Showing 1–11 of 11 results for author: Nandipati, G

Object Kinetic Monte Carlo Simulations of Radiation Damage in Bulk Tungsten Part-II: With a PKA Spectrum Corresponding to 14-MeV Neutrons

Authors: Giridhar Nandipati, Wahyu Setyawan, Howard L. Heinisch, Kenneth J. Roche, Richard J. Kurtz, Brian D. Wirth

Abstract: Object kinetic Monte Carlo was employed to study the effect of dose rate on the evolution of vacancy microstructure in polycrystalline tungsten under neutron bombardment. The evolution was followed up to 1.0 displacement per atom (dpa) with point defects generated in accordance with a primary knock-on atom (PKA) spectrum corresponding to 14-MeV neutrons. The present study includes the effect of gr… ▽ More Object kinetic Monte Carlo was employed to study the effect of dose rate on the evolution of vacancy microstructure in polycrystalline tungsten under neutron bombardment. The evolution was followed up to 1.0 displacement per atom (dpa) with point defects generated in accordance with a primary knock-on atom (PKA) spectrum corresponding to 14-MeV neutrons. The present study includes the effect of grain size (2.0 and 4.0 $μ$m) but excludes the impact of transmutation or pre-existing defects beyond grain boundary sinks. Vacancy cluster density increases with dose rate, while the density of vacancies decreases. Consequently, the average vacancy cluster size and the fraction of vacancies in visible clusters decrease with increasing dose rate. The density of vacancies and vacancy clusters decrease with grain size such that the average size of the clusters remains similar. However, the average size is larger for larger grains at dose rates < 4.5 x 10-7 dpa/s. The trend of vacancy accumulation as a function of dose, dose rate, and grain size is similar to that obtained with the High Flux Isotope Reactor (HFIR) PKA spectrum. However, the amount of vacancy accumulation and the vacancy microstructure are quite different. Compared to the HFIR case, we find that even though the dose rates are 2.5 times higher, the density of vacancies and the average vacancy cluster sizes are lower. In addition, a void lattice forms only for the lowest two dose rates (4.5 x 10-8 and 4.5 x 10-9 dpa/s). In contrast, a void lattice formed at all dose rates studied using the HFIR PKA spectrum. We discuss in detail the factors that lead to these different microstructures. △ Less

Submitted 3 June, 2016; originally announced June 2016.

Self-Learning Kinetic Monte Carlo Simulations of Al Diffusion in Mg

Authors: Giridhar Nandipati, Niranjan Govind, Amity Andersen, Aashish Rohatgi

Abstract: Vacancy-mediated diffusion of an Al atom in pure Mg matrix is studied using the atomistic, on-lattice self-learning kinetic Monte Carlo (SLKMC) method. Activation barriers for vacancy-Mg and vacancy-Al atom exchange processes are calculated on-the-fly using the climbing image nudged-elastic band method and binary Mg-Al modified embedded-atom method interatomic potential. Diffusivities of an Al ato… ▽ More Vacancy-mediated diffusion of an Al atom in pure Mg matrix is studied using the atomistic, on-lattice self-learning kinetic Monte Carlo (SLKMC) method. Activation barriers for vacancy-Mg and vacancy-Al atom exchange processes are calculated on-the-fly using the climbing image nudged-elastic band method and binary Mg-Al modified embedded-atom method interatomic potential. Diffusivities of an Al atom obtained from SLKMC simulations show the same behavior as observed in experimental and theoretical studies available in the literature, that is, Al atom diffuses faster within the basal plane than along the c-axis. Although, the effective activation barriers for Al-atom diffusion from SLKMC simulations are close to experimental and theoretical values, the effective prefactors are lower than those obtained from experiments. We present all the possible vacancy-Mg and vacancy-Al atom exchange processes and their activation barriers identified in SLKMC simulations. A simple mapping scheme to map an HCP lattice on to a simple cubic lattice is described, which enables the simulation of HCP lattice using on-lattice framework. We also present the pattern recognition scheme which is used in SLKMC simulations to identify the local Al atom configuration around a vacancy. △ Less

Submitted 5 January, 2016; originally announced January 2016.

Comments: 17 pages, 9 figures

Object Kinetic Monte Carlo Simulations of Radiation Damage in Neutron-Irradiated Tungsten Part-I: Neutron Flux with a PKA Spectrum Corresponding to the High-flux Isotope Reactor

Authors: Giridhar Nandipati, Wahyu Setyawana, Howard L. Heinisch, Kenneth J. Roche, Richard J. Kurtz, Brian D. Wirth

Abstract: Object kinetic Monte Carlo simulations were performed to study the impact of varying dose rate and grain size up to a dose of 1.0 dpa in pure, polycrystalline tungsten, subjected to a neutron irradiation having a PKA spectrum corresponding to the High Flux Isotope Reactor. The present study models defect cluster accumulation in tungsten, but does not consider the impact of transmutation or pre-exi… ▽ More Object kinetic Monte Carlo simulations were performed to study the impact of varying dose rate and grain size up to a dose of 1.0 dpa in pure, polycrystalline tungsten, subjected to a neutron irradiation having a PKA spectrum corresponding to the High Flux Isotope Reactor. The present study models defect cluster accumulation in tungsten, but does not consider the impact of transmutation or pre-existing defects beyond the grain boundary sinks, with varying grain size. With increasing dose rate, the vacancy cluster density increases, while the number density of vacancies decreases. Accordingly, the average vacancy cluster size and the fraction of vacancies that are part of visible clusters decreases with increasing dose rate. With increasing grain size, both the number densities of vacancies and vacancy clusters decrease, while both the fraction of vacancies in visible clusters and the average vacancy cluster size increase. This is caused by the pseudo-ripening of the vacancy clusters due to the longer-lived self-interstitial clusters in larger grains. The spatial ordering of vacancy clusters along {110} planes was observed for both grain sizes and all dose rates studied. Interplanar spacing increases with grain size; however, no clear dependence on dose or dose rate was observed. The results of this study show that 1D diffusion of self-interstitial clusters, while necessary, is not sufficient to form a void lattice, and that the diffusion of vacancies is also required. A methodology is suggested for choosing the simulation box dimensions so as to represent more faithfully the effects of one-dimensional migrating self-interstitial-atom clusters. △ Less

Submitted 25 March, 2016; v1 submitted 9 October, 2015; originally announced October 2015.

Self-learning kinetic Monte Carlo Simulations of Self-diffusion of small Ag clusters on Ag (111) surface

Authors: Syed Islamuddin Shah, Giridhar Nandipati, Talat S. Rahman

Abstract: The self-diffusion of two-dimensional small Ag islands (containing up to $10$ atoms) on Ag(111) surface has been studied using and self-learning kinetic Monte Carlo [J. Phys.: Condens. Matter 24, 354004 (2012)] simulations. A variety of concerted, multi-atom and single-atom processes were automatically revealed in these simulations. The size dependence of the diffusion coefficients, effective ener… ▽ More The self-diffusion of two-dimensional small Ag islands (containing up to $10$ atoms) on Ag(111) surface has been studied using and self-learning kinetic Monte Carlo [J. Phys.: Condens. Matter 24, 354004 (2012)] simulations. A variety of concerted, multi-atom and single-atom processes were automatically revealed in these simulations. The size dependence of the diffusion coefficients, effective energy barriers as well as key diffusion processes responsible for island diffusion are reported. In addition, we have compared activation barriers for concerted diffusion processes with those obtained from Density Functional Theory (DFT) calculations. △ Less

Submitted 2 August, 2015; originally announced August 2015.

Displacement cascades and defects annealing in tungsten, Part I: defect database from molecular dynamics simulations

Authors: Wahyu Setyawan, Giridhar Nandipati, Kenneth J. Roche, Howard L. Heinisch, Brian D. Wirth, Richard J. Kurtz

Abstract: Molecular dynamics simulations have been used to generate a comprehensive database of surviving defects due to displacement cascades in bulk tungsten. Twenty one data points of primary knock-on atom (PKA) energies ranging from 100 eV (sub-threshold energy) to 100 keV ($\sim$780$\times E_d$, where $E_d$ is the average displacement threshold energy) have been completed at 300 K, 1025 K and 2050 K. W… ▽ More Molecular dynamics simulations have been used to generate a comprehensive database of surviving defects due to displacement cascades in bulk tungsten. Twenty one data points of primary knock-on atom (PKA) energies ranging from 100 eV (sub-threshold energy) to 100 keV ($\sim$780$\times E_d$, where $E_d$ is the average displacement threshold energy) have been completed at 300 K, 1025 K and 2050 K. Within this range of PKA energies, two regimes of power-law energy-dependence of the defect production are observed. A distinct power-law exponent characterizes the number of Frenkel pairs produced within each regime. The two regimes intersect at a transition energy which occurs at approximately 250$\times E_d$. The transition energy also marks the onset of the formation of large self-interstitial atom (SIAs) clusters (size 14 or more). The observed defect clustering behavior is asymmetric, with SIA clustering increasing with temperature, while the vacancy clustering decreases. This asymmetry increases with temperature such that at 2050 K ($\sim 0.5 T_m$) practically no large vacancy clusters are formed, meanwhile large SIA clusters appear in all simulations. The implication of such asymmetry on the long-term defect survival and damage accumulation is discussed. In addition, rare $<$100$>${110} SIA loops are observed. △ Less

Submitted 25 April, 2014; originally announced April 2014.

Comments: 10 pages, 6 figures

Displacement cascades and defects annealing in tungsten, Part II: Object kinetic Monte Carlo Simulation of Tungsten Cascade Aging

Authors: Giridhar Nandipati, Wahyu Setyawan, Howard L. Heinisch, Kenneth J. Roche, Richard J. Kurtz, Brian D. Wirth

Abstract: We describe the results of object kinetic Monte Carlo (OKMC) simulations of the annealing of primary cascade damage in bulk tungsten using a comprehensive database of cascades obtained from molecular dynamics [1] as a function of primary knock-on atom (PKA) energy and direction, and temperatures of 300, 1025 and 2050 K. An increase in SIA clustering but decrease in vacancy clustering with temperat… ▽ More We describe the results of object kinetic Monte Carlo (OKMC) simulations of the annealing of primary cascade damage in bulk tungsten using a comprehensive database of cascades obtained from molecular dynamics [1] as a function of primary knock-on atom (PKA) energy and direction, and temperatures of 300, 1025 and 2050 K. An increase in SIA clustering but decrease in vacancy clustering with temperature combined with disparate mobilities of SIAs versus vacancies causes an interesting temperature effect on cascade annealing, which is quite different from what one would expect. The annealing efficiency (ratio of number of defects after and before annealing) exhibits an inverse U-shape curve as a function of temperature. In addition, we will also describe the capabilities of our newly developed OKMC code; KSOME (kinetic simulations of microstructure evolution) used to carryout these simulations △ Less

Submitted 21 April, 2014; originally announced April 2014.

Island Size Selectivity and island-shape analysis during 2D Island Coarsening of Ag/Ag (111) Surface

Authors: Giridhar Nandipati, Abdelkader Kara, Syed Islamuddin Shah, Talat S. Rahman

Abstract: In our earlier study of Ag island coarsening on Ag(111) surface using kinetic Monte Carlo (KMC) simulations we found that during early stages coarsening proceeds as a sequence of selected island sizes resulting in peaks and valleys in the island-size distribution and that this selectivity is independent of initial conditions and dictated instead by the relative energetics of edge-atom diffusion an… ▽ More In our earlier study of Ag island coarsening on Ag(111) surface using kinetic Monte Carlo (KMC) simulations we found that during early stages coarsening proceeds as a sequence of selected island sizes resulting in peaks and valleys in the island-size distribution and that this selectivity is independent of initial conditions and dictated instead by the relative energetics of edge-atom diffusion and detachment/attachment processes and by the large activation barrier for kink detachment. In this paper we present a detailed analysis of the shapes of various island sizes observed during these KMC simulations and show that selectivity is due to the formation of kinetically stable island shapes which survive longer than non-selected sizes, which decay into nearby selected sizes. The stable shapes have a closed-shell structure - one in which every atom on the periphery having at least three nearest neighbors. Our KMC simulations were carried out using a very large database of processes identified by each atom's unique local environment, the activation barriers of which were calculated using semi-empirical interaction potentials based on the embedded-atom method. △ Less

Submitted 4 November, 2012; originally announced November 2012.

Comments: 17 pages, 11 figures

Journal ref: Phys. Rev. B 88, 115402 (2013)

SLKMC-II study of self-diffusion of small Ni clusters on Ni (111) surface

Authors: Syed Islamuddin Shah, Giridhar Nandipati, Abdelkader Kara, Talat S. Rahman

Abstract: We studied self-diffusion of small 2D Ni islands (consisting of up to 10 atoms) on Ni (111) surface using a self-learning kinetic Monte Carlo (SLKMC-II) method with an improved pattern-recognition scheme that allows inclusion of both fcc and hcp sites in the simulations. In an SLKMC simulation, a database holds information about the local neighborhood of an atom and associated processes that is ac… ▽ More We studied self-diffusion of small 2D Ni islands (consisting of up to 10 atoms) on Ni (111) surface using a self-learning kinetic Monte Carlo (SLKMC-II) method with an improved pattern-recognition scheme that allows inclusion of both fcc and hcp sites in the simulations. In an SLKMC simulation, a database holds information about the local neighborhood of an atom and associated processes that is accumulated on-the-fly as the simulation proceeds. In this study, these diffusion processes were identified using the drag method, and their activation barriers calculated using a semi-empirical interaction potential based on the embedded-atom method. Although a variety of concerted, multi-atom and single-atom processes were automatically revealed in our simulations, we found that these small islands diffuse primarily via concerted diffusion processes. We report diffusion coefficients for each island size at various tepmratures, the effective energy barrier for islands of each size and the processes most responsible for diffusion of islands of various sizes, including concerted and multi-atom processes that are not accessible under SLKMC-I or in short time-scale MD simulations. △ Less

Submitted 2 November, 2012; originally announced November 2012.

Extended Pattern Recognition Scheme for Self-learning Kinetic Monte Carlo (SLKMC-II) Simulations

Authors: Syed Islamuddin Shah, Giridhar Nandipati, Abdelkader Kara, Talat S. Rahman

Abstract: We report the development of a pattern-recognition scheme that takes into account both fcc and hcp adsorption sites in performing self-learning kinetic Monte Carlo (SLKMC-II) simulations on the fcc(111) surface. In this scheme, the local environment of every under-coordinated atom in an island is uniquely identified by grouping fcc sites, hcp sites and top-layer substrate atoms around it into hexa… ▽ More We report the development of a pattern-recognition scheme that takes into account both fcc and hcp adsorption sites in performing self-learning kinetic Monte Carlo (SLKMC-II) simulations on the fcc(111) surface. In this scheme, the local environment of every under-coordinated atom in an island is uniquely identified by grouping fcc sites, hcp sites and top-layer substrate atoms around it into hexagonal rings. As the simulation progresses, all possible processes including those like shearing, reptation and concerted gliding, which may involve fcc-fcc, hcp-hcp and fcc-hcp moves are automatically found, and their energetics calculated on the fly. In this article we present the results of applying this new pattern-recognition scheme to the self-diffusion of 9-atom islands (M9) on M(111), where M = Cu, Ag or Ni. △ Less

Submitted 2 May, 2012; v1 submitted 29 April, 2012; originally announced April 2012.

New off-lattice Pattern Recognition Scheme for off-lattice kinetic Monte Carlo Simulations

Authors: Giridhar Nandipati, Abdelkader Kara, Syed Islamuddin Shah, Talat S. Rahman

Abstract: We report the development of a new pattern-recognition scheme for the off- lattice self-learning kinetic Monte Carlo (KMC) method that is simple and flex ible enough that it can be applied to all types of surfaces. In this scheme, to uniquely identify the local environment and associated processes involving three-dimensional (3D) motion of an atom or atoms, 3D space around a central atom or leadin… ▽ More We report the development of a new pattern-recognition scheme for the off- lattice self-learning kinetic Monte Carlo (KMC) method that is simple and flex ible enough that it can be applied to all types of surfaces. In this scheme, to uniquely identify the local environment and associated processes involving three-dimensional (3D) motion of an atom or atoms, 3D space around a central atom or leading atom is divided into 3D rectangular boxes. The dimensions and the number of 3D boxes are determined by the type of the lattice and by the ac- curacy with which a process needs to be identified. As a test of this method we present the application of off-lattice KMC with the pattern-recognition scheme to 3D Cu island decay on the Cu(100) surface and to 2D diffusion of a Cu monomer and a dimer on the Cu (111) surface. We compare the results and computational efficiency to those available in the literature. △ Less

Submitted 29 September, 2011; v1 submitted 5 September, 2011; originally announced September 2011.

Comments: 25 pages, 12 figures

Island Size Selectivity during 2D Ag Island Coarsening on Ag (111)

Authors: G. Nandipati, A. Kara, S. I. Shah, T. S. Rahman

Abstract: We report on early stages of submonolayer Ag island coarsening on Ag(111) surface at room temperature ($300$ K) carried out using realistic kinetic Monte Carlo (KMC) simulations. We find that during early stages, coarsening proceeds as a sequence of selected island sizes creating peaks and valleys in the island size distribution. We find that island-size selectivity is due to formation of kinetica… ▽ More We report on early stages of submonolayer Ag island coarsening on Ag(111) surface at room temperature ($300$ K) carried out using realistic kinetic Monte Carlo (KMC) simulations. We find that during early stages, coarsening proceeds as a sequence of selected island sizes creating peaks and valleys in the island size distribution. We find that island-size selectivity is due to formation of kinetically stable islands for certain sizes because of adatom detachment/attachment processes and large activation barrier for kink detachment. In addition, we find that the ratio of number of adatom attachment to detachment processes to be independent of parameters of initial configuration and also on the initial shapes of the islands confirming that island-size selectivity is independent of initial conditions.These simulations were carried out using a very large database of processes identified by their local environment and whose activation barriers were calculated using the embedded-atom method. △ Less

Submitted 26 June, 2010; originally announced June 2010.