-
Nature of short high amplitude pulses in a periodic dissipative laminate metamaterial
Authors:
Pedro Franco Navarro,
David J. Benson,
Vitali F. Nesterenko
Abstract:
We study the evolution of high amplitude stress pulses in periodic dissipative laminates taking into account the nonlinear constitutive equations of the components and their dissipative behavior. Aluminum and Tungsten laminate was taken as an example due to the large difference in acoustic impedances of aluminum and tungsten, the significant nonlinearity of aluminum constitutive equation at the in…
▽ More
We study the evolution of high amplitude stress pulses in periodic dissipative laminates taking into account the nonlinear constitutive equations of the components and their dissipative behavior. Aluminum and Tungsten laminate was taken as an example due to the large difference in acoustic impedances of aluminum and tungsten, the significant nonlinearity of aluminum constitutive equation at the investigated range of stresses, and its possible practical applications. Laminates with different cell size, which controls internal time scale, impacted by the plates with different thicknesses, determining the incoming pulse duration, were investigated. It has been observed that the ratio of the duration of the incoming pulse to the internal characteristic time determines the nature of the high amplitude dissipative propagating waves, the oscillatory shock like profile, the train of localized pulses or a single localized pulse. These localized quasistationary waves resemble solitary waves even in the presence of dissipation: the similar pulses emerged from different initial conditions, indicating that they are inherent properties of the corresponding laminates, their characteristic length scale is determined by the mesostructural scale and the stress amplitude, and they mostly recover their shapes after collision with phase shift and a linear relationship exists between their speed and amplitude. A theoretical description approximating the shape, length scale and speed of these high amplitude dissipative pulses was proposed based on the Korteweg de Vries type equation with a dispersive term dictated by the mesostructure. The nonlinear term is derived from nonlinear constitutive equations of Aluminum and Tungsten, which were extracted from their Hugoniot curves.
△ Less
Submitted 1 June, 2015;
originally announced June 2015.
-
Attenuation of short strongly nonlinear stress pulses in dissipative granular chains
Authors:
S. Y. Wang,
V. F. Nesterenko
Abstract:
Attenuation of short, strongly nonlinear stress pulses in chains of spheres and cylinders was investigated experimentally and numerically for two ratios of their masses keeping their contacts identical. The chain with mass ratio 0.98 supports solitary waves and another one (with mass ratio 0.55) supports nonstationary pulses which preserve their identity only on relatively short distances, but att…
▽ More
Attenuation of short, strongly nonlinear stress pulses in chains of spheres and cylinders was investigated experimentally and numerically for two ratios of their masses keeping their contacts identical. The chain with mass ratio 0.98 supports solitary waves and another one (with mass ratio 0.55) supports nonstationary pulses which preserve their identity only on relatively short distances, but attenuate on longer distances because of radiation of small amplitude tails generated by oscillating small mass particles. Pulse attenuation in experiments in the chain with mass ratio 0.55 was faster at the same number of the particles from the entrance than in the chain with mass ratio 0.98. It is in quantitative agreement with results of numerical calculations with effective damping coefficient 6 kg/s. This level of damping was critical for eliminating the gap openings between particles in the system with mass ratio 0.55 present at lower or no damping. However with increase of dissipation numerical results show that the chain with mass ratio 0.98 provides faster attenuation than chain with mass ratio 0.55 due to the fact that the former system supports the narrower pulse with the larger difference between velocities of neighboring particles. The investigated chains demonstrated different wave structure at zero dissipation and at intermediate damping coefficients and the similar behavior at large damping.
△ Less
Submitted 16 April, 2015;
originally announced April 2015.
-
Major steps in the discovery of adiabatic shear bands
Authors:
Bradley Dodd,
Stephen M. Walley,
Rong Yang,
Vitali F. Nesterenko
Abstract:
The ASB phenomenon was first described by Russian researchers in 1928 and 1935. Translations of both papers are included.
The ASB phenomenon was first described by Russian researchers in 1928 and 1935. Translations of both papers are included.
△ Less
Submitted 6 October, 2014;
originally announced October 2014.
-
Multiscale tunability of solitary wave dynamics in tensegrity metamaterials
Authors:
Fernando Fraternali,
Gerardo Carpentieri,
Ada Amendola,
Robert E. Skelton,
Vitali F. Nesterenko
Abstract:
A new class of strongly nonlinear metamaterials based on tensegrity concepts is proposed and the solitary wave dynamics under impact loading is investigated. Such systems can be tuned into elastic hardening or elastic softening regimes by adjusting local and global prestress. In the softening regime these metamaterials are able to transform initially compression pulse into a solitary rarefaction w…
▽ More
A new class of strongly nonlinear metamaterials based on tensegrity concepts is proposed and the solitary wave dynamics under impact loading is investigated. Such systems can be tuned into elastic hardening or elastic softening regimes by adjusting local and global prestress. In the softening regime these metamaterials are able to transform initially compression pulse into a solitary rarefaction wave followed by oscillatory tail with progressively decreasing amplitude. Interaction of a compression solitary pulse with an interface between elastically hardening and softening materials having correspondingly low-high acoustic impedances demonstrates anomalous behavior: a train of reflected compression solitary waves in the low impedance material; and a transmitted solitary rarefaction wave with oscillatory tail in high impedance material. The interaction of a rarefaction solitary wave with an interface between elastically softening and elastically hardening materials with high-low impedances also demonstrates anomalous behavior: a reflected solitary rarefaction wave with oscillatory tail in the high impedance branch; and a delayed train of transmitted compression solitary pulses in the low impedance branch. These anomalous impact transformation properties may allow for the design of ultimate impact mitigation devices without relying on energy dissipation.
△ Less
Submitted 16 October, 2014; v1 submitted 24 September, 2014;
originally announced September 2014.
-
Transmission and reflection of strongly nonlinear solitary waves at granular interfaces
Authors:
A. M. Tichler,
L. R. Gomez,
N. Upadhyaya,
X. Campman,
V. F. Nesterenko,
V. Vitelli
Abstract:
The interaction of a solitary wave front with an interface formed by two strongly-nonlinear non-cohesive granular lattices displays rich behaviour, characterized by the breakdown of continuum equations of motion in the vicinity of the interface. By treating the solitary wave as a quasiparticle with an effective mass, we construct an intuitive (energy and linear momentum conserving) discrete model…
▽ More
The interaction of a solitary wave front with an interface formed by two strongly-nonlinear non-cohesive granular lattices displays rich behaviour, characterized by the breakdown of continuum equations of motion in the vicinity of the interface. By treating the solitary wave as a quasiparticle with an effective mass, we construct an intuitive (energy and linear momentum conserving) discrete model to predict the amplitudes of the transmitted solitary waves generated when an incident solitary wave front, parallel to the interface, moves from a denser to a lighter granular hexagonal lattice. Our findings are corroborated with simulations. We then successfully extend this model to oblique interfaces, where we find that the angle of refraction and reflection of a solitary wave follows, below a critical value, an analogue of Snell's law in which the solitary wave speed replaces the speed of sound, which is zero in the sonic vacuum.
△ Less
Submitted 23 March, 2013;
originally announced March 2013.
-
Mechanisms of fragmentation of Al-W granular composites under dynamic loading
Authors:
K. L. Olney,
V. F. Nesterenko,
D. J. Benson
Abstract:
Numerical simulations of Aluminum (Al) and Tungsten (W) granular composite rings under various dynamic loading conditions caused by explosive loading were examined. Three competing mechanisms of fragmentation were observed: a continuum level mechanism generating large macrocracks described by the Grady-Kipp fragmentation mechanism, a mesoscale mechanism generating voids and microcracks near the in…
▽ More
Numerical simulations of Aluminum (Al) and Tungsten (W) granular composite rings under various dynamic loading conditions caused by explosive loading were examined. Three competing mechanisms of fragmentation were observed: a continuum level mechanism generating large macrocracks described by the Grady-Kipp fragmentation mechanism, a mesoscale mechanism generating voids and microcracks near the initially unbonded Al/W interfaces due to tensile strains, and a mesoscale jetting due to the development of large velocity gradients between the W particles and adjacent Al. These mesoscale mechanisms can be used to tailor the size of the fragments by selecting an appropriate initial mesostructure for a given loading condition.
△ Less
Submitted 29 February, 2012; v1 submitted 15 February, 2012;
originally announced February 2012.
-
Role of material properties and mesostructure on dynamic deformation and shear instability in Al-W granular composites
Authors:
K. L. Olney,
P. H. Chiu,
C. W. Lee,
V. F. Nesterenko,
D. J. Benson
Abstract:
Dynamic experiments with Al-W granular/porous composites revealed qualitatively different behavior with respect to shear localization depending on bonding between Al particles. Two-dimensional numerical modeling was used to explore the mesomechanics of the large strain dynamic deformation in Al-W granular/porous composites and explain the experimentally observed differences in shear localization b…
▽ More
Dynamic experiments with Al-W granular/porous composites revealed qualitatively different behavior with respect to shear localization depending on bonding between Al particles. Two-dimensional numerical modeling was used to explore the mesomechanics of the large strain dynamic deformation in Al-W granular/porous composites and explain the experimentally observed differences in shear localization between composites with various mesostructures. Specifically, the bonding between the Al particles, the porosity, the roles of the relative particle sizes of Al and W, the arrangements of the W particles, and the material properties of Al were investigated using numerical calculations. It was demonstrated in simulations that the bonding between the "soft" Al particles facilitated shear localization as seen in the experiments. Numerical calculations and experiments revealed that the mechanism of the shear localization in granular composites is mainly due to the local high strain flow of "soft" Al around the "rigid" W particles causing localized damage accumulation and subsequent growth of the meso/macro shear bands/cracks. The "rigid" W particles were the major geometrical factor determining the initiation and propagation of "kinked" shear bands in the matrix of "soft" Al particles, leaving some areas free of extensive plastic deformation as observed in experiments and numerical calculations.
△ Less
Submitted 24 May, 2011;
originally announced May 2011.
-
Propagation of Rarefaction Pulses in Discrete Materials with Strain-Softening Behavior
Authors:
Eric B Herbold,
Vitali F Nesterenko
Abstract:
Discrete materials composed of masses connected by strongly nonlinear links with anomalous behavior (reduction of elastic modulus with strain) have very interesting wave dynamics. Such links may be composed of materials exhibiting repeatable softening behavior under loading and unloading. These discrete materials will not support strongly nonlinear compression pulses due to nonlinear dispersion bu…
▽ More
Discrete materials composed of masses connected by strongly nonlinear links with anomalous behavior (reduction of elastic modulus with strain) have very interesting wave dynamics. Such links may be composed of materials exhibiting repeatable softening behavior under loading and unloading. These discrete materials will not support strongly nonlinear compression pulses due to nonlinear dispersion but may support stationary rarefaction pulses or rarefaction shock-like waves. Here we investigate rarefaction waves in nonlinear periodic systems with a general power-law relationship between force and displacement $F \propto δ^{n}$, where $0 < n < 1$. An exact solution of the long-wave approximation is found for the special case of $n = 1/2$, which agrees well with numerical results for the discrete chain. Theoretical and numerical analysis of stationary solutions are discussed for different values of $n$ in the interval $0 < n < 1$. The leading solitary rarefaction wave followed by a dispersive tail was generated by impact in numerical calculations.
△ Less
Submitted 25 August, 2010;
originally announced August 2010.
-
Short Pulse Dynamics in Strongly Nonlinear Dissipative Granular Chains
Authors:
Alexandre Rosas,
Aldo H. Romero,
Vitali F. Nesterenko,
Katja Lindenberg
Abstract:
We study the energy decay properties of a pulse propagating in a strongly nonlinear granular chain with damping proportional to the relative velocity of the grains. We observe a wave disturbance that at low viscosities consists of two parts exhibiting two entirely different time scales of dissipation. One part is an attenuating solitary wave, is dominated by discreteness and nonlinearity effects…
▽ More
We study the energy decay properties of a pulse propagating in a strongly nonlinear granular chain with damping proportional to the relative velocity of the grains. We observe a wave disturbance that at low viscosities consists of two parts exhibiting two entirely different time scales of dissipation. One part is an attenuating solitary wave, is dominated by discreteness and nonlinearity effects as in a dissipationless chain, and has the shorter lifetime. The other is a purely dissipative shocklike structure with a much longer lifetime and exists only in the presence of dissipation. The range of viscosities and initial configurations that lead to this complex wave disturbance are explored.
△ Less
Submitted 4 August, 2008;
originally announced August 2008.
-
Tunable frequency band-gap and pulse propagation in a strongly nonlinear diatomic chain
Authors:
E. B. Herbold,
J. Kim,
V. F. Nesterenko,
S. Wang,
C. Daraio
Abstract:
One-dimensional nonlinear phononic crystals have been assembled from periodic diatomic chains of stainless steel cylinders alternated with Polytetrafluoroethylene (PTFE) spheres. We report the presence of acoustic band gaps in the dispersion relation of the linearized systems and study the transformation of single and multiple pulses in linear, nonlinear and strongly nonlinear regimes with numer…
▽ More
One-dimensional nonlinear phononic crystals have been assembled from periodic diatomic chains of stainless steel cylinders alternated with Polytetrafluoroethylene (PTFE) spheres. We report the presence of acoustic band gaps in the dispersion relation of the linearized systems and study the transformation of single and multiple pulses in linear, nonlinear and strongly nonlinear regimes with numerical calculations and experiments. The limiting frequencies of the band gap are within the audible frequency range (20-20,000 Hz) and can be tuned by varying the particle's material properties, mass and initial compression. Pulses rapidly transform within very short distances from the impacted end due to the influence of the band gap in the linear and in nonlinear elastic chains. The effects of an in situ band gap created by a mean dynamic compression are observed in the strongly nonlinear wave regime.
△ Less
Submitted 25 June, 2008;
originally announced June 2008.
-
Particle size effect on strength, failure and shock behavior in Polytetrafluoroethylene-Al-W granular composites
Authors:
E. B. Herbold,
V. F. Nesterenko,
D. J. Benson,
J. Cai,
K. S. Vecchio,
F. Jiang,
J. W. Addiss,
S. M. Walley,
W. G. Proud
Abstract:
The variation of metallic particle size and sample porosity significantly alters the dynamic mechanical properties of high density granular composites processed using a cold isostatically pressed mixture of polytetrafluoroethylene (PTFE), aluminum (Al) and tungsten (W) powders. Quasi-static and dynamic experiments are performed with identical constituent mass fractions with variations in the siz…
▽ More
The variation of metallic particle size and sample porosity significantly alters the dynamic mechanical properties of high density granular composites processed using a cold isostatically pressed mixture of polytetrafluoroethylene (PTFE), aluminum (Al) and tungsten (W) powders. Quasi-static and dynamic experiments are performed with identical constituent mass fractions with variations in the size of the W particles and pressing conditions. The relatively weak polymer matrix allows the strength and fracture modes of this material to be governed by the granular type behavior of agglomerated metal particles. A higher ultimate compressive strength was observed in relatively high porosity samples with small W particles compared to those with coarse W particles in all experiments. Mesoscale granular force chains comprised of the metallic particles explain this unusual phenomenon as observed in a hydrocode simulation of a drop-weight test. Macrocracks forming below the critical failure strain for the matrix and unusual behavior due to a competition between densification and fracture in dynamic tests of porous samples were also observed. Shock loading of this granular composite resulted in higher fraction of total internal energy deposition in the soft PTFE matrix, specifically thermal energy, which can be tailored by the W particle size distribution.
△ Less
Submitted 10 June, 2008;
originally announced June 2008.
-
High Strain and Strain-Rate Behaviour of PTFE/Aluminium/Tungsten Mixtures
Authors:
John Addiss,
Jing Cai,
Stephen Walley,
William Proud,
Vitali F. Nesterenko
Abstract:
Conventional drop-weight techniques were modified to accommodate low-amplitude force transducer signals from low-strength, cold isostatically pressed 'heavy' composites of polytetrafluoroethylene, aluminum and tungsten. The failure strength, strain and the post-critical behavior of failed samples were measured for samples of different porosity and tungsten grain size. Unusual phenomenon of signi…
▽ More
Conventional drop-weight techniques were modified to accommodate low-amplitude force transducer signals from low-strength, cold isostatically pressed 'heavy' composites of polytetrafluoroethylene, aluminum and tungsten. The failure strength, strain and the post-critical behavior of failed samples were measured for samples of different porosity and tungsten grain size. Unusual phenomenon of significantly higher strength (55 MPa) of porous composites (density 5.9 g/cc) with small W particles (less than 1 micron) in comparison with strength (32 MPa) of dense composites (7.1 g/cc) with larger W particles (44 microns) at the same volume content of components was observed. This is attributed to force chains created by a network of small W particles. Interrupted tests at different levels of strain revealed the mechanisms of fracture under dynamic compression.
△ Less
Submitted 7 November, 2007;
originally announced November 2007.
-
The influence of metallic particle size on the mechanical properties of PTFE-Al-W powder composites
Authors:
J. Cai,
V. F. Nesterenko,
K. S. Vecchio,
E. B. Herbold,
D. J. Benson,
F. Jiang,
J. W. Addiss,
S. M. Walley,
W. G. Proud
Abstract:
The dynamic mechanical properties of reactive materials (e.g., high density mixtures of polytetraflouroethylene (PTFE), aluminum (Al) and tungsten (W) powders) can be tailored by changing the morphology of the particles and porosity. Cold isostatically pressed PTFE-Al-W powder composites with fine metallic particles and a higher porosity exhibited higher ultimate compressive strength than less p…
▽ More
The dynamic mechanical properties of reactive materials (e.g., high density mixtures of polytetraflouroethylene (PTFE), aluminum (Al) and tungsten (W) powders) can be tailored by changing the morphology of the particles and porosity. Cold isostatically pressed PTFE-Al-W powder composites with fine metallic particles and a higher porosity exhibited higher ultimate compressive strength than less porous composites having equivalent mass ratios with coarse W particles. The mesoscale force chains between the fine metallic particles are responsible for this unusual phenomenon. We observed macrocracks below the critical failure strain for the matrix and a competition between densification and fracture in some porous samples in dynamic tests.
△ Less
Submitted 13 September, 2007;
originally announced September 2007.
-
Simulation of Particle Size Effect on Dynamic Properties and Fracture of PTFE-W-Al Composites
Authors:
E. B. Herbold,
J. Cai,
D. J. Benson,
V. F. Nesterenko
Abstract:
Recent investigations of the dynamic compressive strength of cold isostatically pressed composites of polytetrafluoroethylene (PTFE), tungsten (W) and aluminum (Al) powders show significant differences depending on the size of metallic particles. The addition of W increases the density and overall strength of the sample. To investigate relatively large deformations multi-material Eulerian and ar…
▽ More
Recent investigations of the dynamic compressive strength of cold isostatically pressed composites of polytetrafluoroethylene (PTFE), tungsten (W) and aluminum (Al) powders show significant differences depending on the size of metallic particles. The addition of W increases the density and overall strength of the sample. To investigate relatively large deformations multi-material Eulerian and arbitrary Lagrangian-Eulerian methods, which have the ability to efficiently handle the formation of free surfaces, were used. The calculations indicate that the increased strength of the sample with fine metallic particles is due to the formation of force chains under dynamic loading. This phenomenon occurs even at larger porosity of the PTFE matrix in comparison with samples with larger particle size of W and higher density of the PTFE matrix.
△ Less
Submitted 8 August, 2007;
originally announced August 2007.
-
Solitary and shock waves in discrete double power-law materials
Authors:
E. B. Herbold,
V. F. Nesterenko
Abstract:
A novel strongly nonlinear laminar metamaterial supporting new types of solitary and shock waves with impact energy mitigating capabilities is presented. It consists of steel plates with intermittent polymer toroidal rings acting as strongly nonlinear springs with large allowable strain. Their force-displacement relationship is described by the addition of two power-law relationships resulting i…
▽ More
A novel strongly nonlinear laminar metamaterial supporting new types of solitary and shock waves with impact energy mitigating capabilities is presented. It consists of steel plates with intermittent polymer toroidal rings acting as strongly nonlinear springs with large allowable strain. Their force-displacement relationship is described by the addition of two power-law relationships resulting in a solitary wave speed and width depending on the amplitude. This double nonlinearity allows splitting of an initial impulse into two separate strongly nonlinear solitary wave trains. Solitary and shock waves are observed experimentally and analyzed numerically in an assembly with Teflon o-rings.
△ Less
Submitted 24 August, 2007; v1 submitted 24 April, 2007;
originally announced April 2007.
-
Observation of two-wave structure in strongly nonlinear dissipative granular chains
Authors:
Alexandre Rosas,
Aldo H. Romero,
Vitali F. Nesterenko,
Katja Lindenberg
Abstract:
In a strongly nonlinear viscous granular chain under conditions of loading that exclude stationary waves (e.g., impact by a single grain) we observe a pulse that consists of two interconnected but distinct parts. One is a leading narrow "primary pulse" with properties similar to a solitary wave in a "sonic vacuum." It arises from strong nonlinearity and discreteness in the absence of dissipation…
▽ More
In a strongly nonlinear viscous granular chain under conditions of loading that exclude stationary waves (e.g., impact by a single grain) we observe a pulse that consists of two interconnected but distinct parts. One is a leading narrow "primary pulse" with properties similar to a solitary wave in a "sonic vacuum." It arises from strong nonlinearity and discreteness in the absence of dissipation, but now decays due to viscosity. The other is a broad, much more persistent shock-like "secondary pulse" trailing the primary pulse and caused by viscous dissipation. The medium behind the primary pulse is transformed from a "sonic vacuum" to a medium with finite sound speed. When the rapidly decaying primary pulse dies, the secondary pulse continues to propagate in the "sonic vacuum," with an oscillatory front if the viscosity is relatively small, until its eventual (but very slow) disintegration. Beyond a critical viscosity there is no separation of the two pulses, and the dissipation and nonlinearity dominate the shock-like attenuating pulse which now exhibits a nonoscillatory front.
△ Less
Submitted 23 August, 2006;
originally announced August 2006.
-
Shock Wave Structure in a Strongly Nonlinear Granular Lattice with Viscous Dissipation
Authors:
E. B. Herbold,
V. F. Nesterenko
Abstract:
The shock wave structure in a one-dimensional lattice (e.g. granular chain) with a power law dependence of force on displacement between particles with viscous dissipation is considered and compared to the corresponding long wave approximation. A dissipative term depending on the relative velocity between neighboring particles is included in the discrete model to investigate its influence on the…
▽ More
The shock wave structure in a one-dimensional lattice (e.g. granular chain) with a power law dependence of force on displacement between particles with viscous dissipation is considered and compared to the corresponding long wave approximation. A dissipative term depending on the relative velocity between neighboring particles is included in the discrete model to investigate its influence on the shape of steady shock profiles. The critical viscosity coefficient is obtained from the long-wave approximation for arbitrary values of the exponent n and denotes the transition from an oscillatory to a monotonic shock profile in stronly nonlinear systems. The expression for the critical viscosity coefficient converges to the known equation for the critical viscosity in the weakly nonlinear case. Values of viscosity based on this expression are comparable to the values obtained in the numerical analysis of a discrete particle lattice with a Herzian contact interaction corresponding to n = 3/2. An initial disturbance in a discrete system approaches a stationary shock profile after traveling a short distance that is comparable to the width of the leading pulse of a stationary shock front. The shock front width is minimized when the viscosity is equal to its critical value.
△ Less
Submitted 7 July, 2006;
originally announced July 2006.
-
Influence of Controlled Viscous Dissipation on the Propagation of Strongly Nonlinear Waves in Stainless Steel Based Phononic Crystals
Authors:
E. B. Herbold,
V. F. Nesterenko,
C. Daraio
Abstract:
Strongly nonlinear phononic crystals were assembled from stainless steel spheres. Single solitary waves and splitting of an initial pulse into a train of solitary waves were investigated in different viscous media using motor oil and non-aqueous glycerol to introduce a controlled viscous dissipation. Experimental results indicate that the presence of a viscous fluid dramatically altered the spli…
▽ More
Strongly nonlinear phononic crystals were assembled from stainless steel spheres. Single solitary waves and splitting of an initial pulse into a train of solitary waves were investigated in different viscous media using motor oil and non-aqueous glycerol to introduce a controlled viscous dissipation. Experimental results indicate that the presence of a viscous fluid dramatically altered the splitting of the initial pulse into a train of solitary waves. Numerical simulations qualitatively describe the observed phenomena only when a dissipative term based on the relative velocity between particles is introduced.
△ Less
Submitted 22 December, 2005; v1 submitted 15 December, 2005;
originally announced December 2005.
-
Strongly nonlinear wave dynamics in a chain of polymer coated beads
Authors:
C. Daraio,
V. F. Nesterenko
Abstract:
Strongly nonlinear phononic crystals were assembled from a chain of Parylene-C coated steel spheres in a polytetrafluoroethylene (PTFE) holder. This system exhibits strongly nonlinear properties and extends the range of materials supporting "sonic vacuum" type behavior. The combination of a high density core and a soft (low elastic modulus) coating ensures a relatively low velocity of wave propa…
▽ More
Strongly nonlinear phononic crystals were assembled from a chain of Parylene-C coated steel spheres in a polytetrafluoroethylene (PTFE) holder. This system exhibits strongly nonlinear properties and extends the range of materials supporting "sonic vacuum" type behavior. The combination of a high density core and a soft (low elastic modulus) coating ensures a relatively low velocity of wave propagation. The beads contact interaction caused by the deformation of the Parylene coating can be described as classical nonlinear Hertz theory despite the viscoelastic nature of the polymer and the high strain rate deformation of the contact area. Strongly nonlinear solitary waves excited by impacts were investigated experimentally and compared to chains composed of uniform steel beads. Fracture of the polumer coating was detected under relatively large pulse amplitude.
△ Less
Submitted 4 October, 2005;
originally announced October 2005.
-
Energy trapping and shock disintegration in a composite granular medium
Authors:
C. Daraio,
V. F. Nesterenko,
E. B. Herbold,
S. Jin
Abstract:
Granular materials demonstrate a strongly nonlinear behavior influencing the wave propagation in the medium. We report the first experimental observation of impulse energy confinement and the resultant disintegration of shock and solitary waves. The medium consists of alternating ensambles of high-modulus vs orders of magnitude lower modulus chains of different masses. The trapped energy is cont…
▽ More
Granular materials demonstrate a strongly nonlinear behavior influencing the wave propagation in the medium. We report the first experimental observation of impulse energy confinement and the resultant disintegration of shock and solitary waves. The medium consists of alternating ensambles of high-modulus vs orders of magnitude lower modulus chains of different masses. The trapped energy is contained within the "softer" portions of the composite chain and is slowly released in the form of weak, separated pulses over an extended period of time. This effect is enhanced by using a specific group assembly and superimposed force.
△ Less
Submitted 23 September, 2005;
originally announced September 2005.
-
Tunability of solitary wave properties in one dimensional strongly nonlinear phononic crystals
Authors:
C. Daraio,
V. F. Nesterenko,
E. B. Herbold,
S. Jin
Abstract:
One dimentional strongly nonlinear phononic crystals were assembled from chains of PTFE (polytetrafluoroethylene) and stainless steel spheres with gauges installed inside the beads. Trains of strongly nonlinear solitary waves were excited by an impact. A significant modification of the signal shape and an increase of solitary wave speed up to two times (at the same amplitude of dynamic contact f…
▽ More
One dimentional strongly nonlinear phononic crystals were assembled from chains of PTFE (polytetrafluoroethylene) and stainless steel spheres with gauges installed inside the beads. Trains of strongly nonlinear solitary waves were excited by an impact. A significant modification of the signal shape and an increase of solitary wave speed up to two times (at the same amplitude of dynamic contact force)were achieved through a noncontact magnetically induced precompression of the chains. Data for PTFE based chains are presented for the first time and data for stainless steel based chains were extended into a smaller range of amplitudes by more than one order of magnitude than previously reported. Experimental results were found to be in reasonable agreement with the long wave approximation and with numerical calculations based on Hertz interaction law for discrete chains.
△ Less
Submitted 20 June, 2005;
originally announced June 2005.
-
Anomalous wave reflection from the interface of two strongly nonlinear granular media
Authors:
V. F. Nesterenko,
C. Daraio,
E. B. Herbold,
S. Jin
Abstract:
Granular materials exhibit a strongly nonlinear behaviour affecting the propagation of information in the medium. Dynamically self-organized strongly nonlinear solitary waves are the main information carriers in granular chains. Here we report the first experimental observation of the dramatic change of reflectivity from the interface of two granular media triggered by a noncontact magnetically…
▽ More
Granular materials exhibit a strongly nonlinear behaviour affecting the propagation of information in the medium. Dynamically self-organized strongly nonlinear solitary waves are the main information carriers in granular chains. Here we report the first experimental observation of the dramatic change of reflectivity from the interface of two granular media triggered by a noncontact magnetically induced initial precompression. It may be appropriate to name this phenomenon the "acoustic diode" effect. Based on numerical simulations, we explain this effect by the high gradient of particle velocity near the interface.
△ Less
Submitted 14 June, 2005;
originally announced June 2005.
-
Strongly nonlinear waves in a chain of Teflon beads
Authors:
C. Daraio,
V. F. Nesterenko,
E. Herbold,
S. Jin
Abstract:
One dimensional "sonic vacuum" type phononic crystals were assembled from a chain of Teflon spheres with different diameters in a Teflon holder. It was demonstrated for the first time that this polymer-based "sonic vacuum", with exceptionally low elastic modulus of particles, supports propagation of strongly nonlinear solitary waves with a very low speed.
One dimensional "sonic vacuum" type phononic crystals were assembled from a chain of Teflon spheres with different diameters in a Teflon holder. It was demonstrated for the first time that this polymer-based "sonic vacuum", with exceptionally low elastic modulus of particles, supports propagation of strongly nonlinear solitary waves with a very low speed.
△ Less
Submitted 11 March, 2005;
originally announced March 2005.
-
Large field generation with Hot Isostatically Pressed Powder-in-Tube MgB2 coil at 25 K
Authors:
A. Serquis,
L. Civale,
J. Y. Coulter,
D. L. Hammon,
X. Z. Liao,
Y. T. Zhu,
D. E. Peterson,
F. M. Mueller,
V. F. Nesterenko,
S. S. Indrakanti
Abstract:
We present the fabrication and test results of Hot-Isostatic-Pressed (HIPed) Powder-in-Tube (PIT) MgB$_2$ coils. The coils properties were measured by transport and magnetization at different applied fields ($H$) and temperatures ($T$). The engineering critical current ($J_e$) value is the largest reported in PIT MgB$_2$ wires or tapes. At 25 K our champion 6-layer coil was able to generate a fi…
▽ More
We present the fabrication and test results of Hot-Isostatic-Pressed (HIPed) Powder-in-Tube (PIT) MgB$_2$ coils. The coils properties were measured by transport and magnetization at different applied fields ($H$) and temperatures ($T$). The engineering critical current ($J_e$) value is the largest reported in PIT MgB$_2$ wires or tapes. At 25 K our champion 6-layer coil was able to generate a field of 1 T at self-field ($I_c >$ 220 A, $J_e \sim 2.8 \times 10^4$ A/cm$^2$). At 4 K this coil generated 1.6 T under an applied field of 1.25 T ($I_c \sim350$ A, $J_e \sim 4.5 \times 10^4$ A/cm$^2$). These magnetic fields are high enough for a superconducting transformer or magnet applications such as MRI. A SiC doped MgB$_2$ single layer coil shows a promising improvement at high fields and exhibits $J_c > 10^4$ A/cm$^2$ at 7 T.
△ Less
Submitted 23 April, 2004; v1 submitted 2 April, 2004;
originally announced April 2004.
-
RF Surface Resistance of a HIPped MgB2 Sample at 21 GHz
Authors:
T. Tajima,
F. L. Krawczyk,
J. Liu,
D. C. Nguyen,
D. L. Schrage,
A. Serquis,
A. H. Shapiro,
V. F. Nesterenko,
Y. Gu
Abstract:
Magnesium diboride (MgB2) is attractive for RF cavity application for particle accelerators because it might not show an increase of RF surface losses at high magnetic surface fields, a phenomenon that has prevented high-Tc superconducting materials such as YBCO from being used for this application. We have measured the RF surface resistance (Rs) at 21 GHz of a MgB2 sample fabricated using Hot I…
▽ More
Magnesium diboride (MgB2) is attractive for RF cavity application for particle accelerators because it might not show an increase of RF surface losses at high magnetic surface fields, a phenomenon that has prevented high-Tc superconducting materials such as YBCO from being used for this application. We have measured the RF surface resistance (Rs) at 21 GHz of a MgB2 sample fabricated using Hot Isostatic Press (HIP) at 200 MPa and 1000 C. The results show that polishing with 0.1-micron diamond lapping film followed by a 1500-psi DI water rinse in a clean room reduced the Rs by a factor of 6.2 at 15 K and it is the lowest compared to other published data. The Rs data near the lowest temperature (~13 K) scatter between 0.6 and 1.3 mOhm. The penetration depth and energy gap were estimated to be 263 nm and 1.9-2.7, respectively, for the polished surface.
△ Less
Submitted 9 October, 2003;
originally announced October 2003.
-
Shock (Blast) Mitigation by "Soft" Condensed Matter
Authors:
Vitali F. Nesterenko
Abstract:
It is a common point that "soft" condensed matter (like granular materials or foams) can reduce damage caused by impact or explosion. It is attributed to their ability to absorb significant energy. This is certainly the case for a quasistatic type of deformation at low velocity of impact where such materials are widely used for packing of fragile devices. At the same time a mitigation of blast p…
▽ More
It is a common point that "soft" condensed matter (like granular materials or foams) can reduce damage caused by impact or explosion. It is attributed to their ability to absorb significant energy. This is certainly the case for a quasistatic type of deformation at low velocity of impact where such materials are widely used for packing of fragile devices. At the same time a mitigation of blast phenomena must take into account shock wave properties of "soft" matter which very often exhibit highly nonlinear, highly heterogeneous and dissipative behavior. This paper considers applications of "soft" condensed matter for blast mitigation using simplified approach, presents analysis of some anomalous effects and suggestions for future research in this exciting area.
△ Less
Submitted 24 August, 2007; v1 submitted 18 March, 2003;
originally announced March 2003.
-
Microwave performance of high-density bulk MgB2
Authors:
A. T. Findikoglu,
A. Serquis,
L. Civale,
X. Z. Liao,
Y. T. Zhu,
M. E. Hawley,
F. M. Mueller,
V. F. Nesterenko,
Y. Gu
Abstract:
We have performed microwave measurements on superconducting hot-isostatically- pressed (HIPed) bulk MgB2 using a parallel-plate resonator technique. The high density and strength of the HIPed material allowed preparation of samples with mirror-like surfaces for microwave measurements. The microwave surface resistance decreased by about 40% at 20 K when the root-mean-square surface roughness was…
▽ More
We have performed microwave measurements on superconducting hot-isostatically- pressed (HIPed) bulk MgB2 using a parallel-plate resonator technique. The high density and strength of the HIPed material allowed preparation of samples with mirror-like surfaces for microwave measurements. The microwave surface resistance decreased by about 40% at 20 K when the root-mean-square surface roughness was reduced from 220 nm to 110 nm through surface-polishing and ion-milling. The surface resistance was independent of surface microwave magnetic field at least up to 4 Oe and below 30 K. We attribute this behavior, and the overall low surface resistance (~0.8 mOhms at 10 GHz and 20 K), to the high density of our samples and the absence of weak links between grains.
△ Less
Submitted 14 March, 2003;
originally announced March 2003.
-
Hot isostatic pressing of powder in tube MgB2 wires
Authors:
A. Serquis,
L. Civale,
D. L. Hammon,
X. Z. Liao,
J. Y. Coulter,
Y. T. Zhu,
M. Jaime,
D. E. Peterson,
F. M. Mueller,
V. F. Nesterenko,
Y. Gu
Abstract:
The critical current density (Jc) of hot isostatic pressed (HIPed) MgB2 wires, measured by d.c. transport and magnetization, is compared with that of similar wires annealed at ambient pressure. The HIPed wires have a higher Jc than the annealed wires, especially at high temperatures and magnetic fields, and higher irreversibility field (Hirr). The HIPed wires are promising for applications, with…
▽ More
The critical current density (Jc) of hot isostatic pressed (HIPed) MgB2 wires, measured by d.c. transport and magnetization, is compared with that of similar wires annealed at ambient pressure. The HIPed wires have a higher Jc than the annealed wires, especially at high temperatures and magnetic fields, and higher irreversibility field (Hirr). The HIPed wires are promising for applications, with Jc>106 A/cm2 at 5 K and zero field and >104 A/cm2 at 1.5 T and 26.5 K, and Hirr ~ 17 T at 4 K. The improvement is attributed to a high density of structural defects, which are the likely source of vortex pinning. These defects, observed by transmission electron microscopy, include small angle twisting, tilting, and bending boundaries, resulting in the formation of sub-grains within MgB2 crystallites.
△ Less
Submitted 3 March, 2003;
originally announced March 2003.
-
Defect structures in MgB2 wires introduced by hot isostatic pressing
Authors:
X. Z. Liao,
A. Serquis,
Y. T. Zhu,
L. Civale,
D. L. Hammon,
D. E. Peterson,
F. M. Mueller,
V. F. Nesterenko,
Y. Gu
Abstract:
The microstructures of MgB2 wires prepared by the powder-in-tube technique and subsequent hot isostatic pressing were investigated using transmission electron microscopy. Large amount of crystalline defects including small angle twisting, tilting, and bending boundaries, in which high densities of dislocations reside, were found forming sub-grains within MgB2 grains. It is believed that these de…
▽ More
The microstructures of MgB2 wires prepared by the powder-in-tube technique and subsequent hot isostatic pressing were investigated using transmission electron microscopy. Large amount of crystalline defects including small angle twisting, tilting, and bending boundaries, in which high densities of dislocations reside, were found forming sub-grains within MgB2 grains. It is believed that these defects resulted from particle deformation during the hot isostatic pressing process and are effective flux pinning centers that contribute to the high critical current densities of the wires at high temperatures and at high fields.
△ Less
Submitted 1 March, 2003;
originally announced March 2003.
-
Elastic properties of hot isostatically pressed magnesium diboride
Authors:
V. F. Nesterenko,
Y. Gu
Abstract:
Powder of magnesium diboride was hot isostatically pressed using three qualitatively different cycles: cooling under pressure (DMCUP), "standard" cycle with pressure and temperature reduced simultaneously and isothermal presure release. Elastic properties of dense material were measured at normal conditions using resonant ultrasound specroscopy (RUS) method. The highest value of density (2.66 g/…
▽ More
Powder of magnesium diboride was hot isostatically pressed using three qualitatively different cycles: cooling under pressure (DMCUP), "standard" cycle with pressure and temperature reduced simultaneously and isothermal presure release. Elastic properties of dense material were measured at normal conditions using resonant ultrasound specroscopy (RUS) method. The highest value of density (2.66 g/cc) and elastic moduli (Young's modulus 273.5 GPa, bulk modulus 143.9 GPa, Poisson's ratio 0.183) correspond to the sample processed using DMCUP cycle. These data agree very well with some theoretical predictions based on quantum mechanics calculations. Effect of lower density on elastic constants is consistent with theoretical approach based on elasticity theory taking into account effect of low porosity.
△ Less
Submitted 18 March, 2003; v1 submitted 24 December, 2002;
originally announced December 2002.
-
Bulk Magnesium Diboride, Mechanical and Superconducting Properties
Authors:
Vitali F. Nesterenko
Abstract:
Hot Isostatic Pressing was applied to synthesize bulk samples with diameter up to 30 mm starting with Alfa Aesar magnesium diboride powder. HIPing at 2 kbar, 1000 C with cooling under pressure (DMCUP cycle) resulted in a fully dense (or low porosity) material with a sharp superconducting transition and critical current comparable with the best reported. Elastic constants were measured using meth…
▽ More
Hot Isostatic Pressing was applied to synthesize bulk samples with diameter up to 30 mm starting with Alfa Aesar magnesium diboride powder. HIPing at 2 kbar, 1000 C with cooling under pressure (DMCUP cycle) resulted in a fully dense (or low porosity) material with a sharp superconducting transition and critical current comparable with the best reported. Elastic constants were measured using method of resonant ultrasound spectroscopy. Their values for most dense samples (bulk modulus 142.5 GPa and Young's modulus 272.5 GPa) are close to theoretically predicted values for solid magnesium diboride. Porosity is resposible for lower values of elastic constants. Fracture toughness is evaluated based on measurements of microhardness and elastic constants. Upper critical field and irreversibility field are comparable with data for samples sintered at 3 GPa. Microstructural propeties of HIPed smaples are responsible for enhanced flux pinning. Method allows scaling of the size of the samples and manufacture of complex shapes.
△ Less
Submitted 20 December, 2002;
originally announced December 2002.
-
The degradation of MgB2 under ambient environment
Authors:
A. Serquis,
Y. T. Zhu,
D. E. Peterson,
F. M. Mueller,
R. K. Schulze,
V. F. Nesterenko,
S. S. Indrakanti
Abstract:
The superconductivities of samples prepared by several procedures were found to degrade under ambient environment. The degradation mechanism was studied by measuring the change of surface chemical composition of dense MgB2 pellets (prepared by hot isostatic pressure, HIPed) under atmospheric exposure using X-ray Photoelectron Spectroscopy (XPS). Results showed that samples with poor connectivity…
▽ More
The superconductivities of samples prepared by several procedures were found to degrade under ambient environment. The degradation mechanism was studied by measuring the change of surface chemical composition of dense MgB2 pellets (prepared by hot isostatic pressure, HIPed) under atmospheric exposure using X-ray Photoelectron Spectroscopy (XPS). Results showed that samples with poor connectivity between grains and with smaller grain sizes degrade with time when exposed to ambient conditions. In these samples, the Tc did not change with time, but the superconducting transition became broader and the Meissner fraction decreased. In contrast, our well-sintered and the HIPed samples remained stable for several months under ambient condition. The degradation was found to be related to surface decomposition as observed by XPS. We observed the formation of oxidized Mg, primarily in the form of a Mg hydroxide, the increase of C and O contents, and the reduction of B concentration in the surface layer of MgB2 samples.
△ Less
Submitted 25 June, 2002;
originally announced June 2002.
-
The influence of microstructures and crystalline defects on the superconductivity of MgB2
Authors:
A. Serquis,
X. Y. Liao,
Y. T. Zhu,
J. Y. Coulter,
J. Y. Huang,
J. O. Willis,
D. E. Peterson,
F. M. Mueller,
N. O. Moreno,
J. D. Thompson,
S. S. Indrakanti,
V. F. Nesterenko
Abstract:
This work studies the influence of microstructures and crystalline defects on the superconductivity of MgB2, with the objective to improve its flux pinning. A MgB2 sample pellet that was hot isostatic pressed (HIPed) was found to have significantly increased critical current density (Jc) at high fields than its un-HIPed counterpart. The HIPed sample had a Jc of 10000 A/cm2 in 50000 Oe (5 T) at 5…
▽ More
This work studies the influence of microstructures and crystalline defects on the superconductivity of MgB2, with the objective to improve its flux pinning. A MgB2 sample pellet that was hot isostatic pressed (HIPed) was found to have significantly increased critical current density (Jc) at high fields than its un-HIPed counterpart. The HIPed sample had a Jc of 10000 A/cm2 in 50000 Oe (5 T) at 5K. This was 20 times higher than that of the un-HIPed sample, and the same as the best Jc reported by other research groups. Microstructures observed in scanning and transmission electron microscopy indicate that the HIP process eliminated porosity present in the MgB2 pellet resulting in an improved intergrain connectivity. Such improvement in intergrain connectivity was believed to prevent the steep Jc drop with magnetic field H that occurred in the un-HIPed MgB2 pellet at H > 45000 Oe (4.5 T) and T = 5 K. The HIP process was also found to disperse the MgO that existed at the grain boundaries of the un-HIPed MgB2 pellet and to generate more dislocations in the HIPed the pellets. These dispersed MgO particles and dislocations improved flux pinning also at H<45000 Oe. The HIPing process was also found to lower the resistivity at room temperature.
△ Less
Submitted 5 March, 2002; v1 submitted 25 January, 2002;
originally announced January 2002.
-
Synthesis, characterization and ageing of MgB2
Authors:
A. Serquis,
R. Schulze,
Y. T. Zhu,
J. Y. Coulter,
D. E. Peterson,
N. O. Moreno,
P. G. Pagliuso,
S. S. Indrakanti,
V. F. Nesterenko,
F. M. Mueller
Abstract:
We studied the influence of sample preparation and defects in the superconducting properties samples using atomic ratios of Mg:B=1:1 and Mg:B=1:2. Samples were characterized by SEM, and XRD, and the magnetization properties were examined in a SQUID magnetometer. The presence of Mg vacancies was determined by Rietveld analysis. Most of the samples exhibited sharp superconducting transitions with…
▽ More
We studied the influence of sample preparation and defects in the superconducting properties samples using atomic ratios of Mg:B=1:1 and Mg:B=1:2. Samples were characterized by SEM, and XRD, and the magnetization properties were examined in a SQUID magnetometer. The presence of Mg vacancies was determined by Rietveld analysis. Most of the samples exhibited sharp superconducting transitions with Tcs between 37- 39 K. We found a strong correlation between the crystal strain and the Tc. This strain was related to the presence of Mg vacancies. In addition, results showed that some samples degraded with time when exposed to ambient conditions. In these samples the Tc did not change with time, but the superconducting transition became broader and the Meissner fraction decreased. This effect was only present in samples with poor connectivity between grains and smaller grain sizes. The degradation was related to a surface decomposition as observed by X-ray Photoelectron Spectroscopy. No correlation was found between this effect and the presence of Mg vacancies.
△ Less
Submitted 13 December, 2001;
originally announced December 2001.
-
Improved superconducting properties of MgB2
Authors:
N. A. Frederick,
Shi Li,
M. B. Maple,
V. F. Nesterenko,
S. S. Indrakanti
Abstract:
We present electrical transport, magnetization, and specific heat measurements on bulk MgB2 samples (T_{c} = 38.5 K) synthesized under 200 MPa pressure using a process based on hot isostatic pressing with cooling under pressure. The samples are fully dense and display excellent superconducting properties, including a narrow superconducting transition width (ΔT_{c} = 0.75 K), a high upper critica…
▽ More
We present electrical transport, magnetization, and specific heat measurements on bulk MgB2 samples (T_{c} = 38.5 K) synthesized under 200 MPa pressure using a process based on hot isostatic pressing with cooling under pressure. The samples are fully dense and display excellent superconducting properties, including a narrow superconducting transition width (ΔT_{c} = 0.75 K), a high upper critical field H_{c2} (H_{c2}(0) ~ 155 kOe), and a critical current density J_{c} that is the largest yet measured for bulk samples of MgB2 (J_{c}(0) ~ 1.4 MA/cm^{2}). Specific heat measurements yielded a jump ΔC at T_{c} of 92 mJ/mol K. These superconducting properties are comparable to those obtained with techniques that are not so well suited to industrial scale fabrication.
△ Less
Submitted 25 June, 2001;
originally announced June 2001.
-
Hot isostatic pressing of bulk magnesium diboride: mechanical and superconducting properties
Authors:
S. S. Indrakanti,
V. F. Nesterenko,
M. B. Maple,
N. A. Frederick,
W. M. Yuhasz,
Shi Li
Abstract:
Two different hot isostatic pressing cycles (HIPing) were investigated to synthesize bulk MgB2 samples: a "standard" cycle where a low vessel pressure is maintained while heating to the process temperature with a subsequent simultaneous pressure and temperature decrease and a new method - dense material cooling under pressure (DMCUP). The latter method allowed the synthesis of dense samples with…
▽ More
Two different hot isostatic pressing cycles (HIPing) were investigated to synthesize bulk MgB2 samples: a "standard" cycle where a low vessel pressure is maintained while heating to the process temperature with a subsequent simultaneous pressure and temperature decrease and a new method - dense material cooling under pressure (DMCUP). The latter method allowed the synthesis of dense samples with diameters up to 20 mm and thicknesses up to 10 mm from commercial MgB2 powder. Optimal conditions for the DMCUP method with glass encapsulation (maximum pressure 200 MPa, maximum temperature 1000 C over 200 min, and cooling under pressure) resulted in a dense material with a sharp superconducting transition at 38.5 K. This method employs a pressure which is one order of magnitude less than previously reported for pressure assisted sintering of dense material and can be scaled to larger sample sizes and complex shapes. The data for density, microhardness, fracture toughness and sound speed as well as superconducting properties for bulk magnesium diboride are presented. Ball milling the powder enhances sintering and results in a more homogeneous final microstructure.
△ Less
Submitted 8 August, 2001; v1 submitted 24 May, 2001;
originally announced May 2001.
