Showing 1–50 of 321 results for author: Oh, S

Reference compositions for bismuth telluride thermoelectric materials for low-temperature power generation

Authors: Nirma Kumari, Jaywan Chung, Seunghyun Oh, Jeongin Jang, Jongho Park, Ji Hui Son, SuDong Park, Byungki Ryu

Abstract: Thermoelectric (TE) technology enables direct heat-to-electricity conversion and is gaining attention as a clean, fuel-saving, and carbon-neutral solution for industrial, automotive, and marine applications. Despite nearly a century of research, apart from successes in deep-space power sources and solid-state cooling modules, the industrialization and commercialization of TE power generation remai… ▽ More Thermoelectric (TE) technology enables direct heat-to-electricity conversion and is gaining attention as a clean, fuel-saving, and carbon-neutral solution for industrial, automotive, and marine applications. Despite nearly a century of research, apart from successes in deep-space power sources and solid-state cooling modules, the industrialization and commercialization of TE power generation remain limited. Since the new millennium, nanostructured bulk materials have accelerated the discovery of new TE systems. However, due to limited access to high-temperature heat sources, energy harvesting still relies almost exclusively on BiTe-based alloys, which are the only system operating stably near room temperature. Although many BiTe-based compositions have been proposed, concerns over reproducibility, reliability, and lifetime continue to hinder industrial adoption. Here, we aim to develop reference BiTe-based thermoelectric materials through data-driven analysis of Starrydata2, the world's largest thermoelectric database. We identify Bi0.46Sb1.54Te3 and Bi2Te2.7Se0.3 as the most frequently studied ternary compositions. These were synthesized using hot pressing and spark-plasma sintering. Thermoelectric properties were evaluated with respect to the processing method and measurement direction. The results align closely with the median of reported data, confirming the representativeness of the selected compositions. We propose these as reference BiTe materials, accompanied by transparent data and validated benchmarks. Their use can support the standardization of TE legs and modules while accelerating performance evaluation and industrial integration. We further estimated the performance of a thermoelectric module made from the reference composition, which gives the power output of over 2.51 W and an efficiency of 3.58% at a temperature difference of 120 K. △ Less

Submitted 9 July, 2025; v1 submitted 8 July, 2025; originally announced July 2025.

Comments: 45 pages, 4 tables, 14 figures (DOI info added for future activation upon publication. Error updated for k_ph)

Process-aware and high-fidelity microstructure generation using stable diffusion

Authors: Hoang Cuong Phan, Minh Tien Tran, Chihun Lee, Hoheok Kim, Sehyok Oh, Dong-Kyu Kim, Ho Won Lee

Abstract: Synthesizing realistic microstructure images conditioned on processing parameters is crucial for understanding process-structure relationships in materials design. However, this task remains challenging due to limited training micrographs and the continuous nature of processing variables. To overcome these challenges, we present a novel process-aware generative modeling approach based on Stable Di… ▽ More Synthesizing realistic microstructure images conditioned on processing parameters is crucial for understanding process-structure relationships in materials design. However, this task remains challenging due to limited training micrographs and the continuous nature of processing variables. To overcome these challenges, we present a novel process-aware generative modeling approach based on Stable Diffusion 3.5 Large (SD3.5-Large), a state-of-the-art text-to-image diffusion model adapted for microstructure generation. Our method introduces numeric-aware embeddings that encode continuous variables (annealing temperature, time, and magnification) directly into the model's conditioning, enabling controlled image generation under specified process conditions and capturing process-driven microstructural variations. To address data scarcity and computational constraints, we fine-tune only a small fraction of the model's weights via DreamBooth and Low-Rank Adaptation (LoRA), efficiently transferring the pre-trained model to the materials domain. We validate realism using a semantic segmentation model based on a fine-tuned U-Net with a VGG16 encoder on 24 labeled micrographs. It achieves 97.1% accuracy and 85.7% mean IoU, outperforming previous methods. Quantitative analyses using physical descriptors and spatial statistics show strong agreement between synthetic and real microstructures. Specifically, two-point correlation and lineal-path errors remain below 2.1% and 0.6%, respectively. Our method represents the first adaptation of SD3.5-Large for process-aware microstructure generation, offering a scalable approach for data-driven materials design. △ Less

Submitted 1 July, 2025; originally announced July 2025.

Comments: 46 pages, 13 figures, 5 tables, 3rd Word Congress on Artificial Intelligence in Materials & Manufacturing 2025

An efficient forgetting-aware fine-tuning framework for pretrained universal machine-learning interatomic potentials

Authors: Jisu Kim, Jiho Lee, Sangmin Oh, Yutack Park, Seungwoo Hwang, Seungwu Han, Sungwoo Kang, Youngho Kang

Abstract: Pretrained universal machine-learning interatomic potentials (MLIPs) have revolutionized computational materials science by enabling rapid atomistic simulations as efficient alternatives to ab initio methods. Fine-tuning pretrained MLIPs offers a practical approach to improving accuracy for materials and properties where predictive performance is insufficient. However, this approach often induces… ▽ More Pretrained universal machine-learning interatomic potentials (MLIPs) have revolutionized computational materials science by enabling rapid atomistic simulations as efficient alternatives to ab initio methods. Fine-tuning pretrained MLIPs offers a practical approach to improving accuracy for materials and properties where predictive performance is insufficient. However, this approach often induces catastrophic forgetting, undermining the generalizability that is a key advantage of pretrained MLIPs. Herein, we propose reEWC, an advanced fine-tuning strategy that integrates Experience Replay and Elastic Weight Consolidation (EWC) to effectively balance forgetting prevention with fine-tuning efficiency. Using Li$_6$PS$_5$Cl (LPSC), a sulfide-based Li solid-state electrolyte, as a fine-tuning target, we show that reEWC significantly improves the accuracy of a pretrained MLIP, resolving well-known issues of potential energy surface softening and overestimated Li diffusivities. Moreover, reEWC preserves the generalizability of the pretrained MLIP and enables knowledge transfer to chemically distinct systems, including other sulfide, oxide, nitride, and halide electrolytes. Compared to Experience Replay and EWC used individually, reEWC delivers clear synergistic benefits, mitigating their respective limitations while maintaining computational efficiency. These results establish reEWC as a robust and effective solution for continual learning in MLIPs, enabling universal models that can advance materials research through large-scale, high-throughput simulations across diverse chemistries. △ Less

Submitted 18 June, 2025; originally announced June 2025.

Comments: 25 pages, 8 figures, Supplementary information included as ancillary file (+16 pages)

Imaging 3D polarization dynamics via deep learning 4D-STEM

Authors: Jinho Byun, Keeyong Lee, Myoungho Jeong, Eunha Lee, Jeongil Bang, Haeryong Kim, Geun Ho Gu, Sang Ho Oh

Abstract: Recent advances in ferroelectrics highlight the role of three-dimensional (3D) polar entities in forming topological polar textures and generating giant electromechanical responses, during polarization rotation. However, current electron microscopy methods lack the depth resolution to resolve the polarization component along the electron beam direction, which restricts full characterization. Here,… ▽ More Recent advances in ferroelectrics highlight the role of three-dimensional (3D) polar entities in forming topological polar textures and generating giant electromechanical responses, during polarization rotation. However, current electron microscopy methods lack the depth resolution to resolve the polarization component along the electron beam direction, which restricts full characterization. Here, we present a deep learning framework combined with four-dimensional scanning transmission electron microscopy to reconstruct 3D polarization maps in Ba0.5Sr0.5TiO3 thin-film capacitors with picometer-level accuracy under applied electric fields. Our approach enables observation of polar nanodomains consistent with the polar slush model and shows that switching occurs through coordinated vector rotation toward <111> energy minima, rather than magnitude changes. Furthermore, regions with higher topological density exhibit smaller polarization variation when the electric field changes, indicating topological protection. Our work reveals the value of 3D polarization mapping in elucidating complex nanoscale polar phenomena, with broad implications for emergent ferroelectrics. △ Less

Submitted 6 June, 2025; originally announced June 2025.

Comments: 30 pages, 14 figures

Ubiquity of rotational symmetry breaking in superconducting films, from Fe(Te,Se)/Bi$_2$Te$_3$ to Nb, and the effect of measurement geometry

Authors: Debarghya Mallick, Hee Taek Yi, Xiaoyu Yuan, Seongshik Oh

Abstract: FeTe$_{0.5}$Se$_{0.5}$/Bi$_2$Te$_3$ heterostructure is a promising new platform in the journey toward topological quantum computation, considering that first, FeTe$_{0.5}$Se$_{0.5}$ is itself known to be a topological superconductor (TSC) and second, the heterostructure has topological interface states that can be proximitized into TSC even if FTS fails to become TSC on its own. Here, we show that… ▽ More FeTe$_{0.5}$Se$_{0.5}$/Bi$_2$Te$_3$ heterostructure is a promising new platform in the journey toward topological quantum computation, considering that first, FeTe$_{0.5}$Se$_{0.5}$ is itself known to be a topological superconductor (TSC) and second, the heterostructure has topological interface states that can be proximitized into TSC even if FTS fails to become TSC on its own. Here, we show that this system exhibits quasi-2D superconductivity, and utilizing the standard in-plane magneto-transport measurements, we discover two-fold anisotropy (a.k.a nematicity) in R$_{xx}$ and I$_c$ measurement, even though the system exhibits globally 12-fold symmetry. Then, we carried out similar measurements on a polycrystalline niobium (Nb) thin film, a well-known s-wave elemental superconductor, and found a similar two-fold symmetry even for this Nb system. This implies either that nematic behavior is ubiquitous or that the in-plane magneto-transport measurement scheme routinely used to detect nematicity is not a reliable method to probe nematicity. We show that the angle-dependent response of vortices in the superconducting regime to the magnetic Lorentz force is very likely the main cause behind the ubiquitous nematic behaviors of this measurement scheme. In other words, this measurement scheme is intrinsically two-fold, and is therefore not suitable to detect the nematicity. Accordingly, all the previous reports of nematicity based on similar measurement practices, reported on various samples, including thin films, bulk crystals, and exfoliated flakes, need to be reinterpreted. △ Less

Submitted 24 May, 2025; originally announced May 2025.

Self-heating electrochemical memory for high-precision analog computing

Authors: Adam L. Gross, Sangheon Oh, François Léonard, Wyatt Hodges, T. Patrick Xiao, Joshua D. Sugar, Jacklyn Zhu, Sritharini Radhakrishnan, Sangyong Lee, Jolie Wang, Adam Christensen, Sam Lilak, Patrick S. Finnegan, Patrick Crandall, Christopher H. Bennett, William Wahby, Robin Jacobs-Gedrim, Matthew J. Marinella, Suhas Kumar, Sapan Agarwal, Yiyang Li, A. Alec Talin, Elliot J. Fuller

Abstract: Analog computers hold promise to significantly reduce the energy consumption of artificial intelligence algorithms, but commercialization has been hampered by a fundamental scientific challenge - how to reliably store and process analog information with high precision. We present an approach based upon metal oxide memory cells that undergo controlled self-heating during programming with a newly de… ▽ More Analog computers hold promise to significantly reduce the energy consumption of artificial intelligence algorithms, but commercialization has been hampered by a fundamental scientific challenge - how to reliably store and process analog information with high precision. We present an approach based upon metal oxide memory cells that undergo controlled self-heating during programming with a newly developed, electro-thermo-chemical gate. The gate uniformly spreads heat and electrochemical reactions to enable wide, bulk-vacancy modulation which yields nine orders of magnitude in tunable analog resistance - three orders greater than other devices reported, with thousands of states. The gating profoundly reduces noise and drift to enable precision programming to targeted states within a few operations, lowering conductance errors by two orders of magnitude relative to other devices reported. Simulations show improvement in computational energy efficiency by at least 10x over other devices due to far greater scalability at higher precision. The results overturn long-held assumptions about the poor reliability and precision of analog resistance devices and opens the door to manufacturable, bulk metal-oxide devices and new applications that leverage high precision. △ Less

Submitted 1 July, 2025; v1 submitted 21 May, 2025; originally announced May 2025.

Tailoring the Electronic Configurations of YPc$_2$ on Cu(111): Decoupling Strategies for Molecular Spin Qubits Platforms

Authors: Soyoung Oh, Franklin. H. Cho, We-hyo Soe, Jisoo Yu, Hong Bui, Lukas Spree, Caroline Hommel, Wonjun Jang, Soo-hyon Phark, Luciano Colazzo, Christoph Wolf, Fabio Donati

Abstract: Among the potential spin qubit candidates, yttrium phthalocyanine double-decker (YPc$_2$) features a diamagnetic metal ion core that stabilizes the molecular structure, while its magnetic properties arise primarily from an unpaired electron (S=1/2) delocalized over the two phthalocyanine (Pc) ligands. Understanding its properties in the proximity of metal electrodes is crucial to assess its potent… ▽ More Among the potential spin qubit candidates, yttrium phthalocyanine double-decker (YPc$_2$) features a diamagnetic metal ion core that stabilizes the molecular structure, while its magnetic properties arise primarily from an unpaired electron (S=1/2) delocalized over the two phthalocyanine (Pc) ligands. Understanding its properties in the proximity of metal electrodes is crucial to assess its potential use in molecular spin qubits architectures. Here, we investigated the morphology and electronic structure of this molecule adsorbed on Cu(111) surface using scanning tunneling microscopy (STM). On Cu(111), YPc$_2$ adsorbs flat, with isolated molecules showing a preferred orientation along the <111> crystal axes. Moreover, we observed two different types of self-assembly molecular packing when growing molecular patches. For YPc$_2$ in direct contact with Cu(111), STM revealed a widely separated highest occupied and lowest unoccupied molecular orbitals (HOMO/LUMO), suggesting the quenching of the unpaired spin. Conversely, when YPc$_2$ is separated from the metal substrate by a few-layer thick diamagnetic zinc phthalocyanine (ZnPc) layer, we found the HOMO to split into singly occupied and singly unoccupied molecular orbitals (SOMO/SUMO). We observed that more than 2 layers of ZnPc are needed to avoid intermixing between the two molecules and spin quenching in YPc2. Density functional theory (DFT) reveals the spin quenching is due to the hybridization between YPc$_2$ and Cu(111) states, confirming the importance of using suitable decoupling layers to preserve the unpaired molecular spin. Our results suggest the potential of YPc$_2$/ZnPc heterostructures as a stable and effective molecular spin qubit platform and validate the possibility of integrating this molecular spin qubit candidate in future quantum logic devices. △ Less

Submitted 12 June, 2025; v1 submitted 21 May, 2025; originally announced May 2025.

Planckian scattering and parallel conduction channels in the iron chalcogenide superconductors FeTe$_{1-x}$Se$_x$

Authors: Ralph Romero III, Hee Taek Yi, Seongshik Oh, N. P. Armitage

Abstract: The remarkable linear in temperature resistivity of the cuprate superconductors, which extends in some samples from $T_c$ to the melting temperature, remains unexplained. Although seemingly simple, this temperature dependence is incompatible with the conventional theory of metals that dictates that the scattering rate, $1/τ$, should be quadratic in temperature if electron-electron scattering domin… ▽ More The remarkable linear in temperature resistivity of the cuprate superconductors, which extends in some samples from $T_c$ to the melting temperature, remains unexplained. Although seemingly simple, this temperature dependence is incompatible with the conventional theory of metals that dictates that the scattering rate, $1/τ$, should be quadratic in temperature if electron-electron scattering dominates. Understanding the origin of this temperature dependence and its connection to superconductivity may provide the key to pick the lock of high-temperature superconductivity. Using time-domain terahertz spectroscopy (TDTS) we elucidate the low temperature conducting behavior of two FeTe$_{1-x}$Se$_x$ (FTS) samples, one with almost equal amounts of Se and Te that is believed to be a topological superconductor, and one that is more overdoped. Constrained with DC resistivity, we find two conduction channels that add in parallel, a broad one in frequency with weak temperature dependence and a sharper one whose scattering rate goes as the Planckian limited rate, $\sim kT/h$. Through analysis of its spectral weight we show the superconducting condensate is mainly drawn from the channel that undergoes this Planckian scattering. △ Less

Submitted 1 May, 2025; originally announced May 2025.

Kramers nodal lines in intercalated TaS$_2$ superconductors

Authors: Yichen Zhang, Yuxiang Gao, Aki Pulkkinen, Xingyao Guo, Jianwei Huang, Yucheng Guo, Ziqin Yue, Ji Seop Oh, Alex Moon, Mohamed Oudah, Xue-Jian Gao, Alberto Marmodoro, Alexei Fedorov, Sung-Kwan Mo, Makoto Hashimoto, Donghui Lu, Anil Rajapitamahuni, Elio Vescovo, Junichiro Kono, Alannah M. Hallas, Robert J. Birgeneau, Luis Balicas, Ján Minár, Pavan Hosur, Kam Tuen Law , et al. (2 additional authors not shown)

Abstract: Kramers degeneracy is one fundamental embodiment of the quantum mechanical nature of particles with half-integer spin under time reversal symmetry. Under the chiral and noncentrosymmetric achiral crystalline symmetries, Kramers degeneracy emerges respectively as topological quasiparticles of Weyl fermions and Kramers nodal lines (KNLs), anchoring the Berry phase-related physics of electrons. Howev… ▽ More Kramers degeneracy is one fundamental embodiment of the quantum mechanical nature of particles with half-integer spin under time reversal symmetry. Under the chiral and noncentrosymmetric achiral crystalline symmetries, Kramers degeneracy emerges respectively as topological quasiparticles of Weyl fermions and Kramers nodal lines (KNLs), anchoring the Berry phase-related physics of electrons. However, an experimental demonstration for ideal KNLs well isolated at the Fermi level is lacking. Here, we establish a class of noncentrosymmetric achiral intercalated transition metal dichalcogenide superconductors with large Ising-type spin-orbit coupling, represented by In$_x$TaS$_2$, to host an ideal KNL phase. We provide evidence from angle-resolved photoemission spectroscopy with spin resolution, angle-dependent quantum oscillation measurements, and ab-initio calculations. Our work not only provides a realistic platform for realizing and tuning KNLs in layered materials, but also paves the way for exploring the interplay between KNLs and superconductivity, as well as applications pertaining to spintronics, valleytronics, and nonlinear transport. △ Less

Submitted 29 May, 2025; v1 submitted 11 March, 2025; originally announced March 2025.

Comments: 40 pages, 5 figures. Supplementary information PDF included in TeX Source

Journal ref: Nat. Commun. 16, 4984 (2025)

Single-layer magnet phase in intrinsic magnetic topological insulators, $[\mathrm{MnTe}][\mathrm{Bi}_{2}\mathrm{Te}_{3}]_{\mathrm{n}}$, far beyond the thermodynamic limit

Authors: Deepti Jain, Hee Taek Yi, Xiong Yao, Alessandro R. Mazza, An-Hsi Chen, Kim Kisslinger, Myung-Geun Han, Matthew Brahlek, Seongshik Oh

Abstract: The intrinsic magnetic topological insulator (IMTI) family $[\mathrm{MnTe}][\mathrm{Bi}_{2}\mathrm{Te}_{3}]_{\mathrm{n}}$ has demonstrated magneto-topological properties dependent on $n$, making it a promising platform for advanced electronics and spintronics. However, due to technical barriers in sample synthesis, their properties in the large $n$ limit remain unknown. To overcome this, we utiliz… ▽ More The intrinsic magnetic topological insulator (IMTI) family $[\mathrm{MnTe}][\mathrm{Bi}_{2}\mathrm{Te}_{3}]_{\mathrm{n}}$ has demonstrated magneto-topological properties dependent on $n$, making it a promising platform for advanced electronics and spintronics. However, due to technical barriers in sample synthesis, their properties in the large $n$ limit remain unknown. To overcome this, we utilized the atomic layer-by-layer molecular beam epitaxy (ALL-MBE) technique and achieved IMTIs with $n$ as large as 15, far beyond the previously reported in bulk crystals or thin films. Then, we discover that the "single-layer magnet (SLM)" phase, primarily determined by intralayer ferromagnetic coupling, emerges for $n >$ $\sim 4$ and remains little affected up to $n = 15$. Nonetheless, still, non-zero, interlayer ferromagnetic coupling is necessary to stabilize the SLM phase, suggesting that the SLM phase eventually disappears in the $n\to\infty$ limit. This study uncovers the secrets of IMTIs beyond the thermodynamic limit and opens a door to diverse magneto-topological applications. △ Less

Submitted 8 March, 2025; originally announced March 2025.

Quantum decoherence of nitrogen-vacancy spin ensembles in a nitrogen spin bath in diamond under dynamical decoupling

Authors: Huijin Park, Mykyta Onizhuk, Eunsang Lee, Harim Lim, Junghyun Lee, Sangwon Oh, Giulia Galli, Hosung Seo

Abstract: The negatively charged nitrogen-vacancy (NV) center in diamond has emerged as a leading qubit platform for quantum technology applications. One of the key challenges for NV-based quantum applications is building an accurate model to predict its decoherence properties and their quantum nature. In this study, we combine theory and experiment to investigate NV decoherence dynamics in the presence of… ▽ More The negatively charged nitrogen-vacancy (NV) center in diamond has emerged as a leading qubit platform for quantum technology applications. One of the key challenges for NV-based quantum applications is building an accurate model to predict its decoherence properties and their quantum nature. In this study, we combine theory and experiment to investigate NV decoherence dynamics in the presence of nitrogen donor (P1 center) baths, which is one of the dominant decoherence sources in diamond. We employ a cluster-correlation expansion (CCE) method to compute the NV decoherence under the Hahn-echo (HE) and Carr-Purcell-Meiboom-Gill (CPMG) pulse sequences at various P1 concentrations from 1ppm to 300 ppm. We show that the coherence time (T2) increases with the number of pi pulses applied, indicating that the NV spin is decoupled from the P1 bath. Notably, we find that T2 scales quadratically as a function of the pulse number, on a logarithmic scale, as opposed to the linear scaling predicted by widely accepted semi-classical theories in the literature. In our experiment, we measure the CPMG signal for two diamond samples with high P1 concentrations of 0.8ppm and 13ppm. We demonstrate that the T2 scaling is indeed quadratic, thus confirming our theoretical predictions. Our results show that the quantum bath model combined with the CCE method can accurately capture the quantum nature of the P1-driven NV decoherence. Our study opens a new avenue for developing a complete noise model that could be used to optimize the performance of NV-based quantum devices. △ Less

Submitted 7 March, 2025; originally announced March 2025.

Comments: 29 pages, 5 figures, 1 table, 81 references

Interfacial strong coupling and negative dispersion of propagating polaritons in freestanding oxide membranes

Authors: Brayden Lukaskawcez, Shivasheesh Varshney, Sooho Choo, Sang Hyun Park, Dongjea Seo, Liam Thompson, Nitzan Hirshberg, Madison Garber, Devon Uram, Hayden Binger, Steven Koester, Sang-Hyun Oh, Tony Low, Bharat Jalan, Alexander McLeod

Abstract: Membranes of complex oxides like perovskite SrTiO3 extend the multi-functional promise of oxide electronics into the nanoscale regime of two-dimensional materials. Here we demonstrate that free-standing oxide membranes supply a reconfigurable platform for nano-photonics based on propagating surface phonon polaritons. We apply infrared near-field imaging and -spectroscopy enabled by a tunable ultra… ▽ More Membranes of complex oxides like perovskite SrTiO3 extend the multi-functional promise of oxide electronics into the nanoscale regime of two-dimensional materials. Here we demonstrate that free-standing oxide membranes supply a reconfigurable platform for nano-photonics based on propagating surface phonon polaritons. We apply infrared near-field imaging and -spectroscopy enabled by a tunable ultrafast laser to study pristine nano-thick SrTiO3 membranes prepared by hybrid molecular beam epitaxy. As predicted by coupled mode theory, we find that strong coupling of interfacial polaritons realizes symmetric and antisymmetric hybridized modes with simultaneously tunable negative and positive group velocities. By resolving reflection of these propagating modes from membrane edges, defects, and substrate structures, we quantify their dispersion with position-resolved nano-spectroscopy. Remarkably, we find polariton negative dispersion is both robust and tunable through choice of membrane dielectric environment and thickness and propose a novel design for in-plane Veselago lensing harnessing this control. Our work lays the foundation for tunable transformation optics at the nanoscale using polaritons in a wide range of freestanding complex oxide membranes. △ Less

Submitted 27 June, 2025; v1 submitted 2 March, 2025; originally announced March 2025.

Comments: Main text: 30 pages, 5 figures. Supplementary information: 21 pages, 8 figures, 2 tables

Tunneling magnetoresistance in altermagnetic RuO$_2$-based magnetic tunnel junctions

Authors: Seunghyeon Noh, Gye-Hyeon Kim, Jiyeon Lee, Hyeonjung Jung, Uihyeon Seo, Gimok So, Jaebyeong Lee, Seunghyun Lee, Miju Park, Seungmin Yang, Yoon Seok Oh, Hosub Jin, Changhee Sohn, Jung-Woo Yoo

Abstract: Altermagnets exhibit characteristics akin to antiferromagnets, with spin-split anisotropic bands in momentum space. RuO$_2$ has been considered as a prototype altermagnet; however, recent reports have questioned altermagnetic ground state in this material. In this study, we provide direct experimental evidence of altermagnetic characteristics in RuO$_2$ films by demonstrating spin-dependent tunnel… ▽ More Altermagnets exhibit characteristics akin to antiferromagnets, with spin-split anisotropic bands in momentum space. RuO$_2$ has been considered as a prototype altermagnet; however, recent reports have questioned altermagnetic ground state in this material. In this study, we provide direct experimental evidence of altermagnetic characteristics in RuO$_2$ films by demonstrating spin-dependent tunneling magnetoresistance (TMR) in RuO$_2$-based magnetic tunnel junctions. Our results show the spin-splitted anisotropic band structure of RuO$_2$, with the observed TMR determined by the direction of the Néel vector of RuO$_2$. These results reflect the altermagnetic nature of RuO$_2$ and highlight its potential for spintronic applications, leveraging the combined strengths of ferromagnetic and antiferromagnetic systems. △ Less

Submitted 19 February, 2025; originally announced February 2025.

Universal Superconductivity in FeTe and All-Iron-Based Ferromagnetic Superconductor Heterostructures

Authors: Hee Taek Yi, Xiong Yao, Deepti Jain, Ying-Ting Chan, An-Hsi Chen, Matthew Brahlek, Kim Kisslinger, Kai Du, Myung-Geun Han, Yimei Zhu, Weida Wu, Sang-Wook Cheong, Seongshik Oh

Abstract: Ferromagnetism (FM) and superconductivity (SC) are two of the most famous macroscopic quantum phenomena. However, nature normally does not allow SC and FM to coexist without significant degradation. Here, we introduce the first fully iron-based SC/FM heterostructures, composed of Fe(Te,Se) and Fe3GeTe2, and show that in this platform strong FM and high-temperature SC robustly coexist. We subsequen… ▽ More Ferromagnetism (FM) and superconductivity (SC) are two of the most famous macroscopic quantum phenomena. However, nature normally does not allow SC and FM to coexist without significant degradation. Here, we introduce the first fully iron-based SC/FM heterostructures, composed of Fe(Te,Se) and Fe3GeTe2, and show that in this platform strong FM and high-temperature SC robustly coexist. We subsequently discover that chemical proximity effect from neighboring layers can universally drive the otherwise non-superconducting FeTe films into a SC state. This suggests that the ground state of FeTe is so close to the SC state that it could be driven in and out of the SC state with various other perturbations. Altogether, this shows that Fe-Te-based heterostructures provide a unique opportunity to manipulate magnetism, superconductivity and topological physics, paving the way toward new superconducting technologies. △ Less

Submitted 3 February, 2025; originally announced February 2025.

Journal ref: Adv. Funct. Mater. 2025, 2418259

Relationship between the boson peak and first sharp diffraction peak in glasses

Authors: Dan Kyotani, Soo Han Oh, Suguru Kitani, Yasuhiro Fujii, Hiroyuki Hijiya, Hideyuki Mizuno, Shinji Kohara, Akitoshi Koreeda, Atsunobu Masuno, Hitoshi Kawaji, Seiji Kojima, Yohei Yamamoto, Tatsuya Mori

Abstract: Boson peak (BP) dynamics refers to the universal excitation in the terahertz region of glass. In this study, the universal dynamics of BP were quantitatively evaluated in various glassy materials based on the heterogeneous elasticity theory (HET), and the determinants of BP were successfully extracted. A strong correlation was observed between the maximum possible coarse-graining wavenumber, which… ▽ More Boson peak (BP) dynamics refers to the universal excitation in the terahertz region of glass. In this study, the universal dynamics of BP were quantitatively evaluated in various glassy materials based on the heterogeneous elasticity theory (HET), and the determinants of BP were successfully extracted. A strong correlation was observed between the maximum possible coarse-graining wavenumber, which is a determinant of the BP in the HET, and the first sharp diffraction peak (FSDP) wavenumber, which is a characteristic index of the medium-range order in glasses. The results indicate that the behaviour of BP in glass can be quantitatively understood in the following two steps. First, the FSDP representing the largest structural correlation in glass is dominantly used to determine the unit size of the elastic modulus heterogeneity, and second, the magnitude of the elastic modulus fluctuation is used to determine the frequency and intensity of the BP. △ Less

Submitted 10 January, 2025; originally announced January 2025.

Dielectrophoresis-Enhanced Graphene Field-Effect Transistors for Nano-Analyte Sensing

Authors: Nezhueyotl Izquierdo, Ruixue Li, Peter R. Christenson, Sang-Hyun Oh, Steven J. Koester

Abstract: Dielectrophoretic (DEP) sensing is an extremely important sensing modality that enables the rapid capture and detection of polarizable particles of nano-scale size. This makes it a versatile tool for applications in medical diagnostics, environmental monitoring, and materials science. Because DEP relies upon the creation of sharp electrode edges, its sensitivity is fundamentally limited by the ele… ▽ More Dielectrophoretic (DEP) sensing is an extremely important sensing modality that enables the rapid capture and detection of polarizable particles of nano-scale size. This makes it a versatile tool for applications in medical diagnostics, environmental monitoring, and materials science. Because DEP relies upon the creation of sharp electrode edges, its sensitivity is fundamentally limited by the electrode thickness. Graphene, with its monolayer thickness, enables scaling of the DEP force, allowing trapping of particles at graphene edges at ultra-low voltages. However, to date, this enhanced trapping efficiency of graphene has not been translated into an effective sensing geometry. Here, we demonstrate the expansion of graphene DEP trapping capability into a graphene field effect transistor (GFET) geometry that allows the trapped particles to be electrically detected. This four-terminal multi-functional hybrid device structure operates in three distinct modes: DEP, GFET, and DEP-GFET. By segmenting the channel of the GFET into multiple parallel channels, greatly increased density of particle trapping is demonstrated using fluorescence microscopy analysis. We show further enhancement of the trapping efficiency using engineered "nano-sites," which are holes in the graphene with size on the order of 200-300 nm. Scanning electron microscope analysis of immobilized gold nanoparticles (AuNPs) shows trapping efficiency >90% for properly engineered nano-sites. Using nano-site trapping, we also demonstrate real-time, rapid electrical sensing of AuNPs, with >2% current change occurring in 4.1 seconds, as well as rapid sensing of a variety of biomolecule-coated nanoparticles. This work shows that graphene DEP is an effective platform for nanoparticle and bio-molecule sensing that overcomes diffusion-limited and Brownian motion-based interactions. △ Less

Submitted 16 December, 2024; originally announced December 2024.

Comments: 21 pages, 5 figures, supporting information included

The Geometry of Fixed-Magnetization Spin Systems at Low Temperature

Authors: Jacob Calvert, Shunhao Oh, Dana Randall

Abstract: Spin systems are fundamental models of statistical physics that provide insight into collective behavior across scientific domains. Their interest to computer science stems in part from the deep connection between the phase transitions they exhibit and the computational complexity of sampling from the probability distributions they describe. Our focus is on the geometry of spin configurations, mot… ▽ More Spin systems are fundamental models of statistical physics that provide insight into collective behavior across scientific domains. Their interest to computer science stems in part from the deep connection between the phase transitions they exhibit and the computational complexity of sampling from the probability distributions they describe. Our focus is on the geometry of spin configurations, motivated by applications to programmable matter and computational biology. Rigorous results in this vein are scarce because the natural setting of these applications is the low-temperature, fixed-magnetization regime. Recent progress in this regime is largely limited to spin systems under which magnetization concentrates, which enables the analysis to be reduced to that of the simpler, variable-magnetization case. More complicated models, like those that arise in applications, do not share this property. We study the geometry of spin configurations on the triangular lattice under the Generalized Potts Model (GPM), which generalizes many fundamental models of statistical physics, including the Ising, Potts, clock, and Blume--Capel models. Moreover, it specializes to models used to program active matter to solve tasks like compression and separation, and it is closely related to the Cellular Potts Model, widely used in computational models of biological processes. Our main result shows that, under the fixed-magnetization GPM at low temperature, spins of different types are typically partitioned into regions of mostly one type, separated by boundaries that have nearly minimal perimeter. The proof uses techniques from Pirogov--Sinai theory to extend a classic Peierls argument for the fixed-magnetization Ising model, and introduces a new approach for comparing the partition functions of fixed- and variable-magnetization models. △ Less

Submitted 24 April, 2025; v1 submitted 5 November, 2024; originally announced November 2024.

Wiedemann-Franz Law and Thermoelectric Inequalities: Effective ZT and Single-leg Efficiency Overestimation

Authors: Byungki Ryu, Seunghyun Oh, Wabi Demeke, Jaywan Chung, Jongho Park, Nirma Kumari, Aadil Fayaz Wani, Seunghwa Ryu, SuDong Park

Abstract: We derive a thermoelectric inequality in thermoelectric conversion between the material figure of merit (ZT) and the module effective ZT using the Constant Seebeck-coefficient Approximation combining with the Wiedemann-Franz law. In a P-N leg-pair module, the effective ZT lies between the individual ZT values of the P- and N-legs. In a single-leg module, however, the effective ZT is less than appr… ▽ More We derive a thermoelectric inequality in thermoelectric conversion between the material figure of merit (ZT) and the module effective ZT using the Constant Seebeck-coefficient Approximation combining with the Wiedemann-Franz law. In a P-N leg-pair module, the effective ZT lies between the individual ZT values of the P- and N-legs. In a single-leg module, however, the effective ZT is less than approximately one-third of the leg's ZT. This reduction results from the need for an external wire to complete the circuit, introducing additional thermal and electrical losses. Multi-dimensional numerical analysis shows that, although structural optimization can mitigate these losses, the system efficiency remains limited to below half of the ideal single-leg material efficiency. Our findings explain the single-leg efficiency overestimation and highlight the importance of optimizing the P-N leg-pair module structure. They also underscore the need for thermoelectric leg-compatibility, particularly with respect to Seebeck coefficients. △ Less

Submitted 5 November, 2024; v1 submitted 3 November, 2024; originally announced November 2024.

Comments: (main) 17 pages, 1 table, 3 figures, 15 references (all including Supporting Materials) 24 pages, 2 supporting tables, 2 supporting figures

Journal ref: Journal of Applied Physics 137, 115001 (2025)

Microwave power and chamber pressure studies for single-crystalline diamond film growth using microwave plasma CVD

Authors: Truong Thi Hien, Jaesung Park, Cuong Manh Nguyen, Jeong Hyun Shim, Sangwon Oh

Abstract: A smooth diamond film, characterized by exceptional thermal conductivity, chemical stability, and optical properties, is highly suitable for a wide range of advanced applications. However, achieving uniform film quality presents a significant challenge for the CVD method due to non-uniformities in microwave distribution, electric fields, and the densities of reactive radicals during deposition pro… ▽ More A smooth diamond film, characterized by exceptional thermal conductivity, chemical stability, and optical properties, is highly suitable for a wide range of advanced applications. However, achieving uniform film quality presents a significant challenge for the CVD method due to non-uniformities in microwave distribution, electric fields, and the densities of reactive radicals during deposition processes involving $CH_4$ and $H_2$ precursors. Here, we systematically investigate the effects of microwave power and chamber pressure on surface roughness, crystalline quality, and the uniformity of diamond films. These findings provide valuable insights into the production of atomically smooth, high-quality diamond films with enhanced uniformity. By optimizing deposition parameters, we achieved a root-mean-square (RMS) surface roughness of 2 nm, comparable to high-pressure, high-temperature (HPHT) diamond substrates. Moreover, these conditions facilitated the formation of a pure single-crystal diamond phase, confirmed by the absence of contamination peaks in the Raman spectra △ Less

Submitted 14 January, 2025; v1 submitted 1 November, 2024; originally announced November 2024.

Mystery of superconductivity in FeTe films and the role of neighboring layers

Authors: Xiong Yao, Hee Taek Yi, Deepti Jain, Xiaoyu Yuan, Seongshik Oh

Abstract: Since the discovery of superconductivity in the Fe(Te,Se) system, it has been a general consensus that the end member of FeTe is not superconducting. Nonetheless, in recent years, there have been reports of superconducting FeTe films, but the origin of their superconductivity remains mysterious. Here, we provide the first comprehensive review of all the reported FeTe films regarding the relationsh… ▽ More Since the discovery of superconductivity in the Fe(Te,Se) system, it has been a general consensus that the end member of FeTe is not superconducting. Nonetheless, in recent years, there have been reports of superconducting FeTe films, but the origin of their superconductivity remains mysterious. Here, we provide the first comprehensive review of all the reported FeTe films regarding the relationship between their superconductivity and neighboring layers. Based on this review, we show that telluride neighboring layers are the key to superconducting FeTe films. Then, with additional new studies, we show that stoichiometric Te content, which can be readily achieved in FeTe films with the assistance of neighboring telluride layers, might be crucial to stabilizing the superconductivity in this system. This work provides insights into the underlying mechanism behind superconductivity in FeTe films and sheds light on the critical role of neighboring layers and stoichiometry control toward manipulating topological superconductivity in FeTe heterostructures. △ Less

Submitted 23 October, 2024; originally announced October 2024.

Comments: 16 pages, 4 figures

Journal ref: APL Mater. 13, 011116 (2025)

Exploring growing complex systems with higher-order interactions

Authors: Soo Min Oh, Yongsun Lee, Byungnam Kahng

Abstract: A complex system with many interacting individuals can be represented by a network consisting of nodes and links representing individuals and pairwise interactions, respectively. However, real-world systems grow with time and include many higher-order interactions. Such systems with higher-order interactions can be well described by a simplicial complex (SC), which is a type of hypergraph, consist… ▽ More A complex system with many interacting individuals can be represented by a network consisting of nodes and links representing individuals and pairwise interactions, respectively. However, real-world systems grow with time and include many higher-order interactions. Such systems with higher-order interactions can be well described by a simplicial complex (SC), which is a type of hypergraph, consisting of simplexes representing sets of multiple interacting nodes. Here, capturing the properties of growing real-world systems, we propose a growing random SC (GRSC) model where a node is added and a higher dimensional simplex is established among nodes at each time step. We then rigorously derive various percolation properties in the GRSC. Finally, we confirm that the system exhibits an infinite-order phase transition as higher-order interactions accelerate the growth of the system and result in the advanced emergence of a giant cluster. This work can pave the way for interpreting growing complex systems with higher-order interactions such as social, biological, brain, and technological systems. △ Less

Submitted 11 November, 2024; v1 submitted 8 October, 2024; originally announced October 2024.

Comments: 8 pages, 6 figures

Fast Virtual Gate Extraction For Silicon Quantum Dot Devices

Authors: Shize Che, Seong W Oh, Haoyun Qin, Yuhao Liu, Anthony Sigillito, Gushu Li

Abstract: Silicon quantum dot devices stand as promising candidates for large-scale quantum computing due to their extended coherence times, compact size, and recent experimental demonstrations of sizable qubit arrays. Despite the great potential, controlling these arrays remains a significant challenge. This paper introduces a new virtual gate extraction method to quickly establish orthogonal control on th… ▽ More Silicon quantum dot devices stand as promising candidates for large-scale quantum computing due to their extended coherence times, compact size, and recent experimental demonstrations of sizable qubit arrays. Despite the great potential, controlling these arrays remains a significant challenge. This paper introduces a new virtual gate extraction method to quickly establish orthogonal control on the potentials for individual quantum dots. Leveraging insights from the device physics, the proposed approach significantly reduces the experimental overhead by focusing on crucial regions around charge state transition. Furthermore, by employing an efficient voltage sweeping method, we can efficiently pinpoint these charge state transition lines and filter out erroneous points. Experimental evaluation using real quantum dot chip datasets demonstrates a substantial 5.84x to 19.34x speedup over conventional methods, thereby showcasing promising prospects for accelerating the scaling of silicon spin qubit devices. △ Less

Submitted 23 September, 2024; originally announced September 2024.

Comments: 61st Design Automation Conference

Direct Observation and Analysis of Low-Energy Magnons with Raman Spectroscopy in Atomically Thin NiPS3

Authors: Woongki Na, Pyeongjae Park, Siwon Oh, Junghyun Kim, Allen Scheie, David Alan Tennant, Hyun Cheol Lee, Je-Geun Park, Hyeonsik Cheong

Abstract: Van der Waals (vdW) magnets have rapidly emerged as a fertile playground for novel fundamental physics and exciting applications. Despite the impressive developments over the past few years, technical limitations pose a severe challenge to many other potential breakthroughs. High on the list is the lack of suitable experimental tools for studying spin dynamics on atomically thin samples. Here, Ram… ▽ More Van der Waals (vdW) magnets have rapidly emerged as a fertile playground for novel fundamental physics and exciting applications. Despite the impressive developments over the past few years, technical limitations pose a severe challenge to many other potential breakthroughs. High on the list is the lack of suitable experimental tools for studying spin dynamics on atomically thin samples. Here, Raman scattering techniques are employed to observe directly the low-lying magnon (~1 meV) even in bilayer NiPS3. The unique advantage is that it offers excellent energy resolutions far better on low-energy sides than most inelastic neutron spectrometers can offer. More importantly, with appropriate theoretical analysis, the polarization dependence of the Raman scattering by those low-lying magnons also provides otherwise hidden information on the dominant spin-exchange scattering paths for different magnons. By comparing with high-resolution inelastic neutron scattering data, these low-energy Raman modes are confirmed to be indeed of magnon origin. Because of the different scattering mechanisms involved in inelastic neutron and Raman scattering, this new information is fundamental in pinning down the final spin Hamiltonian. This work demonstrates the capability of Raman spectroscopy to probe the genuine two-dimensional spin dynamics in atomically-thin vdW magnets, which can provide novel insights that are obscured in bulk spin dynamics. △ Less

Submitted 29 July, 2024; originally announced July 2024.

Comments: 37 pages, 5 figures, supplementary information 11 pages

Atomic-Layer-Controlled Magnetic Orders in MnBi2Te4-Bi2Te3 Topological Heterostructures

Authors: Xiong Yao, Qirui Cui, Zengle Huang, Xiaoyu Yuan, Hee Taek Yi, Deepti Jain, Kim Kisslinger, Myung-Geun Han, Weida Wu, Hongxin Yang, Seongshik Oh

Abstract: The natural van der Waals superlattice MnBi2Te4-(Bi2Te3)m provides an optimal platform to combine topology and magnetism in one system with minimal structural disorder. Here, we show that this system can harbor both ferromagnetic (FM) and antiferromagnetic (AFM) orders and that these magnetic orders can be controlled in two different ways by either varying the Mn-Mn distance while keeping the Bi2T… ▽ More The natural van der Waals superlattice MnBi2Te4-(Bi2Te3)m provides an optimal platform to combine topology and magnetism in one system with minimal structural disorder. Here, we show that this system can harbor both ferromagnetic (FM) and antiferromagnetic (AFM) orders and that these magnetic orders can be controlled in two different ways by either varying the Mn-Mn distance while keeping the Bi2Te3/MnBi2Te4 ratio constant or vice versa. We achieve this by creating atomically engineered sandwich structures composed of Bi2Te3 and MnBi2Te4 layers. We show that the AFM order is exclusively determined by the Mn-Mn distance whereas the FM order depends only on the overall Bi2Te3/MnBi2Te4 ratio regardless of the distance between the MnBi2Te4 layers. Our results shed light on the origins of the AFM and FM orders and provide insights into how to manipulate magnetic orders not only for the MnBi2Te4-Bi2Te3 system but also for other magneto-topological materials. △ Less

Submitted 20 July, 2024; originally announced July 2024.

Comments: 25 pages, 5 figures, accepted to Nano Letters

Resilient Growth of Highly Crystalline Topological Insulator-Superconductor Heterostructure Enabled by Ex-situ Nitride Film

Authors: Renjie Xie, Min Ge, Shaozhu Xiao, Jiahui Zhang, Jiachang Bi, Xiaoyu Yuan, Hee Taek Yi, Baomin Wang, Seongshik Oh, Yanwei Cao, Xiong Yao

Abstract: Highly crystalline and easily feasible topological insulator-superconductor (TI-SC) heterostructures are crucial for the development of practical topological qubit devices. The optimal superconducting layer for TI-SC heterostructures should be highly resilient against external contaminations and structurally compatible with TIs. In this study, we provide a solution to this challenge by showcasing… ▽ More Highly crystalline and easily feasible topological insulator-superconductor (TI-SC) heterostructures are crucial for the development of practical topological qubit devices. The optimal superconducting layer for TI-SC heterostructures should be highly resilient against external contaminations and structurally compatible with TIs. In this study, we provide a solution to this challenge by showcasing the growth of a highly crystalline TI-SC heterostructure using refractory TiN (111) as the superconducting layer. This approach can eliminate the need for in-situ cleaving or growth. More importantly, the TiN surface shows high resilience against contaminations during air exposure, as demonstrated by the successful recyclable growth of Bi2Se3. Our findings indicate that TI-SC heterostructures based on nitride films are compatible with device fabrication techniques, paving a path to the realization of practical topological qubit devices in the future. △ Less

Submitted 10 June, 2024; originally announced June 2024.

Comments: 22 pages, 4 figures, accepted by ACS Applied Materials & Interfaces

Ubiquitous Flat Bands in a Cr-based Kagome Superconductor

Authors: Yucheng Guo, Zehao Wang, Fang Xie, Yuefei Huang, Bin Gao, Ji Seop Oh, Han Wu, Zhaoyu Liu, Zheng Ren, Yuan Fang, Ananya Biswas, Yichen Zhang, Ziqin Yue, Cheng Hu, Chris Jozwiak, Aaron Bostwick, Eli Rotenberg, Makoto Hashimoto, Donghui Lu, Junichiro Kono, Jiun-Haw Chu, Boris I Yakobson, Robert J Birgeneau, Qimiao Si, Pengcheng Dai , et al. (1 additional authors not shown)

Abstract: In the quest for novel quantum states driven by topology and correlation, kagome lattice materials have garnered significant interest due to their distinctive electronic band structures, featuring flat bands (FBs) arising from the quantum destructive interference of the electronic wave function. The tuning of the FBs to the chemical potential would lead to the possibility of liberating electronic… ▽ More In the quest for novel quantum states driven by topology and correlation, kagome lattice materials have garnered significant interest due to their distinctive electronic band structures, featuring flat bands (FBs) arising from the quantum destructive interference of the electronic wave function. The tuning of the FBs to the chemical potential would lead to the possibility of liberating electronic instabilities that lead to emergent electronic orders. Despite extensive studies, direct evidence of FBs tuned to the chemical potential and their participation in emergent electronic orders have been lacking in bulk quantum materials. Here using a combination of Angle-Resolved Photoemission Spectroscopy (ARPES) and Density Functional Theory (DFT), we reveal that the low-energy electronic structure of the recently discovered Cr-based kagome metal superconductor CsCr3Sb5 is dominated by a pervasive FB in close proximity to, and below the Fermi level. A comparative analysis with orbital-projected DFT and polarization dependence measurement uncovers that an orbital-selective renormalization mechanism is needed to reconcile the discrepancy with the DFT calculations, which predict the FB to appear 200 meV above the Fermi level. Furthermore, we observe the FB to shift away from the Fermi level by 20 meV in the low-temperature density wave-ordered phase, highlighting the role of the FB in the emergent electronic order. Our results reveal CsCr3Sb5 to stand out as a promising platform for further exploration into the effects of FBs near the Fermi level on kagome lattices, and their role in emergent orders in bulk quantum materials. △ Less

Submitted 12 June, 2024; v1 submitted 7 June, 2024; originally announced June 2024.

Imaging thermally fluctuating Nèel vectors in van der Waals antiferromagnet NiPS3

Authors: Youjin Lee, Chaebin Kim, Suhan Son, Jingyuan Cui, Giung Park, Kai-Xuan Zhang, Siwon Oh, Hyeonsik Cheong, Armin Kleibert, Je-Geun Park

Abstract: Studying antiferromagnetic domains is essential for fundamental physics and potential spintronics applications. Despite its importance, few systematic studies have been performed on van der Waals (vdW) antiferromagnets (AFMs) domains with high spatial resolutions, and direct probing of the Nèel vectors remains challenging. In this work, we found a multidomain in vdW AFM NiPS3, a material extensive… ▽ More Studying antiferromagnetic domains is essential for fundamental physics and potential spintronics applications. Despite its importance, few systematic studies have been performed on van der Waals (vdW) antiferromagnets (AFMs) domains with high spatial resolutions, and direct probing of the Nèel vectors remains challenging. In this work, we found a multidomain in vdW AFM NiPS3, a material extensively investigated for its exotic magnetic exciton. We employed photoemission electron microscopy combined with the X-ray magnetic linear dichroism (XMLD-PEEM) to image the NiPS3's magnetic structure. The nanometer-spatial resolution of XMLD-PEEM allows us to determine local Nèel vector orientations and discover thermally fluctuating Néel vectors that are independent of the crystal symmetry even at 65 K, well below TN of 155 K. We demonstrate a Ni ions' small in-plane orbital moment anisotropy is responsible for the weak magneto-crystalline anisotropy. The observed multidomain's thermal fluctuations may explain the broadening of magnetic exciton peaks at higher temperatures. △ Less

Submitted 3 May, 2024; originally announced May 2024.

Tunability of charge density wave in a magnetic kagome metal

Authors: Ji Seop Oh, Ananya Biswas, Mason Klemm, Hengxin Tan, Makoto Hashimoto, Donghui Lu, Binghai Yan, Pengcheng Dai, Robert J. Birgeneau, Ming Yi

Abstract: The discovery of the charge density wave order (CDW) within a magnetically ordered phase in the kagome lattice FeGe has provided a promising platform to investigate intertwined degrees of freedom in kagome lattices. Recently, a method based on post-annealing has been suggested to manipulate the CDW order in kagome FeGe towards either long-range or suppressed orders. Here, we provide a comprehensiv… ▽ More The discovery of the charge density wave order (CDW) within a magnetically ordered phase in the kagome lattice FeGe has provided a promising platform to investigate intertwined degrees of freedom in kagome lattices. Recently, a method based on post-annealing has been suggested to manipulate the CDW order in kagome FeGe towards either long-range or suppressed orders. Here, we provide a comprehensive comparison of the experimentally measured electronic structures of FeGe crystals that have undergone different post-annealing procedures and demonstrate the remarkable effectiveness on tuning the CDW gap without strong perturbation on the underlying electronic structure. Moreover, we observe an additional low temperature transition that only appears in crystals with a long-range CDW order, which we associate with a lattice-spin coupled order. Our work indicates a likely strong sensitivity of the CDW order to disorder in FeGe, and provides evidence for strong coupling between the electronic, lattice, and spin degrees of freedom in this kagome magnet. △ Less

Submitted 2 April, 2024; originally announced April 2024.

Tailoring Physical Properties of Crystals through Synthetic Temperature Control: A Case Study for new Polymorphic NbFeTe2 phases

Authors: Hanlin Wu, Sheng Li, Yan Lyu, Yucheng Guo, Wenhao Liu, Ji Seop Oh, Yichen Zhang, Sung-Kwan Mo, Clarina dela Cruz, Robert J. Birgeneau, Keith M. Taddei, Ming Yi, Li Yang, Bing Lv

Abstract: Growth parameters play a significant role in the crystal quality and physical properties of layered materials. Here we present a case study on a van der Waals magnetic NbFeTe2 material. Two different types of polymorphic NbFeTe2 phases, synthesized at different temperatures, display significantly different behaviors in crystal symmetry, electronic structure, electrical transport, and magnetism. Wh… ▽ More Growth parameters play a significant role in the crystal quality and physical properties of layered materials. Here we present a case study on a van der Waals magnetic NbFeTe2 material. Two different types of polymorphic NbFeTe2 phases, synthesized at different temperatures, display significantly different behaviors in crystal symmetry, electronic structure, electrical transport, and magnetism. While the phase synthesized at low temperature showing behavior consistent with previous reports, the new phase synthesized at high temperature, has completely different physical properties, such as metallic resistivity, long-range ferromagnetic order, anomalous Hall effect, negative magnetoresistance, and distinct electronic structures. Neutron diffraction reveals out-of-plane ferromagnetism below 70K, consistent with the electrical transport and magnetic susceptibility studies. Our work suggests that simply tuning synthetic parameters in a controlled manner could be an effective route to alter the physical properties of existing materials potentially unlocking new states of matter, or even discovering new materials. △ Less

Submitted 20 March, 2024; originally announced March 2024.

Comments: 22 Pages, 6 figures

Electronic structure of above-room-temperature van der Waals ferromagnet Fe$_3$GaTe$_2$

Authors: Ji-Eun Lee, Shaohua Yan, Sehoon Oh, Jinwoong Hwang, Jonathan D. Denlinger, Choongyu Hwang, Hechang Lei, Sung-Kwan Mo, Se Young Park, Hyejin Ryu

Abstract: Fe$_3$GaTe$_2$, a recently discovered van der Waals ferromagnet, demonstrates intrinsic ferromagnetism above room temperature, necessitating a comprehensive investigation of the microscopic origins of its high Curie temperature ($\textit{T}$$_C$). In this study, we reveal the electronic structure of Fe$_3$GaTe$_2$ in its ferromagnetic ground state using angle-resolved photoemission spectroscopy an… ▽ More Fe$_3$GaTe$_2$, a recently discovered van der Waals ferromagnet, demonstrates intrinsic ferromagnetism above room temperature, necessitating a comprehensive investigation of the microscopic origins of its high Curie temperature ($\textit{T}$$_C$). In this study, we reveal the electronic structure of Fe$_3$GaTe$_2$ in its ferromagnetic ground state using angle-resolved photoemission spectroscopy and density functional theory calculations. Our results establish a consistent correspondence between the measured band structure and theoretical calculations, underscoring the significant contributions of the Heisenberg exchange interaction ($\textit{J}$$_{ex}$) and magnetic anisotropy energy to the development of the high-$\textit{T}$$_C$ ferromagnetic ordering in Fe$_3$GaTe$_2$. Intriguingly, we observe substantial modifications to these crucial driving factors through doping, which we attribute to alterations in multiple spin-splitting bands near the Fermi level. These findings provide valuable insights into the underlying electronic structure and its correlation with the emergence of high-$\textit{T}$$_C$ ferromagnetic ordering in Fe$_3$GaTe$_2$. △ Less

Submitted 14 March, 2024; originally announced March 2024.

Comments: 25 pages, 4 figures

Journal ref: Nano Lett. 23 (2023) 11526-11532

Asymmetrical temporal dynamics of edge modes in Su-Schrieffer-Heeger lattice with Kerr nonlinearity

Authors: Ghada Alharbi, Stephan Wong, Yongkang Gong, Sang Soon Oh

Abstract: Optical bistability and oscillating phases exist in a Sagnac interferometer and a single ring resonator made of $χ^{(3)}$ nonlinear medium where the refractive indices are modulated by the light intensity due to the Kerr nonlinearity. An array of coupled nonlinear ring resonators behave similarly but with more complexity due to the presence of the additional couplings. Here, we theoretically demon… ▽ More Optical bistability and oscillating phases exist in a Sagnac interferometer and a single ring resonator made of $χ^{(3)}$ nonlinear medium where the refractive indices are modulated by the light intensity due to the Kerr nonlinearity. An array of coupled nonlinear ring resonators behave similarly but with more complexity due to the presence of the additional couplings. Here, we theoretically demonstrate the bifurcation of edge modes which leads to optical bistability in the Su-Schrieffer-Heeger lattice with the Kerr nonlinearity. Additionally, we demonstrate periodic and chaotic switching behaviors in an oscillating phase resulting from the coupling between the edge mode and bulk modes with different chiralities, i.e., clockwise and counter-clockwise circulations. △ Less

Submitted 1 August, 2024; v1 submitted 1 March, 2024; originally announced March 2024.

Comments: 10 pages, 7 figures

Buffer-layer-controlled Nickeline vs Zinc-Blende/Wurtzite-type MnTe growths on c-plane Al2O3 substrates

Authors: Deepti Jain, Hee Taek Yi, Alessandro R. Mazza, Kim Kisslinger, Myung-Geun Han, Matthew Brahlek, Seongshik Oh

Abstract: In the recent past, MnTe has proven to be a crucial component of the intrinsic magnetic topological insulator (IMTI) family [MnTe]m[Bi2Te3]n, which hosts a wide range of magneto-topological properties depending on the choice of m and n. However, bulk crystal growth allows only a few combinations of m and n for these IMTIs due to the strict limitations of the thermodynamic growth conditions. One wa… ▽ More In the recent past, MnTe has proven to be a crucial component of the intrinsic magnetic topological insulator (IMTI) family [MnTe]m[Bi2Te3]n, which hosts a wide range of magneto-topological properties depending on the choice of m and n. However, bulk crystal growth allows only a few combinations of m and n for these IMTIs due to the strict limitations of the thermodynamic growth conditions. One way to overcome this challenge is to utilize atomic layer-by-layer molecular beam epitaxy (MBE) technique, which allows arbitrary sequences of [MnTe]m and [Bi2Te3]n to be formed beyond the thermodynamic limit. For such MBE growth, finding optimal growth templates and conditions for the parent building block, MnTe, is a key requirement. Here, we report that two different hexagonal phases of MnTe-nickeline (NC) and zinc-blende/wurtzite (ZB-WZ) structures, with distinct in-plane lattice constants of 4.20 +/- 0.04 A and 4.39 +/- 0.04 A, respectively-can be selectively grown on c-plane Al2O3 substrates using different buffer layers and growth temperatures. Moreover, we provide the first comparative studies of different MnTe phases using atomic-resolution scanning transmission electron microscopy and show that ZB and WZ-like stacking sequences can easily alternate between the two. Surprisingly, In2Se3 buffer layer, despite its lattice constant (4.02 A) being closer to that of the NC phase, fosters the ZB-WZ instead, whereas Bi2Te3, sharing the same lattice constant (4.39 A) with the ZB-WZ phase, fosters the NC phase. These discoveries suggest that lattice matching is not always the most critical factor determining the preferred phase during epitaxial growth. Overall, this will deepen our understanding of epitaxial growth modes for chalcogenide materials and accelerate progress toward new IMTI phases as well as other magneto-topological applications. △ Less

Submitted 25 January, 2024; originally announced January 2024.

Electrodynamics of the quantum anomalous Hall state in a magnetically doped topological insulator

Authors: Zhenisbek Tagay, Hee Taek Yi, Deepti Jain, Seongshik Oh, N. P. Armitage

Abstract: Magnetically doped topological insulators have been extensively studied over the past decade as a material platform to exhibit quantum anomalous Hall effect. Most material realizations are magnetically doped and despite material advances suffer from large disorder effects. In such systems, it is believed that magnetic disorder leads to a spatially varying Dirac mass gap and chemical potential fluc… ▽ More Magnetically doped topological insulators have been extensively studied over the past decade as a material platform to exhibit quantum anomalous Hall effect. Most material realizations are magnetically doped and despite material advances suffer from large disorder effects. In such systems, it is believed that magnetic disorder leads to a spatially varying Dirac mass gap and chemical potential fluctuations, and hence quantized conductance is only observed at very low temperatures. Here, we use a recently developed high-precision time-domain terahertz (THz) polarimeter to study the low-energy electrodynamic response of Cr-doped (Bi,Sb)$_2$Te$_3$ thin films. These films have been recently shown to exhibit a dc quantized anomalous Hall response up to T = 2 K at zero gate voltage. We show that the real part of the THz range Hall conductance $σ_{xy}(ω)$ is slightly smaller than $e^2/h$ down to T = 2 K with an unconventional decreasing dependence on frequency. The imaginary (dissipative) part of $σ_{xy}(ω)$ is small, but increasing as a function of omega. We connect both aspects of our data to a simple model for effective magnetic gap disorder. Our work highlights the different effect that disorder can have on the dc vs. ac quantum anomalous Hall effect. △ Less

Submitted 13 January, 2024; originally announced January 2024.

Comments: 6 pages, 4 figures

Two-Step Electronic Response to Magnetic Ordering in a van der Waals Ferromagnet

Authors: Han Wu, Jian-Xin Zhu, Lebing Chen, Matthew W Butcher, Ziqin Yue, Dongsheng Yuan, Yu He, Ji Seop Oh, Jianwei Huang, Shan Wu, Cheng Gong, Yucheng Guo, Sung-Kwan Mo, Jonathan D. Denlinger, Donghui Lu, Makoto Hashimoto, Matthew B. Stone, Alexander I. Kolesnikov, Songxue Chi, Junichiro Kono, Andriy H. Nevidomskyy, Robert J. Birgeneau, Pengcheng Dai, Ming Yi

Abstract: The two-dimensional (2D) material Cr$_2$Ge$_2$Te$_6$ is a member of the class of insulating van der Waals magnets. Here, using high resolution angle-resolved photoemission spectroscopy in a detailed temperature dependence study, we identify a clear response of the electronic structure to a dimensional crossover in the form of two distinct temperature scales marking onsets of modifications in the e… ▽ More The two-dimensional (2D) material Cr$_2$Ge$_2$Te$_6$ is a member of the class of insulating van der Waals magnets. Here, using high resolution angle-resolved photoemission spectroscopy in a detailed temperature dependence study, we identify a clear response of the electronic structure to a dimensional crossover in the form of two distinct temperature scales marking onsets of modifications in the electronic structure. Specifically, we observe Te $p$-orbital-dominated bands to undergo changes at the Curie transition temperature T$_C$ while the Cr $d$-orbital-dominated bands begin evolving at a higher temperature scale. Combined with neutron scattering, density functional theory calculations, and Monte Carlo simulations, we find that the electronic system can be consistently understood to respond sequentially to the distinct temperatures at which in-plane and out-of-plane spin correlations exceed a characteristic length scale. Our findings reveal the sensitivity of the orbital-selective electronic structure for probing the dynamical evolution of local moment correlations in vdW insulating magnets. △ Less

Submitted 20 December, 2023; v1 submitted 18 December, 2023; originally announced December 2023.

Comments: PRB, in press

Journal ref: Physical Review B 109, 045416 (2024)

Magneto-optical effects of an artificially-layered ferromagnetic topological insulator with T$_C$ of 160 K

Authors: Xingyue Han, Hee Taek Yi, Seongshik Oh, Liang Wu

Abstract: Magnetic topological insulator is a fertile platform to study the interplay between magnetism and topology. The unique electronic band structure can induce exotic transport and optical properties. However, a comprehensive optical study in both near-infrared frequency and terahertz frequency has been lacking. Here, we report magneto-optical effects from a heterostructure of Cr-incorporated topologi… ▽ More Magnetic topological insulator is a fertile platform to study the interplay between magnetism and topology. The unique electronic band structure can induce exotic transport and optical properties. However, a comprehensive optical study in both near-infrared frequency and terahertz frequency has been lacking. Here, we report magneto-optical effects from a heterostructure of Cr-incorporated topological insulator, CBST. We use 800 nm magneto-optical Kerr effect to reveal a ferromagnetic order in the CBST film with a high transition temperature at 160 K. We also use time-domain terahertz polarimetry to reveal a terahertz Faraday rotation of 1.5 mrad and Kerr rotation of 5.1 mrad at 2 K. The calculated terahertz Hall conductance is 0.42 $e^2/h$. Our work shows the optical responses of an artificially layered magnetic topological insulator, paving the way towards high-temperature quantum anomalous Hall effect via heterostructure engineering. △ Less

Submitted 3 September, 2024; v1 submitted 14 December, 2023; originally announced December 2023.

Comments: 6 pages, 4 figures

A continuous-wave and pulsed X-band electron spin resonance spectrometer operating in ultra-high vacuum for the study of low dimensional spin ensembles

Authors: Franklin H. Cho, Juyoung Park, Soyoung Oh, Jisoo Yu, Yejin Jeong, Luciano Colazzo, Lukas Spree, Caroline Hommel, Arzhang Ardavan, Giovanni Boero, Fabio Donati

Abstract: We report the development of a continuous-wave and pulsed X-band electron spin resonance (ESR) spectrometer for the study of spins on ordered surfaces down to cryogenic temperatures. The spectrometer operates in ultra-high vacuum and utilizes a half-wavelength microstrip line resonator realized using epitaxially grown copper films on single crystal Al$_2$O$_3$ substrates. The one-dimensional micro… ▽ More We report the development of a continuous-wave and pulsed X-band electron spin resonance (ESR) spectrometer for the study of spins on ordered surfaces down to cryogenic temperatures. The spectrometer operates in ultra-high vacuum and utilizes a half-wavelength microstrip line resonator realized using epitaxially grown copper films on single crystal Al$_2$O$_3$ substrates. The one-dimensional microstrip line resonator exhibits a quality factor of more than 200 at room temperature, close to the upper limit determined by radiation losses. The surface characterizations of the copper strip of the resonator by atomic force microscope, low-energy electron diffraction, and scanning tunneling microscope show that the surface is atomically clean, flat, and single crystalline. Measuring the ESR spectrum at 15 K from a few nm thick molecular film of YPc$_2$, we find a continuous-wave ESR sensitivity of $2.6 \cdot 10^{11}~\text{spins}/\text{G} \cdot \text{Hz}^{1/2}$ indicating that a signal-to-noise ratio of $3.9~\text{G} \cdot \text{Hz}^{1/2}$ is expected from a monolayer of YPc$_2$ molecules. Advanced pulsed ESR experimental capabilities including dynamical decoupling and electron-nuclear double resonance are demonstrated using free radicals diluted in a glassy matrix. △ Less

Submitted 20 February, 2024; v1 submitted 1 December, 2023; originally announced December 2023.

Comments: 14 pages, 7 figures

Signatures of Majorana Bound States in the Diffraction Patterns of Extended Superconductor-Topological Insulator-Superconductor Josephson Junctions

Authors: Guang Yue, Can Zhang, Erik D. Huemiller, Jessica H. Montone, Gilbert R. Arias, Drew G. Wild, Jered Y. Zhang, David R. Hamilton, Xiaoyu Yuan, Xiong Yao, Deepti Jain, Jisoo Moon, Maryam Salehi, Nikesh Koirala, Seongshik Oh, Dale J. Van Harlingen

Abstract: In an extended superconductor-topological insulator-superconductor (S-TI-S) Josephson junction in a magnetic field, localized Majorana bound states (MBS) are predicted to exist at the cores of Josephson vortices where the local phase difference across the junction is an odd-multiple of $π$. These states contribute a supercurrent with a $4π$-periodic current-phase relation (CPR) that adds to the co… ▽ More In an extended superconductor-topological insulator-superconductor (S-TI-S) Josephson junction in a magnetic field, localized Majorana bound states (MBS) are predicted to exist at the cores of Josephson vortices where the local phase difference across the junction is an odd-multiple of $π$. These states contribute a supercurrent with a $4π$-periodic current-phase relation (CPR) that adds to the conventional $2π$-periodic sinusoidal CPR. In this work, we present a comprehensive experimental study of the critical current vs. applied magnetic field diffraction patterns of lateral Nb-Bi$_2$Se$_3$-Nb Josephson junctions. We compare our observations to a model of the Josephson dynamics in the S-TI-S junction system to explore what feature of MBS are, or are not, exhibited in these junctions. Consistent with the model, we find several distinct deviations from a Fraunhofer diffraction pattern that is expected for a uniform sin$(φ)$ CPR. In particular, we observe abrupt changes in the diffraction pattern at applied magnetic fields in which the current-carrying localized MBS are expected to enter the junction, and a lifting of the odd-numbered nodes consistent with a $4π$-periodic sin$(φ/2)$-component in the CPR. We also see that although the even-numbered nodes often remain fully-formed, we sometimes see deviations that are consistent with quasiparticle-induced fluctuations in the parity of the MBS pairs that encodes quantum information. △ Less

Submitted 21 February, 2024; v1 submitted 27 November, 2023; originally announced November 2023.

Journal ref: PHYS. REV. B 109, 094511 (2024)

Thermal Hall effects due to topological spin fluctuations in YMnO$_3$

Authors: Ha-Leem Kim, Takuma Saito, Heejun Yang, Hiroaki Ishizuka, Matthew John Coak, Jun Han Lee, Hasung Sim, Yoon Seok Oh, Naoto Nagaosa, Je-Geun Park

Abstract: The thermal Hall effect in magnetic insulators has been considered a powerful method for examining the topological nature of charge-neutral quasiparticles such as magnons. Yet, unlike the kagome system, the triangular lattice has received less attention for studying the thermal Hall effect because the scalar spin chirality cancels out between adjacent triangles. However, such cancellation cannot b… ▽ More The thermal Hall effect in magnetic insulators has been considered a powerful method for examining the topological nature of charge-neutral quasiparticles such as magnons. Yet, unlike the kagome system, the triangular lattice has received less attention for studying the thermal Hall effect because the scalar spin chirality cancels out between adjacent triangles. However, such cancellation cannot be perfect if the triangular lattice is distorted, which could open the possibility of a non-zero thermal Hall effect. Here, we report that the trimerized triangular lattice of multiferroic hexagonal manganite YMnO$_3$ produces a highly unusual thermal Hall effect due to topological spin fluctuations with the additional intricacy of a Dzyaloshinskii-Moriya interaction under an applied magnetic field. We conclude the thermal Hall conductivity arises from the system's topological nature of spin fluctuations. Our theoretical calculations demonstrate that the thermal Hall conductivity is also related in this material to the splitting of the otherwise degenerate two chiralities, left and right, of its 120$^{\circ}$ magnetic structure. Our result is one of the most unusual cases of topological physics due to this broken $Z_2$ symmetry of the chirality in the supposedly paramagnetic state of YMnO$_3$, with strong topological spin fluctuations. These new mechanisms in this important class of materials are crucial in exploring new thermal Hall physics and exotic excitations. △ Less

Submitted 19 November, 2023; originally announced November 2023.

Comments: 14 pages, 3 figures; accepted for publication in Nature Communications

Multi-level, Forming Free, Bulk Switching Trilayer RRAM for Neuromorphic Computing at the Edge

Authors: Jaeseoung Park, Ashwani Kumar, Yucheng Zhou, Sangheon Oh, Jeong-Hoon Kim, Yuhan Shi, Soumil Jain, Gopabandhu Hota, Amelie L. Nagle, Catherine D. Schuman, Gert Cauwenberghs, Duygu Kuzum

Abstract: Resistive memory-based reconfigurable systems constructed by CMOS-RRAM integration hold great promise for low energy and high throughput neuromorphic computing. However, most RRAM technologies relying on filamentary switching suffer from variations and noise leading to computational accuracy loss, increased energy consumption, and overhead by expensive program and verify schemes. Low ON-state resi… ▽ More Resistive memory-based reconfigurable systems constructed by CMOS-RRAM integration hold great promise for low energy and high throughput neuromorphic computing. However, most RRAM technologies relying on filamentary switching suffer from variations and noise leading to computational accuracy loss, increased energy consumption, and overhead by expensive program and verify schemes. Low ON-state resistance of filamentary RRAM devices further increases the energy consumption due to high-current read and write operations, and limits the array size and parallel multiply & accumulate operations. High-forming voltages needed for filamentary RRAM are not compatible with advanced CMOS technology nodes. To address all these challenges, we developed a forming-free and bulk switching RRAM technology based on a trilayer metal-oxide stack. We systematically engineered a trilayer metal-oxide RRAM stack and investigated the switching characteristics of RRAM devices with varying thicknesses and oxygen vacancy distributions across the trilayer to achieve reliable bulk switching without any filament formation. We demonstrated bulk switching operation at megaohm regime with high current nonlinearity and programmed up to 100 levels without compliance current. We developed a neuromorphic compute-in-memory platform based on trilayer bulk RRAM crossbars by combining energy-efficient switched-capacitor voltage sensing circuits with differential encoding of weights to experimentally demonstrate high-accuracy matrix-vector multiplication. We showcased the computational capability of bulk RRAM crossbars by implementing a spiking neural network model for an autonomous navigation/racing task. Our work addresses challenges posed by existing RRAM technologies and paves the way for neuromorphic computing at the edge under strict size, weight, and power constraints. △ Less

Submitted 20 October, 2023; originally announced October 2023.

Coupled metamaterial-phonon terahertz range polaritons in a topological insulator

Authors: Sirak M. Mekonen, Deepti Jain, Seongshik Oh, N. P. Armitage

Abstract: We report terahertz time-domain spectroscopy (TDTS) experiments demonstrating strong light-matter coupling in a terahertz (THz) LC-metamaterial in which the phonon resonance of a topological insulator (TI) thin film is coupled to the photonic modes of an array of electronic split-ring resonators. As we tune the metamaterial resonance frequency through the frequency of the low frequency $α$ mode of… ▽ More We report terahertz time-domain spectroscopy (TDTS) experiments demonstrating strong light-matter coupling in a terahertz (THz) LC-metamaterial in which the phonon resonance of a topological insulator (TI) thin film is coupled to the photonic modes of an array of electronic split-ring resonators. As we tune the metamaterial resonance frequency through the frequency of the low frequency $α$ mode of (Bi$_x$Sb$_{1-x}$)$_2$Te$_3$ (BST), we observe strong mixing and level repulsion between phonon and metamaterial resonance. This hybrid resonance is a phonon polariton. We observe a normalized coupling strength, $η$ = $Ω_R$/$ω_c$ $\approx$ 0.09, using the measured vacuum Rabi frequency and cavity resonance. Our results demonstrate that one can tune the mechanical properties of materials by changing their electromagnetic environment and therefore modify their magnetic and topological degrees of freedom via coupling to the lattice in this fashion. △ Less

Submitted 19 May, 2024; v1 submitted 13 October, 2023; originally announced October 2023.

Electronic-grade epitaxial (111) KTaO3 heterostructures

Authors: Jieun Kim, Muqing Yu, Jung-Woo Lee, Shun-Li Shang, Gi-Yeop Kim, Pratap Pal, Jinsol Seo, Neil Campbell, Kitae Eom, Ranjani Ramachandran, Mark S. Rzchowski, Sang Ho Oh, Si-Young Choi, Zi-Kui Liu, Jeremy Levy, Chang-Beom Eom

Abstract: KTaO3 has recently attracted attention as a model system to study the interplay of quantum paraelectricity, spin-orbit coupling, and superconductivity. However, the high and low vapor pressures of potassium and tantalum present processing challenges to creating interfaces clean enough to reveal the intrinsic quantum properties. Here, we report superconducting heterostructures based on electronic-g… ▽ More KTaO3 has recently attracted attention as a model system to study the interplay of quantum paraelectricity, spin-orbit coupling, and superconductivity. However, the high and low vapor pressures of potassium and tantalum present processing challenges to creating interfaces clean enough to reveal the intrinsic quantum properties. Here, we report superconducting heterostructures based on electronic-grade epitaxial (111) KTaO3 thin films. Electrical and structural characterizations reveal that two-dimensional electron gas at the heterointerface between amorphous LaAlO3 and KTaO3 thin film exhibits significantly higher electron mobility, superconducting transition temperature and critical current density than those in bulk single crystal KTaO3-based heterostructures owing to cleaner interface in KTaO3 thin films. Our hybrid approach may enable epitaxial growth of other alkali metal-based oxides that lie beyond the capabilities of conventional methods. △ Less

Submitted 25 August, 2023; originally announced August 2023.

Emergent magnetism with continuous control in the ultrahigh conductivity layered oxide PdCoO2

Authors: Matthew Brahlek, Alessandro R. Mazza, Abdulgani Annaberdiyev, Michael Chilcote, Gaurab Rimal, Gábor B. Halász, Anh Pham, Yun-Yi Pai, Jaron T. Krogel, Jason Lapano, Benjamin J. Lawrie, Gyula Eres, Jessica McChesney, Thomas Prokscha, Andreas Suter, Seongshik Oh, John W. Freeland, Yue Cao, Jason S. Gardner, Zaher Salman, Robert G. Moore, Panchapakesan Ganesh, T. Zac Ward

Abstract: The current challenge to realizing continuously tunable magnetism lies in our inability to systematically change properties such as valence, spin, and orbital degrees of freedom as well as crystallographic geometry. Here, we demonstrate that ferromagnetism can be externally turned on with the application of low-energy helium implantation and subsequently erased and returned to the pristine state v… ▽ More The current challenge to realizing continuously tunable magnetism lies in our inability to systematically change properties such as valence, spin, and orbital degrees of freedom as well as crystallographic geometry. Here, we demonstrate that ferromagnetism can be externally turned on with the application of low-energy helium implantation and subsequently erased and returned to the pristine state via annealing. This high level of continuous control is made possible by targeting magnetic metastability in the ultra-high conductivity, non-magnetic layered oxide PdCoO2 where local lattice distortions generated by helium implantation induce emergence of a net moment on the surrounding transition metal octahedral sites. These highly-localized moments communicate through the itinerant metal states which triggers the onset of percolated long-range ferromagnetism. The ability to continuously tune competing interactions enables tailoring precise magnetic and magnetotransport responses in an ultra-high conductivity film and will be critical to applications across spintronics. △ Less

Submitted 27 August, 2023; v1 submitted 25 July, 2023; originally announced July 2023.

Comments: https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.3c01065

Journal ref: Nano Letters 23, 16, 7279-7287 (2023)

Reversible Non-Volatile Electronic Switching in a Near Room Temperature van der Waals Ferromagnet

Authors: Han Wu, Lei Chen, Paul Malinowski, Jianwei Huang, Qinwen Deng, Kirsty Scott, Bo Gyu Jang, Jacob P. C. Ruff, Yu He, Xiang Chen, Chaowei Hu, Ziqin Yue, Ji Seop Oh, Xiaokun Teng, Yucheng Guo, Mason Klemm, Chuqiao Shi, Yue Shi, Chandan Setty, Tyler Werner, Makoto Hashimoto, Donghui Lu, T. Yilmaz, Elio Vescovo, Sung-Kwan Mo , et al. (15 additional authors not shown)

Abstract: The ability to reversibly toggle between two distinct states in a non-volatile method is important for information storage applications. Such devices have been realized for phase-change materials, which utilizes local heating methods to toggle between a crystalline and an amorphous state with distinct electrical properties. To expand such kind of switching between two topologically distinct phases… ▽ More The ability to reversibly toggle between two distinct states in a non-volatile method is important for information storage applications. Such devices have been realized for phase-change materials, which utilizes local heating methods to toggle between a crystalline and an amorphous state with distinct electrical properties. To expand such kind of switching between two topologically distinct phases requires non-volatile switching between two crystalline phases with distinct symmetries. Here we report the observation of reversible and non-volatile switching between two stable and closely-related crystal structures with remarkably distinct electronic structures in the near room temperature van der Waals ferromagnet Fe$_{5-δ}$GeTe$_2$. From a combination of characterization techniques we show that the switching is enabled by the ordering and disordering of an Fe site vacancy that results in distinct crystalline symmetries of the two phases that can be controlled by a thermal annealing and quenching method. Furthermore, from symmetry analysis as well as first principle calculations, we provide understanding of the key distinction in the observed electronic structures of the two phases: topological nodal lines compatible with the preserved global inversion symmetry in the site-disordered phase, and flat bands resulting from quantum destructive interference on a bipartite crystaline lattice formed by the presence of the site order as well as the lifting of the topological degeneracy due to the broken inversion symmetry in the site-ordered phase. Our work not only reveals a rich variety of quantum phases emergent in the metallic van der Waals ferromagnets due to the presence of site ordering, but also demonstrates the potential of these highly tunable two-dimensional magnets for memory and spintronics applications. △ Less

Submitted 6 July, 2023; originally announced July 2023.

Journal ref: Nat Commun 15, 2739 (2024)

High temperature, gate-free quantum anomalous Hall effect with an active capping layer

Authors: Hee Taek Yi, Deepti Jain, Xiong Yao, Seongshik Oh

Abstract: Quantum anomalous Hall effect (QAHE) was discovered a decade ago, but is still not utilized beyond a handful of research groups, due to numerous limitations such as extremely low temperature, electric field-effect gating requirement, small sample sizes and environmental aging effect. Here, we present a robust platform that provides effective solutions to these problems. Specifically, on this platf… ▽ More Quantum anomalous Hall effect (QAHE) was discovered a decade ago, but is still not utilized beyond a handful of research groups, due to numerous limitations such as extremely low temperature, electric field-effect gating requirement, small sample sizes and environmental aging effect. Here, we present a robust platform that provides effective solutions to these problems. Specifically, on this platform, we observe QAH signatures at record high temperatures, with the Hall conductance of 1.00 e2/h at 2.0 K, 0.98 e2/h at 4.2 K, and 0.92 e2/h at 10 K, on centimeter-scale substrates, without electric-field-effect gating. The key ingredient is an active CrOx capping layer, which substantially boosts the ferromagnetism while suppressing environmental degradation. With this development, QAHE will now be accessible to much broader applications than before. △ Less

Submitted 7 June, 2023; originally announced June 2023.

Comments: 20 pages, 8 figures, Accepted for publication in Nano Letters, https://pubs.acs.org/doi/full/10.1021/acs.nanolett.3c01313

Thickness-dependent, tunable anomalous Hall effect in hydrogen-reduced PdCoO$_2$ thin films

Authors: Gaurab Rimal, Yiting Liu, Matthew Brahlek, Seongshik Oh

Abstract: It was recently reported that hydrogen-reduced PdCoO$_2$ films exhibit strong perpendicular magnetic anisotropy (PMA) with sign tunable anomalous Hall effect (AHE). Here, we provide extensive thickness-dependent study of this system, and show that the electronic and magnetic properties are strongly dependent on the thickness and annealing conditions. Below a critical thickness of 25 nm, AHE shows… ▽ More It was recently reported that hydrogen-reduced PdCoO$_2$ films exhibit strong perpendicular magnetic anisotropy (PMA) with sign tunable anomalous Hall effect (AHE). Here, we provide extensive thickness-dependent study of this system, and show that the electronic and magnetic properties are strongly dependent on the thickness and annealing conditions. Below a critical thickness of 25 nm, AHE shows clear PMA with hysteresis, and its sign changes from positive to negative, and back to positive as the annealing temperature increases from 100 $^\circ$C to 400 $^\circ$C. Beyond the critical thickness, both PMA and AHE hysteresis disappear and the AHE sign remains positive regardless of the annealing parameters. Our results show that PMA may have a large role on AHE sign-tunability and that below the critical thickness, competition between different AHE mechanisms drives this sign change. △ Less

Submitted 2 June, 2023; originally announced June 2023.

Dispersive readout of a silicon quantum device using an atomic force microscope-based rf gate sensor

Authors: Artem O. Denisov, Gordian Fuchs, Seong W. Oh, Jason R. Petta

Abstract: We demonstrate dispersive charge sensing of Si/SiGe single and double quantum dots (DQD) by coupling sub-micron floating gates to a radio frequency reflectometry (rf-reflectometry) circuit using the tip of an atomic force microscope (AFM). Charge stability diagrams are obtained in the phase response of the reflected rf signal. We demonstrate single-electron dot-to-lead and dot-to-dot charge transi… ▽ More We demonstrate dispersive charge sensing of Si/SiGe single and double quantum dots (DQD) by coupling sub-micron floating gates to a radio frequency reflectometry (rf-reflectometry) circuit using the tip of an atomic force microscope (AFM). Charge stability diagrams are obtained in the phase response of the reflected rf signal. We demonstrate single-electron dot-to-lead and dot-to-dot charge transitions with a signal-to-noise ratio (SNR) of 2 and integration time of $τ~=~2.7~\mathrm{ms}$ and $τ~=~6.4~\mathrm{ms}$, respectively. The charge sensing SNR compares favorably with results obtained on conventional devices. Moreover, the small size of the floating gates largely eliminates the coupling to parasitic charge traps that can complicate the interpretation of the dispersive charge sensing data. △ Less

Submitted 9 May, 2023; originally announced May 2023.

Journal ref: Appl. Phys. Lett. 123, 093502 (2023)

Synthesis of Ultra-Thin Superionic Cu2Se and New Aspects of the Low-Temperature Crystal Configurations

Authors: Abdulsalam Aji Suleiman, Amir Parsi, Mohammadali Razeghi, Uğur Başçı, Saeyoung Oh, Doruk Pehlivanoğlu, Hu Young Jeoung, Kibum Kang, T. Serkan Kasırga

Abstract: Superionic conductors offer unique advantages for novel technological devices in various fields, such as energy storage and neuromorphic computing. Above 414 K, Cu2Se turns into a well-known superionic conductor via a phase transition, and it is demonstrated to exhibit peculiar electrical and thermoelectric properties in bulk. Here, we report a large-area synthesis of ultra-thin single crystalline… ▽ More Superionic conductors offer unique advantages for novel technological devices in various fields, such as energy storage and neuromorphic computing. Above 414 K, Cu2Se turns into a well-known superionic conductor via a phase transition, and it is demonstrated to exhibit peculiar electrical and thermoelectric properties in bulk. Here, we report a large-area synthesis of ultra-thin single crystalline Cu2Se using the chemical vapor deposition method. We demonstrate that Cu2Se crystals exhibit optically and electrically controllable robust phase reconfiguration below 414 K. Moreover, our results show that the mobility of the liquid-like Cu ion vacancies in Cu2Se causes macroscopic fluctuations in the Cu ordering. Consequently, phase variations are not dictated by the diffusive motion of the ions but by the local energy minima formed due to the interplay between the extrinsic and the intrinsic material parameters. As a result, long-range ordering of the crystal below 414 K is optically observable at a micrometer scale. Our results show that Cu2Se could find applications beyond thermoelectric such as smart optical coatings, optoelectronic switching, and ionic transistors. △ Less

Submitted 29 April, 2023; originally announced May 2023.

Four-channel System for Characterization of Josephson Parametric Amplifiers

Authors: Boris I. Ivanov, Jinmyeong Kim, Çağlar Kutlu, Arjan F. van Loo, Yasunobu Nakamura, Sergey V. Uchaikin, Seonjeong Oh, Violeta Gkika, Andrei Matlashov, Woohyun Chung, Yannis K. Semertzidis

Abstract: The axion search experiments based on haloscopes at the Center for Axion and Precision Physics Research (CAPP) of the Institute for Basic Science (IBS) in South Korea are performed in the frequency range from 1 GHz to 6 GHz. In order to perform the experiments in a strong magnetic field of 12 T and a large-volume cavity of close to 40 liters, we use He wet dilution refrigerators with immersed supe… ▽ More The axion search experiments based on haloscopes at the Center for Axion and Precision Physics Research (CAPP) of the Institute for Basic Science (IBS) in South Korea are performed in the frequency range from 1 GHz to 6 GHz. In order to perform the experiments in a strong magnetic field of 12 T and a large-volume cavity of close to 40 liters, we use He wet dilution refrigerators with immersed superconducting magnets. The measurements require continuous operation for months without interruptions for microwave component replacements. This is achieved by using different cryogenic engineering approaches including microwave RF-switching. The critical components, defining the scanning rate and the sensitivity of the setup, are the Josephson parametric amplifiers (JPA) and cryogenic low noise amplifiers (cLNA) based on high-electron-mobility-transistor (HEMT) technology. It is desirable for both devices to have a wide frequency range and low noise close to the quantum limit for the JPA. In this paper, we show a recent design of a 4-channel measurement setup for JPA and HEMT measurements. The setup is based on a 4-channel wideband noise source (NS) and is used for both JPA and HEMT gain and noise measurements. The setup is placed at 20 mK inside the dry dilution refrigerator. The NS is thermally decoupled from the environment using plastic spacers, superconducting wires and superconducting coaxial cables. We show the gain and noise temperature curves measured for 4 HEMT amplifiers and 2 JPAs in one cool-down △ Less

Submitted 9 May, 2023; v1 submitted 26 April, 2023; originally announced April 2023.

Comments: to be published in JPS Conference Proceedings (LT29)

Observation of Flat Bands and Dirac Cones in a Pyrochlore Lattice Superconductor

Authors: Jianwei Huang, Chandan Setty, Liangzi Deng, Jing-Yang You, Hongxiong Liu, Sen Shao, Ji Seop Oh, Yucheng Guo, Yichen Zhang, Ziqin Yue, Jia-Xin Yin, Makoto Hashimoto, Donghui Lu, Sergey Gorovikov, Pengcheng Dai, Jonathan D. Denlinger, M. Zahid Hasan, Yuan-Ping Feng, Robert J. Birgeneau, Youguo Shi, Ching-Wu Chu, Guoqing Chang, Qimiao Si, Ming Yi

Abstract: Emergent phases often appear when the electronic kinetic energy is comparable to the Coulomb interactions. One approach to seek material systems as hosts of such emergent phases is to realize localization of electronic wavefunctions due to the geometric frustration inherent in the crystal structure, resulting in flat electronic bands. Recently, such efforts have found a wide range of exotic phases… ▽ More Emergent phases often appear when the electronic kinetic energy is comparable to the Coulomb interactions. One approach to seek material systems as hosts of such emergent phases is to realize localization of electronic wavefunctions due to the geometric frustration inherent in the crystal structure, resulting in flat electronic bands. Recently, such efforts have found a wide range of exotic phases in the two-dimensional kagome lattice, including magnetic order, time-reversal symmetry breaking charge order, nematicity, and superconductivity. However, the interlayer coupling of the kagome layers disrupts the destructive interference needed to completely quench the kinetic energy. Here we demonstrate that an interwoven kagome network-a pyrochlore lattice-can host a three dimensional (3D) localization of electron wavefunctions. Meanwhile, the nonsymmorphic symmetry of the pyrochlore lattice guarantees all band crossings at the Brillouin zone X point to be 3D gapless Dirac points, which was predicted theoretically but never yet observed experimentally. Through a combination of angle-resolved photoemission spectroscopy, fundamental lattice model and density functional theory calculations, we investigate the novel electronic structure of a Laves phase superconductor with a pyrochlore sublattice, CeRu$_2$. We observe flat bands originating from both the Ce 4$f$ orbitals as well as from the 3D destructive interference of the Ru 4$d$ orbitals. We further observe the nonsymmorphic symmetry-protected 3D gapless Dirac cones at the X point. Our work establishes the pyrochlore structure as a promising lattice platform to realize and tune novel emergent phases intertwining topology and many-body interactions. △ Less

Submitted 14 December, 2023; v1 submitted 18 April, 2023; originally announced April 2023.

Comments: 27 pages, 4 figures

Journal ref: npj Quantum Materials 9, 71 (2024)

CAPP Axion Search Experiments with Quantum Noise Limited Amplifiers

Authors: Sergey V. Uchaikin, Boris I. Ivanov, Jinmyeong Kim, Çağlar Kutlu, Arjan F. Van Loo, Yasunobu Nakamura, Seonjeong OH, Violeta Gkika, Andrei Matlashov, Woohyun Chung, Yannis K. Semertzidis

Abstract: The axion is expected to solve the strong CP problem of quantum chromodynamics and is one of the leading candidates for dark matter. CAPP in South Korea has several axion search experiments based on cavity haloscopes in the frequency range of 1-6 GHz. The main effort focuses on operation of the experiments with the highest possible sensitivity. It requires maintenance of the haloscopes at the lowe… ▽ More The axion is expected to solve the strong CP problem of quantum chromodynamics and is one of the leading candidates for dark matter. CAPP in South Korea has several axion search experiments based on cavity haloscopes in the frequency range of 1-6 GHz. The main effort focuses on operation of the experiments with the highest possible sensitivity. It requires maintenance of the haloscopes at the lowest physical temperature in the range of mK and usage of low noise components to amplify the weak axion signal. We report development and operation of low noise amplifiers for 5 haloscope experiments targeting at different frequency ranges. The amplifiers show noise temperatures approaching the quantum limit. △ Less

Submitted 24 April, 2023; v1 submitted 13 April, 2023; originally announced April 2023.

Comments: 6 pages, 7 figures, 29th International Conference on Low Temperature Physics, August 18-24, 2022, Sapporo, Japan