-
Demonstration of Advanced Timing Schemes in Time-Resolved X-ray Diffraction Measurements
Authors:
Daniel Schmidt,
David. v. Stetten,
Michael Agthe,
Arwen R. Pearson,
Goddfrey . S. Beddard,
Briony A. Yorke,
Friedjof Tellkamp,
Peter Gaal
Abstract:
We present time-resolved X-ray diffraction measurements using advanced timing schemes that provide high temporal resolution while also maintaining a high flux in the X-ray probe beam. The method employs patterned probe pulse sequences that are generated with the WaveGate solid-state pulse picker. We demonstrate the feasibility of our method at two different beamlines on millisecond and microsecond…
▽ More
We present time-resolved X-ray diffraction measurements using advanced timing schemes that provide high temporal resolution while also maintaining a high flux in the X-ray probe beam. The method employs patterned probe pulse sequences that are generated with the WaveGate solid-state pulse picker. We demonstrate the feasibility of our method at two different beamlines on millisecond and microsecond timescales.
△ Less
Submitted 25 August, 2025; v1 submitted 13 May, 2025;
originally announced May 2025.
-
An intermediate morphology in the patterning of the crystalline Ge(001) surface induced by ion irradiation
Authors:
Denise J. Erb,
Daniel A. Pearson,
Tomáš Škereň,
Martin Engler,
R. Mark Bradley,
Stefan Facsko
Abstract:
We investigate the morphologies of the Ge(001) surface that are produced by bombardment with a normally incident, broad argon ion beam at sample temperatures above the recrystallization temperature. Two previously-observed kinds of topographies are seen, i.e., patterns consisting of upright and inverted rectangular pyramids, as well as patterns composed of shallow, isotropic basins. In addition, w…
▽ More
We investigate the morphologies of the Ge(001) surface that are produced by bombardment with a normally incident, broad argon ion beam at sample temperatures above the recrystallization temperature. Two previously-observed kinds of topographies are seen, i.e., patterns consisting of upright and inverted rectangular pyramids, as well as patterns composed of shallow, isotropic basins. In addition, we observe the formation of an unexpected third type of pattern for intermediate values of the temperature, ion energy and ion flux. In this type of intermediate morphology, isolated peaks with rectangular cross sections stand above a landscape of shallow, rounded basins. We also extend past theoretical work to include a second order correction term that comes from the curvature dependence of the sputter yield. For a range of parameter values, the resulting continuum model of the surface dynamics produces patterns that are remarkably similar to the intermediate morphologies we observe in our experiments. The formation of the isolated peaks is the result of a term that is not ordinarily included in the equation of motion, a second order correction to the curvature dependence of the sputter yield.
△ Less
Submitted 15 December, 2023; v1 submitted 13 April, 2023;
originally announced April 2023.
-
Sequentially Deposited versus Conventional Nonfullerene Organic Solar Cells: Interfacial Trap States, Vertical Stratification, and Exciton Dissociation
Authors:
Jiangbin Zhang,
Moritz H. Futscher,
Vincent Lami,
Felix U. Kosasih,
Changsoon Cho,
Qinying Gu,
Aditya Sadhanala,
Andrew J. Pearson,
Bin Kan,
Giorgio Divitini,
Xiangjian Wan,
Daniel Credgington,
Neil C. Greenham,
Yongsheng Chen,
Caterina Ducati,
Bruno Ehrler,
Yana Vaynzof,
Richard H. Friend,
Artem A. Bakulin
Abstract:
Bulk-heterojunction (BHJ) non-fullerene organic solar cells prepared from sequentially deposited donor and acceptor layers (sq-BHJ) have recently been promising to be highly efficient, environmentally friendly, and compatible with large area and roll-to-toll fabrication. However, the related photophysics at donor-acceptor interface and the vertical heterogeneity of donor-acceptor distribution, cri…
▽ More
Bulk-heterojunction (BHJ) non-fullerene organic solar cells prepared from sequentially deposited donor and acceptor layers (sq-BHJ) have recently been promising to be highly efficient, environmentally friendly, and compatible with large area and roll-to-toll fabrication. However, the related photophysics at donor-acceptor interface and the vertical heterogeneity of donor-acceptor distribution, critical for exciton dissociation and device performance, are largely unexplored. Herein, steady-state and time-resolved optical and electrical techniques are employed to characterize the interfacial trap states. Correlation with the luminescent efficiency of interfacial states and its non-radiative recombination, interfacial trap states are characterized to be about 50% more populated in the sq-BHJ than as-cast BHJ (c-BHJ), which probably limits the device voltage output. Cross-sectional energy-dispersive X-ray spectroscopy and ultraviolet photoemission spectroscopy depth profiling directly vizualize the donor-acceptor vertical stratification with a precision of 1-2 nm. From the proposed "needle" model, the high exciton dissociation efficiency is rationalized. Our study highlights the promise of sequential deposition to fabricate efficient solar cells, and points towards improving the voltage output and overall device performance via eliminating interfacial trap states.
△ Less
Submitted 30 July, 2020;
originally announced July 2020.
-
Measuring the thermodynamic cost of timekeeping
Authors:
A. N. Pearson,
Y. Guryanova,
P. Erker,
E. A. Laird,
G. A. D. Briggs,
M. Huber,
N. Ares
Abstract:
All clocks, in some form or another, use the evolution of nature towards higher entropy states to quantify the passage of time. Due to the statistical nature of the second law and corresponding entropy flows, fluctuations fundamentally limit the performance of any clock. This suggests a deep relation between the increase in entropy and the quality of clock ticks. Indeed, minimal models for autonom…
▽ More
All clocks, in some form or another, use the evolution of nature towards higher entropy states to quantify the passage of time. Due to the statistical nature of the second law and corresponding entropy flows, fluctuations fundamentally limit the performance of any clock. This suggests a deep relation between the increase in entropy and the quality of clock ticks. Indeed, minimal models for autonomous clocks in the quantum realm revealed that a linear relation can be derived, where for a limited regime every bit of entropy linearly increases the accuracy of quantum clocks. But can such a linear relation persist as we move towards a more classical system? We answer this in the affirmative by presenting the first experimental investigation of this thermodynamic relation in a nanoscale clock. We stochastically drive a nanometer-thick membrane and read out its displacement with a radio-frequency cavity, allowing us to identify the ticks of a clock. We show theoretically that the maximum possible accuracy for this classical clock is proportional to the entropy created per tick, similar to the known limit for a weakly coupled quantum clock but with a different proportionality constant. We measure both the accuracy and the entropy. Once non-thermal noise is accounted for, we find that there is a linear relation between accuracy and entropy and that the clock operates within an order of magnitude of the theoretical bound.
△ Less
Submitted 15 June, 2020;
originally announced June 2020.
-
Analog Errors in Quantum Annealing: Doom and Hope
Authors:
Adam Pearson,
Anurag Mishra,
Itay Hen,
Daniel Lidar
Abstract:
Quantum annealing has the potential to provide a speedup over classical algorithms in solving optimization problems. Just as for any other quantum device, suppressing Hamiltonian control errors will be necessary before quantum annealers can achieve speedups. Such analog control errors are known to lead to $J$-chaos, wherein the probability of obtaining the optimal solution, encoded as the ground s…
▽ More
Quantum annealing has the potential to provide a speedup over classical algorithms in solving optimization problems. Just as for any other quantum device, suppressing Hamiltonian control errors will be necessary before quantum annealers can achieve speedups. Such analog control errors are known to lead to $J$-chaos, wherein the probability of obtaining the optimal solution, encoded as the ground state of the intended Hamiltonian, varies widely depending on the control error. Here, we show that $J$-chaos causes a catastrophic failure of quantum annealing, in that the scaling of the time-to-solution metric becomes worse than that of a deterministic (exhaustive) classical solver. We demonstrate this empirically using random Ising spin glass problems run on the two latest generations of the D-Wave quantum annealers. We then proceed to show that this doomsday scenario can be mitigated using a simple error suppression and correction scheme known as quantum annealing correction (QAC). By using QAC, the time-to-solution scaling of the same D-Wave devices is improved to below that of the classical upper bound, thus restoring hope in the speedup prospects of quantum annealing.
△ Less
Submitted 29 July, 2019;
originally announced July 2019.
-
Radio-frequency optomechanical characterization of a silicon nitride drum
Authors:
A. N. Pearson,
K. E. Khosla,
M. Mergenthaler,
G. A. D. Briggs,
E. A. Laird,
N. Ares
Abstract:
On-chip actuation and readout of mechanical motion is key to characterize mechanical resonators and exploit them for new applications. We capacitively couple a silicon nitride membrane to an off resonant radio-frequency cavity formed by a lumped element circuit. Despite a low cavity quality factor (Q$_\mathrm{E}\approx$ 7.4) and off resonant, room temperature operation, we are able to parametrize…
▽ More
On-chip actuation and readout of mechanical motion is key to characterize mechanical resonators and exploit them for new applications. We capacitively couple a silicon nitride membrane to an off resonant radio-frequency cavity formed by a lumped element circuit. Despite a low cavity quality factor (Q$_\mathrm{E}\approx$ 7.4) and off resonant, room temperature operation, we are able to parametrize several mechanical modes and estimate their optomechanical coupling strengths. This enables real-time measurements of the membrane's driven motion and fast characterization without requiring a superconducting cavity, thereby eliminating the need for cryogenic cooling. Finally, we observe optomechanically induced transparency and absorption, crucial for a number of applications including sensitive metrology, ground state cooling of mechanical motion and slowing of light.
△ Less
Submitted 20 July, 2020; v1 submitted 4 March, 2019;
originally announced March 2019.
-
Degradation Kinetics of Inverted Perovskite Solar Cells
Authors:
Mejd Alsari,
Andrew J. Pearson,
Jacob Tse-Wei Wang,
Zhiping Wang,
Augusto Montisci,
Neil C. Greenham,
Henry J. Snaith,
Samuele Lilliu,
Richard H. Friend
Abstract:
We explore the degradation behaviour under continuous illumination and direct oxygen exposure of inverted unencapsulated formamidinium(FA)0.83Cs0.17Pb(I0.8Br0.2)3, CH3NH3PbI3, and CH3NH3PbI3-xClx perovskite solar cells. We continuously test the devices in-situ and in-operando with current-voltage sweeps, transient photocurrent, and transient photovoltage measurements, and find that degradation in…
▽ More
We explore the degradation behaviour under continuous illumination and direct oxygen exposure of inverted unencapsulated formamidinium(FA)0.83Cs0.17Pb(I0.8Br0.2)3, CH3NH3PbI3, and CH3NH3PbI3-xClx perovskite solar cells. We continuously test the devices in-situ and in-operando with current-voltage sweeps, transient photocurrent, and transient photovoltage measurements, and find that degradation in the CH3NH3PbI3-xClx solar cells due to oxygen exposure occurs over shorter timescales than FA0.83Cs0.17Pb(I0.8Br0.2)3 mixed-cation devices. We attribute these oxygen-induced losses in the power conversion efficiencies to the formation of electron traps within the perovskite photoactive layer. Our results highlight that the formamidinium-caesium mixed-cation perovskites are much less sensitive to oxygen-induced degradation than the methylammonium-based perovskite cells, and that further improvements in perovskite solar cell stability should focus on the mitigation of trap generation during ageing.
△ Less
Submitted 22 January, 2018;
originally announced January 2018.
-
Maximising and Stabilising Luminescence in Metal Halide Perovskite Device Structures
Authors:
Mojtaba Abdi-Jalebi,
Zahra Andaji-Garmaroudi,
Stefania Cacovich,
Camille Stavrakas,
Bertrand Philippe,
Johannes M. Richter,
Mejd Alsari,
Edward P. Booker,
Eline M. Hutter,
Andrew J. Pearson,
Samuele Lilliu,
Tom J Savenije,
Håkan Rensmo,
Giorgio Divitini,
Caterina Ducati,
Richard H. Friend,
Samuel D. Stranks
Abstract:
Metal halide perovskites are attracting tremendous interest for a variety of optoelectronic applications. The ability to tune the perovskite bandgap by tweaking the chemical compositions opens up new applications as coloured emitters and as components of tandem photovoltaics. Nevertheless, non-radiative losses are still limiting performance, with luminescence yields in state-of-the-art perovskite…
▽ More
Metal halide perovskites are attracting tremendous interest for a variety of optoelectronic applications. The ability to tune the perovskite bandgap by tweaking the chemical compositions opens up new applications as coloured emitters and as components of tandem photovoltaics. Nevertheless, non-radiative losses are still limiting performance, with luminescence yields in state-of-the-art perovskite solar cells still far from 100% under solar illumination conditions. Furthermore, in mixed halide perovskite systems designed for continuous bandgap tunability (bandgaps ~1.7-1.9 eV), photo-induced ion segregation leads to bandgap instabilities. Here, we substantially mitigate both non-radiative losses and photo-induced ion migration in perovskite structures by decorating the surfaces and grain boundaries with passivating potassium-halide interlayers. We demonstrate external photo-luminescence quantum yields of 66%, translating to internal yields exceeding 95%. The high luminescence yields are achieved while maintaining high mobilities over 40 cm2V-1s-1, giving the elusive combination of both high luminescence and excellent charge transport. We find that the external luminescence yield when interfaced with electrodes in a solar cell device stack, a quantity that must be maximized to approach the efficiency limits, remains as high as 15%, indicating very clean interfaces. We also demonstrate the inhibition of photo-induced ion migration processes across a wide range of mixed halide perovskite bandgaps that otherwise show bandgap instabilities. We validate these results in full operating solar cells, highlighting the importance of stabilising luminescence in device structures. Our work represents a critical breakthrough in the construction of tunable halide perovskite films and interfaces that can approach the efficiency limits in tandem solar cells and coloured LEDs.
△ Less
Submitted 13 December, 2017;
originally announced December 2017.
-
Thickening of viscoelastic flow in a model porous medium
Authors:
E. J. Hemingway,
A. Clarke,
J. R. A. Pearson,
S. M. Fielding
Abstract:
We study numerically two-dimensional creeping viscoelastic flow past a biperiodic square array of cylinders within the Oldroyd B, FENE-CR and FENE-P constitutive models of dilute polymer solutions. Our results capture the initial mild decrease then dramatic upturn ('thickening') seen experimentally in the drag coefficient as a function of increasing Weissenberg number. By systematically varying th…
▽ More
We study numerically two-dimensional creeping viscoelastic flow past a biperiodic square array of cylinders within the Oldroyd B, FENE-CR and FENE-P constitutive models of dilute polymer solutions. Our results capture the initial mild decrease then dramatic upturn ('thickening') seen experimentally in the drag coefficient as a function of increasing Weissenberg number. By systematically varying the porosity of the flow geometry, we demonstrate two qualitatively different mechanisms underpinning this thickening effect: one that operates in the highly porous case of widely spaced obstacles, and another for more densely packed obstacles, with a crossover between these two mechanisms at intermediate porosities. We also briefly consider 2D creeping viscoelastic flow past a linear array of cylinders confined to a channel, where we find that the flow is steady for all Weissenberg numbers explored.
△ Less
Submitted 29 November, 2017; v1 submitted 16 January, 2017;
originally announced January 2017.
-
Surface Forces on a Deforming Ellipsoid in Shear Flow
Authors:
E. P. Kightley,
A. Pearson,
J. A. Evans,
D. M. Bortz
Abstract:
We present a model for computing the surface force density on a fluid ellipsoid in simple shear flow, which we derive by coupling existing models for the shape of a fluid droplet and the surface force density on a solid ellipsoid. The primary contribution of this coupling is to develop a method to compute the force acting against a plane intersecting the ellipsoid, which we call the fragmentation…
▽ More
We present a model for computing the surface force density on a fluid ellipsoid in simple shear flow, which we derive by coupling existing models for the shape of a fluid droplet and the surface force density on a solid ellipsoid. The primary contribution of this coupling is to develop a method to compute the force acting against a plane intersecting the ellipsoid, which we call the fragmentation force. The model can be used to simulate the motion, shape, surface force density, and breakage of fluid droplets and colloidal aggregates in shear flow.
△ Less
Submitted 11 October, 2016;
originally announced October 2016.
-
Producing nanodot arrays with improved hexagonal order by patterning surfaces before ion sputtering
Authors:
Daniel A. Pearson,
R. Mark Bradley,
Francis C. Motta,
Patrick D. Shipman
Abstract:
When the surface of a nominally flat binary material is bombarded with a broad, normally-incident ion beam, disordered hexagonal arrays of nanodots can form. Shipman and Bradley have derived equations of motion that govern the coupled dynamics of the height and composition of such a surface [P. D. Shipman and R. M. Bradley, Phys. Rev. B 84, 085420 (2011)]. We investigate the influence of initial c…
▽ More
When the surface of a nominally flat binary material is bombarded with a broad, normally-incident ion beam, disordered hexagonal arrays of nanodots can form. Shipman and Bradley have derived equations of motion that govern the coupled dynamics of the height and composition of such a surface [P. D. Shipman and R. M. Bradley, Phys. Rev. B 84, 085420 (2011)]. We investigate the influence of initial conditions on the hexagonal order yielded by integration of those equations of motion. The initial conditions studied are hexagonal and sinusoidal templates, straight scratches and nominally flat surfaces. Our simulations indicate that both kinds of template lead to marked improvements in the hexagonal order if the initial wavelength is approximately equal to or double the linearly selected wavelength. Scratches enhance the hexagonal order in their vicinity if their width is close to or less than the linearly selected wavelength. Our results suggest that prepatterning a binary material can dramatically increase the hexagonal order achieved at large ion fluences.
△ Less
Submitted 4 November, 2015;
originally announced November 2015.
-
X-type and Y-type junction stability in domain wall networks
Authors:
Richard A. Battye,
Jonathan A. Pearson,
Adam Moss
Abstract:
We develop an analytic formalism that allows one to quantify the stability properties of X-type and Y-type junctions in domain wall networks in two dimensions. A similar approach might be applicable to more general defect systems involving junctions that appear in a range of physical situations, for example, in the context of F- and D-type strings in string theory. We apply this formalism to a par…
▽ More
We develop an analytic formalism that allows one to quantify the stability properties of X-type and Y-type junctions in domain wall networks in two dimensions. A similar approach might be applicable to more general defect systems involving junctions that appear in a range of physical situations, for example, in the context of F- and D-type strings in string theory. We apply this formalism to a particular field theory, Carter's pentavac model, where the strength of the symmetry breaking is governed by the parameter $|ε|< 1$. We find that for low values of the symmetry breaking parameter X-type junctions will be stable, whereas for higher values an X-type junction will separate into two Y-type junctions. The critical angle separating the two regimes is given by α_c = 293^{\circ}\sqrt{|ε|}$ and this is confirmed using simple numerical experiments. We go on to simulate the pentavac model from random initial conditions and we find that the dominant junction is of \ytype for $|ε| \geq 0.02$ and is of \xtype for $|ε| \leq 0.02$. We also find that for small $ε$ the evolution of the number of domain walls $\qsubrm{N}{dw}$ in Minkowski space does not follow the standard $\propto t^{-1}$ scaling law with the deviation from the standard lore being more pronounced as $ε$ is decreased. The presence of dissipation appears to restore the $t^{-1}$ lore.
△ Less
Submitted 18 January, 2012; v1 submitted 7 July, 2011;
originally announced July 2011.
