal but sufficient ingredients that allows us to derive analytical results for the relevant physical quantities, such as the first passage time distribution. We focus on the minimisation of the mean first passage time and its fluctuations (standard deviation), which proves to be non-trivial. Our analysis shows that the no-disorder case is singular: for small disorder, the resetting rate distribution that minimises the mean first passage time leads to diverging fluctuations -- which impinge on the practicality of this minimisation. Interestingly, this issue is healed by minimising the fluctuations: the associated resetting rate distribution gives first passage times that are very close to the optimal ones.
△ Less
Submitted 21 November, 2023; v1 submitted 23 May, 2023;
originally announced May 2023.
-
Work fluctuations for diffusion dynamics submitted to stochastic return
Authors:
Deepak Gupta,
Carlos A. Plata
Abstract:
Returning a system to a desired state under a force field involves a thermodynamic cost, i.e., {\it work}. This cost fluctuates for a small-scale system from one experimental realization to another. We introduce a general framework to determine the work distribution for returning a system facilitated by a confining potential with its minimum at the restart location. The general strategy, based on…
▽ More
Returning a system to a desired state under a force field involves a thermodynamic cost, i.e., {\it work}. This cost fluctuates for a small-scale system from one experimental realization to another. We introduce a general framework to determine the work distribution for returning a system facilitated by a confining potential with its minimum at the restart location. The general strategy, based on average over {\it resetting pathways}, constitutes a robust method to gain access to the statistical information of observables from resetting systems. We exploit paradigmatic setups, where explicit computations are attainable, to illustrate the theory. Numerical simulations validate our theoretical predictions. For some of these examples, a non-trivial behavior of the work fluctuations opens a door to optimization problems. Specifically, work fluctuations can be minimized by an appropriate tuning of the return rate.
△ Less
Submitted 15 June, 2022;
originally announced June 2022.
-
Buckling in a rotationally invariant spin-elastic model
Authors:
G. García-Valladares,
C. A. Plata,
A. Prados
Abstract:
Scanning tunneling microscopy experiments have revealed an spontaneous rippled-to-buckled transition in heated graphene sheets, in absence of any mechanical load. Several models relying on a simplified picture of the interaction between elastic and internal, electronic, degrees of freedom have been proposed to understand this phenomenon. Nevertheless, these models are not fully consistent with the…
▽ More
Scanning tunneling microscopy experiments have revealed an spontaneous rippled-to-buckled transition in heated graphene sheets, in absence of any mechanical load. Several models relying on a simplified picture of the interaction between elastic and internal, electronic, degrees of freedom have been proposed to understand this phenomenon. Nevertheless, these models are not fully consistent with the classical theory of elasticity, since they do not preserve rotational invariance. Herein, we develop and analyse an alternative classical spin-elastic model that preserves rotational invariance while giving a qualitative account of the rippled-to-buckled transition. By integrating over the internal degrees of freedom, an effective free energy for the elastic modes is derived, which only depends on the curvature. Minimisation of this free energy gives rise to the emergence of different mechanical phases, whose thermodynamic stability is thoroughly analysed, both analytically and numerically. All phases are characterised by a spatially homogeneous curvature, which plays the role of the order parameter for the rippled-to-buckled transition, in both the one- and two-dimensional cases. In the latter, our focus is put on the honeycomb lattice, which is representative of actual graphene.
△ Less
Submitted 30 January, 2023; v1 submitted 1 June, 2022;
originally announced June 2022.
-
Thermal brachistochrone for harmonically confined Brownian particles
Authors:
Antonio Patrón,
Antonio Prados,
Carlos A. Plata
Abstract:
The overdamped Brownian dynamics of a harmonic oscillator is a paradigmatic system in non-equilibrium statistical mechanics, which reliably models relevant stochastic systems such as colloidal particles submitted to optical confinement. In this work, optimal thermal protocols are tailored to minimise the connection time between equilibrium states of overdamped $d$-dimensional oscillators. Applicat…
▽ More
The overdamped Brownian dynamics of a harmonic oscillator is a paradigmatic system in non-equilibrium statistical mechanics, which reliably models relevant stochastic systems such as colloidal particles submitted to optical confinement. In this work, optimal thermal protocols are tailored to minimise the connection time between equilibrium states of overdamped $d$-dimensional oscillators. Application of control theory reveals that these optimal protocols are of bang-bang type, that is, the temperature of the bath has to take alternatively the minimum and maximum values allowed. Minimum connection times increase with the considered dimension $d$. Remarkably, this is the case even for symmetric oscillators, for example, with spherical symmetry -- in which the degeneracy of the elastic constant along the $d$ possible directions seems to imply a minimum connection time equal to that for the one-dimensional case. This surprising unavoidable price to pay when increasing dimension is thoroughly investigated and understood on a physical basis. Moreover, information theory tools such as the thermodynamic length and its divergence are analysed over the brachistochrone.
△ Less
Submitted 31 August, 2022; v1 submitted 3 May, 2022;
originally announced May 2022.
-
Driving rapidly while remaining in control: classical shortcuts from Hamiltonian to stochastic dynamics
Authors:
David Guéry-Odelin,
Christopher Jarzynski,
Carlos A. Plata,
Antonio Prados,
Emmanuel Trizac
Abstract:
Stochastic thermodynamics lays down a broad framework to revisit the venerable concepts of heat, work and entropy production for individual stochastic trajectories of mesoscopic systems. Remarkably, this approach, relying on stochastic equations of motion, introduces time into the description of thermodynamic processes -- which opens the way to fine control them. As a result, the field of finite-t…
▽ More
Stochastic thermodynamics lays down a broad framework to revisit the venerable concepts of heat, work and entropy production for individual stochastic trajectories of mesoscopic systems. Remarkably, this approach, relying on stochastic equations of motion, introduces time into the description of thermodynamic processes -- which opens the way to fine control them. As a result, the field of finite-time thermodynamics of mesoscopic systems has blossomed. In this article, after introducing a few concepts of control for isolated mechanical systems evolving according to deterministic equations of motion, we review the different strategies that have been developed to realize finite-time state-to-state transformations in both over and underdamped regimes, by the proper design of time-dependent control parameters/driving. The systems under study are stochastic, epitomized by a Brownian object immersed in a fluid; they are thus strongly coupled to their environment playing the role of a reservoir. Interestingly, a few of those methods (inverse engineering, counterdiabatic driving, fast-forward) are directly inspired by their counterpart in quantum control. The review also analyzes the control through reservoir engineering. Besides the reachability of a given target state from a known initial state, the question of the optimal path is discussed. Optimality is here defined with respect to a cost function, a subject intimately related to the field of information thermodynamics and the question of speed limit. Another natural extension discussed deals with the connection between arbitrary states or non-equilibrium steady states. This field of control in stochastic thermodynamics enjoys a wealth of applications, ranging from optimal mesoscopic heat engines to population control in biological systems.
△ Less
Submitted 15 December, 2022; v1 submitted 23 April, 2022;
originally announced April 2022.
-
Taming the time evolution in overdamped systems: shortcuts elaborated from fast-forward and time-reversed protocols
Authors:
Carlos A. Plata,
Antonio Prados,
Emmanuel Trizac,
David Guéry-Odelin
Abstract:
Using a reverse-engineering approach on the time-distorted solution in a reference potential, we work out the external driving potential to be applied to a Brownian system in order to slow or accelerate the dynamics, or even to invert the arrow of time. By welding a direct and time-reversed evolution towards a well chosen common intermediate state, we derive analytically a smooth protocol to conne…
▽ More
Using a reverse-engineering approach on the time-distorted solution in a reference potential, we work out the external driving potential to be applied to a Brownian system in order to slow or accelerate the dynamics, or even to invert the arrow of time. By welding a direct and time-reversed evolution towards a well chosen common intermediate state, we derive analytically a smooth protocol to connect two \emph{arbitrary} states in an arbitrarily short amount of time. Not only does the reverse-engineering approach proposed in this Letter contain the current -- rather limited -- catalogue of explicit protocols but it also provides a systematic strategy to build the connection between arbitrary states with a physically admissible driving. Optimization and further generalizations are also discussed.
△ Less
Submitted 7 October, 2021;
originally announced October 2021.
-
Asymmetric Stochastic Resetting: Modeling Catastrophic Events
Authors:
Carlos A. Plata,
Deepak Gupta,
Sandro Azaele
Abstract:
In the classical stochastic resetting problem, a particle, moving according to some stochastic dynamics, undergoes random interruptions that bring it to a selected domain, and then, the process recommences. Hitherto, the resetting mechanism has been introduced as a symmetric reset about the preferred location. However, in nature, there are several instances where a system can only reset from certa…
▽ More
In the classical stochastic resetting problem, a particle, moving according to some stochastic dynamics, undergoes random interruptions that bring it to a selected domain, and then, the process recommences. Hitherto, the resetting mechanism has been introduced as a symmetric reset about the preferred location. However, in nature, there are several instances where a system can only reset from certain directions, e.g., catastrophic events. Motivated by this, we consider a continuous stochastic process on the positive real line. The process is interrupted at random times occurring at a constant rate, and then, the former relocates to a value only if the current one exceeds a threshold; otherwise, it follows the trajectory defined by the underlying process without resetting. We present a general framework to obtain the exact non-equilibrium steady state of the system and the mean first passage time for the system to reach the origin. Employing this framework, we obtain the explicit solutions for two different model systems. Some of the classical results found in symmetric resetting such as the existence of an optimal resetting, are strongly modified. Finally, numerical simulations have been performed to verify the analytical findings, showing an excellent agreement.
△ Less
Submitted 7 December, 2020; v1 submitted 24 July, 2020;
originally announced July 2020.
-
Building an irreversible Carnot-like heat engine with an overdamped harmonic oscillator
Authors:
Carlos A. Plata,
David Guéry-Odelin,
Emmanuel Trizac,
Antonio Prados
Abstract:
We analyse non-equilibrium Carnot-like cycles built with a colloidal particle in a harmonic trap, which is immersed in a fluid that acts as a heat bath. Our analysis is carried out in the overdamped regime. The cycle comprises four branches: two isothermal processes and two \textit{locally} adiabatic ones. In the latter, both the temperature of the bath and the stiffness of the harmonic trap vary…
▽ More
We analyse non-equilibrium Carnot-like cycles built with a colloidal particle in a harmonic trap, which is immersed in a fluid that acts as a heat bath. Our analysis is carried out in the overdamped regime. The cycle comprises four branches: two isothermal processes and two \textit{locally} adiabatic ones. In the latter, both the temperature of the bath and the stiffness of the harmonic trap vary in time, but in such a way that the average heat vanishes for all times. All branches are swept at a finite rate and, therefore, the corresponding processes are irreversible, not quasi-static. Specifically, we are interested in optimising the heat engine to deliver the maximum power and characterising the corresponding values of the physical parameters. The efficiency at maximum power is shown to be very close to the Curzon-Ahlborn bound over the whole range of the ratio of temperatures of the two thermal baths, pointing to the near optimality of the proposed protocol.
△ Less
Submitted 16 June, 2020;
originally announced June 2020.
-
Stochastic resetting with stochastic returns using external trap
Authors:
Deepak Gupta,
Carlos A Plata,
Anupam Kundu,
Arnab Pal
Abstract:
In the past few years, stochastic resetting has become a subject of immense interest. Most of the theoretical studies so far focused on instantaneous resetting which is, however, a major impediment to practical realization or experimental verification in the field. This is because in the real world, taking a particle from one place to another requires finite time and thus a generalization of the e…
▽ More
In the past few years, stochastic resetting has become a subject of immense interest. Most of the theoretical studies so far focused on instantaneous resetting which is, however, a major impediment to practical realization or experimental verification in the field. This is because in the real world, taking a particle from one place to another requires finite time and thus a generalization of the existing theory to incorporate non-instantaneous resetting is very much in need. In this paper, we propose a method of resetting which involves non-instantaneous returns facilitated by an external confining trap potential $U(x)$ centered at the resetting location. We consider a Brownian particle that starts its random motion from the origin. Upon resetting, the trap is switched on and the particle starts experiencing a force towards the center of the trap which drives it to return to the origin. The return phase ends when the particle makes a first passage to this center. We develop a general framework to study such a set up. Importantly, we observe that the system reaches a non-equilibrium steady state which we analyze in full details for two choices of $U(x)$, namely, (i) linear and (ii) harmonic. Finally, we perform numerical simulations and find an excellent agreement with the theory. The general formalism developed here can be applied to more realistic return protocols opening up a panorama of possibilities for further theoretical and experimental applications.
△ Less
Submitted 13 April, 2021; v1 submitted 24 April, 2020;
originally announced April 2020.
-
Work fluctuations and Jarzynski equality in stochastic resetting
Authors:
Deepak Gupta,
Carlos A. Plata,
Arnab Pal
Abstract:
We consider the paradigm of an overdamped Brownian particle in a potential well, which is modulated through an external protocol, in the presence of stochastic resetting. Thus, in addition to the short range diffusive motion, the particle also experiences intermittent long jumps which reset the particle back at a preferred location. Due to the modulation of the trap, work is done on the system and…
▽ More
We consider the paradigm of an overdamped Brownian particle in a potential well, which is modulated through an external protocol, in the presence of stochastic resetting. Thus, in addition to the short range diffusive motion, the particle also experiences intermittent long jumps which reset the particle back at a preferred location. Due to the modulation of the trap, work is done on the system and we investigate the statistical properties of the work fluctuations. We find that the distribution function of the work typically, in asymptotic times, converges to a universal Gaussian form for any protocol as long as that is also renewed after each resetting event. When observed for a finite time, we show that the system does not generically obey the Jarzynski equality which connects the finite time work fluctuations to the difference in free energy, albeit a restricted set of protocols which we identify herein. In stark contrast, the Jarzynski equality is always fulfilled when the protocols continue to evolve without being reset. We present a set of exactly solvable models, demonstrate the validation of our theory and carry out numerical simulations to illustrate these findings. Finally, we have pointed out possible realistic implementations for resetting in experiments using the so-called engineered swift equilibration.
△ Less
Submitted 2 February, 2020; v1 submitted 18 September, 2019;
originally announced September 2019.
-
Finite-time adiabatic processes: derivation and speed limit
Authors:
C. A. Plata,
D. Guéry-Odelin,
E. Trizac,
A. Prados
Abstract:
Obtaining adiabatic processes that connect equilibrium states in a given time represents a challenge for mesoscopic systems. In this paper, we explicitly show how to build these finite-time adiabatic processes for an overdamped Brownian particle in an arbitrary potential, a system that is relevant both at the conceptual and the practical level. This is achieved by jointly engineering the time evol…
▽ More
Obtaining adiabatic processes that connect equilibrium states in a given time represents a challenge for mesoscopic systems. In this paper, we explicitly show how to build these finite-time adiabatic processes for an overdamped Brownian particle in an arbitrary potential, a system that is relevant both at the conceptual and the practical level. This is achieved by jointly engineering the time evolutions of the binding potential and the fluid temperature. Moreover, we prove that the second principle imposes a speed limit for such adiabatic transformations: there appears a minimum time to connect the initial and final states. This minimum time can be explicitly calculated for a general compression/decompression situation.
△ Less
Submitted 8 March, 2020; v1 submitted 6 May, 2019;
originally announced May 2019.
-
From proteins to grains: a journey through simple models
Authors:
Carlos A. Plata
Abstract:
This thesis is about the study of complex systems through simple models. Our work evidences the relevance of this kind of modeling in science, which provides us with a better understanding of nature at minimum cost. The fundamentals tools for our investigation are those of (nonequilibrium) statistical mechanics.
More specifically, we thoroughly analyze two minimalistic models, which are motivate…
▽ More
This thesis is about the study of complex systems through simple models. Our work evidences the relevance of this kind of modeling in science, which provides us with a better understanding of nature at minimum cost. The fundamentals tools for our investigation are those of (nonequilibrium) statistical mechanics.
More specifically, we thoroughly analyze two minimalistic models, which are motivated by two quite different realms: modular biomolecules and granular fluids. On the one hand, we look into the elastic response of modular biomolecules. Therein, our main goal is predicting of the unfolding pathway of the molecule. We put forward and check a theoretical framework that is valid in the maximum hysteresis path limit. On the other hand, a model mimicking the shear modes of granular gases is analyzed in depth. Our study embraces a wide range of fundamental aspects, among others: physical stationary states, fluctuations, finite size effects, stability of the stationary solutions, and memory effects. This analysis is carried out by a combination of numerical and analytical techniques, with the numerical results showing, in general, an excellent agreement with the theory.
△ Less
Submitted 8 April, 2019; v1 submitted 7 February, 2019;
originally announced February 2019.
-
Optimal work in a harmonic trap with bounded stiffness
Authors:
Carlos A. Plata,
David Guéry-Odelin,
E. Trizac,
A. Prados
Abstract:
We apply Pontryagin's principle to drive rapidly a trapped overdamped Brownian particle in contact with a thermal bath between two equilibrium states corresponding to different trap stiffness $κ$. We work out the optimal time dependence $κ(t)$ by minimising the work performed on the particle under the non-holonomic constraint $0\leqκ\leqκ_{\max}$, an experimentally relevant situation. Several impo…
▽ More
We apply Pontryagin's principle to drive rapidly a trapped overdamped Brownian particle in contact with a thermal bath between two equilibrium states corresponding to different trap stiffness $κ$. We work out the optimal time dependence $κ(t)$ by minimising the work performed on the particle under the non-holonomic constraint $0\leqκ\leqκ_{\max}$, an experimentally relevant situation. Several important differences arise, as compared with the case of unbounded stiffness that has been analysed in the literature. First, two arbitrary equilibrium states may not always be connected. Second, depending on the operating time $t_{\text{f}}$ and the desired compression ratio $κ_{\text{f}}/κ_{\textı}$, different types of solutions emerge. Finally, the differences in the minimum value of the work brought about by the bounds may become quite large, which may have a relevant impact on the optimisation of heat engines.
△ Less
Submitted 22 December, 2018;
originally announced December 2018.
-
Kovacs-like memory effect in athermal systems: linear response analysis
Authors:
Carlos A. Plata,
Antonio Prados
Abstract:
We analyse the emergence of Kovacs-like memory effects in athermal systems within the linear response regime. This is done by starting from both the master equation for the probability distribution and the equations for the physically relevant moments. The general results are applied to a general class of models with conserved momentum and non-conserved energy. Our theoretical predictions, obtaine…
▽ More
We analyse the emergence of Kovacs-like memory effects in athermal systems within the linear response regime. This is done by starting from both the master equation for the probability distribution and the equations for the physically relevant moments. The general results are applied to a general class of models with conserved momentum and non-conserved energy. Our theoretical predictions, obtained within the first Sonine approximation, show an excellent agreement with the numerical results.
△ Less
Submitted 19 September, 2017;
originally announced September 2017.
-
Relevance of the speed and direction of pulling in simple modular proteins
Authors:
Carlos A. Plata,
Zackary N. Scholl,
Piotr E. Marszalek,
A. Prados
Abstract:
A theoretical analysis of the unfolding pathway of simple modular proteins in length- controlled pulling experiments is put forward. Within this framework, we predict the first module to unfold in a chain of identical units, emphasizing the ranges of pulling speeds in which we expect our theory to hold. These theoretical predictions are checked by means of steered molecular dynamics of a simple co…
▽ More
A theoretical analysis of the unfolding pathway of simple modular proteins in length- controlled pulling experiments is put forward. Within this framework, we predict the first module to unfold in a chain of identical units, emphasizing the ranges of pulling speeds in which we expect our theory to hold. These theoretical predictions are checked by means of steered molecular dynamics of a simple construct, specifically a chain composed of two coiled-coils motives, where anisotropic features are revealed. These simulations also allow us to give an estimate for the range of pulling velocities in which our theoretical approach is valid.
△ Less
Submitted 17 May, 2018; v1 submitted 12 July, 2017;
originally announced July 2017.
-
Modelling the unfolding pathway of biomolecules: theoretical approach and experimental prospect
Authors:
Carlos A. Plata,
Antonio Prados
Abstract:
We analyse the unfolding pathway of biomolecules comprising several independent modules in pulling experiments. In a recently proposed model, a critical velocity $v_{c}$ has been predicted, such that for pulling speeds $v>v_{c}$ it is the module at the pulled end that opens first, whereas for $v<v_{c}$ it is the weakest. Here, we introduce a variant of the model that is closer to the experimental…
▽ More
We analyse the unfolding pathway of biomolecules comprising several independent modules in pulling experiments. In a recently proposed model, a critical velocity $v_{c}$ has been predicted, such that for pulling speeds $v>v_{c}$ it is the module at the pulled end that opens first, whereas for $v<v_{c}$ it is the weakest. Here, we introduce a variant of the model that is closer to the experimental setup, and discuss the robustness of the emergence of the critical velocity and of its dependence on the model parameters. We also propose a possible experiment to test the theoretical predictions of the model, which seems feasible with state-of-art molecular engineering techniques.
△ Less
Submitted 8 June, 2017;
originally announced June 2017.
-
Global stability and $H$-theorem in lattice models with non-conservative interactions
Authors:
C. A. Plata,
A. Prados
Abstract:
In kinetic theory, a system is usually described by its one-particle distribution function $f(\mathbf{r},\mathbf{v},t)$, such that $f(\mathbf{r},\mathbf{v},t)d\mathbf{r} d\mathbf{v}$ is the fraction of particles with positions and velocities in the intervals $(\mathbf{r}, \mathbf{r}+d\mathbf{r})$ and $(\mathbf{v}, \mathbf{v}+d\mathbf{v})$, respectively. Therein, global stability and the possible e…
▽ More
In kinetic theory, a system is usually described by its one-particle distribution function $f(\mathbf{r},\mathbf{v},t)$, such that $f(\mathbf{r},\mathbf{v},t)d\mathbf{r} d\mathbf{v}$ is the fraction of particles with positions and velocities in the intervals $(\mathbf{r}, \mathbf{r}+d\mathbf{r})$ and $(\mathbf{v}, \mathbf{v}+d\mathbf{v})$, respectively. Therein, global stability and the possible existence of an associated Lyapunov function or $H$-theorem are open problems when non-conservative interactions are present, as in granular fluids. Here, we address this issue in the framework of a lattice model for granular-like velocity fields. For a quite general driving mechanism, including both boundary and bulk driving, we show that the steady state reached by the system in the long time limit is globally stable. This is done by proving analytically that a certain $H$-functional is non-increasing in the long time limit. Moreover, for two specific energy injection mechanisms, we are able to demonstrate that the proposed $H$-functional is non-increasing for all times. Also, we put forward a proof that clearly illustrates why the "classical" Boltzmann functional $H_{B}[f]=\int\! d\mathbf{r} \, d\mathbf{v} f(\mathbf{r},\mathbf{v},t) \ln f(\mathbf{r},\mathbf{v},t)$ is inadequate for systems with non-conservative interactions. Not only is this done for the simplified kinetic description that holds in the lattice models analysed here but also for a general kinetic equation, like Boltzmann's or Enskog's.
△ Less
Submitted 24 April, 2017; v1 submitted 20 February, 2017;
originally announced February 2017.
-
Lattice models for granular-like velocity fields: Finite-size effects
Authors:
C. A. Plata,
A. Manacorda,
A. Lasanta,
A. Puglisi,
A. Prados
Abstract:
Long-range spatial correlations in the velocity and energy fields of a granular fluid are discussed in the framework of a 1d lattice model. The dynamics of the velocity field occurs through nearest-neighbour inelastic collisions that conserve momentum but dissipate energy. A set of equations for the fluctuating hydrodynamics of the velocity and energy mesoscopic fields give a first approximation f…
▽ More
Long-range spatial correlations in the velocity and energy fields of a granular fluid are discussed in the framework of a 1d lattice model. The dynamics of the velocity field occurs through nearest-neighbour inelastic collisions that conserve momentum but dissipate energy. A set of equations for the fluctuating hydrodynamics of the velocity and energy mesoscopic fields give a first approximation for (i) the velocity structure factor and (ii) the finite-size correction to the Haff law, both in the homogeneous cooling regime. At a more refined level, we have derived the equations for the two-site velocity correlations and the total energy fluctuations. First, we seek a perturbative solution thereof, in powers of the inverse of system size. On the one hand, when scaled with the granular temperature, the velocity correlations tend to a stationary value in the long time limit. On the other hand, the scaled standard deviation of the total energy diverges, that is, the system shows multiscaling. Second, we find an exact solution for the velocity correlations in terms of the spectrum of eigenvalues of a certain matrix. The results of numerical simulations of the microscopic model confirm our theoretical results, including the above described multiscaling phenomenon.
△ Less
Submitted 30 June, 2016; v1 submitted 29 June, 2016;
originally announced June 2016.
-
Lattice models for granular-like velocity fields: Hydrodynamic limit
Authors:
Alessandro Manacorda,
Carlos A. Plata,
Antonio Lasanta,
Andrea Puglisi,
Antonio Prados
Abstract:
A recently introduced model describing -on a 1d lattice- the velocity field of a granular fluid is discussed in detail. The dynamics of the velocity field occurs through next-neighbours inelastic collisions which conserve momentum but dissipate energy. The dynamics can be described by a stochastic equation in full phase space, or through the corresponding Master Equation for the time evolution of…
▽ More
A recently introduced model describing -on a 1d lattice- the velocity field of a granular fluid is discussed in detail. The dynamics of the velocity field occurs through next-neighbours inelastic collisions which conserve momentum but dissipate energy. The dynamics can be described by a stochastic equation in full phase space, or through the corresponding Master Equation for the time evolution of the probability distribution. In the hydrodynamic limit, equations for the average velocity and temperature fields with fluctuating currents are derived, which are analogous to those of granular fluids when restricted to the shear modes. Therefore, the homogeneous cooling state, with its linear instability, and other relevant regimes such as the uniform shear flow and the Couette flow states are described. The evolution in time and space of the single particle probability distribution, in all those regimes, is also discussed, showing that the local equilibrium is not valid in general. The noise for the momentum and energy currents, which are correlated, are white and Gaussian. The same is true for the noise of the energy sink, which is usually negligible.
△ Less
Submitted 7 January, 2016;
originally announced January 2016.
-
Understanding the dependence on the pulling speed of the unfolding pathway of proteins
Authors:
C. A. Plata,
F. Cecconi,
M. Chinappi,
A. Prados
Abstract:
The dependence of the unfolding pathway of proteins on the pulling speed is investigated. This is done by introducing a simple one-dimensional chain comprising $N$ units, with different characteristic bistable free energies. These units represent either each of the modules in a modular protein or each of the intermediate "unfoldons" in a protein domain, which can be either folded or unfolded. The…
▽ More
The dependence of the unfolding pathway of proteins on the pulling speed is investigated. This is done by introducing a simple one-dimensional chain comprising $N$ units, with different characteristic bistable free energies. These units represent either each of the modules in a modular protein or each of the intermediate "unfoldons" in a protein domain, which can be either folded or unfolded. The system is pulled by applying a force to the last unit of the chain, and the units unravel following a preferred sequence. We show that the unfolding sequence strongly depends on the pulling velocity $v_{p}$. In the simplest situation, there appears a critical pulling speed $v_{c}$: for pulling speeds $v_{p}<v_{c}$, the weakest unit unfolds first, whereas for $v_{p}>v_{c}$ it is the pulled unit that unfolds first. By means of a perturbative expansion, we find quite an accurate expression for this critical velocity.
△ Less
Submitted 6 July, 2015;
originally announced July 2015.
