-
Microwave programmable response of Co-based microwire polymer composites through wire microstructure and arrangement optimization
Authors:
A. Uddin,
F. X. Qin,
D. Estevez,
S. D. Jiang,
S. A. Jawed,
L. V. Panina,
H. X. Peng
Abstract:
Traditional approaches to realize microwave tunability in microwire polymer composites which mainly rely on topological factors, magnetic field/stress stimuli, and hybridization prove to be burdensome and restricted to rather narrow band frequencies. This work presents a novel yet facile strategy based on a single component tunable medium to program the transmission response over wide frequency ba…
▽ More
Traditional approaches to realize microwave tunability in microwire polymer composites which mainly rely on topological factors, magnetic field/stress stimuli, and hybridization prove to be burdensome and restricted to rather narrow band frequencies. This work presents a novel yet facile strategy based on a single component tunable medium to program the transmission response over wide frequency bands. To this end, we demonstrated that structural modification of one type of microwire through suitable current annealing and arrangement of the annealed wires in multiple combinations were sufficient to distinctly red-shift the transmission dip frequency of the composites. Such one wire control-strategy endorsed a programmable multivariable system grounded on the variations in both the overall array conductivity or "effectiv" area determined by the wires arrangement and the relaxation time dictated by the annealing degree of microwires. These results can be used to prescribe transmission frequency bands of desired features via diverse microwire arrays and microwave performance from a single component to a composite system design.
△ Less
Submitted 25 June, 2019; v1 submitted 12 April, 2019;
originally announced April 2019.
-
Ferromagnetic Wires Composite Media with Tunable Scattering Spectra at Microwaves
Authors:
D. P. Makhnovskiy,
L. V. Panina,
C. Garcia,
A. P. Zhukov,
J. Gonzalez
Abstract:
We demonstrate composite media with ferromagnetic wires that exhibit a frequency region at the microwave regime with scattering spectra strongly dependent on an external magnetic field or stress. These tunable composite materials have recently been proposed theoretically; however, no direct experimental verification has been reported. We used composite materials with predominantly oriented CoFeC…
▽ More
We demonstrate composite media with ferromagnetic wires that exhibit a frequency region at the microwave regime with scattering spectra strongly dependent on an external magnetic field or stress. These tunable composite materials have recently been proposed theoretically; however, no direct experimental verification has been reported. We used composite materials with predominantly oriented CoFeCrSiB glass-coated amorphous wires having large magnetoimpedance at GHz frequencies. The free space measurements of reflection and transmission coefficients were conducted in the frequency range 1-8 GHz in the presence of an external static magnetic field or stress applied to the whole sample. In general, the transmission spectra show greater changes in the range of 10dB for a relatively small magnetic field of few Oe or stress of 0.1 MPa. The obtained results are quantitatively consistent with the analytical expressions predicted by the effective medium arguments. The incident electromagnetic wave induces an electrical dipole moment in each wire, the aggregate of which forms the effective dipole response of the whole composite structure in the radiative near or far field region. The field and stress dependences of the effective response arise from a field or tensile stress sensitivity of the ac surface impedance of a ferromagnetic wire. In the vicinity of the antenna resonance the variations in the magneto-impedance of the wire inclusions result in large changes of the total effective response. A number of applications of proposed materials is discussed including the field tunable microwave surfaces and the self-sensing media for the remote non-destructive evaluation of structural materials.
△ Less
Submitted 19 April, 2006; v1 submitted 27 February, 2006;
originally announced February 2006.
-
Field and stress tunable microwave composite materials based on ferromagnetic microwires
Authors:
D. P. Makhnovskiy,
L. V. Panina
Abstract:
New types of tunable composite materials are considered, the effective microwave permittivity of which may depend on an external dc magnetic field or tensile stress. The composites consist of short pieces of conductive ferromagnetic microwires embedded into a dielectric matrix. The short wire inclusions play a role of the elementary scatterers, when the electromagnetic wave irradiates the compos…
▽ More
New types of tunable composite materials are considered, the effective microwave permittivity of which may depend on an external dc magnetic field or tensile stress. The composites consist of short pieces of conductive ferromagnetic microwires embedded into a dielectric matrix. The short wire inclusions play a role of the elementary scatterers, when the electromagnetic wave irradiates the composite and induces a longitudinal current distribution and electrical dipole moment in each inclusion. These induced dipole moments form the dipole response, which can be characterized by some complex effective permittivity. The later may have a resonance or relaxation dispersion caused by the strong current distribution along a wire, which depends on the wire high frequency surface impedance. In the vicinity of the resonance frequency any variations in the wire surface impedance result in a large change of the current distribution, and hence in the dipole moment of each inclusion and the effective permittivity on the whole. For a ferromagnetic conductive microwire, the surface impedance may depend not only on its conductivity but also on the dc external magnetic field and tension through the so-called magneto-impedance effect (MI). Therefore, the dispersion of the effective permittivity can be tuned from a resonance type to a relaxation type, when a sufficient magnetic field or tensile stress is applied to the composite sample. A number of applications can be proposed, including the stress-sensitive media for remote non-destructive health monitoring of different structures, and selective microwave coatings with field-dependent reflection/transmission coefficients.
△ Less
Submitted 10 October, 2005; v1 submitted 28 April, 2004;
originally announced April 2004.
-
Stress effect on magnetoimpedance (MI) in amorphous wires at GHz frequencies and application to stress-tunable microwave composite materials
Authors:
L. V. Panina,
S. I. Sandacci,
D. P. Makhnovskiy
Abstract:
The effect of tensile stress on magnetoimpedance (MI) in CoMnSiB amorphous wires at microwave frequencies (0.5-3 GHz) is investigated both experimentally and theoretically. In the presence of the dc bias magnetic field of the order of the anisotropy field, the impedance shows very large and sensitive change when the wire is subjected to a tensile stress: 100% and 60% per 180 MPa for frequencies…
▽ More
The effect of tensile stress on magnetoimpedance (MI) in CoMnSiB amorphous wires at microwave frequencies (0.5-3 GHz) is investigated both experimentally and theoretically. In the presence of the dc bias magnetic field of the order of the anisotropy field, the impedance shows very large and sensitive change when the wire is subjected to a tensile stress: 100% and 60% per 180 MPa for frequencies 500 MHz and 2.5 GHz, respectively. It is demonstrated that this behavior owes mainly to the directional change in the equilibrium magnetization caused by the applied stress and field, which agrees well with the theoretical results for the surface impedance. This stress effect on MI is proposed to use for creating microwave stress-tunable composite materials containing short magnetic wires. The analysis of the dielectric response from such materials shows that depending on the stress level in the material, the dispersion of the effective permittivity can be of a resonant or relaxation type with a considerable change in its values (up to 100% at 600 MPa). This media can be used for structural stress monitoring by microwave contrast imaging.
△ Less
Submitted 18 November, 2004; v1 submitted 29 March, 2004;
originally announced March 2004.
-
Stress-Dependent Magnetoimpedance in Co-Based Amorphous Wires and Application to Tunable Microwave Composites
Authors:
S. I. Sandacci,
D. P. Makhnovskiy,
L. V. Panina,
V. S. Larin
Abstract:
A remarkably strong dependence of magnetoimpedance (MI) on tensile stress has been observed in the microwave frequency range for thin CoMnSiB glass-coated microwires exposed to a special thermal treatment. The MI ratio runs into more than 100% at 0.5-1.5 GHz when the tensile stress of 600 MPa is applied to the wire. It was demonstrated that a large MI change at such high frequencies is related p…
▽ More
A remarkably strong dependence of magnetoimpedance (MI) on tensile stress has been observed in the microwave frequency range for thin CoMnSiB glass-coated microwires exposed to a special thermal treatment. The MI ratio runs into more than 100% at 0.5-1.5 GHz when the tensile stress of 600 MPa is applied to the wire. It was demonstrated that a large MI change at such high frequencies is related predominantly with the dc magnetization orientation. A host of such microwires incorporated into a dielectric matrix may constitute a new sensing medium that is characterized by the stress-dependent effective permittivity. Such medium can be used for the microwave visualization of the stress distribution inside of a composite structure or on its surface.
△ Less
Submitted 8 February, 2005; v1 submitted 30 January, 2004;
originally announced February 2004.
-
Effect of transition layers on the electromagnetic properties of composites containing conducting fibres
Authors:
D. P. Makhnovskiy,
L. V. Panina,
D. J. Mapps,
A. K. Sarychev
Abstract:
The approach to calculating the effective dielectric and magnetic response in bounded composite materials is developed. The method is essentially based on the renormalisation of the dielectric matrix parameters to account for the surface polarisation and the displacement currents at the interfaces. This makes it possible the use of the effective medium theory developed for unbounded materials, w…
▽ More
The approach to calculating the effective dielectric and magnetic response in bounded composite materials is developed. The method is essentially based on the renormalisation of the dielectric matrix parameters to account for the surface polarisation and the displacement currents at the interfaces. This makes it possible the use of the effective medium theory developed for unbounded materials, where the spatially-dependent local dielectric constant and magnetic permeability are introduced. A detailed mathematical analysis is given for a dielectric layer having conducting fibres with in-plane positions. The surface effects are most essential at microwave frequencies in correspondence to the resonance excitation of fibres. In thin layers (having a thickness of the transition layer), the effective dielectric constant has a dispersion region at much higher frequencies compared to those for unbounded materials, exhibiting a strong dependence on the layer thickness. For the geometry considered, the effective magnetic permeability differs slightly from unity and corresponds to the renormalised matrix parameter. The magnetic effect is due entirely to the existence of the surface displacement currents.
△ Less
Submitted 2 August, 2002;
originally announced August 2002.
-
Field dependent permittivity of composite materials containing ferromagnetic wires
Authors:
D. P. Makhnovskiy,
L. V. Panina
Abstract:
The effective permittivity of composites containing ferromagnetic microwires has been analysed within a one-particle approximation, by considering a wire piece as an independent scatterer and solving the scattering problem with the impedance boundary condition. A new integro-differential equation for the current distribution in a wire is obtained, which is valid for the surface impedance matrix…
▽ More
The effective permittivity of composites containing ferromagnetic microwires has been analysed within a one-particle approximation, by considering a wire piece as an independent scatterer and solving the scattering problem with the impedance boundary condition. A new integro-differential equation for the current distribution in a wire is obtained, which is valid for the surface impedance matrix of a general form. In the vicinity of the antenna resonance, the dispersion behaviour of the effective permittivity can depend strongly on a dc external magnetic field applied to the whole composite sample, experiencing a transformation from a resonant spectrum to a relaxation one. If the resonance-like dispersion behaviour is realised, the real part of the effective permittivity can be made negative past the resonance for sufficiently small wire-inclusion concentrations (well below the percolation threshold). Applying a dc external magnetic field, the negative peak of the real part of effective permittivity continuously decreases as the dispersion tends to become of a relaxation type. The magnetic field required to cause these changes in the effective permittivity is of the order of the anisotropy field, that is, in the range of few Oe for Co-based microwires. The field dependence of the effective permittivity arises from a high sensitivity of the ac surface impedance of a ferromagnetic wire to a magnetic field (known as the magneto-impedance (MI) effect). This work demonstrates a possibility of using the MI effect to design field-controlled composites and band-gap structures. Another range of applications is related to tuneable waveguides where the composite material is used as an additional field-dependent cover.
△ Less
Submitted 25 January, 2003; v1 submitted 1 August, 2002;
originally announced August 2002.
-
Optomagnetic composite medium with conducting nanoelements
Authors:
L. V. Panina,
A. N. Grigorenko,
D. P. Makhnovskiy
Abstract:
A new type of metal-dielectric composites has been proposed that is characterised by a resonance-like behaviour of the effective permeability in the infrared and visible spectral ranges. This material can be referred to as optomagnetic medium. The analytical formalism developed is based on solving the scattering problem for considered inclusions with impedance boundary condition, which yields th…
▽ More
A new type of metal-dielectric composites has been proposed that is characterised by a resonance-like behaviour of the effective permeability in the infrared and visible spectral ranges. This material can be referred to as optomagnetic medium. The analytical formalism developed is based on solving the scattering problem for considered inclusions with impedance boundary condition, which yields the current and charge distributions within the inclusions. The presence of the effective magnetic permeability and its resonant properties lead to novel optical effects and open new possible applications.
△ Less
Submitted 25 September, 2002; v1 submitted 15 May, 2002;
originally announced May 2002.
