-
Interference of ultrahigh frequency acoustic phonons from distant quasi-continuous sources
Authors:
C. Xiang,
E. R. Cardozo de Oliveira,
S. Sandeep,
K. Papatryfonos,
M. Morassi,
L. Le Gratiet,
A. Harouri,
I. Sagnes,
A. Lemaitre,
O. Ortiz,
M. Esmann,
N. D. Lanzillotti-Kimura
Abstract:
The generation of propagating acoustic waves is essential for telecommunication applications, quantum technologies, and sensing. Up to now, the electrical generation has been at the core of most implementations, but is technologically limited to a few gigahertz. Overcoming this frequency limit holds the prospect of faster modulators, quantum acoustics at higher working temperatures, nanoacoustic s…
▽ More
The generation of propagating acoustic waves is essential for telecommunication applications, quantum technologies, and sensing. Up to now, the electrical generation has been at the core of most implementations, but is technologically limited to a few gigahertz. Overcoming this frequency limit holds the prospect of faster modulators, quantum acoustics at higher working temperatures, nanoacoustic sensing from smaller volumes. Alternatively, the optical excitation of acoustic resonators has unlocked frequencies up to 1 THz, but in most cases, the acoustic energy cannot be efficiently extracted from the resonator into a propagating wave. Here, we demonstrate a quasi-continuous and coherent source of 20 GHz acoustic phonons, based on a ridge waveguide, structured in the vertical direction as a high-Q acousto-optic resonator. The high frequency phonons propagate up to 20 $μ$m away from the source, with a decay rate of $\sim$1.14 dB/$μ$m. We demonstrate the coherence between acoustic phonons generated from two distant sources through spatio-temporal interference. This concept could be scaled up to a larger number of sources, which enable a new generation of optically programmed, reconfigurable nanoacoustic devices and applications.
△ Less
Submitted 9 July, 2024;
originally announced July 2024.
-
Fiber-based angular filtering for high-resolution Brillouin spectroscopy in the 20-300 GHz frequency range
Authors:
A. Rodriguez,
Priya,
O. Ortiz,
P. Senellart,
C. Gomez-Carbonell,
A. Lemaître,
M. Esmann,
N. D. Lanzillotti-Kimura
Abstract:
Brillouin spectroscopy emerges as a promising non-invasive tool for nanoscale imaging and sensing. One-dimensional semiconductor superlattice structures are eminently used for selectively enhancing the generation or detection of phonons at few GHz. While commercially available Brillouin spectrometers provide high-resolution spectra, they consist of complex experimental techniques and are not suita…
▽ More
Brillouin spectroscopy emerges as a promising non-invasive tool for nanoscale imaging and sensing. One-dimensional semiconductor superlattice structures are eminently used for selectively enhancing the generation or detection of phonons at few GHz. While commercially available Brillouin spectrometers provide high-resolution spectra, they consist of complex experimental techniques and are not suitable for semiconductor cavities operating at a wide range of optical wavelengths. We develop a pragmatic experimental approach for conventional Brillouin spectroscopy integrating a widely tunable excitation-source. Our setup combines a fibered-based angular filtering and a spectral filtering based on a single etalon and a double grating spectrometer. This configuration allows probing confined acoustic phonon modes in the 20-300 GHz frequency range with excellent laser rejection and high spectral resolution. Remarkably, our scheme based on the excitation and collection of the enhanced Brillouin scattering signals through the optical cavity, allows for better angular filtering for low phonon frequency. It can be implemented for the study of cavity optomechanics and stimulated Brillouin scattering over broadband optical and acoustic frequency ranges.
△ Less
Submitted 15 November, 2020;
originally announced November 2020.
-
Topological optical and phononic interface mode by simultaneous band inversion
Authors:
O. Ortiz,
P. Priya,
A. Rodriguez,
A. Lemaitre,
M. Esmann,
N. D. Lanzillotti-Kimura
Abstract:
Interface modes have been widely explored in the field of electronics, optics, acoustics and nanophononics. One strategy to generate them is band inversion in one-dimensional superlattices. Most realizations of this type of topological states have so far been explored for a single kind of excitation. Despite its potential in the manipulation and engineering of interactions, platforms for the simul…
▽ More
Interface modes have been widely explored in the field of electronics, optics, acoustics and nanophononics. One strategy to generate them is band inversion in one-dimensional superlattices. Most realizations of this type of topological states have so far been explored for a single kind of excitation. Despite its potential in the manipulation and engineering of interactions, platforms for the simultaneous topological confinement of multiple excitations remain an open challenge. GaAs/AlAs heterostructures exhibit enhanced optomechanical interactions due to the intrinsic colocalization of light and sound. In this work, we designed, fabricated, and experimentally studied a multilayered structure based on GaAs/AlAs. Due to the simultaneously inverted band structures for light and phonons, colocalized interface modes for both 1.34 eV photons and 18 GHz phonons appear. We experimentally validated the concept by optical reflectivity and coherent phonon generation and detection. Furthermore, we theoretically analyzed the performance of different topological designs presenting colocalized states in time-domain Brillouin scattering and deduce engineering rules. Potential future applications include the engineering of robust optomechanical resonators, compatible with the incorporation of active media such as quantum wells and quantum dots.
△ Less
Submitted 29 July, 2020;
originally announced July 2020.
-
Mesoporous Thin-Films for Acoustic Devices in the Gigahertz Range
Authors:
N. Lopez-Abdala,
M. Esmann,
M. C. Fuertes,
P. C. Angelomé,
O. Ortiz,
A. Bruchhausen,
H. Pastoriza,
B. Perrin,
G. J. A. A. Soler-Illia,
N. D. Lanzillotti-Kimura
Abstract:
The coherent manipulation of acoustic waves on the nanoscale usually requires multilayers with thicknesses and interface roughness defined down to the atomic monolayer. This results in expensive devices with predetermined functionality. Nanoscale mesoporous materials present high surface-to-volume ratio and tailorable mesopores, which allow the incorporation of chemical functionalization to nanoac…
▽ More
The coherent manipulation of acoustic waves on the nanoscale usually requires multilayers with thicknesses and interface roughness defined down to the atomic monolayer. This results in expensive devices with predetermined functionality. Nanoscale mesoporous materials present high surface-to-volume ratio and tailorable mesopores, which allow the incorporation of chemical functionalization to nanoacoustics. However, the presence of pores with sizes comparable to the acoustic wavelength is intuitively perceived as a major roadblock in nanoacoustics. Here we present multilayered nanoacoustic resonators based on mesoporous SiO$_2$ thin-films showing acoustic resonances in the 5-100 GHz range. We characterize the acoustic response of the system using coherent phonon generation experiments. Despite resonance wavelengths comparable to the pore size, we observe for the first time unexpectedly well-defined acoustic resonances with Q-factors around 10. Our results open the path to a promising platform for nanoacoustic sensing and reconfigurable acoustic nanodevices based on soft, inexpensive fabrication methods.
△ Less
Submitted 8 April, 2020;
originally announced April 2020.
-
Phonon engineering with superlattices: generalized nanomechanical potentials
Authors:
O. Ortiz,
M. Esmann,
N. D. Lanzillotti-Kimura
Abstract:
Earlier implementations to simulate coherent wave propagation in one-dimensional potentials using acoustic phonons with gigahertz-terahertz frequencies were based on coupled nanoacoustic resonators. Here, we generalize the concept of adiabatic tuning of periodic superlattices for the implementation of effective one-dimensional potentials giving access to cases that cannot be realized by previously…
▽ More
Earlier implementations to simulate coherent wave propagation in one-dimensional potentials using acoustic phonons with gigahertz-terahertz frequencies were based on coupled nanoacoustic resonators. Here, we generalize the concept of adiabatic tuning of periodic superlattices for the implementation of effective one-dimensional potentials giving access to cases that cannot be realized by previously reported phonon engineering approaches, in particular the acoustic simulation of electrons and holes in a quantum well or a double well potential. In addition, the resulting structures are much more compact and hence experimentally feasible. We demonstrate that potential landscapes can be tailored with great versatility in these multilayered devices, apply this general method to the cases of parabolic, Morse and double-well potentials and study the resulting stationary phonon modes. The phonon cavities and potentials presented in this work could be probed by all-optical techniques like pump-probe coherent phonon generation and Brillouin scattering.
△ Less
Submitted 19 March, 2019;
originally announced March 2019.
-
Coherent generation and detection of acoustic phonons in topological nanocavities
Authors:
G. Arregui,
O. Ortíz,
M. Esmann,
C. M. Sotomayor-Torres,
C. Gomez-Carbonell,
O. Mauguin,
B. Perrin,
A. Lemaître,
P. D. García,
N. D. Lanzillotti-Kimura
Abstract:
Inspired by concepts developed for fermionic systems in the framework of condensed matter physics, topology and topological states are recently being explored also in bosonic systems. The possibility of engineering systems with unidirectional wave propagation and protected against disorder is at the heart of this growing interest. Topogical acoustic effects have been observed in a variety of syste…
▽ More
Inspired by concepts developed for fermionic systems in the framework of condensed matter physics, topology and topological states are recently being explored also in bosonic systems. The possibility of engineering systems with unidirectional wave propagation and protected against disorder is at the heart of this growing interest. Topogical acoustic effects have been observed in a variety of systems, most of them based on kHz-MHz sound waves, with typical wavelength of the order of the centimeter. Recently, some of these concepts have been successfully transferred to acoustic phonons in nanoscaled multilayered systems. The reported demonstration of confined topological phononic modes was based on Raman scattering spectroscopy, yet the resolution did not suffice to determine lifetimes and to identify other acoustic modes in the system. Here, we use time-resolved pump-probe measurements using an asynchronous optical sampling (ASOPS) technique to overcome these resolution limitations. By means of one-dimensional GaAs/AlAs distributed Bragg reflectors (DBRs) as building blocks, we engineer high frequency ($\sim$ 200 GHz) topological acoustic interface states. We are able to clearly distinguish confined topological states from stationary band edge modes. The detection scheme reflects the symmetry of the modes directly through the selection rules, evidencing the topological nature of the measured confined state. These experiments enable a new tool in the study of the more complex topology-driven phonon dynamics such as phonon nonlinearities and optomechanical systems with simultaneous confinement of light and sound.
△ Less
Submitted 24 November, 2018;
originally announced November 2018.
