-
Quantum Batteries: A Materials Science Perspective
Authors:
A. Camposeo,
T. Virgili,
F. Lombardi,
G. Cerullo,
D. Pisignano,
M. Polini
Abstract:
In the context of quantum thermodynamics, quantum batteries have emerged as promising devices for energy storage and manipulation. Over the past decade, substantial progress has been made in understanding the fundamental properties of quantum batteries, with several experimental implementations showing great promise. This Perspective provides an overview of the solid-state materials platforms that…
▽ More
In the context of quantum thermodynamics, quantum batteries have emerged as promising devices for energy storage and manipulation. Over the past decade, substantial progress has been made in understanding the fundamental properties of quantum batteries, with several experimental implementations showing great promise. This Perspective provides an overview of the solid-state materials platforms that could lead to fully operational quantum batteries. After briefly introducing the basic features of quantum batteries, we discuss organic microcavities, where superextensive charging has already been demonstrated experimentally. We then explore other materials, including inorganic nanostructures (such as quantum wells and dots), perovskite systems, and (normal and high-temperature) superconductors. Key achievements in these areas, relevant to the experimental realization of quantum batteries, are highlighted. We also address challenges and future research directions. Despite their enormous potential for energy storage devices, research into advanced materials for quantum batteries is still in its infancy. This paper aims to stimulate interdisciplinarity and convergence among different materials science research communities to accelerate the development of new materials and device architectures for quantum batteries.
△ Less
Submitted 5 March, 2025;
originally announced March 2025.
-
Light-Emitting Microfibers from Lotus Root for Eco-friendly Optical Waveguides and Biosensing
Authors:
X. Yang,
L. Xu,
S. Xiong,
H. Rao,
F. Tan,
J. Yan,
Y. Bao,
A. Albanese,
A. Camposeo,
D. Pisignano,
B. Li
Abstract:
Optical biosensors based on micro-/nano-fibers are highly valuable for probing and monitoring liquid environments and bioactivity. Most of current optical biosensors, however, are still based on glass, semiconductors, or metallic materials, which might be not fully suited for biologically-relevant environments. Here, we introduce biocompatible and flexible microfibers from Lotus silk as micro-envi…
▽ More
Optical biosensors based on micro-/nano-fibers are highly valuable for probing and monitoring liquid environments and bioactivity. Most of current optical biosensors, however, are still based on glass, semiconductors, or metallic materials, which might be not fully suited for biologically-relevant environments. Here, we introduce biocompatible and flexible microfibers from Lotus silk as micro-environmental monitors that exhibit waveguiding of intrinsic fluorescence as well as of coupled light. These features make single-filament monitors excellent building blocks for a variety of sensing functions, including pH-probing and detection of bacterial activity. These results pave the way for the development of new and entirely eco-friendly, potentially multiplexed biosensing platforms.
△ Less
Submitted 26 February, 2025;
originally announced February 2025.
-
Unusual Red Light Emission from Nonmetallic Cu$_2$Te Microdisk for Laser and SERS Applications
Authors:
Qiuguo Li,
Hao Rao,
Xinzhou Ma,
Haijuan Mei,
Zhengting Zhao,
Weiping Gong,
Andrea Camposeo,
Dario Pisignano,
Xianguang Yang
Abstract:
Physical characteristics of Cu$_2$Te are poorly investigated due to limited Te sources available and unclear atomic positions of crystal structure. Herein, hexagonal Cu$_2$Te microdisks are successfully prepared via chemical vapor deposition procedure using GaTe as Te source. The epitaxial growth mechanism of the Cu$_2$Te hexagonal structures with the orthorhombic phase are rationalized by propose…
▽ More
Physical characteristics of Cu$_2$Te are poorly investigated due to limited Te sources available and unclear atomic positions of crystal structure. Herein, hexagonal Cu$_2$Te microdisks are successfully prepared via chemical vapor deposition procedure using GaTe as Te source. The epitaxial growth mechanism of the Cu$_2$Te hexagonal structures with the orthorhombic phase are rationalized by proposed layer-over-layer growth model. The photoluminescence (PL) spectrum of Cu$_2$Te microdisks shows a new red emission band in addition to usual infrared light emission due to Cu deficiency. Single Cu$_2$Te microdisk operates as an optical microcavity supporting whispering gallery modes for red lasing around 627.5 nm. This Cu$_2$Te microdisk microcavity exhibits a high quality factor of 1568 and a low lasing threshold of 125 kW cm$^{-2}$ at room temperature. Meanwhile, Cu$_2$Te microdisks have been exhibited as an ideal platform for surface enhanced Raman scattering (SERS) eliminating drawbacks of noble metal substrates with detection limitation to nanomolar level and an enhancement factor of $\sim$1.95$\times$10$^5$. Hexagonal Cu$_2$Te microdisks turn out to be an efficient microcavity for red lasing and low-cost nonmetallic SERS substrates, opening potential applications in photonics and biological detection of aromatic molecules.
△ Less
Submitted 19 February, 2025;
originally announced February 2025.
-
Active Control of Polariton-Enabled Long-Range Energy Transfer
Authors:
A. Cargioli,
M. Lednev,
L. Lavista,
A. Camposeo,
A. Sassella,
D. Pisignano,
A. Tredicucci,
F. J. Garcia-Vidal,
J. Feist,
L. Persano
Abstract:
Optical control is achieved on the excited state energy transfer between spatially separated donor and acceptor molecules, both coupled to the same optical mode of a cavity. The energy transfer occurs through the formed hybrid polaritons and can be switched on and off by means of ultraviolet and visible light. The control mechanism relies on a photochromic component used as donor, whose absorption…
▽ More
Optical control is achieved on the excited state energy transfer between spatially separated donor and acceptor molecules, both coupled to the same optical mode of a cavity. The energy transfer occurs through the formed hybrid polaritons and can be switched on and off by means of ultraviolet and visible light. The control mechanism relies on a photochromic component used as donor, whose absorption and emission properties can be varied reversibly through light irradiation, whereas in-cavity hybridization with acceptors through polariton states enables a 6-fold enhancement of acceptor/donor contribution to the emission intensity with respect to a reference multilayer. These results pave the way for synthesizing effective gating systems for the transport of energy by light, relevant for light-harvesting and light-emitting devices, and for photovoltaic cells.
△ Less
Submitted 9 February, 2024; v1 submitted 6 October, 2023;
originally announced October 2023.
-
Erbium-doped WS$_2$ with Down- and Up-Conversion Photoluminescence Integrated on Silicon for Heterojunction Infrared Photodetection
Authors:
Qiuguo Li,
Hao Rao,
Haijuan Mei,
Zhengting Zhao,
Weiping Gong,
Andrea Camposeo,
Dario Pisignano,
Xianguang Yang
Abstract:
The integration of 2D nanomaterials with silicon is expected to enrich the applications of 2D functional nanomaterials and to pave the way for next-generation, nanoscale optoelectronics with enhanced performances. Herein, a strategy for rare earth element doping has been utilized for the synthesis of 2D WS$_2$:Er nanosheets to achieve up-conversion and down-conversion emission ranging from visible…
▽ More
The integration of 2D nanomaterials with silicon is expected to enrich the applications of 2D functional nanomaterials and to pave the way for next-generation, nanoscale optoelectronics with enhanced performances. Herein, a strategy for rare earth element doping has been utilized for the synthesis of 2D WS$_2$:Er nanosheets to achieve up-conversion and down-conversion emission ranging from visible to the near-infrared region. Moreover, the potential integration of the synthesized 2D nanosheets in silicon platforms is demonstrated by the realization of an infrared photodetector based on a WS$_2$:Er/Si heterojunction. These devices operate at room temperature and show a high photoresponsivity of ~39.8 mA/W (at 980 nm) and a detectivity of 2.79 $\times$ 10$^{10}$ cm Hz$^{1/2}$ W$^{-1}$. Moreover, the dark current and noise power density are suppressed effectively by van der Waals assisted p-n heterojunction. This work fundamentally contributes to establishing infrared detection by rare element doping of 2D materials in heterojunctions with Si, at the forefront of infrared 2D materials-based photonics.
△ Less
Submitted 8 September, 2023;
originally announced September 2023.
-
Tuneable optical gain and broadband lasing driven in electrospun polymer fibers by high dye concentration
Authors:
Giovanni Morello,
Maria Moffa,
Martina Montinaro,
Annachiara Albanese,
Karolis Kazlauskas,
Saulius Jursenas,
Ausra Tomkeviciene,
Juozas V. Grazulevicius,
Andrea Camposeo,
Dario Pisignano
Abstract:
The optical gain of blue light-emitting electrospun polystyrene fibers doped with a linear multi-fragment molecular dye based on the combination of fluorine-carbazole functional units is investigated, with the aim of correlating emission properties and the specific material architecture made of either aligned or disordered fibers. Enhanced performance is found in aligned fibers, whose gain spectru…
▽ More
The optical gain of blue light-emitting electrospun polystyrene fibers doped with a linear multi-fragment molecular dye based on the combination of fluorine-carbazole functional units is investigated, with the aim of correlating emission properties and the specific material architecture made of either aligned or disordered fibers. Enhanced performance is found in aligned fibers, whose gain spectrum can be finely tuned by varying the dye concentration. Instead, randomly oriented fibers show a manifold spectral line narrowing, resulting in sharp laser peaks superimposed on top of a broad emission band, ascribable to random lasing. In these systems, the increase of the dye content turns out to be effective for both decreasing the lasing threshold by about a factor 6 and for varying the laser emission wavelength. These results make these arrays and disordered architectures of fibers valuable active media for variable-gain, broadband lasing, which is remarkably important in optical sensing and tunable microlaser devices.
△ Less
Submitted 31 May, 2023;
originally announced May 2023.
-
Energy Dissipation and Asymmetric Excitation in Hybrid Waveguides for Routing and Coloring
Authors:
Xianguang Yang,
Long Wen,
Jiahao Yan,
Yanjun Bao,
Qin Chen,
Andrea Camposeo,
Dario Pisignano,
Baojun Li
Abstract:
The delivery of optical signals from an external light source to a nanoscale waveguide is highly important for the development of nanophotonic circuits. However, the efficient coupling of external light energy into nanophotonic components is difficult and still remains a challenge. Herein, we use an external silica nanofiber to light up an organic-inorganic hybrid nano-waveguide, namely a system c…
▽ More
The delivery of optical signals from an external light source to a nanoscale waveguide is highly important for the development of nanophotonic circuits. However, the efficient coupling of external light energy into nanophotonic components is difficult and still remains a challenge. Herein, we use an external silica nanofiber to light up an organic-inorganic hybrid nano-waveguide, namely a system composed of a polymer filament doped with MoS$_{2}$ quantum dots. Nanofiber-excited nano-waveguides in a crossed geometry are found to asymmetrically couple excitation signals along two opposite directions, with different energy dissipation resulting in different colors of the light emitted by MoS$_{2}$ quantum dots and collected from the waveguide terminals. Interestingly, rainbow-like light in the hybrid waveguide is achieved by three-in-one mixing of red, green, and blue components. This hetero-dimensional system of dots-in-waveguide represents a significant advance towards all-optical routing and full-color display in integrated nanophotonic devices.
△ Less
Submitted 24 September, 2022;
originally announced September 2022.
-
Impact of size effects on photopolymerization and its optical monitoring in-situ
Authors:
Andrea Camposeo,
Aristein Arkadii,
Luigi Romano,
Francesca D'Elia,
Filippo Fabbri,
Eyal Zussman,
Dario Pisignano
Abstract:
Photopolymerization processes are exploited in light exposure-based 3D printing technologies, where either a focused laser beam or a patterned light sheet allows layers of a UV curable, liquid pre-polymer to be solidified. Here we focus on the crucial, though often neglected, role of the layer thickness on photopolymerization. The temporal evolution of polymerization reactions occurring in droplet…
▽ More
Photopolymerization processes are exploited in light exposure-based 3D printing technologies, where either a focused laser beam or a patterned light sheet allows layers of a UV curable, liquid pre-polymer to be solidified. Here we focus on the crucial, though often neglected, role of the layer thickness on photopolymerization. The temporal evolution of polymerization reactions occurring in droplets of acrylate-based oligomers and in photoresist films with varied thickness is investigated by means of an optical system, which is specifically designed for in-situ and real-time monitoring. The time needed for complete curing is found to increase as the polymerization volume is decreased below a characteristic threshold that depends on the specific reaction pathway. This behavior is rationalized by modelling the process through a size-dependent polymerization rate. Our study highlights that the formation of photopolymerized networks might be affected by the involved volumes regardless of the specific curing mechanisms, which could play a crucial role in optimizing photocuring-based additive manufacturing.
△ Less
Submitted 5 September, 2022;
originally announced September 2022.
-
Cryptographic Strain-Dependent Light Pattern Generators
Authors:
Francesca D'Elia,
Francesco Pisani,
Alessandro Tredicucci,
Dario Pisignano,
Andrea Camposeo
Abstract:
Refractive freeform components are becoming increasingly relevant for generating controlled patterns of light, because of their capability to spatially-modulate optical signals with high efficiency and low background. However, the use of these devices is still limited by difficulties in manufacturing macroscopic elements with complex, 3-dimensional (3D) surface reliefs. Here, 3D-printed and stretc…
▽ More
Refractive freeform components are becoming increasingly relevant for generating controlled patterns of light, because of their capability to spatially-modulate optical signals with high efficiency and low background. However, the use of these devices is still limited by difficulties in manufacturing macroscopic elements with complex, 3-dimensional (3D) surface reliefs. Here, 3D-printed and stretchable magic windows generating light patterns by refraction are introduced. The shape and, consequently, the light texture achieved can be changed through controlled device strain. Cryptographic magic windows are demonstrated through exemplary light patterns, including micro-QR-codes, that are correctly projected and recognized upon strain gating while remaining cryptic for as-produced devices. The light pattern of micro-QR-codes can also be projected by two coupled magic windows, with one of them acting as the decryption key. Such novel, freeform elements with 3D shape and tailored functionalities is relevant for applications in illumination design, smart labels, anti-counterfeiting systems, and cryptographic communication.
△ Less
Submitted 15 April, 2022;
originally announced April 2022.
-
Heterogeneous Random Laser with Switching Activity Visualized by Replica Symmetry Breaking Maps
Authors:
Loredana M. Massaro,
Silvia Gentilini,
Alberto Portone,
Andrea Camposeo,
Dario Pisignano,
Claudio Conti,
Neda Ghofraniha
Abstract:
In the past decade, complex networks of light emitters are proposed as novel platforms for photonic circuits and lab-on-chip active devices. Lasing networks made by connected multiple gain components and graphs of nanoscale random lasers (RLs) obtained from complex meshes of polymeric nanofibers are successful prototypes. However, in the reported research, mainly collective emission from a whole n…
▽ More
In the past decade, complex networks of light emitters are proposed as novel platforms for photonic circuits and lab-on-chip active devices. Lasing networks made by connected multiple gain components and graphs of nanoscale random lasers (RLs) obtained from complex meshes of polymeric nanofibers are successful prototypes. However, in the reported research, mainly collective emission from a whole network of resonators is investigated, and only in a few cases, the emission from single points showing, although homogeneous and broad, spatial emission. In all cases, simultaneous activation of the miniaturized lasers is observed. Here, differently, we realize heterogeneous random lasers made of ribbon-like and highly porous fibers with evident RL action from separated micrometric domains that alternatively switch on and off by tuning the pumping light intensity. We visualize this novel effect by building for the first time replica symmetry breaking (RSB) maps of the emitting fibers with 2 μm spatial resolution. In addition, we calculate the spatial correlations of the laser regions showing clearly an average extension of 50 μm. The observed blinking effect is due to mode interaction along light guiding fibers and opens new avenues in the fabrication of flexible photonic networks with specific and adaptable activity.
△ Less
Submitted 28 March, 2022;
originally announced March 2022.
-
Materials and devices for fundamental quantum science and quantum technologies
Authors:
Marco Polini,
Francesco Giazotto,
Kin Chung Fong,
Ioan M. Pop,
Carsten Schuck,
Tommaso Boccali,
Giovanni Signorelli,
Massimo D'Elia,
Robert H. Hadfield,
Vittorio Giovannetti,
Davide Rossini,
Alessandro Tredicucci,
Dmitri K. Efetov,
Frank H. L. Koppens,
Pablo Jarillo-Herrero,
Anna Grassellino,
Dario Pisignano
Abstract:
Technologies operating on the basis of quantum mechanical laws and resources such as phase coherence and entanglement are expected to revolutionize our future. Quantum technologies are often divided into four main pillars: computing, simulation, communication, and sensing & metrology. Moreover, a great deal of interest is currently also nucleating around energy-related quantum technologies. In thi…
▽ More
Technologies operating on the basis of quantum mechanical laws and resources such as phase coherence and entanglement are expected to revolutionize our future. Quantum technologies are often divided into four main pillars: computing, simulation, communication, and sensing & metrology. Moreover, a great deal of interest is currently also nucleating around energy-related quantum technologies. In this Perspective, we focus on advanced superconducting materials, van der Waals materials, and moiré quantum matter, summarizing recent exciting developments and highlighting a wealth of potential applications, ranging from high-energy experimental and theoretical physics to quantum materials science and energy storage.
△ Less
Submitted 23 January, 2022;
originally announced January 2022.
-
Unexpected Electron Transport Suppression in a Heterostructures Graphene MoS2 Multiple Field-Effect Transistor Architecture
Authors:
Gaia Ciampalini,
Filippo Fabbri,
Guido Menichetti,
Luca Buoni,
Simona Pace,
Vaidotas Mišeikis,
Alessandro Pitanti,
Dario Pisignano,
Camilla Coletti,
Alessandro Tredicucci,
Stefano Roddaro
Abstract:
We demonstrate a graphene-MoS2 architecture integrating multiple field-effect transistors and we independently probe and correlate the conducting properties of van der Waals coupled graphene-MoS2 contacts with the ones of the MoS2 channels. Devices are fabricated starting from high-quality single-crystal monolayers grown by chemical vapor deposition and characterized by scanning Raman and photolum…
▽ More
We demonstrate a graphene-MoS2 architecture integrating multiple field-effect transistors and we independently probe and correlate the conducting properties of van der Waals coupled graphene-MoS2 contacts with the ones of the MoS2 channels. Devices are fabricated starting from high-quality single-crystal monolayers grown by chemical vapor deposition and characterized by scanning Raman and photoluminescence spectroscopies. Transconductance curves of MoS2 are compared with the current-voltage characteristics of graphene contact stripes, revealing a significant suppression of transport on the n-side of the transconductance curve. Based on ab-initio modeling, the effect is understood in terms of trapping by sulfur vacancies, which counter-intuitively depends on the field-effect, even though the graphene contact layer is positioned between the backgate and the MoS2 channel.
△ Less
Submitted 19 January, 2022; v1 submitted 4 August, 2021;
originally announced August 2021.
-
Naturally-Degradable Photonic Devices with Transient Function by Heterostructured Waxy-Sublimating and Water-Soluble Materials
Authors:
Andrea Camposeo,
Francesca D'Elia,
Alberto Portone,
Francesca Matino,
Matteo Archimi,
Silvia Conti,
Gianluca Fiori,
Dario Pisignano,
Luana Persano
Abstract:
Combined dry-wet transient materials and devices are introduced, which are based on water-dissolvable dye-doped polymers layered onto non-polar cyclic hydrocarbon sublimating substrates. Light-emitting heterostructures showing amplified spontaneous emission are used as illumination sources for speckle-free, full-field imaging, and transient optical labels are realized that incorporate QR codes wit…
▽ More
Combined dry-wet transient materials and devices are introduced, which are based on water-dissolvable dye-doped polymers layered onto non-polar cyclic hydrocarbon sublimating substrates. Light-emitting heterostructures showing amplified spontaneous emission are used as illumination sources for speckle-free, full-field imaging, and transient optical labels are realized that incorporate QR codes with stably encoded information. The transient behavior is also studied at the microscopic scale, highlighting the real time evolution of material domains in the sublimating compound. Finally, the exhausted components are fully soluble in water thus being naturally degradable.
△ Less
Submitted 8 December, 2020;
originally announced December 2020.
-
Dye stabilization and wavelength tunability in lasing fibers based on DNA
Authors:
Luana Persano,
Adam Szukalski,
Michele Gaio,
Maria Moffa,
Giacomo Salvadori,
Lech Sznitko,
Andrea Camposeo,
Jaroslaw Mysliwiec,
Riccardo Sapienza,
Benedetta Mennucci,
Dario Pisignano
Abstract:
Lasers based on biological materials are attracting an increasing interest in view of their use in integrated and transient photonics. DNA as optical biopolymer in combination with highly-emissive dyes has been reported to have excellent potential in this respect, however achieving miniaturized lasing systems based on solid-state DNA shaped in different geometries to confine and enhance emission i…
▽ More
Lasers based on biological materials are attracting an increasing interest in view of their use in integrated and transient photonics. DNA as optical biopolymer in combination with highly-emissive dyes has been reported to have excellent potential in this respect, however achieving miniaturized lasing systems based on solid-state DNA shaped in different geometries to confine and enhance emission is still a challenge, and physico-chemical mechanisms originating fluorescence enhancement are not fully understood. Herein, a class of wavelength-tunable lasers based on DNA nanofibers is demonstrated, for which optical properties are highly controlled through the system morphology. A synergistic effect is highlighted at the basis of lasing action. Through a quantum chemical investigation, we show that the interaction of DNA with the encapsulated dye leads to hindered twisting and suppressed channels for the non-radiative decay. This is combined with effective waveguiding, optical gain, and tailored mode confinement to promote morphologically-controlled lasing in DNA-based nanofibers. The results establish design rules for the development of bright and tunable nanolasers and optical networks based on DNA nanostructures.
△ Less
Submitted 5 December, 2020;
originally announced December 2020.
-
Synthesis, crystal structure, polymorphism and microscopic luminescence properties of anthracene derivative compounds
Authors:
Anna Moliterni,
Davide Altamura,
Rocco Lassandro,
Vincent Olieric,
Gianmarco Ferri,
Francesco Cardarelli,
Andrea Camposeo,
Dario Pisignano,
John E. Anthony,
Cinzia Giannini
Abstract:
Anthracene derivative compounds are currently investigated because of their unique physical properties (e.g., bright luminescence and emission tunability), which make them ideal candidates for advanced optoelectronic devices. Intermolecular interactions are the basis of the tunability of the optical and electronic properties of these compounds, whose prediction and exploitation benefit from the kn…
▽ More
Anthracene derivative compounds are currently investigated because of their unique physical properties (e.g., bright luminescence and emission tunability), which make them ideal candidates for advanced optoelectronic devices. Intermolecular interactions are the basis of the tunability of the optical and electronic properties of these compounds, whose prediction and exploitation benefit from the knowledge of the crystal structure and the packing architecture. Polymorphism can occur due to the weak intermolecular interactions, asking for detailed structural analysis clarifying the origin of observed material property modifications. Here, two silylethyne-substituted anthracene compounds are characterized by single-crystal synchrotron X-ray diffraction, identifying a new polymorph. Additionally, laser confocal microscopy and fluorescence lifetime imaging microscopy confirm the results obtained by the X-ray diffraction characterization, i.e., shifting the substituents towards the external benzene rings of the anthracene unit favours π-π interactions, impacting on both the morphology and the microscopic optical properties of the crystals. The compounds with more isolated anthracene units feature shorter lifetime and emission spectra more similar to those ones of isolated molecules. The crystallographic study, supported by the optical investigation, sheds light on the influence of non-covalent interactions on the crystal packing and luminescence properties of anthracene derivatives, providing a further step towards their efficient use as building blocks in active components of light sources and photonic networks.
△ Less
Submitted 5 December, 2020;
originally announced December 2020.
-
Non-local cooperative atomic motions that govern dissipation in amorphous tantala unveiled by dynamical mechanical spectroscopy
Authors:
Francesco Puosi,
Francesco Fidecaro,
Simone Capaccioli,
Dario Pisignano,
Dino Leporini
Abstract:
The mechanisms governing mechanical dissipation in amorphous tantala are studied at microscopic scale via Molecular Dynamics simulations, namely by mechanical spectroscopy in a wide range of temperature and frequency. We find that dissipation is associated with irreversible atomic rearrangements with a sharp cooperative character, involving tens to hundreds of atoms arranged in spatially extended…
▽ More
The mechanisms governing mechanical dissipation in amorphous tantala are studied at microscopic scale via Molecular Dynamics simulations, namely by mechanical spectroscopy in a wide range of temperature and frequency. We find that dissipation is associated with irreversible atomic rearrangements with a sharp cooperative character, involving tens to hundreds of atoms arranged in spatially extended clusters of polyhedra. Remarkably, at low temperature we observe an excess of plastically rearranging oxygen atoms which correlates with the experimental peak in the macroscopic mechanical losses. A detailed structural analysis reveals preferential connections of the irreversibly rearranging polyhedra, corresponding to edge and face sharing. These results might lead to microscopically informed design rules for reducing mechanical losses in relevant materials for structural, optical, and sensing applications.
△ Less
Submitted 23 September, 2020;
originally announced September 2020.
-
Conformable nanowire-in-nanofiber hybrids for low-threshold optical gain in the ultraviolet
Authors:
Alberto Portone,
Rocio Borrego-Varillas,
Lucia Ganzer,
Riccardo Di Corato,
Antonio Qualtieri,
Luana Persano,
Andrea Camposeo,
Giulio Cerullo,
Dario Pisignano
Abstract:
The miniaturization of diagnostic devices that exploit optical detection schemes requires the design of light-sources combining small size, high performance for effective excitation of chromophores, and mechanical flexibility for easy coupling to components with complex and non-planar shapes. Here, ZnO nanowire-in-fiber hybrids with internal architectural order are introduced, exhibiting a combina…
▽ More
The miniaturization of diagnostic devices that exploit optical detection schemes requires the design of light-sources combining small size, high performance for effective excitation of chromophores, and mechanical flexibility for easy coupling to components with complex and non-planar shapes. Here, ZnO nanowire-in-fiber hybrids with internal architectural order are introduced, exhibiting a combination of polarized stimulated emission, low propagation losses of light modes, and structural flexibility. Ultrafast transient absorption experiments on the electrospun material show optical gain which gives rise to amplified spontaneous emission, with threshold lower than the value found in films. These systems are highly flexible and can conveniently conform to curved surfaces, which makes them appealing active elements for various device platforms, such as bendable lasers, optical networks and sensors, as well as for application in bioimaging, photo-crosslinking, and optogenetics.
△ Less
Submitted 27 June, 2020;
originally announced June 2020.
-
Printing Flowers? Custom-tailored Photonic Cellulose Films with Engineered Surface Topography
Authors:
Guang Chu,
Andrea Camposeo,
Rita Vilensky,
Gleb Vasilyev,
Patrick Martin,
Dario Pisignano,
Eyal Zussman
Abstract:
Wrought by nature's wondrous hand, surface topographies are discovered on all length scales in living creatures and serve a variety of functions. Inspired by floral striations, here we developed a scalable means of fabricating custom-tailored photonic cellulose films that contained both cholesteric organization and microscopic wrinkly surface topography. Free-standing films were prepared by moldin…
▽ More
Wrought by nature's wondrous hand, surface topographies are discovered on all length scales in living creatures and serve a variety of functions. Inspired by floral striations, here we developed a scalable means of fabricating custom-tailored photonic cellulose films that contained both cholesteric organization and microscopic wrinkly surface topography. Free-standing films were prepared by molding cellulose nanocrystal ink onto an oriented wrinkled template through evaporation-assisted nanoimprinting lithography, yielding morphology-induced light scattering at a short wavelength as well as optically tunable structural color derived from the helical cellulose matrix. As a result, the interplay between the two photonic structures, grating-like surface and chiral bulk, led to selective scattering of circularly polarized light with specific handedness. Moreover, the wrinkled surface relief on cholesteric cellulose films could be precisely controlled, enabling engineered printing of microscopic patterned images.
△ Less
Submitted 26 October, 2019;
originally announced October 2019.
-
Low-defectiveness exfoliation of MoS2 nanoparticles and their embedment in hybrid light-emitting polymer nanofibers
Authors:
Alberto Portone,
Luigi Romano,
Vito Fasano,
Riccardo Di Corato,
Andrea Camposeo,
Filippo Fabbri,
Francesco Cardarelli,
Dario Pisignano,
Luana Persano
Abstract:
Molybdenum disulfide (MoS2) has been attracting extraordinary attention for its intriguing optical, electronic and mechanical properties. Here we demonstrate hybrid, organic-inorganic light-emitting nanofibers based on MoS2 nanoparticle dopants obtained through a simple and inexpensive sonication process in N-methyl-2-pyrrolidone and successfully encapsulated in polymer filaments. Defectiveness is…
▽ More
Molybdenum disulfide (MoS2) has been attracting extraordinary attention for its intriguing optical, electronic and mechanical properties. Here we demonstrate hybrid, organic-inorganic light-emitting nanofibers based on MoS2 nanoparticle dopants obtained through a simple and inexpensive sonication process in N-methyl-2-pyrrolidone and successfully encapsulated in polymer filaments. Defectiveness is found to be kept low, and stoichiometry preserved, by the implemented, gentle exfoliation method that allows the MoS2 nanoparticles to be produced. So-achieved hybrid fibers are smooth, uniform, flawless, and exhibit bright and continuous light emission. Moreover, they show significant capability of waveguiding self-emitted light along their longitudinal axis. These findings suggest the use of emissive MoS2 fibers enabled by gentle exfoliation methods as novel and highly promising optical material for building sensing surfaces and as components of photonic circuits.
△ Less
Submitted 17 November, 2018;
originally announced November 2018.
-
3D printing of optical materials: an investigation of the microscopic properties
Authors:
L. Persano,
F. Cardarelli,
A. Arinstein,
S. Uttiya,
E. Zussman,
D. Pisignano,
A. Camposeo
Abstract:
3D printing technologies are currently enabling the fabrication of objects with complex architectures and tailored properties. In such framework, the production of 3D optical structures, which are typically based on optical transparent matrices, optionally doped with active molecular compounds and nanoparticles, is still limited by the poor uniformity of the printed structures. Both bulk inhomogen…
▽ More
3D printing technologies are currently enabling the fabrication of objects with complex architectures and tailored properties. In such framework, the production of 3D optical structures, which are typically based on optical transparent matrices, optionally doped with active molecular compounds and nanoparticles, is still limited by the poor uniformity of the printed structures. Both bulk inhomogeneities and surface roughness of the printed structures can negatively affect the propagation of light in 3D printed optical components. Here we investigate photopolymerization-based printing processes by laser confocal microscopy. The experimental method we developed allows the printing process to be investigated in-situ, with microscale spatial resolution, and in real-time. The modelling of the photo-polymerization kinetics allows the different polymerization regimes to be investigated and the influence of process variables to be rationalized. In addition, the origin of the factors limiting light propagation in printed materials are rationalized, with the aim of envisaging effective experimental strategies to improve optical properties of printed materials.
△ Less
Submitted 9 July, 2018;
originally announced July 2018.
-
Stacked electrospun polymer nanofiber heterostructures with tailored stimulated emission
Authors:
Lech Sznitko,
Luigi Romano,
Dominika Wawrzynczyk,
Konrad Cyprych,
Jaroslaw Mysliwiec,
Dario Pisignano
Abstract:
We present stacked organic lasing heterostructures made by different species of light-emitting electrospun fibers, each able to provide optical gain in a specific spectral region. A hierarchical architecture is obtained by conformable layers of fibers with disordered two-dimensional organization and three-dimensional compositional heterogeneity. Lasing polymer fibers are superimposed in layers, sh…
▽ More
We present stacked organic lasing heterostructures made by different species of light-emitting electrospun fibers, each able to provide optical gain in a specific spectral region. A hierarchical architecture is obtained by conformable layers of fibers with disordered two-dimensional organization and three-dimensional compositional heterogeneity. Lasing polymer fibers are superimposed in layers, showing asymmetric optical behavior from the two sides of the organic heterostructure, and tailored and bichromatic stimulated emission depending on the excitation direction. A marginal role of energy acceptor molecules in determining quenching of high-energy donor species is evidenced by luminescence decay time measurements. These findings show that non-woven stacks of light-emitting electrospun fibers doped with different dyes exhibit critically-suppressed Förster resonance energy transfer, limited at joints between different fiber species. This leads to obtain hybrid materials with mostly physically-separated acceptors and donors, thus largely preventing donor quenching and making much easier to achieve simultaneous lasing from multiple spectral bands. Coherent backscattering experiments are also performed on the system, suggesting the onset of random lasing features. These new organic lasing systems might find application in microfluidic devices where flexible and bidirectional excitation sources are needed, optical sensors, and nanophotonics.
△ Less
Submitted 3 July, 2018;
originally announced July 2018.
-
Nanowire-Intensified MEF in Hybrid Polymer-Plasmonic Electrospun Filaments
Authors:
Andrea Camposeo,
Radoslaw Jurga,
Maria Moffa,
Alberto Portone,
Francesco Cardarelli,
Fabio Della Sala,
Cristian Ciracì,
Dario Pisignano
Abstract:
Hybrid polymer-plasmonic nanostructures might combine high enhancement of localized fields from metal nanoparticles with light confinement and long-range transport in subwavelength dielectric structures. Here we report on the complex behavior of fluorophores coupling to Au nanoparticles within polymer nanowires, which features localized metal-enhanced fluorescence (MEF) with unique characteristics…
▽ More
Hybrid polymer-plasmonic nanostructures might combine high enhancement of localized fields from metal nanoparticles with light confinement and long-range transport in subwavelength dielectric structures. Here we report on the complex behavior of fluorophores coupling to Au nanoparticles within polymer nanowires, which features localized metal-enhanced fluorescence (MEF) with unique characteristics compared to conventional structures. The intensification effect when the particle is placed in the organic filaments is remarkably higher with respect to thin films of comparable thickness, thus highlighting a specific, nanowire-related enhancement of MEF effects. A dependence on the confinement volume in the dielectric nanowire is also evidenced, with MEF significantly increasing upon reducing the wire diameter. These findings are rationalized by finite element simulations, predicting a position-dependent enhancement of the quantum yield of fluorophores embedded in the fibers. Calculation of the ensemble-averaged fluorescence enhancement unveils the possibility of strongly enhancing the overall emission intensity for structures with size twice the diameter of the embedded metal particles. These new, hybrid fluorescent systems with localized enhanced emission, as well as the general Nanowire-Intensified MEF effect associated to them, are highly relevant for developing nanoscale light-emitting devices with high efficiency and inter-coupled through nanofiber networks, highly sensitive optical sensors, and novel laser architectures.
△ Less
Submitted 15 April, 2018;
originally announced April 2018.
-
Electrospun Conjugated Polymer/Fullerene Hybrid Fibers: Photoactive Blends, Conductivity through Tunnelling-AFM, Light-Scattering, and Perspective for Their Use in Bulk-Heterojunction Organic Solar Cells
Authors:
Zhenhua Yang,
Maria Moffa,
Ying Liu,
Hongfei Li,
Luana Persano,
Andrea Camposeo,
Rosalba Saija,
Maria Antonia Iatì,
Onofrio M. Maragò,
Dario Pisignano,
Chang-Yong Nam,
Eyal Zussman,
Miriam Rafailovich
Abstract:
Hybrid conjugated polymer/fullerene filaments based on MEH-PPV/PVP/PCBM are prepared by electrospinning, and their properties assessed by scanning electron, atomic and lateral force, tunnelling, and confocal microscopy, as well as by attenuated total reflection Fourier transform-infrared spectroscopy, photoluminescence quantum yield and spatially-resolved fluorescence. Highlighted features include…
▽ More
Hybrid conjugated polymer/fullerene filaments based on MEH-PPV/PVP/PCBM are prepared by electrospinning, and their properties assessed by scanning electron, atomic and lateral force, tunnelling, and confocal microscopy, as well as by attenuated total reflection Fourier transform-infrared spectroscopy, photoluminescence quantum yield and spatially-resolved fluorescence. Highlighted features include ribbon-shape of the realized fibers, and the persistence of a network serving as a template for heterogeneous active layers in solar cell devices. A set of favorable characteristics is evidenced in this way in terms of homogeneous charge transport behavior and formation of effective interfaces for diffusion and dissociation of photogenerated excitons. The interaction of the organic filaments with light, exhibiting specific light-scattering properties of the nanofibrous mat, might also contribute to spreading incident radiation across the active layers, thus potentially enhancing photovoltaic performance. This method might be applied to other electron donor-electron acceptor material systems for the fabrication of solar cell devices enhanced by nanofibrillar morphologies embedding conjugated polymers and fullerene compounds.
△ Less
Submitted 26 January, 2018;
originally announced January 2018.
-
Interplay of Stimulated Emission and Fluorescence Resonance Energy Transfer in Electrospun Light-Emitting Fibers
Authors:
Lech Sznitko,
Luigi Romano,
Andrea Camposeo,
Dominika Wawrzynczyk,
Konrad Cyprych,
Jaroslaw Mysliwiec,
Dario Pisignano
Abstract:
Concomitant amplified spontaneous emission (ASE) and Förster resonance energy transfer (FRET) are investigated in electrospun light-emitting fibers. Upon dye-doping with a proper FRET couple system, free-standing fibrous mats exhibit tunable FRET efficiency and, more importantly, tailorable threshold conditions for stimulated emission. In addition, effective scattering of light is found in the fib…
▽ More
Concomitant amplified spontaneous emission (ASE) and Förster resonance energy transfer (FRET) are investigated in electrospun light-emitting fibers. Upon dye-doping with a proper FRET couple system, free-standing fibrous mats exhibit tunable FRET efficiency and, more importantly, tailorable threshold conditions for stimulated emission. In addition, effective scattering of light is found in the fibrous material by measuring the transport mean free path of photons by coherent backscattering experiments. The interplay of ASE and FRET leads to high control in designing optical properties from electrospun fibers, including the occurrence of simultaneous stimulated emission from both donor and acceptor components. All tunable-optical properties are highly interesting in view of applying electrospun light-emitting materials in lightening, display, and sensing technologies.
△ Less
Submitted 28 December, 2017;
originally announced December 2017.
-
Stretching graphene using polymeric micro-muscles
Authors:
Francesco Colangelo,
Alessandro Pitanti,
Vaidotas Mišeikis,
Camilla Coletti,
Pasqualantonio Pingue,
Dario Pisignano,
Fabio Beltram,
Alessandro Tredicucci,
Stefano Roddaro
Abstract:
The control of strain in two-dimensional materials opens exciting perspectives for the engineering of their electronic properties. While this expectation has been validated by artificial-lattice studies, it remains elusive in the case of atomic lattices. Remarkable results were obtained on nanobubbles and nano-wrinkles, or using scanning probes; microscale strain devices were implemented exploitin…
▽ More
The control of strain in two-dimensional materials opens exciting perspectives for the engineering of their electronic properties. While this expectation has been validated by artificial-lattice studies, it remains elusive in the case of atomic lattices. Remarkable results were obtained on nanobubbles and nano-wrinkles, or using scanning probes; microscale strain devices were implemented exploiting deformable substrates or external loads. These devices lack, however, the flexibility required to fully control and investigate arbitrary strain profiles. Here, we demonstrate a novel approach making it possible to induce strain in graphene using polymeric micrometric artificial muscles (MAMs) that contract in a controllable and reversible way under an electronic stimulus. Our method exploits the mechanical response of poly-methyl-methacrylate (PMMA) to electron-beam irradiation. Inhomogeneous anisotropic strain and out-of-plane deformation are demonstrated and studied by Raman, scanning-electron and atomic-force microscopy. These can all be easily combined with the present device architecture. The flexibility of the present method opens new opportunities for the investigation of strain and nanomechanics in two-dimensional materials.
△ Less
Submitted 27 November, 2017;
originally announced November 2017.
-
Effects of Nanoparticles on the Dynamic Morphology of Electrified Jets
Authors:
Marco Lauricella,
Dario Pisignano,
Sauro Succi
Abstract:
We investigate the effects of nanoparticles on the onset of varicose and whipping instabilities in the dynamics of electrified jets. In particular, we show that the non-linear interplay between the mass of the nanoparticles and electrostatic instabilities, gives rise to qualitative changes of the dynamic morphology of the jet, which in turn, drastically affect the final deposition pattern in elect…
▽ More
We investigate the effects of nanoparticles on the onset of varicose and whipping instabilities in the dynamics of electrified jets. In particular, we show that the non-linear interplay between the mass of the nanoparticles and electrostatic instabilities, gives rise to qualitative changes of the dynamic morphology of the jet, which in turn, drastically affect the final deposition pattern in electrospinning experiments. It is also shown that even a tiny amount of excess mass, of the order of a few percent, may more than double the radius of the electrospun fiber, with substantial implications for the design of experiments involving electrified jets as well as spun organic fibers.
△ Less
Submitted 12 October, 2017; v1 submitted 3 October, 2017;
originally announced October 2017.
-
Electrostatic mechanophores in tuneable light-emitting piezo-polymer nanowires
Authors:
Luana Persano,
Andrea Camposeo,
Aleksandr V. Terentjevs,
Fabio Della Sala,
Eduardo Fabiano,
Martina Montinaro,
Dario Pisignano
Abstract:
Electromechanical coupling through piezoelectric polymer chains allows the emission of organic molecules in active nanowires to be tuned. This effect is evidenced by highly bendable arrays of counter-ion dye-doped nanowires made of a poly(vinylidenefluoride) copolymer. A reversible redshift of the dye emission is found upon the application of dynamic stress during highly accurate bending experimen…
▽ More
Electromechanical coupling through piezoelectric polymer chains allows the emission of organic molecules in active nanowires to be tuned. This effect is evidenced by highly bendable arrays of counter-ion dye-doped nanowires made of a poly(vinylidenefluoride) copolymer. A reversible redshift of the dye emission is found upon the application of dynamic stress during highly accurate bending experiments. By density functional theory calculations it is found that these photophysical properties are associated with mechanical stresses applied to electrostatically interacting molecular systems, namely to counterion-mediated states that involve light-emitting molecules as well as charged regions of piezoelectric polymer chains. These systems are an electrostatic class of supramolecular functional stress-sensitive units, which might impart new functionalities in hybrid molecular nanosystems and anisotropic nanostructures for sensing devices and soft robotics.
△ Less
Submitted 2 June, 2017;
originally announced June 2017.
-
Highly sticky surfaces made by electrospun polymer nanofibers
Authors:
S. Varagnolo,
F. Raccanello,
M. Pierno,
G. Mistura,
M. Moffa,
L. Persano,
D. Pisignano
Abstract:
We report on a comprehensive study of the unique adhesive properties of mats of polymethylmethacrylate (PMMA) nanofibers produced by electrospinning. Fibers are deposited on glass, varying the diameter and the relative orientation of the polymer filaments (random vs aligned configuration). While no significant variation is observed in the static contact angle (about 130°) of deposited water drops…
▽ More
We report on a comprehensive study of the unique adhesive properties of mats of polymethylmethacrylate (PMMA) nanofibers produced by electrospinning. Fibers are deposited on glass, varying the diameter and the relative orientation of the polymer filaments (random vs aligned configuration). While no significant variation is observed in the static contact angle (about 130°) of deposited water drops upon changing the average fiber diameter up to the micrometer scale, fibers are found to exhibit unequalled water adhesion. Placed vertically, they can hold up water drops as large as 60 microL, more than twice the values typically obtained with hairy surfaces prepared by different methods. For aligned fibers with anisotropic wetting behavior, the maximum volume measured in the direction perpendicular to the fibers goes up to 90 μL. This work suggests new routes to tailor the wetting behavior on extended areas by nanofiber coatings, with possible applications in adsorbing and catalytic surfaces, microfluidic devices, and filtration technologies.
△ Less
Submitted 18 January, 2017;
originally announced January 2017.
-
Anisotropic conjugated polymer chain conformation tailors the energy migration in nanofibers
Authors:
Andrea Camposeo,
Ryan D. Pensack,
Maria Moffa,
Vito Fasano,
Davide Altamura,
Cinzia Giannini,
Dario Pisignano,
Gregory D. Scholes
Abstract:
Conjugated polymers are complex multi-chromophore systems, with emission properties strongly dependent on the electronic energy transfer through active sub-units. Although the packing of the conjugated chains in the solid state is known to be a key factor to tailor the electronic energy transfer and the resulting optical properties, most of the current solution-based processing methods do not allo…
▽ More
Conjugated polymers are complex multi-chromophore systems, with emission properties strongly dependent on the electronic energy transfer through active sub-units. Although the packing of the conjugated chains in the solid state is known to be a key factor to tailor the electronic energy transfer and the resulting optical properties, most of the current solution-based processing methods do not allow for effectively controlling the molecular order, thus making the full unveiling of energy transfer mechanisms very complex. Here we report on conjugated polymer fibers with tailored internal molecular order, leading to a significant enhancement of the emission quantum yield. Steady state and femtosecond time-resolved polarized spectroscopies evidence that excitation is directed toward those chromophores oriented along the fiber axis, on a typical timescale of picoseconds. These aligned and more extended chromophores, resulting from the high stretching rate and electric field applied during the fiber spinning process, lead to improved emission properties. Conjugated polymer fibers are relevant to develop optoelectronic plastic devices with enhanced and anisotropic properties.
△ Less
Submitted 18 November, 2016;
originally announced November 2016.
-
Effects of Orthogonal Rotating Electric Fields on Electrospinning Process
Authors:
Marco Lauricella,
Federico Cipolletta,
Giuseppe Pontrelli,
Dario Pisignano,
Sauro Succi
Abstract:
Electrospinning is a nanotechnology process whereby an external electric field is used to accelerate and stretch a charged polymer jet, so as to produce fibers with nanoscale diameters. In quest of a further reduction in the cross section of electrified jets hence of a better control on the morphology of the resulting electrospun fibers, we explore the effects of an external rotating electric fiel…
▽ More
Electrospinning is a nanotechnology process whereby an external electric field is used to accelerate and stretch a charged polymer jet, so as to produce fibers with nanoscale diameters. In quest of a further reduction in the cross section of electrified jets hence of a better control on the morphology of the resulting electrospun fibers, we explore the effects of an external rotating electric field orthogonal to the jet direction. Through extensive particle simulations, it is shown that by a proper tuning of the electric field amplitude and frequency, a reduction of up to a $30 \%$ in the aforementioned radius can be obtained, thereby opening new perspectives in the design of future ultra-thin electrospun fibres. Applications can be envisaged in the fields of nanophotonic components as well as for designing new and improved filtration materials.
△ Less
Submitted 4 September, 2017; v1 submitted 3 October, 2016;
originally announced October 2016.
-
Threading Through Macrocycles Enhances the Performance of Carbon Nanotubes as Polymer Fillers
Authors:
A. López-Moreno,
B. Nieto-Ortega,
M. Moffa,
A. de Juan,
M. Mar Bernal,
J. P. Fernández-Blázquez,
J. J. Vilatela,
D. Pisignano,
E. M. Pérez
Abstract:
In this work we study the reinforcement of polymers by mechanically interlocked derivatives of single-walled carbon nanotubes (SWNTs). We compare the mechanical properties of fibers made of polymers and of composites with pristine single-walled carbon nanotubes (SWNTs), mechanically interlocked derivatives of SWNTs (MINTs) and the corresponding supramolecular models. Improvements of both Young's m…
▽ More
In this work we study the reinforcement of polymers by mechanically interlocked derivatives of single-walled carbon nanotubes (SWNTs). We compare the mechanical properties of fibers made of polymers and of composites with pristine single-walled carbon nanotubes (SWNTs), mechanically interlocked derivatives of SWNTs (MINTs) and the corresponding supramolecular models. Improvements of both Young's modulus and tensile strength of up to 200 % were observed for the polystyrene-MINTs samples with an optimized loading of just 0.01 wt.%, while the supramolecular models with identical chemical composition and loading showed negligible or even detrimental influence. This behavior is found for three different types of SWNTs and two types of macrocycles. Molecular dynamics simulations show that the polymer adopts an elongated conformation parallel to the SWNT when interacting with MINT fillers, irrespective of the macrocycle chemical nature, whereas a more globular structure is taken upon facing with either pristine SWNTs or supramolecular models. The MINT composite architecture thus leads to a more efficient exploitation of the axial properties of the SWNTs and of the polymer chain at the interface, in agreement with experimental results. Our findings demonstrate that the mechanical bond imparts distinctive advantageous properties to SWNT derivatives as polymer fillers.
△ Less
Submitted 2 August, 2016;
originally announced August 2016.
-
Shear piezoelectricity in poly(vinylidenefluoride-co-trifluoroethylene): full piezotensor coefficients by molecular modeling, biaxial transverse response, and use in suspended energy-harvesting nanostructures
Authors:
Luana Persano,
Alessandra Catellani,
Canan Dagdeviren,
Yinji Ma,
Xiaogang Guo,
Yonggang Huang,
Arrigo Calzolari,
Dario Pisignano
Abstract:
The intrinsic flexible character of polymeric materials also causes remarkable strain deformations along directions perpendicular to the applied stress. Here the biaxial response in the shear piezoelectricity of polyvinylidenefluoride copolymers is analyzed and their full piezoelectric tensors are provided. The microscopic shear is exploited in single suspended nanowires bent by localized loading…
▽ More
The intrinsic flexible character of polymeric materials also causes remarkable strain deformations along directions perpendicular to the applied stress. Here the biaxial response in the shear piezoelectricity of polyvinylidenefluoride copolymers is analyzed and their full piezoelectric tensors are provided. The microscopic shear is exploited in single suspended nanowires bent by localized loading to couple flexural deformation and transverse piezoelectric response.
△ Less
Submitted 4 July, 2016;
originally announced July 2016.
-
Optimization of electrospinning techniques for the realization of nanofiber plastic lasers
Authors:
L. Persano,
M. Moffa,
V. Fasano,
M. Montinaro,
G. Morello,
V. Resta,
D. Spadaro,
P. G. Gucciardi,
O. M. Maragò,
A. Camposeo,
D. Pisignano
Abstract:
Electrospinning technologies for the realization of active polymeric nanomaterials can be easily up-scaled, opening perspectives to industrial exploitation, and due to their versatility they can be employed to finely tailor the size, morphology and macroscopic assembly of fibers as well as their functional properties. Light-emitting or other active polymer nanofibers, made of conjugated polymers o…
▽ More
Electrospinning technologies for the realization of active polymeric nanomaterials can be easily up-scaled, opening perspectives to industrial exploitation, and due to their versatility they can be employed to finely tailor the size, morphology and macroscopic assembly of fibers as well as their functional properties. Light-emitting or other active polymer nanofibers, made of conjugated polymers or of blends embedding chromophores or other functional dopants, are suitable for various applications in advanced photonics and sensing technologies. In particular, their almost one-dimensional geometry and finely tunable composition make them interesting materials for developing novel lasing devices. However, electrospinning techniques rely on a large variety of parameters and possible experimental geometries, and they need to be carefully optimized in order to obtain suitable topographical and photonic properties in the resulting nanostructures. Targeted features include smooth and uniform fiber surface, dimensional control, as well as filament alignment, enhanced light emission, and stimulated emission. We here present various optimization strategies for electrospinning methods which have been implemented and developed by us for the realization of lasing architectures based on polymer nanofibers. The geometry of the resulting nanowires leads to peculiar light-scattering from spun filaments, and to controllable lasing characteristics.
△ Less
Submitted 25 March, 2016;
originally announced March 2016.
-
Control of photon transport properties in nanocomposite nanowires
Authors:
M. Moffa,
V. Fasano,
A. Camposeo,
L. Persano,
D. Pisignano
Abstract:
Active nanowires and nanofibers can be realized by the electric-field induced stretching of polymer solutions with sufficient molecular entanglements. The resulting nanomaterials are attracting an increasing attention in view of their application in a wide variety of fields, including optoelectronics, photonics, energy harvesting, nanoelectronics, and microelectromechanical systems. Realizing nano…
▽ More
Active nanowires and nanofibers can be realized by the electric-field induced stretching of polymer solutions with sufficient molecular entanglements. The resulting nanomaterials are attracting an increasing attention in view of their application in a wide variety of fields, including optoelectronics, photonics, energy harvesting, nanoelectronics, and microelectromechanical systems. Realizing nanocomposite nanofibers is especially interesting in this respect. In particular, methods suitable for embedding inorganic nanocrystals in electrified jets and then in active fiber systems allow for controlling light-scattering and refractive index properties in the realized fibrous materials. We here report on the design, realization, and morphological and spectroscopic characterization of new species of active, composite nanowires and nanofibers for nanophotonics. We focus on the properties of light-confinement and photon transport along the nanowire longitudinal axis, and on how these depend on nanoparticle incorporation. Optical losses mechanisms and their influence on device design and performances are also presented and discussed.
△ Less
Submitted 25 March, 2016;
originally announced March 2016.
-
Three-Dimensional Model for Electrospinning Processes in Controlled Gas Counterflow
Authors:
Marco Lauricella,
Dario Pisignano,
Sauro Succi
Abstract:
We study the effects of a controlled gas flow on the dynamics of electrified jets in the electrospinning process. The main idea is to model the air drag effects of the gas flow by using a non-linear Langevin-like approach. The model is employed to investigate the dynamics of electrified polymer jets at different conditions of air drag force, showing that a controlled gas counterflow can lead to a…
▽ More
We study the effects of a controlled gas flow on the dynamics of electrified jets in the electrospinning process. The main idea is to model the air drag effects of the gas flow by using a non-linear Langevin-like approach. The model is employed to investigate the dynamics of electrified polymer jets at different conditions of air drag force, showing that a controlled gas counterflow can lead to a decrease of the average diameter of electrospun fibers, and potentially to an improvement of the quality of electrospun products. We probe the influence of air drag effects on the bending instabilities of the jet and on its angular fluctuations during the process. The insights provided by this study might prove useful for the design of future electrospinning experiments and polymer nanofiber materials.
△ Less
Submitted 29 February, 2016;
originally announced March 2016.
-
Ratiometric Organic Fibers for Localized and Reversible Ion Sensing with Micrometer-Scale Spatial Resolution
Authors:
Loretta L. del Mercato,
Maria Moffa,
Rosaria Rinaldi,
Dario Pisignano
Abstract:
A fundamental issue in biomedical and environmental sciences is the development of sensitive and robust sensors able to probe the analyte of interest, under physiological and pathological conditions or in environmental samples, and with very high spatial resolution. In this work, novel hybrid organic fibers that can effectively report the analyte concentration within the local microenvironment are…
▽ More
A fundamental issue in biomedical and environmental sciences is the development of sensitive and robust sensors able to probe the analyte of interest, under physiological and pathological conditions or in environmental samples, and with very high spatial resolution. In this work, novel hybrid organic fibers that can effectively report the analyte concentration within the local microenvironment are reported. The nanostructured and flexible wires are prepared by embedding fluorescent pH sensors based on seminaphtho-rhodafluor-1-dextran conjugate. By adjusting capsule/polymer ratio and spinning conditions, the diameter of the fibers and the alignment of the reporting capsules are both tuned. The hybrid wires display excellent stability, high sensitivity, as well as reversible response, and their operation relies on effective diffusional kinetic coupling of the sensing regions and the embedding polymer matrix. These devices are believed to be a powerful new sensing platform for clinical diagnostics, bioassays and environmental monitoring.
△ Less
Submitted 8 November, 2015;
originally announced November 2015.
-
Controlled atmosphere electrospinning of organic nanofibers with improved light emission and waveguiding properties
Authors:
Vito Fasano,
Maria Moffa,
Andrea Camposeo,
Luana Persano,
Dario Pisignano
Abstract:
Electrospinning in controlled nitrogen atmosphere is developed for the realization of active polymer nanofibers. Fibers electrospun under controlled atmospheric conditions are found to be smoother and more uniform than samples realized by conventional electrospinning processes performed in air. In addition, they exhibit peculiar composition, incorporating a greatly reduced oxygen content during ma…
▽ More
Electrospinning in controlled nitrogen atmosphere is developed for the realization of active polymer nanofibers. Fibers electrospun under controlled atmospheric conditions are found to be smoother and more uniform than samples realized by conventional electrospinning processes performed in air. In addition, they exhibit peculiar composition, incorporating a greatly reduced oxygen content during manufacturing, which favors enhanced optical properties and increases emission quantum yield. Active waveguides with optical losses coefficients lowered by ten times with respect to fibers spun in air are demonstrated through this method. These findings make the process very promising for the highly-controlled production of active polymer nanostructures for photonics, electronics and sensing.
△ Less
Submitted 16 November, 2015; v1 submitted 20 October, 2015;
originally announced October 2015.
-
Multifunctional polymer nanofibers: UV emission, optical gain, anisotropic wetting and high hydrophobicity for next flexible excitation sources
Authors:
Giovanni Morello,
Rita Manco,
Maria Moffa,
Luana Persano,
Andrea Camposeo,
Dario Pisignano
Abstract:
The use of UV light sources is highly relevant in many fields of science, being directly related to all those detection and diagnosis procedures which are based on fluorescence spectroscopy. Depending on the specific application, UV light-emitting materials are desired to feature a number of opto-mechanical properties, including brightness, optical gain for being used in laser devices, flexibility…
▽ More
The use of UV light sources is highly relevant in many fields of science, being directly related to all those detection and diagnosis procedures which are based on fluorescence spectroscopy. Depending on the specific application, UV light-emitting materials are desired to feature a number of opto-mechanical properties, including brightness, optical gain for being used in laser devices, flexibility to conform with different lab-on-chip architectures, and tailorable wettability to control and minimize their interaction with ambient humidity and fluids. In this work, we introduce multifunctional, UV-emitting electrospun fibers with both optical gain and anisotropic hydrophobicity greatly enhanced compared to films. Fibers are described by the onset of a composite wetting state and their arrangement in uniaxial arrays further favours liquid directional control. The low gain threshold and optical losses, the plastic nature and the flexibility and stability of these UV-emitting fibers make them interesting for building light-emitting devices and microlasers. Furthermore, the found anisotropic hydrophobicity is strongly synergic with optical properties, reducing interfacial interactions with liquids and enabling smart functional surfaces for droplet microfluidic and wearable applications.
△ Less
Submitted 16 November, 2015; v1 submitted 24 September, 2015;
originally announced September 2015.
-
Metal-Enhanced Near-Infrared Fluorescence by Micropatterned Gold Nanocages
Authors:
Andrea Camposeo,
Luana Persano,
Rita Manco,
Yi Wang,
Pompilio Del Carro,
Chao Zhang,
Zhi-Yuan Li,
Dario Pisignano,
Younan Xia
Abstract:
In metal-enhanced fluorescence (MEF), the localized surface plasmon resonances of metallic nanostructures amplify the absorption of excitation light and assist in radiating the consequent fluorescence of nearby molecules to the far-field. This effect is at the base of various technologies that have strong impact on fields such as optics, medical diagnostics and biotechnology. Among possible emissi…
▽ More
In metal-enhanced fluorescence (MEF), the localized surface plasmon resonances of metallic nanostructures amplify the absorption of excitation light and assist in radiating the consequent fluorescence of nearby molecules to the far-field. This effect is at the base of various technologies that have strong impact on fields such as optics, medical diagnostics and biotechnology. Among possible emission bands, those in the near-infrared (NIR) are particularly intriguing and widely used in proteomics and genomics due to its noninvasive character for biomolecules, living cells, and tissues, which greatly motivates the development of effective, and eventually multifunctional NIR-MEF platforms. Here we demonstrate NIR-MEF substrates based on Au nanocages micropatterned with a tight spatial control. The dependence of the fluorescence enhancement on the distance between the nanocage and the radiating dipoles is investigated experimentally and modeled by taking into account the local electric field enhancement and the modified radiation and absorption rates of the emitting molecules. At a distance around 80 nm, a maximum enhancement up to 2-7 times with respect to the emission from pristine dyes (in the region 660 nm-740 nm) is estimated for films and electrospun nanofibers. Due to their chemical stability, finely tunable plasmon resonances, and large light absorption cross sections, Au nanocages are ideal NIR-MEF agents. When these properties are integrated with the hollow interior and controllable surface porosity, it is feasible to develop a nanoscale system for targeted drug delivery with the diagnostic information encoded in the fluorophore.
△ Less
Submitted 16 November, 2015; v1 submitted 24 September, 2015;
originally announced September 2015.
-
JETSPIN: a specific-purpose open-source software for simulations of nanofiber electrospinning
Authors:
Marco Lauricella,
Giuseppe Pontrelli,
Ivan Coluzza,
Dario Pisignano,
Sauro Succi
Abstract:
We present the open-source computer program JETSPIN, specifically designed to simulate the electrospinning process of nanofibers. Its capabilities are shown with proper reference to the underlying model, as well as a description of the relevant input variables and associated test-case simulations. The various interactions included in the electrospinning model implemented in JETSPIN are discussed i…
▽ More
We present the open-source computer program JETSPIN, specifically designed to simulate the electrospinning process of nanofibers. Its capabilities are shown with proper reference to the underlying model, as well as a description of the relevant input variables and associated test-case simulations. The various interactions included in the electrospinning model implemented in JETSPIN are discussed in detail. The code is designed to exploit different computational architectures, from single to parallel processor workstations. This paper provides an overview of JETSPIN, focusing primarily on its structure, parallel implementations, functionality, performance, and availability.
△ Less
Submitted 26 August, 2015;
originally announced August 2015.
-
Surface-enhanced Raman spectroscopy in 3D electrospun nanofiber mats coated with gold nanorods
Authors:
A. Camposeo,
D. Spadaro,
D. Magrì,
M. Moffa,
P. G. Gucciardi,
L. Persano,
O. M. Maragò,
D. Pisignano
Abstract:
Nanofibers functionalized by metal nanostructures and particles are exploited as effective flexible substrates for SERS analysis. Their complex three-dimensional structure may provide Raman signals enhanced by orders of magnitude compared to untextured surfaces. Understanding the origin of such improved performances is therefore very important for pushing nanofiber-based analytical technologies to…
▽ More
Nanofibers functionalized by metal nanostructures and particles are exploited as effective flexible substrates for SERS analysis. Their complex three-dimensional structure may provide Raman signals enhanced by orders of magnitude compared to untextured surfaces. Understanding the origin of such improved performances is therefore very important for pushing nanofiber-based analytical technologies to their upper limit. Here we report on polymer nanofiber mats which can be exploited as substrates for enhancing the Raman spectra of adsorbed probe molecules. The increased surface area and the scattering of light in the nanofibrous system are individually analyzed as mechanisms to enhance Raman scattering. The deposition of gold nanorods on the fibers further amplifies Raman signals due to SERS. This study suggests that Raman signals can be finely tuned in intensity and effectively enhanced in nanofiber mats and arrays by properly tailoring the architecture, composition, and light-scattering properties of the complex networks of filaments.
△ Less
Submitted 15 March, 2016; v1 submitted 27 July, 2015;
originally announced July 2015.
-
The JETSPIN User Manual (Version 1.20)
Authors:
Marco Lauricella,
Giuseppe Pontrelli,
Ivan Coluzza,
Dario Pisignano,
Sauro Succi
Abstract:
JETSPIN is an open-source computer program specifically designed to simulate the electrospinning process of nanofibers. This manual provides an overview of JETSPIN, focusing primarily on its structure, parallel implementations, functionality, performance, and availability. The code is designed to exploit different computational architectures, from single to parallel processor workstations.
JETSPIN is an open-source computer program specifically designed to simulate the electrospinning process of nanofibers. This manual provides an overview of JETSPIN, focusing primarily on its structure, parallel implementations, functionality, performance, and availability. The code is designed to exploit different computational architectures, from single to parallel processor workstations.
△ Less
Submitted 23 July, 2015;
originally announced July 2015.
-
Sub-ms dynamics of the instability onset of electrospinning
Authors:
Martina Montinaro,
Vito Fasano,
Maria Moffa,
Andrea Camposeo,
Luana Persano,
Marco Lauricella,
Sauro Succi,
Dario Pisignano
Abstract:
Electrospun polymer jets are imaged for the first time at an ultra-high rate of 10,000 frames per second, investigating the process dynamics, and the instability propagation velocity and displacement in space. The polymer concentration, applied voltage bias and needle-collector distance are systematically varied, and their influence on the instability propagation velocity and on the jet angular fl…
▽ More
Electrospun polymer jets are imaged for the first time at an ultra-high rate of 10,000 frames per second, investigating the process dynamics, and the instability propagation velocity and displacement in space. The polymer concentration, applied voltage bias and needle-collector distance are systematically varied, and their influence on the instability propagation velocity and on the jet angular fluctuations analyzed. This allows us to unveil the instability formation and cycling behavior, and its exponential growth at the onset, exhibiting radial growth rates of the order of 10^3 s^-1. Allowing the conformation and evolution of polymeric solutions to be studied in depth, high-speed imaging at sub-ms scale shows a significant potential for improving the fundamental knowledge of electrified jets, leading to obtain finely controllable bending and solution stretching in electrospinning, and consequently better designed nanofibers morphologies and structures.
△ Less
Submitted 1 May, 2015; v1 submitted 10 April, 2015;
originally announced April 2015.
-
Non-linear Langevin model for the early-stage dynamics of electrospinning jets
Authors:
Marco Lauricella,
Giuseppe Pontrelli,
Dario Pisignano,
Sauro Succi
Abstract:
We present a non-linear Langevin model to investigate the early-stage dynamics of electrified polymer jets in electrospinning experiments. In particular, we study the effects of air drag force on the uniaxial elongation of the charged jet, right after ejection from the nozzle. Numerical simulations show that the elongation of the jet filament close to the injection point is significantly affected…
▽ More
We present a non-linear Langevin model to investigate the early-stage dynamics of electrified polymer jets in electrospinning experiments. In particular, we study the effects of air drag force on the uniaxial elongation of the charged jet, right after ejection from the nozzle. Numerical simulations show that the elongation of the jet filament close to the injection point is significantly affected by the non-linear drag exerted by the surrounding air. These result provide useful insights for the optimal design of current and future electrospinning experiments.
△ Less
Submitted 18 March, 2015;
originally announced March 2015.
-
Different regimes of the uniaxial elongation of electrically charged viscoelastic jets due to dissipative air drag
Authors:
Marco Lauricella,
Giuseppe Pontrelli,
Ivan Coluzza,
Dario Pisignano,
Sauro Succi
Abstract:
We investigate the effects of dissipative air drag on the dynamics of electrified jets in the initial stage of the electrospinning process. The main idea is to use a Brownian noise to model air drag effects on the uniaxial elongation of the jets. The developed numerical model is used to probe the dynamics of electrified polymer jets at different conditions of air drag force, showing that the dynam…
▽ More
We investigate the effects of dissipative air drag on the dynamics of electrified jets in the initial stage of the electrospinning process. The main idea is to use a Brownian noise to model air drag effects on the uniaxial elongation of the jets. The developed numerical model is used to probe the dynamics of electrified polymer jets at different conditions of air drag force, showing that the dynamics of the charged jet is strongly biased by the presence of air drag forces. This study provides prospective beneficial implications for improving forthcoming electrospinning experiments.
△ Less
Submitted 1 July, 2015; v1 submitted 16 March, 2015;
originally announced March 2015.
-
Electrospun amplified fiber optics
Authors:
Giovanni Morello,
Andrea Camposeo,
Maria Moffa,
Dario Pisignano
Abstract:
A lot of research is focused on all-optical signal processing, aiming to obtain effective alternatives to existing data transmission platforms. Amplification of light in fiber optics, such as in Erbium-doped fiber amplifiers, is especially important for an efficient signal transmission. However, the complex fabrication methods, involving high-temperature processes performed in highly pure environm…
▽ More
A lot of research is focused on all-optical signal processing, aiming to obtain effective alternatives to existing data transmission platforms. Amplification of light in fiber optics, such as in Erbium-doped fiber amplifiers, is especially important for an efficient signal transmission. However, the complex fabrication methods, involving high-temperature processes performed in highly pure environment, slow down the fabrication and make amplified components expensive with respect to an ideal, high-throughput and room temperature production. Here, we report on near infrared polymer fiber amplifiers, working over a band of about 20 nm. The fibers are cheap, spun with a process entirely carried out at room temperature, and show amplified spontaneous emission with good gain coefficients as well as low optical losses (a few cm^-1). The amplification process is favoured by the high fiber quality and low self-absorption. The found performance metrics promise to be suitable for short-distance operation, and the large variety of commercially-available doping dyes might allow for effective multi-wavelength operation by electrospun amplified fiber optics.
△ Less
Submitted 6 April, 2015; v1 submitted 25 February, 2015;
originally announced February 2015.
-
Cooperativity in the enhanced piezoelectric response of polymer nanowires
Authors:
Luana Persano,
Canan Dagdeviren,
Claudio Maruccio,
Laura De Lorenzis,
Dario Pisignano
Abstract:
We provide a detailed insight into piezoelectric energy generation from arrays of polymer nanofibers. For sake of comparison, we firstly measure individual poly(vinylidenefluoride-co-trifluoroethylene) (P(VDF-TrFe)) fibers at well-defined levels of compressive stress. Under an applied load of 2 mN, single nanostructures generate a voltage of 0.45 mV. We show that under the same load conditions, fi…
▽ More
We provide a detailed insight into piezoelectric energy generation from arrays of polymer nanofibers. For sake of comparison, we firstly measure individual poly(vinylidenefluoride-co-trifluoroethylene) (P(VDF-TrFe)) fibers at well-defined levels of compressive stress. Under an applied load of 2 mN, single nanostructures generate a voltage of 0.45 mV. We show that under the same load conditions, fibers in dense arrays exhibit a voltage output higher by about two orders of magnitude. Numerical modelling studies demonstrate that the enhancement of the piezoelectric response is a general phenomenon associated to the electromechanical interaction among adjacent fibers, namely a cooperative effect depending on specific geometrical parameters. This establishes new design rules for next piezoelectric nano-generators and sensors.
△ Less
Submitted 25 February, 2015; v1 submitted 30 October, 2014;
originally announced October 2014.
-
Organic nanofibers embedding stimuli-responsive threaded molecular components
Authors:
Vito Fasano,
Massimo Baroncini,
Maria Moffa,
Donata Iandolo,
Andrea Camposeo,
Alberto Credi,
Dario Pisignano
Abstract:
While most of the studies on molecular machines have been performed in solution, interfacing these supramolecular systems with solid-state nanostructures and materials is very important in view of their utilization in sensing components working by chemical and photonic actuation. Host polymeric materials, and particularly polymer nanofibers, enable the manipulation of the functional molecules cons…
▽ More
While most of the studies on molecular machines have been performed in solution, interfacing these supramolecular systems with solid-state nanostructures and materials is very important in view of their utilization in sensing components working by chemical and photonic actuation. Host polymeric materials, and particularly polymer nanofibers, enable the manipulation of the functional molecules constituting molecular machines, and provide a way to induce and control the supramolecular organization. Here, we present electrospun nanocomposites embedding a self-assembling rotaxane-type system that is responsive to both optical (UV-visible light) and chemical (acid/base) stimuli. The system includes a molecular axle comprised of a dibenzylammonium recognition site and two azobenzene end groups, and a dibenzo[24]crown-8 molecular ring. The dethreading and rethreading of the molecular components in nanofibers induced by exposure to base and acid vapors, as well as the photoisomerization of the azobenzene end groups, occur in a similar manner to what observed in solution. Importantly, however, the nanoscale mechanical function following external chemical stimuli induces a measurable variation of the macroscopic mechanical properties of nanofibers aligned in arrays, whose Young's modulus is significantly enhanced upon dethreading of the axles from the rings. These composite nanosystems show therefore great potential for application in chemical sensors, photonic actuators and environmentally responsive materials.
△ Less
Submitted 15 October, 2014; v1 submitted 8 October, 2014;
originally announced October 2014.
-
Physically transient photonics: random vs. distributed feedback lasing based on nanoimprinted DNA
Authors:
Andrea Camposeo,
Pompilio Del Carro,
Luana Persano,
Konrad Cyprych,
Adam Szukalski,
Lech Sznitko,
Jaroslaw Mysliwiec,
Dario Pisignano
Abstract:
The authors report on a room-temperature nanoimprinted, DNA-based distributed feedback (DFB) laser operating at 605 nm. The laser is made of a pure DNA host matrix doped with gain dyes. At high excitation densities, the emission of the untextured dye-doped DNA films is characterized by a broad emission peak with an overall linewidth of 12 nm and superimposed narrow peaks, characteristic of random…
▽ More
The authors report on a room-temperature nanoimprinted, DNA-based distributed feedback (DFB) laser operating at 605 nm. The laser is made of a pure DNA host matrix doped with gain dyes. At high excitation densities, the emission of the untextured dye-doped DNA films is characterized by a broad emission peak with an overall linewidth of 12 nm and superimposed narrow peaks, characteristic of random lasing. Moreover, direct patterning of the DNA films is demonstrated with a resolution down to 100 nm, enabling the realization of both surface-emitting and edge-emitting DFB lasers with a typical linewidth<0.3 nm. The resulting emission is polarized, with a ratio between the TE- and TM-polarized intensities exceeding 30. In addition, the nanopatterned devices dissolve in water within less than two minutes. These results demonstrate the possibility of realizing various physically transient nanophotonics and laser architectures, including random lasing and nanoimprinted devices, based on natural biopolymers.
△ Less
Submitted 7 November, 2014; v1 submitted 8 October, 2014;
originally announced October 2014.
-
A multiscale-multiphysics strategy for numerical modeling of thin piezoelectric sheets
Authors:
Claudio Maruccio,
Laura De Lorenzis,
Luana Persano,
Dario Pisignano
Abstract:
Flexible piezoelectric devices made of polymeric materials are widely used for micro- and nano-electro-mechanical systems. In particular, numerous recent applications concern energy harvesting. Due to the importance of computational modeling to understand the influence that microscale geometry and constitutive variables exert on the macroscopic behavior, a numerical approach is developed here for…
▽ More
Flexible piezoelectric devices made of polymeric materials are widely used for micro- and nano-electro-mechanical systems. In particular, numerous recent applications concern energy harvesting. Due to the importance of computational modeling to understand the influence that microscale geometry and constitutive variables exert on the macroscopic behavior, a numerical approach is developed here for multiscale and multiphysics modeling of piezoelectric materials made of aligned arrays of polymeric nanofibers. At the microscale, the representative volume element consists in piezoelectric polymeric nanofibers, assumed to feature a linear piezoelastic constitutive behavior and subjected to electromechanical contact constraints using the penalty method. To avoid the drawbacks associated with the non-smooth discretization of the master surface, a contact smoothing approach based on Bézier patches is extended to the multiphysics framework providing an improved continuity of the parameterization. The contact element contributions to the virtual work equations are included through suitable electric, mechanical and coupling potentials. From the solution of the micro-scale boundary value problem, a suitable scale transition procedure leads to the formulation of a macroscopic thin piezoelectric shell element.
△ Less
Submitted 3 October, 2014;
originally announced October 2014.
