-
Inkwell: Design and Validation of a Low-Cost Open Electricity-Free 3D Printed Device for Automated Thin Smearing of Whole Blood
Authors:
Jerome Nowak,
Anesta Kothari,
Hongquan Li,
Jaspreet Pannu,
Dani Algazi,
Manu Prakash
Abstract:
Microscopy plays a crucial role in hematology and diagnosis of infectious diseases worldwide. For malaria alone, more than 200 million slides are read by manual microscopists every year. High quality thin blood smears are essential for subsequent microscopy examinations including malaria microscopy, but are hard to make in field settings. Existing devices for assisting in making thin smears are av…
▽ More
Microscopy plays a crucial role in hematology and diagnosis of infectious diseases worldwide. For malaria alone, more than 200 million slides are read by manual microscopists every year. High quality thin blood smears are essential for subsequent microscopy examinations including malaria microscopy, but are hard to make in field settings. Existing devices for assisting in making thin smears are available but are limited by cost or complexity for wider use. Here we present Inkwell, a portable mechanical device capable of making high quality thin blood smears in field settings. Inkwell is simple, low-cost, does not use electricity, and requires minimal training prior to use. By utilizing passive dissipative dynamics of a spiral spring coupled to an air dashpot with a tunable valve - we demonstrate a highly tunable mechanism for constant velocity smears at prescribed angle. Inkwell is capable of producing high quality blood smears of tunable cell density with more than 12 million individually distinguishable red blood cells on a single slide. The current design, which exploits precision manufacturing of a 17 cents plastic syringe and a spring, can be printed on a standard 3D printer with overall unit cost of less than a few dollars in large quantities. We further present usability tests to confirm performance over 10,000 unit cycle operations with no degradation in quality of the smear and demonstrate ease of use with minimal training. Inkwell enhances the broader toolbox of open innovations in diagnostics for providing high quality medical care in low and medium resource settings. Combined with rise of 3D printing, Inkwell presents an alternative to traditional centralized manufacturing and opens up distributed manufacturing of medical diagnostics in global context.
△ Less
Submitted 20 April, 2023;
originally announced April 2023.
-
Metallurgical synthesis methods for Mg-Al-Ca scientific model materials
Authors:
W. Luo,
L. Tanure,
M. Felten,
J. Nowak,
W. Delis,
M. Freund,
N. Ayeb,
D. Zander,
C. Thomas,
M. Feuerbacher,
S. Sandlöbes-Haut,
S. Korte-Kerzel,
H. Springer
Abstract:
Mg-based alloys are industrially used for structural applications, both as solid solutions alloys and as composites containing intermetallic compounds. However, a further development in terms of mechanical properties requires the investigation of underlying causalities between synthesis, processing and microstructure to adjust the mechanical and the corrosion properties, ideally down to the near a…
▽ More
Mg-based alloys are industrially used for structural applications, both as solid solutions alloys and as composites containing intermetallic compounds. However, a further development in terms of mechanical properties requires the investigation of underlying causalities between synthesis, processing and microstructure to adjust the mechanical and the corrosion properties, ideally down to the near atomic scale. Such fundamental scientific investigations with high resolution characterisation techniques require model materials of exceptionally high purity and strictly controlled microstructure e.g. with respect to grain size, morphology, chemical homogeneity as well as content and size of oxide inclusions. In this context, the Mg-Al-Ca system appears exceptionally challenging from a metallurgical perspective due to the high reactivity and high vapor pressures, so that conventional industrial techniques cannot be successfully deployed. Here, we demonstrate the applicability of various scientific synthesis methods from arc melting over solution growth to diffusion couples, extending to effects and parameters for thermo-mechanical processing. Suitable pathways to overcome the specific challenges of the Mg-Al-Ca system are demonstrated, as well as the persistent limitations of the current state of the art laboratory metallurgy technology.
△ Less
Submitted 15 March, 2023;
originally announced March 2023.
-
Control of Electrochemical Corrosion Properties by Influencing Mn Partitioning through Intercritically Annealing of Medium-Mn Steel
Authors:
René Daniel Pütz,
Tarek Allam,
Junmiao Wang,
Jakub Nowak,
Christian Haase,
Stefanie Sandlöbes-Haut,
Ulrich Krupp,
Daniela Zander
Abstract:
Medium-Mn steels exhibit excellent mechanical properties and lower production costs compared to high-Mn steels, which makes them a potential material for future application in the automotive industry. Intercritical annealing (ICA) after cold rolling allows to control the stacking fault energy (SFE) of austenite, the fraction of ferrite and reverted austenite, and the element partitioning (especial…
▽ More
Medium-Mn steels exhibit excellent mechanical properties and lower production costs compared to high-Mn steels, which makes them a potential material for future application in the automotive industry. Intercritical annealing (ICA) after cold rolling allows to control the stacking fault energy (SFE) of austenite, the fraction of ferrite and reverted austenite, and the element partitioning (especially Mn). Although Mn deteriorates the corrosion behavior of Fe-Mn-Al alloys, the influence of austenite fraction and element partitioning of Mn on the electrochemical corrosion behavior has not been investigated yet. Therefore, the electrochemical corrosion behavior in 0.1 M H2SO4 of X6MnAl12-3, which was intercritically annealed for 2 h at 550 °C, 600 °C and 700 °C, was investigated by potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS) and mass spectroscopy with inductively coupled plasma (ICP-MS). Additionally, specimens after 1 h and 24 h of immersion were examined via SEM to visualize the corrosion damage. The ICA specimens showed a selective dissolution of reverted austenite due to its micro-galvanic coupling with the adjacent ferrite. The severity of the micro-galvanic coupling can be reduced by decreasing the interface area as well as the chemical gradient of mainly Mn between ferrite and reverted austenite by ICA.
△ Less
Submitted 18 October, 2021;
originally announced October 2021.
-
Quantum Kibble-Zurek mechanism: Kink correlations after a quench in the quantum Ising chain
Authors:
Radosław J. Nowak,
Jacek Dziarmaga
Abstract:
The transverse field in the quantum Ising chain is linearly ramped from the para- to the ferromagnetic phase across the quantum critical point at a rate characterized by a quench time $τ_Q$. We calculate a connected kink-kink correlator in the final state at zero transverse field. The correlator is a sum of two terms: a negative (anti-bunching) Gaussian that depends on the Kibble-Zurek (KZ) correl…
▽ More
The transverse field in the quantum Ising chain is linearly ramped from the para- to the ferromagnetic phase across the quantum critical point at a rate characterized by a quench time $τ_Q$. We calculate a connected kink-kink correlator in the final state at zero transverse field. The correlator is a sum of two terms: a negative (anti-bunching) Gaussian that depends on the Kibble-Zurek (KZ) correlation length only and a positive term that depends on a second longer scale of length. The second length is made longer by dephasing of the state excited near the critical point during the following ramp across the ferromagnetic phase. This interpretation is corroborated by considering a linear ramp that is halted in the ferromagnetic phase for a finite waiting time and then continued at the same rate as before the halt. The extra time available for dephasing increases the second scale of length that asymptotically grows linearly with the waiting time. The dephasing also suppresses magnitude of the second term making it negligible for waiting times much longer than $τ_Q$. The same dephasing can be obtained with a smooth ramp that slows down in the ferromagnetic phase. Assuming sufficient dephasing we obtain also higher order kink correlators and the ferromagnetic correlation function.
△ Less
Submitted 27 August, 2021; v1 submitted 14 June, 2021;
originally announced June 2021.
-
Effect of Surface Roughness on Early Stage Oxidation Behavior of Ni-Base Superalloy IN 625
Authors:
Wojciech J. Nowak
Abstract:
In the present work the effect of surface roughness on oxidation behavior during the early stages of high temperature exposure of Ni-base superalloy IN 625 is described. The surface roughness was described using standard contact profilometer as well as novel method, fractal analysis. It was found that the different surface preparation resulted in a difference in roughness with a parameter increase…
▽ More
In the present work the effect of surface roughness on oxidation behavior during the early stages of high temperature exposure of Ni-base superalloy IN 625 is described. The surface roughness was described using standard contact profilometer as well as novel method, fractal analysis. It was found that the different surface preparation resulted in a difference in roughness with a parameter increase of at least one order of magnitude for the ground sample as compared with the polished sample. The oxidation test was performed in a horizontal tube furnace. Post exposure analyses including glow discharge optical emission spectrometry (GD OES) and scanning electron microscopy (SEM), which revealed that grinding lowers the oxidation kinetics of IN 625. It was found that surface preparation influences the oxide scale composition and morphology. The hypothesis explaining the mechanism responsible for the changes in oxidation behavior is proposed as well.
△ Less
Submitted 17 November, 2020;
originally announced November 2020.
-
Effect of Substrate Roughness on Oxidation Resistance of an Aluminized Ni-Base Superalloy
Authors:
Wojciech J. Nowak,
Kamil Ocha,
Patrycja Wierzba,
Kamil Gancarczyk,
Bartek Wierzba
Abstract:
In the present work, it is shown that the surface preparation method used on two Ni-based superalloys prior to aluminizing chemical vapor deposition (CVD) is one of the most important factors determining the oxidation resistance of aluminized Ni-based superalloys. It was found that grit blasting the substrate surface negatively affects the oxidation resistance of the aluminized coatings. For grit…
▽ More
In the present work, it is shown that the surface preparation method used on two Ni-based superalloys prior to aluminizing chemical vapor deposition (CVD) is one of the most important factors determining the oxidation resistance of aluminized Ni-based superalloys. It was found that grit blasting the substrate surface negatively affects the oxidation resistance of the aluminized coatings. For grit blasted and aluminized IN 625, a thicker outer NiAl coating was formed compared to that of IN 738. In contrast, no effect on NiAl coating thickness was found for grit blasted and aluminized IN 738. However, a thicker interdiffusion zone (IDZ) was observed. It was shown that the systems with grit-blasted surfaces reveal worse oxidation resistance during thermal shock tests, namely, a higher mass loss was observed for both grit blasted and aluminized alloys, as compared to ground and aluminized alloys. A possible reason for this effect of remaining alumina particles originating from surface grit blasting on the diffusion processes and stress distribution at the coating/substrate is proposed.
△ Less
Submitted 17 November, 2020;
originally announced November 2020.
-
Effect of surface mechanical treatment on the oxidation behavior of FeAl-model alloy
Authors:
Wojciech J. Nowak,
Daria Serafin,
Bartek Wierzba
Abstract:
Fe based alloys are commonly used in almost every sector of human life. For different reasons, the surfaces of the real parts are prepared using different methods, e.g., mirror-like polishing, grit-blasting, etc. The purpose of the present work is to answer the question how the surface preparation influences the oxidation behavior of Fe-based alloys. To answer this question, a high purity model al…
▽ More
Fe based alloys are commonly used in almost every sector of human life. For different reasons, the surfaces of the real parts are prepared using different methods, e.g., mirror-like polishing, grit-blasting, etc. The purpose of the present work is to answer the question how the surface preparation influences the oxidation behavior of Fe-based alloys. To answer this question, a high purity model alloy, Fe 5 wt Al, was isothermally oxidized in a thermogravimetrical furnace. The post-exposure analysis included SEM/EDS (WDS) and XRD. The surface roughness was determined by a contact and laser profilometer. The obtained results demonstrate that the mechanical surface preparation influences oxidation kinetics as well as the microstructure of the oxide scale formed on the alloy at both studied temperatures. Namely, polishing and grinding caused local formation of Fe-rich nodules and sub-layer of protective Al2O3. In contrast, gritblasting leads to the formation of a thick outer Fe-oxide and internal aluminum nitridation. A significant increase in the oxidation rate of the material after gritblasting was attributed to grain refinement in the near-surface region, resulting in an increase in easy diffusion paths, namely grain boundaries.
△ Less
Submitted 17 November, 2020;
originally announced November 2020.
-
Effect of Surface Treatment on High-Temperature Oxidation Behavior of IN 713C
Authors:
Wojciech J. Nowak,
Bartek Wierzba
Abstract:
The effects of surface preparations on oxidation kinetics and oxide scale morphology for the commercially available Ni-based superalloy IN 713C have been investigated. The ground and polished samples were exposed in air at 800-1100C. The ground specimens were found to demonstrate lower oxidation kinetics compared to those after polishing. The grinding also affected the oxide scale morphology, resu…
▽ More
The effects of surface preparations on oxidation kinetics and oxide scale morphology for the commercially available Ni-based superalloy IN 713C have been investigated. The ground and polished samples were exposed in air at 800-1100C. The ground specimens were found to demonstrate lower oxidation kinetics compared to those after polishing. The grinding also affected the oxide scale morphology, resulting in a protective alumina scale, while the polished samples developed Ni-/Cr-rich mixed oxides on the surface. Better oxidation resistance of the ground surfaces is related to a higher concentration of defects in the nearsurface region introduced by cold working. These defects facilitate the outward transport of the scaleforming element Al and thus are beneficial for protective oxidation. The oxidation mechanism at lower temperatures was introduced. The model based on the generalized Darken method and multiphase approximation was proposed.
△ Less
Submitted 17 November, 2020;
originally announced November 2020.
-
The effect of surface preparation on high temperature oxidation of Ni, Cu and Ni-Cu alloy
Authors:
Daria Serafin,
Wojciech J. Nowak,
Bartek Wierzba
Abstract:
In the present paper, the analysis of polishing, grinding and sand-blasting processes on oxidation behavior of nickel, copper and nickel-copper alloy has been investigated. Surface roughness has been measured using two methods: by contact profilometer and by fractal analysis. It has been proved that sand-blasting process influences the surface roughness the most but also contaminates the surface w…
▽ More
In the present paper, the analysis of polishing, grinding and sand-blasting processes on oxidation behavior of nickel, copper and nickel-copper alloy has been investigated. Surface roughness has been measured using two methods: by contact profilometer and by fractal analysis. It has been proved that sand-blasting process influences the surface roughness the most but also contaminates the surface with alumina particles. The oxidation tests were performed in thermogravimetrical furnace. The obtained mass gain plots, SEM microphotographs of cross-sections and SEM EDS analysis of the samples prove that surface preparation changes oxidation kinetics morphology of the polished and ground samples does not vary significantly after oxidation at investigated temperatures, but differences in oxide layer thicknesses and mass gains were observed. Oxidized sandblasted samples reveal that increased surface roughness and alumina intrusions change the oxidation process mixed Al (Ni, Cu or Ni-Cu) oxide is formed and separate Al2O3 particles are visible. The results prove that surface preparation influence high temperature oxidation of the samples by promoting new diffusion mechanism.
△ Less
Submitted 17 November, 2020; v1 submitted 30 September, 2019;
originally announced September 2019.
-
Mechanically prepared copper surface in oxidizing and non-oxidizing conditions
Authors:
Daria Serafin,
Wojciech J. Nowak,
Bartek Wierzba
Abstract:
In the present work surface roughness of copper samples after mechanical surface preparation processes (polishing, grinding, sand-blasting) and after exposure in non-oxidizing (high purity argon) and oxidizing (air) conditions at 700 and 750°C have been evaluated by contact profilometer and by fractal analysis. Quantitative description of surfaces that are hidden from the sight of conventional met…
▽ More
In the present work surface roughness of copper samples after mechanical surface preparation processes (polishing, grinding, sand-blasting) and after exposure in non-oxidizing (high purity argon) and oxidizing (air) conditions at 700 and 750°C have been evaluated by contact profilometer and by fractal analysis. Quantitative description of surfaces that are hidden from the sight of conventional methods is possible by fractal analysis, e.g. in the present work, the roughness of Cu2O/Cu boundary has been evaluated under oxide layer. It has been pointed out, that in both oxidizing and non-oxidizing conditions initial surface roughness of copper is affected by annealing at high temperature: at 700°C surface roughness of polished and ground samples increased but at 750°C decreased in comparison to surface roughness prior to heat treatment. For sand-blasted samples in both oxidizing and non-oxidizing conditions the lowest values of surface roughness parameters were obtained at 750°C. It is then concluded that two phenomena are responsible for such effect: chemical reaction between copper and oxygen and surface diffusion of copper due to high temperature of annealing.
△ Less
Submitted 17 November, 2020; v1 submitted 30 September, 2019;
originally announced September 2019.
-
The calculation of the diffusion coefficients in ternary multiphase Ti-NiAl system
Authors:
Daria Serafin,
Wojciech J. Nowak,
Bartek Wierzba
Abstract:
In this paper the problem of determination of the diffusion coefficients in a ternary multiphase system is discussed. In the literature there is a lack of data concerning the approximation method which allows to determine diffusion coefficients in such complicated systems. We propose the mass conservation method (MCA) for calculation the diffusivities in phases where the differences in composition…
▽ More
In this paper the problem of determination of the diffusion coefficients in a ternary multiphase system is discussed. In the literature there is a lack of data concerning the approximation method which allows to determine diffusion coefficients in such complicated systems. We propose the mass conservation method (MCA) for calculation the diffusivities in phases where the differences in composition is linear. Only one experimental results is needed for determination of the diffusion data. The method is implemented and checked under ternary Ti-NiAl system - this system characterize occurrence three intermetallic phases in diffusion couple Ti-NiAl.
△ Less
Submitted 17 November, 2020; v1 submitted 30 September, 2019;
originally announced September 2019.
-
Reversible magnetomechanical collapse: virtual touching and detachment of rigid inclusions in a soft elastic matrix
Authors:
Mate Puljiz,
Shilin Huang,
Karl A. Kalina,
Johannes Nowak,
Stefan Odenbach,
Markus Kästner,
Günter K. Auernhammer,
Andreas M. Menzel
Abstract:
Soft elastic composite materials containing particulate rigid inclusions in a soft elastic matrix are candidates for developing soft actuators or tunable damping devices. The possibility to reversibly drive the rigid inclusions within such a composite together to a close-to-touching state by an external stimulus would offer important benefits. Then, a significant tuning of the mechanical propertie…
▽ More
Soft elastic composite materials containing particulate rigid inclusions in a soft elastic matrix are candidates for developing soft actuators or tunable damping devices. The possibility to reversibly drive the rigid inclusions within such a composite together to a close-to-touching state by an external stimulus would offer important benefits. Then, a significant tuning of the mechanical properties could be achieved due to the resulting mechanical hardening. For a long time, it has been argued whether a virtual touching of the embedded magnetic particles with subsequent detachment can actually be observed in real materials, and if so, whether the process is reversible. Here, we present experimental results that demonstrate this phenomenon in reality. Our system consists of two paramagnetic nickel particles embedded at finite initial distance in a soft elastic polymeric gel matrix. Magnetization in an external magnetic field tunes the magnetic attraction between the particles and drives the process. We quantify the scenario by different theoretical tools, i.e., explicit analytical calculations in the framework of linear elasticity theory, a projection onto simplified dipole-spring models, as well as detailed finite-element simulations. From these different approaches, we conclude that in our case the cycle of virtual touching and detachment shows hysteretic behavior due to the mutual magnetization between the paramagnetic particles. Our results are important for the design and construction of reversibly tunable mechanical damping devices. Moreover, our projection on dipole-spring models allows the formal connection of our description to various related systems, e.g., magnetosome filaments in magnetotactic bacteria.
△ Less
Submitted 20 October, 2018;
originally announced October 2018.
-
Magnetism and charge density waves in RNiC$_2$ (R = Ce, Pr, Nd)
Authors:
Kamil K. Kolincio,
Marta Roman,
Michał J. Winiarski,
Judyta Strychalska - Nowak,
Tomasz Klimczuk
Abstract:
We have compared the magnetic, transport, galvanomagnetic and specific heat properties of CeNiC$_2$, PrNiC$_2$ and NdNiC$_2$ to study the interplay between charge density waves and magnetism in these compounds. The negative magnetoresistance in NdNiC$_2$ is discussed in terms of the partial destruction of charge density waves and an irreversible phase transition stabilized by the field induced fer…
▽ More
We have compared the magnetic, transport, galvanomagnetic and specific heat properties of CeNiC$_2$, PrNiC$_2$ and NdNiC$_2$ to study the interplay between charge density waves and magnetism in these compounds. The negative magnetoresistance in NdNiC$_2$ is discussed in terms of the partial destruction of charge density waves and an irreversible phase transition stabilized by the field induced ferromagnetic transformation is reported. For PrNiC$_2$ we demonstrate that the magnetic field initially weakens the CDW state, due to the Zeeman splitting of conduction bands. However, the Fermi surface nesting is enhanced at a temperature related to the magnetic anomaly.
△ Less
Submitted 2 June, 2017;
originally announced June 2017.
-
Field induced suppression of charge density wave in GdNiC$_2$
Authors:
Kamil K. Kolincio,
Karolina Górnicka,
Michał J. Winiarski,
Judyta Strychalska - Nowak,
Tomasz Klimczuk
Abstract:
We report the specific heat, magnetic, magnetotransport and galvanomagnetic properties of polycrystalline GdNiC$_2$. In the intermediate temperature region above $T_N$ = 20 K, we observe large negative magnetoresistance due to Zeeman splitting of the electronic bands and partial destruction of a charge density wave ground state. Our magnetoresistance and Hall measurements show that at low temperat…
▽ More
We report the specific heat, magnetic, magnetotransport and galvanomagnetic properties of polycrystalline GdNiC$_2$. In the intermediate temperature region above $T_N$ = 20 K, we observe large negative magnetoresistance due to Zeeman splitting of the electronic bands and partial destruction of a charge density wave ground state. Our magnetoresistance and Hall measurements show that at low temperatures a magnetic field induced transformation from antiferromagnetic order to a metamagnetic phase results in the partial suppression of the CDW.
△ Less
Submitted 9 November, 2016;
originally announced November 2016.
-
Buckling of paramagnetic chains in soft gels
Authors:
Shilin Huang,
Giorgio Pessot,
Peet Cremer,
Rudolf Weeber,
Christian Holm,
Johannes Nowak,
Stefan Odenbach,
Andreas M. Menzel,
Günter K. Auernhammer
Abstract:
We study the magneto-elastic coupling behavior of paramagnetic chains in soft polymer gels exposed to external magnetic fields. To this end, a laser scanning confocal microscope is used to observe the morphology of the paramagnetic chains together with the deformation field of the surrounding gel network. The paramagnetic chains in soft polymer gels show rich morphological shape changes under obli…
▽ More
We study the magneto-elastic coupling behavior of paramagnetic chains in soft polymer gels exposed to external magnetic fields. To this end, a laser scanning confocal microscope is used to observe the morphology of the paramagnetic chains together with the deformation field of the surrounding gel network. The paramagnetic chains in soft polymer gels show rich morphological shape changes under oblique magnetic fields, in particular a pronounced buckling deformation. The details of the resulting morphological shapes depend on the length of the chain, the strength of the external magnetic field, and the modulus of the gel. Based on the observation that the magnetic chains are strongly coupled to the surrounding polymer network, a simplified model is developed to describe their buckling behavior. A coarse-grained molecular dynamics simulation model featuring an increased matrix stiffness on the surfaces of the particles leads to morphologies in agreement with the experimentally observed buckling effects.
△ Less
Submitted 15 April, 2015;
originally announced April 2015.
