-
Cryogenic Reconfigurable Logic with Superconducting Heater Cryotron: Enhancing Area Efficiency and Enabling Camouflaged Processors
Authors:
Shamiul Alam,
Dana S. Rampini,
Bakhrom G. Oripov,
Adam N. McCaughan,
Ahmedullah Aziz
Abstract:
Superconducting electronics are among the most promising alternatives to conventional CMOS technology thanks to the ultra-fast speed and ultra-high energy efficiency of the superconducting devices. Having a cryogenic control processor is also a crucial requirement for scaling the existing quantum computers up to thousands of qubits. Despite showing outstanding speed and energy efficiency, Josephso…
▽ More
Superconducting electronics are among the most promising alternatives to conventional CMOS technology thanks to the ultra-fast speed and ultra-high energy efficiency of the superconducting devices. Having a cryogenic control processor is also a crucial requirement for scaling the existing quantum computers up to thousands of qubits. Despite showing outstanding speed and energy efficiency, Josephson junction-based circuits suffer from several challenges such as flux trapping leading to limited scalability, difficulty in driving high impedances, and so on. Three-terminal cryotron devices have been proposed to solve these issues which can drive high impedances (>100 kΩ) and are free from any flux trapping issue. In this work, we develop a reconfigurable logic circuit using a heater cryotron (hTron). In conventional approaches, the number of devices to perform a logic operation typically increases with the number of inputs. However, here, we demonstrate a single hTron device-based logic circuit that can be reconfigured to perform 1-input copy and NOT, 2-input AND and OR, and 3-input majority logic operations by choosing suitable biasing conditions. Consequently, we can perform any processing task with a much smaller number of devices. Also, since we can perform different logic operations with the same circuit (same layout), we can develop a camouflaged system where all the logic gates will have the same layout. Therefore, this proposed circuit will ensure enhanced hardware security against reverse engineering attacks.
△ Less
Submitted 27 September, 2023; v1 submitted 16 June, 2023;
originally announced June 2023.
-
A superconducting-nanowire single-photon camera with 400,000 pixels
Authors:
Bakhrom G. Oripov,
Dana S. Rampini,
Jason Allmaras,
Matthew D. Shaw,
Sae Woo Nam,
Boris Korzh,
Adam N. McCaughan
Abstract:
For the last 50 years, superconducting detectors have offered exceptional sensitivity and speed for detecting faint electromagnetic signals in a wide range of applications. These detectors operate at very low temperatures and generate a minimum of excess noise, making them ideal for testing the non-local nature of reality, investigating dark matter, mapping the early universe, and performing quant…
▽ More
For the last 50 years, superconducting detectors have offered exceptional sensitivity and speed for detecting faint electromagnetic signals in a wide range of applications. These detectors operate at very low temperatures and generate a minimum of excess noise, making them ideal for testing the non-local nature of reality, investigating dark matter, mapping the early universe, and performing quantum computation and communication. Despite their appealing properties, however, there are currently no large-scale superconducting cameras - even the largest demonstrations have never exceeded 20 thousand pixels. This is especially true for one of the most promising detector technologies, the superconducting nanowire single-photon detector (SNSPD). These detectors have been demonstrated with system detection efficiencies of 98.0%, sub-3-ps timing jitter, sensitivity from the ultraviolet (250nm) to the mid-infrared (10um), and dark count rates below 6.2e-6 counts per second (cps), but despite more than two decades of development they have never achieved an array size larger than a kilopixel. Here, we report on the implementation and characterization of a 400,000 pixel SNSPD camera, a factor of 400 improvement over the previous state-of-the-art. The array spanned an area 4x2.5 mm with a 5x5um resolution, reached unity quantum efficiency at wavelengths of 370 nm and 635 nm, counted at a rate of 1.1e5 cps, and had a dark count rate of 1e-4 cps per detector (corresponding to 0.13 cps over the whole array). The imaging area contains no ancillary circuitry and the architecture is scalable well beyond the current demonstration, paving the way for large-format superconducting cameras with 100% fill factors and near-unity detection efficiencies across a vast range of the electromagnetic spectrum.
△ Less
Submitted 15 June, 2023;
originally announced June 2023.
-
The thermally-coupled imager: A scalable readout architecture for superconducting nanowire single photon detectors
Authors:
Adam N. McCaughan,
Yao Zhai,
Boris Korzh,
Jason P. Allmaras,
Bakhrom G. Oripov,
Matthew D. Shaw,
Sae Woo Nam
Abstract:
Although superconducting nanowire single-photon detectors (SNSPDs) are a promising technology for quantum optics, metrology, and astronomy, they currently lack a readout architecture that is scalable to the megapixel regime and beyond. In this work, we have designed and demonstrated such an architecture for SNSPDs, called the thermally-coupled imager (TCI). The TCI uses a combination of time-of-fl…
▽ More
Although superconducting nanowire single-photon detectors (SNSPDs) are a promising technology for quantum optics, metrology, and astronomy, they currently lack a readout architecture that is scalable to the megapixel regime and beyond. In this work, we have designed and demonstrated such an architecture for SNSPDs, called the thermally-coupled imager (TCI). The TCI uses a combination of time-of-flight delay lines and thermal coupling to create a scalable architecture that can scale to large array sizes, allows neighboring detectors to operate independently, and requires only four microwave readout lines to operate no matter the size of the array. We give an overview of how the architecture functions, and demonstrate a proof-of-concept $32\times32$ imaging array. The array was able to image a free-space focused spot at 373 nm, count at 9.6 Mcps, and resolve photon location with greater than 99.83\% distinguishability.
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
Large Microwave Inductance of Granular Boron-Doped Diamond Superconducting Films
Authors:
Bakhrom Oripov,
Dinesh Kumar,
Cougar Garcia,
Patrick Hemmer,
Thirumalai Venkatesan,
M. S. Ramachandra Rao,
Steven M. Anlage
Abstract:
Boron-doped diamond granular thin films are known to exhibit superconductivity with an optimal critical temperature of Tc = 7.2K. Here we report the measured complex surface impedance of Boron-doped diamond films in the microwave frequency range using a resonant technique. Experimentally measured inductance values are in good agreement with estimates obtained from the normal state sheet resistance…
▽ More
Boron-doped diamond granular thin films are known to exhibit superconductivity with an optimal critical temperature of Tc = 7.2K. Here we report the measured complex surface impedance of Boron-doped diamond films in the microwave frequency range using a resonant technique. Experimentally measured inductance values are in good agreement with estimates obtained from the normal state sheet resistance of the material. The magnetic penetration depth temperature dependence is consistent with that of a fully-gapped s-wave superconductor. Boron-doped diamond films should find application where high kinetic inductance is needed, such as microwave kinetic inductance detectors and quantum impedance devices.
△ Less
Submitted 16 June, 2021; v1 submitted 26 March, 2021;
originally announced March 2021.
-
Time-dependent Ginzburg-Landau treatment of RF Magnetic Vortices in Superconductors: Vortex-Semiloops in a Spatially Nonuniform Magnetic Field
Authors:
Bakhrom Oripov,
Steven Anlage
Abstract:
We apply time-dependent Ginzburg Landau (TDGL) numerical simulations to study the finite frequency electrodynamics of superconductors subjected to intense rf magnetic field. Much recent TDGL work has focused on spatially uniform external magnetic field and largely ignores the Meissner state screening response of the superconductor. In this work, we solve the TGDL equations for a spatially non-unif…
▽ More
We apply time-dependent Ginzburg Landau (TDGL) numerical simulations to study the finite frequency electrodynamics of superconductors subjected to intense rf magnetic field. Much recent TDGL work has focused on spatially uniform external magnetic field and largely ignores the Meissner state screening response of the superconductor. In this work, we solve the TGDL equations for a spatially non-uniform magnetic field created by a point magnetic dipole in the vicinity of a semi-infinite superconductor. A novel two-domain simulation is performed to accurately capture the effect of the inhomogeneous applied fields and the resulting screening currents. The creation and dynamics of vortex semiloops penetrating deep into the superconductor domain is observed and studied, and the resulting third-harmonic nonlinear response of the sample is calculated. The effect of point-like defects on vortex semi-loop behaviour is also studied. This simulation method will assist our understanding of the limits of superconducting response to intense rf magnetic fields.
△ Less
Submitted 17 February, 2020; v1 submitted 6 September, 2019;
originally announced September 2019.
-
High Frequency Nonlinear Response of Superconducting Cavity-Grade Nb surfaces
Authors:
Bakhrom Oripov,
Thomas Bieler,
Gianluigi Ciovati,
Sergio Calatroni,
Pashupati Dhakal,
Tobias Junginger,
Oleg B. Malyshev,
Giovanni Terenziani,
Anne-Marie Valente-Feliciano,
Reza Valizadeh,
Stuart Wilde,
Steven M. Anlage
Abstract:
Nb Superconducting Radio-Frequency (SRF) cavities are observed to break down and lose their high-Q superconducting properties at accelerating gradients below the limits imposed by theory. The microscopic origins of SRF cavity breakdown are still a matter of some debate. To investigate these microscopic issues temperature and power dependent local third harmonic response was measured on bulk Nb and…
▽ More
Nb Superconducting Radio-Frequency (SRF) cavities are observed to break down and lose their high-Q superconducting properties at accelerating gradients below the limits imposed by theory. The microscopic origins of SRF cavity breakdown are still a matter of some debate. To investigate these microscopic issues temperature and power dependent local third harmonic response was measured on bulk Nb and Nb thin film samples using a novel near-field magnetic microwave microscope between 2.9K-10K and 2GHz-6GHz. Both periodic and non-periodic response as a function of applied RF field amplitude are observed. We attribute these features to extrinsic and intrinsic nonlinear responses of the sample. The RF-current-biased Resistively Shunted Junction (RSJ) model can account for the periodic response and fits very well to the data using reasonable parameters. The non-periodic response is consistent with vortex semi-loops penetrating into the bulk of the sample once sufficiently high RF magnetic field is applied, and the data can be fit to a Time-Dependent Ginzburg-Landau (TDGL) model of this process. The fact that these responses are measured on a wide variety of Nb samples suggests that we have captured the generic nonlinear response of air-exposed Nb surfaces.
△ Less
Submitted 13 June, 2019; v1 submitted 15 April, 2019;
originally announced April 2019.
