-
Lane formation in gravitationally driven colloid mixtures consisting of up to three different particle sizes
Authors:
Kay Hofmann,
Marc Isele,
Artur Erbe,
Paul Leiderer,
Peter Nielaba
Abstract:
Brownian dynamics simulations are utilized to study segregation phenomena far from thermodynamic equilibrium. In the present study, we expand upon the analysis of binary colloid mixtures and additionally introduce a third particle species to further our understanding of colloidal systems. Gravitationally driven, spherical colloids immersed in an implicit solvent are confined in two-dimensional lin…
▽ More
Brownian dynamics simulations are utilized to study segregation phenomena far from thermodynamic equilibrium. In the present study, we expand upon the analysis of binary colloid mixtures and additionally introduce a third particle species to further our understanding of colloidal systems. Gravitationally driven, spherical colloids immersed in an implicit solvent are confined in two-dimensional linear microchannels. The interaction between the colloids is modeled by the Weeks-Chandler-Andersen potential, and the confinement of the colloids is realized by hard walls based on the solution of the Smoluchowski equation in half space. In binary and ternary colloidal systems, a difference in the driving force is achieved by differing colloid sizes, but fixed mass density. We observe for both the binary and ternary systems that a driving force difference induces a nonequilibrium phase transition to lanes. For ternary systems, we study the tendency of lane formation in dependence of the diameter of the medium-sized colloids. Here, we find a sweetspot for lane formation in ternary systems. Furthermore, we study the interaction of two differently sized colloids at the channel walls. Recently, we observed that driven large colloids push smaller colloids to the walls. This results in small particle lanes at the walls at early simulation times. In this work, we additionally find that thin lanes are unstable and dissolve over very long time frames. Furthermore, we observe a connection between lane formation and the nonuniform distribution of particles along the channel length. This nonuniform distribution occurs either alongside lane formation or in shared lanes (i.e. lanes consisting of two colloid types).
△ Less
Submitted 10 January, 2024;
originally announced January 2024.
-
Determination of the nearest-neighbor interaction in VO$_2$ via fractal dimension analysis
Authors:
Jacob Holder,
Daniel Kazenwadel,
Peter Nielaba,
Peter Baum
Abstract:
The Ising model is one of the simplest and most well-established concepts to simulate phase transformations in complex materials. However, its most central constant, the interaction strength J between two nearest neighbors, is hard to obtain. Here we show how this basic constant can be determined with a fractal dimension analysis of measured domain structures. We apply this approach to vanadium di…
▽ More
The Ising model is one of the simplest and most well-established concepts to simulate phase transformations in complex materials. However, its most central constant, the interaction strength J between two nearest neighbors, is hard to obtain. Here we show how this basic constant can be determined with a fractal dimension analysis of measured domain structures. We apply this approach to vanadium dioxide, a strongly correlated material with a first-order insulator-to-metal phase-transition with enigmatic properties. We obtain a nearest-neighbor interaction of 13.8 meV, a value close to the thermal energy at room temperature. Consequently, even far below the transition temperature, there are spontaneous local phase-flips from the insulating into the metallic phase. These fluctuations explain several measured anomalies in VO$_2$, in particular the low thermal carrier activation energy and the finite conductivity of the insulating phase. As a method, our fractal dimension analysis links the Ising model to macroscopic material constants for almost any first-order phase transition.
△ Less
Submitted 17 November, 2023; v1 submitted 16 June, 2023;
originally announced June 2023.
-
Simulating bistable current-induced switching of metallic atomic contacts by electron-vibration scattering
Authors:
Markus Ring,
Fabian Pauly,
Peter Nielaba,
Elke Scheer
Abstract:
We present a microscopic model, describing current-driven switching in metallic atomic-size contacts. Applying a high current through an atomic-size contact, creates a strong electronic nonequilibrium that excites vibrational modes by virtue of the electron-vibration coupling. Using density functional theory (DFT) in combination with the Landauer-Büttiker theory for phase-coherent transport, expre…
▽ More
We present a microscopic model, describing current-driven switching in metallic atomic-size contacts. Applying a high current through an atomic-size contact, creates a strong electronic nonequilibrium that excites vibrational modes by virtue of the electron-vibration coupling. Using density functional theory (DFT) in combination with the Landauer-Büttiker theory for phase-coherent transport, expressed in terms of nonequilibrium Green's functions (NEGFs), we study the current-induced forces arising from this nonequilibrium and determine those vibrational modes which couple most strongly to the electronic system. For single-atom lead (Pb) contacts we show specific candidates for bistable switches, consisting of two similar atomic configurations with differing electric conductance. We identify vibrational modes that induce a transition between these configurations. Our results reveal a possible origin of bistable switching in atomic-size contacts through excitation of vibrations by inelastic electron scattering and underline the power of the combined DFT-NEGF approach and statistical mechanics analysis of a Langevin equation to overcome the time-scale gap between atomic motion and rare switching events, allowing for an efficient exploration of the contacts' configurational phase space.
△ Less
Submitted 6 March, 2023;
originally announced March 2023.
-
Phononic heat conductance of gold atomic contacts: Coherent versus incoherent transport
Authors:
Fabian Müller,
Peter Nielaba,
Juan Carlos Cuevas,
Fabian Pauly
Abstract:
We present here a theoretical method to determine the phononic contribution to the thermal conductance of nanoscale systems in the phase-coherent regime. Our approach makes use of classical molecular dynamics (MD) simulations to calculate the temperature-dependent dynamical matrix, and the phononic heat conductance is subsequently computed within the Landauer-Büttiker formalism with the help of no…
▽ More
We present here a theoretical method to determine the phononic contribution to the thermal conductance of nanoscale systems in the phase-coherent regime. Our approach makes use of classical molecular dynamics (MD) simulations to calculate the temperature-dependent dynamical matrix, and the phononic heat conductance is subsequently computed within the Landauer-Büttiker formalism with the help of nonequilibrium Green's function techniques. Tailored to nanostructures, crucial steps of force constant and heat transport calculations are performed directly in real space. As compared to conventional density functional theory (DFT) approaches, the advantage of our method is two-fold. First, interatomic interactions can be described with the method of choice. Semiempirical potentials may lead to large computational speedups, enabling the study of much larger systems. Second, the method naturally takes into account the temperature dependence of atomic force constants, an aspect that is ignored in typical static DFT-based calculations. We illustrate our method by analyzing the temperature dependence of the phononic thermal conductance of gold (Au) chains with lengths ranging from 1 to 12 atoms. Moreover, in order to evaluate the importance of anharmonic effects in these atomic-scale wires, we compare the phase-coherent approach with nonequilibrium MD (NEMD) simulations. We find that the predictions of the phase-coherent method and the classical NEMD approach largely agree above the Debye temperature for all studied chain lengths, which shows that heat transport is coherent and that our phase-coherent approach is well suited for such nanostructures.
△ Less
Submitted 8 November, 2022; v1 submitted 19 August, 2022;
originally announced August 2022.
-
Statistical analysis of electronic and phononic transport simulations of metallic atomic contacts
Authors:
D. O. Möhrle,
F. Müller,
M. Matt,
P. Nielaba,
F. Pauly
Abstract:
We adapt existing phonon heat transport methods to compute the phononic thermal conductance of metallic atomic contacts during a stretching process. Nonequilibrium molecular dynamics (NEMD) simulations are used to generate atomic configurations and to simultaneously determine the phononic thermal conductance. Combining the approach with established electronic structure calculations based on a tigh…
▽ More
We adapt existing phonon heat transport methods to compute the phononic thermal conductance of metallic atomic contacts during a stretching process. Nonequilibrium molecular dynamics (NEMD) simulations are used to generate atomic configurations and to simultaneously determine the phononic thermal conductance. Combining the approach with established electronic structure calculations based on a tight-binding parameterization allows us to calculate in addition charge transport properties of each contact geometry within the Landauer-Büttiker formalism. The method is computationally fast enough to perform a statistical analysis of many stretching events, and we apply it here to atomic junctions formed from three different metals, namely gold (Au), platinum (Pt) and aluminum (Al). The description of both phononic and electronic contributions to heat transport allows us to examine the validity of the Wiedemann-Franz law at the atomic scale. We find that it is well obeyed in the contact regime at room temperature for Au and Al as far as only electronic contributions are concerned, but deviations of up to 10% arise for Pt. If the total thermal conductance is studied, deviations of typically less than 10% arise for Au and Al, which can be traced back mainly to phononic contributions to the thermal conductance, while electronic and phononic contributions can add up to some 20% for single-atom contacts of Pt.
△ Less
Submitted 7 October, 2019; v1 submitted 19 July, 2019;
originally announced July 2019.
-
Thermal conductance of metallic atomic-size contacts: Phonon transport and Wiedemann-Franz law
Authors:
J. C. Klöckner,
M. Matt,
P. Nielaba,
F. Pauly,
J. C. Cuevas
Abstract:
Motivated by recent experiments [Science 355, 6330 (2017); Nat. Nanotechnol. 12, 430 (2017)], we present here an extensive theoretical analysis of the thermal conductance of atomic-size contacts made of three different metals, namely gold (Au), platinum (Pt) and aluminum (Al).
Motivated by recent experiments [Science 355, 6330 (2017); Nat. Nanotechnol. 12, 430 (2017)], we present here an extensive theoretical analysis of the thermal conductance of atomic-size contacts made of three different metals, namely gold (Au), platinum (Pt) and aluminum (Al).
△ Less
Submitted 5 November, 2017; v1 submitted 1 September, 2017;
originally announced September 2017.
-
The nature of the electrical conduction in ferromagnetic atomic-size contacts: insights from shot noise measurements and theoretical simulations
Authors:
Ran Vardimon,
Manuel Matt,
Peter Nielaba,
Juan Carlos Cuevas,
Oren Tal
Abstract:
With the goal to elucidate the nature of spin-dependent electronic transport in ferromagnetic atomic contacts, we present here a combined experimental and theoretical study of the conductance and shot noise of metallic atomic contacts made of the 3d ferromagnetic materials Fe, Co, and Ni. For comparison, we also present the corresponding results for the noble metal Cu. Conductance and shot noise m…
▽ More
With the goal to elucidate the nature of spin-dependent electronic transport in ferromagnetic atomic contacts, we present here a combined experimental and theoretical study of the conductance and shot noise of metallic atomic contacts made of the 3d ferromagnetic materials Fe, Co, and Ni. For comparison, we also present the corresponding results for the noble metal Cu. Conductance and shot noise measurements, performed using a low-temperature break junction setup, show that in these ferromagnetic nanowires: (i) there is no conductance quantization of any kind, (ii) transport is dominated by several partially-open conduction channels, even in the case of single-atom contacts, and (iii) the Fano factor of large contacts saturates to values that clearly differs from those of monovalent (nonmagnetic) metals. We rationalize these observations with the help of a theoretical approach that combines molecular dynamics simulations to describe the junction formation with nonequilibrium Green's function techniques to compute the transport properties within the Landauer-Buettiker framework. Our theoretical approach successfully reproduces all the basic experimental results and it shows that all the observations can be traced back to the fact that the d bands of the minority-spin electrons play a fundamental role in the transport through ferromagnetic atomic-size contacts. These d bands give rise to partially open conduction channels for any contact size, which in turn lead naturally to the different observations described above. Thus, the transport picture for these nanoscale ferromagnetic wires that emerges from the ensemble of our results is clearly at variance with the well established conduction mechanism that governs the transport in macroscopic ferromagnetic wires, where the d bands are responsible for the magnetism but do not take part in the charge flow.
△ Less
Submitted 8 December, 2015;
originally announced December 2015.
-
Shot noise variation within ensembles of gold atomic break junctions at room temperature
Authors:
Ruoyu Chen,
Manuel Matt,
Fabian Pauly,
Peter Nielaba,
Juan Carlos Cuevas,
Douglas Natelson
Abstract:
Atomic-scale junctions are a powerful tool to study quantum transport, and are frequently examined through the mechanically controllable break junction technique (MCBJ). The junction-to-junction variation of atomic configurations often leads to a statistical approach, with ensemble-averaged properties providing access to the relevant physics. However, the full ensemble contains considerable additi…
▽ More
Atomic-scale junctions are a powerful tool to study quantum transport, and are frequently examined through the mechanically controllable break junction technique (MCBJ). The junction-to-junction variation of atomic configurations often leads to a statistical approach, with ensemble-averaged properties providing access to the relevant physics. However, the full ensemble contains considerable additional information. We report a new analysis of shot noise over entire ensembles of junction configurations using scanning tunneling microscope (STM)-style gold break junctions at room temperature in ambient conditions, and compare this data with simulations based on molecular dynamics (MD), a sophisticated tight-binding model, and nonequilibrium Green's functions. The experimental data show a suppression in the variation of the noise near conductances dominated by fully transmitting channels, and a surprising participation of multiple channels in the nominal tunneling regime. Comparison with the simulations, which agree well with published work at low temperatures and ultrahigh vacuum (UHV) conditions, suggests that these effects likely result from surface contamination and disorder in the electrodes. We propose additional experiments that can distinguish the relative contributions of these factors.
△ Less
Submitted 9 June, 2014;
originally announced June 2014.
-
Membrane-mediated protein-protein interaction: A Monte Carlo study
Authors:
Joerg Neder,
Beate West,
Peter Nielaba,
Friederike Schmid
Abstract:
We investigate membrane-mediated interactions between transmembrane proteins using coarse-grained models. We compare the effective potential of mean force (PMF) between two proteins, which are always aligned parallel to the z-axis of the simulation box, with those PMFs obtained for proteins with fluctuating orientations. The PMFs are dominated by an oscillatory packing-driven contribution and a sm…
▽ More
We investigate membrane-mediated interactions between transmembrane proteins using coarse-grained models. We compare the effective potential of mean force (PMF) between two proteins, which are always aligned parallel to the z-axis of the simulation box, with those PMFs obtained for proteins with fluctuating orientations. The PMFs are dominated by an oscillatory packing-driven contribution and a smooth attractive hydrophobic mismatch contribution, which vanishes if the hydrophobic length of the protein matches the thickness of the membrane. If protein orientations are allowed to fluctuate, the oscillations are greatly reduced compared to proteins with fixed orientation. Furthermore, the hydrophobic mismatch interaction has a smaller range. Finally, we compare the two-dimensional thickness profiles around two proteins with the predictions from the elastic theory of two coupled monolayers, and find them to be in very good agreement.
△ Less
Submitted 10 April, 2012;
originally announced April 2012.
-
Simulation of the shape memory effect in a NiTi nano model system
Authors:
Daniel Mutter,
Peter Nielaba
Abstract:
The shape memory behavior of a NiTi nanoparticle is analyzed by molecular dynamics simulations. After a detailed description of the equilibrium structures of the used model potential, the multi variant martensitic ground state, which depends on the geometry of the particle, is discussed. Tensile load is applied, changing the variant configuration to a single domain state with a remanent strain aft…
▽ More
The shape memory behavior of a NiTi nanoparticle is analyzed by molecular dynamics simulations. After a detailed description of the equilibrium structures of the used model potential, the multi variant martensitic ground state, which depends on the geometry of the particle, is discussed. Tensile load is applied, changing the variant configuration to a single domain state with a remanent strain after unloading. Heating the particle leads to a shape memory effect without a phase transition to the austenite, but by variant reorientation and twin boundary formation at a certain temperature. These processes are described by stress-strain and strain-temperature curves, together with a visualization of the microstructure of the nanoparticle. Results are presented for five different Ni concentrations in the vicinity of 50%, showing for example, that small deviations from this ideal composition can influence the critical temperature for shape recovery significantly.
△ Less
Submitted 6 February, 2012;
originally announced February 2012.
-
Simulation of the thermally induced austenitic phase transition in NiTi nanoparticles
Authors:
Daniel Mutter,
Peter Nielaba
Abstract:
The reverse martensitic ("austenitic") transformation upon heating of equiatomic nickel-titanium nanoparticles with diameters between 4 and 17 nm is analyzed by means of molecular-dynamics simulations with a semi-empirical model potential. After constructing an appropriate order parameter to distinguish locally between the monoclinic B19' at low and the cubic B2 structure at high temperatures, the…
▽ More
The reverse martensitic ("austenitic") transformation upon heating of equiatomic nickel-titanium nanoparticles with diameters between 4 and 17 nm is analyzed by means of molecular-dynamics simulations with a semi-empirical model potential. After constructing an appropriate order parameter to distinguish locally between the monoclinic B19' at low and the cubic B2 structure at high temperatures, the process of the phase transition is visualized. This shows a heterogeneous nucleation of austenite at the surface of the particles, which propagates to the interior by plane sliding, explaining a difference in austenite start and end temperatures. Their absolute values and dependence on particle diameter are obtained and related to calculations of the surface induced size dependence of the difference in free energy between austenite and martensite.
△ Less
Submitted 11 October, 2011;
originally announced October 2011.
-
Molecular dynamics study of the thermopower of Ag, Au, and Pt nanocontacts
Authors:
F. Pauly,
J. K. Viljas,
M. Bürkle,
M. Dreher,
P. Nielaba,
J. C. Cuevas
Abstract:
Using molecular dynamics simulations of many junction stretching processes we analyze the thermopower of silver (Ag), gold (Au), and platinum (Pt) atomic contacts. In all cases we observe that the thermopower vanishes on average within the standard deviation and that its fluctuations increase for decreasing minimum cross-section of the junctions. However, we find a suppression of the fluctuations…
▽ More
Using molecular dynamics simulations of many junction stretching processes we analyze the thermopower of silver (Ag), gold (Au), and platinum (Pt) atomic contacts. In all cases we observe that the thermopower vanishes on average within the standard deviation and that its fluctuations increase for decreasing minimum cross-section of the junctions. However, we find a suppression of the fluctuations of the thermopower for the s-valent metals Ag and Au, when the conductance originates from a single, perfectly transmitting channel. Essential features of the experimental results for Au, Ag, and copper (Cu) of Ludoph and van Ruitenbeek [Phys. Rev. B 59, 12290 (1999)], as yet unaddressed by atomistic studies, can hence be explained by considering the atomic and electronic structure at the disordered narrowest constriction of the contacts. For the multivalent metal Pt our calculations predict the fluctuations of the thermopower to be larger by one order of magnitude as compared to Ag and Au, and suppressions of the fluctuations as a function of the conductance are absent.
△ Less
Submitted 7 July, 2011;
originally announced July 2011.
-
Simulation of structural phase transitions in NiTi
Authors:
Daniel Mutter,
Peter Nielaba
Abstract:
By means of molecular-dynamics simulations, temperature driven diffusionless structural phase transitions in equi- and nearly equiatomic ordered nickel-titanium alloys were investigated. For this purpose, a model potential from the literature was adopted [W.S. Lai and B.X. Liu, J. Phys. Condens. Matter 12, L53 (2000)], which is based on the tight-binding model in second moment approximation. The m…
▽ More
By means of molecular-dynamics simulations, temperature driven diffusionless structural phase transitions in equi- and nearly equiatomic ordered nickel-titanium alloys were investigated. For this purpose, a model potential from the literature was adopted [W.S. Lai and B.X. Liu, J. Phys. Condens. Matter 12, L53 (2000)], which is based on the tight-binding model in second moment approximation. The model predicts a stable B19' phase at low temperatures and a nearly cubic B2 phase at high temperatures. After an analysis of crystallography and energetics of the emerging structures, the experimentally known strong dependence of transition temperatures on composition is confirmed and related to lattice instability. Free energy calculations finally give insight into the driving forces of the phase transitions, and reveal free energy barriers inhibiting them below the transition temperatures.
△ Less
Submitted 18 November, 2010;
originally announced November 2010.
-
Coarse-graining microscopic strains in a harmonic, two-dimensional solid and its implications for elasticity: non-local susceptibilities and non-affine noise
Authors:
K. Franzrahe,
P. Nielaba,
S. Sengupta
Abstract:
In soft matter systems the local displacement field can be accessed directly by video microscopy enabling one to compute local strain fields and hence the elastic moduli using a coarse-graining procedure. We study this process for a simple triangular lattice of particles connected by harmonic springs in two-dimensions. Coarse-graining local strains obtained from particle configurations in a Mont…
▽ More
In soft matter systems the local displacement field can be accessed directly by video microscopy enabling one to compute local strain fields and hence the elastic moduli using a coarse-graining procedure. We study this process for a simple triangular lattice of particles connected by harmonic springs in two-dimensions. Coarse-graining local strains obtained from particle configurations in a Monte Carlo simulation generates non-trivial, non-local strain correlations (susceptibilities), which may be understood within a generalized, Landau type elastic Hamiltonian containing up to quartic terms in strain gradients (K. Franzrahe et al., Phys. Rev. E 78, 026106 (2008)). In order to demonstrate the versatility of the analysis of these correlations and to make our calculations directly relevant for experiments on colloidal solids, we systematically study various parameters such as the choice of statistical ensemble, presence of external pressure and boundary conditions. We show that special care needs to be taken for an accurate application of our results to actual experiments, where the analyzed area is embedded within a larger system, to which it is mechanically coupled. Apart from the smooth, affine strain fields, the coarse-graining procedure also gives rise to a noise field made up of non-affine displacements. Several properties of this noise field may be rationalized for the harmonic solid using a simple "cell model" calculation. Furthermore the scaling behavior of the probability distribution of the noise field is studied and a master curve is obtained.
△ Less
Submitted 7 November, 2009;
originally announced November 2009.
-
Current-induced domain wall motion including thermal effects based on Landau-Lifshitz-Bloch equation
Authors:
C. Schieback,
D. Hinzke,
M. Klaui,
U. Nowak,
P. Nielaba
Abstract:
We employ the Landau-Lifshitz-Bloch (LLB) equation to investigate current-induced domain wall motion at finite temperatures by numerical micromagnetic simulations. We extend the LLB equation with spin torque terms that account for the effect of spin-polarized currents and we find that the velocities depend strongly on the interplay between adiabatic and non-adiabatic spin torque terms. As a func…
▽ More
We employ the Landau-Lifshitz-Bloch (LLB) equation to investigate current-induced domain wall motion at finite temperatures by numerical micromagnetic simulations. We extend the LLB equation with spin torque terms that account for the effect of spin-polarized currents and we find that the velocities depend strongly on the interplay between adiabatic and non-adiabatic spin torque terms. As a function of temperature, we find non-monotonous behavior, which might be useful to determine the relative strengths of the spin torque terms experimentally.
△ Less
Submitted 28 September, 2009;
originally announced September 2009.
-
Density Reduction and Diffusion in Driven 2d-Colloidal Systems Through Microchannels
Authors:
P. Henseler,
A. Erbe,
M. Köppl,
P. Leiderer,
P. Nielaba
Abstract:
The behavior of particles driven through a narrow constriction is investigated in experiment and simulation. The system of particles adapts to the confining potentials and the interaction energies by a self-consistent arrangement of the particles. It results in the formation of layers throughout the channel and of a density gradient along the channel. The particles accommodate to the density gra…
▽ More
The behavior of particles driven through a narrow constriction is investigated in experiment and simulation. The system of particles adapts to the confining potentials and the interaction energies by a self-consistent arrangement of the particles. It results in the formation of layers throughout the channel and of a density gradient along the channel. The particles accommodate to the density gradient by reducing the number of layers one by one when it is energetically favorable. The position of the layer reduction zone fluctuates with time while the particles continuously pass this zone. The flow behavior of the particles is studied in detail. The velocities of the particles and their diffusion behavior reflect the influence of the self-organized order of the system.
△ Less
Submitted 13 October, 2008;
originally announced October 2008.
-
Phase transitions in two-dimensional model colloids in a one-dimensional external potential
Authors:
Florian Bürzle,
Peter Nielaba
Abstract:
Two-dimensional melting transitions for model colloids in presence of a one-dimensional external periodic potential are investigated using Monte Carlo simulation and Finite Size Scaling techniques. Here we explore a hard disk system with commensurability ratio $p=\sqrt{3}a_s/(2d)=2$, where $a_s$ is the mean distance between the disks and $d$ the period of the external potential. Three phases, th…
▽ More
Two-dimensional melting transitions for model colloids in presence of a one-dimensional external periodic potential are investigated using Monte Carlo simulation and Finite Size Scaling techniques. Here we explore a hard disk system with commensurability ratio $p=\sqrt{3}a_s/(2d)=2$, where $a_s$ is the mean distance between the disks and $d$ the period of the external potential. Three phases, the modulate liquid, the locked smectic and the locked floating solid are observed, in agreement with other experimental and analytical studies. Various statistical quantities like order parameters, their cumulants and response functions, are used to obtain a phase diagram for the transitions between these three phases.
△ Less
Submitted 13 November, 2007; v1 submitted 30 August, 2007;
originally announced August 2007.
-
Theoretical study of the conductance of ferromagnetic atomic-sized contacts
Authors:
M. Häfner,
J. K. Viljas,
D. Frustaglia,
F. Pauly,
M. Dreher,
P. Nielaba,
J. C. Cuevas
Abstract:
Recently, different experiments on the transport through atomic-sized contacts made of ferromagnetic materials have produced contradictory results. In particular, several groups have reported the observation of half-integer conductance quantization, which requires having full spin polarization and perfectly conducting channels. Motivated by these surprising results, we have studied theoretically…
▽ More
Recently, different experiments on the transport through atomic-sized contacts made of ferromagnetic materials have produced contradictory results. In particular, several groups have reported the observation of half-integer conductance quantization, which requires having full spin polarization and perfectly conducting channels. Motivated by these surprising results, we have studied theoretically the conductance of ideal atomic contact geometries of the ferromagnetic 3d materials Fe, Co, and Ni using a realistic tight-binding model. Our analysis shows that in the absence of magnetic domains, the d bands of these transition metals play a key role in the electrical conduction. In the contact regime this fact has the following important consequences for the three materials: (i) there are partially open conduction channels and therefore conductance quantization is not expected, (ii) the conductance of the last plateau is typically above G_0=2e^2/h, (iii) both spin species contribute to the transport and thus there is in general no full current polarization, and (iv) both the value of the conductance and the current polarization are very sensitive to the contact geometry and to disorder. In the tunneling regime we find that a strong current polarization can be achieved.
△ Less
Submitted 4 August, 2006;
originally announced August 2006.
-
Theoretical analysis of the conductance histograms and structural properties of Ag, Pt and Ni nanocontacts
Authors:
F. Pauly,
M. Dreher,
J. K. Viljas,
M. Häfner,
J. C. Cuevas,
P. Nielaba
Abstract:
Conductance histograms are a valuable tool to study the intrinsic conduction properties of metallic atomic-sized contacts. These histograms show a peak structure, which is characteristic of the type of metal under investigation. Despite the enormous progress in the understanding of the electronic transport in metallic nanowires, the origin of this peak structure is still a basic open problem. In…
▽ More
Conductance histograms are a valuable tool to study the intrinsic conduction properties of metallic atomic-sized contacts. These histograms show a peak structure, which is characteristic of the type of metal under investigation. Despite the enormous progress in the understanding of the electronic transport in metallic nanowires, the origin of this peak structure is still a basic open problem. In the present work we tackle this issue, extending our theoretical analysis of Au conductance histograms [Dreher et al., PRB 72, 075435 (2005)] to different types of metals, namely, Ag, Pt and ferromagnetic Ni. We combine classical molecular dynamics simulations of the breaking of nanocontacts with conductance calculations based on a tight-binding model. This combination gives us access to crucial information such as contact geometries, strain forces, minimum cross-sections, the conductance, transmissions of the individual conduction channels and, in the case of Ni, the spin polarization of the current. We shall also briefly discuss investigations of Al atomic-sized contacts. From our analysis we conclude that the differences in the histograms of these metals are due to (i) the very different electronic structures, which means different atomic orbitals contributing to the transport, and (ii) the different mechanical properties, which in a case like Pt lead to the formation of special structures, namely monoatomic chains. Of particular interest are results for Ni that indicate the absence of any conductance quantization, and show how the current polarization evolves (including large fluctuations) from negative values in thick contacts to even positive values in the tunneling regime after rupture of the contact. Finally, we also present a detailed analysis of the breaking forces of these metallic contacts.
△ Less
Submitted 5 July, 2006;
originally announced July 2006.
-
Lane reduction in driven 2d-colloidal systems through microchannels
Authors:
M. Köppl,
P. Henseler,
A. Erbe,
P. Nielaba,
P. Leiderer
Abstract:
The transport behavior of a system of gravitationally driven colloidal particles is investigated. The particle interactions are determined by the superparamagnetic behavior of the particles. They can thus be arranged in a crystalline order by application of an external magnetic field. Therefore the motion of the particles through a narrow channel occurs in well-defined lanes. The arrangement of…
▽ More
The transport behavior of a system of gravitationally driven colloidal particles is investigated. The particle interactions are determined by the superparamagnetic behavior of the particles. They can thus be arranged in a crystalline order by application of an external magnetic field. Therefore the motion of the particles through a narrow channel occurs in well-defined lanes. The arrangement of the particles is perturbed by diffusion and the motion induced by gravity. Due to these combined influences a density gradient forms along the direction of motion of the particles. A reconfiguration of the crystal is observed leading to a reduction of the number of lanes. In the course of the lane reduction transition a local melting of the quasi-crystalline phase to a disordered phase and a subsequent crystallization along the motion of the particles is observed. This transition is characterized experimentally and using Brownian dynamics (BD) simulations.
△ Less
Submitted 14 June, 2006;
originally announced June 2006.
-
Structure and conductance histogram of atomic-sized Au contacts
Authors:
M. Dreher,
F. Pauly,
J. Heurich,
J. C. Cuevas,
E. Scheer,
P. Nielaba
Abstract:
Many experiments have shown that the conductance histograms of metallic atomic-sized contacts exhibit a peak structure, which is characteristic of the corresponding material. The origin of these peaks still remains as an open problem. In order to shed some light on this issue, we present a theoretical analysis of the conductance histograms of Au atomic contacts. We have combined classical molecu…
▽ More
Many experiments have shown that the conductance histograms of metallic atomic-sized contacts exhibit a peak structure, which is characteristic of the corresponding material. The origin of these peaks still remains as an open problem. In order to shed some light on this issue, we present a theoretical analysis of the conductance histograms of Au atomic contacts. We have combined classical molecular dynamics simulations of the breaking of nanocontacts with conductance calculations based on a tight-binding model. This combination gives us access to crucial information such as contact geometries, forces, minimum cross-section, total conductance and transmission coefficients of the individual conduction channels. The ensemble of our results suggests that the low temperature Au conductance histograms are a consequence of a subtle interplay between mechanical and electrical properties of these nanocontacts. At variance with other suggestions in the literature, our results indicate that the peaks in the Au conductance histograms are not a simple consequence of conductance quantization or the existence of exceptionally stable radii. We show that the main peak in the histogram close to one quantum of conductance is due to the formation of single-atom contacts and chains of gold atoms. Moreover, we present a detailed comparison with experimental results on Au atomic contacts where the individual channel transmissions have been determined.
△ Less
Submitted 14 July, 2005; v1 submitted 11 June, 2004;
originally announced June 2004.
-
Elastic properties of 2D colloidal crystals from video microscopy
Authors:
K. Zahn,
A. Wille,
G. Maret,
S. Sengupta,
P. Nielaba
Abstract:
Elastic constants of two-dimensional (2D) colloidal crystals are determined by measuring strain fluctuations induced by Brownian motion of particles. Paramagnetic colloids confined to an air-water interface of a pending drop are crystallized under the action of a magnetic field, which is applied perpendicular to the 2D layer. Using video-microscopy and digital image-processing we measure fluctua…
▽ More
Elastic constants of two-dimensional (2D) colloidal crystals are determined by measuring strain fluctuations induced by Brownian motion of particles. Paramagnetic colloids confined to an air-water interface of a pending drop are crystallized under the action of a magnetic field, which is applied perpendicular to the 2D layer. Using video-microscopy and digital image-processing we measure fluctuations of the microscopic strain obtained from random displacements of the colloidal particles from their mean (reference) positions. From these we calculate system-size dependent elastic constants, which are extrapolated using finite-size scaling to obtain their values in the thermodynamic limit. The data are found to agree rather well with zero-temperature calculations.
△ Less
Submitted 5 October, 2002;
originally announced October 2002.
-
Phase Transitions of Soft Disks in External Periodic Potentials: A Monte Carlo Study
Authors:
W. Strepp,
S. Sengupta,
P. Nielaba
Abstract:
The nature of freezing and melting transitions for a system of model colloids interacting by a DLVO potential in a spatially periodic external potential is studied using extensive Monte Carlo simulations. Detailed finite size scaling analyses of various thermodynamic quantities like the order parameter, its cumulants etc. are used to map the phase diagram of the system for various values of the…
▽ More
The nature of freezing and melting transitions for a system of model colloids interacting by a DLVO potential in a spatially periodic external potential is studied using extensive Monte Carlo simulations. Detailed finite size scaling analyses of various thermodynamic quantities like the order parameter, its cumulants etc. are used to map the phase diagram of the system for various values of the reduced screening length $κa_{s}$ and the amplitude of the external potential. We find clear indication of a reentrant liquid phase over a significant region of the parameter space. Our simulations therefore show that the system of soft disks behaves in a fashion similar to charge stabilized colloids which are known to undergo an initial freezing, followed by a re-melting transition as the amplitude of the imposed, modulating field produced by crossed laser beams is steadily increased. Detailed analysis of our data shows several features consistent with a recent dislocation unbinding theory of laser induced melting.
△ Less
Submitted 16 September, 2002;
originally announced September 2002.
-
Phase Transitions of Hard Disks in External Periodic Potentials: A Monte Carlo Study
Authors:
W. Strepp,
S. Sengupta,
P. Nielaba
Abstract:
The nature of freezing and melting transitions for a system of hard disks in a spatially periodic external potential is studied using extensive Monte Carlo simulations. Detailed finite size scaling analysis of various thermodynamic quantities like the order parameter, its cumulants etc. are used to map the phase diagram of the system for various values of the density and the amplitude of the ext…
▽ More
The nature of freezing and melting transitions for a system of hard disks in a spatially periodic external potential is studied using extensive Monte Carlo simulations. Detailed finite size scaling analysis of various thermodynamic quantities like the order parameter, its cumulants etc. are used to map the phase diagram of the system for various values of the density and the amplitude of the external potential. We find clear indication of a re-entrant liquid phase over a significant region of the parameter space. Our simulations therefore show that the system of hard disks behaves in a fashion similar to charge stabilized colloids which are known to undergo an initial freezing, followed by a re-melting transition as the amplitude of the imposed, modulating field produced by crossed laser beams is steadily increased. Detailed analysis of our data shows several features consistent with a recent dislocation unbinding theory of laser induced melting.
△ Less
Submitted 23 October, 2000;
originally announced October 2000.
-
Path integral Monte Carlo simulations of silicates
Authors:
Chr. Rickwardt,
P. Nielaba,
M. H. Müser,
K. Binder
Abstract:
We investigate the thermal expansion of crystalline SiO$_2$ in the $β$-- cristobalite and the $β$-quartz structure with path integral Monte Carlo (PIMC) techniques. This simulation method allows to treat low-temperature quantum effects properly. At temperatures below the Debye temperature, thermal properties obtained with PIMC agree better with experimental results than those obtained with class…
▽ More
We investigate the thermal expansion of crystalline SiO$_2$ in the $β$-- cristobalite and the $β$-quartz structure with path integral Monte Carlo (PIMC) techniques. This simulation method allows to treat low-temperature quantum effects properly. At temperatures below the Debye temperature, thermal properties obtained with PIMC agree better with experimental results than those obtained with classical Monte Carlo methods.
△ Less
Submitted 20 October, 2000;
originally announced October 2000.
-
Elastic moduli, dislocation core energy and melting of hard disks in two dimensions
Authors:
S. Sengupta,
P. Nielaba,
K. Binder
Abstract:
Elastic moduli and dislocation core energy of the triangular solid of hard disks of diameter $σ$ are obtained in the limit of vanishing dislocation- antidislocation pair density, from Monte Carlo simulations which incorporates a constraint, namely that all moves altering the local connectivity away from that of the ideal triangular lattice are rejected. In this limit, we show that the solid is s…
▽ More
Elastic moduli and dislocation core energy of the triangular solid of hard disks of diameter $σ$ are obtained in the limit of vanishing dislocation- antidislocation pair density, from Monte Carlo simulations which incorporates a constraint, namely that all moves altering the local connectivity away from that of the ideal triangular lattice are rejected. In this limit, we show that the solid is stable against all other fluctuations at least upto densities as low as $ρσ^2 = 0.88$. Our system does not show any phase transition so diverging correlation lengths leading to finite size effects and slow relaxations do not exist. The dislocation pair formation probability is estimated from the fraction of moves rejected due to the constraint which yields, in turn, the core energy E_c and the (bare) dislocation fugacity y. Using these quantities, we check the relative validity of first order and Kosterlitz-Thouless-Halperin-Nelson-Young (KTHNY) melting scenarios and obtain numerical estimates of the typical expected transition densities and pressures. We conclude that a KTHNY transition from the solid to a hexatic phase preempts the solid to liquid first order transition in this system albeit by a very small margin, easily masked by crossover effects in unconstrained ``brute-force'' simulations with small number of particles.
△ Less
Submitted 28 January, 2000;
originally announced January 2000.
-
Defect fugacity, Spinwave Stiffness and T_c of the 2-d Planar Rotor Model
Authors:
S. Sengupta,
P. Nielaba,
K. Binder
Abstract:
We obtain precise values for the fugacities of vortices in the 2-d planar rotor model from Monte Carlo simulations in the sector with {\em no} vortices. The bare spinwave stiffness is also calculated and shown to have significant anharmonicity. Using these as inputs in the KT recursion relations, we predict the temperature T_c = 0.925, using linearised equations, and $T_c = 0.899 \pm >.005$ usin…
▽ More
We obtain precise values for the fugacities of vortices in the 2-d planar rotor model from Monte Carlo simulations in the sector with {\em no} vortices. The bare spinwave stiffness is also calculated and shown to have significant anharmonicity. Using these as inputs in the KT recursion relations, we predict the temperature T_c = 0.925, using linearised equations, and $T_c = 0.899 \pm >.005$ using next higher order corrections, at which vortex unbinding commences in the unconstrained system. The latter value, being in excellent agreement with all recent determinations of T_c, demonstrates that our method 1) constitutes a stringent measure of the relevance of higher order terms in KT theory and 2) can be used to obtain transition temperatures in similar systems with modest computational effort.
△ Less
Submitted 21 January, 2000;
originally announced January 2000.
-
Elastic constants from microscopic strain fluctuations
Authors:
Surajit Sengupta,
Peter Nielaba,
Madan Rao,
K. Binder
Abstract:
Fluctuations of the instantaneous local Lagrangian strain $ε_{ij}(\bf{r},t)$, measured with respect to a static ``reference'' lattice, are used to obtain accurate estimates of the elastic constants of model solids from atomistic computer simulations. The measured strains are systematically coarse- grained by averaging them within subsystems (of size $L_b$) of a system (of total size $L$) in the…
▽ More
Fluctuations of the instantaneous local Lagrangian strain $ε_{ij}(\bf{r},t)$, measured with respect to a static ``reference'' lattice, are used to obtain accurate estimates of the elastic constants of model solids from atomistic computer simulations. The measured strains are systematically coarse- grained by averaging them within subsystems (of size $L_b$) of a system (of total size $L$) in the canonical ensemble. Using a simple finite size scaling theory we predict the behaviour of the fluctuations $<ε_{ij}ε_{kl}>$ as a function of $L_b/L$ and extract elastic constants of the system {\em in the thermodynamic limit} at nonzero temperature. Our method is simple to implement, efficient and general enough to be able to handle a wide class of model systems including those with singular potentials without any essential modification. We illustrate the technique by computing isothermal elastic constants of the ``soft'' and the hard disk triangular solids in two dimensions from molecular dynamics and Monte Carlo simulations. We compare our results with those from earlier simulations and density functional theory.
△ Less
Submitted 26 October, 1999; v1 submitted 4 June, 1999;
originally announced June 1999.
-
Ordering and Demixing Transitions in Multicomponent Widom-Rowlinson Models
Authors:
J. L. Lebowitz,
A. Mazel,
P. Nielaba,
L. Samaj
Abstract:
We use Monte Carlo techniques and analytical methods to study the phase diagram of multicomponent Widom-Rowlinson models on a square lattice: there are M species all with the same fugacity z and a nearest neighbor hard core exclusion between unlike particles. Simulations show that for M between two and six there is a direct transition from the gas phase at z < z_d (M) to a demixed phase consisti…
▽ More
We use Monte Carlo techniques and analytical methods to study the phase diagram of multicomponent Widom-Rowlinson models on a square lattice: there are M species all with the same fugacity z and a nearest neighbor hard core exclusion between unlike particles. Simulations show that for M between two and six there is a direct transition from the gas phase at z < z_d (M) to a demixed phase consisting mostly of one species at z > z_d (M) while for M \geq 7 there is an intermediate ``crystal phase'' for z lying between z_c(M) and z_d(M). In this phase, which is driven by entropy, particles, independent of species, preferentially occupy one of the sublattices, i.e. spatial symmetry but not particle symmetry is broken. The transition at z_d(M) appears to be first order for M \geq 5 putting it in the Potts model universality class. For large M the transition between the crystalline and demixed phase at z_d(M) can be proven to be first order with z_d(M) \sim M-2 + 1/M + ..., while z_c(M) is argued to behave as μ_{cr}/M, with μ_{cr} the value of the fugacity at which the one component hard square lattice gas has a transition, and to be always of the Ising type. Explicit calculations for the Bethe lattice with the coordination number q=4 give results similar to those for the square lattice except that the transition at z_d(M) becomes first order at M>2. This happens for all q, consistent with the model being in the Potts universality class.
△ Less
Submitted 1 July, 1997;
originally announced July 1997.
-
Phase Transitions in the Multicomponent Widom-Rowlinson Model and in Hard Cubes on the BCC--Lattice
Authors:
P. Nielaba,
J. L. Lebowitz
Abstract:
We use Monte Carlo techniques and analytical methods to study the phase diagram of the M--component Widom-Rowlinson model on the bcc-lattice: there are M species all with the same fugacity z and a nearest neighbor hard core exclusion between unlike particles. Simulations show that for M greater or equal 3 there is a ``crystal phase'' for z lying between z_c(M) and z_d(M) while for z > z_d(M) the…
▽ More
We use Monte Carlo techniques and analytical methods to study the phase diagram of the M--component Widom-Rowlinson model on the bcc-lattice: there are M species all with the same fugacity z and a nearest neighbor hard core exclusion between unlike particles. Simulations show that for M greater or equal 3 there is a ``crystal phase'' for z lying between z_c(M) and z_d(M) while for z > z_d(M) there are M demixed phases each consisting mostly of one species. For M=2 there is a direct second order transition from the gas phase to the demixed phase while for M greater or equal 3 the transition at z_d(M) appears to be first order putting it in the Potts model universality class. For M large, Pirogov-Sinai theory gives z_d(M) ~ M-2+2/(3M^2) + ... . In the crystal phase the particles preferentially occupy one of the sublattices, independent of species, i.e. spatial symmetry but not particle symmetry is broken. For M to infinity this transition approaches that of the one component hard cube gas with fugacity y = zM. We find by direct simulations of such a system a transition at y_c ~ 0.71 which is consistent with the simulation z_c(M) for large M. This transition appears to be always of the Ising type.
△ Less
Submitted 1 July, 1997; v1 submitted 30 June, 1997;
originally announced June 1997.
-
Density-Functional Theory of Quantum Freezing: Sensitivity to Liquid-State Structure and Statistics
Authors:
A. R. Denton,
P. Nielaba,
N. W. Ashcroft
Abstract:
Density-functional theory is applied to compute the ground-state energies of quantum hard-sphere solids. The modified weighted-density approximation is used to map both the Bose and the Fermi solid onto a corresponding uniform Bose liquid, assuming negligible exchange for the Fermi solid. The required liquid-state input data are obtained from a paired phonon analysis and the Feynman approximatio…
▽ More
Density-functional theory is applied to compute the ground-state energies of quantum hard-sphere solids. The modified weighted-density approximation is used to map both the Bose and the Fermi solid onto a corresponding uniform Bose liquid, assuming negligible exchange for the Fermi solid. The required liquid-state input data are obtained from a paired phonon analysis and the Feynman approximation, connecting the static structure factor and the linear response function. The Fermi liquid is treated by the Wu-Feenberg cluster expansion, which approximately accounts for the effects of antisymmetry. Liquid-solid transitions for both systems are obtained with no adjustment of input data. Limited quantitative agreement with simulation indicates a need for further improvement of the liquid-state input through practical alternatives to the Feynman approximation.
△ Less
Submitted 17 March, 1997;
originally announced March 1997.
-
Quantum Fluctuations Driven Orientational Disordering: A Finite-Size Scaling Study
Authors:
R. Martonak,
D. Marx,
P. Nielaba
Abstract:
The orientational ordering transition is investigated in the quantum generalization of the anisotropic-planar-rotor model in the low temperature regime. The phase diagram of the model is first analyzed within the mean-field approximation. This predicts at $T=0$ a phase transition from the ordered to the disordered state when the strength of quantum fluctuations, characterized by the rotational c…
▽ More
The orientational ordering transition is investigated in the quantum generalization of the anisotropic-planar-rotor model in the low temperature regime. The phase diagram of the model is first analyzed within the mean-field approximation. This predicts at $T=0$ a phase transition from the ordered to the disordered state when the strength of quantum fluctuations, characterized by the rotational constant $Θ$, exceeds a critical value $Θ_{\rm c}^{MF}$. As a function of temperature, mean-field theory predicts a range of values of $Θ$ where the system develops long-range order upon cooling, but enters again into a disordered state at sufficiently low temperatures (reentrance). The model is further studied by means of path integral Monte Carlo simulations in combination with finite-size scaling techniques, concentrating on the region of parameter space where reentrance is predicted to occur. The phase diagram determined from the simulations does not seem to exhibit reentrant behavior; at intermediate temperatures a pronounced increase of short-range order is observed rather than a genuine long-range order.
△ Less
Submitted 12 September, 1996;
originally announced September 1996.
-
Tricritical universality in a two-dimensional spin fluid
Authors:
N. B. Wilding,
P. Nielaba
Abstract:
Monte Carlo simulations are used to investigate the tricritical point properties of a 2d spin fluid. Measurements of the scaling operator distributions are employed in conjunction with a finite-size scaling analysis to locate the tricritical point and determine the directions of the relevant scaling fields and their associated tricritical exponents. The scaling operator distributions and exponen…
▽ More
Monte Carlo simulations are used to investigate the tricritical point properties of a 2d spin fluid. Measurements of the scaling operator distributions are employed in conjunction with a finite-size scaling analysis to locate the tricritical point and determine the directions of the relevant scaling fields and their associated tricritical exponents. The scaling operator distributions and exponents are shown to match quantitatively those of the 2d Blume-Capel model, confirming that both models belong to the same universality class. Mean-field calculations of the tricritical point properties are also compared with the simulation measurements.
△ Less
Submitted 11 October, 1995;
originally announced October 1995.
-
Kinetic Roughening in Deposition with Suppressed Screening
Authors:
Peter Nielaba,
Vladimir Privman
Abstract:
Models of irreversible surface deposition of k-mers on a linear lattice, with screening suppressed by disallowing overhangs blocking large gaps, are studied by extensive Monte Carlo simulations of the temporal and size dependence of the growing interface width. Despite earlier finding that for such models the deposit density tends to increase away from the substrate, our numerical results place…
▽ More
Models of irreversible surface deposition of k-mers on a linear lattice, with screening suppressed by disallowing overhangs blocking large gaps, are studied by extensive Monte Carlo simulations of the temporal and size dependence of the growing interface width. Despite earlier finding that for such models the deposit density tends to increase away from the substrate, our numerical results place them clearly within the standard KPZ universality class.
△ Less
Submitted 22 January, 1994;
originally announced January 1994.
-
Locally Frozen Defects in Random Sequential Adsorption with Diffusional Relaxation
Authors:
Jian-Sheng Wang,
Peter Nielaba,
Vladimir Privman
Abstract:
Random sequential adsorption with diffusional relaxation, of two by two square objects on the two-dimensional square lattice is studied by Monte Carlo computer simulation. Asymptotically for large lattice sizes, diffusional relaxation allows the deposition process to reach full coverage. The coverage approaches the full occupation value, 1, as a power-law with convergence exponent near 1/2. For…
▽ More
Random sequential adsorption with diffusional relaxation, of two by two square objects on the two-dimensional square lattice is studied by Monte Carlo computer simulation. Asymptotically for large lattice sizes, diffusional relaxation allows the deposition process to reach full coverage. The coverage approaches the full occupation value, 1, as a power-law with convergence exponent near 1/2. For a periodic lattice of finite (even) size $L$, the final state is a frozen random rectangular grid of domain walls connecting single-site defects. The domain sizes saturate at L**0.8. Prior to saturation, i.e., asymptotically for infinite lattice, the domain growth is power-law with growth exponent near, or possibly somewhat smaller than, 1/2.
△ Less
Submitted 15 June, 1993;
originally announced June 1993.
-
Irreversible Multilayer Adsorption
Authors:
P. Nielaba,
V. Privman,
J. -S. Wang
Abstract:
Random sequential adsorption (RSA) models have been studied due to their relevance to deposition processes on surfaces. The depositing particles are represented by hard-core extended objects; they are not allowed to overlap. Numerical Monte Carlo studies and analytical considerations are reported for 1D and 2D models of multilayer adsorption processes. Deposition without screening is investigate…
▽ More
Random sequential adsorption (RSA) models have been studied due to their relevance to deposition processes on surfaces. The depositing particles are represented by hard-core extended objects; they are not allowed to overlap. Numerical Monte Carlo studies and analytical considerations are reported for 1D and 2D models of multilayer adsorption processes. Deposition without screening is investigated, in certain models the density may actually increase away from the substrate. Analytical studies of the late stage coverage behavior show the crossover from exponential time dependence for the lattice case to the power law behavior in the continuum deposition. 2D lattice and continuum simulations rule out some "exact" conjectures for the jamming coverage. For the deposition of dimers on a 1D lattice with diffusional relaxation we find that the limiting coverage (100%) is approached according to the ~1/t**0.5 power-law preceded, for fast diffusion, by the mean-field crossover regime with the intermediate ~1/t behavior. In case of k-mer deposition (k>3) with diffusion the void fraction decreases according to the power-law t**[-1/(k-1)]. In the case of RSA of lattice hard squares in 2D with diffusional relaxation the approach to the full coverage is ~t**(-0.5).
△ Less
Submitted 20 February, 1993;
originally announced February 1993.
-
Collective Effects in Random Sequential Adsorption of Diffusing Hard Squares
Authors:
J. -S. Wang,
P. Nielaba,
V. Privman
Abstract:
We study by Monte Carlo computer simulations random sequential adsorption (RSA) with diffusional relaxation, of lattice hard squares in two dimensions. While for RSA without diffusion the coverage approaches its maximum jamming value (large-time fractional coverage) exponentially, added diffusion allows the deposition process to proceed to the full coverage. The approach to the full coverage is…
▽ More
We study by Monte Carlo computer simulations random sequential adsorption (RSA) with diffusional relaxation, of lattice hard squares in two dimensions. While for RSA without diffusion the coverage approaches its maximum jamming value (large-time fractional coverage) exponentially, added diffusion allows the deposition process to proceed to the full coverage. The approach to the full coverage is consistent with the t**(-1/2) power law reminiscent of the equilibrium cluster coarsening in models with nonconserved order-parameter dynamics.
△ Less
Submitted 23 October, 1992;
originally announced October 1992.
