-
Epitaxial growth and stabilization of perovskite phase EuNiO3 thin films through RF sputtering
Authors:
Prashanth S,
Binoy Krishna De,
Shubham Kumar Parate,
Kartick Biswas,
Pavan Nukala
Abstract:
Phase change materials (PCMs) that exhibit volatile resistive switching are promising for emulating neuronal oscillators. Charge transfer insulators, such as ReNiO3 (where Re represents rare earth metals like Pr, Nd, Sm, Eu...), form a family of PCMs with tunable metal-insulator transition (MIT) temperatures across a broad range. Notably, MIT can be adjusted via chemical doping or strain engineeri…
▽ More
Phase change materials (PCMs) that exhibit volatile resistive switching are promising for emulating neuronal oscillators. Charge transfer insulators, such as ReNiO3 (where Re represents rare earth metals like Pr, Nd, Sm, Eu...), form a family of PCMs with tunable metal-insulator transition (MIT) temperatures across a broad range. Notably, MIT can be adjusted via chemical doping or strain engineering. EuNiO3, in particular, is an attractive choice for oscillator devices given its bulk transition temperature (TMI) of approximately 190°C, which is well above room temperature, reducing crosstalk issues while remaining low enough to support energy-efficient applications. We demonstrate a method to stabilize high-quality epitaxial EuNiO3 thin films through scalable reactive RF sputtering and post-annealing, optimizing oxygen partial pressures and annealing temperatures across two substrates. Growth at low or zero oxygen partial pressures resulted in amorphous samples, while higher pressures improved crystallinity but led to the stabilization of Ruddlesden-Popper (RP) phases [An+1BnO3n+1] and associated faults. Post-annealing enhanced crystallinity in all samples, transforming RP phases and faults toward the perovskite phase.
We conducted operando XRD and transport measurements on our films, finding the transition temperatures of perovskite phase samples grown on LAO and LSAT to be approximately 300°C and 250°C, respectively. We attribute the increase in TMI for LAO samples to in-plane compressive strain (-0.76%), which reduces the Ni-O-Ni bond angles in-plane. Similarly, LSAT samples experience in-plane tensile strain (2.1%), which decreases out-of-plane Ni-O-Ni bond angles, increasing TMI compared to bulk. However, this is counteracted by oxygen vacancies due to lowered formation energies. Films that stabilized in RP phases did not exhibit any transition.
△ Less
Submitted 30 October, 2024;
originally announced October 2024.
-
Wavelength-dependent anisotropic light-matter interaction in 2D ferroelectric In2Se3
Authors:
Divya Jangra,
Binoy Krishna De,
Pragati Sharma,
Koushik Chakraborty,
Shubham Parate,
Arvind Kumar Yogi,
Ranjan Mittal,
Mayanak K Gupta,
Pavan Nukala,
Praveen Kumar Velpula,
Vasant G. Sathe
Abstract:
The anisotropic light-matter interactions in 2D materials have garnered significant attention for their potential to develop futuristic polarization-based optoelectronic devices, such as photodetectors and photo-actuators. In this study, we investigate the polarization-dependent interactions in ferroelectric 3R alpha-In2Se3 using Angle-Resolved Polarized Raman Spectroscopy (ARPRS) with different e…
▽ More
The anisotropic light-matter interactions in 2D materials have garnered significant attention for their potential to develop futuristic polarization-based optoelectronic devices, such as photodetectors and photo-actuators. In this study, we investigate the polarization-dependent interactions in ferroelectric 3R alpha-In2Se3 using Angle-Resolved Polarized Raman Spectroscopy (ARPRS) with different excitation lasers. Our experimental findings supported by complementary Density Functional Theory calculations demonstrate that the light-matter interactions depend not only on the crystallographic orientation but also on the excitation energy. Scanning transmission electron microscopy (STEM) confirms the highly anisotropic 3R crystal structure of alpha-In2Se3. This anisotropy in crystal structure facilitates significant optical anisotropy, driven by a complex interplay of electron-photon and electron-phonon interactions, which is reflected in the complex nature of the Raman tensor elements. These anisotropy interactions extend to the materials electrical response under light illumination. Remarkably, the anisotropic photo-response can be tuned by both polarization and wavelength of the incident light, making In2Se3 a promising material for advanced polarization-sensitive photodetection applications.
△ Less
Submitted 26 September, 2024;
originally announced September 2024.
-
Free Standing Epitaxial Oxides Through Remote Epitaxy: The Role of the Evolving Graphene Microstructure
Authors:
Asraful Haque,
Suman Kumar Mandal,
Shubham Kumar Parate,
Harshal Jason Dsouza,
Sakshi Chandola,
Pavan Nukala,
Srinivasan Raghavan
Abstract:
Remote epitaxy has garnered considerable attention as a promising method that facilitates the growth of thin films that replicate the crystallographic characteristics of a substrate by utilizing two-dimensional (2D) material interlayers like graphene. The resulting film can be exfoliated to form a freestanding membrane, and the substrate, if expensive, can be reused. However, atomically thin 2-D m…
▽ More
Remote epitaxy has garnered considerable attention as a promising method that facilitates the growth of thin films that replicate the crystallographic characteristics of a substrate by utilizing two-dimensional (2D) material interlayers like graphene. The resulting film can be exfoliated to form a freestanding membrane, and the substrate, if expensive, can be reused. However, atomically thin 2-D materials are susceptible to damage before and during film growth in the chamber, leading to a poor epitaxy. Oxide remote epitaxy using graphene, the most commonly available 2D material, is particularly challenging because the conventional conditions employed for the growth of epitaxial oxides also degrade graphene. In this study, we show for the first time that a direct correlation exists between the microstructure of graphene, its getting defective on exposure to the pulsed laser deposition plume, and the crystalline quality of the barium titanate film deposited on top. A controlled aperture method was used to reduce graphene damage. Even so, the degree of damage is more at the graphene grain boundaries than within the grains. Large grain-sized greater than 300 microns, graphene suffered less damage and yielded a film comparable to that grown directly on a strontium titanate substrate with a rocking curve half width of 0.6 degrees. Using large grain-sized bi-layer graphene, 4 mm x 5 mm oxide layers were successfully exfoliated and transferred onto SiOx-Si. These insights pave the way for the heterogeneous integration of functional oxides on foreign substrates, holding significant implications for commercializing perovskite oxides by integrating them with Si-CMOS and flexible electronics.
△ Less
Submitted 15 August, 2024;
originally announced August 2024.
-
Room temperature Mott transistor based on resistive switching in disordered V2O3 films grown on Si
Authors:
Binoy Krishna De,
V. G. Sathe,
Divya,
Pragati Sharma,
Shubham Kumar Parate,
Hemant Singh Kunwar,
Pavan Nukala,
S. B. Roy
Abstract:
Electric field-induced giant resistive switching triggered by insulator-to-metal transition (IMT) is one of the promising approaches for developing a new class of electronics often referred to as Mottronics. Achieving this resistive switching by minimal external field at room temperature is of paramount research and technological interest. Mott-IMT is often associated with structural modification,…
▽ More
Electric field-induced giant resistive switching triggered by insulator-to-metal transition (IMT) is one of the promising approaches for developing a new class of electronics often referred to as Mottronics. Achieving this resistive switching by minimal external field at room temperature is of paramount research and technological interest. Mott-IMT is often associated with structural modification, which is very important for optoelectronic and actuator applications. Here, we report a giant resistive switching of about 900 % at room temperature in disordered polycrystalline V2O3-Si thin film stabilized at the IMT phase boundary and associated structural transformation under a small electric field. The increase of electron population in the a1g band under the field is responsible for the Mott gap collapse that drives the structural transition. Furthermore, we also fabricated a room temperature Mott-FET with a channel ON/OFF resistive ratio of about 15. This study provides a fundamental mechanism of the Mott-IMT in V2O3 as well as its device applications.
△ Less
Submitted 17 July, 2024;
originally announced July 2024.
-
Heterogeneous integration of high endurance ferroelectric and piezoelectric epitaxial BaTiO$_3$ devices on Si
Authors:
Asraful Haque,
Harshal Jason D'Souza,
Shubham Kumar Parate,
Rama Satya Sandilya,
Srinivasan Raghavan,
Pavan Nukala
Abstract:
Integrating epitaxial BaTiO$_3$ (BTO) with Si is essential for leveraging its ferroelectric, piezoelectric, and nonlinear optical properties in microelectronics. Recently, heterogeneous integration approaches that involve growth of BTO on ideal substrates followed by transfer to a desired substrate show promise of achieving excellent device-quality films. However, beyond simple demonstrations of t…
▽ More
Integrating epitaxial BaTiO$_3$ (BTO) with Si is essential for leveraging its ferroelectric, piezoelectric, and nonlinear optical properties in microelectronics. Recently, heterogeneous integration approaches that involve growth of BTO on ideal substrates followed by transfer to a desired substrate show promise of achieving excellent device-quality films. However, beyond simple demonstrations of the existence of ferroelectricity, robust devices with high endurance were not yet demonstrated on Si using the latter approach. Here, using a novel two-step approach to synthesize epitaxial BTO using pulsed laser deposition (PLD) on water soluble Sr3Al2O7 (SAO) (on SrTiO$_3$ (STO) substrates), we demonstrate successful integration of high-quality BTO capacitors on Si, with Pr of 7 uC/cm2, Ec 150 kV/cm, ferroelectric and electromechanical endurance of greater than $10^6$ cycles. We further address the challenge of cracking and disintegration of thicker films by first transferring a large area (5 mm x 5 mm) of the templated layer of BTO (~30 nm thick) on the desired substrate, followed by the growth of high-quality BTO on this substrate, as revealed by HRXRD and HRSTEM measurements. These templated Si substrates offer a versatile platform for integrating any epitaxial complex oxides with diverse functionalities onto any inorganic substrate.
△ Less
Submitted 15 July, 2024;
originally announced July 2024.
-
Record cryogenic cooling in ferroelectric hafnia proximity induced via Mott transition
Authors:
Jalaja M A,
Shubham Kumar Parate,
Binoy Krishna De,
Sai Dutt K,
Pavan Nukala
Abstract:
On-chip refrigeration at cryogenic temperatures is becoming an important requirement in the context of quantum technologies and nanoelectronics. Ferroic materials with enhanced electrocaloric effects at phase transitions are good material candidates for the same. By exploiting the Mott metal-insulator transition (MIT) of TiOx(Ny), the bottom electrode, we engineer a depolarization field controlled…
▽ More
On-chip refrigeration at cryogenic temperatures is becoming an important requirement in the context of quantum technologies and nanoelectronics. Ferroic materials with enhanced electrocaloric effects at phase transitions are good material candidates for the same. By exploiting the Mott metal-insulator transition (MIT) of TiOx(Ny), the bottom electrode, we engineer a depolarization field controlled reversible polar to non-polar phase transition in thick La-doped hafnia (40 nm). This transition occurs between ~125 and 140 K and produces giant negative pyroelectric and electrocaloric effects. Refrigeration metrics were estimated between 120 to 200 K, with a peak refrigerant capacity of 25 kJ Kg-1 (2 kJ Kg-1), peak isothermal entropy ΔS~ 8 kJ Kg-1 K-1 (0.5 kJ Kg-1 K-1) and adiabatic ΔTcooling ~ 106 K (11 K) at ~140 K and 5 MV cm-1 (0.5 MV cm-1, and these are the largest reported in any electrocaloric system. Our work fundamentally proposes design guidelines to induce significant solid-state refrigeration through proximity effects, even at cryogenic temperatures relevant to quantum technologies.
△ Less
Submitted 27 March, 2024;
originally announced March 2024.
-
Giant electromechanical response from defective non-ferroelectric epitaxial BaTiO3 integrated on Si 100
Authors:
Sandeep Vura,
Shubham Kumar Parate,
Subhajit Pal,
Upanya Khandelwal,
Rajeev Kumar Rai,
Sri Harsha Molleti,
Vishnu Kumar,
Rama Satya Sandilya Ventrapragada,
Girish Patil,
Mudit Jain,
Ambresh Mallya,
Majid Ahmadi,
Bart Kooi,
Sushobhan Avasthi,
Rajeev Ranjan,
Srinivasan Raghavan,
Saurabh Chandorkar,
Pavan Nukala
Abstract:
Lead free, silicon compatible materials showing large electromechanical responses comparable to, or better than conventional relaxor ferroelectrics, are desirable for various nanoelectromechanical devices and applications. Defect-engineered electrostriction has recently been gaining popularity to obtain enhanced electromechanical responses at sub 100 Hz frequencies. Here, we report record values o…
▽ More
Lead free, silicon compatible materials showing large electromechanical responses comparable to, or better than conventional relaxor ferroelectrics, are desirable for various nanoelectromechanical devices and applications. Defect-engineered electrostriction has recently been gaining popularity to obtain enhanced electromechanical responses at sub 100 Hz frequencies. Here, we report record values of electrostrictive strain coefficients (M31) at frequencies as large as 5 kHz (1.04 x 10-14 m2 per V2 at 1 kHz, and 3.87 x 10-15 m2 per V2 at 5 kHz) using A-site and oxygen-deficient barium titanate thin-films, epitaxially integrated onto Si. The effect is robust and retained even after cycling the devices >5000 times. Our perovskite films are non-ferroelectric, exhibit a different symmetry compared to stoichiometric BaTiO3 and are characterized by twin boundaries and nano polar-like regions. We show that the dielectric relaxation arising from the defect-induced features correlates very well with the observed giant electrostrictive response. These films show large coefficient of thermal expansion (2.36 x 10-5/K), which along with the giant M31 implies a considerable increase in the lattice anharmonicity induced by the defects. Our work provides a crucial step forward towards formulating guidelines to engineer large electromechanical responses even at higher frequencies in lead-free thin films.
△ Less
Submitted 6 March, 2023;
originally announced March 2023.
