Showing 1–27 of 27 results for author: Norris, J

Diffraction of Light from Optical Fourier Surfaces

Authors: Yannik M. Glauser, J. J. Erik Maris, Raphael Brechbühler, Juri G. Crimmann, Valentina G. De Rosa, Daniel Petter, Gabriel Nagamine, Nolan Lassaline, David J. Norris

Abstract: Diffractive surfaces shape optical wavefronts for applications in spectroscopy, high-speed communication, and imaging. The performance of these structures is primarily determined by how precisely they can be patterned. Fabrication constraints commonly lead to square-shaped, "binary" profiles that contain unwanted spatial frequencies that contaminate the diffraction. Recently, "wavy" surfaces (know… ▽ More Diffractive surfaces shape optical wavefronts for applications in spectroscopy, high-speed communication, and imaging. The performance of these structures is primarily determined by how precisely they can be patterned. Fabrication constraints commonly lead to square-shaped, "binary" profiles that contain unwanted spatial frequencies that contaminate the diffraction. Recently, "wavy" surfaces (known as optical Fourier surfaces, OFSs) have been introduced that include only the desired spatial frequencies. However, the optical performance and reliability of these structures have not yet been experimentally tested with respect to models and simulations. Such a quantitative investigation could also provide previously unobtainable information about the diffraction process from the most fundamental diffractive surfaces$\unicode{x2014}$sinusoidally pure profiles. Here, we produce and study two classes of reflective OFSs: (i) single-sinusoidal profiles of varying depth and (ii) double-sinusoidal profiles with varying relative phase. After refining our fabrication procedure to obtain larger and deeper OFSs at higher yields, we find that the measured optical responses from our OFSs agree quantitatively with full electrodynamic simulations. In contrast, our measurements diverge from analytical scalar diffraction models routinely used by researchers to describe diffraction. Overall, our results confirm that OFSs provide a precise and powerful platform for Fourier-spectrum engineering, satisfying the growing demand for intricately patterned interfaces for applications in holography, augmented reality, and optical computing. △ Less

Submitted 17 January, 2025; originally announced January 2025.

High-Throughput Identification and Statistical Analysis of Atomically Thin Semiconductors

Authors: Juri G. Crimmann, Moritz N. Junker, Yannik M. Glauser, Nolan Lassaline, Gabriel Nagamine, David J. Norris

Abstract: Transition metal dichalcogenides (TMDs) are layered two-dimensional semiconductors explored for various optoelectronic applications, ranging from light-emitting diodes to single-photon emitters. To interact strongly with light, such devices require monolayer TMDs, which exhibit a direct bandgap. These atomically thin sheets are typically obtained through mechanical exfoliation followed by manual i… ▽ More Transition metal dichalcogenides (TMDs) are layered two-dimensional semiconductors explored for various optoelectronic applications, ranging from light-emitting diodes to single-photon emitters. To interact strongly with light, such devices require monolayer TMDs, which exhibit a direct bandgap. These atomically thin sheets are typically obtained through mechanical exfoliation followed by manual identification with a brightfield optical microscope. While this traditional procedure provides high-quality crystals, the identification step is time-intensive, low-throughput, and prone to human error, creating a significant bottleneck for TMD research. Here, we report a simple and fully automated approach for high-throughput identification of TMD monolayers using photoluminescence microscopy. Compared to a manual search and verification, our methodology offers a four-orders-of-magnitude decrease in the time a researcher must invest per identified monolayer. This ability enables us to measure geometric and photoluminescence-intensity features of more than 2,400 monolayers and bilayers of WSe$_2$, MoSe$_2$, and MoS$_2$. Due to these large numbers, we can study and quantify material properties previously inaccessible. For example, we show that the mean photoluminescence intensity from a monolayer correlates with its size due to reduced emission from its edges. Further, we observe large variations in brightness (up to 10$\times$) from WSe$_2$ monolayers of different batches produced by the same supplier. Therefore, our automated approach not only increases fabrication efficiency but also enhances sample quality for optoelectronic devices of atomically thin semiconductors. △ Less

Submitted 12 July, 2024; originally announced July 2024.

Spectroscopy of Single CdSe Magic-Sized Nanocrystals

Authors: Gabriel Nagamine, Julian Santen, Juri G. Crimmann, Aniket S. Mule, Andrew B. Pun, David J. Norris

Abstract: Chemical syntheses that provide nanocrystals (NCs) with narrow distributions in size and shape are critical for NC research. This has led to the investigation of magic-sized NCs (MSNCs), a class of semiconductor crystallites that grow in discrete steps, potentially offering a single size and shape (i.e., monodispersity). However, the photoluminescence (PL) spectra of CdSe MSNCs measured at room te… ▽ More Chemical syntheses that provide nanocrystals (NCs) with narrow distributions in size and shape are critical for NC research. This has led to the investigation of magic-sized NCs (MSNCs), a class of semiconductor crystallites that grow in discrete steps, potentially offering a single size and shape (i.e., monodispersity). However, the photoluminescence (PL) spectra of CdSe MSNCs measured at room temperature have been reported to be broader than those of state-of-the-art quantum dots. This difference could be due to the smaller size of MSNCs, which broadens their line widths, or due to their residual size dispersity. To better understand the optical performance of MSNCs, here we perform single-particle spectroscopy. Our results show that, while CdSe MSNCs do exhibit particle-to-particle variations that lead to modest broadening of their ensemble emission spectra, the largest contribution comes from the single-particle line width. By examining MSNCs with different sizes and shells, we conclude that this single-particle broadening is consistent with exciton coupling to acoustic phonons from the NC surface. Because of their small size, this coupling and the role of residual size dispersity have a larger impact on the ensemble emission line widths. Notably, when small (<2.7 nm diameter) MSNCs and quantum dots are compared, the ensemble PL line widths of MSNCs are actually sharper. Due to their small size, MSNCs also exhibit strong anti-bunching $[g^{(2)}(0) \sim 0.05]$ at room temperature. Thus, MSNCs represent a bright, spectrally pure class of quantum emitter, useful for applications in optoelectronic and quantum-information technologies where strong three-dimensional confinement is required. △ Less

Submitted 12 July, 2024; originally announced July 2024.

Electrically defined quantum dots for bosonic excitons

Authors: Deepankur Thureja, F. Emre Yazici, Tomasz Smolenski, Martin Kroner, David J. Norris, Atac Imamoglu

Abstract: Quantum dots are semiconductor nano-structures where particle motion is confined in all three spatial dimensions. Since their first experimental realization, nanocrystals confining the quanta of polarization waves, termed excitons, have found numerous applications in fields ranging from single photon sources for quantum information processing to commercial displays. A major limitation to further e… ▽ More Quantum dots are semiconductor nano-structures where particle motion is confined in all three spatial dimensions. Since their first experimental realization, nanocrystals confining the quanta of polarization waves, termed excitons, have found numerous applications in fields ranging from single photon sources for quantum information processing to commercial displays. A major limitation to further extending the range of potential applications has been the large inhomogeneity in, and lack-of tunability of, exciton energy that is generic to quantum dot materials. Here, we address this challenge by demonstrating electrically-defined quantum dots for excitons in monolayer semiconductors where the discrete exciton energies can be tuned using applied gate voltages. Resonance fluorescence measurements show strong spectral jumps and blinking of these resonances, verifying their zero-dimensional nature. Our work paves the way for realizing quantum confined bosonic modes where nonlinear response would arise exclusively from exciton--exciton interactions. △ Less

Submitted 4 March, 2024; v1 submitted 29 February, 2024; originally announced February 2024.

Comments: updated version

Double-Rashba materials for nanocrystals with bright ground-state excitons

Authors: Michael W. Swift, Peter C. Sercel, Alexander L. Efros, John L. Lyons, David J. Norris

Abstract: While nanoscale semiconductor crystallites provide versatile fluorescent materials for light-emitting devices, such nanocrystals suffer from the "dark exciton"$\unicode{x2014}$an optically inactive electronic state into which the nanocrystal relaxes before emitting. Recently, a theoretical mechanism was discovered that can potentially defeat the dark exciton. The Rashba effect can invert the order… ▽ More While nanoscale semiconductor crystallites provide versatile fluorescent materials for light-emitting devices, such nanocrystals suffer from the "dark exciton"$\unicode{x2014}$an optically inactive electronic state into which the nanocrystal relaxes before emitting. Recently, a theoretical mechanism was discovered that can potentially defeat the dark exciton. The Rashba effect can invert the order of the lowest-lying levels, creating a bright excitonic ground state. To identify materials that exhibit this behavior, here we perform an extensive high-throughput computational search of two large open-source materials databases. Based on a detailed understanding of the Rashba mechanism, we define proxy criteria and screen over 500,000 solids, generating 173 potential "bright-exciton" materials. We then refine this list with higher-level first-principles calculations to obtain 28 candidates. To confirm the potential of these compounds, we select five and develop detailed effective-mass models to determine the nature of their lowest-energy excitonic state. We find that four of the five solids (BiTeCl, BiTeI, Ga$_2$Te$_3$, and KIO$_3$) can yield bright ground-state excitons. Our approach thus reveals promising materials for future experimental investigation of bright-exciton nanocrystals. △ Less

Submitted 30 October, 2023; originally announced October 2023.

Comments: 19 pages, 4 figures

Journal ref: ACS Nano 18, 30, 19561-19567 (2024)

Intermodulation Distortion in a Josephson Traveling Wave Parametric Amplifier

Authors: Ants Remm, Sebastian Krinner, Nathan Lacroix, Christoph Hellings, Francois Swiadek, Graham Norris, Christopher Eichler, Andreas Wallraff

Abstract: Josephson traveling wave parametric amplifiers enable the amplification of weak microwave signals close to the quantum limit with large bandwidth, which has a broad range of applications in superconducting quantum computing and in the operation of single-photon detectors. While the large bandwidth allows for their use in frequency-multiplexed detection architectures, an increased number of readout… ▽ More Josephson traveling wave parametric amplifiers enable the amplification of weak microwave signals close to the quantum limit with large bandwidth, which has a broad range of applications in superconducting quantum computing and in the operation of single-photon detectors. While the large bandwidth allows for their use in frequency-multiplexed detection architectures, an increased number of readout tones per amplifier puts more stringent requirements on the dynamic range to avoid saturation. Here, we characterize the undesired mixing processes between the different frequency-multiplexed tones applied to a Josephson traveling wave parametric amplifier, a phenomenon also known as intermodulation distortion. The effect becomes particularly significant when the amplifier is operated close to its saturation power. Furthermore, we demonstrate that intermodulation distortion can lead to significant crosstalk and reduction of fidelity for multiplexed readout of superconducting qubits. We suggest using large detunings between the pump and signal frequencies to mitigate crosstalk. Our work provides insights into the limitations of current Josephson traveling wave parametric amplifiers and highlights the importance of performing further research on these devices. △ Less

Submitted 10 October, 2022; originally announced October 2022.

Comments: 11 pages, 12 figures

Journal ref: Phys. Rev. Applied 20, 034027 (2023)

Realizing Repeated Quantum Error Correction in a Distance-Three Surface Code

Authors: Sebastian Krinner, Nathan Lacroix, Ants Remm, Agustin Di Paolo, Elie Genois, Catherine Leroux, Christoph Hellings, Stefania Lazar, Francois Swiadek, Johannes Herrmann, Graham J. Norris, Christian Kraglund Andersen, Markus Müller, Alexandre Blais, Christopher Eichler, Andreas Wallraff

Abstract: Quantum computers hold the promise of solving computational problems which are intractable using conventional methods. For fault-tolerant operation quantum computers must correct errors occurring due to unavoidable decoherence and limited control accuracy. Here, we demonstrate quantum error correction using the surface code, which is known for its exceptionally high tolerance to errors. Using 17 p… ▽ More Quantum computers hold the promise of solving computational problems which are intractable using conventional methods. For fault-tolerant operation quantum computers must correct errors occurring due to unavoidable decoherence and limited control accuracy. Here, we demonstrate quantum error correction using the surface code, which is known for its exceptionally high tolerance to errors. Using 17 physical qubits in a superconducting circuit we encode quantum information in a distance-three logical qubit building up on recent distance-two error detection experiments. In an error correction cycle taking only $1.1\,μ$s, we demonstrate the preservation of four cardinal states of the logical qubit. Repeatedly executing the cycle, we measure and decode both bit- and phase-flip error syndromes using a minimum-weight perfect-matching algorithm in an error-model-free approach and apply corrections in postprocessing. We find a low error probability of $3\,\%$ per cycle when rejecting experimental runs in which leakage is detected. The measured characteristics of our device agree well with a numerical model. Our demonstration of repeated, fast and high-performance quantum error correction cycles, together with recent advances in ion traps, support our understanding that fault-tolerant quantum computation will be practically realizable. △ Less

Submitted 7 December, 2021; originally announced December 2021.

Comments: 28 pages, 17 figures

Freeform nanostructuring of hexagonal boron nitride

Authors: Nolan Lassaline, Deepankur Thureja, Thibault Chervy, Daniel Petter, Puneet A. Murthy, Armin W. Knoll, David J. Norris

Abstract: Hexagonal boron nitride (hBN)-long-known as a thermally stable ceramic-is now available as atomically smooth, single-crystalline flakes, revolutionizing its use in optoelectronics. For nanophotonics, these flakes offer strong nonlinearities, hyperbolic dispersion, and single-photon emission, providing unique properties for optical and quantum-optical applications. For nanoelectronics, their pristi… ▽ More Hexagonal boron nitride (hBN)-long-known as a thermally stable ceramic-is now available as atomically smooth, single-crystalline flakes, revolutionizing its use in optoelectronics. For nanophotonics, these flakes offer strong nonlinearities, hyperbolic dispersion, and single-photon emission, providing unique properties for optical and quantum-optical applications. For nanoelectronics, their pristine surfaces, chemical stability, and wide bandgap have made them the key substrate, encapsulant, and gate dielectric for two-dimensional electronic devices. However, while exploring these advantages, researchers have been restricted to flat flakes or those patterned with basic slits and holes, severely limiting advanced architectures. If freely varying flake profiles were possible, the hBN structure would present a powerful design parameter to further manipulate the flow of photons, electrons, and excitons in next-generation devices. Here, we demonstrate freeform nanostructuring of hBN by combining thermal scanning-probe lithography and reactive-ion etching to shape flakes with surprising fidelity. We leverage sub-nanometer height control and high spatial resolution to produce previously unattainable flake structures for a broad range of optoelectronic applications. For photonics, we fabricate microelements and show the straightforward transfer and integration of such elements by placing a spherical hBN microlens between two planar mirrors to obtain a stable, high-quality optical microcavity. We then decrease the patterning length scale to introduce Fourier surfaces for electrons, creating sophisticated, high-resolution landscapes in hBN, offering new possibilities for strain and band-structure engineering. These capabilities can advance the discovery and exploitation of emerging phenomena in hyperbolic metamaterials, polaritonics, twistronics, quantum materials, and 2D optoelectronic devices. △ Less

Submitted 27 May, 2021; originally announced May 2021.

Tunable quantum confinement of neutral excitons using electric fields and exciton-charge interactions

Authors: Deepankur Thureja, Atac Imamoglu, Tomasz Smolenski, Alexander Popert, Thibault Chervy, Xiaobo Lu, Song Liu, Katayun Barmak, Kenji Watanabe, Takashi Taniguchi, David J. Norris, Martin Kroner, Puneet A. Murthy

Abstract: Quantum confinement is the discretization of energy when motion of particles is restricted to length scales smaller than their de Broglie wavelength. The experimental realization of this effect has had wide ranging impact in diverse fields of physics and facilitated the development of new technologies. In semiconductor physics, quantum confinement of optically excited quasiparticles, such as excit… ▽ More Quantum confinement is the discretization of energy when motion of particles is restricted to length scales smaller than their de Broglie wavelength. The experimental realization of this effect has had wide ranging impact in diverse fields of physics and facilitated the development of new technologies. In semiconductor physics, quantum confinement of optically excited quasiparticles, such as excitons or trions, is typically achieved by modulation of material properties - an approach crucially limited by the lack of insitu tunability and scalability of confining potentials. Achieving fully tunable quantum confinement of optical excitations has therefore been an outstanding goal in quantum photonics. Here, we demonstrate electrically controlled quantum confinement of neutral excitons in a gate-defined monolayer p-i-n diode. A combination of dc Stark shift induced by large in-plane fields and a previously unknown confining mechanism based on repulsive interaction between excitons and free charges ensures tight exciton confinement in the narrow neutral region. Quantization of exciton motion manifests in multiple discrete, spectrally narrow, voltage-dependent optical resonances that emerge below the free exciton resonance. Our measurements reveal several unique physical features of these quantum confined excitons, including an in-plane dipolar character, one-dimensional center-of-mass confinement, and strikingly enhanced exciton size in the presence of magnetic fields. Our method provides an experimental route towards creating scalable arrays of identical single photon sources, which will constitute building blocks of strongly correlated photonic systems. △ Less

Submitted 11 January, 2022; v1 submitted 17 February, 2021; originally announced February 2021.

Phase Transitions in Germanium Telluride Nanoparticle Phase-Change Materials Studied by Time-Resolved X-Ray Diffraction

Authors: Ann-Katrin U. Michel, Felix Donat, Aurelia Siegfried, Olesya Yarema, Hanbing Fang, Maksym Yarema, Vanessa Wood, Christoph R. Müller, David J. Norris

Abstract: Germanium telluride (GeTe), a phase-change material, is known to exhibit four different structural phases: three at room temperature (one amorphous and two crystalline, $α$ and $γ$) and one at high temperature (crystalline $β$). Because transitions between the amorphous and crystalline phases lead to significant changes in material properties (e.g., refractive index and resistivity), GeTe has been… ▽ More Germanium telluride (GeTe), a phase-change material, is known to exhibit four different structural phases: three at room temperature (one amorphous and two crystalline, $α$ and $γ$) and one at high temperature (crystalline $β$). Because transitions between the amorphous and crystalline phases lead to significant changes in material properties (e.g., refractive index and resistivity), GeTe has been investigated as a phase-change material for photonics, thermoelectrics, ferroelectrics, and spintronics. Consequently, the temperature-dependent phase transitions in GeTe have been studied for bulk and thin-film GeTe, both fabricated by sputtering. Colloidal synthesis of nanoparticles offers a more flexible fabrication approach for amorphous and crystalline GeTe. These nanoparticles are known to exhibit size-dependent properties, such as an increased crystallization temperature for the amorphous-to-$α$ transition in sub-10\,nm GeTe particles. The $α$-to-$β$ phase transition is also expected to vary with size, but this effect has not yet been investigated for GeTe. Here, we report time-resolved X-ray diffraction of GeTe nanoparticles with different diameters and from different synthetic protocols. We observe a non-volatile amorphous-to-$α$ transition between 210$^{\circ}$C and 240$^{\circ}$C and a volatile $α$-to-$β$ transition between 370$^{\circ}$C and 420$^{\circ}$C. The latter transition was reversible and repeatable. While the transition temperatures are shifted relative to the values known for bulk GeTe, the nanoparticle-based samples still exhibit the same structural phases reported for sputtered GeTe. Thus, colloidal GeTe maintains the same general phase behavior as bulk GeTe while allowing for more flexible and accessible fabrication. Therefore, nanoparticle-based GeTe films show great potential for applications, such as in active photonics. △ Less

Submitted 20 November, 2020; originally announced November 2020.

The Potential of Combining Thermal Scanning Probes and Phase-Change Materials for Tunable Metasurfaces

Authors: Ann-Katrin U. Michel, Sebastian Meyer, Nicolas Essing, Nolan Lassaline, Carin R. Lightner, Samuel Bisig, David J. Norris, Dmitry N. Chigrin

Abstract: Metasurfaces allow for the spatiotemporal variation of amplitude, phase, and polarization of optical wavefronts. Implementation of active tunability of metasurfaces promises compact flat optics capable of reconfigurable wavefront shaping. Phase-change materials (PCMs), such as germanium telluride or germanium antimony telluride, are a prominent material class enabling reconfigurable metasurfaces d… ▽ More Metasurfaces allow for the spatiotemporal variation of amplitude, phase, and polarization of optical wavefronts. Implementation of active tunability of metasurfaces promises compact flat optics capable of reconfigurable wavefront shaping. Phase-change materials (PCMs), such as germanium telluride or germanium antimony telluride, are a prominent material class enabling reconfigurable metasurfaces due to their large refractive index change upon structural transition. However, commonly employed laser-induced switching of PCMs limits the achievable feature sizes and thus, restricts device miniaturization. Here, we propose thermal scanning-probe-induced local switching of germanium telluride to realize near-infrared metasurfaces with feature sizes far below what is achievable with diffraction-limited optical switching. Our design is based on a planar multilayer stack and does not require fabrication of protruding dielectric or metallic resonators as commonly applied in the literature. Instead, we numerically demonstrate that a broad-band tuning of perfect absorption could be realized by the localized and controlled tip-induced crystallization of the PCM layer. The spectral response of the metasurface is explained using simple resonance mode analysis and numerical simulations. To facilitate experimental realization, we provide a detailed theoretical description of the tip-induced crystallization employing multiphysics simulations to demonstrate the great potential for fabricating compact reconfigurable metasurfaces. Our concept allows for tunable perfect absorption and can be applied not only for thermal imaging or sensing, but also for spatial frequency filtering. △ Less

Submitted 15 July, 2020; originally announced July 2020.

Comments: 7 pages, 4 figures

Benchmarking Coherent Errors in Controlled-Phase Gates due to Spectator Qubits

Authors: S. Krinner, S. Lazar, A. Remm, C. K. Andersen, N. Lacroix, G. J. Norris, C. Hellings, M. Gabureac, C. Eichler, A. Wallraff

Abstract: A major challenge in operating multi-qubit quantum processors is to mitigate multi-qubit coherent errors. For superconducting circuits, besides crosstalk originating from imperfect isolation of control lines, dispersive coupling between qubits is a major source of multi-qubit coherent errors. We benchmark phase errors in a controlled-phase gate due to dispersive coupling of either of the qubits in… ▽ More A major challenge in operating multi-qubit quantum processors is to mitigate multi-qubit coherent errors. For superconducting circuits, besides crosstalk originating from imperfect isolation of control lines, dispersive coupling between qubits is a major source of multi-qubit coherent errors. We benchmark phase errors in a controlled-phase gate due to dispersive coupling of either of the qubits involved in the gate to one or more spectator qubits. We measure the associated gate infidelity using quantum process tomography. In addition, we point out that, due to coupling of the gate qubits to a non-computational state during the gate, two-qubit conditional phase errors are enhanced. Our work is important for understanding limits to the fidelity of two-qubit gates with finite on/off ratio in multi-qubit settings. △ Less

Submitted 12 May, 2020; originally announced May 2020.

Comments: 9 pages, 5 figures

Journal ref: Phys. Rev. Applied 14, 024042 (2020)

Spectrally-resolved dielectric function of amorphous and crystalline GeTe nanoparticle thin films

Authors: Ann-Katrin U. Michel, Marilyne Sousa, Maksym Yarema, Olesya Yarema, Vladimir Ovuka, Nolan Lassaline, Vanessa Wood, David J. Norris

Abstract: Phase-change materials (PCMs), which are well-established in optical and random-access memories, are increasingly studied for emerging topics such as brain-inspired computing and active photonics. These applications take advantage of the pronounced reflectivity and resistivity changes that accompany the structural transition in PCMs from their amorphous to crystalline state. However, PCMs are typi… ▽ More Phase-change materials (PCMs), which are well-established in optical and random-access memories, are increasingly studied for emerging topics such as brain-inspired computing and active photonics. These applications take advantage of the pronounced reflectivity and resistivity changes that accompany the structural transition in PCMs from their amorphous to crystalline state. However, PCMs are typically fabricated as thin films via sputtering, which is costly, requires advanced equipment, and limits the sample and device design. Here, we investigate a simpler and more flexi-ble approach for applications in tunable photonics: the use of sub-10 nm colloidal PCM nanoparticles (NPs). We report the optical properties of amorphous and crystalline germanium telluride (GeTe) NP thin films from the infrared to the ultraviolet spectral range. Using spectroscopic ellipsometry with support from cross-sectional scanning electron microscopy, atomic force microscopy, and absorption spectroscopy, we extract refractive indices n, extinction coefficients k, and band gaps Eg and compare to values known for sputtered GeTe thin films. We find a decrease of n and k and an increase of Eg for NP-based GeTe films, yielding insights into size-dependent property changes for nanoscale PCMs. Furthermore, our results reveal the suitability of GeTe NPs for tunable photonics in the near-infrared and visible spectral range. Finally, we studied sample reproducibility and aging of our NP films. We found that the colloidally-prepared PCM thin films were stable for at least two months stored under nitrogen, further supporting the great promise of these materials in applications. △ Less

Submitted 4 February, 2020; originally announced February 2020.

Comments: Optical Materials Engineering Laboratory, ETH Zurich, 8092 Zurich, Switzerland. IBM Research-Zurich, Rüschlikon, Switzerland. Materials and Device Engineering Group, Department of Information Technology and Electrical Engineering, ETH Zurich, 8092 Zurich, Switzerland

Optical Fourier surfaces

Authors: Nolan Lassaline, Raphael Brechbühler, Sander J. W. Vonk, Korneel Ridderbeek, Martin Spieser, Samuel Bisig, Boris le Feber, Freddy T. Rabouw, David J. Norris

Abstract: Gratings and holograms are patterned surfaces that tailor optical signals by diffraction. Despite their long history, variants with remarkable functionalities continue to be discovered. Further advances could exploit Fourier optics, which specifies the surface pattern that generates a desired diffracted output through its Fourier transform. To shape the optical wavefront, the ideal surface profile… ▽ More Gratings and holograms are patterned surfaces that tailor optical signals by diffraction. Despite their long history, variants with remarkable functionalities continue to be discovered. Further advances could exploit Fourier optics, which specifies the surface pattern that generates a desired diffracted output through its Fourier transform. To shape the optical wavefront, the ideal surface profile should contain a precise sum of sinusoidal waves, each with a well-defined amplitude, spatial frequency, and phase. However, because fabrication techniques typically yield profiles with at most a few depth levels, complex 'wavy' surfaces cannot be obtained, limiting the straightforward mathematical design and implementation of sophisticated diffractive optics. Here we present a simple yet powerful approach to eliminate this design-fabrication mismatch by demonstrating optical surfaces that contain an arbitrary number of specified sinusoids. We combine thermal scanning-probe lithography and templating to create periodic and aperiodic surface patterns with continuous depth control and sub-wavelength spatial resolution. Multicomponent linear gratings allow precise manipulation of electromagnetic signals through Fourier-spectrum engineering. Consequently, we immediately resolve an important problem in photonics by creating a single-layer grating that simultaneously couples red, green, and blue light at the same angle of incidence. More broadly, we analytically design and accurately replicate intricate two-dimensional moiré patterns, quasicrystals, and holograms, demonstrating a variety of previously impossible diffractive surfaces. Therefore, this approach provides instant benefit for optical devices (biosensors, lasers, metasurfaces, and modulators) and emerging topics in photonics (topological structures, transformation optics, and valleytronics). △ Less

Submitted 19 December, 2019; originally announced December 2019.

Three-dimensional enantiomeric recognition of optically trapped single chiral nanoparticles

Authors: Gabriel Schnoering, Lisa V. Poulikakos, Yoseline Rosales-Cabara, Antoine Canaguier-Durand, David J. Norris, Cyriaque Genet

Abstract: We optically trap freestanding single metallic chiral nanoparticles using a standing-wave optical tweezer. We also incorporate within the trap a polarimetric setup that allows to perform in situ chiral recognition of single enantiomers. This is done by measuring the S_3 component of the Stokes vector of a light beam scattered off the trapped nanoparticle in the forward direction. This unique combi… ▽ More We optically trap freestanding single metallic chiral nanoparticles using a standing-wave optical tweezer. We also incorporate within the trap a polarimetric setup that allows to perform in situ chiral recognition of single enantiomers. This is done by measuring the S_3 component of the Stokes vector of a light beam scattered off the trapped nanoparticle in the forward direction. This unique combination of optical trapping and chiral recognition, all implemented within a single setup, opens new perspectives towards the control, recognition, and manipulation of chiral objects at nanometer scales. △ Less

Submitted 27 May, 2018; originally announced May 2018.

Comments: 8 pages, including Supplemental Material, 7 figures

Journal ref: Phys. Rev. Lett. 121, 023902 (2018)

Bright triplet excitons in lead halide perovskites

Authors: Michael A. Becker, Roman Vaxenburg, Georgian Nedelcu, Peter C. Sercel, Andrew Shabaev, Michael J. Mehl, John G. Michopoulos, Samuel G. Lambrakos, Noam Bernstein, John L. Lyons, Thilo Stöferle, Rainer F. Mahrt, Maksym V. Kovalenko, David J. Norris, Gabriele Rainò, Alexander L. Efros

Abstract: Nanostructured semiconductors emit light from electronic states known as excitons[1]. According to Hund's rules[2], the lowest energy exciton in organic materials should be a poorly emitting triplet state. Analogously, the lowest exciton level in all known inorganic semiconductors is believed to be optically inactive. These 'dark' excitons (into which the system can relax) hinder light-emitting de… ▽ More Nanostructured semiconductors emit light from electronic states known as excitons[1]. According to Hund's rules[2], the lowest energy exciton in organic materials should be a poorly emitting triplet state. Analogously, the lowest exciton level in all known inorganic semiconductors is believed to be optically inactive. These 'dark' excitons (into which the system can relax) hinder light-emitting devices based on semiconductor nanostructures. While strategies to diminish their influence have been developed[3-5], no materials have been identified in which the lowest exciton is bright. Here we show that the lowest exciton in quasi-cubic lead halide perovskites is optically active. We first use the effective-mass model and group theory to explore this possibility, which can occur when the strong spin-orbit coupling in the perovskite conduction band is combined with the Rashba effect [6-10]. We then apply our model to CsPbX3 (X=Cl,Br,I) nanocrystals[11], for which we measure size- and composition-dependent fluorescence at the single-nanocrystal level. The bright character of the lowest exciton immediately explains the anomalous photon-emission rates of these materials, which emit 20 and 1,000 times faster[12] than any other semiconductor nanocrystal at room[13-16] and cryogenic[17] temperatures, respectively. The bright exciton is further confirmed by detailed analysis of the fine structure in low-temperature fluorescence spectra. For semiconductor nanocrystals[18], which are already used in lighting[19,20], lasers[21,22], and displays[23], these optically active excitons can lead to materials with brighter emission and enhanced absorption. More generally, our results provide criteria for identifying other semiconductors exhibiting bright excitons with potentially broad implications for optoelectronic devices. △ Less

Submitted 10 July, 2017; originally announced July 2017.

Comments: 14 pages and 3 figures in the main text, Methods and extended data 16 pages which include 11 figures, and supporting information 28 pages

Journal ref: Nature 553, 189 (2018)

Colloidal-quantum-dot spasers and plasmonic amplifiers

Authors: Stephan J. P. Kress, Jian Cui, Patrik Rohner, David K. Kim, Felipe V. Antolinez, Karl-Augustin Zaininger, Sriharsha V. Jayanti, Patrizia Richner, Kevin M. McPeak, Dimos Poulikakos, David J. Norris

Abstract: Colloidal quantum dots are robust, efficient, and tunable emitters now used in lighting, displays, and lasers. Consequently, when the spaser, a laser-like source of surface plasmons, was first proposed, quantum dots were specified as the ideal plasmonic gain medium. Subsequent spaser designs, however, have required a single material to simultaneously provide gain and define the plasmonic cavity, a… ▽ More Colloidal quantum dots are robust, efficient, and tunable emitters now used in lighting, displays, and lasers. Consequently, when the spaser, a laser-like source of surface plasmons, was first proposed, quantum dots were specified as the ideal plasmonic gain medium. Subsequent spaser designs, however, have required a single material to simultaneously provide gain and define the plasmonic cavity, an approach ill-suited to quantum dots and other colloidal nanomaterials. Here we develop a more open architecture that decouples the gain medium from the cavity, leading to a versatile class of quantum-dot-based spasers that allow controlled generation, extraction, and manipulation of plasmons. We first create high-quality-factor, aberration-corrected, Ag plasmonic cavities. We then incorporate quantum dots via electrohydrodynamic printing18,19 or drop-casting. Photoexcitation under ambient conditions generates monochromatic plasmons above threshold. This signal is extracted, directed through an integrated amplifier, and focused at a nearby nanoscale tip, generating intense electromagnetic fields. This spaser platform, deployable at different wavelengths, size scales, and geometries, can enable more complex on-chip plasmonic devices. △ Less

Submitted 29 November, 2016; originally announced November 2016.

Direct Patterning of Colloidal Quantum-Dot Thin Films for Enhanced and Spectrally Selective Out-Coupling of Emission

Authors: Ferry Prins, David K. Kim, Jian Cui, Eva De Leo, Kevin M. McPeak, David J. Norris

Abstract: We report on a template-stripping method for the direct surface patterning of colloidal quantum-dot thin films to produce highly luminescent structures with feature sizes less than 100 nm. Through the careful design of high quality bulls-eye gratings we can produce strong directional beaming (10° divergence) with up to six-fold out-coupling enhancement of spontaneous emission in the surface-normal… ▽ More We report on a template-stripping method for the direct surface patterning of colloidal quantum-dot thin films to produce highly luminescent structures with feature sizes less than 100 nm. Through the careful design of high quality bulls-eye gratings we can produce strong directional beaming (10° divergence) with up to six-fold out-coupling enhancement of spontaneous emission in the surface-normal direction. A transition to narrow single-mode lasing is observed in these same structures at thresholds as low as 120 μJ/cm2. Furthermore, making use of the size-tunable character of colloidal quantum dots, we demonstrate spectrally selective out-coupling of light from mixed quantum-dot films. Our results provide a straightforward route towards significantly improved optical properties of colloidal quantum-dot assemblies. △ Less

Submitted 10 October, 2016; originally announced October 2016.

Comments: preprint, 32 pages, 7 figures

Full-Spectrum Flexible Color Printing at the Diffraction Limit

Authors: Patrizia Richner, Patrick Galliker, Tobias Lendenmann, Stephan J. P. Kress, David K. Kim, David J. Norris, Dimos Poulikakos

Abstract: Color printing at the diffraction limit has been recently explored by fabricating nanoscale plasmonic structures with electron beam lithography. However, only a limited color range and constant intensity throughout the structure have been demonstrated. Here we show an alternative, facile approach relying on the direct, open-atmosphere electrohydrodynamic rapid nanodrip printing of controlled amoun… ▽ More Color printing at the diffraction limit has been recently explored by fabricating nanoscale plasmonic structures with electron beam lithography. However, only a limited color range and constant intensity throughout the structure have been demonstrated. Here we show an alternative, facile approach relying on the direct, open-atmosphere electrohydrodynamic rapid nanodrip printing of controlled amounts of red, green and blue (RGB) quantum dots at a resolution of 250 nm. The narrow emission spectrum of the dots allows the coverage of a very broad color space, exceeding standard RGB (sRGB) of modern display devices. We print color gradients of variable intensity, which to date could not be achieved with diffraction-limited resolution. Showcasing the capabilities of the technology, we present a photo-realistic printed image of a colorful parrot with a pixel size of 250 nm. △ Less

Submitted 25 September, 2016; originally announced September 2016.

Charge Effects and Nanoparticle Pattern Formation in Electrohydrodynamic NanoDrip Printing of Colloids

Authors: Patrizia Richner, Stephan J. P. Kress, David J. Norris, Dimos Poulikakos

Abstract: Advancing open atmosphere printing technologies to produce features in the nanoscale range has important and broad applications ranging from electronics, to photonics, plasmonics and biology. Recently an electrohydrodynamic printing regime has been demonstrated in a rapid dripping mode (termed NanoDrip), where the ejected colloidal droplets from nozzles of diameters of O(1 μm) can controllably rea… ▽ More Advancing open atmosphere printing technologies to produce features in the nanoscale range has important and broad applications ranging from electronics, to photonics, plasmonics and biology. Recently an electrohydrodynamic printing regime has been demonstrated in a rapid dripping mode (termed NanoDrip), where the ejected colloidal droplets from nozzles of diameters of O(1 μm) can controllably reach sizes an order of magnitude smaller than the nozzle and can generate planar and out-of-plane structures of similar sizes. Despite demonstrated capabilities, our fundamental understanding of important aspects of the physics of NanoDrip printing needs further improvement. Here we address the topics of charge content and transport in NanoDrip printing. We employ quantum dot and gold nanoparticle dispersions in combination with a specially designed, auxiliary, asymmetric electric field, targeting the understanding of charge locality (particles vs. solvent) and particle distribution in the deposits as indicated by the dried nanoparticle patterns (footprints) on the substrate. We show that droplets of alternating charge can be spatially separated when applying an ac field to the nozzle. The nanoparticles within a droplet are distributed asymmetrically under the influence of the auxiliary lateral electric field, indicating that they are the main carriers. We also show that the ligand length of the nanoparticles in the colloid affects their mobility after deposition (in the sessile droplet state). △ Less

Submitted 25 September, 2016; originally announced September 2016.

How semiconductor nanoplatelets form

Authors: Andreas Riedinger, Florian D. Ott, Aniket Mule, Sergio Mazzotti, Philippe N. Knuesel, Stephan J. P. Kress, Ferry Prins, Steven C. Erwin, David J. Norris

Abstract: Colloidal nanoplatelets - quasi-two-dimensional sheets of semiconductor exhibiting efficient, spectrally pure fluorescence - form when liquid-phase syntheses of spherical quantum dots are modified. Despite intense interest in their properties, the mechanism behind their anisotropic shape and precise atomic-scale thickness remains unclear, and even counterintuitive when their crystal structure is i… ▽ More Colloidal nanoplatelets - quasi-two-dimensional sheets of semiconductor exhibiting efficient, spectrally pure fluorescence - form when liquid-phase syntheses of spherical quantum dots are modified. Despite intense interest in their properties, the mechanism behind their anisotropic shape and precise atomic-scale thickness remains unclear, and even counterintuitive when their crystal structure is isotropic. One commonly accepted explanation is that nanoclusters nucleate within molecular templates and then fuse. Here, we test this mechanism for zincblende nanoplatelets and show that they form instead due to an intrinsic instability in growth kinetics. We synthesize CdSe and CdS1-xSex nanoplatelets in template- and solvent-free isotropic melts containing only cadmium carboxylate and chalcogen, a finding incompatible with previous explanations. Our model, based on theoretical results showing enhanced growth on narrow surface facets, rationalizes nanoplatelet formation and experimental dependencies on temperature, time, and carboxylate length. Such understanding should lead to improved syntheses, controlled growth on surfaces, and broader libraries of nanoplatelet materials. △ Less

Submitted 22 September, 2016; v1 submitted 20 May, 2016; originally announced May 2016.

Comments: 57 pages, 23 figures (main text and supporting information merged), submitted

Plasmonic Films Can Easily Be Better: Rules and Recipes

Authors: Kevin M. McPeak, Sriharsha V. Jayanti, Stephan J. P. Kress, Stefan Meyer, Stelio Iotti, Aurelio Rossinelli, David J. Norris

Abstract: High-quality materials are critical for advances in plasmonics, especially as researchers now investigate quantum effects at the limit of single surface plasmons or exploit ultraviolet- or CMOS-compatible metals such as aluminum or copper. Unfortunately, due to inexperience with deposition methods, many plasmonics researchers deposit metals under the wrong conditions, severely limiting performance… ▽ More High-quality materials are critical for advances in plasmonics, especially as researchers now investigate quantum effects at the limit of single surface plasmons or exploit ultraviolet- or CMOS-compatible metals such as aluminum or copper. Unfortunately, due to inexperience with deposition methods, many plasmonics researchers deposit metals under the wrong conditions, severely limiting performance unnecessarily. This is then compounded as others follow their published procedures. In this perspective, we describe simple rules collected from the surface-science literature that allow high-quality plasmonic films of aluminum, copper, gold, and silver to be easily deposited with commonly available equipment (a thermal evaporator). Recipes are also provided so that films with optimal optical properties can be routinely obtained. △ Less

Submitted 7 March, 2016; originally announced March 2016.

Comments: Optical Materials Engineering Laboratory, ETH Zurich, 8092 Zurich, Switzerland

Journal ref: ACS Photonics, 2015, 2 (3), pp 326-333

A damage model for fracking

Authors: J. Quinn Norris, Donald L. Turcotte, John B. Rundle

Abstract: Injections of large volumes of water into tight shale reservoirs allows the extraction of oil and gas not previously accessible. This large volume "super" fracking induces damage that allows the oil and/or gas to flow to an extraction well. The purpose of this paper is to provide a model for understanding super fracking. We assume that water is injected from a small spherical cavity into a homogen… ▽ More Injections of large volumes of water into tight shale reservoirs allows the extraction of oil and gas not previously accessible. This large volume "super" fracking induces damage that allows the oil and/or gas to flow to an extraction well. The purpose of this paper is to provide a model for understanding super fracking. We assume that water is injected from a small spherical cavity into a homogeneous elastic medium. The high pressure of the injected water generates hoop stresses that reactivate natural fractures in the tight shales. These fractures migrate outward as water is added creating a spherical shell of damaged rock. The porosity associated with these fractures is equal to the water volume injected. We obtain an analytic expression for this volume. We apply our model to a typical tight shale reservoir and show that the predicted water volumes are in good agreement with the volumes used in super fracking. △ Less

Submitted 5 March, 2015; originally announced March 2015.

Comments: 17 pages, 4 figures in International Journal of Damage Mechanics

Microscopic Theory of Cation Exchange in CdSe Nanocrystals

Authors: Florian D. Ott, Leo L. Spiegel, David J. Norris, Steven C. Erwin

Abstract: Although poorly understood, cation-exchange reactions are increasingly used to dope or transform colloidal semiconductor nanocrystals (quantum dots). We used density-functional theory and kinetic Monte Carlo simulations to develop a microscopic theory that explains structural, optical, and electronic changes observed experimentally in Ag-cation-exchanged CdSe nanocrystals. We find that Coulomb int… ▽ More Although poorly understood, cation-exchange reactions are increasingly used to dope or transform colloidal semiconductor nanocrystals (quantum dots). We used density-functional theory and kinetic Monte Carlo simulations to develop a microscopic theory that explains structural, optical, and electronic changes observed experimentally in Ag-cation-exchanged CdSe nanocrystals. We find that Coulomb interactions, both between ionized impurities and with the polarized nanocrystal surface, play a key role in cation exchange. Our theory also resolves several experimental puzzles related to photoluminescence and electrical behavior in CdSe nanocrystals doped with Ag. △ Less

Submitted 15 October, 2014; v1 submitted 16 September, 2014; originally announced September 2014.

Comments: 12 pages, 4 figures. Published in Physical Review Letters. Supplementary information is included as ancillary file. The movie can be downloaded from http://journals.aps.org/prl/abstract/10.1103/PhysRevLett.113.156803

Journal ref: Physical Review Letters 113, 156803 (2014)

Optimising a Muon Spectrometer for Measurements at the ISIS Pulsed Muon Source

Authors: S. R. Giblin, S. P. Cottrell, P. J. C. King, S. Tomlinson, S. J. S. Jago, L. J. Randall, M. J. Roberts, J. Norris, S. Howarth, Q. B. Mutamba, N. J. Rhodes, F. Akeroyd

Abstract: This work describes the development of a state-of-the-art muon spectrometer for the ISIS pulsed muon source. Conceived as a major upgrade of the highly successful EMU instrument, emphasis has been placed on making effective use of the enhanced flux now available at the ISIS source. This has been achieved both through the development of a highly segmented detector array and enhanced data acquisitio… ▽ More This work describes the development of a state-of-the-art muon spectrometer for the ISIS pulsed muon source. Conceived as a major upgrade of the highly successful EMU instrument, emphasis has been placed on making effective use of the enhanced flux now available at the ISIS source. This has been achieved both through the development of a highly segmented detector array and enhanced data acquisition electronics. The pulsed nature of the ISIS beam is particularly suited to the development of novel experiments involving external stimuli, and therefore the ability to sequence external equipment has been added to the acquisition system. Finally, the opportunity has also been taken to improve both the magnetic field and temperature range provided by the spectrometer, to better equip the instrument for running the future ISIS user programme. △ Less

Submitted 17 April, 2014; originally announced April 2014.

Journal ref: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Volume 751, 1 July 2014, Pages 70-78

Comment on "Self-Purification in Semiconductor Nanocrystals"

Authors: M. -H. Du, S. C. Erwin, Al. L. Efros, D. J. Norris

Abstract: In a recent Letter [PRL 96, 226802 (2006)], Dalpian and Chelikowsky claimed that formation energies of Mn impurities in CdSe nanocrystals increase as the size of the nanocrystal decreases, and argued that this size dependence leads to "self-purification" of small nanocrystals. They presented density-functional-theory (DFT) calculations showing a strong size dependence for Mn impurity formation e… ▽ More In a recent Letter [PRL 96, 226802 (2006)], Dalpian and Chelikowsky claimed that formation energies of Mn impurities in CdSe nanocrystals increase as the size of the nanocrystal decreases, and argued that this size dependence leads to "self-purification" of small nanocrystals. They presented density-functional-theory (DFT) calculations showing a strong size dependence for Mn impurity formation energies, and proposed a general explanation. In this Comment we show that several different DFT codes, pseudopotentials, and exchange-correlation functionals give a markedly different result: We find no such size dependence. More generally, we argue that formation energies are not relevant to substitutional doping in most colloidally grown nanocrystals. △ Less

Submitted 2 May, 2008; originally announced May 2008.

Comments: 1 page, 1 figure

Journal ref: Phys. Rev. Lett. 100, 179702 (2008)

Elimination of cracks in self-assembled photonic band gap crystals

Authors: A. A. Chabanov, Y. Jun, D. J. Norris

Abstract: Thin colloidal crystals (or synthetic opals) composed of Stober silica spheres typically develop cracks when they are utilized to obtain photonic band gap crystals (or inverted opals). We find that by sintering the silica spheres prior to assembly of the opal these cracks can be avoided. We report the effects of temperature and duration of the heat treatment on 850 nm silica spheres using electr… ▽ More Thin colloidal crystals (or synthetic opals) composed of Stober silica spheres typically develop cracks when they are utilized to obtain photonic band gap crystals (or inverted opals). We find that by sintering the silica spheres prior to assembly of the opal these cracks can be avoided. We report the effects of temperature and duration of the heat treatment on 850 nm silica spheres using electron microscopy, thermogravimetry, and light scattering. We also find a large dependence of the refractive index of the silica on the temperature of the heat treatment. This may allow tuning of the refractive index of silica spheres. △ Less

Submitted 16 December, 2003; originally announced December 2003.

Comments: REvTex: 4 pages, 3 figures

Journal ref: Appl. Phys. Lett. 84, 3573 (2004).