-
How measurement protocols influence the dynamic J-V characteristics of perovskite solar cells: theory and experiment
Authors:
G. A. Nemnes,
Cristina Besleaga,
A. G. Tomulescu,
Alexandra Palici,
L. Pintilie,
A. Manolescu,
Ioana Pintilie
Abstract:
The dynamic effects observed in the J-V measurements represent one important hallmark in the behavior of the perovskite solar cells. Proper measurement protocols (MPs) should be employed for the experimental data reproducibility, in particular for a reliable evaluation of the power conversion efficiency (PCE), as well as for a meaningful characterization of the type and magnitude of the hysteresis…
▽ More
The dynamic effects observed in the J-V measurements represent one important hallmark in the behavior of the perovskite solar cells. Proper measurement protocols (MPs) should be employed for the experimental data reproducibility, in particular for a reliable evaluation of the power conversion efficiency (PCE), as well as for a meaningful characterization of the type and magnitude of the hysteresis. We discuss here several MPs by comparing the experimental J-V characteristics with simulated ones using the dynamic electrical model (DEM). Pre-poling conditions and bias scan rate can have a dramatic influence not only on the apparent solar cell performance, but also on the hysteretic phenomena. Under certain measurement conditions, a hysteresis-free behavior with relatively high PCEs may be observed, although the J-V characteristics may be far away from the stationary case. Furthermore, forward-reverse and reverse-forward bias scans show qualitatively different behaviors regarding the type of the hysteresis, normal and inverted, depending on the bias pre-poling. We emphasize here that correlated forward-reverse or reverse-forward bias scans are essential for a correct assessment of the dynamic hysteresis. In this context, we define a hysteresis index which consistently assigns the hysteresis type and magnitude. Our DEM simulations, supported by experimental data, provide further guidance for an efficient and accurate determination of the stationary J-V characteristics, showing that the type and magnitude of the dynamic hysteresis may be affected by unintentional pre-conditioning in typical experiments.
△ Less
Submitted 2 September, 2018; v1 submitted 1 March, 2018;
originally announced March 2018.
-
Normal and inverted hysteresis in perovskite solar cells
Authors:
George Alexandru Nemnes,
Cristina Besleaga,
Viorica Stancu,
Lucia Nicoleta Leonat,
Lucian Pintilie,
Kristinn Torfason,
Marjan Ilkov,
Andrei Manolescu,
Ioana Pintilie
Abstract:
Hysteretic effects are investigated in perovskite solar cells in the standard FTO/TiO$_2$/CH$_3$NH$_3$PbI$_{3-x}$Cl$_x$/spiro-OMeTAD/Au configuration. We report normal (NH) and inverted hysteresis (IH) in the J-V characteristics occurring for the same device structure, the behavior strictly depending on the pre-poling bias. NH typically appears at pre-poling biases larger than the open circuit bia…
▽ More
Hysteretic effects are investigated in perovskite solar cells in the standard FTO/TiO$_2$/CH$_3$NH$_3$PbI$_{3-x}$Cl$_x$/spiro-OMeTAD/Au configuration. We report normal (NH) and inverted hysteresis (IH) in the J-V characteristics occurring for the same device structure, the behavior strictly depending on the pre-poling bias. NH typically appears at pre-poling biases larger than the open circuit bias, while pronounced IH occurs for negative bias pre-poling. The transition from NH to IH is marked by a intermediate mixed hysteresis behavior characterized by a crossing point in the J-V characteristics. The measured J-V characteristics are explained quantitatively by the dynamic electrical model (DEM). Furthermore, the influence of the bias scan rate on the NH/IH hysteresis is discussed based on the time evolution of the non-linear polarization. Introducing a three step measurement protocol, which includes stabilization, pre-poling and measurement, we put forward the difficulties and possible solutions for a correct PCE evaluation.
△ Less
Submitted 25 March, 2017;
originally announced April 2017.
-
Dynamic electrical behavior of halide perovskite based solar cells
Authors:
George Alexandru Nemnes,
Cristina Besleaga,
Andrei Gabriel Tomulescu,
Ioana Pintilie,
Lucian Pintilie,
Kristinn Torfason,
Andrei Manolescu
Abstract:
A dynamic electrical model is introduced to investigate the hysteretic effects in the I-V characteristics of perovskite based solar cells. By making a simple ansatz for the polarization relaxation, our model is able to reproduce qualitatively and quantitatively detailed features of measured I-V characteristics. Pre-poling effects are discussed, pointing out the differences between initially over-…
▽ More
A dynamic electrical model is introduced to investigate the hysteretic effects in the I-V characteristics of perovskite based solar cells. By making a simple ansatz for the polarization relaxation, our model is able to reproduce qualitatively and quantitatively detailed features of measured I-V characteristics. Pre-poling effects are discussed, pointing out the differences between initially over- and under-polarized samples. In particular, the presence of the current over-shoot observed in the reverse characteristics is correlated with the solar cell pre-conditioning. Furthermore, the dynamic hysteresis is analyzed with respect to changing the bias scan rate, the obtained results being consistent with experimentally reported data: the hysteresis amplitude is maximum at intermediate scan rates, while at very slow and very fast ones it becomes negligible. The effects induced by different relaxation time scales are assessed. The proposed dynamic electrical model offers a comprehensive view of the solar cell operation, being a practical tool for future calibration of tentative microscopic descriptions.
△ Less
Submitted 15 September, 2016; v1 submitted 1 June, 2016;
originally announced June 2016.
-
Epitaxial thin films of the multiferroic double perovskite Bi2FeCrO6 grown on (100)-oriented SrTiO3 substrates: Growth, characterization, and optimization
Authors:
Riad Nechache,
Catalin Harnagea,
Louis-Philippe Carignan,
Olivier Gautreau,
Lucian Pintilie,
Mangala P. Singh,
David Menard,
Patrick Fournier,
Marin Alexe,
Alain Pignolet
Abstract:
The influence of the deposition pressure PO2 and substrate temperature TS during the growth of Bi2FeCrO6 thin films grown by pulsed laser deposition has been investigated. It is found that the high volatility of Bi makes the deposition very difficult and that the growth of pure Bi2FeCrO6 thin films on SrTiO3 substrates is possible only in a narrow deposition parameter window. We find that the pu…
▽ More
The influence of the deposition pressure PO2 and substrate temperature TS during the growth of Bi2FeCrO6 thin films grown by pulsed laser deposition has been investigated. It is found that the high volatility of Bi makes the deposition very difficult and that the growth of pure Bi2FeCrO6 thin films on SrTiO3 substrates is possible only in a narrow deposition parameter window. We find that the pure Bi2FeCrO6 phase is formed within a narrow window around an oxygen pressure PO2 =1.210-2 mbar and around a substrate temperature TS=680 degC. At lower temperature or higher pressure, Bi7.38Cr0.62O12+x_also called (b*Bi2O3)and Bi2Fe4O9 /Bi2(Fe,Cr)4O9+x phases are detected, while at lower pressure or higher temperature a (Fe,Cr)3O4 phase forms. Some of these secondary phases are not well known and have not been previously studied. We previously reported Fe/Cr cation ordering as the probable origin of the tenfold improvement in magnetization at saturation of our Bi2FeCrO6 film, compared to BiFeO3. Here, we address the effect of the degree of cationic ordering on the magnetic properties of the Bi2FeCrO6 single phase. Polarization measurements at room temperature reveal that our Bi2FeCrO6 films have excellent ferroelectric properties with ferroelectric hysteresis loops exhibiting a remanent polarization as high as 55-60 miroC/cm2 along the pseudocubic (001) direction.
△ Less
Submitted 13 March, 2009;
originally announced March 2009.
-
Intrinsic ferroelectric properties of strained tetragonal PbZr0.2Ti0.8O3 obtained on layer-by-layer grown, defect-free single crystalline films
Authors:
Ionela Vrejoiu,
Gwenael Le Rhun,
Lucian Pintilie,
Dietrich Hesse,
Marin Alexe,
Ulrich Goesele
Abstract:
PbZrxTi1-xO3 (PZT) is one of the technologically most important ferroelectric materials. Bulk single-domain single crystals of PZT have never been synthesized for a significant compositional range across the solid-solution phase diagram. This leaves the fundamental properties of PZT under debate. Synthesis of defect-free single crystalline films enables us to unambiguously determine the intrinsi…
▽ More
PbZrxTi1-xO3 (PZT) is one of the technologically most important ferroelectric materials. Bulk single-domain single crystals of PZT have never been synthesized for a significant compositional range across the solid-solution phase diagram. This leaves the fundamental properties of PZT under debate. Synthesis of defect-free single crystalline films enables us to unambiguously determine the intrinsic quantities that describe ferroelectric materials, such as spontaneous polarization and dielectric constant. Defect-free single crystalline, strained PbZr0.2Ti0.8O3 thin films were grown by pulsed-laser deposition (PLD) onto vicinal SrTiO3 (001) single crystal substrates. Single crystalline SrRuO3 films fabricated by PLD were employed as bottom electrode. The PZT films have square shape hysteresis loops and remnant polarization values of up to Pr= 110 micro C/cm2, which is considerably higher than the theoretical value predicted for (unstrained) bulk single crystalline PZT of the investigated composition. The films have a dielectric constant eps33= 90 and a piezoelectric coefficient d33= 50 pm/V.
△ Less
Submitted 16 January, 2006;
originally announced January 2006.
-
Metal-Ferroelectric-Metal heterostructures with Schottky contacts I. Influence of the ferroelectric properties
Authors:
L. Pintilie,
M. Alexe
Abstract:
A model for Metal-Ferroelectric-Metal structures with Schottky contacts is proposed. The model adapts the general theories of metal-semiconductor rectifying contacts for the particular case of metal-ferroelectric contact by introducing: the ferroelectric polarization as a sheet of surface charge located at a finite distance from the electrode interface; a deep trapping level of high concentratio…
▽ More
A model for Metal-Ferroelectric-Metal structures with Schottky contacts is proposed. The model adapts the general theories of metal-semiconductor rectifying contacts for the particular case of metal-ferroelectric contact by introducing: the ferroelectric polarization as a sheet of surface charge located at a finite distance from the electrode interface; a deep trapping level of high concentration; the static and dynamic values of the dielectric constant. Consequences of the proposed model on relevant quantities of the Schottky contact such as built-in voltage, charge density and depletion width, as well as on the interpretation of the current-voltage and capacitance-voltage characteristics are discussed in detail.
△ Less
Submitted 24 August, 2005;
originally announced August 2005.
