Showing 1–50 of 78 results for author: Paetel, S

Statistics of Strongly Coupled Defects in Superconducting Qubits

Authors: S. Weeden, D. C. Harrison, S. Patel, M. Snyder, E. J. Blackwell, G. Spahn, S. Abdullah, Y. Takeda, B. L. T. Plourde, J. M. Martinis, R. McDermott

Abstract: Decoherence in superconducting qubits is dominated by defects that reside at amorphous interfaces. Interaction with discrete defects results in dropouts that complicate qubit operation and lead to nongaussian tails in the distribution of qubit energy relaxation time $T_1$ that degrade system performance. Spectral diffusion of defects over time leads to fluctuations in $T_1$, posing a challenge for… ▽ More Decoherence in superconducting qubits is dominated by defects that reside at amorphous interfaces. Interaction with discrete defects results in dropouts that complicate qubit operation and lead to nongaussian tails in the distribution of qubit energy relaxation time $T_1$ that degrade system performance. Spectral diffusion of defects over time leads to fluctuations in $T_1$, posing a challenge for calibration. In this work, we measure the energy relaxation of flux-tunable transmons over a range of operating frequencies. We vary qubit geometry to change the interface participation ratio by more than an order of magnitude. Our results are consistent with loss dominated by discrete interfacial defects. Moreover, we are able to localize the dominant defects to within 500 nm of the qubit junctions, where residues from liftoff are present. These results motivate new approaches to qubit junction fabrication that avoid the residues intrinsic to the liftoff process. △ Less

Submitted 30 May, 2025; originally announced June 2025.

Comments: 12 pages, 5+10 figures

IEC-Independent Coupling Between Water Uptake and Ionic Conductivity in Anion-Conducting Polymer Films

Authors: Joan Montes de Oca, Ruilin Dong, Gervasio Zaldivar, Ge Sun, Zhongyang Wang, Shrayesh N. Patel, Paul F. Nealey, Juan J. de Pablo

Abstract: Anion exchange membranes (AEMs) are promising candidates for replacing proton exchange membranes (PEMs) in electrochemical devices such as fuel cells, electrolyzers, batteries, and osmotic energy extraction systems. However, optimizing the AEM design requires a deeper understanding of the ionic conduction mechanism in the hydrated polymer matrix. This study investigates this mechanism by seeking t… ▽ More Anion exchange membranes (AEMs) are promising candidates for replacing proton exchange membranes (PEMs) in electrochemical devices such as fuel cells, electrolyzers, batteries, and osmotic energy extraction systems. However, optimizing the AEM design requires a deeper understanding of the ionic conduction mechanism in the hydrated polymer matrix. This study investigates this mechanism by seeking to understand the relationship between ion exchange capacity (IEC), water absorption, and ionic conductivity in polynorbornene-based thin films. We combine experimental measurements with computational simulations using a newly developed minimal model of the polymer film. Our model is able to reproduce key experimental observations, including water sorption isotherms and ion conduction behavior as a function of relative humidity, and successfully captures the relationship between them. By comparing experimental data with computational results, we explain the commonly reported correlation between conductivity and hydration level and show how the correlation between these variables is affected by the charge density and temperature of the material. Our research advances our understanding of the physical mechanisms that govern the performance of the polyelectrolyte membrane, which is essential for the development of more efficient, stable, and environmentally friendly electrochemical systems. △ Less

Submitted 7 April, 2025; originally announced April 2025.

Comments: 17 pages, 8 figures in the main article. The submission also includes a Supporting Information appendix with 23 additional pages and 15 figures

Journal ref: Macromolecules 2025

Revisiting Phase Transitions of Yttrium: Insights from Density Functional Theory

Authors: Paras Patel, Madhavi H. Dalsaniya, Saurav Patel, Dominik Kurzydłowski, Krzysztof J. Kurzydłowski, Prafulla K. Jha

Abstract: Understanding the mechanism of structural phase transitions in rare-earth elements is a fundamental challenge in condensed matter physics, with significant implications for materials science applications. In this study, we present a systematic investigation on the phase transitions of yttrium under low-pressure conditions ($<$30 GPa) focusing on the hcp, Sm-type, and dhcp phases. A comparative ana… ▽ More Understanding the mechanism of structural phase transitions in rare-earth elements is a fundamental challenge in condensed matter physics, with significant implications for materials science applications. In this study, we present a systematic investigation on the phase transitions of yttrium under low-pressure conditions ($<$30 GPa) focusing on the hcp, Sm-type, and dhcp phases. A comparative analysis of the generalized gradient approximation (GGA) and meta-GGA functionals reveals that the PBE-GGA functional significantly underestimates the phase transition pressures, whereas the r$^2$SCAN functional provides accurate predictions of phase transition pressures which are in excellent agreement with experimental data. The results confirm that the phase transitions in yttrium are driven by vibrational instabilities, as evidenced by the emergence of soft acoustic modes in the phonon dispersion curves for the hcp and Sm-type phase. Elastic properties calculations further confirm mechanical softening at the phase boundaries, particularly in the hcp phase, suggesting a strong correlation between elastic instability and structural transitions. These findings suggest that the emergence of soft modes in the phonon dispersion curves might be a key factor driving the structural phase transition in the rare earth materials. △ Less

Submitted 11 February, 2025; originally announced February 2025.

Characterization of Chromium Impurities in $β$-Ga$_2$O$_3$

Authors: Mark E. Turiansky, Sai Mu, Lukas Razinkovas, Kamyar Parto, Sahil D. Patel, Sean Doan, Ganesh Pokharel, Steven J. Gomez Alvarado, Stephen D. Wilson, Galan Moody, Chris G. Van de Walle

Abstract: Chromium is a common transition-metal impurity that is easily incorporated during crystal growth. It is perhaps best known for giving rise to the 694.3 nm (1.786 eV) emission in Cr-doped Al$_2$O$_3$, exploited in ruby lasers. Chromium has also been found in monoclinic gallium oxide, a wide-bandgap semiconductor being pursued for power electronics. In this work, we thoroughly characterize the behav… ▽ More Chromium is a common transition-metal impurity that is easily incorporated during crystal growth. It is perhaps best known for giving rise to the 694.3 nm (1.786 eV) emission in Cr-doped Al$_2$O$_3$, exploited in ruby lasers. Chromium has also been found in monoclinic gallium oxide, a wide-bandgap semiconductor being pursued for power electronics. In this work, we thoroughly characterize the behavior of Cr in Ga$_2$O$_3$ through theoretical and experimental techniques. $β$-Ga$_2$O$_3$ samples are grown with the floating zone method and show evidence of a sharp photoluminescence signal, reminiscent of ruby. We calculate the energetics of formation of Cr from first principles, demonstrating that Cr preferentially incorporates as a neutral impurity on the octahedral site. Cr possesses a quartet ground-state spin and has an internal transition with a zero-phonon line near 1.8 eV. By comparing the calculated and experimentally measured luminescence lineshape function, we elucidate the role of coupling to phonons and uncover features beyond the Franck-Condon approximation. The combination of strong emission with a small Huang-Rhys factor of 0.05 and a technologically relevant host material render Cr in Ga$_2$O$_3$ attractive as a quantum defect. △ Less

Submitted 31 December, 2024; originally announced January 2025.

Quantum Boltzmann machine learning of ground-state energies

Authors: Dhrumil Patel, Daniel Koch, Saahil Patel, Mark M. Wilde

Abstract: Estimating the ground-state energy of Hamiltonians is a fundamental task for which it is believed that quantum computers can be helpful. Several approaches have been proposed toward this goal, including algorithms based on quantum phase estimation and hybrid quantum-classical optimizers involving parameterized quantum circuits, the latter falling under the umbrella of the variational quantum eigen… ▽ More Estimating the ground-state energy of Hamiltonians is a fundamental task for which it is believed that quantum computers can be helpful. Several approaches have been proposed toward this goal, including algorithms based on quantum phase estimation and hybrid quantum-classical optimizers involving parameterized quantum circuits, the latter falling under the umbrella of the variational quantum eigensolver. Here, we analyze the performance of quantum Boltzmann machines for this task, which is a less explored ansatz based on parameterized thermal states and which is not known to suffer from the barren-plateau problem. We delineate a hybrid quantum-classical algorithm for this task and rigorously prove that it converges to an $\varepsilon$-approximate stationary point of the energy function optimized over parameter space, while using a number of parameterized-thermal-state samples that is polynomial in $\varepsilon^{-1}$, the number of parameters, and the norm of the Hamiltonian being optimized. Our algorithm estimates the gradient of the energy function efficiently by means of a novel quantum circuit construction that combines classical sampling, Hamiltonian simulation, and the Hadamard test, thus overcoming a key obstacle to quantum Boltzmann machine learning that has been left open since [Amin et al., Phys. Rev. X 8, 021050 (2018)]. Additionally supporting our main claims are calculations of the gradient and Hessian of the energy function, as well as an upper bound on the matrix elements of the latter that is used in the convergence analysis. △ Less

Submitted 30 October, 2024; v1 submitted 16 October, 2024; originally announced October 2024.

Comments: v2: 7 pages of main text, 29 pages of supplementary material, 5 figures

Report number: AFRL-2024-0949

Orbital selective Mott transition and magnetic moment in charge density wave heterostructures NbSe$_2/$Ta$X_2$

Authors: Joydeep Chatterjee, Shubham Patel, A Taraphder

Abstract: We investigate the electronic properties of charge density wave (CDW) heterostructures out of monolayers of 1T-NbSe$_2$ and 1T-Ta$X_2$ (where, $X=$ S and Se) using first-principles followed by dynamical calculations. The CDW-ordered crystal structures are simulated using $\sqrt{13}\times\sqrt{13}$ supercells of NbSe$_2$ and Ta$X_2$. These two-dimensional heterostructures are modeled by stacking mo… ▽ More We investigate the electronic properties of charge density wave (CDW) heterostructures out of monolayers of 1T-NbSe$_2$ and 1T-Ta$X_2$ (where, $X=$ S and Se) using first-principles followed by dynamical calculations. The CDW-ordered crystal structures are simulated using $\sqrt{13}\times\sqrt{13}$ supercells of NbSe$_2$ and Ta$X_2$. These two-dimensional heterostructures are modeled by stacking monolayers of NbSe$_2$ and Ta$X_2$ along (001) direction. Our investigations reveal the presence of non-zero magnetic moments in NbSe$_2/$TaS$_2$, albeit without a long-range magnetic order, raising the issue of a possible quantum spin liquid (QSL) as suggested for monolayer 1T-TaS$_2$ recently. In contrast, the NbSe$_2/$TaSe$_2$ heterostructure exhibits no magnetic moment. In order to capture the dynamical effects of local correlation, we use DFT plus multi-orbital dynamical mean field theory (MO-DMFT). Our findings indicate that NbSe$_2/$TaS$_2$ is considerably influenced by the dynamic corrections, whereas NbSe$_2/$TaSe$_2$ shows minimal effects. Additionally, an orbital-selective Mott transition (OSMT) is observed in the NbSe$_2/$TaS$_2$ bilayer heterostructure. △ Less

Submitted 1 October, 2024; originally announced October 2024.

Comments: 8 pages including references, 4 figures, JC and SP contributed equally

Superconductivity, valence-skipping and topological crystalline metal in AgSnSe$_2$

Authors: Shubham Patel, A Taraphder

Abstract: The recent suggestion of valence-skipping phenomenon driving a two-gap superconductivity in $Ag$-doped SnSe, by Kataria, \textit{et al.} [Phys. Rev. B 107, 174517 (2023)], has brought to the fore a long-standing issue once again. The absence of crystallographically inequivalent Sn cites corroborated by electronic properties of AgSnSe$_2$, calculated using first-principles density functional theory… ▽ More The recent suggestion of valence-skipping phenomenon driving a two-gap superconductivity in $Ag$-doped SnSe, by Kataria, \textit{et al.} [Phys. Rev. B 107, 174517 (2023)], has brought to the fore a long-standing issue once again. The absence of crystallographically inequivalent Sn cites corroborated by electronic properties of AgSnSe$_2$, calculated using first-principles density functional theory, however, does not appear to provide a strong support in favor of valence-skipping in this system. Interestingly, the signature of avoided band-crossings (with the inclusion of SOC) and non-zero \textit{mirror} Chern number ($n_{\mathcal{M}}$) confirm a non-trivial topology. The presence of mirror symmetry-protected surface states along the mirror planes indicates that AgSnSe$_2$ could be a potential candidate for topological crystalline metals (TCMs). Moreover, our calculation of electron-phonon coupling and anisotropic superconducting properties of AgSnSe$_2$, using Migdal-Eliashberg theory, gives a single-gap superconductivity with critical temperature $T_c \approx 7$K, consistent with the experimental value of $5$K. The interplay of topology and superconductivity in this three-dimensional material appears quite intriguing and it may provide new insights into the exploration of superconductivity and topology. △ Less

Submitted 15 September, 2024; v1 submitted 6 September, 2024; originally announced September 2024.

Comments: 9 pages including references, and 7 figures

Journal ref: Phys. Rev. B 111, 024508 (2025)

Biaxial strain tuning of excitons in monolayer MoSe$_2$ by high-temperature physical vapor deposition

Authors: S. Patel, T. Faltermeier, S. Puri, R. Rodriguez, K. Reynolds, S. Davari, H. O. H. Churchill, N. J. Borys, H. Nakamura

Abstract: We present strain tuning of excitonic emission in monolayer MoSe$_2$ by using a high-temperature physical vapor deposition (PVD). The use of two amorphous substrates, Si$_{3}$N$_{4}$ and SiO$_{2}$, provides two setpoints to induce distinct amounts of \textit{biaxial} tensile strain determined by a thermal expansion mismatch between the monolayer and the substrate. The tuning rate of the $A$-excito… ▽ More We present strain tuning of excitonic emission in monolayer MoSe$_2$ by using a high-temperature physical vapor deposition (PVD). The use of two amorphous substrates, Si$_{3}$N$_{4}$ and SiO$_{2}$, provides two setpoints to induce distinct amounts of \textit{biaxial} tensile strain determined by a thermal expansion mismatch between the monolayer and the substrate. The tuning rate of the $A$-exciton transition energy is found to be 103 meV/\% by photoluminescence (PL), which represents the highest value realized by biaxial strain in transition metal dichalcogenides. The biaxial nature of the tensile strain is confirmed by polarization-resolved second harmonic generation, which reveals unperturbed in-plane three-fold symmetry of the monolayer. Furthermore, a softening of $A_\mathrm{1g}$ out-of-plane lattice vibration is identified in the Raman spectroscopy, which is known to be insignificant for uniaxial strain. Concomitantly, PL mapping of our PVD monolayers demonstrates (i) larger strain occurs in the interior of the mono-domain islands compared to the edges and (ii) the absence of island-size dependence in the magnitude of induced strain. Our results demonstrate an effective path towards strain engineering of excitons by using growth substrates, which holds great promise as a building block for future optoelectronic applications. △ Less

Submitted 27 August, 2024; originally announced August 2024.

Journal ref: Phys. Rev. B 110, 245310 (2024)

Substrate interference and strain in the second harmonic generation from MoSe$_2$ monolayers

Authors: S. Puri, S. Patel, J. L. Cabellos, L. E. Rosas-Hernandez, S. Barraza-Lopez, B. Mendoza, H. Nakamura

Abstract: Nonlinear optical materials of atomic thickness--such as non-centrosymmetric 2H transition metal dichalcogenide monolayers--have a second order nonlinear susceptibility ($χ^{(2)}$) whose intensity can be tuned by strain. However, whether $χ^{(2)}$ is enhanced or reduced by tensile strain is a subject of conflicting reports. Here, we grow high-quality MoSe$_2$ monolayers under controlled biaxial st… ▽ More Nonlinear optical materials of atomic thickness--such as non-centrosymmetric 2H transition metal dichalcogenide monolayers--have a second order nonlinear susceptibility ($χ^{(2)}$) whose intensity can be tuned by strain. However, whether $χ^{(2)}$ is enhanced or reduced by tensile strain is a subject of conflicting reports. Here, we grow high-quality MoSe$_2$ monolayers under controlled biaxial strain created by two different substrates, and study their linear and non-linear optical responses with a combination of experimental and theoretical approaches. A 15-fold overall enhancement in second harmonic generation (SHG) intensity is observed on MoSe$_2$ monolayers grown on SiO$_2$ when compared to its value when on a Si$_3$N$_4$ substrate. A seven-fold enhancement was ascertained to substrate interference, and a factor of two to the enhancement of $χ^{(2)}$ arising from biaxial strain: substrate interference and strain are independent handles to engineer the SHG strength of non-centrosymmetric 2D materials. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Journal ref: Nano Lett. 24, 13061 (2024)

Photoinduced Charge Transfer in Transition Metal Dichalcogenide Quantum Dots

Authors: Praveen Mishra, Arun Singh Patel, Sanjay Kumar Chauhan, Anirban Chakraborti

Abstract: In this paper, we have explored the charge transfer mechanism in transition metal dichalcogenide (TMDC) quantum dots (QDs) of molybdenum disulfide ($\rm{MoS_2}$) and tungsten disulfide ($\rm{WS_2}$). Rhodamine 6G (R6G), a dye from the rhodamine family, has been employed as the fluorescent molecule, with MoS$_2$ and WS$_2$ QDs acting as electron acceptors in the photo-induced charge transfer proces… ▽ More In this paper, we have explored the charge transfer mechanism in transition metal dichalcogenide (TMDC) quantum dots (QDs) of molybdenum disulfide ($\rm{MoS_2}$) and tungsten disulfide ($\rm{WS_2}$). Rhodamine 6G (R6G), a dye from the rhodamine family, has been employed as the fluorescent molecule, with MoS$_2$ and WS$_2$ QDs acting as electron acceptors in the photo-induced charge transfer process. The TMDC QDs were synthesized using a top-down approach and characterized through transmission electron microscopy (TEM), UV-Vis spectrophotometry, and fluorimetry. TEM images revealed well-dispersed particles measuring 2 nm in size. These QDs exhibit strong fluorescence emission when excited with light at wavelengths below 350 nm. Under light exposure, photons generate charges in the fluorescent dye molecules, and the TMDC QDs facilitate the charge transfer process. The charge transfer phenomenon was investigated using time-correlated single photon counting (TCSPC), a time-resolved fluorescence spectroscopic technique. The time-resolved fluorescence study indicated a change in the fluorescence (FL) lifetime of R6G molecules in the presence of QDs. The FL lifetime of R6G molecules without QDs was found to be 4.0 ns, which decreased to 1.9 ns and 3.8 ns in the presence of MoS$_2$ and WS$_2$ QDs, respectively. This reduction in FL lifetime suggests that the MoS$_2$ and WS$_2$ QDs provide an additional pathway for photo-generated electrons in the excited state of R6G molecules. This research can be extended to optoelectronic devices, where charge transfer is crucial for device efficiency and performance. △ Less

Submitted 19 September, 2024; v1 submitted 31 May, 2024; originally announced May 2024.

Comments: 7 pages, 10 figures

Critical slowing of the spin and charge density wave order in thin film Cr following photoexcitation

Authors: Sheena K. K. Patel, Oleg Yu. Gorobtsov, Devin Cela, Stjepan B. Hrkac, Nelson Hua, Rajasekhar Medapalli, Anatoly G. Shabalin, James Wingert, James M. Glownia, Diling Zhu, Matthieu Chollet, Oleg G. Shpyrko, Andrej Singer, Eric E. Fullerton

Abstract: We report on the evolution of the charge density wave (CDW) and spin density wave (SDW) order of a chromium film following photoexcitation with an ultrafast optical laser pulse. The CDW is measured by ultrafast time-resolved x-ray diffraction of the CDW satellite that tracks the suppression and recovery of the CDW following photoexcitation. We find that as the temperature of the film approaches a… ▽ More We report on the evolution of the charge density wave (CDW) and spin density wave (SDW) order of a chromium film following photoexcitation with an ultrafast optical laser pulse. The CDW is measured by ultrafast time-resolved x-ray diffraction of the CDW satellite that tracks the suppression and recovery of the CDW following photoexcitation. We find that as the temperature of the film approaches a discontinuous phase transition in the CDW and SDW order, the time scales of recovery increase exponentially from the expected thermal time scales. We extend a Landau model for SDW systems to account for this critical slowing with the appropriate boundary conditions imposed by the geometry of the thin film system. This model allows us to assess the energy barrier between available CDW/SDW states with different spatial periodicities. △ Less

Submitted 5 March, 2024; v1 submitted 29 February, 2024; originally announced March 2024.

Comments: Author typo fixed

Electron-phonon coupling, critical temperatures and gaps in $\rm{NbSe_2}$/$\rm{MoS_2}$ Ising Superconductors

Authors: Shubham Patel, Soumyasree Jena, A Taraphder

Abstract: Utilizing Migdal-Eliashberg theory of superconductivity within the first-principles calculations, we work out the role of electron-phonon coupling (EPC) and anisotropic superconducting properties of a recently discovered [Appl. Phys. Lett. 120, 183101 (2022)] 2D van der Waals heterostructure comprising a single layer of MoS$_2$ and few layers of NbSe$_2$. We find strong EPC and a softening of phon… ▽ More Utilizing Migdal-Eliashberg theory of superconductivity within the first-principles calculations, we work out the role of electron-phonon coupling (EPC) and anisotropic superconducting properties of a recently discovered [Appl. Phys. Lett. 120, 183101 (2022)] 2D van der Waals heterostructure comprising a single layer of MoS$_2$ and few layers of NbSe$_2$. We find strong EPC and a softening of phonon modes in the lowest acoustic branch. While the single MoS$_2$ layer does not actively contribute to the EPC, it significantly elevates the superconducting critical temperature ($T_c$) compared to monolayer NbSe$_2$. This is attributed to the degradation of the charge-density wave (CDW) by the MoS$_2$ layer. Notably, we observe a two-gap superconductivity in $\rm{NbSe_2}$/$\rm{MoS_2}$ and extend our study to three layers of NbSe$_2$. A reduction in $T_c$ with increasing thickness of NbSe$_2$ is observed. We confirm that this trend is consistent with recent experiments, if one goes beyond three layers of NbSe$_2$. We incorporated spin-orbit coupling (SOC) and suggest a possible mechanism for Ising superconductivity. We find that SOC reduces EPC while $T_c$ is suppressed concomitantly by about 5K, leading to a closer estimate of the experimental $T_c$. △ Less

Submitted 5 January, 2024; v1 submitted 4 January, 2024; originally announced January 2024.

Comments: 6 figures, Supplementary file attached

Journal ref: Phys. Rev. B 110, 014507 Published 10 July 2024

Aqueous Laponite Dispersions are Attractive Gels, Not Repulsive Wigner Glasses: A Critical Commentary

Authors: Yogesh M Joshi, Shrajesh Patel, Khushboo Suman

Abstract: An aqueous dispersion of Laponite has been studied in the literature for over the past three decades. Typically, the aqueous dispersion of Laponite undergoes incessant evolution of its microstructure, wherein its elastic modulus and the mean relaxation time show a continuous increase as a function of time. A considerable amount of discussion has revolved around the nature of this dispersion, speci… ▽ More An aqueous dispersion of Laponite has been studied in the literature for over the past three decades. Typically, the aqueous dispersion of Laponite undergoes incessant evolution of its microstructure, wherein its elastic modulus and the mean relaxation time show a continuous increase as a function of time. A considerable amount of discussion has revolved around the nature of this dispersion, specifically whether it can be classified as a repulsive Wigner glass state, characterized by disconnected Laponite particles stabilized by electrostatic repulsions, or an attractive gel state, in which the particles form a percolated space-spanning network. The proponents of the Wigner glass state also conjecture that this system experiences a glass-glass transition after a period of two days has elapsed since its preparation. In this commentary, we explore this topic from a rheological point of view analyzing the published literature and performing new experiments. Aided by additional evidence from the literature, we propose that rheological behavior overwhelmingly suggests that an aqueous dispersion of Laponite undergoes sol - attractive gel transition and remains in the attractive gel state over at least up to 7 days without undergoing any additional transition. Importantly, rheology, despite being a macroscopic tool governed by principles of mechanics, offers profound insight into the microstructure of this particular system. The corresponding analysis conclusively determines the state of an aqueous dispersion of Laponite to be an attractive gel. △ Less

Submitted 3 January, 2024; originally announced January 2024.

Comments: 19 pages, 2 figures, 1 table

Journal ref: Journal of Rheology 68 (2024) 145-152

Formation of Mn-rich interfacial phases in Co2FexMn1-xSi thin films

Authors: Ka Ming Law, Arashdeep S. Thind, Mihir Pendharkar, Sahil J. Patel, Joshua J. Phillips, Chris J. Palmstrom, Jaume Gazquez, Albina Borisevich, Rohan Mishra, Adam J. Hauser

Abstract: We report the formation of Mn-rich regions at the interface of Co2FexMn1-xSi thin films grown on GaAs substrates by molecular beam epitaxy (MBE). Scanning transmission electron microscopy (STEM) with electron energy loss (EEL) spectrum imaging reveals that each interfacial region: (1) is 1-2 nm wide, (2) occurs irrespective of the Fe/Mn composition ratio and in both Co-rich and Co-poor films, and… ▽ More We report the formation of Mn-rich regions at the interface of Co2FexMn1-xSi thin films grown on GaAs substrates by molecular beam epitaxy (MBE). Scanning transmission electron microscopy (STEM) with electron energy loss (EEL) spectrum imaging reveals that each interfacial region: (1) is 1-2 nm wide, (2) occurs irrespective of the Fe/Mn composition ratio and in both Co-rich and Co-poor films, and (3) displaces both Co and Fe indiscriminately. We also observe a Mn-depleted region in each film directly above each Mn-rich interfacial layer, roughly 3 nm in width in the x = 0 and x = 0.3 films, and 1 nm in the x = 0.7 (less Mn) film. We posit that growth energetics favor Mn diffusion to the interface even when there is no significant Ga interdiffusion into the epitaxial film. Element-specific X-ray magnetic circular dichroism (XMCD) measurements show larger Co, Fe, and Mn orbital to spin magnetic moment ratios compared to bulk values across the Co2FexMn1-xSi compositional range. The values lie between reported values for pure bulk and nanostructured Co, Fe, and Mn materials, corroborating the non-uniform, layered nature of the material on the nanoscale. Finally, SQUID magnetometry demonstrates that the films deviate from the Slater-Pauling rule for uniform films of both the expected and the measured composition. The results inform a need for care and increased scrutiny when forming Mn-based magnetic thin films on III-V semiconductors like GaAs, particularly when films are on the order of 5 nm or when interface composition is critical to spin transport or other device applications. △ Less

Submitted 24 December, 2023; originally announced December 2023.

Skyrmion-Excited Spin Wave Fractal Network

Authors: Nan Tang, W. L. N. C. Liyanage, Sergio A. Montoya, Sheena Patel, Lizabeth J. Quigley, Alexander J. Grutter, Michael R. Fitzsimmons, Sunil Sinha, Julie A. Borchers, Eric E. Fullerton, Lisa DeBeer-Schmitt, Dustin A. Gilbert

Abstract: Magnetic skyrmions exhibit unique, technologically relevant pseudo-particle behaviors which arise from their topological protection, including well-defined, three-dimensional dynamic modes that occur at microwave frequencies. During dynamic excitation, spin waves are ejected into the interstitial regions between skyrmions, creating the magnetic equivalent of a turbulent sea. However, since the spi… ▽ More Magnetic skyrmions exhibit unique, technologically relevant pseudo-particle behaviors which arise from their topological protection, including well-defined, three-dimensional dynamic modes that occur at microwave frequencies. During dynamic excitation, spin waves are ejected into the interstitial regions between skyrmions, creating the magnetic equivalent of a turbulent sea. However, since the spin waves in these systems have a well-defined length scale, and the skyrmions are on an ordered lattice, ordered structures from spin wave interference can precipitate from the chaos. This work uses small angle neutron scattering (SANS) to capture the dynamics in hybrid skyrmions and investigate the spin wave structure. Performing simultaneous ferromagnetic resonance and SANS, the diffraction pattern shows a large increase in low-angle scattering intensity which is present only in the resonance condition. This scattering pattern is best fit using a mass fractal model, which suggests the spin waves form a long-range fractal network. The fractal structure is constructed of fundamental units with a size that encodes the spin wave emissions and are constrained by the skyrmion lattice. These results offer critical insights into the nanoscale dynamics of skyrmions, identify a new dynamic spin wave fractal structure, and demonstrates SANS as a unique tool to probe high-speed dynamics. △ Less

Submitted 9 November, 2023; originally announced November 2023.

Journal ref: Advanced Materials, 2300416 (2023)

Rethinking Ductility -- A Study Into the Size-Affected Fracture of Polymers

Authors: Zainab S. Patel, Abdulaziz O. Alrashed, Kush Dwivedi, Marco Salviato, Lucas R. Meza

Abstract: Ductility quantifies a material's capacity for plastic deformation, and it is a key property for preventing fracture driven failure in engineering parts. While some brittle materials exhibit improved ductility at small scales, the processes underlying this phenomenon are not well understood. This work establishes a mechanism for the origin of ductility via an investigation of size-affected fractur… ▽ More Ductility quantifies a material's capacity for plastic deformation, and it is a key property for preventing fracture driven failure in engineering parts. While some brittle materials exhibit improved ductility at small scales, the processes underlying this phenomenon are not well understood. This work establishes a mechanism for the origin of ductility via an investigation of size-affected fracture processes and polymer degree of conversion (DC) in two-photon lithography (TPL) fabricated materials. Microscale single edge notch bend ($μ$SENB) specimens were written with widths from 8 to 26 $μ$m and with different laser powers and post-write thermal annealing to control the DC between 17\% and 80\%. We find that shifting from low to high DC predictably causes a $\sim$3x and $\sim$4x increase in strength and bending stiffness, respectively, but that there is a corresponding $\sim$6x decrease in fracture energy from 180 $J/m^2$ to 30 $J/m^2$. Notably, this reduced fracture energy is accompanied by a ductile-to-brittle transition (DBT) in the failure behavior. Using finite element analysis, we demonstrate that the DBT occurs when the fracture yielding zone size ($r_p$) approaches the sample width, corresponding with a known fracture size-affected transition from flaw-based to strength-based failure. This finding provides a crucial insight that ductility is a size-induced property that occurs when features are reduced below a characteristic fracture length scale and that strength, stiffness, and toughness alone are insufficient predictors of ductility. △ Less

Submitted 1 September, 2023; originally announced September 2023.

Comments: 17 pages, 6 figures

Low-noise single-photon counting superconducting nanowire detectors at infrared wavelengths up to 29 $μ$m

Authors: Gregor G. Taylor, Alexander B. Walter, Boris Korzh, Bruce Bumble, Sahil R. Patel, Jason P. Allmaras, Andrew D. Beyer, Roger O'Brient, Matthew D. Shaw, Emma E. Wollman

Abstract: We report on the extension of the spectral sensitivity of superconducting nanowire single-photon detectors to a wavelength of 29 $μ$m. This represents the first demonstration of a time correlated single-photon counting detector at these long infrared wavelengths. We achieve saturated internal detection efficiency from 10 to 29 $μ$m, whilst maintaining dark count rates below 0.1 counts per second.… ▽ More We report on the extension of the spectral sensitivity of superconducting nanowire single-photon detectors to a wavelength of 29 $μ$m. This represents the first demonstration of a time correlated single-photon counting detector at these long infrared wavelengths. We achieve saturated internal detection efficiency from 10 to 29 $μ$m, whilst maintaining dark count rates below 0.1 counts per second. Extension of superconducting nanowire single-photon detectors to this spectral range provides low noise and high timing resolution photon counting detection, effectively providing a new class of single-photon sensitive detector for these wavelengths. These detectors are important for applications such as exoplanet spectroscopy, infrared astrophysics, physical chemistry, remote sensing and direct dark-matter detection. △ Less

Submitted 29 August, 2023; originally announced August 2023.

Comments: 15 pages, 5 figures

Layer-dependent electronic structures and magnetic ground states of polar-polar $\rm{LaVO_3/KTaO_3}$ (001) heterostructures

Authors: Shubham Patel, Narayan Mohanta, Snehasish Nandy, Subhendra D. Mahanti, A Taraphder

Abstract: Employing a first-principles and model Hamiltonian approach, we work out the electronic properties of polar-polar LaVO$_3$/KTaO$_3$ (LVO/KTO, 001) heterostrctures, with up to six layers of KTO and five layers of LVO. Our analyses indicate the existence of multiple Lifshitz transitions (LTs) within the $t_{2g}$ bands, which can be fine-tuned by adjusting the number of LVO layers or applying gate vo… ▽ More Employing a first-principles and model Hamiltonian approach, we work out the electronic properties of polar-polar LaVO$_3$/KTaO$_3$ (LVO/KTO, 001) heterostrctures, with up to six layers of KTO and five layers of LVO. Our analyses indicate the existence of multiple Lifshitz transitions (LTs) within the $t_{2g}$ bands, which can be fine-tuned by adjusting the number of LVO layers or applying gate voltage. Contrary to the experimental report, spin-orbit coupling is found to be negligible, originating solely from the Ta $5d_{xy}$-derived band of KTO, while the 5$d_{xz}$ and 5$d_{yz}$ bands are considerably away from the Fermi level while LVO overlayers having no role in it. Magnetic properties of the heterostructures, due to Vanadium ions, exhibit a pronounced sensitivity to the number of LVO and KTO layers. Our calculations indicate that the interlayer AFM, (so called A-AFM), is energetically most favorable. This is further supported by ground state energy calculations on extended $\sqrt{2}\times\sqrt{2}$ supercells. Moreover, we find that an insulator to metal transition at the interface requires four LVO layers, corroborating the experimental observation. The interfaces featuring ferromagnetic (FM) ground states turn out to be \textit{half-metallic} after the critical thickness is reached. Considerations of the magnetic interactions appear crucial for the experimentally observed critical thickness for metallicity. △ Less

Submitted 18 July, 2024; v1 submitted 13 July, 2023; originally announced July 2023.

Comments: 14 pages, 9 figures

Report number: LA-UR-23-33670

Journal ref: Physical Review B 110, 054402 (2024)

Single Flux Quantum-Based Digital Control of Superconducting Qubits in a Multi-Chip Module

Authors: Chuan-Hong Liu, Andrew Ballard, David Olaya, Daniel R. Schmidt, John Biesecker, Tammy Lucas, Joel Ullom, Shravan Patel, Owen Rafferty, Alexander Opremcak, Kenneth Dodge, Vito Iaia, Tianna McBroom, Jonathan L. Dubois, Pete F. Hopkins, Samuel P. Benz, Britton L. T. Plourde, Robert McDermott

Abstract: The single flux quantum (SFQ) digital superconducting logic family has been proposed for the scalable control of next-generation superconducting qubit arrays. In the initial implementation, SFQ-based gate fidelity was limited by quasiparticle (QP) poisoning induced by the dissipative on-chip SFQ driver circuit. In this work, we introduce a multi-chip module architecture to suppress phonon-mediated… ▽ More The single flux quantum (SFQ) digital superconducting logic family has been proposed for the scalable control of next-generation superconducting qubit arrays. In the initial implementation, SFQ-based gate fidelity was limited by quasiparticle (QP) poisoning induced by the dissipative on-chip SFQ driver circuit. In this work, we introduce a multi-chip module architecture to suppress phonon-mediated QP poisoning. Here, the SFQ elements and qubits are fabricated on separate chips that are joined with In bump bonds. We use interleaved randomized benchmarking to characterize the fidelity of SFQ-based gates, and we demonstrate an error per Clifford gate of 1.2(1)%, an order-of-magnitude reduction over the gate error achieved in the initial realization of SFQ-based qubit control. We use purity benchmarking to quantify the contribution of incoherent error at 0.96(2)%; we attribute this error to photon-mediated QP poisoning mediated by the resonant mm-wave antenna modes of the qubit and SFQ-qubit coupler. We anticipate that a straightforward redesign of the SFQ driver circuit to limit the bandwidth of the SFQ pulses will eliminate this source of infidelity, allowing SFQ-based gates with fidelity approaching theoretical limits, namely 99.9% for resonant sequences and 99.99% for more complex pulse sequences involving variable pulse-to-pulse separation. △ Less

Submitted 13 January, 2023; originally announced January 2023.

Comments: 15 pages, 8+4 figures, 1 table

Journal ref: PRX Quantum 4, 030310 (2023)

Surface Acoustic Wave Cavity Optomechanics with WSe$_2$ Single Photon Emitters

Authors: Sahil D. Patel, Kamyar Parto, Michael Choquer, Sammy Umezawa, Landon Hellman, Daniella Polishchuk, Galan Moody

Abstract: Surface acoustic waves (SAWs) are a versatile tool for coherently interfacing with a variety of solid-state quantum systems spanning microwave to optical frequencies, including superconducting qubits, spins, and quantum emitters. Here, we demonstrate SAW cavity optomechanics with quantum emitters in 2D materials, specifically monolayer WSe$_2$, on a planar lithium niobate SAW resonator driven by s… ▽ More Surface acoustic waves (SAWs) are a versatile tool for coherently interfacing with a variety of solid-state quantum systems spanning microwave to optical frequencies, including superconducting qubits, spins, and quantum emitters. Here, we demonstrate SAW cavity optomechanics with quantum emitters in 2D materials, specifically monolayer WSe$_2$, on a planar lithium niobate SAW resonator driven by superconducting electronics. Using steady-state photoluminescence spectroscopy and time-resolved single-photon counting, we map the temporal dynamics of modulated 2D emitters under coupling to different SAW cavity modes, showing energy-level splitting consistent with deformation potential coupling of 30 meV/%. We leverage the large anisotropic strain from the SAW to modulate the excitonic fine-structure splitting on a nanosecond timescale, which may find applications for on-demand entangled photon-pair generation from 2D materials. Cavity optomechanics with SAWs and 2D quantum emitters provides opportunities for compact sensors and quantum electro-optomechanics in a multi-functional integrated platform that combines phononic, optical, and superconducting electronic quantum systems. △ Less

Submitted 28 November, 2022; originally announced November 2022.

Metastable defects decrease the fill factor of solar cells

Authors: Thomas Paul Weiss, Omar Ramírez, Stefan Paetel, Wolfram Witte, Jiro Nishinaga, Thomas Feurer, Susanne Siebentritt

Abstract: Cu(In,Ga)Se2 based solar cells exceed power conversion efficiencies of 23 %. Yet, the fill factor of these solar cells, with best values around 80 %, is relatively low (Si reaches 84.9%) mostly due to diode factors greater than one. Recently, we proposed metastable defects, a general feature of the Cu(In,Ga)Se2 alloy, to be the origin of the increased diode factor. We measure the diode factor of t… ▽ More Cu(In,Ga)Se2 based solar cells exceed power conversion efficiencies of 23 %. Yet, the fill factor of these solar cells, with best values around 80 %, is relatively low (Si reaches 84.9%) mostly due to diode factors greater than one. Recently, we proposed metastable defects, a general feature of the Cu(In,Ga)Se2 alloy, to be the origin of the increased diode factor. We measure the diode factor of the bare absorber layers by excitation-dependent photoluminescence. For high quality and thus high luminescent polycrystalline absorbers, we evaluate the diode factor excitation dependence over four orders of magnitude. Using simulations and the model of metastable defects, we can well describe the experimental findings on n- and p-type epitaxial films as well as the polycrystalline absorbers, providing additional evidence for this model. We find that the diode factors measured optically by photoluminescence impose a lower limit for the diode factor measured electrically on a finished solar cell. Interestingly, the lowest diode factor (optical and electrical) and consequently highest fill factor of 81.0 % is obtained by Ag alloying, i.e. an (Ag,Cu)(In,Ga)Se2 absorber. This finding hints to a pathway to increase fill factors and thus efficiencies for Cu(In,Ga)Se2-based solar cells. △ Less

Submitted 26 April, 2022; originally announced May 2022.

Phonon downconversion to suppress correlated errors in superconducting qubits

Authors: V. Iaia, J. Ku, A. Ballard, C. P. Larson, E. Yelton, C. H. Liu, S. Patel, R. McDermott, B. L. T. Plourde

Abstract: Quantum error correction can preserve quantum information in the presence of local errors, but correlated errors are fatal. For superconducting qubits, high-energy particle impacts from background radioactivity produce energetic phonons that travel throughout the substrate and create excitations above the superconducting ground state, known as quasiparticles, which can poison all qubits on the chi… ▽ More Quantum error correction can preserve quantum information in the presence of local errors, but correlated errors are fatal. For superconducting qubits, high-energy particle impacts from background radioactivity produce energetic phonons that travel throughout the substrate and create excitations above the superconducting ground state, known as quasiparticles, which can poison all qubits on the chip. We use normal metal reservoirs on the chip back side to downconvert phonons to low energies where they can no longer poison qubits. We introduce a pump-probe scheme involving controlled injection of pair-breaking phonons into the qubit chips. We examine quasiparticle poisoning on chips with and without back-side metallization and demonstrate a reduction in the flux of pair-breaking phonons by over a factor of 20. We use a Ramsey interferometer scheme to simultaneously monitor quasiparticle parity on three qubits for each chip and observe a two-order of magnitude reduction in correlated poisoning due to background radiation. △ Less

Submitted 2 November, 2022; v1 submitted 13 March, 2022; originally announced March 2022.

Comments: 24 pages, 17 figures, 5 tables

Journal ref: Nature Communications 13, 6425 (2022)

Ultrafast Emergence of Ferromagnetism in Antiferromagnetic FeRh in High Magnetic Fields

Authors: I. A. Dolgikh, T. G. H. Blank, A. G. Buzdakov, G. Li, K. H. Prabhakara, S. K. K. Patel, R. Medapalli, E. E. Fullerton, O. V. Koplak, J. H. Mentink, K. A. Zvezdin, A. K. Zvezdin, P. C. M. Christianen, A. V. Kimel

Abstract: Ultrafast heating of FeRh by a femtosecond laser pulse launches a magneto-structural phase transition from an antiferromagnetic to a ferromagnetic state. Aiming to reveal the ultrafast kinetics of this transition, we studied magnetization dynamics with the help of the magneto-optical Kerr effect in a broad range of temperatures (from 4 K to 400 K) and magnetic fields (up to 25 T). Three different… ▽ More Ultrafast heating of FeRh by a femtosecond laser pulse launches a magneto-structural phase transition from an antiferromagnetic to a ferromagnetic state. Aiming to reveal the ultrafast kinetics of this transition, we studied magnetization dynamics with the help of the magneto-optical Kerr effect in a broad range of temperatures (from 4 K to 400 K) and magnetic fields (up to 25 T). Three different types of ultrafast magnetization dynamics were observed and, using a numerically calculated H-T phase diagram, the differences were explained by different initial states of FeRh corresponding to a (i) collinear antiferromagnetic, (ii) canted antiferromagnetic and (iii) ferromagnetic alignment of spins. We argue that ultrafast heating of FeRh in the canted antiferromagnetic phase launches practically the fastest possible emergence of magnetization in this material. The magnetization emerges on a time scale of 2 ps, which corresponds to the earlier reported time-scale of the structural changes during the phase transition. △ Less

Submitted 27 July, 2023; v1 submitted 8 February, 2022; originally announced February 2022.

Megahertz-rate Ultrafast X-ray Scattering and Holographic Imaging at the European XFEL

Authors: Nanna Zhou Hagström, Michael Schneider, Nico Kerber, Alexander Yaroslavtsev, Erick Burgos Parra, Marijan Beg, Martin Lang, Christian M. Günther, Boris Seng, Fabian Kammerbauer, Horia Popescu, Matteo Pancaldi, Kumar Neeraj, Debanjan Polley, Rahul Jangid, Stjepan B. Hrkac, Sheena K. K. Patel, Sergei Ovcharenko, Diego Turenne, Dmitriy Ksenzov, Christine Boeglin, Igor Pronin, Marina Baidakova, Clemens von Korff Schmising, Martin Borchert , et al. (75 additional authors not shown)

Abstract: The advent of X-ray free-electron lasers (XFELs) has revolutionized fundamental science, from atomic to condensed matter physics, from chemistry to biology, giving researchers access to X-rays with unprecedented brightness, coherence, and pulse duration. All XFEL facilities built until recently provided X-ray pulses at a relatively low repetition rate, with limited data statistics. Here, we presen… ▽ More The advent of X-ray free-electron lasers (XFELs) has revolutionized fundamental science, from atomic to condensed matter physics, from chemistry to biology, giving researchers access to X-rays with unprecedented brightness, coherence, and pulse duration. All XFEL facilities built until recently provided X-ray pulses at a relatively low repetition rate, with limited data statistics. Here, we present the results from the first megahertz repetition rate X-ray scattering experiments at the Spectroscopy and Coherent Scattering (SCS) instrument of the European XFEL. We illustrate the experimental capabilities that the SCS instrument offers, resulting from the operation at MHz repetition rates and the availability of the novel DSSC 2D imaging detector. Time-resolved magnetic X-ray scattering and holographic imaging experiments in solid state samples were chosen as representative, providing an ideal test-bed for operation at megahertz rates. Our results are relevant and applicable to any other non-destructive XFEL experiments in the soft X-ray range. △ Less

Submitted 20 January, 2022; v1 submitted 17 January, 2022; originally announced January 2022.

Comments: 13 pages, 5 figures. Supplementary Information as ancillary file

Journal ref: J. Synchrotron Rad. (2022), 29

Electric field and Strain-induced Band-gap Engineering and Manipulation of the Rashba Spin Splitting in Janus van der Waals Heterostructures

Authors: Shubham Patel, Urmimala Dey, Narayan Prasad Adhikari, A. Taraphder

Abstract: The compositional as well as structural asymmetries in Janus transition metal dichalcogenides (J-TMDs) and their van der Waals heterostructures (vdW HSs) induce an intrinsic Rashba spin-splitting. We investigate the variation of band-gaps and the Rashba parameter in three different Janus heterostructures having AB-stacked Mo$XY$/W$XY$ ($X$, $Y$ = S, Se, Te; $X\neq Y$) geometry with a $Y-Y$ interfa… ▽ More The compositional as well as structural asymmetries in Janus transition metal dichalcogenides (J-TMDs) and their van der Waals heterostructures (vdW HSs) induce an intrinsic Rashba spin-splitting. We investigate the variation of band-gaps and the Rashba parameter in three different Janus heterostructures having AB-stacked Mo$XY$/W$XY$ ($X$, $Y$ = S, Se, Te; $X\neq Y$) geometry with a $Y-Y$ interface, using first-principles calculations. We consider the effect of external electric field and in-plane biaxial strain in tuning the strength of the intrinsic electric field, which leads to remarkable modifications of the band-gap and the Rashba spin-splitting. In particular, it is found that the positive applied field and compressive in-plane biaxial strain can lead to a notable increase in the Rashba spin-splitting of the valence bands about the $Γ$-point. Moreover, our \textit{ab-initio} density functional theory (DFT) calculations reveal the existence of a type-II band alignment in these heterostructures, which remains robust under positive external field and biaxial strain. These suggest novel ways of engineering the electronic, optical, and spin properties of J-TMD van der Waals heterostructures holding a huge promise in spintronic and optoelectronic devices. Detailed $\mathbf{k\cdot p}$ model analyses have been performed to investigate the electronic and spin properties near the $Γ$ and K points of the Brillouin zone. △ Less

Submitted 19 July, 2022; v1 submitted 31 December, 2021; originally announced December 2021.

Comments: 17 pages, 12 figures

Journal ref: Phys. Rev. B (2022) 106, 035125

Architectural bone parameters and the relationship to titanium lattice design for powder bed fusion additive manufacturing

Authors: Martine McGregor, Sagar Patel, Stewart McLachlin, Mihaela Vlasea

Abstract: Additive manufacturing (AM) of titanium (Ti) and Ti-6Al-4V lattices has been proposed for bone implants and augmentation devices. Ti and Ti-6Al-4V have favourable biocompatibility, corrosion resistance and fatigue strength for bone applications; yet, the optimal parameters for Ti-6Al-4V lattice designs corresponding to the natural micro- and meso-scale architecture of human trabecular and cortical… ▽ More Additive manufacturing (AM) of titanium (Ti) and Ti-6Al-4V lattices has been proposed for bone implants and augmentation devices. Ti and Ti-6Al-4V have favourable biocompatibility, corrosion resistance and fatigue strength for bone applications; yet, the optimal parameters for Ti-6Al-4V lattice designs corresponding to the natural micro- and meso-scale architecture of human trabecular and cortical bone are not well understood. A comprehensive review was completed to compare the natural lattice architecture properties in human bone to Ti and Ti-6Al-4V lattice structures for bone replacement and repair. Ti and Ti-6Al-4V lattice porosity has varied from 15% to 97% with most studies reporting a porosity between 50-70%. Cortical bone is roughly 5-15% porous and lattices with 50-70% porosity are able to achieve comparable stiffness, compressive strength, and yield strength. Trabecular bone has a reported porosity range from 70-90%, with trabecular thickness varying from 120-200 μm. Existing powder bed fusion technologies have produced strut and wall thicknesses ranging from 200-1669 μm. This suggests limited overlap between current AM of Ti and Ti-6Al-4V lattice structures and trabecular bone architecture, indicating that replicating natural trabecular bone parameters with latticing is prohibitively challenging. This review contributes to the body of knowledge by identifying the correspondence of Ti and Ti-6Al-4V lattices to the natural parameters of bone microarchitectures, and provides further guidance on the design and AM recommendations towards addressing recognized performance gaps with powder bed fusion technologies. △ Less

Submitted 2 July, 2021; v1 submitted 17 May, 2021; originally announced May 2021.

Report number: 102273

Journal ref: Additive Manufacturing, 2021

The influence of beam focus during laser powder bed fusion of a high reflectivity aluminium alloy -- AlSi$_{10}$Mg

Authors: Sagar Patel, Haoxiu Chen, Mihaela Vlasea, Yu Zou

Abstract: LPBF of Al alloys is associated with numerous challenges when compared to other commonly used alloys due to their higher reflectivity and thermal conductivity. In this work, processing diagrams, temperature prediction models, XCT, and metallography are used for establishing criteria in process parameter optimization of high reflectivity Al alloys based on AlSi$_{10}$Mg response in using 57 differe… ▽ More LPBF of Al alloys is associated with numerous challenges when compared to other commonly used alloys due to their higher reflectivity and thermal conductivity. In this work, processing diagrams, temperature prediction models, XCT, and metallography are used for establishing criteria in process parameter optimization of high reflectivity Al alloys based on AlSi$_{10}$Mg response in using 57 different process parameter combinations - 21 using a focused Gaussian laser beam and 36 using divergent beams. For LPBF systems with focused beam diameters <100 μm, divergent beams obtained by defocusing to a position above the LPBF build plate primarily lead to conduction mode melt pools, while a focused beam leads to transition and keyhole mode melt pools. Conduction mode melting helps in avoiding keyhole mode defects, resulting in parts with densities >99.98%. Additionally, an analytical model-guided selection of laser power and velocity settings for a focused beam help in stabilizing melt pool and spatter dynamics in the transition melting mode thereby enabling a potential to obtain density values close to conduction mode densities (~99.98%). A dimensionless keyhole number (Ke) was derived in this work to identify distinct regions of conduction (Ke of 0-12), transition (Ke of 12-20), and keyhole (Ke > 20) mode melting during LPBF of AlSi$_{10}$. A melt pool aspect ratio (ratio of melt pool depth to width) of ~0.4 is observed to be the threshold between conduction and transition/keyhole mode melt pools for AlSi$_{10}$, different from the conventionally assumed 0.5. Lastly, inferred laser absorptivity values (from experimental melt pools) of transition/keyhole mode melt pools are observed to be >40% higher when compared to conduction mode melt pools. This work demonstrates a dimensionless-process map method to obtain near fully dense parts that can be generalized for LPBF of high reflectivity alloys. △ Less

Submitted 24 August, 2022; v1 submitted 17 May, 2021; originally announced May 2021.

Report number: 103112

Journal ref: Additive Manufacturing, 2022

Spurious Antenna Modes of the Transmon Qubit

Authors: O. Rafferty, S. Patel, C. H. Liu, S. Abdullah, C. D. Wilen, D. C. Harrison, R. McDermott

Abstract: Superconducting qubits are resonant absorbers of pair-breaking radiation. The metal pads that form the qubit capacitance support standing wave modes at frequencies of order 100~GHz; these modes are strongly coupled to free-space impedance through their electric dipole moment. While the antenna mode of the 3D transmon qubit is easily seen to be a resonant dipole, other 2D qubit types can be underst… ▽ More Superconducting qubits are resonant absorbers of pair-breaking radiation. The metal pads that form the qubit capacitance support standing wave modes at frequencies of order 100~GHz; these modes are strongly coupled to free-space impedance through their electric dipole moment. While the antenna mode of the 3D transmon qubit is easily seen to be a resonant dipole, other 2D qubit types can be understood as the aperture duals of wire loop antennas or folded dipoles. For typical Josephson junction parameters, the junction provides a reasonable conjugate match to the fundamental antenna mode. We calculate the contribution to quasiparticle poisoning from resonant absorption of blackbody radiation. We extend our analysis to dissipation at the qubit frequency, where radiative losses provide an ultimate limit to qubit energy relaxation time. A clear understanding of the spurious antenna modes of qubits will allow designs that are insensitive to pair-breaking radiation and that display reduced radiative losses at the qubit frequency. △ Less

Submitted 6 April, 2021; v1 submitted 11 March, 2021; originally announced March 2021.

Comments: 9 pages, 6 figures, LaTex; figure 1 updated, section 5 clarification added, reference added, bibliography updated; submitted to Phys. Rev. X

Phonon-assisted formation of an itinerant electronic density wave

Authors: Jiaruo Li, Oleg Yu. Gorobtsov, Sheena K. K. Patel, Nelson Hua, Benjamin Gregory, Anatoly G. Shabalin, Stjepan Hrkac, James Wingert, Devin Cela, James M. Glownia, Matthieu Chollet, Diling Zhu, Rajasekhar Medapalli, Eric E. Fullerton, Oleg G. Shpyrko, Andrej Singer

Abstract: Electronic instabilities drive ordering transitions in condensed matter. Despite many advances in the microscopic understanding of the ordered states, a more nuanced and profound question often remains unanswered: how do the collective excitations influence the electronic order formation? Here, we experimentally show that a phonon affects the spin density wave (SDW) formation after an SDW-quench b… ▽ More Electronic instabilities drive ordering transitions in condensed matter. Despite many advances in the microscopic understanding of the ordered states, a more nuanced and profound question often remains unanswered: how do the collective excitations influence the electronic order formation? Here, we experimentally show that a phonon affects the spin density wave (SDW) formation after an SDW-quench by femtosecond laser pulses. In a thin film, the temperature-dependent SDW period is quantized, allowing us to track the out-of-equilibrium formation path of the SDW precisely. By exploiting its persistent coupling to the lattice, we probe the SDW through the transient lattice distortion, measured by femtosecond X-ray diffraction. We find that within 500 femtoseconds after a complete quench, the SDW forms with the low-temperature period, directly bypassing a thermal state with the high-temperature period. We argue that a momentum-matched phonon launched by the quench changes the formation path of the SDW through the dynamic pinning of the order parameter. △ Less

Submitted 9 December, 2020; originally announced December 2020.

Magneto-Optical Properties of InSb for Infrared Spectral Filtering

Authors: Nolan Peard, Dennis Callahan, Joy C. Perkinson, Qingyang Du, Neil S. Patel, Takian Fakhrul, John LeBlanc, Caroline A. Ross, Juejun Hu, Christine Y. Wang

Abstract: We present measurements of the Faraday effect in n-type InSb. The Verdet coefficient was determined for a range of carrier concentrations near $10^{17}$ $\text{cm}^{-3}$ in the $λ$ = 8 $μ$m - 12 $μ$m long-wave infrared regime. The absorption coefficient was measured and a figure of merit calculated for each sample. From these measurements, we calculated the carrier effective mass and illustrate th… ▽ More We present measurements of the Faraday effect in n-type InSb. The Verdet coefficient was determined for a range of carrier concentrations near $10^{17}$ $\text{cm}^{-3}$ in the $λ$ = 8 $μ$m - 12 $μ$m long-wave infrared regime. The absorption coefficient was measured and a figure of merit calculated for each sample. From these measurements, we calculated the carrier effective mass and illustrate the variation of the figure of merit with wavelength. A method for creating a tunable bandpass filter via the Faraday rotation is discussed along with preliminary results from a prototype device. △ Less

Submitted 28 November, 2020; v1 submitted 18 August, 2020; originally announced August 2020.

Comments: 14 pages, 14 figures

Enhanced photocatalytic activity of plasmonic Au nanoparticles incorporated MoS$_2$ nanosheets for degradation of organic dyes

Authors: Anjali Rani, Arun Singh Patel, Anirban Chakraborti, Kulvinder Singh, Prianka Sharma

Abstract: In the present paper, we investigate the effect of plasmonic Au nanoparticles (NPs) decoration on the photocatalytic efficiency of MoS$_2$ nanosheets. The Au NPs are grown on the surface of chemically exfoliated MoS$_2$ nanosheets by chemical reduction method. Au-MoS$_2$ nanostructures (NSs) are characterized by X-ray diffractometer, Raman spectrometer, absorption spectrophotometer, and transmissi… ▽ More In the present paper, we investigate the effect of plasmonic Au nanoparticles (NPs) decoration on the photocatalytic efficiency of MoS$_2$ nanosheets. The Au NPs are grown on the surface of chemically exfoliated MoS$_2$ nanosheets by chemical reduction method. Au-MoS$_2$ nanostructures (NSs) are characterized by X-ray diffractometer, Raman spectrometer, absorption spectrophotometer, and transmission electron microscopy. Exfoliated MoS$_2$ and Au-MoS$_2$ NSs are used to study the photocatalytic degradation of organic dyes methyl red (MR) and methylene blue (MB). Under UV-Visible light irradiation, pristine MoS$_2$ shows photo degradation efficiencies between 30% to 46.9% for MR and 23.3% to 44% for MB, with varying exposure times from 30 to 120 min, respectively. However, Au-MoS$_2$ NSs with maximum Au NPs concentration show enhanced degradation efficiency from 70.2 to 96.7% for MR, and from 65.2 to 94.3% for MB. The manifold enhancement of degradation efficiency for both the dyes with Au-MoS$_2$ NSs may be attributed to the presence of Au NPs acting as charge trapping sites in the NSs. We believe this study would have potential application in battling the ill-effects of environmental degradation, which poses a major threat to humans as well as biodiversity. △ Less

Submitted 29 June, 2020; originally announced June 2020.

Comments: 22 pages, 12 figures

Femtosecond Photocurrents at the Pt/FeRh Interface

Authors: Rajasekhar Medapalli, Guanqiao Li, Sheena K. K. Patel, Rostislav. V. Mikhaylovskiy, Theo Rasing, Alexey V. Kimel, Eric E. Fullerton

Abstract: Femtosecond laser excitation of FeRh/Pt bilayers launches an ultrafast pulse of electric photocurrent in the Pt-layer and thus results in emission of electromagnetic radiation in the THz spectral range. Analysis of the THz emission as a function of polarization of the femtosecond laser pulse, external magnetic field, sample temperature and sample orientation shows that photocurrent can emerge due… ▽ More Femtosecond laser excitation of FeRh/Pt bilayers launches an ultrafast pulse of electric photocurrent in the Pt-layer and thus results in emission of electromagnetic radiation in the THz spectral range. Analysis of the THz emission as a function of polarization of the femtosecond laser pulse, external magnetic field, sample temperature and sample orientation shows that photocurrent can emerge due to vertical spin pumping and photo-induced inverse spin-orbit torque at the FeRh/Pt interface. The vertical spin pumping from FeRh to Pt does not depend on the polarization of light and originates from ultrafast laser-induced demagnetization of the ferromagnetic phase of FeRh. The photo-induced inverse spin-orbit torque at the FeRh/Pt interface can be described in terms of a helicity-dependent effect of circularly polarized light on the magnetization of the ferromagnetic FeRh and subsequent generation of a photocurrent. △ Less

Submitted 27 May, 2020; originally announced May 2020.

Comments: 11 pages

Prediction of Li intercalation voltages in rechargeable battery cathode materials: effects of exchange-correlation functional, van der Waals interactions, and Hubbard $U$

Authors: Eric B. Isaacs, Shane Patel, Chris Wolverton

Abstract: Quantitative predictions of the Li intercalation voltage and of the electronic properties of rechargeable battery cathode materials are a substantial challenge for first-principles theory due to the possibility of (1) strong correlations associated with localized transition metal $d$ electrons and (2) significant van der Waals (vdW) interactions in layered systems, both of which are not accurately… ▽ More Quantitative predictions of the Li intercalation voltage and of the electronic properties of rechargeable battery cathode materials are a substantial challenge for first-principles theory due to the possibility of (1) strong correlations associated with localized transition metal $d$ electrons and (2) significant van der Waals (vdW) interactions in layered systems, both of which are not accurately captured by standard approximations to density functional theory (DFT). Here, we perform a systematic benchmark of electronic structure methods based on the widely-used generalized gradient approximation of Perdew, Burke, and Ernzerhof (PBE) and the new strongly constrained and appropriately normed (SCAN) meta-generalized gradient approximation for battery cathode materials. Studying layered Li$_x$TiS$_2$, Li$_x$NiO$_2$, and Li$_x$CoO$_2$, olivine Li$_x$FePO$_4$, and spinel Li$_x$Mn$_2$O$_4$, we compute the voltage, crystal structure, and electronic structure with and without extensions to incorporate on-site Hubbard interactions and vdW interactions. Within pure DFT (i.e., without corrections for on-site Hubbard interactions), SCAN is a significant improvement over PBE for describing cathode materials, decreasing the mean absolute voltage error by more than 50%. Although explicit vdW interactions are not critical and in cases even detrimental when applied in conjunction with SCAN, Hubbard $U$ corrections are still in general necessary to achieve reasonable agreement with experiment. We show that no single method considered here can accurately describe the voltage and overall structural, electronic, and magnetic properties (i.e., errors no more than 5% for voltage, volume, band gap, and magnetic moments) of battery cathode materials, motivating a strong need for improved electronic structure approaches for such systems. △ Less

Submitted 3 March, 2020; originally announced March 2020.

Journal ref: Phys. Rev. Materials 4, 065405 (2020)

Direct measurement of temporal correlations above the spin-glass transition by coherent resonant magnetic x-ray spectroscopy

Authors: Jingjin Song, Sheena K. K. Patel, Rupak Bhattacharya, Yi Yang, Sudip Pandey, Xiao M. Chen, M. Brian Maple, Eric E. Fullerton, Sujoy Roy, Claudio Mazzoli, Chandra M. Varma, Sunil K. Sinha

Abstract: In the 1970s a new paradigm was introduced that interacting quenched systems, such as a spin-glass, have a phase transition in which long time memory of spatial patterns is realized without spatial correlations. The principal methods to study the spin-glass transition, besides some elaborate and elegant theoretical constructions, have been numerical computer simulations and neutron spin echo measu… ▽ More In the 1970s a new paradigm was introduced that interacting quenched systems, such as a spin-glass, have a phase transition in which long time memory of spatial patterns is realized without spatial correlations. The principal methods to study the spin-glass transition, besides some elaborate and elegant theoretical constructions, have been numerical computer simulations and neutron spin echo measurements . We show here that the dynamical correlations of the spin-glass transition are embedded in measurements of the four-spin correlations at very long times. This information is directly available in the temporal correlations of the intensity, which encode the spin-orientation memory, obtained by the technique of resonant magnetic x-ray photon correlation spectroscopy (RM- XPCS). We have implemented this method to observe and accurately characterize the critical slowing down of the spin orientation fluctuations in the classic metallic spin glass alloy Cu(Mn) over time scales of 1 to 1000 secs. Our method opens the way for studying phase transitions in systems such as spin ices, and quantum spin liquids, as well as the structural glass transition. △ Less

Submitted 11 February, 2020; originally announced February 2020.

Comments: 14 pages, 9 figures

Ultrafast perturbation of magnetic domains by optical pumping in a ferromagnetic multilayer

Authors: Dmitriy Zusin, Ezio Iacocca, Loïc Le Guyader, Alexander H. Reid, William F. Schlotter, Tian-Min Liu, Daniel J. Higley, Giacomo Coslovich, Scott F. Wandel, Phoebe M. Tengdin, Sheena K. K. Patel, Anatoly Shabalin, Nelson Hua, Stjepan B. Hrkac, Hans T. Nembach, Justin M. Shaw, Sergio A. Montoya, Adam Blonsky, Christian Gentry, Mark A. Hoefer, Margaret M. Murnane, Henry C. Kapteyn, Eric E. Fullerton, Oleg Shpyrko, Hermann A. Dürr , et al. (1 additional authors not shown)

Abstract: Ultrafast optical pumping of spatially nonuniform magnetic textures is known to induce far-from-equilibrium spin transport effects. Here, we use ultrafast x-ray diffraction with unprecedented dynamic range to study the laser-induced dynamics of labyrinth domain networks in ferromagnetic CoFe/Ni multilayers. We detected azimuthally isotropic, odd order, magnetic diffraction rings up to 5th order. T… ▽ More Ultrafast optical pumping of spatially nonuniform magnetic textures is known to induce far-from-equilibrium spin transport effects. Here, we use ultrafast x-ray diffraction with unprecedented dynamic range to study the laser-induced dynamics of labyrinth domain networks in ferromagnetic CoFe/Ni multilayers. We detected azimuthally isotropic, odd order, magnetic diffraction rings up to 5th order. The amplitudes of all three diffraction rings quench to different degrees within 1.6 ps. In addition, all three of the detected diffraction rings both broaden by 15% and radially contract by 6% during the quench process. We are able to rigorously quantify a 31% ultrafast broadening of the domain walls via Fourier analysis of the order-dependent quenching of the three detected diffraction rings. The broadening of the diffraction rings is interpreted as a reduction in the domain coherence length, but the shift in the ring radius, while unambiguous in its occurrence, remains unexplained. In particular, we demonstrate that a radial shift explained by domain wall broadening can be ruled out. With the unprecedented dynamic range of our data, our results provide convincing evidence that labyrinth domain structures are spatially perturbed at ultrafast speeds under far-from-equilibrium conditions, albeit the mechanism inducing the perturbations remains yet to be clarified. △ Less

Submitted 9 June, 2022; v1 submitted 31 January, 2020; originally announced January 2020.

Ultrafast kinetics of the antiferromagnetic-ferromagnetic phase transition in FeRh

Authors: G. Li, R. Medapalli, J. H. Mentink, R. V. Mikhaylovskiy, T. G. H. Blank, S. K. K. Patel, A. K. Zvezdin, Th. Rasing, E. E. Fullerton, A. V. Kimel

Abstract: Understanding how fast short-range interactions build up long-range order is one of the most intriguing topics in condensed matter physics. FeRh is a test specimen for studying this problem in magnetism, where the microscopic spin-spin exchange interaction is ultimately responsible for either ferro- or antiferromagnetic macroscopic order. Femtosecond laser excitation can induce ferromagnetism in a… ▽ More Understanding how fast short-range interactions build up long-range order is one of the most intriguing topics in condensed matter physics. FeRh is a test specimen for studying this problem in magnetism, where the microscopic spin-spin exchange interaction is ultimately responsible for either ferro- or antiferromagnetic macroscopic order. Femtosecond laser excitation can induce ferromagnetism in antiferromagnetic FeRh, but the mechanism and dynamics of this transition are topics of intense debates. Employing double-pump THz emission spectroscopy has enabled us to dramatically increase the temporal detection window of THz emission probes of transient states without sacrificing any loss of resolution or sensitivity. It allows us to study the kinetics of emergent ferromagnetism from the femtosecond up to the nanosecond timescales in FeRh/Pt bilayers. Our results strongly suggest a latency period between the initial pump-excitation and the emission of THz radiation by ferromagnetic nuclei. △ Less

Submitted 21 October, 2021; v1 submitted 19 January, 2020; originally announced January 2020.

Comments: 35 pages total, 8 figures in main text, 7 figures in supplementary

Tailoring optical and magnetic properties of molybdenum disulphide nanosheets by incorporating plasmonic gold nanoparticles

Authors: Anjali Rani, Arun Singh Patel, Anirban Chakraborti, Kulvinder Singh, Prianka Sharma

Abstract: The present paper deals with the systematic growth of plasmonic gold nanoparticles (Au NPs) on molybdenum disulphide (MoS$_2$) nanosheets as well as the effect of Au NPs on the optical and magnetic properties. The crystalline nature of the nanocomposites is confirmed by X-ray diffraction and transmission electron microscopic techniques. The optical properties are characterized using absorption and… ▽ More The present paper deals with the systematic growth of plasmonic gold nanoparticles (Au NPs) on molybdenum disulphide (MoS$_2$) nanosheets as well as the effect of Au NPs on the optical and magnetic properties. The crystalline nature of the nanocomposites is confirmed by X-ray diffraction and transmission electron microscopic techniques. The optical properties are characterized using absorption and Raman spectroscopic techniques. The electron paramagnetic resonance technique is used to study the magnetic response of the nanocomposites. The paper attempts to gain a fundamental understanding of the two-dimensional nanomaterial-based composites for their applications in the magnetic and optical devices. △ Less

Submitted 29 January, 2020; v1 submitted 9 December, 2019; originally announced December 2019.

Comments: 9 pages, 5 figures

Surface Reconstruction Limited Conductivity in Block-Copolymer Li Battery Electrolytes

Authors: Preston Sutton, Peter Bennington, Shrayesh N. Patel, Morgan Stefik, Ulrich B. Wiesner, Paul F. Nealey, Ullrich Steiner, Ilja Gunkel

Abstract: Solid polymer electrolytes for lithium batteries promise improvements in safety and energy density if their conductivity can be increased. Nanostructured block copolymer electrolytes specifically have the potential to provide both good ionic conductivity and good mechanical properties. This study shows that the previously neglected nanoscale composition of the polymer electrolyte close to the elec… ▽ More Solid polymer electrolytes for lithium batteries promise improvements in safety and energy density if their conductivity can be increased. Nanostructured block copolymer electrolytes specifically have the potential to provide both good ionic conductivity and good mechanical properties. This study shows that the previously neglected nanoscale composition of the polymer electrolyte close to the electrode surface has an important effect on impedance measurements, despite its negligible extent compared to the bulk electrolyte. Using standard stainless steel blocking electrodes, the impedance of lithium salt-doped poly(isoprene-b-styrene-b-ethylene oxide) (ISO) exhibited a marked decrease upon thermal processing of the electrolyte. In contrast, covering the electrode surface with a low molecular weight poly(ethylene oxide) (PEO) brush resulted in higher and more reproducible conductivity values, which were insensitive to the thermal history of the device. A qualitative model of this effect is based on the hypothesis that ISO surface reconstruction at the different electrode surfaces leads to a change in the electrostatic double layer, affecting electrochemical impedance spectroscopy measurements. As a main result, PEO-brush modification of electrode surfaces is beneficial for the robust electrolyte performance of PEO-containing block-copolymers and may be crucial for their accurate characterization and use in Li-ion batteries. △ Less

Submitted 5 September, 2019; originally announced September 2019.

Interaction of Fluorescent Gold Nanoclusters with Transition Metal Dichalcogenides Nanosheets: A Spectroscopic Study

Authors: Arun Singh Patel, Anirban Chakraborti, Praveen Mishra

Abstract: In this paper, the interaction of few tens of atoms containing gold nanoclusters with two dimensional nanosheets of transition metal dichalcogenides nanosheets has been explored. The gold nanoclusters have been synthesized using chemical reduction method in presence of protein molecules as stabilizing agent. The transition metal dichalcogenides nanosheets of molybdenum disulfide (MoS$_2$) has been… ▽ More In this paper, the interaction of few tens of atoms containing gold nanoclusters with two dimensional nanosheets of transition metal dichalcogenides nanosheets has been explored. The gold nanoclusters have been synthesized using chemical reduction method in presence of protein molecules as stabilizing agent. The transition metal dichalcogenides nanosheets of molybdenum disulfide (MoS$_2$) has been chemically exfoliated. Different microscopic and optical spectroscopic tools have been used for characterizing the physical properties of the gold nanoclusters and the two dimensional nanosheets of MoS$_2$. The gold nanoclusters exhibit fluorescence emission at 690 nm. However, the interaction with transition metal dichalcogenides diminishes drastically the fluorescence intensity of the nanoclusters. The spectroscopic methods used for understanding the interaction in the system reveals the absence of energy transfer and dynamic nature of the fluorescence quenching. △ Less

Submitted 29 January, 2020; v1 submitted 16 November, 2018; originally announced November 2018.

Comments: 10 pages, 8 figures

Room Temperature Magnetic Order in Air-Stable Ultra-Thin Iron Oxide

Authors: Jiangtan Yuan, Andrew Balk, Hua Guo, Sahil Patel, Xuanhan Zhao, Qiyi Fang, Douglas Natelson, Scott Crooker, Jun Lou

Abstract: Certain two-dimensional (2D) materials exhibit intriguing properties such as valley polarization, ferroelectricity, superconductivity and charge-density waves. Many of these materials can be manually assembled into atomic-scale multilayer devices under ambient conditions, owing to their exceptional chemical stability. Efforts have been made to add a magnetic degree of freedom to these 2D materials… ▽ More Certain two-dimensional (2D) materials exhibit intriguing properties such as valley polarization, ferroelectricity, superconductivity and charge-density waves. Many of these materials can be manually assembled into atomic-scale multilayer devices under ambient conditions, owing to their exceptional chemical stability. Efforts have been made to add a magnetic degree of freedom to these 2D materials via defects, but only local magnetism has been achieved. Only with the recent discoveries of 2D materials supporting intrinsic ferromagnetism have stacked spintronic devices become realistic. Assembling 2D multilayer devices with these ferromagnets under ambient conditions remains challenging due to their sensitivity to environmental degradation, and magnetic order at room temperature is rare in van der Waals materials. Here, we report the growth of air-stable ultra-thin epsilon-phase iron oxide crystals that exhibit magnetic order at room temperature. These crystals require no passivation and can be prepared in large quantity by cost-effective chemical vapor deposition (CVD). We find that the epsilon phase, which is energetically unfavorable and does not form in bulk, can be easily made in 2D down to a seven unit-cell thickness. Magneto-optical Kerr effect (MOKE) magnetometry of individual crystals shows that even at this ultrathin limit the epsilon phase exhibits robust magnetism with coercive fields of hundreds of mT. These measurements highlight the advantages of ultrathin iron oxide as a promising candidate towards air-stable 2D magnetism and integration into 2D spintronic devices. △ Less

Submitted 25 May, 2018; originally announced May 2018.

Laser induced phase transition in epitaxial FeRh layers studied by pump-probe valence band photoemission

Authors: Federico Pressacco, Vojtěch Uhlíř, Matteo Gatti, Alessandro Nicolaou, Azzedine Bendounan, Jon Ander Arregi, Sheena K. K. Patel, Eric E. Fullerton, Damjan Krizmancic, Fausto Sirotti

Abstract: We use time-resolved X-ray photoelectron spectroscopy to probe the electronic and magnetization dynamics in FeRh films after ultrafast laser excitations. We present experimental and theoretical results which investigate the electronic structure of the FeRh during the first-order phase transition identifying a clear signature of the magnetic phase. We find that a spin polarized feature at the Fermi… ▽ More We use time-resolved X-ray photoelectron spectroscopy to probe the electronic and magnetization dynamics in FeRh films after ultrafast laser excitations. We present experimental and theoretical results which investigate the electronic structure of the FeRh during the first-order phase transition identifying a clear signature of the magnetic phase. We find that a spin polarized feature at the Fermi edge is a fingerprint of the magnetic status of the system that is independent of the long-range ferromagnetic alignment of the magnetic domains. We use this feature to follow the phase transition induced by a laser pulse in a pump-probe experiment and find that the magnetic transition occurs in less than 50 ps, and reaches its maximum in 100 ps. △ Less

Submitted 2 March, 2018; originally announced March 2018.

Comments: 16 pages, 5 figures

Journal ref: Struct. Dyn. 5, 034501 (2018)

Resistivity Anomaly in Weyl Semimetal candidate Molybdenum Telluride

Authors: Dhavala Suri, Christopher Linderalv, Bogdan Karpiak, Linnea Anderson, Sandeep Kumar Singh, Andre Dankert, F. C. Chou, Raman Sankar, F. C. Chou, Paul Erhart, Saroj P. Dash, R. S. Patel

Abstract: The Weyl semi-metal candidate MoTe$_{2}$ is expected to exhibit a range of exotic electronic transport properties. It exhibits a structural phase transition near room temperature that is evident in the thermal hysteresis in resistivity and thermopower (Seebeck coefficient) as well as large spin-orbit interaction. Here, we also document a resistivity anomaly of up to 13% in the temperature window b… ▽ More The Weyl semi-metal candidate MoTe$_{2}$ is expected to exhibit a range of exotic electronic transport properties. It exhibits a structural phase transition near room temperature that is evident in the thermal hysteresis in resistivity and thermopower (Seebeck coefficient) as well as large spin-orbit interaction. Here, we also document a resistivity anomaly of up to 13% in the temperature window between 25 and 50 K, which is found to be strongly anisotropic. Based on the experimental data in conjunction with density functional theory calculations, we conjecture that the anomaly can be related to the presence of defects in the system. These findings open opportunities for further investigations and understanding of the transport behavior in these newly discovered semi-metallic layered systems. △ Less

Submitted 16 January, 2018; originally announced January 2018.

A study of electron and thermal transport in layered Titanium disulphide single crystals

Authors: Dhavala Suri, Vantari Siva, Shalikram Joshi, Kartik Senapati, P. K. Sahoo, Shikha Varma, R. S. Patel

Abstract: We present a detailed study of thermal and electrical transport behavior of single crystal Titanium disulphide flakes, which belongs to the two dimensional, transition metal dichalcogenide class of materials. In-plane Seebeck effect measurements revealed a typical metal-like linear temperature dependence in the range of 85 - 285 K. Electrical transport measurements with in-plane current geometry e… ▽ More We present a detailed study of thermal and electrical transport behavior of single crystal Titanium disulphide flakes, which belongs to the two dimensional, transition metal dichalcogenide class of materials. In-plane Seebeck effect measurements revealed a typical metal-like linear temperature dependence in the range of 85 - 285 K. Electrical transport measurements with in-plane current geometry exhibited a nearly T^2 dependence of resistivity in the range of 10 - 300 K. However, transport measurements along the out-of-plane current geometry showed a transition in temperature dependence of resistivity from T^2 to T^5 beyond 200 K. Interestingly, Au ion-irradiated TiS2 samples showed a similar T 5 dependence of resistivity beyond 200 K, even in the current-in-plane geometry. Micro- Raman measurements were performed to study the phonon modes in both pristine and ion-irradiated TiS2 crystals. △ Less

Submitted 15 January, 2018; originally announced January 2018.

Journal ref: Journal of Physics: Condensed Matter, 29, 485708 (2017)

Electron transport in magnetic tunnel junctions -- a theoretical study of lattice and continuum models

Authors: Dhavala Suri, R. S. Patel, Abhiram Soori

Abstract: Magnetic tunnel junctions comprising of an insulator sandwiched between two ferromagnetic films are the simplest spintronic devices. Theoretically, these can be modeled by a metallic Hamiltonian in both the lattice and the continuum with an addition of Zeeman field. We calculate conductance at arbitrary orientations of the easy axes of the two ferromagnets. When mapped, the lattice and the continu… ▽ More Magnetic tunnel junctions comprising of an insulator sandwiched between two ferromagnetic films are the simplest spintronic devices. Theoretically, these can be modeled by a metallic Hamiltonian in both the lattice and the continuum with an addition of Zeeman field. We calculate conductance at arbitrary orientations of the easy axes of the two ferromagnets. When mapped, the lattice and the continuum models show a discrepancy in conductance in the limit of a large Zeeman field. We resolve the discrepancy by modeling the continuum theory in an appropriate way. △ Less

Submitted 29 August, 2019; v1 submitted 10 August, 2017; originally announced August 2017.

Comments: 5 pages, 4 captioned figures

Electron and thermal transport via Variable Range Hopping in MoSe$_{2}$ single crystals

Authors: Dhavala Suri, R. S. Patel

Abstract: Bulk single crystal Molybdenum diselenide has been studied for its electronic and thermal transport properties. We perform resistivity measurements with current in-plane (CIP) and current perpendicular to plane (CPP) as a function of temperature. The CIP measurements exhibit metal to semiconductor transition at $\simeq 31$ K. In the semiconducting phase ($T > 31$ K), the transport is best explaine… ▽ More Bulk single crystal Molybdenum diselenide has been studied for its electronic and thermal transport properties. We perform resistivity measurements with current in-plane (CIP) and current perpendicular to plane (CPP) as a function of temperature. The CIP measurements exhibit metal to semiconductor transition at $\simeq 31$ K. In the semiconducting phase ($T > 31$ K), the transport is best explained by variable range hopping (VRH) model. Large magnitude of resistivity in CPP mode indicates strong structural anisotropy. Seebeck coefficient as a function of temperature measured in the range $90 - 300$ K, also agrees well with the VRH model. The room temperature Seebeck coefficient is found to be $139$ $μ$V/K. VRH fittings of the resistivity and Seebeck coefficient data indicate high degree of localization. △ Less

Submitted 8 July, 2017; originally announced July 2017.

Comments: 11 pages, 3 figures

Journal ref: Appl. Phys. Lett. 110, 233108 (2017)

A facility for the analysis of the electronic structures of solids and their surfaces by synchrotron radiation photoelectron spectroscopy

Authors: M. Hoesch, T. K. Kim, P. Dudin, H. Wang, S. Scott, P. Harris, S. Patel, M. Matthews, D. Hawkins, S. G. Alcock, T. Richter, J. J. Mudd, M. Basham, L. Pratt, P. Leicester, E. C. Longhi, A. Tamai, F. Baumberger

Abstract: A synchrotron radiation beamline in the photon energy range of 18 - 240 eV and an electron spectroscopy end station have been constructed at the 3 GeV Diamond Light Source storage ring. The instrument features a variable polarisation undulator, a high resolution monochromator, a re-focussing system to form a beam spot of 50x50 micrometer^2 and an end station for angle-resolved photoelectron spectr… ▽ More A synchrotron radiation beamline in the photon energy range of 18 - 240 eV and an electron spectroscopy end station have been constructed at the 3 GeV Diamond Light Source storage ring. The instrument features a variable polarisation undulator, a high resolution monochromator, a re-focussing system to form a beam spot of 50x50 micrometer^2 and an end station for angle-resolved photoelectron spectroscopy (ARPES) including a 6-degrees-of-freedom cryogenic sample manipulator. The beamline design and its performance allow for a highly productive and precise use of the ARPES technique at an energy resolution of 10 - 15 meV for fast k-space mapping studies with a photon flux up to 2 10^13 ph/sec and well below 3 meV for high resolution spectra. △ Less

Submitted 21 December, 2016; originally announced December 2016.

Comments: 10 pages, 11 figures

Journal ref: Rev. Sci. Instrum. 88, 013106 (2017)

Investigating resonance energy transfer from protein molecules to van der Waals nanosheets

Authors: Arun Singh Patel, Praveen Mishra, Pawan K. Kanaujia, Syed Shariq Husain, G. Vijaya Prakash, Anirban Chakraborti

Abstract: The resonance energy transfer (RET) from tryptophan present in bovine serum albumin (BSA) to two dimensional (2D) nanomaterials has been reported. In these bio-nano systems, BSA molecules act as efficient donors while 2D van der Waals nanosheets of graphene, molybdenum disulfide (Mo$S_2$) and tungsten disulfide (W$S_2$) act as acceptors. The fluorescence emission from tryptophan arises at 350 nm,… ▽ More The resonance energy transfer (RET) from tryptophan present in bovine serum albumin (BSA) to two dimensional (2D) nanomaterials has been reported. In these bio-nano systems, BSA molecules act as efficient donors while 2D van der Waals nanosheets of graphene, molybdenum disulfide (Mo$S_2$) and tungsten disulfide (W$S_2$) act as acceptors. The fluorescence emission from tryptophan arises at 350 nm, in presence of 2D nanosheets, the fluorescence intensity of BSA decreases. The time resolved fluorescence study shows that there is decrease in the fluorescence lifetime of BSA molecules in presence of 2D nanosheets. The decrease in fluorescence lifetime of BSA confirms the energy transfer phenomenon in bio-nano interactions. This study is important for finding the bio-compatibility of 2D nanomaterials in biological applications. △ Less

Submitted 22 November, 2016; originally announced November 2016.

Comments: 5 pages, 6 figures

Spin injection and detection up to room temperature in Heusler~alloy/$n$-GaAs spin valves

Authors: T. A. Peterson, S. J. Patel, C. C. Geppert, K. D. Christie, A. Rath, D. Pennachio, M. E. Flatté, P. M. Voyles, C. J. Palmstrøm, P. A. Crowell

Abstract: We have measured the spin injection efficiency and spin lifetime in Co$_2$FeSi/$n$-GaAs lateral nonlocal spin valves from 20 to 300 K. We observe large ($\sim$40 $μ$V) spin valve signals at room temperature and injector currents of $10^3~$A/cm$^2$, facilitated by fabricating spin valve separations smaller than the 1 $μ$m spin diffusion length and applying a forward bias to the detector contact. Th… ▽ More We have measured the spin injection efficiency and spin lifetime in Co$_2$FeSi/$n$-GaAs lateral nonlocal spin valves from 20 to 300 K. We observe large ($\sim$40 $μ$V) spin valve signals at room temperature and injector currents of $10^3~$A/cm$^2$, facilitated by fabricating spin valve separations smaller than the 1 $μ$m spin diffusion length and applying a forward bias to the detector contact. The spin transport parameters are measured by comparing the injector-detector contact separation dependence of the spin valve signal with a numerical model accounting for spin drift and diffusion. The apparent suppression of the spin injection efficiency at the lowest temperatures reflects a breakdown of the ordinary drift-diffusion model in the regime of large spin accumulation. A theoretical calculation of the D'yakonov-Perel spin lifetime agrees well with the measured $n$-GaAs spin lifetime over the entire temperature range. △ Less

Submitted 12 October, 2016; originally announced October 2016.

Comments: 8 figures

Gold nanoflowers as efficient hot-spots for surface enhanced Raman scattering

Authors: Arun Singh Patel, Subhavna Juneja, Pawan K. Kanaujia, G. Vijaya Prakash, Anirban Chakraborti, Jaydeep Bhattacharya

Abstract: Gold nanoflowers are known for their use as efficient host for surface enhanced Raman scattering of organic dye molecules. In this article, gold nanoflowers have been synthesised and rhodamine 6 G (R6G) molecules have been used as probe molecules. It is found that the gold nanoflowers can detect the presence of R6G molecules upto 10^{-10} M. The petals of these nanoflowers play an important role f… ▽ More Gold nanoflowers are known for their use as efficient host for surface enhanced Raman scattering of organic dye molecules. In this article, gold nanoflowers have been synthesised and rhodamine 6 G (R6G) molecules have been used as probe molecules. It is found that the gold nanoflowers can detect the presence of R6G molecules upto 10^{-10} M. The petals of these nanoflowers play an important role for the enhancement of Raman signals, and the intensity of Raman signals is enhanced many folds in presence of gold nanoflowers - the enhancement factor is of the order of 10^6. This is explained in terms of electromagnetic mechanism. △ Less

Submitted 11 April, 2016; originally announced April 2016.

Comments: 8 pages, 4 figures

Resonance Raman scattering and ab initio calculation of electron energy loss spectra of MoS2 nanosheets

Authors: Anirban Chakraborti, Arun Singh Patel, Pawan K. Kanaujia, Palash Nath, G. Vijaya Prakash, Dirtha Sanyal

Abstract: The presence of electron energy loss (EELS) peak is proposed theoretically in molybdenum disulfide (MoS2) nanosheets. Using density functional theory simulations and calculations, one EELS peak is identified in the visible energy range, for MoS2 nanosheets with molybdenum vacancy. Experimentally, four different laser sources are used for the Raman scattering study of MoS2 nanosheets, which show tw… ▽ More The presence of electron energy loss (EELS) peak is proposed theoretically in molybdenum disulfide (MoS2) nanosheets. Using density functional theory simulations and calculations, one EELS peak is identified in the visible energy range, for MoS2 nanosheets with molybdenum vacancy. Experimentally, four different laser sources are used for the Raman scattering study of MoS2 nanosheets, which show two distinct Raman peaks, one at 385 cm-1 (E12g) and the other at 408 cm-1 (A1g). In the cases of three laser sources with wavelengths 405 nm (3.06 eV), 632 nm (1.96 eV) and 785 nm (1.58 eV), respectively, the intensity of E12g Raman peak is more than the A1g Raman peak, while in the case of excitation source of 532 nm (2.33 eV), the intensity profile is reversed and A1g peak is the most intense. Thus a resonance Raman scattering phenomenon is observed for 532 nm laser source. △ Less

Submitted 8 April, 2016; originally announced April 2016.

Comments: 10 pages, 6 figures, uses IOP style

Journal ref: Physics Letters A 380 (2016) 4057-4061