-
Self-Organized Three-Dimensional Superstructures, Spinodal Decomposition, and Mechanical Response of Epitaxial Hf$_{1-x}$Al$_x$N Thin Films
Authors:
M. Lorentzon,
N. Takata,
T. Zhu,
G. Greczynski,
R. Hahn,
A. Zubayer,
J. Palisaitis,
H. Riedl,
D. Kim,
L. Hultman,
J. Birch,
N. Ghafoor
Abstract:
Transition metal aluminum nitrides are a technologically important class of multifunctional ceramics. While the HfAlN system is to a large extent unexplored, we study phase stability, nanostructure design, and mechanical properties of rocksalt cubic (c-) phase and wurtzite-hexagonal (h-) phase Hf$_{1-x}$Al$_x$N$_y$ thin films grown on MgO(001) substrates using ion-assisted reactive magnetron sputt…
▽ More
Transition metal aluminum nitrides are a technologically important class of multifunctional ceramics. While the HfAlN system is to a large extent unexplored, we study phase stability, nanostructure design, and mechanical properties of rocksalt cubic (c-) phase and wurtzite-hexagonal (h-) phase Hf$_{1-x}$Al$_x$N$_y$ thin films grown on MgO(001) substrates using ion-assisted reactive magnetron sputtering. Single-crystal c-Hf$_{1-x}$Al$_x$N$_y$ films were obtained with $x < 0.30$. Spinodal decomposition taking place during film deposition resulted in a three-dimensional checkerboard superstructure of AlN-rich and HfN-rich nanodomains, as opposed to a metastable cubic solid solution. Lattice-resolved scanning transmission electron microscopy and x-ray and electron diffraction reveals that the superstructure period is along all three <100> directions and scales almost linearly between 9-13 A with increasing Al content. For $x > 0.41$, however, nanocrystalline h-Hf$_{1-x}$Al$_x$N$_y$ consisting of segregated Hf- and Al-rich nanodomains in a (0001) fiber texture forms. The nanoindentation hardness of these films increases sharply with x, from 26 GPa for HfNy, to 38 GPa for c-Hf$_{1-x}$Al$_x$N$_y$, due to dislocation pinning at the superstructure strain fields. The hardness drops to 22 GPa for the softer h-Hf1-xAlxNy, still remaining considerably higher than that of a binary AlN. In micropillar compression testing, c-Hf$_{0.93}$Al$_{0.07}$N$_{1.15}$ exhibits a linear elastic response up until strain burst, with brittle fracture occurring at a much higher yield stress compared to HfN$_y$, on {110}<011> slip systems, which is attributed to superstructure inhibited dislocation motion. In contrast, h-Hf$_{0.59}$Al$_{0.41}$N$_{1.23}$ exhibits limited plasticity and a high yield stress followed by strain burst, attributed to the nanocrystalline structure.
△ Less
Submitted 6 May, 2025;
originally announced May 2025.
-
The Role of 11B4C Interlayers in Enhancing Fe/Si Multilayer Performance for Polarized Neutron Mirrors
Authors:
Anton Zubayer,
Fredrik Eriksson,
Martin Falk,
Marcus Lorentzon,
Justinas Palisaitis,
Christine Klauser,
Gyula Nagy,
Philipp M. Wolf,
Eduardo Pitthan,
Radek Holeňák,
Daniel Primetzhofer,
Gavin B. G. Stenning,
Artur Glavic,
Jochen Stahn,
Samira Dorri,
Per Eklund,
Jens Birch,
Naureen Ghafoor
Abstract:
This study investigates the effects of incorporating 11B4C interlayers into Fe/Si multilayers, with a focus on interface quality, reflectivity, polarization, and magnetic properties for polarized neutron optics. It is found that the introduction of 1 Å and 2 Å 11B4C interlayers significantly improves the interface sharpness, reducing interface width and preventing excessive Si diffusion into the F…
▽ More
This study investigates the effects of incorporating 11B4C interlayers into Fe/Si multilayers, with a focus on interface quality, reflectivity, polarization, and magnetic properties for polarized neutron optics. It is found that the introduction of 1 Å and 2 Å 11B4C interlayers significantly improves the interface sharpness, reducing interface width and preventing excessive Si diffusion into the Fe layers. X-ray reflectivity and polarized neutron reflectivity measurements show enhanced reflectivity and polarization, with a notable increase in polarization for 30 Å period multilayers. The inclusion of interlayers also helps prevent the formation of iron-silicides, improving both the magnetic properties and neutron optical performance. However, the impact of interlayers is less pronounced in thicker-period multilayers (100 Å), primarily due to the ratio between layer and interface widths. These results suggest that 11B4C interlayers offer a promising route for optimizing Fe/Si multilayer performance in polarized neutron mirrors.
△ Less
Submitted 11 February, 2025;
originally announced February 2025.
-
Chemical-scissor-mediated structural editing of layered transition metal carbides
Authors:
Haoming Ding,
Youbing Li,
Mian Li,
Ke Chen,
Kun Liang,
Guoxin Chen,
Jun Lu,
Justinas Palisaitis,
Per O. A. Persson,
Per Eklund,
Lars Hultman,
Shiyu Du,
Zhifang Chai,
Yury Gogotsi,
Qing Huang
Abstract:
Intercalation of non-van der Waals (vdW) layered materials can produce new 2D and 3D materials with unique properties, but it is difficult to achieve. Here, we describe a structural editing protocol for 3D non-vdW layered ternary carbides and nitrides (MAX phases) and their 2D vdW derivatives (MXenes). Gap-opening and species-intercalating stages were mediated by chemical scissors and guest interc…
▽ More
Intercalation of non-van der Waals (vdW) layered materials can produce new 2D and 3D materials with unique properties, but it is difficult to achieve. Here, we describe a structural editing protocol for 3D non-vdW layered ternary carbides and nitrides (MAX phases) and their 2D vdW derivatives (MXenes). Gap-opening and species-intercalating stages were mediated by chemical scissors and guest intercalants, creating a large family of layered materials with unconventional elements and structures in MAX phases, as well as MXenes with versatile termination species. Removal of surface terminations by metal scissors and stitching of carbide layers by metal atoms leads to a reverse transformation from MXenes to MAX phases, and metal-intercalated 2D carbides. This scissor-mediated structural editing may enable structural and chemical tailoring of other layered ceramics.
△ Less
Submitted 28 July, 2022;
originally announced July 2022.
-
Solid-state Janus nanoprecipitation enables amorphous-like heat conduction in crystalline Mg3Sb2-based thermoelectric materials
Authors:
Rui Shu,
Zhijia Han,
Anna Elsukova,
Yongbin Zhu,
Peng Qin,
Feng Jiang,
Jun Lu,
Per O. Å. Persson,
Justinas Palisaitis,
Arnaud le Febvrier,
Wenqing Zhang,
Oana Cojocaru-Mirédin,
Yuan Yu,
Per Eklund,
Weishu Liu
Abstract:
Solid-state precipitation can be used to tailor materials properties, ranging from ferromagnets and catalysts to mechanical strengthening and energy storage. Thermoelectric properties can be modified by precipitation to enhance phonon scattering while retaining charge-carrier transmission. Here, we uncover unconventional dual Janus-type nanoprecipitates in Mg3Sb1.5Bi0.5 formed by side-by-side Bi-…
▽ More
Solid-state precipitation can be used to tailor materials properties, ranging from ferromagnets and catalysts to mechanical strengthening and energy storage. Thermoelectric properties can be modified by precipitation to enhance phonon scattering while retaining charge-carrier transmission. Here, we uncover unconventional dual Janus-type nanoprecipitates in Mg3Sb1.5Bi0.5 formed by side-by-side Bi- and Ge-rich appendages, in contrast to separate nanoprecipitate formation. These Janus nanoprecipitates result from local co-melting of Bi and Ge during sintering, enabling an amorphous-like lattice thermal conductivity. A precipitate size effect on phonon scattering is observed due to the balance between alloy-disorder and nanoprecipitate scattering. The thermoelectric figure-of-merit ZT reaches 0.6 near room temperature and 1.6 at 773 K. The Janus nanoprecipitation can be introduced into other materials and may act as a general property-tailoring mechanism.
△ Less
Submitted 30 June, 2022; v1 submitted 20 July, 2021;
originally announced July 2021.
