-
Anionic disorder and its impact on the surface electronic structure of oxynitride photoactive semiconductors
Authors:
Anna Hartl,
Ján Minár,
Procopios Constantinou,
Vladimir Roddatis,
Fatima Alarab,
Arnold M. Müller,
Christof Vockenhuber,
Thorsten Schmitt,
Daniele Pergolesi,
Thomas Lippert Vladimir N. Strocov,
Nick A. Shepelin
Abstract:
The conversion of solar energy into chemical energy, stored in the form of hydrogen, bears enormous potential as a sustainable fuel for powering emerging technologies. Photoactive oxynitrides are promising materials for splitting water into molecular oxygen and hydrogen. However, one of the issues limiting widespread commercial use of oxynitrides is the degradation during operation. While recent s…
▽ More
The conversion of solar energy into chemical energy, stored in the form of hydrogen, bears enormous potential as a sustainable fuel for powering emerging technologies. Photoactive oxynitrides are promising materials for splitting water into molecular oxygen and hydrogen. However, one of the issues limiting widespread commercial use of oxynitrides is the degradation during operation. While recent studies have shown the loss of nitrogen, its relation to the reduced efficiency has not been directly and systematically addressed with experiments. In this study, we demonstrate the impact of the anionic stoichiometry of BaTaO$_x$N$_y$ on its electronic structure and functional properties. Through experimental ion scattering, electron microscopy, and photoelectron spectroscopy investigations, we determine the anionic composition ranging from the bulk towards the surface of BaTaO$_x$N$_y$ thin films. This further serves as input for band structure computations modeling the substitutional disorder of the anion sites. Combining our experimental and computational approaches, we reveal the depth-dependent elemental composition of oxynitride films, resulting in downward band bending and the loss of semiconducting character towards the surface. Extending beyond idealized systems, we demonstrate the relation between the electronic properties of real oxynitride photoanodes and their performance, providing guidelines for engineering highly efficient photoelectrodes and photocatalysts for clean hydrogen production.
△ Less
Submitted 18 September, 2024;
originally announced September 2024.
-
Li4-xGe1-xPxO4 a potential solid-state electrolyte for all-oxide microbatteries
Authors:
E. Gilardi,
G. Materzanini,
L. Kahle,
M. Doebeli,
S. Lacey,
X. Cheng,
N. Marzari,
D. Pergolesi,
A. Hintennach,
T. Lippert
Abstract:
Solid-state electrolytes for Li-ion batteries are attracting growing interest as they allow building safer batteries, also using lithium metal anodes. Here we studied a compound in the lithium superionic conductor (LISICON) family, i.e. Li4-xGe1-xPxO4 (LGPO). Thin films were deposited via pulsed laser deposition and their electrical properties were compared with ceramic pellets. A detailed charact…
▽ More
Solid-state electrolytes for Li-ion batteries are attracting growing interest as they allow building safer batteries, also using lithium metal anodes. Here we studied a compound in the lithium superionic conductor (LISICON) family, i.e. Li4-xGe1-xPxO4 (LGPO). Thin films were deposited via pulsed laser deposition and their electrical properties were compared with ceramic pellets. A detailed characterization of the micro structure shows that thin films can be deposited fully crystalline at higher temperatures but also partially amorphous at room temperature. The conductivity is not strongly influenced by the presence of grain boundaries, exposure to air or lithium deficiencies. First-principles molecular dynamics simulations were employed to calculate the lithium ion diffusion profile and the conductivity at various temperatures of the ideal LGPO crystal. Simulations gives the upper limit of conductivity for a defect free crystal, which is in the range of 10-2 S cm-1 at 300 deg. The ease of thin film fabrication, the room-temperature Li-ion conductivity in the range of a few microS cm-1 make LGPO a very appealing electrolyte material for thin film all-solid-state all-oxide microbatteries.
△ Less
Submitted 6 October, 2020;
originally announced October 2020.
-
Energy conversion processes with perovskite-type materials
Authors:
Davide Ferri,
Daniele Pergolesi,
Emiliana Fabbri
Abstract:
Mixed oxides derived from the perovskite structure by combination of A- and B-site elements and by partial substitution of oxygen provide an immense playground of physico-chemical properties. Here, we account for own research conducted at the Paul Scherrer Institute on perovskite-type oxides and oxynitrides used in electrochemical, photo(electro)chemical and catalytic processes aiming at facing en…
▽ More
Mixed oxides derived from the perovskite structure by combination of A- and B-site elements and by partial substitution of oxygen provide an immense playground of physico-chemical properties. Here, we account for own research conducted at the Paul Scherrer Institute on perovskite-type oxides and oxynitrides used in electrochemical, photo(electro)chemical and catalytic processes aiming at facing energy relevant issues.
△ Less
Submitted 15 November, 2019;
originally announced November 2019.
-
Yttrium Tantalum Oxynitride Multiphases as Photoanodes for Water Oxidation
Authors:
Wenping Si,
Zahra Pourmand Tehrani,
Fatima Haydous,
Nicola Marzari,
Ivano E. Castelli,
Daniele Pergolesi,
Thomas Lippert
Abstract:
Perovskite yttrium tantalum oxynitride is theoretically proposed as a promising semiconductor for solar water splitting because of the predicted bandgap and energy positions of band edges. In experiment, however, we show here that depending on processing parameters, yttrium tantalum oxynitrides exist in multiphases, including the desired perovskite YTaON2, defect fluorite YTa(O,N,o)4, and N-doped…
▽ More
Perovskite yttrium tantalum oxynitride is theoretically proposed as a promising semiconductor for solar water splitting because of the predicted bandgap and energy positions of band edges. In experiment, however, we show here that depending on processing parameters, yttrium tantalum oxynitrides exist in multiphases, including the desired perovskite YTaON2, defect fluorite YTa(O,N,o)4, and N-doped YTaO4. These multiphases have bandgaps ranging between 2.13 and 2.31 eV, all responsive to visible light. The N-doped YTaO4, perovskite main phase, and fluorite main phase derived from crystalline fergusonite oxide precursors exhibit interesting photoelectrochemical performances for water oxidation, while the defect fluorite derived from low crystallized scheelite-type oxide precursors show negligible activity. Preliminarily measurements show that loading IrOx cocatalyst on N-doped YTaO4 significantly improves its photoelectrochemical performance encouraging further studies to optimize this new material for solar fuel production.
△ Less
Submitted 15 November, 2019;
originally announced November 2019.
-
Suppressed charge recombination in hematite photoanode via protonation and annealing
Authors:
Wenping Si,
Fatima Haydous,
Ugljesa Babic,
Daniele Pergolesi,
Thomas Lippert
Abstract:
Hematite as promising photoanode for solar water splitting suffers from severe bulk and surface charge recombination. This work describes that a protonation-annealing treatment can effectively suppress both bulk and surface charge recombination in hematite. Protons/electrons are electrochemically incorporated into hematite under 0.2 VRHE followed by annealing at 120 oC. The photocurrent density in…
▽ More
Hematite as promising photoanode for solar water splitting suffers from severe bulk and surface charge recombination. This work describes that a protonation-annealing treatment can effectively suppress both bulk and surface charge recombination in hematite. Protons/electrons are electrochemically incorporated into hematite under 0.2 VRHE followed by annealing at 120 oC. The photocurrent density increases from ~0.9 mA cm-2 to 1.8 mA cm-2 at 1.23 VRHE under 1 sun, and further to 2.7 mA cm-2 after loading cobalt phosphate, stabilizing at round 2.4 mA cm-2. A cathodic shift of the onset potential of photocurrent is also observed. H2O2 oxidation, impedance spectroscopy and Mott-Schottky measurements show that the protonation suppresses bulk recombination and enhances donor density, but introducing more surface recombination. The annealing reduces surface recombination, while preserving relatively high bulk charge separation efficiency. Different from previous reports on the electrochemically reduced hematite, this work demonstrates that the performance improvement should be ascribed to the proton incorporation instead of the formation of Fe3O4 or metal Fe. This facile treatment by protonation and annealing could be applied in other semiconductors to promote the development of high performing photoelectrodes.
△ Less
Submitted 15 November, 2019;
originally announced November 2019.
-
The solid-state Li-ion conductor Li$_7$TaO$_6$: A combined computational and experimental study
Authors:
Leonid Kahle,
Xi Cheng,
Tobias Binninger,
Steven David Lacey,
Aris Marcolongo,
Federico Zipoli,
Elisa Gilardi,
Claire Villevieille,
Mario El Kazzi,
Nicola Marzari,
Daniele Pergolesi
Abstract:
We study the oxo-hexametallate Li$_7$TaO$_6$ with first-principles and classical molecular dynamics simulations, obtaining a low activation barrier for diffusion of $\sim$0.29 eV and a high ionic conductivity of $5.7 \times 10^{-4}$ S cm$^{-1}$ at room temperature (300 K). We find evidence for a wide electrochemical stability window from both calculations and experiments, suggesting its viable use…
▽ More
We study the oxo-hexametallate Li$_7$TaO$_6$ with first-principles and classical molecular dynamics simulations, obtaining a low activation barrier for diffusion of $\sim$0.29 eV and a high ionic conductivity of $5.7 \times 10^{-4}$ S cm$^{-1}$ at room temperature (300 K). We find evidence for a wide electrochemical stability window from both calculations and experiments, suggesting its viable use as a solid-state electrolyte in next-generation solid-state Li-ion batteries. To assess its applicability in an electrochemical energy storage system, we performed electrochemical impedance spectroscopy measurements on multicrystalline pellets, finding substantial ionic conductivity, if below the values predicted from simulation. We further elucidate the relationship between synthesis conditions and the observed ionic conductivity using X-ray diffraction, inductively coupled plasma optical emission spectrometry, and X-ray photoelectron spectroscopy, and study the effects of Zr and Mo doping.
△ Less
Submitted 24 October, 2019;
originally announced October 2019.
-
Real-time monitoring of stress evolution during thin film growth by in situ substrate curvature measurement
Authors:
Elisa Gilardi,
Aline Fluri,
Thomas Lippert,
Daniele Pergolesi
Abstract:
Strain engineering is the art of inducing controlled lattice distortions in a material to modify specific physicochemical properties. Strain engineering is applied for basic fundamental studies of physics and chemistry of solids but also for device fabrication through the development of materials with new functionalities. Thin films are one of the most important tools for strain engineering. Thin…
▽ More
Strain engineering is the art of inducing controlled lattice distortions in a material to modify specific physicochemical properties. Strain engineering is applied for basic fundamental studies of physics and chemistry of solids but also for device fabrication through the development of materials with new functionalities. Thin films are one of the most important tools for strain engineering. Thin films can in fact develop large strain due to the crystalline constrains at the interface with the substrate and/or as the result of specific morphological features that can be selected by an appropriate tuning of the deposition parameters. Within this context, the in situ measurement of the substrate curvature is a powerful diagnostic tool allowing a real time monitoring of the stress state of the growing film. This manuscript reviews a few recent applications of this technique and presents new measurements that point out the great potentials of the substrate curvature measurement in strain engineering. Our study also shows how, due to the high sensitivity of the technique, the correct interpretation of the results can be in certain cases not trivial and require complementary characterizations and an accurate knowledge of the physicochemical properties of the materials under investigation.
△ Less
Submitted 13 May, 2019;
originally announced May 2019.
-
Interface Effects on the Ionic Conductivity of Doped Ceria / Yttria-stabilized Zirconia Heterostructures
Authors:
Daniele Pergolesi,
Elisa Gilardi,
Emiliana Fabbri,
Vladimir Roddatis,
George F. Harrington,
Thomas Lippert,
John A. Kilner,
Enrico Traversa
Abstract:
Multilayered heterostructures of Ce0.85Sm0.15O2-delta and Y0.16Zr0.92O2-delta of a high crystallographic quality were fabricated on (001) - oriented MgO single crystal substrates. Keeping the total thickness of the heterostructures constant, the number of ceria-zirconia bilayers was increased while reducing the thickness of each layer. At each interface Ce was found primarily in the reduced, 3+ ox…
▽ More
Multilayered heterostructures of Ce0.85Sm0.15O2-delta and Y0.16Zr0.92O2-delta of a high crystallographic quality were fabricated on (001) - oriented MgO single crystal substrates. Keeping the total thickness of the heterostructures constant, the number of ceria-zirconia bilayers was increased while reducing the thickness of each layer. At each interface Ce was found primarily in the reduced, 3+ oxidation state in a layer extending about 2 nm from the interface. Concurrently, the conductivity decreased as the thickness of the layers was reduced suggesting a progressive confinement of the charge transport along the YSZ layers. The comparative analysis of the in-plane electrical characterization suggests that the contribution to the total electrical conductivity of these interfacial regions is negligible. For the smallest layer thickness of 2 nm the doped ceria layers are electrically insulating and the ionic transport only occurs through the zirconia layers. This is explained in terms of a reduced mobility of the oxygen vacancies in the highly reduced ceria.
△ Less
Submitted 13 May, 2019;
originally announced May 2019.
-
Anisotropic Proton and Oxygen Ion Conductivity in Epitaxial Ba2In2O5 Thin Films
Authors:
Aline Fluri,
Maths Karlsson,
Marco Bettinelli,
Ivano E. Castelli,
Thomas Lippert,
Daniele Pergolesi
Abstract:
Solid oxide oxygen ion and proton conductors are a highly important class of materials for renewable energy conversion devices like solid oxide fuel cells. Ba2In2O5 (BIO) exhibits both oxygen ion and proton conduction, in dry and humid environment, respectively. In dry environment, the brownmillerite crystal structure of BIO exhibits an ordered oxygen ion sublattice, which has been speculated to r…
▽ More
Solid oxide oxygen ion and proton conductors are a highly important class of materials for renewable energy conversion devices like solid oxide fuel cells. Ba2In2O5 (BIO) exhibits both oxygen ion and proton conduction, in dry and humid environment, respectively. In dry environment, the brownmillerite crystal structure of BIO exhibits an ordered oxygen ion sublattice, which has been speculated to result in anisotropic oxygen ion conduction. The hydrated structure of BIO, however, resembles a perovskite and the protons in it were predicted to be ordered in layers. To complement the significant theoretical and experimental efforts recently reported on the potentially anisotropic conductive properties in BIO, we measure here the proton and oxygen ion conductivity along different crystallographic directions. Using epitaxial thin films with different crystallographic orientations the charge transport for both charge carriers is shown to be anisotropic. The anisotropy of the oxygen ion conduction can indeed be explained through the layered structure of the oxygen sublattice in brownmillerite BIO. The anisotropic proton conduction however, further supports the suggested ordering of the protonic defects in the material. The differences in proton conduction along different crystallographic directions attributed to proton ordering in BIO are of a similar extent as those observed along different crystallographic directions in materials where proton ordering is not present but where protons find preferential conduction pathways through chain-like or layered structures.
△ Less
Submitted 3 May, 2019;
originally announced May 2019.
-
X-ray Absorption Linear Dichroism at the Ti K-edge of TiO2 anatase single crystals
Authors:
T. C. Rossi,
D. Grolimund,
M. Nachtegaal,
O. Cannelli,
G. F. Mancini,
C. Bacellar,
D. Kinschel,
J. R. Rouxel,
N. Ohannessian,
D. Pergolesi,
T. Lippert,
M. Chergui
Abstract:
Anatase TiO2 (a-TiO2) exhibits a strong X-ray absorption linear dichroism with the X-ray incidence angle in the pre-edge, the XANES and the EXAFS at the titanium K-edge. In the pre-edge region the behaviour of the A1-A3 and B peaks, originating from the 1s-3d transitions, is due to the strong $p$-orbital polarization and strong $p-d$ orbital mixing. An unambiguous assignment of the pre-edge peak t…
▽ More
Anatase TiO2 (a-TiO2) exhibits a strong X-ray absorption linear dichroism with the X-ray incidence angle in the pre-edge, the XANES and the EXAFS at the titanium K-edge. In the pre-edge region the behaviour of the A1-A3 and B peaks, originating from the 1s-3d transitions, is due to the strong $p$-orbital polarization and strong $p-d$ orbital mixing. An unambiguous assignment of the pre-edge peak transitions is made in the monoelectronic approximation with the support of ab initio finite difference method calculations and spherical tensor analysis in quantitative agreement with the experiment. It is found that A1 is mostly an on-site 3d-4p hybridized transition, while peaks A3 and B are non-local transitions, with A3 being mostly dipolar and influence by the 3d-4p intersite hybridization, while B is due to interactions at longer range. Finally, peak A2 which was previously assigned to a transition involving pentacoordinated titanium atoms exhibits a quadrupolar angular evolution with incidence angle. These results pave the way to the use of the pre-edge peaks at the K-edge of a-TiO2 to characterize the electronic structure of related materials and in the field of ultrafast XAS where the linear dichroism can be used to compare the photophysics along different axes.
△ Less
Submitted 27 May, 2025; v1 submitted 8 March, 2019;
originally announced March 2019.
-
Determination of conduction and valence band electronic structure of LaTiOxNy thin film
Authors:
Markus Pichler,
Jakub Szlachetko,
Ivano E. Castelli,
Nicola Marzari,
Max Döbeli,
Alexander Wokaun,
Daniele Pergolesi,
Thomas Lippert
Abstract:
The nitrogen substitution into the oxygen sites of several oxide materials leads to a reduction of the band gap to the visible light energy range, which makes these oxynitride semiconductors potential photocatalysts for efficient solar water splitting. Oxynitrides typically show a different crystal structure compare to the pristine oxide material. Since the band gap is correlated to both the chemi…
▽ More
The nitrogen substitution into the oxygen sites of several oxide materials leads to a reduction of the band gap to the visible light energy range, which makes these oxynitride semiconductors potential photocatalysts for efficient solar water splitting. Oxynitrides typically show a different crystal structure compare to the pristine oxide material. Since the band gap is correlated to both the chemical composition and the crystal structure, it is not trivial to distinguish what modifications of the electronic structure induced by the nitrogen substitution are related to compositional and/or structural effects. Here, X-ray emission and absorption spectroscopy is used to investigate the electronic structures of orthorhombic perovskite LaTiOxNy thin films in comparison with films of the pristine oxide LaTiOx with similar orthorhombic structure and cationic oxidation state. Experiment and theory show the expected upward shift in energy of the valence band maximum that reduces the band gap as a consequence of the nitrogen incorporation. But this study also shows that the conduction band minimum, typically considered almost unaffected by the nitrogen substitution, undergoes a significant downward shift in energy. For a rational design of oxynitride photocatalysts the observed changes of both the unoccupied and occupied electronic states have to be taken into account to justify the total band gap narrowing induced by the nitrogen incorporation.
△ Less
Submitted 11 February, 2019;
originally announced February 2019.
-
LaTiOxNy thin film model systems for photocatalytic water splitting: physicochemical evolution of the solid-liquid interface and the role of the crystallographic orientation
Authors:
Markus Pichler,
Wenping Si,
Fatima Haydous,
Helena Téllez,
John Druce,
Emiliana Fabbri,
Mario El Kazzi,
Max Döbeli,
Silviya Ninova,
Ulrich Aschauer,
Alexander Wokaun,
Daniele Pergolesi,
Thomas Lippert
Abstract:
The size of the band gap and the energy position of the band edges make several oxynitride semiconductors promising candidates for efficient hydrogen and oxygen production under solar light illumination. The intense research efforts dedicated to oxynitride materials have unveiled the majority of their most important properties. However, two crucial aspects have received much less attention. One is…
▽ More
The size of the band gap and the energy position of the band edges make several oxynitride semiconductors promising candidates for efficient hydrogen and oxygen production under solar light illumination. The intense research efforts dedicated to oxynitride materials have unveiled the majority of their most important properties. However, two crucial aspects have received much less attention. One is the critical issue of the compositional/structural surface modifications occurring during operation and how these affect the photoelectrochemical performance. The second concerns the relation between the electrochemical response and the crystallographic surface orientation of the oxynitride semiconductor. These are indeed topics of fundamental importance since it is exactly at the surface where the visible light-driven electrochemical reaction takes place. In contrast to conventional powder samples, thin films represent the best model system for these investigations. This study reviews current state-of-the-art of oxynitride thin film fabrication and characterization before focusing on LaTiO2N selected as representative photocatalyst. We report the investigation of the initial physicochemical evolution of the surface. Then we show that, after stabilization, the absorbed photon-to-current conversion efficiency of epitaxial thin films can differ by about 50% for different crystallographic surface orientations and be up to 5 times larger than for polycrystalline samples.
△ Less
Submitted 11 February, 2019;
originally announced February 2019.
