-
Electrically tunable radiative cooling performance of a photonic structure with thermal infrared applications
Authors:
Ataollah Kalantari Osgouei,
Hasan Kocer,
Halil Isik,
Yilmaz Durna,
Amir Ghobadi,
Ekmel Ozbay
Abstract:
Thermal infrared (IR) radiation has attracted considerable attention due to its applications ranging from radiative cooling to thermal management. In this paper, we design a multi-band graphene-based metamaterial absorber compatible with infrared applications and radiative cooling performance. The proposed structure consists of the single-sized metal-insulator-metal (MIM) grating deposited on meta…
▽ More
Thermal infrared (IR) radiation has attracted considerable attention due to its applications ranging from radiative cooling to thermal management. In this paper, we design a multi-band graphene-based metamaterial absorber compatible with infrared applications and radiative cooling performance. The proposed structure consists of the single-sized metal-insulator-metal (MIM) grating deposited on metal/insulator substrate and single-layer graphene. The system realizes a broadband perfect absorption ranging from 940 nm to 1498 nm and a narrowband perfect absorption at the resonance wavelength of 5800 nm. Meanwhile, the absorptivity of the structure is suppressed within the mid-wave infrared (MWIR) and long-wave infrared (LWIR) ranges. Furthermore, to demonstrate the tunability of the structure, an external voltage gate is applied to the single-layer graphene. It is shown that, by varying the chemical potential of graphene layer from 0 eV to 1 eV , the absorption resonances at the mid-infrared (MIR) range can shift toward the shorter wavelengths. It is also observed that the structure can possess an average net cooling power over 18 at the ambient temperature, when is varied from 0 eV to 1 eV. Finally, we investigate the overall performances of the structure as a function of temperature to realize thermal infrared applications.
△ Less
Submitted 20 April, 2023;
originally announced April 2023.
-
Electromagnetic Field Tapering in the High-Roughness Substrates Coated by a Thin Film of Manganese: A Lithography-Free Approach to Ultra-Broadband, Wide-Angle, UV to FIR Perfect Absorption
Authors:
Majid Aalizadeh,
Mohammad Reza Tavakol,
Amin Khavasi,
Mehmet Yilmaz,
Ekmel Ozbay
Abstract:
Metallic layers are known to be used for the suppression of wave transmission when their thickness is sufficiently higher than the skin depth of metal. If in addition to blocking the transmission, metallic layers have the feature of blocking the reflection, too, they would make perfect absorbers. In this work, we propose an experimental approach of using a single thin layer of Manganese (Mn) as bo…
▽ More
Metallic layers are known to be used for the suppression of wave transmission when their thickness is sufficiently higher than the skin depth of metal. If in addition to blocking the transmission, metallic layers have the feature of blocking the reflection, too, they would make perfect absorbers. In this work, we propose an experimental approach of using a single thin layer of Manganese (Mn) as both the transmission suppresser and the reflection suppresser. This approach leads to obtaining lithography-free ultra-broadband perfect absorption in an ultra-wide spectrum ranging from Ultraviolet (UV) to Far Infrared (FIR). The measured average absorption is approximately 99%. Such a promising result can be achieved by only coating a single Mn layer on high-roughness substrates that include random nano-pyramids on it. In other words, we do not need a stack of different materials and combinations of geometrical features. The high roughness is realized on a commercial Silicon wafer substrate by inductively coupled plasma (ICP) etching. The key to this ultra-wideband absorption is electromagnetic field tapering which exists due to the graded-index feature of the structure (known as moth-eye effect), along with the ideal optical properties of Mn which makes it an excellent metal for broadband absorption applications. A full experimental characterization of the fabricated samples is presented along with the physical analysis of the phenomena. The findings of this paper can be used for the realization of lithography-free, cost-effective and high-throughput mass production of broadband absorbers.
△ Less
Submitted 7 March, 2019; v1 submitted 5 December, 2018;
originally announced December 2018.
-
A Route to Unusually Broadband Absorption Spanning from Visible to Mid-Infrared
Authors:
Majid Aalizadeh,
Amin Khavasi,
Andriy E. Serebryannikov,
Guy A. E. Vandenbosch,
Ekmel Ozbay
Abstract:
In this paper, a route to ultra-broadband absorption is suggested and demonstrated by a feasible design. The high absorption regime (absorption above 90%) for the suggested structure ranges from visible to mid-infrared (MIR), i.e. for the wavelength from 478 to 3,278 nm that yields an ultra-wide bandwidth of 2,800 nm. The structure consists of a top-layer-patterned metal-insulator-metal (MIM) conf…
▽ More
In this paper, a route to ultra-broadband absorption is suggested and demonstrated by a feasible design. The high absorption regime (absorption above 90%) for the suggested structure ranges from visible to mid-infrared (MIR), i.e. for the wavelength from 478 to 3,278 nm that yields an ultra-wide bandwidth of 2,800 nm. The structure consists of a top-layer-patterned metal-insulator-metal (MIM) configuration, into the insulator layer of which, an ultra-thin 5 nm layer of Manganese (Mn) is embedded. The MIM configuration represents a Ti-Al2O3-Ti tri-layer. It is shown that, without the ultra-thin layer of Mn, the absorption bandwidth is reduced to 274 nm. Therefore, adding only a 5 nm layer of Mn leads to a more than tenfold increase in the width of the absorption band. It is explained in detail that the physical mechanism contributing to this ultra-broadband result is a combination of plasmonic and non-plasmonic resonance modes, along with the appropriate optical properties of Mn. This structure has the relative bandwidth (RBW) of 149%, while only one step of lithography is required for its fabrication, so it is relatively simple to fabricate. This makes it rather promising for practical applications.
△ Less
Submitted 16 October, 2018;
originally announced October 2018.
-
Lithography-Free, Manganese-Based Ultra-Broadband Absorption Through Annealing-Based Deformation of Thin Layers into metal-air composites
Authors:
Majid Aalizadeh,
Amin Khavasi,
Bayram Butun,
Ekmel Ozbay
Abstract:
Fabrication, characterization, and analysis of an ultra-broadband lithography-free absorber is presented. An over 94% average absorption is experimentally achieved in the wavelength range of 450-1400 nm. This ultra-broadband absorption is obtained by a simple annealed tri-layer metal-insulator-metal (MIM) configuration. The metal used in the structure is Manganese (Mn), which also makes the struct…
▽ More
Fabrication, characterization, and analysis of an ultra-broadband lithography-free absorber is presented. An over 94% average absorption is experimentally achieved in the wavelength range of 450-1400 nm. This ultra-broadband absorption is obtained by a simple annealed tri-layer metal-insulator-metal (MIM) configuration. The metal used in the structure is Manganese (Mn), which also makes the structure cost-effective. It is shown that the structure retains its high absorption for TM polarization, up to 70 degrees, and, for TE polarization, up to 50 degrees. Moreover, the physical mechanism behind this broadband absorption is explained. Being both lithography-free and cost-effective, the structure is a perfect candidate for large-area and mass production purposes.
△ Less
Submitted 21 December, 2018; v1 submitted 16 October, 2018;
originally announced October 2018.
-
Electrically Switchable Metadevices via Graphene
Authors:
Osman Balci,
Nurbek Kakenov,
Ertugrul Karademir,
Sinan Balci,
Semih Cakmakyapan,
Emre Ozan Polat,
Humeyra Caglayan,
Ekmel Ozbay,
Coskun Kocabas
Abstract:
Metamaterials bring sub-wavelength resonating structures together to overcome the limitations of conventional materials. The realization of active metadevices has been an outstanding challenge that requires electrically reconfigurable components operating over a broad spectrum with a wide dynamic range. The existing capability of metamaterials, however, is not sufficient to realize this goal. Here…
▽ More
Metamaterials bring sub-wavelength resonating structures together to overcome the limitations of conventional materials. The realization of active metadevices has been an outstanding challenge that requires electrically reconfigurable components operating over a broad spectrum with a wide dynamic range. The existing capability of metamaterials, however, is not sufficient to realize this goal. Here, by integrating passive metamaterials with active graphene devices, we demonstrate a new class of electrically controlled active metadevices working in microwave frequencies. The fabricated active metadevices enable efficient control of both amplitude (> 50 dB) and phase (> 90°) of electromagnetic waves. In this hybrid system, graphene operates as a tunable Drude metal that controls the radiation of the passive metamaterials. Furthermore, by integrating individually addressable arrays of metadevices, we demonstrate a new class of spatially varying digital metasurfaces where the local dielectric constant can be reconfigured with applied bias voltages. Additionally, we reconfigure resonance frequency of split ring resonators without changing its amplitude by damping one of the two coupled metasurfaces via graphene. Our approach is general enough to implement various metamaterial systems that could yield new applications ranging from electrically switchable cloaking devices to adaptive camouflage systems.
△ Less
Submitted 3 March, 2019; v1 submitted 27 December, 2015;
originally announced December 2015.
-
Electron Energy-Loss Spectroscopy and the Electronic Structure of ABO3 Ferroelectrics: First Principle Calculations
Authors:
Sevket Simsek,
Amirullah M. Mamedov,
Ekmel Ozbay
Abstract:
The electronic structures of ABO3 ferroelectrics are calculated within the density functional theory, and their evolution is analyzed as the crystal-field symmetry changes from cubic to rhombohedral via tetragonal phases. Electronic structure fingerprints that characterize each phase from their electronic spectra are identified. We carried out electron-energy loss spectroscopy experiments by using…
▽ More
The electronic structures of ABO3 ferroelectrics are calculated within the density functional theory, and their evolution is analyzed as the crystal-field symmetry changes from cubic to rhombohedral via tetragonal phases. Electronic structure fingerprints that characterize each phase from their electronic spectra are identified. We carried out electron-energy loss spectroscopy experiments by using synchrotron radiation and compared these results to the theoretical spectra calculated within DFT-LDA. The dominant role of the BO6 octahedra in the formation of the energy spectra of ABO3 compounds was demonstrated. Anomalous behavior of plasmons in ferroelectrics was exhibited by the function representing the characteristic energy loss in the region of phase transition.
△ Less
Submitted 18 April, 2012;
originally announced April 2012.
-
Mechanism of the electro-optic effect and nonlinear optical susceptibilities of some ferroelectrics: ab initio calculation
Authors:
Amirullah M. Mamedov,
Ekmel Ozbay
Abstract:
The nonlinear optical properties and electro-optic effects of some oxygen-octahedric ferroelectrics are studied by the density functional theory (DFT) in the local density approximation (LDA) expressions based on first principle calculations without the scissor approximation. We present calculations of the frequency- dependent complex dielectric function and the second harmonic generation response…
▽ More
The nonlinear optical properties and electro-optic effects of some oxygen-octahedric ferroelectrics are studied by the density functional theory (DFT) in the local density approximation (LDA) expressions based on first principle calculations without the scissor approximation. We present calculations of the frequency- dependent complex dielectric function and the second harmonic generation response coefficient \c{hi}(2)(-2ω,ω,ω) over a large frequency range in tetragonal and rhombohedral phases. The electronic linear electrooptic susceptibility \c{hi}(2) (-ω,ω,0) is also evaluated below the band gap. These results are based on a series of the LDA calculation using DFT. Results for \c{hi}(2) (-ω,ω,0) are in agreement with the experiment below the band gap and those for \c{hi}(2)(-2ω,ω,ω) are compared with the experimental data where available.
△ Less
Submitted 26 December, 2011;
originally announced December 2011.
-
Negative refraction and superlensing in a 2D photonic crystal structure
Authors:
R. Moussa,
S. Foteinopoulou,
Lei Zhang,
G. Tuttle,
K. Guven,
E. Ozbay,
C. M. Soukoulis
Abstract:
We experimentally and theoretically studied a new left-handed (LH) structure based on a photonic crystal (PC) with a negative refractive index. The structure consists of triangular array of rectangular dielectric bars with dielectric constant 9.61. Experimental and theoretical results demonstrate the negative refraction and the superlensing phenomena in the microwave regime. The results show hig…
▽ More
We experimentally and theoretically studied a new left-handed (LH) structure based on a photonic crystal (PC) with a negative refractive index. The structure consists of triangular array of rectangular dielectric bars with dielectric constant 9.61. Experimental and theoretical results demonstrate the negative refraction and the superlensing phenomena in the microwave regime. The results show high transmission for our structure for a wide range of incident angles. Furthermore, surface termination within a specific cut of the structure excite surface waves at the interface between air and PC and allow the reconstruction of evanescent waves for a better focus and better transmission. The normalized average field intensity calculated in both the source and image planes shows almost the same full width at half maximum for the source and the focused beam.
△ Less
Submitted 27 September, 2004;
originally announced September 2004.
