Showing 1–9 of 9 results for author: Nguyen, G D

Interlayer magnetism in Fe3-xGeTe2

Authors: Xiangru Kong, Giang D. Nguyen, Jinhwan Lee, Changgu Lee, Stuart Calder, Andrew F. May, Zheng Gai, An-Ping Li, Liangbo Liang, Tom Berlijn

Abstract: Fe$_{3-x}$GeTe$_2$ is a layered van der Waals magnetic material with a relatively high ordering temperature and large anisotropy. While most studies have concluded the interlayer ordering to be ferromagnetic, there have also been reports of interlayer antiferromagnetism in Fe$_{3-x}$GeTe$_2$. Here, we investigate the interlayer magnetic ordering by neutron diffraction experiments, scanning tunneli… ▽ More Fe$_{3-x}$GeTe$_2$ is a layered van der Waals magnetic material with a relatively high ordering temperature and large anisotropy. While most studies have concluded the interlayer ordering to be ferromagnetic, there have also been reports of interlayer antiferromagnetism in Fe$_{3-x}$GeTe$_2$. Here, we investigate the interlayer magnetic ordering by neutron diffraction experiments, scanning tunneling microscopy (STM) and spin-polarized STM measurements, density functional theory plus U calculations and STM simulations. We conclude that the layers of Fe$_{3-x}$GeTe$_2$ are coupled ferromagnetically and that in order to capture the magnetic and electronic properties of Fe$_{3-x}$GeTe$_2$ within density functional theory, Hubbard U corrections need to be taken into account. △ Less

Submitted 11 September, 2020; v1 submitted 1 June, 2020; originally announced June 2020.

Journal ref: Phys. Rev. Materials 4, 094403 (2020)

Emerging edge states on the surface of the epitaxial semimetal CuMnAs thin film

Authors: Giang D. Nguyen, Krishna Pitike, Peter Wadley, Valentino R Cooper, Mina Yoon, Tom Berlijn, An-Ping Li

Abstract: Epitaxial thin films of CuMnAs have recently attracted attention due to their potential to host relativistic antiferromagnetic spintronics and exotic topological physics. Here we report on the structural and electronic properties of a tetragonal CuMnAs thin film studied using scanning tunneling microscopy (STM) and density functional theory (DFT). STM reveals a surface terminated by As atoms, with… ▽ More Epitaxial thin films of CuMnAs have recently attracted attention due to their potential to host relativistic antiferromagnetic spintronics and exotic topological physics. Here we report on the structural and electronic properties of a tetragonal CuMnAs thin film studied using scanning tunneling microscopy (STM) and density functional theory (DFT). STM reveals a surface terminated by As atoms, with the expected semi-metallic behavior. An unexpected zigzag step edge surface reconstruction is observed with emerging electronic states below the Fermi energy. DFT calculations indicate that the step edge reconstruction can be attributed to an As deficiency that results in changes in the density of states of the remaining As atoms at the step edge. This understanding of the surface structure and step edges on the CuMnAs thin film will enable in-depth studies of its topological properties and magnetism. △ Less

Submitted 7 February, 2020; v1 submitted 30 July, 2019; originally announced July 2019.

Atomic-scale manipulation and in situ characterization with scanning tunneling microscopy

Authors: Wonhee Ko, Chuanxu Ma, Giang D. Nguyen, Marek Kolmer, An-Ping Li

Abstract: Scanning tunneling microscope (STM) has presented a revolutionary methodology to the nanoscience and nanotechnology. It enables imaging the topography of surfaces, mapping the distribution of electronic density of states, and manipulating individual atoms and molecules, all at the atomic resolution. In particular, the atom manipulation capability has evolved from fabricating individual nanostructu… ▽ More Scanning tunneling microscope (STM) has presented a revolutionary methodology to the nanoscience and nanotechnology. It enables imaging the topography of surfaces, mapping the distribution of electronic density of states, and manipulating individual atoms and molecules, all at the atomic resolution. In particular, the atom manipulation capability has evolved from fabricating individual nanostructures towards the scalable production of the atomic-sized devices bottom-up. The combination of precision synthesis and in situ characterization of the atomically precise structures has enabled direct visualization of many quantum phenomena and fast proof-of-principle testing of quantum device functions with real-time feedback to guide the improved synthesis. In this article, several representative examples are reviewed to demonstrate the recent development of atomic scale manipulation. Especially, the review focuses on the progress that address the quantum properties by design through the precise control of the atomic structures in several technologically relevant materials systems. Besides conventional STM manipulations and electronic structure characterization with single-probe STM, integration of multiple atomically precisely controlled probes in a multiprobe STM system vastly extends the capability of in situ characterization to a new dimension where the charge and spin transport behaviors can be examined from mesoscopic to atomic length scale. The automation of the atomic scale manipulation and the integration with the well-established lithographic processes would further push this bottom-up approach to a new level that combines reproducible fabrication, extraordinary programmability, and the ability to produce large-scale arrays of quantum structures. △ Less

Submitted 23 May, 2019; originally announced May 2019.

Journal ref: Adv. Funct. Mater. 2019, 29 1903770

Local Superconductivity in Vanadium Iron Arsenide

Authors: Athena S. Sefat, Giang D. Nguyen, David S. Parker, Mingming M. Fu, Qiang Zou, An-Ping Li, Huibo B. Cao, 3 L. Duminda Sanjeewa, Li Li, Z. Gai

Abstract: We investigate the chemical substitution of group 5 into BaFe2As2 (122) iron arsenide, in the effort to understand why Fe-site hole doping of this compound (e.g., using group 5 or 6) does not yield bulk superconductivity. We find an increase in c-lattice parameter of the BaFe2As2 with the substitution of V, Nb, or Ta; the reduction in c predicts the lack of bulk superconductivity [1] that is confi… ▽ More We investigate the chemical substitution of group 5 into BaFe2As2 (122) iron arsenide, in the effort to understand why Fe-site hole doping of this compound (e.g., using group 5 or 6) does not yield bulk superconductivity. We find an increase in c-lattice parameter of the BaFe2As2 with the substitution of V, Nb, or Ta; the reduction in c predicts the lack of bulk superconductivity [1] that is confirmed here through transport and magnetization results. However, our spectroscopy measurements find a coexistence of antiferromagnetic and local superconducting nanoscale regions in V-122, observed for the first time in a transition-metal hole-doped iron arsenide. In BaFe2As2, there is a complex connection between local parameters such as composition and lattice strain, average lattice details, and the emergence of bulk quantum states such as superconductivity and magnetism. [1] L. M. N. Konzen, and A. S. Sefat, J. Phys.: Condens. Matter 29 (2017), 083001. △ Less

Submitted 30 August, 2019; v1 submitted 8 March, 2019; originally announced March 2019.

Comments: 5 figures (including supplemental)

Journal ref: Phys. Rev. B 100, 104525 (2019)

Modelling Localisation and Spatial Scaling of Constitutive Behaviour: a Kinematically Enriched Continuum Approach

Authors: Giang Dinh Nguyen, Chi Thanh Nguyen, Vinh Phu Nguyen

Abstract: It is well known that classical constitutive models fail to capture the post-peak material behaviour, due to localisation of deformation. In such cases the concept of Representative Volume Element (RVE) on which classical continuum models rest ceases to exist and hence the smearing out of local inhomogeneities over the whole RVE is no longer correct. This paper presents a new approach to capturing… ▽ More It is well known that classical constitutive models fail to capture the post-peak material behaviour, due to localisation of deformation. In such cases the concept of Representative Volume Element (RVE) on which classical continuum models rest ceases to exist and hence the smearing out of local inhomogeneities over the whole RVE is no longer correct. This paper presents a new approach to capturing localised failure in quasi-brittle materials, focusing on the kinematic enrichment of the constitutive model to describe correctly the behaviour of a volume element with an embedded localisation band. The resulting models possess an intrinsic length scale which in this case is the width of the embedded localisation band. The behaviour therefore scales with both the width of the localisation band and the size of the volume on which the model is defined. As a consequence, size effects are automatically captured in addition to the model capability in capturing behaviour at the scale of the localisation zone. △ Less

Submitted 26 September, 2014; originally announced October 2014.

Comments: Proceedings of Asian-Pacific Conference on Fracture and Strength 2014 and the International Conference on Structural Integrity and Failure, 9-12 December, Sydney, Australia

A Conceptual Approach to Two-Scale Constitutive Modelling For Hydro-Mechanical Coupling

Authors: Giang D. Nguyen, Abbas El-Zein, Terry Bennett

Abstract: Large scale modelling of fluid flow coupled with solid failure in geothermal reservoirs or hydrocarbon extraction from reservoir rocks usually involves behaviours at two scales: lower scale of the inelastic localization zone, and larger scale of the bulk continuum where elastic behaviour can be reasonably assumed. The hydraulic conductivities corresponding to the mechanical properties at these two… ▽ More Large scale modelling of fluid flow coupled with solid failure in geothermal reservoirs or hydrocarbon extraction from reservoir rocks usually involves behaviours at two scales: lower scale of the inelastic localization zone, and larger scale of the bulk continuum where elastic behaviour can be reasonably assumed. The hydraulic conductivities corresponding to the mechanical properties at these two scales are different. In the bulk elastic host rock, the hydraulic conductivity does not vary much with the deformation, while it significantly changes in the lower scale of the localization zone due to inelastic deformation. Increase of permeability due to fracture and/or dilation, or reduction of permeability due to material compaction can take place inside this zone. The challenge is to predict the evolution of hydraulic conductivities coupled with the mechanical behaviour of the material in all stages of the deformation process. In the early stage of diffuse deformation, the permeability of the material can be reasonably assumed to be homogenous over the whole Representative Volume Element (RVE) However, localized failure results in distinctly different conductivities in different parts of the RVE. This paper establishes a general framework and corresponding field equations to describe the hydro-mechanical coupling in both diffuse and localized stages of deformation in rocks. In particular, embedding the lower scale hydro-mechanical behaviour of the localization zone inside an elastic bulk, together with their corresponding effective sizes, helps effectively deal with scaling issues in large-scale modelling. Preliminary results are presented which demonstrate the promising features of this new approach. △ Less

Submitted 5 June, 2014; v1 submitted 4 June, 2014; originally announced June 2014.

Comments: 7th International Congress on Environmental Geotechnics

An Enriched Constitutive Model for Fracture Propagation Analysis using the Material Point Method

Authors: Giang Dinh Nguyen

Abstract: We develop a novel constitutive modeling approach for the analysis of fracture propagation in quasi-brittle materials using the Material Point Method. The kinematics of constitutive models is enriched with an additional mode of localized deformation to take into account the strain discontinuity once cracking has occurred. The crack details therefore can be stored at material point level and there… ▽ More We develop a novel constitutive modeling approach for the analysis of fracture propagation in quasi-brittle materials using the Material Point Method. The kinematics of constitutive models is enriched with an additional mode of localized deformation to take into account the strain discontinuity once cracking has occurred. The crack details therefore can be stored at material point level and there is no need to enrich the kinematics of finite elements to capture the localization caused by fracturing processes. This enhancement also removes the drawback of classical smeared crack approach in producing unphysical snapping back constitutive responses when the spatial resolution is not fine enough. All these facilitate the implementation of the new approach in the Material Point Method for analysis of large scale problems. Numerical examples of fracture propagation are used to demonstrate the effectiveness and potentials of the new approach. △ Less

Submitted 15 November, 2013; originally announced November 2013.

Comments: 1st Australasian Conference on Computational mechanics (ACCM2013), Sydney 3-4 Oct 2013

A multiphase constitutive modeling framework for unsaturated soil behavior

Authors: Giang D. Nguyen, Yixiang Gan

Abstract: We develop a framework for constitutive modeling of unsaturated soils that has the embedded elements of lower scale grain to grain contacts. Continuum models developed from this framework will possess two different phases idealizing the solid grains and their interactions. As a consequence, two different constitutive relationships, corresponding to the grain to grain contact and bulk behavior, co-… ▽ More We develop a framework for constitutive modeling of unsaturated soils that has the embedded elements of lower scale grain to grain contacts. Continuum models developed from this framework will possess two different phases idealizing the solid grains and their interactions. As a consequence, two different constitutive relationships, corresponding to the grain to grain contact and bulk behavior, co-exist in a constitutive model and govern the response of the model. To be specific, grain to grain sliding under dry or wet condition is idealized and appears as a simple contact law embedded in a continuum framework. There is no need to define plastic strain, as this quantity naturally emerges at the continuum scale as the consequence of frictional sliding at the lower scale. In addition, the effective stress can be naturally worked out from the grain to grain contact law embedded in the model without being subjected to any interpretation. This, in our opinion, is a closer representation of unsaturated soil behavior, compared to existing continuum approaches that map everything onto a single stress-strain relationship. In this paper, the framework is presented in its simplest form that takes into account sliding on a single orientation. Grain to grain contact law with capillary effects is used for the demonstration of the concept, and the technical details behind it. Generalization of the framework for better representation of unsaturated soil behavior will also be sketched out. △ Less

Submitted 25 January, 2014; v1 submitted 31 October, 2013; originally announced November 2013.

Comments: 6 pages, 8 figures. Conference: UNSAT2014 Unsaturated Soils: Research & Applications, Sydney, Australia, 2-4 July 2014

Intermolecular interactions and substrate effects for an adamantane monolayer on the Au(111) surface

Authors: Yuki Sakai, Giang D. Nguyen, Rodrigo B. Capaz, Sinisa Coh, Ivan V. Pechenezhskiy, Xiaoping Hong, Feng Wang, Michael F. Crommie, Susumu Saito, Steven G. Louie, Marvin L. Cohen

Abstract: We study theoretically and experimentally the infrared (IR) spectrum of an adamantane monolayer on a Au(111) surface. Using a new STM-based IR spectroscopy technique (IRSTM) we are able to measure both the nanoscale structure of an adamantane monolayer on Au(111) as well as its infrared spectrum, while DFT-based ab initio calculations allow us to interpret the microscopic vibrational dynamics reve… ▽ More We study theoretically and experimentally the infrared (IR) spectrum of an adamantane monolayer on a Au(111) surface. Using a new STM-based IR spectroscopy technique (IRSTM) we are able to measure both the nanoscale structure of an adamantane monolayer on Au(111) as well as its infrared spectrum, while DFT-based ab initio calculations allow us to interpret the microscopic vibrational dynamics revealed by our measurements. We find that the IR spectrum of an adamantane monolayer on Au(111) is substantially modified with respect to the gas-phase IR spectrum. The first modification is caused by the adamantane--adamantane interaction due to monolayer packing and it reduces the IR intensity of the 2912 cm$^{-1}$ peak (gas phase) by a factor of 3.5. The second modification originates from the adamantane--gold interaction and it increases the IR intensity of the 2938 cm$^{-1}$ peak (gas phase) by a factor of 2.6, and reduces its frequency by 276 cm$^{-1}$. We expect that the techniques described here can be used for an independent estimate of substrate effects and intermolecular interactions in other diamondoid molecules, and for other metallic substrates. △ Less

Submitted 19 September, 2013; originally announced September 2013.

Comments: 24 pages, 10 figures