-
Projected Entangled Pair States with flexible geometry
Authors:
Siddhartha Patra,
Sukhbinder Singh,
Román Orús
Abstract:
Projected Entangled Pair States (PEPS) are a class of quantum many-body states that generalize Matrix Product States for one-dimensional systems to higher dimensions. In recent years, PEPS have advanced understanding of strongly correlated systems, especially in two dimensions, e.g., quantum spin liquids. Typically described by tensor networks on regular lattices (e.g., square, cubic), PEPS have a…
▽ More
Projected Entangled Pair States (PEPS) are a class of quantum many-body states that generalize Matrix Product States for one-dimensional systems to higher dimensions. In recent years, PEPS have advanced understanding of strongly correlated systems, especially in two dimensions, e.g., quantum spin liquids. Typically described by tensor networks on regular lattices (e.g., square, cubic), PEPS have also been adapted for irregular graphs, however, the computational cost becomes prohibitive for dense graphs with large vertex degrees. In this paper, we present a PEPS algorithm to simulate low-energy states and dynamics defined on arbitrary, fluctuating, and densely connected graphs. We introduce a cut-off, $κ\in \mathbb{N}$, to constrain the vertex degree of the PEPS to a set but tunable value, which is enforced in the optimization by applying a simple edge-deletion rule, allowing the geometry of the PEPS to change and adapt dynamically to the system's correlation structure. We benchmark our flexible PEPS algorithm with simulations of classical spin glasses and quantum annealing on densely connected graphs with hundreds of spins, and also study the impact of tuning $κ$ when simulating a uniform quantum spin model on a regular (square) lattice. Our work opens the way to apply tensor network algorithms to arbitrary, even fluctuating, background geometries.
△ Less
Submitted 30 July, 2024;
originally announced July 2024.
-
The Effect of Grain Size Distribution on the Defect Generation Mechanism of 0201 Passives
Authors:
Swagatika Patra,
Christopher. M. Greene,
Daryl. L. Santos
Abstract:
The recent advancements in electronics manufacturing has necessitated the demand for miniaturization of electronic components. In particular, the product sizes for passive components have evolved from 1005 (1.0x0.5mm) which is roughly the size of a grain of sand to 0201 (0.25x0.125mm) which is 1/16th the size of a grain of sand. Grain size distribution and composition play a vital role in tailorin…
▽ More
The recent advancements in electronics manufacturing has necessitated the demand for miniaturization of electronic components. In particular, the product sizes for passive components have evolved from 1005 (1.0x0.5mm) which is roughly the size of a grain of sand to 0201 (0.25x0.125mm) which is 1/16th the size of a grain of sand. Grain size distribution and composition play a vital role in tailoring the demands for reliably shrinking dimension of passives. The study focuses on analyzing the effect of grain size and composition, which plays a significant role in maintaining high yield output during the manufacturing processes. The objective of this study is to compare the grain morphology and its effect on defect generation mechanism for 0201 resistors. The experimental setup was prepared to evaluate the grain structure as per ASTM E112-3 test standards. The 0201 resistor samples from three different vendors were assembled on test vehicle PCB (Printed Circuit Board). The resulting observations of the study showed that tombstoning defect was observed during the reflow process for Vendor A. Scanning Electron Microscope (SEM) results showed the presence of microstructural difference in the tin grain size of resistors. The tin grain size for Vendor A was observed to be 2 microns, whereas the grain size for Vendors B and C were 4 and 5 microns, respectively. Furthermore, the results of grain size measurements performed using the intercept method showed that a grain size number of 13 and 13.6 was observed for Vendors B and C, whereas a grain size number of 15 was observed for Vendor A. The second phase of the study focuses on techniques for improving the grain size number to mitigate the tombstoning defect. It was observed that using an alternate plating solution during the manufacturing of passives resulted in decreased grain size number while containing the tombstoning issue.
△ Less
Submitted 7 June, 2024;
originally announced June 2024.
-
The role of stacking on the electronic structure of MoSe2 at small twist angles
Authors:
Sumanti Patra,
Madhurita Das,
Priya Mahadevan
Abstract:
We consider two high symmetry stackings AA and AB and examine the changes induced in the electronic structure by considering small angles of rotation of 3.48degrees from both these stackings. In both cases we largely recover the low energy electronic structure of the untwisted limit. We additionally find flat bands emerging above the dispersing bands. Surprisingly, while the rotation from the AA e…
▽ More
We consider two high symmetry stackings AA and AB and examine the changes induced in the electronic structure by considering small angles of rotation of 3.48degrees from both these stackings. In both cases we largely recover the low energy electronic structure of the untwisted limit. We additionally find flat bands emerging above the dispersing bands. Surprisingly, while the rotation from the AA end leads to one flat band above the highest occupied band at Γ, one finds two flat bands emerging for small rotations from the AB end. Examining the real space localization of the flat bands allows us to discuss the origin of the flat bands in terms of quantum well states and qualitatively understand the dependence of the number of flat bands found on the twist angle.
△ Less
Submitted 20 October, 2023;
originally announced October 2023.
-
Efficient tensor network simulation of IBM's largest quantum processors
Authors:
Siddhartha Patra,
Saeed S. Jahromi,
Sukhbinder Singh,
Roman Orus
Abstract:
We show how quantum-inspired 2d tensor networks can be used to efficiently and accurately simulate the largest quantum processors from IBM, namely Eagle (127 qubits), Osprey (433 qubits) and Condor (1121 qubits). We simulate the dynamics of a complex quantum many-body system -- specifically, the kicked Ising experiment considered recently by IBM in Nature 618, p. 500-505 (2023) -- using graph-base…
▽ More
We show how quantum-inspired 2d tensor networks can be used to efficiently and accurately simulate the largest quantum processors from IBM, namely Eagle (127 qubits), Osprey (433 qubits) and Condor (1121 qubits). We simulate the dynamics of a complex quantum many-body system -- specifically, the kicked Ising experiment considered recently by IBM in Nature 618, p. 500-505 (2023) -- using graph-based Projected Entangled Pair States (gPEPS), which was proposed by some of us in PRB 99, 195105 (2019). Our results show that simple tensor updates are already sufficient to achieve very large unprecedented accuracy with remarkably low computational resources for this model. Apart from simulating the original experiment for 127 qubits, we also extend our results to 433 and 1121 qubits, and for evolution times around 8 times longer, thus setting a benchmark for the newest IBM quantum machines. We also report accurate simulations for infinitely-many qubits. Our results show that gPEPS are a natural tool to efficiently simulate quantum computers with an underlying lattice-based qubit connectivity, such as all quantum processors based on superconducting qubits.
△ Less
Submitted 2 April, 2024; v1 submitted 27 September, 2023;
originally announced September 2023.
-
Holographic entanglement renormalisation for fermionic quantum matter
Authors:
Abhirup Mukherjee,
Siddhartha Patra,
Siddhartha Lal
Abstract:
We demonstrate the emergence of a holographic dimension in a system of 2D non-interacting Dirac fermions placed on a torus, by studying the scaling of multipartite entanglement measures under a sequence of renormalisation group (RG) transformations applied in momentum space. Geometric measures defined in this emergent space can be related to the RG beta function of the spectral gap, hence establis…
▽ More
We demonstrate the emergence of a holographic dimension in a system of 2D non-interacting Dirac fermions placed on a torus, by studying the scaling of multipartite entanglement measures under a sequence of renormalisation group (RG) transformations applied in momentum space. Geometric measures defined in this emergent space can be related to the RG beta function of the spectral gap, hence establishing a holographic connection between the spatial geometry of the emergent spatial dimension and the entanglement properties of the boundary quantum theory. We prove, analytically, that changing the boundedness of the holographic space involves a topological transition accompanied by a critical Fermi surface in the boundary theory. We go on to show that this results in the formation of a quantum wormhole geometry that connects the UV and the IR of the emergent dimension. The additional conformal symmetry at the transition also supports a relation between the emergent metric and the stress-energy tensor. In the presence of an Aharonov-Bohm flux, the entanglement gains a geometry-independent piece which is shown to be topological, sensitive to changes in boundary conditions, and related to the Luttinger volume of the system. Upon the insertion of a strong transverse magnetic field, we show that the Luttinger volume is linked to the Chern number of the occupied single-particle Landau levels.
△ Less
Submitted 11 June, 2024; v1 submitted 21 February, 2023;
originally announced February 2023.
-
Universal entanglement signatures of quantum liquids as a guide to fermionic criticality
Authors:
Siddhartha Patra,
Anirban Mukherjee,
Siddhartha Lal
Abstract:
An outstanding challenge involves understanding the many-particle entanglement of liquid states of quantum matter that arise in systems of interacting electrons. The Fermi liquid (FL) in $D$ spatial dimensions shows a violation of the area-law in real-space entanglement entropy of a subsystem (of length $L$), $S_{EE} \sim L^{D-1}\ln L$, widely believed to be a hallmark signature of the ground stat…
▽ More
An outstanding challenge involves understanding the many-particle entanglement of liquid states of quantum matter that arise in systems of interacting electrons. The Fermi liquid (FL) in $D$ spatial dimensions shows a violation of the area-law in real-space entanglement entropy of a subsystem (of length $L$), $S_{EE} \sim L^{D-1}\ln L$, widely believed to be a hallmark signature of the ground state of a gapless quantum critical system of interacting fermions. In this work, we apply a $T=0$ renormalisation group approach to a prototype of the FL in momentum (or, $k$)-space, unveiling thereby the RG relevant quantum fluctuations (due to forward and tangential scattering) from which long-range entanglement arises. A similar analysis of non-Fermi liquids such as the 2D marginal Fermi liquid (MFL) and the 1D Tomonaga-Luttinger liquid (TLL) reveals a universal logarithmic violation of the area-law in gapless electronic liquids for a subsystem defined within a $k$-space window (of size $Λ$) proximate to the Fermi surface, with a proportionality constant that depends on the nature of the underlying Fermi surface. We extend this analysis to the gapped quantum liquids emergent from the destabilisation of the Fermi surface by quantum fluctuations arising from backscattering processes. Indeed, we find that the $k$-space entanglement signatures of gapped quantum liquids appear to be governed by the nature of the Fermi surface (e.g., nested or not) from which they emerge, as well as the nature of their parent gapless metallic liquid (e.g., FL, MFL etc.). This is confirmed by our finding an enhanced entanglement entropy for the nodal MFL present at the quantum critical point recently discovered in the 2D Hubbard model at optimal hole-doping. Our work thus paves the way for an entanglement based classification of quantum liquids emergent from the criticality of interacting fermionic matter.
△ Less
Submitted 24 May, 2023; v1 submitted 23 May, 2022;
originally announced May 2022.
-
Frustration shapes multi-channel Kondo physics: a star graph perspective
Authors:
Siddhartha Patra,
Abhirup Mukherjee,
Anirban Mukherjee,
N. S. Vidhyadhiraja,
A. Taraphder,
Siddhartha Lal
Abstract:
We study the overscreened multi-channel Kondo (MCK) model using the recently developed unitary renormalization group (URG) technique. Our results display the importance of ground state degeneracy in explaining various important properties like the breakdown of screening and the presence of local non-Fermi liquids. The impurity susceptibility of the intermediate coupling fixed point Hamiltonian in…
▽ More
We study the overscreened multi-channel Kondo (MCK) model using the recently developed unitary renormalization group (URG) technique. Our results display the importance of ground state degeneracy in explaining various important properties like the breakdown of screening and the presence of local non-Fermi liquids. The impurity susceptibility of the intermediate coupling fixed point Hamiltonian in the zero-bandwidth (or star graph) limit shows a power-law divergence at low temperature, signalling its critical nature. Despite the absence of inter-channel coupling in the MCK fixed point Hamiltonian, the study of mutual information between any two channels shows non-zero correlation between them. A spectral flow analysis of the star graph reveals that the degenerate ground state manifold possesses topological quantum numbers. The low energy effective Hamiltonian obtained upon adding a finite non-zero conduction bath dispersion to the star graph Hamiltonian for both the two and three-channel cases displays the presence of local non-Fermi liquids arising from inter-channel quantum fluctuations. Discontinuous behaviour is observed in several measures of ground state entanglement, signalling the underlying orthogonality catastrophe associated with the degenerate ground state manifold. We extend our results to underscreened and perfectly screened MCK models through duality arguments. A study of channel anisotropy under renormalisation flow reveals a series of quantum phase transitions due to the change in ground state degeneracy. Our work thus presents a template for the study of how a degenerate ground state manifold arising from symmetry and duality properties in a multichannel quantum impurity model can lead to novel multicritical phases at intermediate coupling.
△ Less
Submitted 14 January, 2023; v1 submitted 2 May, 2022;
originally announced May 2022.
-
Length control of long cell protrusions: rulers, timers and transport
Authors:
Swayamshree Patra,
Debashish Chowdhury,
Frank Jülicher
Abstract:
A living cell uses long tubular appendages for locomotion and sensory purposes. Hence, assembling and maintaining a protrusion of correct length is crucial for its survival and overall performance. Usually the protrusions lack the machinery for the synthesis of building blocks and imports them from the cell body. What are the unique features of the transport logistics which facilitate the exchange…
▽ More
A living cell uses long tubular appendages for locomotion and sensory purposes. Hence, assembling and maintaining a protrusion of correct length is crucial for its survival and overall performance. Usually the protrusions lack the machinery for the synthesis of building blocks and imports them from the cell body. What are the unique features of the transport logistics which facilitate the exchange of these building blocks between the cell and the protrusion? What kind of `rulers' and `timers' does the cell use for constructing its appendages of correct length on time? How do the multiple appendages coordinate and communicate among themselves during different stages of their existence? How frequently do the fluctuations drive the length of these dynamic protrusions out of the acceptable bounds? These questions are addressed from a broad perspective in this review which is organized in three parts. In part-I the list of all known cell protrusions is followed by a comprehensive list of the mechanisms of length control of cell protrusions reported in the literature. We review not only the dynamics of the genesis of the protrusions, but also their resorption and regrowth as well as regeneration after amputation. As a case study in part-II, the specific cell protrusion that has been discussed in detail is eukaryotic flagellum (also known as cilium); this choice was dictated by the fact that flagellar length control mechanisms have been studied most extensively over more than half a century in cells with two or more flagella. Although limited in scope, brief discussions on a few non-flagellar cell protrusions in part-III of this review is intended to provide a glimpse of the uncharted territories and challenging frontiers of research on subcellular length control phenomena that awaits vigorous investigations.
△ Less
Submitted 22 March, 2022;
originally announced March 2022.
-
Unveiling topological order through multipartite entanglement
Authors:
Siddhartha Patra,
Somnath Basu,
Siddhartha Lal
Abstract:
It is well known that the topological entanglement entropy ($S_{topo}$) of a topologically ordered ground state in 2 spatial dimensions can be captured efficiently by measuring the tripartite quantum information ($I^{3}$) of a specific annular arrangement of three subsystems. However, the nature of the general N-partite information ($I^{N}$) and quantum correlation of a topologically ordered groun…
▽ More
It is well known that the topological entanglement entropy ($S_{topo}$) of a topologically ordered ground state in 2 spatial dimensions can be captured efficiently by measuring the tripartite quantum information ($I^{3}$) of a specific annular arrangement of three subsystems. However, the nature of the general N-partite information ($I^{N}$) and quantum correlation of a topologically ordered ground state remains unknown. In this work, we study such $I^N$ measure and its nontrivial dependence on the arrangement of $N$ subsystems. For the collection of subsystems (CSS) forming a closed annular structure, the $I^{N}$ measure ($N\geq 3$) is a topological invariant equal to the product of $S_{topo}$ and the Euler characteristic of the CSS embedded on a planar manifold, $|I^{N}|=χS_{topo}$. Importantly, we establish that $I^{N}$ is robust against several deformations of the annular CSS, such as the addition of holes within individual subsystems and handles between nearest-neighbour subsystems. For a general CSS with multiple holes ($n_{h}>1$), we find that the sum of the distinct, multipartite informations measured on the annular CSS around those holes is given by the product of $S_{topo}$, $χ$ and $n_{h}$, $\sum^{n_{h}}_{μ_{i}=1}|I^{N_{μ_{i}}}_{μ_{i}}| = n_{h}χS_{topo}$. The $N^{th}$ order irreducible quantum correlations for an annular CSS of $N$ subsystems is also found to be bounded from above by $|I^{N}|$, which shows the presence of correlations among subsystems arranged in the form of closed loops of all sizes. Our results offer important insight into the nature of the many-particle entanglement and correlations within a topologically ordered state of matter.
△ Less
Submitted 4 December, 2021;
originally announced December 2021.
-
High Responsivity Gate Tunable UV-Visible Broadband Phototransistor Based on Graphene-WS2 Mixed Dimensional (2D-0D) Heterostructure
Authors:
Shubhrasish Mukherjee,
Didhiti Bhattacharya,
Sumanti Patra,
Sanjukta Paul,
Rajib Kumar Mitra,
Priya Mahadevan,
Atindra Nath Pal,
Samit Kumar Ray
Abstract:
Recent progress in the synthesis of highly stable, eco-friendly, cost-effective transition metal-dichalcogenides (TMDC) quantum dots (QDs) with their broadband absorption spectrum and wavelength selectivity features have led to their increasing use in broadband photodetectors. With the solution based processing, we demonstrate a super large (~ 0.75 mm^2), UV-Vis broadband (365-633 nm), phototransi…
▽ More
Recent progress in the synthesis of highly stable, eco-friendly, cost-effective transition metal-dichalcogenides (TMDC) quantum dots (QDs) with their broadband absorption spectrum and wavelength selectivity features have led to their increasing use in broadband photodetectors. With the solution based processing, we demonstrate a super large (~ 0.75 mm^2), UV-Vis broadband (365-633 nm), phototransistor made of WS_2 QDs decorated CVD graphene as active channel with extraordinary stability and durability in ambient condition (without any degradation of photocurrent till 4 months after fabrication). Here, colloidal 0D WS_2-QDs are used as the photo absorbing material and graphene acts as the conducting channel. A high photoresponsivity (3.1 x 10^2 A/W), higher detectivity (2.2 x 10^12 Jones) and low noise equivalent power (4 x 10^{-14} W/Hz^0.5) are obtained at a low bias voltage (V_{ds} = 1V) at an illumination of 365 nm with an optical power as low as 0.8 μW/cm^2, which can further be tuned by modulating the gate bias. While comparing the photocurrent between two different morphologies of WS_2 (QDs and 2D nanosheets), a significant enhancement of photocurrent is observed in case of QDs based device. Ab initio density functional theory based calculations further support our observation, revealing the role of quantum confinement for the enhanced photo response. Our work reveals a strategy towards making a scalable, cost-effective, highly performing hybrid two-dimensional (2D/0D) photo detector with graphene-WS_2 QDs, paving the way towards the next generation optoelectronic applications.
△ Less
Submitted 9 November, 2021;
originally announced November 2021.
-
Origin of Topological Order in a Cooper Pair Insulator
Authors:
Siddhartha Patra,
Siddhartha Lal
Abstract:
We unveil the microscopic origin of the topologically ordered counterpart of the s-wave superconductor in this work. For this, we employ the recently developed unitary renormalisation group (URG) method on a generalised model of 2D electrons attractive interactions. The effective Hamiltonian obtained at the stable low-energy fixed point of the RG flow corresponds to a gapped, insulating state of q…
▽ More
We unveil the microscopic origin of the topologically ordered counterpart of the s-wave superconductor in this work. For this, we employ the recently developed unitary renormalisation group (URG) method on a generalised model of 2D electrons attractive interactions. The effective Hamiltonian obtained at the stable low-energy fixed point of the RG flow corresponds to a gapped, insulating state of quantum matter we call the Cooper pair insulator (CPI). We show that the CPI ground state manifold displays several signatures of topological order, including a four-fold degeneracy when placed on the torus. Spectral flow arguments reveal the emergent gauge-theoretic structure of the effective Hamiltonian, as it can be written entirely in terms of non-local Wilson loops. It also contains a topological $θ$-term whose coefficient is quantised, in keeping with the requirement of invariance of the ground state under large gauge transformations. We find that the long-ranged many-particle entanglement content of the CPI ground state is driven by inter-helicity two-particle scattering processes. Analysis of the passage from CPI to BCS superconducting ground state shows the RG flow promotes fluctuations in the number of condensed Cooper pairs and lowers those in the conjugate global phase. Consequently, the distinct signatures of long-ranged entanglement in the CPI are replaced by the well-known short-ranged entanglement of the BCS state. Finally, we study the renormalisation of the entanglement in $k$-space for both the CPI and BCS ground states. The topologically ordered CPI state is shown to possess an emergent hierarchy of scales of entanglement, and that this hierarchy collapses in the BCS state. Our work offers clear evidence for the microscopic origins of topological order in this prototypical system, and lays the foundation for similar investigations in other systems of correlated electrons.
△ Less
Submitted 25 February, 2021; v1 submitted 24 February, 2021;
originally announced February 2021.
-
Trap Mediated Energy Transport via Vibronic Resonance
Authors:
Sanjoy Patra,
Amitav Sahu,
Vivek Tiwari
Abstract:
Controlling energy transfer through vibronic resonance is an interesting possibility. Exact treatment of non-adiabatic vibronic coupling is necessary to fully capture its role in driving energy transfer. However, exact treatment of vibrations in extended systems is expensive, sometimes requiring oversimplifying approximations to reduce vibrational dimensionality, and do not provide physical insigh…
▽ More
Controlling energy transfer through vibronic resonance is an interesting possibility. Exact treatment of non-adiabatic vibronic coupling is necessary to fully capture its role in driving energy transfer. However, exact treatment of vibrations in extended systems is expensive, sometimes requiring oversimplifying approximations to reduce vibrational dimensionality, and do not provide physical insights into which specific vibrational motions promote energy transport. Here we derive effective normal modes for excitonically coupled aggregates which reduce the overall high-dimensional vibronic Hamiltonian into independent one-dimensional Hamiltonians. Applying this approach on a trimer toy model, we demonstrate trap-mediated energy transport between electronically uncoupled sites. Bringing uncoupled sites into vibronic resonance converts the `trap' into a `conduit' for population transfer, while simultaneously minimizing trapped excitations. Visualizing energy transfer along the aggregate normal modes provides non-intuitive insights into which specific vibrational motions allow for trap-mediated energy transport by promoting vibronic mixing.
△ Less
Submitted 7 November, 2020;
originally announced November 2020.
-
Flagellar length control in monoflagellates by motorized transport: growth kinetics and correlations of length fluctuations
Authors:
Swayamshree Patra,
Debashish Chowdhury
Abstract:
How does a cell self-organize so that its appendages attain specific lengths that are convenient for their respective functions? What kind of 'rulers' does a cell use to measure the length of these appendages? How does a cell transport structure building materials between the cell body and distal tips of these appendages so as to regulate their dynamic lengths during various stages of its lifetime…
▽ More
How does a cell self-organize so that its appendages attain specific lengths that are convenient for their respective functions? What kind of 'rulers' does a cell use to measure the length of these appendages? How does a cell transport structure building materials between the cell body and distal tips of these appendages so as to regulate their dynamic lengths during various stages of its lifetime? Some of these questions are addressed here in the context of a specific cell appendage called flagellum (also called cilium). A "time of flight" (ToF) mechanism, adapted from the pioneering idea of Galileo, has been used successfully very recently to explain the length control of flagella by a biflagellate green algae. Using the same ToF mechanism, here we develop a stochastic model for the dynamics of flagella in two different types of monoflagellate unicellular organisms. A unique feature of these monoflagellates is that these become transiently multi-flagellated during a short span of their life time. The mean length of the flagella in our model reproduce the trend of their temporal variation observed in experiments. Moreover, for probing the intracellular molecular communication between the dynamic flagella of a given cell, we have computed the correlation in the fluctuations of their lengths during the multiflagellated stage of the cell cycle by Monte Carlo simulation.
△ Less
Submitted 16 December, 2020; v1 submitted 12 October, 2020;
originally announced October 2020.
-
Indium gallium nitride quantum dots: Consequence of random alloy fluctuations for polarization entangled photon emission
Authors:
Saroj Kanta Patra,
Stefan Schulz
Abstract:
We analyze the potential of the $c$-plane InGaN/GaN quantum dots for polarization entangled photon emission by means of an atomistic many-body framework. Special attention is paid to the impact of random alloy fluctuations on the excitonic fine structure and the excitonic binding energy. Our calculations show that $c$-plane InGaN/GaN quantum dots are ideal candidates for high temperature entangled…
▽ More
We analyze the potential of the $c$-plane InGaN/GaN quantum dots for polarization entangled photon emission by means of an atomistic many-body framework. Special attention is paid to the impact of random alloy fluctuations on the excitonic fine structure and the excitonic binding energy. Our calculations show that $c$-plane InGaN/GaN quantum dots are ideal candidates for high temperature entangled photon emission as long as the underlying $C_{3v}$-symmetry is preserved. However, when assuming random alloy fluctuations in the dot, our atomistic calculations reveal that while the large excitonic binding energies are only slightly affected, the $C_{3v}$ symmetry is basically lost due to the alloy fluctuations. We find that this loss in symmetry significantly impacts the excitonic fine structure. The observed changes in fine structure and the accompanied light polarization characteristics have a detrimental effect for polarization entangled photon pair emission via the biexciton-exciton cascade. Here, we also discuss possible alternative schemes that benefit from the large excitonic binding energies, to enable non-classical light emission from $c$-plane InGaN/GaN quantum dots at elevated temperatures.
△ Less
Submitted 23 September, 2020;
originally announced September 2020.
-
Level crossing statistics in a biologically motivated model of a long dynamic protrusion: passage times, random and extreme excursions
Authors:
Swayamshree Patra,
Debashish Chowdhury
Abstract:
Long cell protrusions, which are effectively one-dimensional, are highly dynamic subcellular structures. Length of many such protrusions keep fluctuating about the mean value even in the the steady state. We develop here a stochastic model motivated by length fluctuations of a type of appendage of an eukaryotic cell called flagellum (also called cilium). Exploiting the techniques developed for the…
▽ More
Long cell protrusions, which are effectively one-dimensional, are highly dynamic subcellular structures. Length of many such protrusions keep fluctuating about the mean value even in the the steady state. We develop here a stochastic model motivated by length fluctuations of a type of appendage of an eukaryotic cell called flagellum (also called cilium). Exploiting the techniques developed for the calculation of level-crossing statistics of random excursions of stochastic process, we have derived analytical expressions of passage times for hitting various thresholds, sojourn times of random excursions beyond the threshold and the extreme lengths attained during the lifetime of these model flagella. We identify different parameter regimes of this model flagellum that mimic those of the wildtype and mutants of a well known flagellated cell. By analysing our model in these different parameter regimes, we demonstrate how mutation can alter the level-crossing statistics even when the steady state length remains unaffected by the same mutation. Comparison of the theoretically predicted level crossing statistics, in addition to mean and variance of the length, in the steady state with the corresponding experimental data can be used in near future as stringent tests for the validity of the models of flagellar length control. The experimental data required for this purpose, though never reported till now, can be collected, in principle, using a method developed very recently for flagellar length fluctuations.
△ Less
Submitted 8 June, 2021; v1 submitted 22 August, 2020;
originally announced August 2020.
-
Fermionic criticality is shaped by Fermi surface topology: a case study of the Tomonaga-Luttinger liquid
Authors:
Anirban Mukherjee,
Siddhartha Patra,
Siddhartha Lal
Abstract:
We perform a unitary renormalization group (URG) study of the 1D fermionic Hubbard model. The formalism generates a family of effective Hamiltonians and many-body eigenstates arranged holographically across the tensor network from UV to IR. The URG is realized as a quantum circuit, leading to the entanglement holographic mapping (EHM) tensor network description. A topological $Θ$-term of the proje…
▽ More
We perform a unitary renormalization group (URG) study of the 1D fermionic Hubbard model. The formalism generates a family of effective Hamiltonians and many-body eigenstates arranged holographically across the tensor network from UV to IR. The URG is realized as a quantum circuit, leading to the entanglement holographic mapping (EHM) tensor network description. A topological $Θ$-term of the projected Hilbert space of the degrees of freedom at the Fermi surface are shown to govern the nature of RG flow towards either the gapless Tomonaga-Luttinger liquid or gapped quantum liquid phases. This results in a nonperturbative version of the Berezenskii-Kosterlitz-Thouless (BKT) RG phase diagram, revealing a line of intermediate coupling stable fixed points, while the nature of RG flow around the critical point is identical to that obtained from the weak-coupling RG analysis. This coincides with a phase transition in the many-particle entanglement, as the entanglement entropy RG flow shows distinct features for the critical and gapped phases depending on the value of the topological $Θ$-term. We demonstrate the Ryu-Takyanagi entropy bound for the many-body eigenstates comprising the EHM network, concretizing the relation to the holographic duality principle. The scaling of the entropy bound also distinguishes the gapped and gapless phases, implying the generation of very different holographic spacetimes across the critical point. Finally, we treat the Fermi surface as a quantum impurity coupled to the high energy electronic states. A thought-experiment is devised in order to study entanglement entropy generated by isolating the impurity, and propose ways by which to measure it by studying the quantum noise and higher order cumulants of the full counting statistics.
△ Less
Submitted 5 May, 2020;
originally announced May 2020.
-
Flagellar length control in biflagellate eukaryotes: time-of-flight, shared pool, train traffic and cooperative phenomena
Authors:
Swayamshree Patra,
Frank Jülicher,
Debashish Chowdhury
Abstract:
Flagella of eukaryotic cells are transient long cylindrical protrusions. The proteins needed to form and maintain flagella are synthesized in the cell body and transported to the distal tips. What `rulers' or `timers' a specific type of cells use to strike a balance between the outward and inward transport of materials so as to maintain a particular length of its flagella in the steady state is on…
▽ More
Flagella of eukaryotic cells are transient long cylindrical protrusions. The proteins needed to form and maintain flagella are synthesized in the cell body and transported to the distal tips. What `rulers' or `timers' a specific type of cells use to strike a balance between the outward and inward transport of materials so as to maintain a particular length of its flagella in the steady state is one of the open questions in cellular self-organization. Even more curious is how the two flagella of biflagellates, like Chlamydomonas Reinhardtii, communicate through their base to coordinate their lengths. In this paper we develop a stochastic model for flagellar length control based on a time-of-flight (ToF) mechanism. This ToF mechanism decides whether or not structural proteins are to be loaded onto an intraflagellar transport (IFT) train just before it begins its motorized journey from the base to the tip of the flagellum. Because of the ongoing turnover, the structural proteins released from the flagellar tip are transported back to the cell body also by IFT trains. We represent the traffic of IFT trains as a totally asymmetric simple exclusion process (TASEP). The ToF mechanism for each flagellum, together with the TASEP-based description of the IFT trains, combined with a scenario of sharing of a common pool of flagellar structural proteins in biflagellates, can account for all key features of experimentally known phenomena. These include ciliogenesis, resorption, deflagellation as well as regeneration after selective amputation of one of the two flagella. We also show that the experimental observations of Ishikawa and Marshall are consistent with the ToF mechanism of length control if the effects of the mutual exclusion of the IFT trains captured by the TASEP are taken into account. Moreover, we make new predictions on the flagellar length fluctuations and the role of the common pool.
△ Less
Submitted 1 June, 2020; v1 submitted 10 February, 2020;
originally announced February 2020.
-
Preventing Aluminum Photocorrosion for Ultraviolet Plasmonics
Authors:
Aleksandr Barulin,
Jean-Benoît Claude,
Satyajit Patra,
Antonin Moreau,
Julien Lumeau,
Jérôme Wenger
Abstract:
Ultraviolet (UV) plasmonics aims at combining the strong absorption bands of molecules in the UV range with the intense electromagnetic fields of plasmonic nanostructures to promote surface-enhanced spectroscopy and catalysis. Currently, aluminum is the most widely used metal for UV plasmonics, and is generally assumed to be remarkably stable thanks to its natural alumina layer passivating the met…
▽ More
Ultraviolet (UV) plasmonics aims at combining the strong absorption bands of molecules in the UV range with the intense electromagnetic fields of plasmonic nanostructures to promote surface-enhanced spectroscopy and catalysis. Currently, aluminum is the most widely used metal for UV plasmonics, and is generally assumed to be remarkably stable thanks to its natural alumina layer passivating the metal surface. However, we find here that under 266 nm UV illumination, aluminum can undergo a dramatic photocorrosion in water within a few tens of seconds and even at low average UV powers. This aluminum instability in water environments critically limits the UV plasmonics applications. We show that the aluminum photocorrosion is related to the nonlinear absorption by water in the UV range leading to the production of hydroxyl radicals. Different corrosion protection approaches are tested using scavengers for reactive oxygen species and polymer layers deposited on top of the aluminum structures. Using optimized protection, we achieve a ten-fold increase in the available UV power range leading to no visible photocorrosion effects. This technique is crucial to achieve stable use of aluminum nanostructures for UV plasmonics in aqueous solutions.
△ Less
Submitted 25 July, 2019;
originally announced July 2019.
-
Effect of tilt and twist angles on the cleavage crack propagation
Authors:
Vipul Jain,
Arya Chatterjee,
S. Patra,
D. Chakrabarti,
A. Ghosh
Abstract:
We report the mechanism of cleavage crack deviation at grain boundaries. A fracture mechanics based model has been developed to combine the effect of tilt and twist angles between cleavage planes on the reduction in normalized energy release rate. Furthermore, electron back-scatter diffraction analysis on cleavage fracture surface has been carried out. The microstructural features associated with…
▽ More
We report the mechanism of cleavage crack deviation at grain boundaries. A fracture mechanics based model has been developed to combine the effect of tilt and twist angles between cleavage planes on the reduction in normalized energy release rate. Furthermore, electron back-scatter diffraction analysis on cleavage fracture surface has been carried out. The microstructural features associated with the presence of tilt and twist angle at the grain boundary have been identified and found to be consistent with the prediction from the analytical model.
△ Less
Submitted 12 February, 2019;
originally announced February 2019.
-
A Biologically Motivated Asymmetric Exclusion Process: interplay of congestion in RNA polymerase traffic and slippage of nascent transcript
Authors:
Soumendu Ghosh,
Annwesha Dutta,
Shubhadeep Patra,
Jun Sato,
Katsuhiro Nishinari,
Debashish Chowdhury
Abstract:
We develope a theoretical framework, based on exclusion process, that is motivated by a biological phenomenon called transcript slippage (TS). In this model a discrete lattice represents a DNA strand while each of the particles that hop on it unidirectionally, from site to site, represents a RNA polymerase (RNAP). While walking like a molecular motor along a DNA track in a step-by-step manner, a R…
▽ More
We develope a theoretical framework, based on exclusion process, that is motivated by a biological phenomenon called transcript slippage (TS). In this model a discrete lattice represents a DNA strand while each of the particles that hop on it unidirectionally, from site to site, represents a RNA polymerase (RNAP). While walking like a molecular motor along a DNA track in a step-by-step manner, a RNAP simultaneously synthesizes a RNA chain; in each forward step it elongates the nascent RNA molecule by one unit, using the DNA track also as the template. At some special "slippery" position on the DNA, which we represent as a defect on the lattice, a RNAP can lose its grip on the nascent RNA and the latter's consequent slippage results in a final product that is either longer or shorter than the corresponding DNA template. We develope an exclusion model for RNAP traffic where the kinetics of the system at the defect site captures key features of TS events. We demonstrate the interplay of the crowding of RNAPs and TS. A RNAP has to wait at the defect site for longer period in a more congested RNAP traffic, thereby increasing the likelihood of its suffering a larger number of TS events. The qualitative trends of some of our results for a simple special case of our model are consistent with experimental observations. The general theoretical framework presented here will be useful for guiding future experimental queries and for analysis of the experimental data with more detailed versions of the same model.
△ Less
Submitted 24 April, 2019; v1 submitted 27 October, 2018;
originally announced October 2018.
-
A biologically inspired two-species exclusion model: effects of RNA polymerase motor traffic on simultaneous DNA replication
Authors:
Soumendu Ghosh,
Bhavya Mishra,
Shubhadeep Patra,
Andreas Schadschneider,
Debashish Chowdhury
Abstract:
We introduce a two-species exclusion model to describe the key features of the conflict between the RNA polymerase (RNAP) motor traffic, engaged in the transcription of a segment of DNA, concomitant with the progress of two DNA replication forks on the same DNA segment. One of the species of particles ($P$) represents RNAP motors while the other ($R$) represents replication forks. Motivated by the…
▽ More
We introduce a two-species exclusion model to describe the key features of the conflict between the RNA polymerase (RNAP) motor traffic, engaged in the transcription of a segment of DNA, concomitant with the progress of two DNA replication forks on the same DNA segment. One of the species of particles ($P$) represents RNAP motors while the other ($R$) represents replication forks. Motivated by the biological phenomena that this model is intended to capture, a maximum of only two $R$ particles are allowed to enter the lattice from two opposite ends whereas the unrestricted number of $P$ particles constitute a totally asymmetric simple exclusion process (TASEP) in a segment in the middle of the lattice. Consequently, the lattice consists of three segments; the encounters of the $P$ particles with the $R$ particles are confined within the middle segment (segment $2$) whereas only the $R$ particles can occupy the sites in the segments $1$ and $3$. The model captures three distinct pathways for resolving the co-directional as well as head-collision between the $P$ and $R$ particles. Using Monte Carlo simulations and heuristic analytical arguments that combine exact results for the TASEP with mean-field approximations, we predict the possible outcomes of the conflict between the traffic of RNAP motors ($P$ particles engaged in transcription) and the replication forks ($R$ particles). The outcomes, of course, depend on the dynamical phase of the TASEP of $P$ particles. In principle, the model can be adapted to the experimental conditions to account for the data quantitatively.
△ Less
Submitted 22 January, 2018; v1 submitted 31 October, 2017;
originally announced October 2017.
-
Hamiltonian mean field model : effect of temporal perturbation in coupling matrix
Authors:
Nivedita Bhadra,
Soumen K Patra
Abstract:
The Hamiltonian mean-field (HMF) model is a system of fully coupled rotators which exhibits a second-order phase transition at some critical energy in its canonical ensemble. We investigate the case where the interaction between the rotors is governed by a time-dependent coupling matrix. Our numerical study reveals a shift in the critical point due to the temporal modulation. The shift in the crit…
▽ More
The Hamiltonian mean-field (HMF) model is a system of fully coupled rotators which exhibits a second-order phase transition at some critical energy in its canonical ensemble. We investigate the case where the interaction between the rotors is governed by a time-dependent coupling matrix. Our numerical study reveals a shift in the critical point due to the temporal modulation. The shift in the critical point is shown to be independent of the modulation frequency above some threshold value, whereas the impact of the amplitude of modulation is dominant. In the microcanonical ensemble, the system with constant coupling reaches a quasi-stationary state (QSS) at an energy near the critical point. Our result indicates that the QSS subsists in presence of such temporal modulation of the coupling parameter.
△ Less
Submitted 3 May, 2018; v1 submitted 26 October, 2017;
originally announced October 2017.
-
Diffusion dynamics and steady states of systems of hard rods on the square lattice
Authors:
Saugata Patra,
Dibyendu Das,
R. Rajesh,
Mithun K. Mitra
Abstract:
It is known from grand canonical simulations of a system of hard rods on two dimensional lattices that an orientationally ordered nematic phase exists only when the length of the rods is at least seven. However, a recent microcanonical simulation with diffusion kinetics, conserving both total density and zero nematic order, reported the existence of a nematically phase segregated steady state with…
▽ More
It is known from grand canonical simulations of a system of hard rods on two dimensional lattices that an orientationally ordered nematic phase exists only when the length of the rods is at least seven. However, a recent microcanonical simulation with diffusion kinetics, conserving both total density and zero nematic order, reported the existence of a nematically phase segregated steady state with interfaces in the diagonal direction for rods of length six [Phys. Rev. E 95, 052130 (2017)], violating the equivalence of different ensembles for systems in equilibrium. We resolve this inconsistency by demonstrating that the kinetics violate detailed balance condition and drives the system to a nonequilibrium steady state. By implementing diffusion kinetics that drives the system to equilibrium, even within this constrained ensemble, we recover earlier results showing phase segregation only for rods of length greater than or equal to seven. Furthermore, in contrast to the nonequilibrium steady state, the interface has no preferred orientational direction. In addition, by implementing different nonequilibrium kinetics, we show that the interface between the phase segregated states can lie in different directions depending on the choice of kinetics.
△ Less
Submitted 6 October, 2017;
originally announced October 2017.
-
Impact of second-order piezoelectricity on electronic and optical properties of $c$-plane In$_{x}$Ga$_{1-x}$N quantum dots: Consequences for long wavelength emitters
Authors:
Saroj Kanta Patra,
Stefan Schulz
Abstract:
In this work we present a detailed analysis of the second-order piezoelectric effect in $c$-plane In$_{x}$Ga$_{1-x}$N/GaN quantum dots and its consequences for electronic and optical properties of these systems. Special attention is paid to the impact of increasing In content $x$ on the results. We find that in general the second-order piezoelectric effect leads to an increase of the electrostatic…
▽ More
In this work we present a detailed analysis of the second-order piezoelectric effect in $c$-plane In$_{x}$Ga$_{1-x}$N/GaN quantum dots and its consequences for electronic and optical properties of these systems. Special attention is paid to the impact of increasing In content $x$ on the results. We find that in general the second-order piezoelectric effect leads to an increase of the electrostatic built-in field. Furthermore, our results show that for an In content $\geq$30\% this increase in the built-in field has a significant effect on the emission wavelength and the radiative lifetimes. For instance, at 40\% In, the radiative lifetime is more than doubled when taking second-order piezoelectricity into account. Overall our calculations reveal that when designing and describing the electronic and optical properties of $c$-plane In$_{x}$Ga$_{1-x}$N/GaN quantum dot based light emitters with high In contents, second-order piezoelectric effects cannot be neglected.
△ Less
Submitted 11 August, 2017;
originally announced August 2017.
-
A Multispecies Exclusion Process with Fusion and Fission of Rods: a model inspired by Intraflagellar Transport
Authors:
Swayamshree Patra,
Debashish Chowdhury
Abstract:
We introduce a multispecies exclusion model where length-conserving probabilistic fusion and fission of the hard rods are allowed. Although all rods enter the system with the same initial length ${\ell}=1$, their length can keep changing, because of fusion and fission, as they move in a step-by-step manner towards the exit. Two neighboring hard rods of lengths ${\ell}_{1}$ and ${\ell}_{2}$ can fus…
▽ More
We introduce a multispecies exclusion model where length-conserving probabilistic fusion and fission of the hard rods are allowed. Although all rods enter the system with the same initial length ${\ell}=1$, their length can keep changing, because of fusion and fission, as they move in a step-by-step manner towards the exit. Two neighboring hard rods of lengths ${\ell}_{1}$ and ${\ell}_{2}$ can fuse into a single rod of longer length ${\ell}={\ell}_{1}+{\ell}_{2}$ provided ${\ell} \leq N$. Similarly, length-conserving fission of a rod of length ${\ell}' \leq N$ results in two shorter daughter rods. Based on the extremum current hypothesis, we plot the phase diagram of the model under open boundary conditions utilizing the results derived for the same model under periodic boundary condition using mean-field approximation. The density profile and the flux profile of rods are in excellent agreement with computer simulations. Although the fusion and fission of the rods are motivated by similar phenomena observed in Intraflagellar Transport (IFT) in eukaryotic flagella, this exclusion model is too simple to account for the quantitative experimental data for any specific organism. Nevertheless, the concepts of `flux profile' and `transition zone' that emerge from the interplay of fusion and fission in this model are likely to have important implications for IFT and for other similar transport phenomena in long cell protrusions.
△ Less
Submitted 27 November, 2017; v1 submitted 4 July, 2017;
originally announced July 2017.
-
First Passage Time in Computation by Tape-Copying Turing Machines: Slippage of Nascent Tape
Authors:
Soumendu Ghosh,
Shubhadeep Patra,
Debashish Chowdhury
Abstract:
Transcription of the genetic message encoded chemically in the sequence of the DNA template is carried out by a molecular machine called RNA polymerase (RNAP). Backward or forward slippage of the nascent RNA with respect to the DNA template strand give rise to a transcript that is, respectively, longer or shorter than the corresponding template. We model a RNAP as a "Tape-copying Turing machine" (…
▽ More
Transcription of the genetic message encoded chemically in the sequence of the DNA template is carried out by a molecular machine called RNA polymerase (RNAP). Backward or forward slippage of the nascent RNA with respect to the DNA template strand give rise to a transcript that is, respectively, longer or shorter than the corresponding template. We model a RNAP as a "Tape-copying Turing machine" (TCTM) where the DNA template is the input tape while the nascent RNA strand is the output tape. Although the TCTM always steps forward the process is assumed to be stochastic that has a probability of occurrence per unit time. The time taken by a TCTM for each single successful forward stepping on the input tape, during which the output tape suffers lengthening or shortening by $n$ units because of backward or forward slippage, is a random variable; we report some of the statistical characteristics of this time by using the formalism for calculation of the distributions of {\it first-passage time}. The results are likely to find applications in the analysis of experimental data on "programmed" transcriptional error caused by transcriptional slippage which is a mode of "recoding" of genetic information.
△ Less
Submitted 15 April, 2017; v1 submitted 30 March, 2017;
originally announced March 2017.
-
Experimental and theoretical analyses of strongly polarized photon emission from non-polar InGaN quantum dots
Authors:
Tong Wang,
Tim J. Puchtler,
Saroj Kanta Patra,
Tongtong Zhu,
Muhammad Ali,
Tom Badcock,
Tao Ding,
Rachel A. Oliver,
Stefan Schulz,
Robert A. Taylor
Abstract:
We present a comprehensive investigation of the polarization properties of non-polar a-plane InGaN quantum dots (QDs) and their origin with statistically significant experimental data and rigorous k.p modelling. The unbiased selection and study of 180 individual QDs allow us to compute an average polarization degree of 0.90, with a standard deviation of only 0.08. When coupled with theoretical ins…
▽ More
We present a comprehensive investigation of the polarization properties of non-polar a-plane InGaN quantum dots (QDs) and their origin with statistically significant experimental data and rigorous k.p modelling. The unbiased selection and study of 180 individual QDs allow us to compute an average polarization degree of 0.90, with a standard deviation of only 0.08. When coupled with theoretical insights, we show that a-plane InGaN QDs are highly insensitive to size differences, shape anisotropies, and indium content fluctuations. Furthermore, 91% of the studied QDs exhibit a polarization axis along the crystal [1-100] axis, with the other 9% polarized orthogonal to this direction. When coupled with their ability to emit single-photons, a-plane QDs are good candidates for the generation of linearly polarized single-photons, a feature attractive for quantum cryptography protocols.
△ Less
Submitted 19 November, 2016; v1 submitted 22 September, 2016;
originally announced September 2016.
-
Effect of self-affine fractal characteristics of surfaces on wetting
Authors:
S. Sarkar,
S. Patra,
N. Gayathri,
S. Banerjee
Abstract:
The relation between the contact angle of a liquid drop and the morphological parameters of self-affine solid surfaces have been investigated. We show experimentally that the wetting property of a solid surface crucially depends on the surface morphological parameters such as: (1) root mean square (rms) roughness $σ$, (2) in-plane roughness correlation length $ξ$ and (3) roughness exponent $α$ o…
▽ More
The relation between the contact angle of a liquid drop and the morphological parameters of self-affine solid surfaces have been investigated. We show experimentally that the wetting property of a solid surface crucially depends on the surface morphological parameters such as: (1) root mean square (rms) roughness $σ$, (2) in-plane roughness correlation length $ξ$ and (3) roughness exponent $α$ of the self-affine surface. We have shown that the contact angle monotonically decreases with the increase in the rms local surface slope $ρ$ ($\propto σ/ξ^α$) for the cases where the liquid wets the crevices of the surface upon contact. We have shown that the same solid surface can be made hydrophobic or hydrophilic by merely tuning these self-affine surface morphological parameters.
△ Less
Submitted 16 June, 2009; v1 submitted 12 August, 2008;
originally announced August 2008.
