-
Vacancy-induced Modification of Electronic Band Structure of LiBO$_{2}$ Material as Cathode Surface Coating of Lithium-ion Batteries
Authors:
Ha M. Nguyen,
Carson D. Ziemke,
Narendirakumar Narayanan,
Sebastian Amaya-Roncanci,
John Gahl,
Yangchuan Xing,
Thomas W. Heitmann,
Carlos Wexler
Abstract:
LiBO$_{2}$ is an electronic insulator and a promising surface coating for stabilizing high-voltage cathodes in lithium-ion batteries. Despite its potential, the functional mechanisms of this coating remain unclear, particularly the transport of lithium ions and electrons through LiBO$_{2}$ in the presence of lattice vacancies. This understanding is critical for the design and development of LiBO…
▽ More
LiBO$_{2}$ is an electronic insulator and a promising surface coating for stabilizing high-voltage cathodes in lithium-ion batteries. Despite its potential, the functional mechanisms of this coating remain unclear, particularly the transport of lithium ions and electrons through LiBO$_{2}$ in the presence of lattice vacancies. This understanding is critical for the design and development of LiBO$_{2}$-based materials. In our previous work [Ziemke $\textit{et al.}$, J. Mater. Chem. A, 2025, $\textbf{13}$, 3146-3162], we used density functional theory (DFT) calculations to investigate the impact of lattice vacancies on Li-ion transport in both tetragonal (t-LBO) and monoclinic (m-LBO) polymorphs of LiBO$_{2}$, revealing that B vacancies in either polymorph enhanced lithium-ion transport. In this study, we expand on these findings by using DFT calculations to examine the effects of lattice vacancies on the electronic properties of both t-LBO and m-LBO polymorphs,focusing on the electronic band structure. Our analysis shows that B vacancies can enhance the electronic insulation of t-LBO while improving the ionic conduction of m-LBO. The combined results of our previous and current works indicate that B vacancy generation in LiBO$_{2}$ may enable t-LBO to function as a promising solid electrolyte and enhance the performance of m-LBO as a conformal cathode coating in lithium-ion batteries. Overall, generating B vacancies, such as through neutron irradiation, would offer a viable strategy to improve the functionality of LiBO$_{2}$ as a promising material for energy storage applications.
△ Less
Submitted 14 March, 2025;
originally announced March 2025.
-
Formation of Lattice Vacancies and their Effects on Lithium-ion Transport in LiBO2 Crystals: Comparative Ab Initio Studies
Authors:
Carson Ziemke,
Ha M. Nguyen,
Sebastian Amaya-Roncancio,
John Gahl,
Yangchuan Xing,
Thomas W. Heitmann,
Carlos Wexler
Abstract:
The monoclinic (m-LBO) and tetragonal (t-LBO) polymorphs of LiBO2 have significant potential for applications such as solid electrolytes and electrode coatings of lithium-ion batteries. While comparative experimental studies of electron and lithium transport in these polymorphs exist, the role of lattice vacancies on lithium transport remains unclear. In this study, we employed density functional…
▽ More
The monoclinic (m-LBO) and tetragonal (t-LBO) polymorphs of LiBO2 have significant potential for applications such as solid electrolytes and electrode coatings of lithium-ion batteries. While comparative experimental studies of electron and lithium transport in these polymorphs exist, the role of lattice vacancies on lithium transport remains unclear. In this study, we employed density functional theory (DFT) to investigate the impact of boron and oxygen vacancies on the lattice structure, electronic properties, and lithium migration energy barrier (Em) in m-LBO and t-LBO. Our DFT results reveal that boron and oxygen vacancies affect lithium transport in both the polymorphs, but in different ways. While oxygen vacancies lower Em in m-LBO, they increases Em in t-LBO. In contrast, boron vacancies significantly reduce Em in both m-LBO and t-LBO, leading to enhanced diffusivity and ionic conductivity in both polymorphs. This improvement suggests a potential strategy for improving ionic conductivity in LiBO2 through boron vacancy generation.
△ Less
Submitted 8 October, 2024;
originally announced October 2024.
-
Influence of fatty alcohol mixing ratios on the physicochemical properties of Stearyl--Cetyl Alcohol--Polysorbate 60--Water ternary System: Insights from Experiments and Computer Simulations
Authors:
Vu Dang Hoang,
Cao Phuong Cong,
Hung Huu Tran,
Hue Minh Thi Nguyen,
Toan T. Nguyen
Abstract:
The structure and stability of ternary systems prepared with polysorbate 60 and various combinations of cetyl (C16) and stearyl (C18) alcohols (fatty alcohol 16g, polysorbate 4g, water 180g) were examined as they aged over 3 months at 25oC. Rheological results showed that the consistency of these systems increased initially during roughly the first week of aging, which was succeeded by little chan…
▽ More
The structure and stability of ternary systems prepared with polysorbate 60 and various combinations of cetyl (C16) and stearyl (C18) alcohols (fatty alcohol 16g, polysorbate 4g, water 180g) were examined as they aged over 3 months at 25oC. Rheological results showed that the consistency of these systems increased initially during roughly the first week of aging, which was succeeded by little changes in consistency (systems containing from 30% to 70% C18, with the 50% C18 system showing the highest consistencies in viscosity and elasticity) or significant breakdown of structure (remaining systems). The formation and/or disintegration of all ternary systems were also detected by microscopy and differential scanning calorimetry experiments. This study emphasizes the fact that the structure and consistency of ternary systems are dominantly controlled by the swelling capacity of the lamellar $α-$crystalline gel phase. When the conversion of this gel phase into non-swollen $β$- or $γ$-crystals occurs, systems change from semisolids to fluids. Molecular dynamics simulations were performed to provide important details on the molecular mechanism of our ternary systems. Computational results supported the hypothesis experimentally proposed for the stability of the mixed system being due to an increase in the flexibility, hence an increase in the configurational entropy of the chain tip of the alcohol with a longer hydrocarbon chain (with the highest flexibility observed in the 50:50 C18:C16 system). This finding is in excellent agreement with experimental conclusions. Additionally, simulation data show that in the mixed system, the alcohol with shorter hydrocarbon chain becomes more rigid. These molecular details could not be available in experimental measurements
△ Less
Submitted 9 February, 2021; v1 submitted 26 January, 2021;
originally announced January 2021.
-
Investigating molecular mechanism for the stability of ternary systems containing cetrimide, fatty alcohol and water by using computer simulation
Authors:
Vu Dang Hoang,
Hung Huu Tran,
Cao Cong Phuong,
Hue Minh Thi Nguyen,
Toan T. Nguyen
Abstract:
Computer simulations using atomistic model are carried out to investigate the stability of ternary systems of pure or mixed fatty alcohols, cetrimide, and water. These semi$-$solid oil-in-water systems are used as the main component of pharmaceutical creams. Experiments show that the mixed alcohol systems are more stable than pure ones. The current experimental hypothesis is that this is the resul…
▽ More
Computer simulations using atomistic model are carried out to investigate the stability of ternary systems of pure or mixed fatty alcohols, cetrimide, and water. These semi$-$solid oil-in-water systems are used as the main component of pharmaceutical creams. Experiments show that the mixed alcohol systems are more stable than pure ones. The current experimental hypothesis is that this is the result of the length mismatch of the alkyl chains. This leads to higher configurational entropy of the chain tip of the longer alcohol molecules. Our simulation results support this hypothesis. The results also show that the shorter alcohol molecules become stiffer with higher values of the deuterium order parameters and smaller area per molecule. The magnitude in fluctuations in the area per molecule also increases in mixed systems, indicating a higher configurational entropy. Analysis of the molecular structure of simulated systems also shows good agreements with experimental data.
△ Less
Submitted 6 May, 2019;
originally announced May 2019.
-
Lithium transport through Lithium-ion battery cathode coatings
Authors:
Shenzhen Xu,
Ryan M. Jacobs,
Ha M. Nguyen,
Shiqiang Hao,
Mahesh Mahanthappa,
Chris Wolverton,
Dane Morgan
Abstract:
The surface coating of cathodes using insulator films has proven to be a promising method for high-voltage cathode stabilization in Li-ion batteries. However, there is still substantial uncertainty about how these films function, specifically with regard to important coating design principles such as lithium solubility and transport through the films. This study uses Density Functional Theory to e…
▽ More
The surface coating of cathodes using insulator films has proven to be a promising method for high-voltage cathode stabilization in Li-ion batteries. However, there is still substantial uncertainty about how these films function, specifically with regard to important coating design principles such as lithium solubility and transport through the films. This study uses Density Functional Theory to examine the diffusivity of interstitial lithium in crystalline α-$AlF_3$, α-$Al_2O_3$, m-$ZrO_2$, c-MgO, and α-quartz $SiO_2$, which provide benchmark cases for further understanding of insulator coatings in general. In addition, we propose an Ohmic electrolyte model to predict resistivities and overpotential contributions under battery operating conditions. For the crystalline materials considered we predict that Li+ diffuses quite slowly, with a migration barrier larger than 0.9 eV in all crystalline materials except α-quartz $SiO_2$, which is predicted to have a migration barrier of 0.276 eV along <001>. These results suggest that the stable crystalline forms of these insulator materials, except for oriented α-quartz $SiO_2$, are not practical for conformal cathode coatings. Amorphous $Al_2O_3$ and $AlF_3$ have higher Li+ diffusivities than their crystalline counterparts. Our predicted amorphous $Al_2O_3$ resistivity (1789 MΩm) is near the top of the range of fitted resistivities extracted from previous experiments on nominal $Al_2O_3$ coatings (7.8 to 913 MΩm) while our predicted amorphous $AlF_3$ resistivity (114 MΩm) is close to the middle of the range. These comparisons support our framework for modeling and understanding the impact on overpotential of conformal coatings in terms of their fundamental thermodynamic and kinetic properties, and support that these materials can provide practical conformal coatings in their amorphous form.
△ Less
Submitted 7 July, 2016;
originally announced July 2016.
-
An ac field probe for the magnetic ordering of magnets with random anisotropy
Authors:
Ha M. Nguyen,
Pai-Yi Hsiao
Abstract:
A Monte Carlo simulation is carried out to investigate the magnetic ordering in magnets with random anisotropy (RA). Our results show peculiar similarities to recent experiments that the real part of ac susceptibility presents two peaks for weak RA and only one for strong RA regardless of glassy critical dynamics manifested for them. We demonstrate that the thermodynamic nature of the low-temper…
▽ More
A Monte Carlo simulation is carried out to investigate the magnetic ordering in magnets with random anisotropy (RA). Our results show peculiar similarities to recent experiments that the real part of ac susceptibility presents two peaks for weak RA and only one for strong RA regardless of glassy critical dynamics manifested for them. We demonstrate that the thermodynamic nature of the low-temperature peak is a ferromagnetic-like dynamic phase transition to quasi-long range order (QLRO) for the former. Our simulation, therefore, is able to be incorporated with the experiments to help clarify the existence of the QLRO theoretically predicted so far.
△ Less
Submitted 12 November, 2009;
originally announced November 2009.
-
Comment on "Critical and slow dynamics in a bulk metallic glass exhibiting strong random magnetic anisotropy" [Appl. Phys. Lett. 92, 011923 (2008)]
Authors:
Ha M. Nguyen,
Pai-Yi Hsiao
Abstract:
In this comment, by using Monte Carlo simulation, we show that the perpendicular shift of hysteresis loops reported in the commented work is nothing special but simply due to the fact that the range of field does not surpass the reversible field beyond which the two branches of the loop merge. If the reversible field is exceeded, the shift is no longer observed. Moreover, we point out that even…
▽ More
In this comment, by using Monte Carlo simulation, we show that the perpendicular shift of hysteresis loops reported in the commented work is nothing special but simply due to the fact that the range of field does not surpass the reversible field beyond which the two branches of the loop merge. If the reversible field is exceeded, the shift is no longer observed. Moreover, we point out that even using a small range of field, the shift will not be observed if the observation time is long enough for the reversible field to drop within the range.
△ Less
Submitted 30 March, 2009;
originally announced March 2009.
-
Mangetic phase transition for three-dimensional Heisenberg weak random anisotropy model: Monte Carlo study
Authors:
Ha M. Nguyen,
Pai-Yi Hsiao
Abstract:
Magnetic phase transition (MPT) to magnetic quasi-long-range order (QLRO) phase in a three-dimensional Heisenberg weak (D/J=4) random anisotropy (RA) model is investigated by Monte Carlo simulation. The isotropic and cubic distributions of RA axes are considered for simple-cubic-lattice systems. Finite-size scaling analysis shows that the critical couplings for the former and latter are K_c= 0.7…
▽ More
Magnetic phase transition (MPT) to magnetic quasi-long-range order (QLRO) phase in a three-dimensional Heisenberg weak (D/J=4) random anisotropy (RA) model is investigated by Monte Carlo simulation. The isotropic and cubic distributions of RA axes are considered for simple-cubic-lattice systems. Finite-size scaling analysis shows that the critical couplings for the former and latter are K_c= 0.70435(2) and K_c=0.70998(4), respectively. While the critical exponent 1/ν=1.40824(0) is the same for both cases. A second-order MPT to the QLRO phase is therefore evidenced to be possible in favor with the existence of the QLRO predicted by recent functional renormalization group theories.
△ Less
Submitted 9 March, 2009;
originally announced March 2009.
-
Exchange-driven Collective Behavior in a 3D Array of Nanoparticles
Authors:
Ha M. Nguyen,
Pai-Yi Hsiao
Abstract:
A Monte Carlo simulation is performed in a cubic lattice of interacting identical Stoner-Woldfarth nanoparticles. The model system is a randomly-anisotropic Heisenberg spin system with a small anisotropy-to-exchange ratio D/J = 3.5. The dc susceptibility, chi(dc)(T), shows a Curie-Weiss-like transition at a temperature T-C/J approximate to 1.5, followed by a low-temperature glassy behavior manif…
▽ More
A Monte Carlo simulation is performed in a cubic lattice of interacting identical Stoner-Woldfarth nanoparticles. The model system is a randomly-anisotropic Heisenberg spin system with a small anisotropy-to-exchange ratio D/J = 3.5. The dc susceptibility, chi(dc)(T), shows a Curie-Weiss-like transition at a temperature T-C/J approximate to 1.5, followed by a low-temperature glassy behavior manifested by cusps in both the zero-field-cooled and the field-cooled curves. The ac susceptibility, chi(ac) (T, omega), at various frequencies, w, shows that with decreasing temperature, a non-Arrhenius dispersive peak occurs at T-b(omega), succeeded by another dispersionless peak at T-g/J approximate to 1.20 in the in-phase part, chi'(T, omega), of chi (T, omega) while the out-of-phase part, chi '' (T, omega), shows only one peak. A dynamic scaling analysis shows that the system exhibits a critical slowing-down at T-g with a quite small exponent zv approximate to 1.65. However, no universal collapse is seen for the fully-scaled data of chi '' (T, omega). These observed behaviors are interpreted under the droplet-like hypothesis that the formation and development of exchange-induced correlated clusters drive ensembles of nanoparticles undergoing a transition from a paramagnetic order to a short-range order (SRO) at T-C, followed by a transition at T-g to the magnetic state in which a magnetic glassy order and a magnetic quasi-long-range order (QLRO) coexist. In addition, our simulation shows that the onset of the latter transition, which is peculiarly manifested by the dispersionless peak, occurs only for those ensembles possessing the anisotropy strength in the region 1.0 <= D/J <= 5.0.....
△ Less
Submitted 9 March, 2009;
originally announced March 2009.
-
Interacting Superparamagnetism in La0.7Sr0.3MnO3 Nanoparticles
Authors:
Ha M. Nguyen,
D. H. Manh,
L. V. Hong,
N. X. Phuc,
Y. D. Yao
Abstract:
The magnetic order of La0.7Sr0.3MnO3 nanoparticles (NPs) fabricated in a SPEX D8000 mill was systematically studied. The La0.7Sr0.3MnO3 nanocrystals grow from the milled constituent oxides during the milling processes. The magnetization data obtained by using a SQUID magnetometer show the NPs as a superparamagnet in terms of anhysteretic curves near room temperature. Unoverlaping of the scaled M…
▽ More
The magnetic order of La0.7Sr0.3MnO3 nanoparticles (NPs) fabricated in a SPEX D8000 mill was systematically studied. The La0.7Sr0.3MnO3 nanocrystals grow from the milled constituent oxides during the milling processes. The magnetization data obtained by using a SQUID magnetometer show the NPs as a superparamagnet in terms of anhysteretic curves near room temperature. Unoverlaping of the scaled M(H-ext, T)/M-s vs. H-ext, T plots and the dc susceptibility obeying the Curie-Weiss behavior rather than the Curie law at high temperatures provide evidence that the NPs are interacting superparamagnetic ensembles. A mean-field correction to the Langevin function L ([H-ext + alpha M]/k(B)T) worked well for the magnetic ordering of the NPs. By means of the Langevin fitting, the diameter of the NP was estimated to be lower than 15 nm, depending oil the milling time. The saturation magnetization of NPs varied from 48.5 em/g to 19 emu/g, with the higher value corresponding to a larger particle size. A core-shell structure of the NP was adopted, with the NP having the core-shell magnetically-effective mass density. This is applicable to the variation of the saturation magnetization with particle size.
△ Less
Submitted 9 March, 2009;
originally announced March 2009.
