Showing 1–50 of 119 results for author: Pandey, S K

Strain-tunable type-II to type-III & Gimbal nodal line transition in Imm2-phase of Cu$_2$SnS$_3$: An ab-initio study

Authors: Prakash Pandey, Sudhir K. Pandey

Abstract: Topological nodal line semimetals (NLSMs) represent an intriguing quantum phase, opening new avenues in materials science for practical applications such as anisotropic transport devices, high-mobility conductors, unconventional thermoelectrics, and nonlinear optical devices. Recently, Cu$_2$SnS$_3$ has been theoretically proposed as a type-II NLSM, with its Fermi surface containing only one nodal… ▽ More Topological nodal line semimetals (NLSMs) represent an intriguing quantum phase, opening new avenues in materials science for practical applications such as anisotropic transport devices, high-mobility conductors, unconventional thermoelectrics, and nonlinear optical devices. Recently, Cu$_2$SnS$_3$ has been theoretically proposed as a type-II NLSM, with its Fermi surface containing only one nodal ring. Here, we demonstrate how uniaxial, equi-biaxial, and equi-triaxial strains affect the nodal line state of the $Imm2$-phase of Cu$_2$SnS$_3$ by using state-of-the-art ab-initio calculations. Under the application of uniaxial compressive strain (UCS) along the a-direction, the plane of the nodal line evolves from the $k_x$-$k_z$ to $k_y$-$k_z$ for 6\%$\leq$UCS$\leq$8\%. In contrast, under uniaxial tensile strain (UTS), the nodal line remains in the ($k_x$-$k_z$) plane across the entire studied range of UTS. Interestingly, on the application of equi-biaxial tensile strain (EBTS) along a-b (a-c) directions, it hosts only one nodal ring below 8\% ($<$6\%), which further evolves into three (seven) nodal-ring for EBTS of 8\% (6\%$\leq$EBTS$\leq$8\%). Upon the application of EBTS along a-c directions, we found two sets of three mutually orthogonal, intersecting nodal loops (topological gimbals). Apart from this, under the application of equi-biaxial compressive strain (EBCS) along the a-b (a-c) directions, it exhibits only one nodal ring up to 8\% (7\%). Beyond this, the nodal line completely vanishes and does not reappear at higher values of EBCS. Under equi-triaxial tensile strain (ETTS), Cu$_2$SnS$_3$ exhibits only one nodal-ring $<$6\%, which subsequently transforms into five nodal-ring for 6\%$\leq$ETTS$\leq$8\%. However, under the application of equi-triaxial compressive strain (ETCS), as in EBCS, only one nodal line exists up to 6\% ETCS. △ Less

Submitted 10 July, 2025; originally announced July 2025.

Significant role of first-principles electron-phonon coupling in the electronic and thermoelectric properties of LiZnAs and ScAgC semiconductors

Authors: Vinod Kumar Solet, Sudhir K. Pandey

Abstract: The half-Heusler (hH) compounds are currently considered promising thermoelectric (TE) materials due to their favorable thermopower and electrical conductivity. Accurate estimates of these properties are therefore highly desirable and require a detailed understanding of the microscopic mechanisms that govern transport. To enable such estimations, we carry out comprehensive first-principles computa… ▽ More The half-Heusler (hH) compounds are currently considered promising thermoelectric (TE) materials due to their favorable thermopower and electrical conductivity. Accurate estimates of these properties are therefore highly desirable and require a detailed understanding of the microscopic mechanisms that govern transport. To enable such estimations, we carry out comprehensive first-principles computations of one of the primary factors limiting carrier transport, namely the electron-phonon ($e-ph$) interaction, in representative hH semiconductors such as LiZnAs and ScAgC. Our study first investigates the $e-ph$ renormalization of electronic dispersion based on the non-adiabatic Allen-Heine-Cardona theory. We then solve the Boltzmann transport equation (BTE) under multiple relaxation-time approximations (RTAs) to evaluate the carrier transport properties. Phonon-limited electron and hole mobilities are comparatively assessed using the linearized self-energy and momentum RTAs (SERTA and MRTA), and the exact or iterative BTE (IBTE) solutions within $e-ph$ coupling. Electrical transport coefficients for TE performance are also comparatively analyzed under the constant RTA (CRTA), SERTA, and MRTA schemes. The lattice thermal conductivity, determined from phonon-phonon interaction, is further reduced through nanostructuring techniques. The bulk LiZnAs (ScAgC) compound achieves the highest figure of merit ($zT$) of 1.05 (0.78) at 900 K with an electron doping concentration of 10$^{18}$ (10$^{19}$) cm$^{-3}$ under the MRTA scheme. This value significantly increases to 1.53 (1.0) for a 20 nm nanostructured sample. The remarkably high $zT$ achieved through inherently present phonon-induced electron scattering and the grain-boundary effect in semiconductors opens a promising path for discovering highly efficient and accurate hH materials for TE technology. △ Less

Submitted 16 June, 2025; originally announced June 2025.

Comments: 11 pages, 8 figures

Revisiting the Topological Nature of TaIrTe4, SrSi2, and Cu2XY3: An ab-initio Investigation

Authors: Prakash Pandey, Sudhir K. Pandey

Abstract: Several topological electronic materials have been theoretically predicted, leading to a comprehensive catalog systematically characterized by their band crossings. Researchers have attempted to experimentally verify the topological nature of some materials from the present catalogs, but not all efforts have yielded positive results. Here, we introduce a possible reason for the discrepancies betwe… ▽ More Several topological electronic materials have been theoretically predicted, leading to a comprehensive catalog systematically characterized by their band crossings. Researchers have attempted to experimentally verify the topological nature of some materials from the present catalogs, but not all efforts have yielded positive results. Here, we introduce a possible reason for the discrepancies between theoretical and experimental results. In this direction, firstly we have revisited the nature of the well-known topological materials TaIrTe$_4$ and SrSi$_2$ using \textit{state-of-the-art ab-initio} calculations, and found additional Weyl points in both materials that were missing in previously reported studies. Then we have verified the recently predicted topological states of the \textit{Imm2}-phase of Cu$_2$XY$_3$ (X=Si, Ge, Sn \& Y=S, Se, Te). Contrary to previously reported results, we did not find any Weyl points or nodal arcs in Cu$_2$SnTe$_3$. Notably, our theoretical results reveal that Cu$_2$SiTe$_3$, Cu$_2$GeTe$_3$ and Cu$_2$GeSe$_3$ each host four small nodal rings, eight Weyl points, and eight nodal arcs, respectively, which differ from previous studies. Considering Cu$_2$SnS$_3$ as an example, we have also investigated the robustness of the topological phase against local strain. Our study provides insights into the inconsistencies between theoretical predictions and experimental results, and demonstrates how the topological phase is sensitive to changes in lattice parameters, atomic positions, and exchange-correlation functionals. △ Less

Submitted 30 May, 2025; originally announced May 2025.

C-BerryANC: A first-principle C++ code to calculate Berry Curvature dependent anomalous Nernst conductivity in any material

Authors: Vivek Pandey, Sudhir K. Pandey

Abstract: The anomalous Nernst conductivity (ANC) is a key transport property in magnetic and topological materials, arising from the Berry curvature ($\boldsymbolΩ$) of electronic bands. It offers deep insight into the underlying topology and thermoelectric behavior. While Wannier interpolation have become popular for calculating ANC due to their computational efficiency, their accuracy critically depends… ▽ More The anomalous Nernst conductivity (ANC) is a key transport property in magnetic and topological materials, arising from the Berry curvature ($\boldsymbolΩ$) of electronic bands. It offers deep insight into the underlying topology and thermoelectric behavior. While Wannier interpolation have become popular for calculating ANC due to their computational efficiency, their accuracy critically depends on the quality of the Wannierization, which can be challenging for entangled bands or materials with complex band crossings. These limitations highlight the need for a direct first-principles approach to reliably compute ANC from ab-initio electronic structures. Here, we present a C++ based code named C-BerryANC that calculates $\boldsymbolΩ$-dependent ANC by directly using the eigenvalues and momentum-matrices obtained from DFT calculations. Presently, the code is interfaced with WIEN2k package which uses all-electron approach and full-potential linearized augmented plane wave (FP-LAPW) based method. For efficiently handling dense k-mesh, calculation of $\boldsymbolΩ$ is made parallel over k-points using the OpenMP method. Additionally, the code stores band-resolved components of $\boldsymbolΩ$ in binary files thereby reducing the memory occupancy and providing fast post-process option to compute ANC for any range of chemical potential and temperature values. Also, as compilation of C++ modules produce executable files which are in machine level language, computational speed of C-BerryANC is very fast. The code is benchmarked over some well-known materials exhibiting ANC. These includes- Pd, Fe$_3$Al & Co$_2$FeAl. The obtained values of ANC is found to in good agreement with the previously reported data. This highlights the accuracy, efficieny and reliability of the C-BerryANC code. △ Less

Submitted 25 May, 2025; originally announced May 2025.

Studying the Seebeck coefficient and exploring the possibility of enhancing ZT upto 1.8 for NaCo$_2$O$_4$ in high temperature region

Authors: Rahul Raj, Sudhir K. Pandey

Abstract: Here, we have studied the temperature dependent Seebeck coefficient (S) of the NaCo$_2$O$_4$ (NCO) by using experimental and computational methods. The range of experimentally obtained S is $\sim$55 to 103 $μ$V/K in the temperature range of 300-600 K, which confirms the p-type behaviour of NCO. The electronic structure of this compound is obtained via DFT+U formalism. The band dispersion and parti… ▽ More Here, we have studied the temperature dependent Seebeck coefficient (S) of the NaCo$_2$O$_4$ (NCO) by using experimental and computational methods. The range of experimentally obtained S is $\sim$55 to 103 $μ$V/K in the temperature range of 300-600 K, which confirms the p-type behaviour of NCO. The electronic structure of this compound is obtained via DFT+U formalism. The band dispersion and partial density of states confirms the magnetic and half metallic nature. Furthermore, in the transport properties, the obtained S using a U = 4 eV gives the best match with experimental data. The temperature and chemical potential dependent S$^{2}$$σ$$/$$τ$ is calculated using the obtained electronic transport properties, in which the maximum value obtained for p(n)-type doping is $\sim$22(61)$\times$10$^1$$^4$ $μ$WK$^{-2}$cm$^{-1}$s$^{-1}$. The possibility of enhancing the ZT is identified, and it is calculated in temperature range 300-1200 K. The maximum calculated value of ZT is 0.64 for p-type and 1.8 for n-type doping at 1200 K. The calculated carrier concentration obtained for p(n) type doping at 1200 K is $\sim$1.17 (1.6)$\times$10$^2$$^2$ cm$^-$$^3$. This study suggests that the careful doping of p and n type can enhance the applicability of this compound in thermoelectric for high temperature application. △ Less

Submitted 5 May, 2025; originally announced May 2025.

Signatures of Hund$'s$ metal physics in single-layered 3d transition metal oxide, $\mathrm{Sr_2CoO_4}$

Authors: Shivani Bhardwaj, Sudhir K Pandey

Abstract: With density functional theory plus dynamical mean-field theory, we study the influence of Hund's coupling on the nature of electronic correlations in $\mathrm{Sr_2CoO_4}$. Our results suggest strong signatures of Hund's metal physics in this compound. The Co 3$d$ states show large orbital differentiation in the degree of correlations and mass enhancement. The imaginary-time correlation functions… ▽ More With density functional theory plus dynamical mean-field theory, we study the influence of Hund's coupling on the nature of electronic correlations in $\mathrm{Sr_2CoO_4}$. Our results suggest strong signatures of Hund's metal physics in this compound. The Co 3$d$ states show large orbital differentiation in the degree of correlations and mass enhancement. The imaginary-time correlation functions suggest the presence of spin-orbital separation and large local charge fluctuations in the system. Breakdown of the Fermi-liquid picture is observed at the lowest calculated temperature for various strengths of Hund's coupling, suggesting the Fermi-liquid coherence scale lower than $\sim$100 K. Interestingly, a sudden emergence of a gapped state is noted for $e_g$ orbitals in its spectral density of states at $\sim$200 K in the vicinity of Fermi-level. Among the Co 3$d$ states 3$d_{z^2}$ and 3$d_{x^2-y^2}$ foster enlarged correlations. This study conclusively identifies $\mathrm{Sr_2CoO_4}$ as the first single-layered 3$d$ transition metal oxide to be classified as Hund's metal. △ Less

Submitted 29 April, 2025; v1 submitted 28 April, 2025; originally announced April 2025.

Many-body \textit{ab initio} study of quasiparticle \& optical excitations and exciton analysis in LiZnAs and ScAgC for photovoltaic applications

Authors: Vinod Kumar Solet, Sudhir K. Pandey

Abstract: Using first-principles density-functional theory and many-body excited-state calculations, we study the quasiparticle band structure, optical and excitonic properties of two half-Heusler (HH) compounds, namely LiZnAs and ScAgC, for photovoltaic (PV) applications. Our results reveal a direct bandgap semiconducting behavior in LiZnAs (ScAgC) with a value of 1.5 (1.0) eV under an accurate G$_0$W$_0$… ▽ More Using first-principles density-functional theory and many-body excited-state calculations, we study the quasiparticle band structure, optical and excitonic properties of two half-Heusler (HH) compounds, namely LiZnAs and ScAgC, for photovoltaic (PV) applications. Our results reveal a direct bandgap semiconducting behavior in LiZnAs (ScAgC) with a value of 1.5 (1.0) eV under an accurate G$_0$W$_0$ calculation. The highest value of the imaginary part of dielectric function is found as 52 (87), 77 (87), 88 (91) using the independent-quasiparticle approximation, local field effects in random-phase approximation, and electron-hole interaction in the Bethe-Salpeter equation, respectively. Both materials demonstrate a high refractive index, high absorption coefficients (1.2-1.6 $\times 10^6 cm^{-1}$), and low reflectivity (< 40%) in active region of the solar spectrum. The triply degenerate bright excitons (exciton A) at the main absorption peak and a considerable number of bright excitonic states in the visible region, are observed; however, the excitons oscillator strength are comparatively weaker in ScAgC than in LiZnAs. We further discuss the exciton character contributing to intense optical interband transitions and reveal that direct band gap is associated to the loosely bound exciton A state with binding energy of 45 (56) meV in LiZnAs (ScAgC). Exciton A is found to be highly localized (delocalized) in momentum (real) space, indicating the presence of Mott-Wannier type excitons at bandgap. Finally, we assess the solar efficiencies using the spectroscopic limited maximum efficiency (SLME) model and find SLME values of 32% for LiZnAs and 31% for ScAgC at a 0.4 $μ$m thin-film thickness. These findings highlight the significant role of excitons in solar energy absorption process and also suggest that both are highly suitable candidates for single-junction thin-film solar cells. △ Less

Submitted 1 April, 2025; originally announced April 2025.

Comments: 15 pages, 9 figures

$\textit{PY-BerryAHC}$: An $\textit{ab-initio}$ python 3 code to calculate Berry Curvature dependent Anomalous Hall Conductivity in any material

Authors: Vivek Pandey, Sudhir K. Pandey

Abstract: The anomalous Hall conductivity (AHC) in materials has long been a topic of debate. Studies reveal that AHC originates from the Berry curvature ($\boldsymbolΩ$) of Bloch states. Accurate computation of AHC is crucial for predicting material properties and guiding experimental studies in topological and spintronic applications. Traditional approaches often rely on wannier interpolation, which can i… ▽ More The anomalous Hall conductivity (AHC) in materials has long been a topic of debate. Studies reveal that AHC originates from the Berry curvature ($\boldsymbolΩ$) of Bloch states. Accurate computation of AHC is crucial for predicting material properties and guiding experimental studies in topological and spintronic applications. Traditional approaches often rely on wannier interpolation, which can introduce inaccuracies and computational overhead. Also, reliability of the wannierization technique becomes questionable when the bands are highly entangled and dispersive. This demands the calculation of AHC using the $\textit{first-principle}$ approach. Here, we present $\textit{PY-BerryAHC}$, a Python 3 based code that directly computes $\boldsymbolΩ$ and AHC using WIEN2k output. Since, WIEN2k employs an all-electron full-potential linearized augmented plane wave method, $\textit{PY-BerryAHC}$ provides highly accurate AHC results. The code efficiently handles large $\textbf{k}$-grids by parallelizing $\boldsymbolΩ$ computations over $\textbf{k}$-points. Also, it stores band-resolved $\boldsymbolΩ$ in a binary file, thereby greatly reducing the required storage memory and allowing fast post-processing to compute AHC. $\textit{PY-BerryAHC}$ has been validated on well-known materials exhibiting AHC. These include- Fe, Fe$_3$Ge & Co$_2$FeAl. At 300 K, the calculated magnitude of $σ_{xy}$ for Fe & Fe$_3$Ge is found to be 744 $S/cm$ & 311 $S/cm$, respectively. For Co$_2$FeAl, the magnitude of $σ_{xy}$ is obtained to be $\sim$56 $S/cm$ and is found to be constant with the change in temperature from 0-300 K. These results are in good agreement with previously reported theoretical and experimental data. This ensures the accuracy, reliability and efficiency of the code. The code is also provided with a post-processing tool to visualize $\boldsymbolΩ$. △ Less

Submitted 6 May, 2025; v1 submitted 31 March, 2025; originally announced April 2025.

Realization of strain induced multiple topological phases in Cu$_2$SnS$_3$: An $ab$-$initio$ study

Authors: Prakash Pandey, Sudhir K. Pandey

Abstract: The search of multiple topological phases (TPs) and their transitions by tuning different parameters through chemical substitutions, electric field, magnetic field, strain and Floquet engineering, etc has garnered a widespread attention in recent time. In spite of great effort, the observations of multiple TPs in a single material and multiple TP transitions in the presence of one parameter remain… ▽ More The search of multiple topological phases (TPs) and their transitions by tuning different parameters through chemical substitutions, electric field, magnetic field, strain and Floquet engineering, etc has garnered a widespread attention in recent time. In spite of great effort, the observations of multiple TPs in a single material and multiple TP transitions in the presence of one parameter remain elusive. Here we demonstrate the presence of multiple TPs and their transitions with uniaxial compressive strain (UCS) in orthorhombic Cu$_2$SnS$_3$ by using $state$-$of$-$the$-$art$ $ab$-$initio$ calculations. In the absence of spin-orbit coupling (SOC), the Cu$_2$SnS$_3$ exhibits a single (type-II) nodal-ring and in the presence of SOC, it hosts Weyl phase with seven Weyl points (three at $Γ$ and four at general positions) along with nodal arcs. On the application of UCS, it remains type-II nodal-ring $<5.5$\%, which further evolves into type-III nodal-ring for $5.5\% \leq$ UCS $<5.6$\%. Interestingly, at 5.6\% of UCS, it shows Weyl phase with four Weyl nodes even in the absence of SOC. All the above-mentioned seven Weyl points persist below $5$\% of UCS. For 5\% $\leq$ UCS $<5.6$\%, four Weyl points (at general positions) disappear and nodal-arcs remain intact in all the studied range of UCS. The TPs observed in the absence of SOC appears to arise due to the presence of strain driven topological flat band, which is typically reported to be seen in kagome and Lieb lattices. △ Less

Submitted 18 February, 2025; originally announced February 2025.

Deep Neural Network for Phonon-Assisted Optical Spectra in Semiconductors

Authors: Qiangqiang Gu, Shishir Kumar Pandey, Zhanghao Zhouyin

Abstract: Ab initio based accurate simulation of phonon-assisted optical spectra of semiconductors at finite temperatures remains a formidable challenge, as it requires large supercells for phonon sampling and computationally expensive high-accuracy exchange-correlation (XC) functionals. In this work, we present an efficient approach that combines deep learning tight-binding and potential models to address… ▽ More Ab initio based accurate simulation of phonon-assisted optical spectra of semiconductors at finite temperatures remains a formidable challenge, as it requires large supercells for phonon sampling and computationally expensive high-accuracy exchange-correlation (XC) functionals. In this work, we present an efficient approach that combines deep learning tight-binding and potential models to address this challenge with ab initio fidelity. By leveraging molecular dynamics for atomic configuration sampling and deep learning-enabled rapid Hamiltonian evaluation, our approach enables large-scale simulations of temperature-dependent optical properties using advanced XC functionals (HSE, SCAN). Demonstrated on silicon and gallium arsenide across temperature 100-400 K, the method accurately captures phonon-induced bandgap renormalization and indirect/direct absorption processes which are in excellent agreement with experimental findings over five orders of magnitude. This work establishes a pathway for high-throughput investigation of electron-phonon coupled phenomena in complex materials, overcoming traditional computational limitations arising from large supercell used with computationally expensive XC-functionals. △ Less

Submitted 6 May, 2025; v1 submitted 2 February, 2025; originally announced February 2025.

Comments: 6 pages, 5 figures

Band gap renormalization, carrier mobility and transport in Mg2Si and Ca2Si: Ab-initio scattering and Boltzmann transport equation study

Authors: Vinod Kumar Solet, Sudhir K. Pandey

Abstract: We perform first-principles electron-phonon interaction (EPI) calculations based on many-body perturbation theory to study the temperature-dependent band-gap and charge-carrier transport properties for Mg$_{2}$Si and Ca$_{2}$Si using the Boltzmann transport equation (BTE) under different relaxation-time approximations (RTAs). For a PBE band gap of 0.21 (0.56) eV in Mg$_{2}$Si (Ca$_{2}$Si), a zero-… ▽ More We perform first-principles electron-phonon interaction (EPI) calculations based on many-body perturbation theory to study the temperature-dependent band-gap and charge-carrier transport properties for Mg$_{2}$Si and Ca$_{2}$Si using the Boltzmann transport equation (BTE) under different relaxation-time approximations (RTAs). For a PBE band gap of 0.21 (0.56) eV in Mg$_{2}$Si (Ca$_{2}$Si), a zero-point renormalization correction of 29-33 (37-51) meV is obtained using various approaches, while the gap at 300 K is 0.15-0.154 (0.46-0.5) eV. The electron mobility ($μ_{e}$), with a detailed convergence study at 300 K, is evaluated using linearized (self-energy and momentum RTA, or SERTA and MRTA) and iterative BTE (IBTE) solutions. At 300 K, the $μ_{e}$ values are 351 (100), 573 (197), and 524 (163) cm$^{2}V^{-1}s^{-1}$ from SERTA, MRTA, and IBTE, respectively, for Mg$_{2}$Si (Ca$_{2}$Si). SERTA (MRTA) provides results in better agreement with IBTE at higher (lower) temperatures, while SERTA-derived $μ_{e}$ closely matches experimental $μ_{e}$ values for Mg$_{2}$Si. Thermoelectric (TE) transport coefficients significantly influenced by the choice of RTA, with SERTA and MRTA yielding improved agreement with experimental results compared to constant RTA (CRTA) for Mg$_{2}$Si over an electron concentration range of $10^{17}$ to $10^{20}$ cm$^{-3}$. The lattice thermal conductivity ($κ_{ph}$) at 300 K due to phonon-phonon interactions is estimated to be 22.7 (7.2) W m$^{-1}K^{-1}$ for Mg$_{2}$Si (Ca$_{2}$Si). The highest calculated figure of merit (zT) under CRTA is 0.35 (0.38), which decreases to 0.08 (0.085) when EPI is included using MRTA. This study clearly identifies the critical role of EPI in accurate transport predictions of TE silicides. Finally, we explore strategies to enhance zT by reducing $κ_{ph}$ through nanostructuring and mass-difference scattering. △ Less

Submitted 27 January, 2025; originally announced January 2025.

Understanding the transport behaviour of PbSe: A combined experimental and computational study

Authors: Isha Sihmar, Abhishek Pandey, Vinod Kumar Solet, Neeru Chaudhary, Navdeep Goyal, Sudhir K. Pandey

Abstract: Lead chalcogenides are the promising thermoelectric (TE) materials having narrow band gap. The present work investigates the TE behaviour of PbSe in the temperature range 300-500 K. The transport properties of the sample have been studied using the Abinit and BoltzTrap code. The experimentally observed value of \textit{S} at 300 and 500 K is found to be $\sim$ 198 and 266 $μ$V K$^{-1}$, respective… ▽ More Lead chalcogenides are the promising thermoelectric (TE) materials having narrow band gap. The present work investigates the TE behaviour of PbSe in the temperature range 300-500 K. The transport properties of the sample have been studied using the Abinit and BoltzTrap code. The experimentally observed value of \textit{S} at 300 and 500 K is found to be $\sim$ 198 and 266 $μ$V K$^{-1}$, respectively. The rate of increase in \emph{S} from 300 to 460 (460 to 500) K is found to be $\sim$ 0.4 (0.09). The temperature dependent electrical conductivity \textit{($σ$)} shows the increasing trend, with values of $\sim $ 0.35 $\times $ 10$^{3}$ and $\sim$ 0.58 $\times$ 10$^{3}$ $Ω$$^{-1}$ m$^{-1}$ at 300 and 500 K, respectively. Further, the value of thermal conductivity \textit{($κ$)} at 300 (500) K is found to be 0.74 (1.07) W m$^{-1}$ K$^{-1}$. The value of \textit{$κ$} is found to be increasing upto 460 K and then starts decreasing. The dispersion plot indicates that PbSe is a direct band gap semiconductor with band gap value of 0.16 (0.27) eV considering spin-orbit coupling (without SOC). The partial density of states (PDOS) plot shows that Pb 6p and Se 4p states have a major contribution in the transport properties. The observed and calculated values of \textit{S} gives a good match for SOC case. The calculated \textit{$σ$} and electronic part of thermal conductivity (\textit{$κ{_e}$}) gives good match with the experimental data. The maximum power factor (PF) value of $\sim$ 4.3 $\times$ 10$^{-5}$ W/mK$^{2}$ is observed at 500 K. This work helps in understanding the TE behaviour of PbSe through a novel and insightful alliance of experimental measurements and DFT approach. △ Less

Submitted 8 August, 2024; v1 submitted 7 August, 2024; originally announced August 2024.

Half-metallicity and wandering axis ferromagnetism in Fe$_2$Ti$_{1-x}$Mn$_x$Sn (0 $< x \leq$ 0.3) Heusler Alloys

Authors: Kulbhushan Mishra, Shishir Kumar Pandey, S. Chaudhuri, Rajeev Rawat, P. A. Bhobe

Abstract: We investigate the effect of Mn substitution in Fe$_2$Ti$_{1-x}$Mn$_x$Sn on electronic structure and magnetic and electrical transport properties. The spin-polarized density of states calculations using density-functional theory (DFT) yields a half-metallic ground state in Mn-rich compositions. Localized magnetic moments at Mn sites interacting through the cloud of conduction electrons formed by F… ▽ More We investigate the effect of Mn substitution in Fe$_2$Ti$_{1-x}$Mn$_x$Sn on electronic structure and magnetic and electrical transport properties. The spin-polarized density of states calculations using density-functional theory (DFT) yields a half-metallic ground state in Mn-rich compositions. Localized magnetic moments at Mn sites interacting through the cloud of conduction electrons formed by Fe and Ti atoms are also predicted. Electrical resistivity and magneto-transport measurements reveal a Kondo-like ground state at low temperatures and a peculiar linear negative temperature coefficient of resistance in the high-temperature regime with a predominant electron-phonon scattering mechanism. Analysis of room temperature powder X-ray diffraction data reveals a highly ordered L2$_1$ structure and reduction of antisite disorder upon Mn substitution. The temperature-dependent magnetization measurements reveal distinct features indicative of weak anisotropy in the system. Isothermal magnetization measured as a function of the applied field helps identify the unique magnetic ground state of the half-metallic Fe$_2$Ti$_{1-x}$Mn$_x$Sn composition as a ferromagnet with a wandering axis that distinctively orients in the direction of the applied magnetic field. The measurement of X-ray absorption fine structure (XAFS) reveals that the random anisotropy arises due to the local lattice distortion around Mn atoms in the prepared compositions. Our findings thus provide a new perspective for studying the mechanism of half-metallicity and associated magnetic order in Heuslers. △ Less

Submitted 14 February, 2025; v1 submitted 16 July, 2024; originally announced July 2024.

Comments: 13 pages, 13 figures

Learning local equivariant representations for quantum operators

Authors: Zhanghao Zhouyin, Zixi Gan, MingKang Liu, Shishir Kumar Pandey, Linfeng Zhang, Qiangqiang Gu

Abstract: Predicting quantum operator matrices such as Hamiltonian, overlap, and density matrices in the density functional theory (DFT) framework is crucial for material science. Current methods often focus on individual operators and struggle with efficiency and scalability for large systems. Here we introduce a novel deep learning model, SLEM (strictly localized equivariant message-passing) for predictin… ▽ More Predicting quantum operator matrices such as Hamiltonian, overlap, and density matrices in the density functional theory (DFT) framework is crucial for material science. Current methods often focus on individual operators and struggle with efficiency and scalability for large systems. Here we introduce a novel deep learning model, SLEM (strictly localized equivariant message-passing) for predicting multiple quantum operators, that achieves state-of-the-art accuracy while dramatically improving computational efficiency. SLEM's key innovation is its strict locality-based design for equivariant representations of quantum tensors while preserving physical symmetries. This enables complex many-body dependency without expanding the effective receptive field, leading to superior data efficiency and transferability. Using an innovative SO(2) convolution and invariant overlap parameterization, SLEM reduces the computational complexity of high-order tensor products and is therefore capable of handling systems requiring the $f$ and $g$ orbitals in their basis sets. We demonstrate SLEM's capabilities across diverse 2D and 3D materials, achieving high accuracy even with limited training data. SLEM's design facilitates efficient parallelization, potentially extending DFT simulations to systems with device-level sizes, opening new possibilities for large-scale quantum simulations and high-throughput materials discovery. △ Less

Submitted 24 January, 2025; v1 submitted 8 July, 2024; originally announced July 2024.

Comments: 11 pages, 5 figures and 5 tables

Journal ref: International Conference on Learning Representations (ICLR), 2025

An ab-initio study of nodal-arcs, axial strain's effect on nodal-lines & Weyl nodes and Weyl-contributed Seebeck coefficient in TaAs class of Weyl semimetals

Authors: Vivek Pandey, Sudhir K. Pandey

Abstract: This work verifies the existence of dispersive \textit{nodal-arcs} and their evolution into Weyl nodes under the effect of spin-orbit coupling (SOC) in NbAs & NbP. The obtained features mimic the observations as reported for TaAs & TaP in our previous work. In addition, this work reports that the number of nodes in TaAs class of Weyl semimetals (WSMs) can be altered via creating strain along $a$ o… ▽ More This work verifies the existence of dispersive \textit{nodal-arcs} and their evolution into Weyl nodes under the effect of spin-orbit coupling (SOC) in NbAs & NbP. The obtained features mimic the observations as reported for TaAs & TaP in our previous work. In addition, this work reports that the number of nodes in TaAs class of Weyl semimetals (WSMs) can be altered via creating strain along $a$ or $c$ direction of the crystal. For instance, the number of nodes in NbAs under SOC-effect along with 2% (3%) tensile-strain in $a$ direction is found to be 40 (56) in its full Brillouin zone (BZ). Besides the nodes, such strain are found to have considerable impact on the nodal-lines of these WSMs when effect of SOC is ignored. A 3\% tensile (compressive) strain along the $a$ ($c$) direction leads to the partially merging of nodal-lines (without SOC) in the extended BZ of NbAs \& NbP, which is not observed in TaAs & TaP within the range of -3% to 3% strain. Apart from this, the work discusses the role of Weyl physics in affecting the Seebeck coefficient ($S$) of any WSM. In this direction, it is discussed that how a symmetric Weyl cone, even if tilted, will have no contribution to the $S$ of WSMs. Furthermore, the work highlights the conditions under which a Weyl cone can contribute to the $S$ of a given WSM. Lastly, the discussion of Weyl contribution to $S$ is validated over TaAs class of WSMs via investigating the features of their Weyl cones and calculating the contributions of such cones to the $S$ of these semimetals. The value of $S$ contributed from Weyl cone is found to be as large as $\sim$65 $μ$\textit{V}/\textit{K} below 25 K in case of TaAs. The findings of this work present a possibility of engineering the topological properties of TaAs class of WSMs via creating strain in their crystal. It also makes the picture of Weyl physics impact on the $S$ of WSMs a more clear. △ Less

Submitted 3 April, 2024; v1 submitted 26 March, 2024; originally announced March 2024.

PH-NODE: A DFPT and finite displacement supercell based python code for searching nodes in topological phononic materials

Authors: Prakash Pandey, Sudhir K. Pandey

Abstract: Exploring the topological physics of phonons is fundamentally important for understanding various practical applications. Here, we present a density-functional perturbation theory and finite displacement supercell based Python 3 software package called PH-NODE for efficiently computing phonon nodes present in real material through a first-principle approach. The present version of the code is inte… ▽ More Exploring the topological physics of phonons is fundamentally important for understanding various practical applications. Here, we present a density-functional perturbation theory and finite displacement supercell based Python 3 software package called PH-NODE for efficiently computing phonon nodes present in real material through a first-principle approach. The present version of the code is interfaced with the WIEN2k, Elk, and ABINIT packages. In order to benchmark the code, four different types of materials are considered, which include (i) FeSi, a well-known double-Weyl point; (ii) LiCaAs, a half-Heusler single-type-I Weyl topological phonon (TP); and (iii) ScZn, coexisting nodal-line and nodal-ring TPs; (iv) TiS, six pairs of bulk Weyl nodes. In FeSi, the node points are found at $Γ$(0, 0, 0) and R(0.5, 0.5, 0.5) high symmetric points. Also, there are 21 energy values at which the node points are situated, corresponding to the full Brillouin Zone. For LiCaAs, the previously reported literature claims that there is a node point along the W-X high symmetry direction between the highest longitudinal acoustic and the lowest transverse optical branch, while in our DFT calculations, a gap of 0.17 meV is found. Furthermore, ScZn hosts six nodal-ring TPs phonons at the boundary planes of the Brillouin Zone in the vicinity of the M high-symmetric point. In addition to this, straight-line TPs are also found along the $Γ$-X and $Γ$-R high symmetric directions. Moreover, for TiS, six weyl node points (WP1, WP2, WP3, WP4, WP5 and WP6) are found along H-K high-symmetric direction. The results obtained from the PH-NODE code are in good agreement with the experimentally and theoretically reported data for each material. △ Less

Submitted 19 March, 2024; originally announced March 2024.

Terahertz crystal electric field transitions in a Kondo-lattice antiferromagnet

Authors: Payel Shee, Chia-Jung Yang, Shishir Kumar Pandey, Ashis Kumar Nandy, Ruta Kulkarni, Arumugam Thamizhavel, Manfred Fiebig, Shovon Pal

Abstract: Hybridization between the localized f-electrons and the delocalized conduction electrons together with the crystal electric field (CEF) play a determinant role in governing the many-body ground state of a correlated-electron system. Here, we investigate the low-energy CEF states in CeAg_2Ge_2, a prototype Kondo-lattice antiferromagnet where Kondo correlation is found to exist within the antiferrom… ▽ More Hybridization between the localized f-electrons and the delocalized conduction electrons together with the crystal electric field (CEF) play a determinant role in governing the many-body ground state of a correlated-electron system. Here, we investigate the low-energy CEF states in CeAg_2Ge_2, a prototype Kondo-lattice antiferromagnet where Kondo correlation is found to exist within the antiferromagnetic phase. Using time-domain THz reflection spectroscopy, we show the first direct evidence of two low-energy CEF transitions at 0.6 THz (2.5 meV) and 2.1 THz (8.7 meV). The presence of low-frequency infrared-active phonon modes further manifests as a Fano-modified lineshape of the 2.1 THz CEF conductivity peak. The temporal spectral weights obtained directly from the THz time traces, in addition, corroborate the corresponding CEF temperature scales of the compound. △ Less

Submitted 30 January, 2024; originally announced January 2024.

Comments: 10 pages, 6 figures

Pitfalls of Exchange-Correlation Functionals in Descriptions of Magnetism: Cautionary Tale of the FeRh Alloy

Authors: Shishir Kumar Pandey, Saikat Debnath, Zhanghao Zhouyina, Qiangqiang Gu

Abstract: The magnetic ground state of FeRh is highly sensitive towards the lattice constant. This, in addition to partially filled d-shells of Fe and Rh, posed a significant challenge for Density Functional Theory (DFT) calculations in the past. Here, we have investigated the performance of various exchange-correlation (XC) functionals within the DFT formalism for this challenging binary alloy. We have emp… ▽ More The magnetic ground state of FeRh is highly sensitive towards the lattice constant. This, in addition to partially filled d-shells of Fe and Rh, posed a significant challenge for Density Functional Theory (DFT) calculations in the past. Here, we have investigated the performance of various exchange-correlation (XC) functionals within the DFT formalism for this challenging binary alloy. We have employed Local Spin Density Approximation (LSDA), various Generalized Gradient Approximations (GGAs), and newly developed Strongly Constrained and Appropriately Normed (SCAN) meta-GGA functional. Our results show the limitations of any single functional in capturing the intricate interplay of structural, electronic, and magnetic properties in FeRh. While SCAN can accurately describe some magnetic features and phonon dispersion, it significantly overestimates the Fe-Fe magnetic interactions, leading to an unreasonable magnetic ordering temperature. Conversely, the Perdew-Burke-Ernzerhof (PBE) GGA exhibits the opposite behavior. These findings highlight the challenges in simulating materials with partially filled $d$-shells using DFT, underscoring the crucial need for developing a versatile XC functional that can effectively account for the multifaceted nature of such systems. △ Less

Submitted 23 January, 2024; originally announced January 2024.

Comments: 8 pages, 5 figures

Mg$_{2}$Si and Ca$_{2}$Si semiconductors for photovoltaic applications: Calculations based on density-functional theory and the Bethe-Salpeter equation

Authors: Vinod Kumar Solet, Sudhir K. Pandey

Abstract: We conduct a comprehensive assessment of the electronic and optical properties, as well as photovoltaic (PV) performance parameters for Mg$_{2}$Si and Ca$_{2}$Si using density-functional theory and Bethe-Salpeter equation (BSE) based methods. The band-gap for Mg$_{2}$Si (Ca$_{2}$Si) is found to be in the range of 0.25-0.6 (0.57-0.96) eV when PBE, PBEsol and mBJ functionals are used. In the indepen… ▽ More We conduct a comprehensive assessment of the electronic and optical properties, as well as photovoltaic (PV) performance parameters for Mg$_{2}$Si and Ca$_{2}$Si using density-functional theory and Bethe-Salpeter equation (BSE) based methods. The band-gap for Mg$_{2}$Si (Ca$_{2}$Si) is found to be in the range of 0.25-0.6 (0.57-0.96) eV when PBE, PBEsol and mBJ functionals are used. In the independent-particle approximation (IPA), the real and imaginary parts of dielectric function show maximum values of 50 (16.3) at 2.6 (1.0) eV and 61 (16.2) at $\sim$3.24 (3.4) eV, respectively. Within BSE, these respective values change to 59 (17) at 2.5 (0.86) eV and 65 (16.6) at 2.68 (3.1) eV. The excitonic effect is found to be crucial in understanding the experimental optical spectra of Mg$_{2}$Si. However, this effect is relatively weaker in Ca$_{2}$Si. Present study highlights the importance of different levels of theoretical approximations for obtaining the optical spectroscopy data of silicides with a high level of accuracy. Finally, we have evaluated PV efficiency by using spectroscopic limited maximum efficiency (SLME) calculation. On the top of radiative recombination, we have also incorporated non-radiative carrier recombination at a defect trap state via Shockley-Read-Hall (SRH) mechanism to evaluate the efficiency. Among the studied defects, the interstitial Mg (Si) is identified as the most stable in Mg$_{2}$Si (Ca$_{2}$Si) and this provides SRH lifetime of 2 $μs$ (11.3 $ms$). The estimated maximum SLME using BSE absorption spectrum is 1.3 (31.2)\%, which decreases to 1.2 (28.5)\% due to SRH recombination. The present study suggests that Ca$_{2}$Si (Mg$_{2}$Si) is a potential candidate for single-junction (bottom cell in multi-junction) thin-film PV devices. △ Less

Submitted 1 March, 2025; v1 submitted 10 January, 2024; originally announced January 2024.

Comments: Accepted manuscript in Phys. Rev. Applied

Journal ref: Phys. Rev. Applied 22, 064060 (2024)

Observation of correlation induced metal to half-metal phase transition and large orbital moment in $\mathrm{Sr_2CoO_4}$

Authors: Shivani Bhardwaj, Sudhir K. Pandey

Abstract: We present a detailed mean-field study to address the fundamental discrepancy in the ground state magnetization of $\mathrm{Sr_{2}CoO_{4}}$ (SCO). In contrast to the ferromagnetic metallic ground state obtained from density functional theory (DFT), DFT+$U$ gives three ferromagnetic solutions converging to integer moment values (1, 2 \& 3 $μ_B$/f.u) over a range of $U$. Interestingly, two of the so… ▽ More We present a detailed mean-field study to address the fundamental discrepancy in the ground state magnetization of $\mathrm{Sr_{2}CoO_{4}}$ (SCO). In contrast to the ferromagnetic metallic ground state obtained from density functional theory (DFT), DFT+$U$ gives three ferromagnetic solutions converging to integer moment values (1, 2 \& 3 $μ_B$/f.u) over a range of $U$. Interestingly, two of the solutions are found to exhibit half-metallicity with correspondingly $S$=1/2 and S=3/2 spin states. The half-metallic ferromagnetic state with $S$=3/2 is found to be the ground state solution for SCO. Co atoms show a large deviation from the formal +4 oxidation state indicating the presence of strong covalency effects. Our results suggest a plausible metal to half-metal phase transition around $U$($J$)=4.4(1.16) eV. The Fermi surface study shows gradual collapse in states leading to half-metallicity suggesting \textit{\textbf{k}}-dependence of effective $U$ around the critical region. Surprisingly, in the presence of spin-orbit coupling (SOC), unexpectedly large orbital moment ($L_{z}$=0.6) is noted in SCO putting it among the class of 3$d$ based transition metal compounds exhibiting pronounced orbital magnetization. The calculations give large magnetocrystalline anisotropy energy (MAE) of $\sim$48 meV. Large values of orbital magnetic moment contribution and MAE, in the presence of strong correlation effects, provide a better interpretation of experimental magnetization observed in SCO. △ Less

Submitted 10 January, 2024; originally announced January 2024.

Exploring the effect of strong electronic correlations in Seebeck Coefficient of the NdCoO3 compound : Using experimental and DFT+U approach

Authors: Abhishek Pandey, Sudhir K. Pandey

Abstract: The presence of complexity in the electronic structure of strongly correlated electron system NdCoO$_3$ (NCO) have sparked interest in the investigation of its physical properties. Here, we study the the Seebeck coefficient ($α$) of NCO by using the combined experimental and DFT+$U$ based methods. The experimentally measured $α$ is found to be $\sim$ 444 $μV/K$ at 300 K, which decreases to 109.8… ▽ More The presence of complexity in the electronic structure of strongly correlated electron system NdCoO$_3$ (NCO) have sparked interest in the investigation of its physical properties. Here, we study the the Seebeck coefficient ($α$) of NCO by using the combined experimental and DFT+$U$ based methods. The experimentally measured $α$ is found to be $\sim$ 444 $μV/K$ at 300 K, which decreases to 109.8 $μV/K$ at 600 K. In order to understand the measured $α$, we have calculated the PDOS and band structure of the NCO. Furthermore, the calculated occupancy of 6.4 for Co $3d$ orbitals and presence of large unoccupied O $2p$ states indicate the covalent nature of the bonding. Apart from this, the maximum effective mass is found to be 36.75 (28.13) for the spin-up (dn) channel in conduction band indicates the n-type behaviour of the compound in contrast to our experimentally observed p-type behaviour. While, the calculated $α$ at the temperature-dependent chemical potential ($μ$) at 300 K shows the p-type behaviour of the compound. Fairly good agreement is seen between the calculated and measured values of $α$ at U$_f$$_f$ = 5.5 eV and U$_d$$_d$ = 2.7 eV. The maximum power factor (PF) is found to be 47.6 (114.4) $\times$ $10^1$$^4 $ $μ$$W$$K^-$$^2$$cm^-$$^1$$s^-$$^1$ at 1100 K, which corresponds to p (n)-type doping of $\sim$ 1.4 (0.7) $\times$ 10$^2$$^1$ cm$^-$$^3$. This study suggests the importance of strong on-site electron correlation in understanding the thermoelectric property of the compound. △ Less

Submitted 16 December, 2023; originally announced December 2023.

Ab initio investigation of the lattice dynamics and thermophysical properties of BCC Vanadium and Niobium

Authors: Prakash Pandey, Sudhir K. Pandey

Abstract: In the present work, we have performed the phonon dispersion calculations of body-centered cubic Vanadium (V) and Niobium (Nb) with the supercell approach using different supercell size. Using DFT method, the calculated phonon spectra of V and Nb are found to be in a good agreement with the available experimental data. Our calculated results show a \enquote{dip}-like feature in the longitudinal ac… ▽ More In the present work, we have performed the phonon dispersion calculations of body-centered cubic Vanadium (V) and Niobium (Nb) with the supercell approach using different supercell size. Using DFT method, the calculated phonon spectra of V and Nb are found to be in a good agreement with the available experimental data. Our calculated results show a \enquote{dip}-like feature in the longitudinal acoustic phonon mode along the $Γ$-H high symmetric path for both transition metals in the case of supercell size 4$\times$4$\times$4. However, in supercell size 2$\times$2$\times$2 and 3$\times$3$\times$3, the \enquote{dip}-like feature is not clearly visible. In addition to this, thermodynamical properties are also computed, which compare well with the experimental data. Apart from this, the phonon lifetime due to electron-phonon interactions ($τ_{\rm{eph}}^{\rm{ph}}$) and phonon-phonon interactions ($τ_{\rm{ph}}^{\rm{ph}}$) are calculated. The effect of phonon-phonon interactions (PPI) is studied by computing the average phonon lifetime for all acoustic branches. The value of $τ_{\rm{eph}}^{\rm{ph}}$ of V (Nb) is found to be 23.16 (24.70)$\times 10^{-15}$ s at $100$ K, which gets decreased to 1.51 (1.85)$\times 10^{-15}$ s at 1000 K. The $τ_{\rm{ph}}^{\rm{ph}}$ of V (Nb) is found to be 8.59 (18.09)$\times 10^{-12}$ and 0.83 (1.76)$\times 10^{-12}$ s at 100 and 1000 K, respectively. Nextly, the lattice thermal conductivity is computed using linearized phonon Boltzmann equation. The present work suggests that studying the variation of phonon dispersion with supercell size is crucial for understanding the phonon properties of solids accurately. △ Less

Submitted 15 September, 2023; originally announced September 2023.

Lattice dynamics related properties of Nickel: A comparative DFT and DFT+U study

Authors: Shivani Bhardwaj, Sudhir K. Pandey

Abstract: The simultaneous influence of electronic correlations and magnetic ordering on the theoretical estimation of phonons and related properties of Ni is investigated. The work includes a comparative DFT and DFT+U study, where on-site Coulomb interaction parameter for 3$d$ electrons, $U$($U_{full}$)= 0.516 eV obatined from constarined random phase approximation (cRPA) calculations, is considered for DF… ▽ More The simultaneous influence of electronic correlations and magnetic ordering on the theoretical estimation of phonons and related properties of Ni is investigated. The work includes a comparative DFT and DFT+U study, where on-site Coulomb interaction parameter for 3$d$ electrons, $U$($U_{full}$)= 0.516 eV obatined from constarined random phase approximation (cRPA) calculations, is considered for DFT+U calculations. The analysis of phonon frequency estimates along high symmetric k-directions and sampled full-BZ (Brillouin zone) using Frozen phonon displacement method suggests the importance of both on-site Coulomb correlations and magnetism to account for the experimental frequencies. Further, prominent role of both the aspects is observed in the derived thermodynamic properties - Free-energy, specific heat \& entropy, within quasi-harmonic approximation (QHA) specially at high temperatures. The temperature dependent evaluation of thermal expansion coefficient($α$) and phonon density of states is performed together with the equilibrium elastic constants. The results obtained for Ni, suggest the significance of electronic energy correction due to both on-site Coulomb correlations and magnetic phase incorporation, to account for realistic description of experimental findings. This study realizes the inevitable role of correlation effects in studying the phononic properties of a correlated transition metal, hence directing a way to explore various other correlated electron systems for their lattice dynamics. △ Less

Submitted 12 July, 2023; originally announced July 2023.

Deep learning tight-binding approach for large-scale electronic simulations at finite temperatures with $ab$ $initio$ accuracy

Authors: Qiangqiang Gu, Zhanghao Zhouyin, Shishir Kumar Pandey, Peng Zhang, Linfeng Zhang, Weinan E

Abstract: Simulating electronic behavior in materials and devices with realistic large system sizes remains a formidable task within the $ab$ $initio$ framework due to its computational intensity. Here we show DeePTB, an efficient deep learning-based tight-binding approach with $ab$ $initio$ accuracy to address this issue. By training on structural data and corresponding $ab$ $initio$ eigenvalues, the DeePT… ▽ More Simulating electronic behavior in materials and devices with realistic large system sizes remains a formidable task within the $ab$ $initio$ framework due to its computational intensity. Here we show DeePTB, an efficient deep learning-based tight-binding approach with $ab$ $initio$ accuracy to address this issue. By training on structural data and corresponding $ab$ $initio$ eigenvalues, the DeePTB model can efficiently predict tight-binding Hamiltonians for unseen structures, enabling efficient simulations of large-size systems under external perturbations such as finite temperatures and strain. This capability is vital for semiconductor band gap engineering and materials design. When combined with molecular dynamics, DeePTB facilitates efficient and accurate finite-temperature simulations of both atomic and electronic behavior simultaneously. This is demonstrated by computing the temperature-dependent electronic properties of a gallium phosphide system with $10^6$ atoms. The availability of DeePTB bridges the gap between accuracy and scalability in electronic simulations, potentially advancing materials science and related fields by enabling large-scale electronic structure calculations. △ Less

Submitted 13 November, 2024; v1 submitted 10 July, 2023; originally announced July 2023.

Comments: 15 pages, 8 figures

Journal ref: Nat. Commun. 15, 6772 (2024)

Existence of nodal-arc and its evolution into Weyl-nodes in the presence of spin-orbit coupling in TaAs & TaP

Authors: Vivek Pandey, Sudhir K. Pandey

Abstract: In this work, we report the existence of nodal-arc, which acts as the building block of all the nodal-rings in TaAs & TaP. This nodal-arc is found to be capable of generating all the nodal-rings in these materials upon the application of space-group symmetry operations including time-reversal symmetry. The arcs are obtained to be dispersive with the energy spread of $\sim$109 ($\sim$204) meV in Ta… ▽ More In this work, we report the existence of nodal-arc, which acts as the building block of all the nodal-rings in TaAs & TaP. This nodal-arc is found to be capable of generating all the nodal-rings in these materials upon the application of space-group symmetry operations including time-reversal symmetry. The arcs are obtained to be dispersive with the energy spread of $\sim$109 ($\sim$204) meV in TaAs (TaP). Also, the orbitals leading to bands-inversion and thus the formation of nodal-arcs are found to be Ta-5d & As-4p (P-3p) in TaAs (TaP). The area of nodal-rings is found to be highly sensitive to the change in hybridization-strength, where the increase in hybridization-strength leads to the decrease in the area of nodal-rings. In the presence of spin-orbit coupling (SOC), all the points on these arcs get gaped-up and two pairs of Weyl-nodes are found to evolve from them. Out of the two pair, one is found to be situated close to the joining point of the two arcs forming a ring. This causes the evolution of each nodal-ring into three pairs of Weyl-nodes. The coordinates of these Weyl-nodes are found to be robust to the increase in SOC-strength from $\sim$ 0.7-3.5 eV. All the results are obtained at the first-principle level. This work provides a clear picture of the existence of nodal-arc due to accidental degeneracy and its evolution into Weyl-nodes under the effect of SOC. △ Less

Submitted 11 August, 2023; v1 submitted 22 May, 2023; originally announced May 2023.

Computational exploration of a viable route to Kitaev-quantum spin liquid phase in OsCl$_3$

Authors: Qiangqiang Gu, Shishir Kumar Pandey, Yihao Lin

Abstract: In this computational study, we explore a viable route to access the Kitaev-Quantum Spin Liquid (QSL) state in recently synthesized monolayer of a so-called spin-orbit assisted Mott insulator OsCl$_3$. In addition to other magnetic ground states in different regions, the small $J_\text{H}$/$U$ region of our Hubbard $U$--Hund's $J_\text{H}$ quantum phase diagram, obtained by combining second-order… ▽ More In this computational study, we explore a viable route to access the Kitaev-Quantum Spin Liquid (QSL) state in recently synthesized monolayer of a so-called spin-orbit assisted Mott insulator OsCl$_3$. In addition to other magnetic ground states in different regions, the small $J_\text{H}$/$U$ region of our Hubbard $U$--Hund's $J_\text{H}$ quantum phase diagram, obtained by combining second-order perturbation and pseudo-Fermion renormalization group calculations, hosts Kitaev-QSL phase. Only Kitaev interaction of a smaller magnitude is obtained in this region. Negligibly small farther neighbor interactions appear as a distinct feature of monolayer \os, suggesting this material to be a better candidate for the exploration of possible Kitaev-QSL state than earlier proposed materials. Insights from our study might be useful to probe magnetic phase transitions by purportedly manipulating $U$ and $J_\text{H}$ with epitaxial strain in advanced crystal growth techniques. △ Less

Submitted 4 June, 2023; v1 submitted 9 April, 2023; originally announced April 2023.

Journal ref: Phys. Rev. Res. 6, 043309 (2024)

Ab-initio study of phononic thermal conduction in ScAgC half-Heusler

Authors: Vinod Kumar Solet, Sudhir Kumar Pandey

Abstract: We present a first-principles lattice calculations to comprehend the thermal expansion $α(T)$ and lattice thermal conductivity $κ_{ph}$ of ScAgC. The obtained positive frequencies of phonon dispersion shows the dynamical stability of ScAgC in FCC structure. The estimated $α(T)$ from quasi-harmonic approximation (QHA) at 300(1200) K is $\sim$4(4.6)$\times$$10^{-6}$ K$^{-1}$. The predicted value of… ▽ More We present a first-principles lattice calculations to comprehend the thermal expansion $α(T)$ and lattice thermal conductivity $κ_{ph}$ of ScAgC. The obtained positive frequencies of phonon dispersion shows the dynamical stability of ScAgC in FCC structure. The estimated $α(T)$ from quasi-harmonic approximation (QHA) at 300(1200) K is $\sim$4(4.6)$\times$$10^{-6}$ K$^{-1}$. The predicted value of total $κ_{ph}$ from phonon-phonon interaction (PPI) at 300(1200) K is $\sim$7.4(1.8) Wm$^{-1}$K$^{-1}$. The highest group velocity for acoustic $\&$ optical branches (AB $\&$ OB) is $\sim$6.7 and $\sim$3.5 km/s, respectively. The predicted average phonon lifetime ($τ_λ$) for AB(OB) is $\sim$2.5(1.65) ps at 300 K, whereas it is $\sim$0.6(0.4) ps at 1200 K. The estimated highest heat capacity ($C_λ$) at 200 K for AB(OB) is $\sim$23.5 (19.5) meV/K. We fitted the equation $A_κ$T$^{-x_κ}$($A_τ$T$^{-x_τ}$) in the $κ_{ph}$($τ_λ$) curve to gain a thorough understanding of temperature-dependent $κ_{ph}$ trend. The $x_κ$ for total branches is calculated to be $\sim$1.02. The $x_τ$ value due to total AB(OB) is estimated to be $\sim$1.04(1.02), while it is $\sim$1.03 for total branches. The calculated $x_κ$ for total AB(OB) is $\sim$1.04(0.95), implying that AB contributes more to the total $κ_{ph}$. This research could be important for enhancing the properties of ScAgC regarding thermoelectric and photovoltaic applications. △ Less

Submitted 1 March, 2025; v1 submitted 3 January, 2023; originally announced January 2023.

Comments: Accepted manuscript in EPJB

Journal ref: Eur. Phys. J. B 96, 53 (2023)

Investigating the effect of electronic correlation on transport properties and phononic states of Vanadium

Authors: Prakash Pandey, Vivek Pandey, Sudhir K. Pandey

Abstract: In the present work, we have tried to investigate the importance of electronic correlation on transport properties and phononic states of Vanadium (V). The temperature-dependent electrical resistivity ($ρ$) and electronic part of thermal conductivity ($κ_e$) due to electron-electron interactions (EEIs) and electron-phonon interactions (EPIs) are computed. The values of $ρ$ due to EEIs are found to… ▽ More In the present work, we have tried to investigate the importance of electronic correlation on transport properties and phononic states of Vanadium (V). The temperature-dependent electrical resistivity ($ρ$) and electronic part of thermal conductivity ($κ_e$) due to electron-electron interactions (EEIs) and electron-phonon interactions (EPIs) are computed. The values of $ρ$ due to EEIs are found to be extremely small in comparison to $ρ$ due to EPIs. For instance, at 300 K, the calculated value of $ρ$ due to EEIs (EPIs) is $\sim$ 0.859$\times10^{-3}$ ($\sim$ 0.20) $μΩ$m. The magnitudes of $κ_e$ due to EPIs are found to be in good agreement with the experimental results. These observations indicate the negligible importance of EEIs to these quantities for V. However, at 300 K, the value of Seebeck coefficient ($S$) at DFT+DMFT level ($\sim$ -0.547 $μ$VK$^{-1}$) is found to be entirely different than at DFT level ($\sim 7.401$ $μ$VK$^{-1}$). Also, the DFT+DMFT value of $S$ at 300 K is in good match with the available experimental data (-1.06 $μ$VK$^{-1}$, 1.0 $μ$VK$^{-1}$). Apart from this, the study of phononic states at DFT and DFT+DMFT level is performed. The obtained phononic band structure and phonon DOS at DFT+DMFT differ to a good extent from that at DFT. The maximum energy of phononic state obtained at DFT (DFT+DMFT) is $\sim$ 33.83 ($\sim$ 35.15) meV, where the result of DFT+DMFT is obtained more closer to the experimental data (35.15, 36.98 & 41.77 meV). These results highlight the importance of electronic correlation on $S$ & phononic states of simple correlated V metal. △ Less

Submitted 9 September, 2023; v1 submitted 26 November, 2022; originally announced November 2022.

A computational method to estimate spin-orbital interaction strength in solid state systems

Authors: Qiangqiang Gu, Shishir Kumar Pandey

Abstract: Spin-orbit coupling (SOC) drives interesting and non-trivial phenomena in solid state physics, ranging from topological to magnetic to transport properties. Thorough study of such phenomena often require effective models where SOC term is explicitly included. However, estimation of SOC strength for such models mostly depend on the spectroscopy experiments which can only provide a rough estimate. I… ▽ More Spin-orbit coupling (SOC) drives interesting and non-trivial phenomena in solid state physics, ranging from topological to magnetic to transport properties. Thorough study of such phenomena often require effective models where SOC term is explicitly included. However, estimation of SOC strength for such models mostly depend on the spectroscopy experiments which can only provide a rough estimate. In this work, we provide a simple yet effective computational approach to estimate the on-site SOC strength using a combination of the $ab$ $initio$ and tight-binding calculations. We demonstrate the wider applicability and high sensitivity of our method considering materials with varying SOC strengths and the number of SOC active ions. The estimated SOC strengths agree well with the proposed values in literature lending support to our methodology. This simplistic approach can readily be applied to a wide range of materials. △ Less

Submitted 14 November, 2022; originally announced November 2022.

Comments: 6 pages, 3 figures

Possible realization of three-dimensional quantum spin liquid behavior in HoVO4

Authors: Dheeraj Ranaut, Shivprasad S. Shastri, Sudhir K. Pandey, K. Mukherjee

Abstract: The study of geometrically frustrated magnetic systems with unusual crystal field ground states offers a possibility of realizing the new aspects of physics of disordered systems. In this study, we report our results of structural, magnetic susceptibility, heat capacity measurements, along with density functional theory calculations on HoVO4; a compound in which the presence of a distorted kind of… ▽ More The study of geometrically frustrated magnetic systems with unusual crystal field ground states offers a possibility of realizing the new aspects of physics of disordered systems. In this study, we report our results of structural, magnetic susceptibility, heat capacity measurements, along with density functional theory calculations on HoVO4; a compound in which the presence of a distorted kind of HoO8 polyhedral leads to multiple magnetic interaction paths. The observed broad maximum below 10 K in the temperature response of DC susceptibility curves implies the presence of short-range correlations. AC susceptibility rules out the possibility of any kind of spin freezing. Temperature dependent heat capacity measurement at zero field indicate towards the absence of long-range ordering, along with the presence of a broad maximum centered around 14 K. The residual heat capacity exhibits a characteristic power-law (Tα) behavior with the exponent α nearly equal to 2, which is analogous to that observed for other 3D quantum spin liquid systems. The density functional theory calculations signify the presence of dominant second and third nearest neighbor interactions, which in turn lead to magnetic frustration in our system. Our investigations suggest that HoVO4 can be a candidate for realizing a 3D quantum spin liquid state. △ Less

Submitted 4 October, 2022; originally announced October 2022.

Comments: Accepted in J. Phys. Condens. Matter

Enhanced Pauli spin response, failure of Stoner \& spin fluctuation models, and presence of 6 $eV$ plasmonic excitations in Ni metal

Authors: Shivani Bhardwaj, Antik Sihi, Sudhir K. Pandey

Abstract: We revisit the electronic structure of Ni, using the density functional theory (DFT) and dynamical mean-field theory (DMFT) for the theoretical description of its electronic structure properties along with finite-temperature magnetism. Our study provides a comprehensive account of electronic and magnetic properties with the same set of Coulomb interaction parameters, $U$($J$)=5.78(1.1) $eV$ calcul… ▽ More We revisit the electronic structure of Ni, using the density functional theory (DFT) and dynamical mean-field theory (DMFT) for the theoretical description of its electronic structure properties along with finite-temperature magnetism. Our study provides a comprehensive account of electronic and magnetic properties with the same set of Coulomb interaction parameters, $U$($J$)=5.78(1.1) $eV$ calculated using first-principles approach. The nature of theoretical magnetization curves obtained from DFT \& DFT+DMFT as well as the experimental curve show deviation from the standard models of magnetism, $viz$ Stoner and spin fluctuation model. The temperature dependent DFT approach is found to well describe the finite-temperature M(T) of Ni below critical temperature ($T$ $\leq$ 631 K). The study finds significant Pauli-spin susceptibility contribution to paramagnetic spin susceptibility. Excluding the Pauli-spin response yields a linear Curie-Weiss dependence of the inverse paramagnetic susceptibility at higher temperatures. Also, the presence of mixed valence electronic configuration (3$d^8$, 3$d^9$ and 3$d^7$) is noted. The competing degrees of both the itinerant and localized moment picture of 3$d$ states are found to dictate the finite-temperature magnetization of the system. Furthermore, the quasiparticle scattering rate is found to exhibit strong deviation from $T^2$ behavior in temperature leading to the breakdown of conventional Fermi-liquid theory. In addition to the 6 $eV$ feature, our calculated electronic excitation spectrum confirms the satellite feature extending $\sim$10 $eV$ binding energy, being consistent with experimental observation. Interestingly, our $G_0W_0$ results find the presence of plasmonic excitation contribution to the intensity of famous 6 $eV$ satellite along with the electronic correlation effects,paving way for its reinterpretation. △ Less

Submitted 1 September, 2024; v1 submitted 25 August, 2022; originally announced August 2022.

First-principles study of optoelectronic and thermoelectronic properties of the ScAgC half-Heusler compound

Authors: Vinod Kumar Solet, Shamim Sk, Sudhir K. Pandey

Abstract: Here, we present a theoretical study in the context of photovoltaic (PV) and thermoelectric (TE) applications of ScAgC. The electronic, optical, and thermoelectric properties have been investigated systematically using density functional theory (DFT) and semi-classical Boltzmann transport theory. DFT calculates a direct band gap of 0.47 eV, whereas the $G_{0}W_{0}$ method estimates a band gap of 1… ▽ More Here, we present a theoretical study in the context of photovoltaic (PV) and thermoelectric (TE) applications of ScAgC. The electronic, optical, and thermoelectric properties have been investigated systematically using density functional theory (DFT) and semi-classical Boltzmann transport theory. DFT calculates a direct band gap of 0.47 eV, whereas the $G_{0}W_{0}$ method estimates a band gap of 1.01 eV. We used parabola fitting to estimate the effective mass values for bands B1 to B4 at $Γ$-point, which are -0.087 (-0.075), -0.17 (-0.27), -0.17 (-0.27), and 0.049 (0.058) along the $Γ$-$X$ ($Γ$-$L$) direction, respectively. Furthermore, the optoelectronic properties are calculated and analyzed over an energy range of 0 to 10 eV. The optical conductivity, refractive index, and dielectric function show strong optical transitions in the visible region. The lowest calculated reflectivity is 0.24 at 4.7 eV, and the highest calculated value of the absorption coefficient is $1.7\times10^{6}$ cm$^{-1}$ at $8.5$ eV. At 300 K, we expect a maximum solar efficiency (SLME) of 33\% at a thickness of $1~μ$m. The lattice part of the thermal conductivity shows a maximum value of 3.8 Wm$^{-1}$K$^{-1}$ at $1200$ K. At 1200 K, for electron doping of $3.9\times10^{21}$ cm$^{-3}$, the maximum value of $S^{2}σ/τ$ is $145 \times 10^{14}$ $μ$WK$^{-2}$cm$^{-1}$s$^{-1}$, while for hole doping of $1.5\times10^{21}$ cm$^{-3}$, it is $123 \times 10^{14}$ $μ$WK$^{-2}$cm$^{-1}$s$^{-1}$. The highest $ZT$ at $1200$ K is expected to be $0.53$, whereas the optimal efficiency is predicted to be $8.5\%$ for cold and hot temperatures of $300$ K and $1200$ K, respectively. The collected results suggest that the ScAgC compound is a potential candidate for renewable energy sources such as solar cell and TE applications △ Less

Submitted 4 March, 2025; v1 submitted 12 July, 2022; originally announced July 2022.

Comments: 14 pages, 11 figures (To appear in Phys. Scr.)

Journal ref: Phys. Scr. 97, 105711 (2022)

Emergence of bond-dependent highly anisotropic magnetic interactions in Sr$_4$RhO$_6$: a theoretical study

Authors: Shishir Kumar Pandey, Qiangqiang Gu, Yihao Lin, Rajarshi Tiwari, Ji Feng

Abstract: The quantum spin liquid states as a natural ground state of the Kitaev model has led to a quest for new materials candidates hosting Kitaev physics. Yet, there are very few material candidates in this category. Using a combination of $ab$ $initio$ and model Hamiltonian methods, we propose that Ruddlesden-Popper compound Sr$_4$RhO$_6$ belongs to this category. With a tight-binding model and exact d… ▽ More The quantum spin liquid states as a natural ground state of the Kitaev model has led to a quest for new materials candidates hosting Kitaev physics. Yet, there are very few material candidates in this category. Using a combination of $ab$ $initio$ and model Hamiltonian methods, we propose that Ruddlesden-Popper compound Sr$_4$RhO$_6$ belongs to this category. With a tight-binding model and exact diagonalization approach, we show that despite substantial trigonal-like distortion, the electronic and magnetic properties of Sr$_4$RhO$_6$ can be well described in terms of pseudo-spin = 1/2 states. Magnetic interactions among pseudo-spins, estimated using the second-order perturbation method are highly bond-dependent anisotropic in nature with two particularly noticeable features, antiferromagnetic Kitaev and Dzyaloshinskii-Moriya interactions. The gaped spin-wave spectra of Sr$_4$RhO$_6$ obtained with linear spin-wave theory is consistent with the underlying magnetic frustration. Additional analysis of the role of individual or a particular combination of magnetic interactions reveals that the spin-wave spectra of Sr$_4$RhO$_6$ is a combined effect of the highly anisotropic interactions and a relatively simpler minimal model may not be plausible in the current case. The crucial insights about coupling between the local structural features and magnetic properties of Sr$_4$RhO$_6$ obtained in this study may be helpful for future studies belonging to this class. △ Less

Submitted 19 December, 2022; v1 submitted 11 July, 2022; originally announced July 2022.

First-principles evidence of type-II Weyl phonons in rock-salt Tin Chalcogenides (SnS, SnSe & SnTe) materials

Authors: Antik Sihi, Sudhir K. Pandey

Abstract: Recent studies on different topological materials in condensed matter physics have provided the evidence of topological nature for bosonic particle like phonons by performing various theoretical calculations and experimental observations. Here, the topological behaviours of phonons of SnS, SnSe and SnTe materials in rock-salt structure are investigated using $ab$-$initio$ methodology. For all thes… ▽ More Recent studies on different topological materials in condensed matter physics have provided the evidence of topological nature for bosonic particle like phonons by performing various theoretical calculations and experimental observations. Here, the topological behaviours of phonons of SnS, SnSe and SnTe materials in rock-salt structure are investigated using $ab$-$initio$ methodology. For all these materials, the tilted linear band touching is observed along with the presence of band inversion in direction X-W. The topological point in phonon dispersion curve along X-W direction is found to be $\sim$2.83, $\sim$2.46 and $\sim$2.51 THz for SnS, SnSe and SnTe, respectively. The calculated numbers of Weyl points (WPs) is estimated to be 56, 24 and 54 for SnS, SnSe and SnTe, respectively. These WPs have shown conserved Chiral charges for all corresponding materials. The surface local density of states is computed for these compounds, where the surface arc is clearly seen. In case of SnS, the surface arc is found at 2.0 - 2.2 THz energy region. Also, the isofrequency surface states are investigated to observe the presence of Fermi arc for SnX (X = S, Se, Te). The present first-principles calculation predicts that SnS, SnSe and SnTe show type-II Weyl phononic behaviour along with evidence of topological phononic surface states. △ Less

Submitted 8 May, 2022; originally announced May 2022.

Spin interaction and magnetism in cobaltate Kitaev candidate materials: an $ab$ $initio$ and model Hamiltonian approach

Authors: Shishir Kumar Pandey, Ji Feng

Abstract: In the quest for materials hosting Kitaev spin liquids, much of the efforts have been focused on the fourth- and fifth-row transition metal compounds, which are spin-orbit coupling assisted Mott insulators. Here, we study the structural and magnetic properties of 3$d$ transition metal oxides, Na$_2$Co$_2$TeO$_6$ and Na$_3$Co$_2$SbO$_6$. The partial occupancy of sodium in former compound is address… ▽ More In the quest for materials hosting Kitaev spin liquids, much of the efforts have been focused on the fourth- and fifth-row transition metal compounds, which are spin-orbit coupling assisted Mott insulators. Here, we study the structural and magnetic properties of 3$d$ transition metal oxides, Na$_2$Co$_2$TeO$_6$ and Na$_3$Co$_2$SbO$_6$. The partial occupancy of sodium in former compound is addressed using a cluster expansion, and a honeycomb lattice of sodiums is found to be energetically favored. Starting from the \textit{ab initio} band structures, a many-body second order perturbation theory leads to a pseudospin-$\frac{1}{2}$ Hamiltonian with estimated magnetic interactions. We show that the experimentally observed zigzag magnetic state is stabilized only when the first neighbor Kitaev coupling dominates over the Heisenberg term, both of which are highly suppressed due to presence of $e_g$ orbitals. A third neighbor Heisenberg interaction is found dominant in both these compounds. We also present a phase diagram for Na$_2$Co$_2$TeO$_6$ by varying the electron-electron and spin-orbit interactions. The computed spin excitation spectra are found to capture essential features of recent experimental magnon spectrum, lending support to our results. △ Less

Submitted 31 October, 2022; v1 submitted 8 May, 2022; originally announced May 2022.

Journal ref: Phys. Rev. B, 106, 174411, 2022

Evidence of phase stability, topological phonon and temperature-induced topological phase transition in rocksalt SnS and SnSe

Authors: Antik Sihi, Sudhir K. Pandey

Abstract: Both SnS and SnSe have been experimentally and theoretically confirmed as topological crystalline insulators in native rocksalt structure. Here, phononic structure, thermodynamical properties and temperature dependent electron-phonon interaction (EPI) have investigated for both the materials in rocksalt phase. Previously performed theoretical studies have predicted the phase instability of SnS in… ▽ More Both SnS and SnSe have been experimentally and theoretically confirmed as topological crystalline insulators in native rocksalt structure. Here, phononic structure, thermodynamical properties and temperature dependent electron-phonon interaction (EPI) have investigated for both the materials in rocksalt phase. Previously performed theoretical studies have predicted the phase instability of SnS in this crystal structure at ambient condition. But, after a detailed study performing on the phonon calculation of SnS, we have predicted the phase stability of SnS with considering the Sn 4$p$ orbitals as valence states in $ab-initio$ calculation. The importance of long range Coulomb forces along with the themodynamical properties are also described in detailed for both materials. The preliminary evidence of topological phonon is found along X-W direction, where the linear band touching is observed as compared to type II Weyl phononic material ZnSe. The topological phase transition is seen for these materials due to EPI, where non-linear temperature dependent bandgap is estimated. The predicted value of transition temperature for SnS (SnSe) is found to be $\sim$700 K, where after this temperature the non-trivial to trivial topological phase is seen. The strength of EPI shows more stronger impact on the electronic structure of SnS than SnSe material. The reason of non-linear behaviour of bandgap with rise in temperature is discussed with the help of temperature dependent linewidths and lineshifts of conduction band and valence band due to EPI. The present study reveals the phase stability of SnS along with the comparative study of thermal effect on EPI of SnS and SnSe. Further, the possibility of temperature induced topological phase transition provides one of important behaviour to apply these two materials for device making application. △ Less

Submitted 26 April, 2022; originally announced April 2022.

Journal ref: J. Phys.: Condens. Matter 34 325601 (2022)

Density functional study of thermodynamic properties, thermal expansion and lattice thermal conductivity of Fe$_{2}$VAl at high temperature region

Authors: Shamim Sk, Sudhir K. Pandey

Abstract: Here, we present the phonon calculations for thermodynamic properties, thermal expansion and lattice thermal conductivity of Fe$_{2}$VAl in the temperature range of $300-800$ K and compared with existing experiment. Phonon dispersion is computed using finite displacement method and supercell approach. The positive frequencies of all the phonon modes indicate the mechanical stability of the compoun… ▽ More Here, we present the phonon calculations for thermodynamic properties, thermal expansion and lattice thermal conductivity of Fe$_{2}$VAl in the temperature range of $300-800$ K and compared with existing experiment. Phonon dispersion is computed using finite displacement method and supercell approach. The positive frequencies of all the phonon modes indicate the mechanical stability of the compound. The specific heat at constant volume and Helmholtz free energy are calculated under harmonic approximation, while calculation of thermal expansion is done under quasi-harmonic approximation. Lattice thermal conductivity ($κ_{L}$) is calculated using first-principle anharmonic lattice dynamics calculations. The zero-point energy and Debye temperature are computed as $\sim$21 kJ/mol and 638 K, respectively. The calculated thermal expansions are found to be $\sim$6.3 $\times$ 10$^{-6}$ K$^{-1}$ and $\sim$7.2 $\times$ 10$^{-6}$ K$^{-1}$ at 300 and 800 K, respectively. A significant deviation between calculated ($\sim$48.6 W/m-K) and experimental ($\sim$22.8 W/m-K) values of $κ_{L}$ are observed at 300 K. But, as the temperature increases, the calculated and experimental $κ_{L}$ come closer with the corresponding values of $\sim$18.2 W/m-K and $\sim$11.0 W/m-K at 800. The possible reasons for the deviation of $κ_{L}$ are addressed. The temperature dependent of phonon lifetime is computed in order to understand the feature of $κ_{L}$. Present study suggests that DFT based phononic calculations provide reasonably good explanations of available experimental phonon related properties of Fe$_{2}$VAl in the high temperature range of $300-800$ K. △ Less

Submitted 24 April, 2022; originally announced April 2022.

Thermoelectric properties of Fe$_{2}$VAl at high temperature region: A combined experimental and theoretical study

Authors: Shamim Sk, P. Devi, Sanjay Singh, Sudhir K. Pandey

Abstract: Heusler type compounds have long been recognized as potential thermoelectric (TE) materials. Here, the experimentally observed TE properties of Fe$_{2}$VAl are understood through electronic structure calculations in the temperature range of $300-800$ K. The observed value of $S$ is $\sim-$138 $μ$V/K at 300 K. Then, the $|S|$ decreases with increase in temperature up to the highest temperature with… ▽ More Heusler type compounds have long been recognized as potential thermoelectric (TE) materials. Here, the experimentally observed TE properties of Fe$_{2}$VAl are understood through electronic structure calculations in the temperature range of $300-800$ K. The observed value of $S$ is $\sim-$138 $μ$V/K at 300 K. Then, the $|S|$ decreases with increase in temperature up to the highest temperature with the value of $\sim-$18 $μ$V/K at 800 K. The negative sign of $S$ in the full temperature window signifies the dominating $n$-type character of the compound. The temperature dependent of electrical conductivity, $σ$ (thermal conductivity, $κ$) exhibits the increasing (decreasing) trend with the values of $\sim$1.2 $\times$ 10$^{5}$ $Ω^{-1}$m$^{-1}$ ($\sim$23.7 W/m-K) and $\sim$2.2 $\times$ 10$^{5}$ $Ω^{-1}$m$^{-1}$ ($\sim$15.3 W/m-K) at 300 K and 800 K, respectively. In order to understand these transport properties, the DFT based semi-classical Boltzmann theory is used. The contributions of multi-band electron and hole pockets are found to be mainly responsible for the temperature dependent trend of these properties. The decrement of $|S|$ and increment of $σ/τ$ $\&$ $κ_{e}/τ$ ($τ$ is relaxation time) with temperature is directly related with the contribution of multiple hole pockets. Present study suggests that DFT based electronic calculations provide reasonably good explanations of experimental TE properties of Fe$_{2}$VAl in the high temperature range of $300-800$ K. △ Less

Submitted 19 April, 2022; originally announced April 2022.

PY-Nodes: An ab-initio python code for searching nodes in a material using Nelder-Mead's simplex approach

Authors: Vivek Pandey, Sudhir K. Pandey

Abstract: With the discovery of topological semimetals, it has been found that the band touching points near the Fermi level are of great importance. They give rise to many exciting phenomena in these materials. Moreover, these points, commonly known as nodes, are related to several properties of these semimetals. Thus, the proper estimation of their coordinates is extremely needed for better understanding… ▽ More With the discovery of topological semimetals, it has been found that the band touching points near the Fermi level are of great importance. They give rise to many exciting phenomena in these materials. Moreover, these points, commonly known as nodes, are related to several properties of these semimetals. Thus, the proper estimation of their coordinates is extremely needed for better understanding of the properties of these materials. We have designed a Python 3 based code named PY-Nodes for efficiently finding the nodes present in a given material using first-principle approach. The present version of the code is interfaced with the WIEN2k package. For benchmarking the code, it has been tested on some famous materials which possess characteristic nodes. These include - TaAs, a well-known Weyl semimetal, Na$_3$Bi, which is categorized as Dirac semimetal, CaAgAs, classified as a nodal-line semimetal and YAuPb, which is claimed to be non-trivial topological semimetal. In case of TaAs, 24 nodes are obtained from our calculations. On computing their chiralities, it is found that 12 pairs of nodes having equal and opposite chirality are obtained. Furthermore, for Na$_3$Bi, a pair of nodes are obtained on the either side of $Γ$-point in the $\boldsymbol{k_3}$ direction. In case of CaAgAs, several nodes are obtained in the $k_z$=0 plane. These nodes, when plotted in the $k_x$-$k_y$ plane, form a closed loop which is generally referred to as nodal-line. Finally, in the case of YAuPb, large number of nodes are obtained in the vicinity of $Γ$-point. The results obtained for these materials are in good match with the previous works carried out by different research groups. This assures the reliability and the efficiency of the PY-Nodes code for estimating the nodes present in a given material. △ Less

Submitted 15 December, 2022; v1 submitted 4 February, 2022; originally announced February 2022.

Microscopic Origin Of Room Temperature Ferromagnetism in a Double Perovskite Sr$_2$FeReO$_6$: a first principle and model Hamiltonian study

Authors: Shishir K. Pandey, Ashis K. Nandy, Poonam Kumari, Priya Mahadevan

Abstract: The puzzling observation of room temperature ferromagnetism in double perovskites (A$_2$BB$'$O$_6$), despite having the magnetic lattice of B-ions diluted by non-magnetic B$'$-ions, have been examined for Sr$_2$FeReO$_6$. {\it Ab-initio} spin spiral electronic structure calculations along various high symmetry directions in reciprocal space are used to determine the exchange interactions entering… ▽ More The puzzling observation of room temperature ferromagnetism in double perovskites (A$_2$BB$'$O$_6$), despite having the magnetic lattice of B-ions diluted by non-magnetic B$'$-ions, have been examined for Sr$_2$FeReO$_6$. {\it Ab-initio} spin spiral electronic structure calculations along various high symmetry directions in reciprocal space are used to determine the exchange interactions entering an extended Heisenberg model, which is then solved classically using Monte Carlo simulations to determine the ferromagnetic transition temperature T$_c$. We find that one must consider onsite Coulomb interactions at the nonmagnetic Re sites ($U$) in order to obtain a T$_c$ close to the experimental value. Analysis of the $ab$-$initio$ electronic structure as well as an appropriate model Hamiltonian trace the origin of enhancement in T$_c$ with $U$ to the enhanced exchange splitting that is introduced at these sites. This in turn destabilizes the antiferromagnetic exchange channels, thereby enhancing the T$_c$. The role of occupancy at the non-magnetic sites is examined by contrasting with the case of Sr$_2$FeMoO$_6$. △ Less

Submitted 2 February, 2022; originally announced February 2022.

Charge doping to flat AgF2 monolayers in a chemical capacitor setup

Authors: Daniel Jezierski, Adam Grzelak, XiaoQiang Liu, Shishir Kumar Pandey, Maria N. Gastiasoro, José Lorenzana, Ji Feng, Wojciech Grochala

Abstract: Flat monolayers of silver II fluoride, which could be obtained by epitaxial deposition on an appropriate substrate, have been recently predicted to exhibit very strong antiferromagnetic superexchange and to have large potential for ambient pressure superconductivity if doped to an optimal level. It was shown that AgF2 could become a magnetic glue based superconductor with a critical superconductin… ▽ More Flat monolayers of silver II fluoride, which could be obtained by epitaxial deposition on an appropriate substrate, have been recently predicted to exhibit very strong antiferromagnetic superexchange and to have large potential for ambient pressure superconductivity if doped to an optimal level. It was shown that AgF2 could become a magnetic glue based superconductor with a critical superconducting temperature approaching 200 K at optimum doping. In the current work we calculate the optimum doping to correspond to 14% of holes per formula unit, i.e. quite similar to that for oxocuprates II. Furthermore, using DFT calculations we show that flat AgF2 single layers can indeed be doped to a controlled extent using a recently proposed chemical capacitor setup. Hole doping associated with formation of Ag III proves to be difficult to achieve in the setup explored in this work as it falls at verge of charge stability of fluoride anions and does not affect the d x2 minus y2 manifold . However, in the case of electron doping, manipulation of different factors, such as number of dopant layers and the thickness of the separator, permits fine tuning of the doping level - and concomitantly TC - all the way from underdoped to overdoped regime (in a similar manner as chemical doping for the Nd2CuO4 analogue). △ Less

Submitted 10 January, 2022; originally announced January 2022.

Comments: 23 pages, 18 figures

Journal ref: Phys. Chem. Chem. Phys. 24, 15705 (2022)

Exploring temperature dependent electron-electron interaction of topological crystalline insulators (SnS and SnSe) within Matsubara-time domain

Authors: Antik Sihi, Sudhir K. Pandey

Abstract: Both experimental and theoretical studies show non-trivial topological behaviour in native rocksalt phase for SnS and SnSe and categorize these materials in topological crystalline insulators. Here, the detailed electronic structures studies of SnS and SnSe in the rocksalt phase are carried out using many-body $GW$ based theory and density functional theory both for ground states and temperature d… ▽ More Both experimental and theoretical studies show non-trivial topological behaviour in native rocksalt phase for SnS and SnSe and categorize these materials in topological crystalline insulators. Here, the detailed electronic structures studies of SnS and SnSe in the rocksalt phase are carried out using many-body $GW$ based theory and density functional theory both for ground states and temperature dependent excited states. The estimated values of fundamental direct bandgaps around L-point using $G_0W_0$ (mBJ) are $\sim$0.27 ($\sim$0.13) eV and $\sim$0.37 ($\sim$0.17) eV for SnS and SnSe, respectively. The strength of hybridization between Sn 5$p$ and S 3$p$ (Se 4$p$) orbitals for SnS (SnSe) shows strong k-dependence. The behaviour of $\overline{W}$ ($ω$), which is the averaged value of diagonal matrix elements of fully screened Coulomb interaction, suggests to use full-$GW$ method for exploring the excited states because the correlation effects within these two materials are relatively weak. The temperature dependent electronic structure calculations for SnS and SnSe provide linearly decreasing behaviour of bandgaps with rise in temperatures. The existence of collective excitation of quasiparticles in form of plasmon is predicted for these compounds, where the estimated values of plasmon frequency are $\sim$9.5 eV and $\sim$9.3 eV for SnS and SnSe, respectively. The imaginary part of self-energy and mass renormalization factor ($Z_\textbf{k}(ω)$) due to electron-electron interaction (EEI) are also calculated along W-L-$Γ$ direction for both the materials. The present comparative study reveals that the behaviour of temperature dependent EEI for SnS and SnSe are the almost same and EEI is important for high temperature transport properties. △ Less

Submitted 2 January, 2022; originally announced January 2022.

First-principles phonon calculations for lattice dynamics, thermal expansion and lattice thermal conductivity of CoSi at high temperature region

Authors: Shamim Sk, Sudhir K. Pandey

Abstract: This study presents the first-principles phonon calculations to understand the experimental thermal expansion ($α(T)$) and lattice thermal conductivity ($κ_{L}$) of CoSi at high temperature region. Phonon dispersion is computed using finite displacement method and supercell approach by taking the equilibrium crystal structures obtained from DFT. The calculation of $α(T)$ is done under quasi-harmon… ▽ More This study presents the first-principles phonon calculations to understand the experimental thermal expansion ($α(T)$) and lattice thermal conductivity ($κ_{L}$) of CoSi at high temperature region. Phonon dispersion is computed using finite displacement method and supercell approach by taking the equilibrium crystal structures obtained from DFT. The calculation of $α(T)$ is done under quasi-harmonic approximation. The $κ_{L}$ is calculated using first-principle anharmonic lattice dynamics calculations under single-mode relaxation time approximation. Calculated $α(T)$ in the temperature range $0-1300$ K gives the good match with existing experimental data. The calculated value of $κ_{L}$ ($\sim$8.0 W/m-K) at 300 K is found to be in good agreement with the experimental value of $\sim$8.3 W/m-K. The temperature dependent of phonon lifetime due to phonon-phonon interaction is calculated to understand the behaviour of $κ_{L}$. Present study suggests that ground state phonon dispersion obtained from DFT based methods gives reasonably good explanation of experimental $α(T)$ and $κ_{L}$. △ Less

Submitted 22 December, 2021; v1 submitted 21 December, 2021; originally announced December 2021.

Experimental and computational approaches to study the high temperature thermoelectric properties of novel topological semimetal CoSi

Authors: Shamim Sk, Nisha Shahi, Sudhir K. Pandey

Abstract: Here, we study the thermoelectric properties of topological semimetal CoSi in the temperature range $300-800$ K by using combined experimental and density functional theory (DFT) based methods. CoSi is synthesized using arc melting technique and the Rietveld refinement gives the lattice parameters of a = b = c = 4.445 Å. The measured values of Seebeck coefficient (S) shows the non-monotonic behavi… ▽ More Here, we study the thermoelectric properties of topological semimetal CoSi in the temperature range $300-800$ K by using combined experimental and density functional theory (DFT) based methods. CoSi is synthesized using arc melting technique and the Rietveld refinement gives the lattice parameters of a = b = c = 4.445 Å. The measured values of Seebeck coefficient (S) shows the non-monotonic behaviour in the studied temperature range with the value of $\sim-$81 $μ$V/K at room temperature. The $|S|$ first increases till 560 K ($\sim-$93 $μ$V/K) and then decreases up to 800 K ($\sim-$84 $μ$V/K) indicating the dominating n-type behaviour in the full temperature range. The electrical conductivity, $σ$ (thermal conductivity, $κ$) shows the monotonic decreasing (increasing) behaviour with the values of $\sim$5.2$\times 10^{5}$ (12.1 W/m-K) and $\sim$3.6$\times 10^{5}$ (14.2 W/m-K) $Ω^{-1}m^{-1}$ at 300 K and 800 K, respectively. The $κ$ exhibits the temperature dependency as, $κ\propto T^{0.16}$. The DFT based Boltzmann transport theory is used to understand these behaviour. The multi-band electron and hole pockets appear to be mainly responsible for deciding the temperature dependent transport behaviour. Specifically, the decrease in the $|S|$ above 560 K and change in the slope of $σ$ around 450 K are due to the contribution of thermally generated charge carriers from the hole pockets. The temperature dependent relaxation time is computed which shows temperature dependency of $1/T^{0.35}$. Present study suggests that electronic band-structure obtained from DFT provides reasonably good estimate of the transport coefficients of CoSi in the high temperature region of $300-800$ K. △ Less

Submitted 24 November, 2021; v1 submitted 3 November, 2021; originally announced November 2021.

TRACK: A python code for calculating the transport properties of correlated electron systems using Kubo formalism

Authors: Antik Sihi, Sudhir K. Pandey

Abstract: Exploring the transport properties of different materials brings new avenue for basic understanding of emergent phenomena and practical applications in many different fields. Here, we report a program named as TRACK (TRAnsport properties for Correlated materials using Kubo formalism) which is written in Python 3 for calculating temperature dependent electrical conductivity, electronic part of ther… ▽ More Exploring the transport properties of different materials brings new avenue for basic understanding of emergent phenomena and practical applications in many different fields. Here, we report a program named as TRACK (TRAnsport properties for Correlated materials using Kubo formalism) which is written in Python 3 for calculating temperature dependent electrical conductivity, electronic part of thermal conductivity, Seebeck coefficient and Lorenz number. In this code, Kubo linear-response formalism is utilized for computing these parameters using both interacting and non-interacting electronic structure methods. The formula for transport coefficients is accordingly modified to obtain the transport parameters under relaxation time approximation using band-theory. The basic inputs of this program are the structural information, dense k-points sampling in the irreducible part of the Brillouin zone and the information of velocity matrix elements, which can be calculated using third-party ab-initio package. TRACK is expected to calculate the transport properties of different class of materials. The code has been benchmarked by performing calculation on three different types of materials namely Vanadium (V), FeSi and LaCoO$_3$, which are metal, semiconductor and Mott insulator, respectively. The temperature dependent behaviour of the transport coefficients for these materials show fairly good agreement with the corresponding experimental data. △ Less

Submitted 14 October, 2021; originally announced October 2021.

A silver(II) route to unconventional superconductivity

Authors: Xiaoqiang Liu, Shishir K. Pandey, Ji Feng

Abstract: The highly unusual divalent silver in silver difluoride (AgF$_2$) features a nearly square lattice of Ag$^{+2}$ bridged by fluorides. As a structural and electronic analogue of cuprates, its superconducting properties are yet to be examined. Our first principles electronic structure calculations reveal a striking resemblance between AgF$_2$ and the cuprates. Computed spin susceptibility shows a ma… ▽ More The highly unusual divalent silver in silver difluoride (AgF$_2$) features a nearly square lattice of Ag$^{+2}$ bridged by fluorides. As a structural and electronic analogue of cuprates, its superconducting properties are yet to be examined. Our first principles electronic structure calculations reveal a striking resemblance between AgF$_2$ and the cuprates. Computed spin susceptibility shows a magnetic instability consistent with the experimentally observed antiferromagnetic transition. A linearized Eliashberg theory in fluctuation-exchange approximation shows an unconventional singlet $d$-wave superconducting pairing for bulk AgF$_2$ at an optimal electron doping. The pairing is found to strengthen with a decreasing interlayer coupling, highlighting the importance of quasi-2D nature of the crystal structure. These findings place AgF$_2$ in the category of unconventional high-$T_\text{C}$ superconductors, and its chemical uniqueness may help shed new lights on the high-$T_\text{C}$ phenomena. △ Less

Submitted 27 August, 2021; originally announced August 2021.

Comments: 5 pages, 4 figures

Understanding the Seebeck coefficient of LaNiO3 compound in the temperature range 300-620 K

Authors: Arzena Khatun, Shamim Sk, Sudhir K. Pandey

Abstract: Transition metal oxides have been attracted much attention in thermoelectric community from the last few decades. In the present work, we have synthesized LaNiO$_{3}$ by a simple solution combustion process. To analyze the crystal structure and structural parameters we have used Rietveld refinement method wherein FullProf software is employed. The room temperature x-ray diffraction indicates the t… ▽ More Transition metal oxides have been attracted much attention in thermoelectric community from the last few decades. In the present work, we have synthesized LaNiO$_{3}$ by a simple solution combustion process. To analyze the crystal structure and structural parameters we have used Rietveld refinement method wherein FullProf software is employed. The room temperature x-ray diffraction indicates the trigonal structure with space group $R \, \overline{3} \, c$ (No. 167). The refined values of lattice parameters are a = b = 5.4615 Å\, $\&$ c = 13.1777 Å. Temperature dependent Seebeck coefficient (S) of this compound has been investigated by using experimental and computational tools. The measurement of S is conducted in the temperature range $300-620$ K. The measured values of S in the entire temperature range have negative sign that indicates \textit{n}-type character of the compound. The value of S is found to be $\sim$ $-$8 $μ$V/K at 300 K and at 620 K this value is $\sim$ $-$12 $μ$V/K. The electronic structure calculation is carried out using DFT+\textit{U} method due to having strong correlation in LaNiO$_{3}$. The calculation predicts the metallic ground state of the compound. Temperature dependent S is calculated using BoltzTraP package and compared with experiment. The best matching between experimental and calculated values of S is observed when self-interaction correction is employed as double counting correction in spin-polarized DFT + \textit{U} (= 1 eV) calculation. Based on the computational results maximum power factors are also calculated for \textit{p}-type and \textit{n}-type doping of this compound. △ Less

Submitted 23 August, 2021; originally announced August 2021.

An ab-initio study of topological and transport properties of YAuPb

Authors: Vivek Pandey, Antik Sihi, Sudhir K. Pandey

Abstract: In the last few decades, the study of topological materials has been carried out on an extensive scale. Half-Heusler alloys are well known for their topological behaviours. In this work, we present a detailed study of topological properties of a ternary Half-Heusler alloy, YAuPb, using the tight-binding approach. We have calculated some important topological properties which includes$-$ finding no… ▽ More In the last few decades, the study of topological materials has been carried out on an extensive scale. Half-Heusler alloys are well known for their topological behaviours. In this work, we present a detailed study of topological properties of a ternary Half-Heusler alloy, YAuPb, using the tight-binding approach. We have calculated some important topological properties which includes$-$ finding nodes and their chiralities, Berry curvature ($\boldsymbolΩ$) and the surface-states. Based on the study of these properties, we categorise the material as non-trivial topological semimetal. Besides the topological behaviours, we present a comparative study of temperature dependent transport properties corresponding to the chemical potential ($μ$) of the Fermi level and the node points. The results obtained from the calculations of electrical conductivity per unit relaxation time ($\boldsymbolσ/τ$) and the electronic part of thermal conductivity per unit relaxation time ($\boldsymbolκ_0$) indicates the conducting nature of the material to both the heat and electricity. Furthermore, the negative value of $S$ obtained, indicates the n-type behaviour of the compound. The calculated value of electronic specific heat (Pauli magnetic susceptibility) corresponding to Fermi level is $\sim 0.03 \hspace{1mm}(0.18) \times 10^{-2}$ $ Jmol^{-1}K^{-1}$ ($\sim 1.21 \hspace{1mm}(1.14) \times 10^{-10}$ $ m^{3}mol^{-1}$) at 50 (300) K. This work suggests that YAuPb is a promising candidate of non-trivial topological semimetals which can be employed in transmission of heat and electricity, and as n-type material within the temperature range of 50-300 K. △ Less

Submitted 15 August, 2021; originally announced August 2021.

First-priniciple based study of transport properties of non-trivial topological fermions of CoSi

Authors: Paromita Dutta, Sudhir K. Pandey

Abstract: Recently, CoSi has been identified to have unconventional electronic topology due to lack of inversion center in its B20 cubic structure. The electronic topology has been reported to be present at three nodal points found in the band structure. Two of these nodal points are situated at the $Γ$ (G1 \& G2) and one at $R$ (R1) point. Based on this, we present a study where various transport coefficie… ▽ More Recently, CoSi has been identified to have unconventional electronic topology due to lack of inversion center in its B20 cubic structure. The electronic topology has been reported to be present at three nodal points found in the band structure. Two of these nodal points are situated at the $Γ$ (G1 \& G2) and one at $R$ (R1) point. Based on this, we present a study where various transport coefficients are investigated by using \textit{first-principle} based DFT method for the temperature (T) range 40-300 K. For the chemical potential ($μ$) corresponding to energies of these nodal points and at the Fermi level (E$_F$), 3D constant energy surfaces are constructed. They have shown that the number of states available at energies of these nodal points and the E$_F$ follows an increasing trend as R1 $>$ G2 $>$ E$_F$ $>$ G1 at T = 0 K. Similar increasing behavior seems to follow by other transport coefficients at different $μ$ with T rise such as electrical conductivity($σ$)/relaxation time($τ$) ratio and electronic thermal conductivity ($κ_e/τ$ = $κ^0$). For example, at T = 100 K, $σ/ τ$ $\sim$ 0.13$\times$10$^{20}$ $Ω^{-1} m^{-1} s^{-1}$ at G1 whereas its value reaches $ \sim$ 0.18$\times$10$^{20}$ $Ω^{-1} m^{-1} s^{-1}$ at R1 nodal point. However, Seebeck coefficient ($S$) seems to follow the trend as G2 $>$ E$_F$ $>$ R1 $>$ G1 at any given T. The values of $S$ are obtained to be positive at the $μ$ corresponding to the G2, R1 and E$_F$ (except G1) which is increasing with the rise in T. Also, the dominant charge carriers at G1 point are found to be electrons for T $<$ 225 K whereas for T $>$ 225 K, the charge carriers are obtained to be dominated by holes. Furthermore, the doping concentrations have also been calculated for G1, G2 and R1 points. △ Less

Submitted 13 August, 2021; originally announced August 2021.

Instrument for simultaneous measurement of Seebeck coefficient and thermal conductivity in the temperature range 300-800 K with python interfacing

Authors: Shamim Sk, Abhishek Pandey, Sudhir K. Pandey

Abstract: Fabrication and characterization of instrument for high-temperature simultaneous measurement of Seebeck coefficient (S) and thermal conductivity ($κ$) has been carried out with python automation. The steady-state based Fourier's law of thermal conduction is employed for $κ$ measurement. The parallel thermal conductance technique is implemented for heat loss measurement. Introducing the thin heater… ▽ More Fabrication and characterization of instrument for high-temperature simultaneous measurement of Seebeck coefficient (S) and thermal conductivity ($κ$) has been carried out with python automation. The steady-state based Fourier's law of thermal conduction is employed for $κ$ measurement. The parallel thermal conductance technique is implemented for heat loss measurement. Introducing the thin heater and insulating heater base minimize the heat loss and make the way easier to arrive at high temperature. Measurement of S is carried out using differential method. Same thermocouples are used to measure temperature as well as voltage for S measurement. Care of temperature dependent S of thermocouple has also been taken. Simple design, small size, lightweightmake this instrument more robust. All the components for making sample holder are easily available in the market and can be replaced as per the user demand. This instrument can measure samples with various dimensions and shapes in the temperature range 300 $-$ 800 K. The instrument is validated using different class of samples, such as nickel, gadolinium, Fe$_{2}$VAl and LaCoO$_{3}$. Wide range of S from $\sim$ $-$20 to $\sim$600 $μ$V/K and $κ$ from $\sim$1.1 to $\sim$23.5 W/m-K are studied. The measured values of S and k are in good agreement with the reported data. △ Less

Submitted 30 June, 2021; originally announced June 2021.