-
Screening magnetic fields by a superconducting disk: a simple model
Authors:
J. -G. Caputo,
L. Gozzelino,
F. Laviano,
G. Ghigo,
R. Gerbaldo,
J. Noudem,
Y. Thimont,
P. Bernstein
Abstract:
We introduce a simple approach to evaluate the magnetic field distribution around superconducting samples, based on the London equations; the elementary variable is the vector potential. This procedure has no adjustable parameters, only the sample geometry and the London length, $λ$, determine the solution. The calculated field reproduces quantitatively the measured induction field above MgB$_2$ d…
▽ More
We introduce a simple approach to evaluate the magnetic field distribution around superconducting samples, based on the London equations; the elementary variable is the vector potential. This procedure has no adjustable parameters, only the sample geometry and the London length, $λ$, determine the solution. The calculated field reproduces quantitatively the measured induction field above MgB$_2$ disks of different diameters, at 20K and for applied fields lower than 0.4T. The model can be applied if the flux line penetration inside the sample can be neglected when calculating the induction field distribution outside the superconductor. Finally we show on a cup-shape geometry how one can design a magnetic shield satisfying a specific constraint.
△ Less
Submitted 9 August, 2013;
originally announced August 2013.
-
Enhanced thermoelectric performance in spark plasma textured bulk n-type BiTe2.7Se0.3 and p-type Bi0.5Sb1.5Te3
Authors:
Shekhar D. Bhame,
Dhanapal Pravarthana,
Wilfrid Prellier,
Jacques G. Noudem
Abstract:
Bulk p and n-type bismuth telluride were prepared using spark plasma texturization method. The texture development along the uniaxial load in the 001 direction is confirmed from both x-ray diffraction analysis and Electron Backscattering Diffraction measurements. Interestingly, those textured samples outperform the samples prepared by conventional spark plasma sintering (SPS) leading to a reduced…
▽ More
Bulk p and n-type bismuth telluride were prepared using spark plasma texturization method. The texture development along the uniaxial load in the 001 direction is confirmed from both x-ray diffraction analysis and Electron Backscattering Diffraction measurements. Interestingly, those textured samples outperform the samples prepared by conventional spark plasma sintering (SPS) leading to a reduced thermal conductivity in the ab-plane. The textured samples of n- type BiTe2.7Se0.3 and p-type Bi0.5Sb1.5Te3 showed a 42% and 33% enhancement in figure of merit at room temperature respectively, as compared to their SPS counterparts, opening the route for applications.
△ Less
Submitted 31 May, 2013; v1 submitted 10 May, 2013;
originally announced May 2013.
-
The decrease of the critical current of coated conductors when a perpendicular magnetic field is applied : a Josephson effect point of view
Authors:
C. McLoughlin,
Y. Thimont,
J. Noudem,
C. Harnois,
P. Bernstein
Abstract:
A large decrease is observed in the critical current density of YBCO coated conductors (CC) and related compounds when a strong perpendicular magnetic field is applied. While measurements are generally carried out at 77K only, here we present a magnetic technique permitting to determine the critical current per unit width of conductor (Icr/w) in a large temperature range. We report measurements ca…
▽ More
A large decrease is observed in the critical current density of YBCO coated conductors (CC) and related compounds when a strong perpendicular magnetic field is applied. While measurements are generally carried out at 77K only, here we present a magnetic technique permitting to determine the critical current per unit width of conductor (Icr/w) in a large temperature range. We report measurements carried out on various CCs that show that, in addition to the reduction in the critical temperature that can be attributed to the low value of the irreversibility field near Tc, the field application results in a large decrease of Icr/w at all temperatures. We ascribe this reduction to the Josephson behaviour of the twin boundaries included in the YBCO layer.
△ Less
Submitted 24 July, 2012;
originally announced July 2012.
-
Effects of high pressure on the physical properties of MgB2
Authors:
T. Prikhna,
W. Gawalek,
Ya. Savchuk,
A. Soldatov,
V. Sokolovsky,
M. Eisterer,
H. W. Weber,
J. Noudem,
M. Serga,
V. Turkevich,
M. Tompsic,
V. Tkach,
N. Danilenko,
W. Goldacker,
F. Karau,
I. Fesenko,
M. Rindfleisch,
J. Dellith,
M. Wendt,
S. You,
V. Meerovich,
S. Dub,
V. Moshchil,
N. Sergienko,
A. Kozyrev
, et al. (5 additional authors not shown)
Abstract:
The synthesis of MgB2-based materials under high pressure gave the possibility to suppress the evaporation of magnesium and to obtain near theoretically dense nanograined structures with high superconducting, thermal conducting, and mechanical characteristics: critical current densities of 1.8-1.0 \cdot 106 A/cm2 in the self field and 103 A/cm2 in a magnetic field of 8 T at 20 K, 5-3 \cdot 105 A/c…
▽ More
The synthesis of MgB2-based materials under high pressure gave the possibility to suppress the evaporation of magnesium and to obtain near theoretically dense nanograined structures with high superconducting, thermal conducting, and mechanical characteristics: critical current densities of 1.8-1.0 \cdot 106 A/cm2 in the self field and 103 A/cm2 in a magnetic field of 8 T at 20 K, 5-3 \cdot 105 A/cm2 in self field at 30 K, the corresponding critical fields being HC2 = 15 T at 22 K and irreversible fields Hirr =13 T at 20 K, and Hirr =3.5 T at 30 K, thermal conduction of 53+/-2 W/(m \cdot κ), the Vickers hardness Hv=10.12+/-0.2 GPa under a load of 148.8 N and the fracture toughness K1C = 7.6+/-2.0 MPa m0.5 under the same load, the Young modulus E=213 GPa. Estimation of quenching current and AC losses allowed the conclusion that highpressure-prepared materials are promising for application in transformer-type fault current limiters working at 20-30 K.
△ Less
Submitted 12 May, 2010;
originally announced May 2010.
-
Inhomogeneity of Magnesium Diboride Structure and its Effect on Critical Current Density
Authors:
T. Prikhna,
W. Gawalek,
Ya. Savchuk,
A. Kozyrev,
M. Wendt,
J. Dellith,
W. Goldacker,
S. Dub,
N. Sergienko,
T. Habisreuther,
V. Moshchil,
U. Dittrich,
W. Karau,
J. Noudem,
Ch. Schmidt,
V. Turkevich,
D. Litzkendorf,
H. Weber,
M. Eisterer,
V. Melnikov,
P. Nagorny,
V. Sverdun
Abstract:
The influence of the oxygen segregation into Mg-B-O inclusions (which are oxygen enriched as compared to the matrix material) and the formation of boron enriched phases (with near MgB12 composition) in MgB2 structure on pinning in magnesium diboride and the effect of SiC and Ti alloying on the formation of structural inhomogenities in MgB2 are discussed. A nanostructural material of near theoret…
▽ More
The influence of the oxygen segregation into Mg-B-O inclusions (which are oxygen enriched as compared to the matrix material) and the formation of boron enriched phases (with near MgB12 composition) in MgB2 structure on pinning in magnesium diboride and the effect of SiC and Ti alloying on the formation of structural inhomogenities in MgB2 are discussed. A nanostructural material of near theoretical density (2.7 g/cm3) based on MgB2-SiC (10 wt. percents of 200-800 nm SiC was added), which is characterized by high jc (1000000 A/cm2 in 1 T - 100000 A/cm2 in 3.5 T at 20 K and 100000 A/cm2 at 35 K) has been synthesized at 2 GPa.
△ Less
Submitted 24 December, 2009;
originally announced December 2009.
-
Measurement of the magnetic field inside the holes of a drilled bulk high-Tc superconductor
Authors:
Gregory P Lousberg,
Jean-Francois Fagnard,
Jacques G Noudem,
Marcel Ausloos,
Benoit Vanderheyden,
Philippe Vanderbemden
Abstract:
We use macroscopic holes drilled in a bulk YBCO superconductor to probe its magnetic properties in the volume of the sample. The sample is subjected to an AC magnetic flux with a density ranging from 30mT to 130mT and the flux in the superconductor is probed by miniature coils inserted in the holes. In a given hole, three different penetration regimes can be observed: (i) the shielded regime, wh…
▽ More
We use macroscopic holes drilled in a bulk YBCO superconductor to probe its magnetic properties in the volume of the sample. The sample is subjected to an AC magnetic flux with a density ranging from 30mT to 130mT and the flux in the superconductor is probed by miniature coils inserted in the holes. In a given hole, three different penetration regimes can be observed: (i) the shielded regime, where no magnetic flux threads the hole; (ii) the gradual penetration regime, where the waveform of the magnetic field has a clipped sine shape whose fundamental component scales with the applied field; and (iii) the flux concentration regime, where the waveform of the magnetic field is nearly a sine wave, with an amplitude exceeding that of the applied field by up to a factor of two. The distribution of the penetration regimes in the holes is compared with that of the magnetic flux density at the top and bottom surfaces of the sample, and is interpreted with the help of optical polarized light micrographs of these surfaces. We show that the measurement of the magnetic field inside the holes can be used as a local characterization of the bulk magnetic properties of the sample.
△ Less
Submitted 12 November, 2008;
originally announced November 2008.
-
Strongly correlated properties of the thermoelectric cobalt oxide Ca3Co4O9
Authors:
P. Limelette,
V. Hardy,
P. Auban-Senzier,
D. Jerome,
D. Flahaut,
S. Hebert,
R. Fresard,
Ch. Simon,
J. Noudem,
A. Maignan
Abstract:
We have performed both in-plane resistivity, Hall effect and specific heat measurements on the thermoelectric cobalt oxide Ca$_{3}$Co$_{4}$O$_{9}$. Four distinct transport regimes are found as a function of temperature, corresponding to a low temperature insulating one up to $T_{min}\approx $63 K, a strongly correlated Fermi liquid up to $T^*\approx $140 K, with $ρ=ρ_0+AT^2$ and $A\approx 3.63$…
▽ More
We have performed both in-plane resistivity, Hall effect and specific heat measurements on the thermoelectric cobalt oxide Ca$_{3}$Co$_{4}$O$_{9}$. Four distinct transport regimes are found as a function of temperature, corresponding to a low temperature insulating one up to $T_{min}\approx $63 K, a strongly correlated Fermi liquid up to $T^*\approx $140 K, with $ρ=ρ_0+AT^2$ and $A\approx 3.63$ $10^{-2} μΩcm/K^{2}$, followed by an incoherent metal with $k_Fl\leq 1$ and a high temperature insulator above T$^{**}\approx $510 K . Specific heat Sommerfeld coefficient $γ= 93$ mJ/(mol.K$^{2}$) confirms a rather large value of the electronic effective mass and fulfils the Kadowaki-Woods ratio $A/γ^2 \approx 0.45$ 10$^{-5}$ $μΩcm.K^2/(mJ^2mol^{-2})$. Resistivity measurements under pressure reveal a decrease of the Fermi liquid transport coefficient A with an increase of $T^*$ as a function of pressure while the product $A(T^*)^2/a$ remains constant and of order $h/e^2$. Both thermodynamic and transport properties suggest a strong renormalization of the quasiparticles coherence scale of order $T^*$ that seems to govern also thermopower.
△ Less
Submitted 19 May, 2005;
originally announced May 2005.
