-
Efficient electronic cooling above 2 K by niobium-based superconducting tunnel junctions
Authors:
J. Hätinen,
A. Ronzani,
R. P. Loreto,
E. Mykkänen,
A. Kemppinen,
K. Viisanen,
T. Rantanen,
J. Geisor,
J. Lehtinen,
M. Ribeiro,
J-P. Kaikkonen,
O. Prakash,
V. Vesterinen,
W. Förbom,
E. T. Mannila,
M. Kervinen,
J. Govenius,
M. Prunnila
Abstract:
Replacing the bulky cryoliquid-based cooling stages of cryoenabled instruments by chip-scale refrigeration is envisioned to disruptively reduce the system size similar to microprocessors did for computers. Electronic refrigerators based on superconducting tunnel junctions have been anticipated to provide a solution, but reaching the necessary above the 1-K operation temperature range has remained…
▽ More
Replacing the bulky cryoliquid-based cooling stages of cryoenabled instruments by chip-scale refrigeration is envisioned to disruptively reduce the system size similar to microprocessors did for computers. Electronic refrigerators based on superconducting tunnel junctions have been anticipated to provide a solution, but reaching the necessary above the 1-K operation temperature range has remained a goal out of reach for several decades. We show efficient electronic refrigeration by Al-AlO$_x$-Nb superconducting tunnel junctions starting from bath temperatures above 2 K. The junctions can deliver electronic cooling power up to approximately mW/mm$^2$, which enables us to demonstrate tunnel-current-driven electron temperature reduction from 2.4 K to below 1.6 K (34% relative cooling) against the phonon bath. Our work shows that the key material of integrated superconducting circuits - niobium - enables powerful cryogenic refrigerator technology. This result is a prerequisite for practical cryogenic chip-scale refrigerators and, at the same time, it introduces a new electrothermal tool for quantum heat-transport experiments.
△ Less
Submitted 13 December, 2024; v1 submitted 13 March, 2024;
originally announced March 2024.
-
Thermal resistance in superconducting flip-chip assemblies
Authors:
Joel Hätinen,
Emma Mykkänen,
Klaara Viisanen,
Alberto Ronzani,
Antti Kemppinen,
Lassi Lehtisyrjä,
Janne S. Lehtinen,
Mika Prunnila
Abstract:
Cryogenic microsystems that utilize different 3D integration techniques are being actively developed, e.g., for the needs of quantum technologies. 3D integration can introduce opportunities and challenges to the thermal management of low temperature devices. In this work, we investigate sub-1 K inter-chip thermal resistance of a flip-chip bonded assembly, where two silicon chips are interconnected…
▽ More
Cryogenic microsystems that utilize different 3D integration techniques are being actively developed, e.g., for the needs of quantum technologies. 3D integration can introduce opportunities and challenges to the thermal management of low temperature devices. In this work, we investigate sub-1 K inter-chip thermal resistance of a flip-chip bonded assembly, where two silicon chips are interconnected by compression bonding via indium bumps. The total thermal contact area between the chips is 0.306 mm$^2$ and we find that the temperature dependence of the inter-chip thermal resistance follows the power law of $αT^{-3}$, with $α= 7.7-15.4$ K$^4$$μ$m$^2$/nW. The $T^{-3}$ relation indicates phononic interfacial thermal resistance, which is supported by the vanishing contribution of the electrons to the thermal conduction, due to the superconducting interconnections. Such a thermal resistance value can introduce a thermalization bottleneck in particular at cryogenic temperatures. This can be detrimental for some applications, yet it can also be harnessed. We provide an example of both cases by estimating the parasitic overheating of a cryogenic flip-chip assembly operated under various heat loads as well as simulate the performance of solid-state junction microrefrigerators utilizing the observed thermal isolation.
△ Less
Submitted 10 October, 2023; v1 submitted 2 March, 2023;
originally announced March 2023.
-
Cascaded superconducting junction refrigerators: optimization and performance limits
Authors:
A. Kemppinen,
A. Ronzani,
E. Mykkänen,
J. Hätinen,
J. S. Lehtinen,
M. Prunnila
Abstract:
We demonstrate highly transparent silicon-vanadium and silicon-aluminum tunnel junctions with relatively low sub-gap leakage current and discuss how a trade-off typically encountered between transparency and leakage affects their refrigeration performance. We theoretically investigate cascaded superconducting tunnel junction refrigerators with two or more refrigeration stages. In particular, we de…
▽ More
We demonstrate highly transparent silicon-vanadium and silicon-aluminum tunnel junctions with relatively low sub-gap leakage current and discuss how a trade-off typically encountered between transparency and leakage affects their refrigeration performance. We theoretically investigate cascaded superconducting tunnel junction refrigerators with two or more refrigeration stages. In particular, we develop an approximate method that takes into account self-heating effects but still allows us to optimize the cascade a single stage at a time. We design a cascade consisting of energy-efficient refrigeration stages, which makes cooling of, e.g., quantum devices from above 1 K to below 100 mK a realistic experimental target.
△ Less
Submitted 5 August, 2021; v1 submitted 29 September, 2020;
originally announced September 2020.
-
Driving a low critical current Josephson junction array with a mode-locked laser
Authors:
J. Nissila,
T. Fordell,
K. Kohopaa,
E. Mykkanen,
P. Immonen,
R. N. Jabradaghi,
E. Bardalen,
O. Kieler,
B. Karlsen,
P. A. Ohlckers,
R. Behr,
A. J. Manninen,
J. Govenius,
A. Kemppinen
Abstract:
We demonstrate the operation of Josephson junction arrays (JJA) driven by optical pulses generated by a mode-locked laser and an optical time-division multiplexer. A commercial photodiode converts the optical pulses into electrical ones in liquid helium several cm from the JJA. The performance of our custom-made mode-locked laser is sufficient for driving a JJA with low critical current at multipl…
▽ More
We demonstrate the operation of Josephson junction arrays (JJA) driven by optical pulses generated by a mode-locked laser and an optical time-division multiplexer. A commercial photodiode converts the optical pulses into electrical ones in liquid helium several cm from the JJA. The performance of our custom-made mode-locked laser is sufficient for driving a JJA with low critical current at multiple Shapiro steps. Our optical approach is a potential enabler for fast and energy-efficient pulse drive without expensive high-bandwidth electrical pulse pattern generator, and without high-bandwidth electrical cabling crossing temperature stages. Our measurements and simulations motivate an improved integration of photodiodes and JJAs using, e.g., flip-chip techniques, in order to improve both the understanding and fidelity of pulse-driven Josephson Arbitrary Waveform Synthesizers (JAWS).
△ Less
Submitted 25 September, 2020;
originally announced September 2020.
-
Realisation of a quantum current standard at liquid helium temperature with sub-ppm reproducibility
Authors:
Stephen Giblin,
Emma Mykkänen,
Antti Kemppinen,
Pekka Immonen,
Antti Manninen,
Máté Jenei,
Mikko Möttönen,
Gento Yamahata,
Akira Fujiwara,
Masaya Kataoka
Abstract:
A silicon electron pump operating at the temperature of liquid helium has demonstrated repeatable operation with sub-ppm accuracy. The pump current, approximately 168 pA, is measured by three laboratories, and the measurements agree with the expected current ef within the uncertainties which range from 0.2 ppm to 1.3 ppm. All the measurements are carried out in zero applied magnetic field, and the…
▽ More
A silicon electron pump operating at the temperature of liquid helium has demonstrated repeatable operation with sub-ppm accuracy. The pump current, approximately 168 pA, is measured by three laboratories, and the measurements agree with the expected current ef within the uncertainties which range from 0.2 ppm to 1.3 ppm. All the measurements are carried out in zero applied magnetic field, and the pump drive signal is a sine wave. The combination of simple operating conditions with high accuracy demonstrates the possibility that an electron pump can operate as a current standard in a National Measurement Institute. We also discuss other practical aspects of using the electron pump as a current standard, such as testing its robustness to changes in the control parameters, and using a rapid tuning procedure to locate the optimal operation point..
△ Less
Submitted 23 January, 2020; v1 submitted 4 December, 2019;
originally announced December 2019.
-
Efficient thermionic operation and phonon isolation by a semiconductor-superconductor junction
Authors:
Emma Mykkänen,
Janne S. Lehtinen,
Leif Grönberg,
Andrey Shchepetov,
Andrey V. Timofeev,
David Gunnarsson,
Antti Kemppinen,
Antti J. Manninen,
Mika Prunnila
Abstract:
Control of heat flux at small length scales is crucial for numerous solid-state devices and systems. In addition to the thermal management of information and communication devices the mastering of heat transfer channels down to the nanoscale also enable, e.g., new memory concepts, high sensitivity detectors and sensors, energy harvesters and compact solid-state refrigerators. Electronic coolers an…
▽ More
Control of heat flux at small length scales is crucial for numerous solid-state devices and systems. In addition to the thermal management of information and communication devices the mastering of heat transfer channels down to the nanoscale also enable, e.g., new memory concepts, high sensitivity detectors and sensors, energy harvesters and compact solid-state refrigerators. Electronic coolers and thermal detectors for electromagnetic radiation, especially, rely on the maximization of electro-thermal response and blockade of phonon transport. In this work, we propose and demonstrate that efficient electro-thermal operation and phonon transfer blocking can be achieved in a single solid-state thermionic junction. Our experimental demonstration relies on suspended semiconductor-superconductor junctions where the electro-thermal response arises from the superconducting energy gap, and the phonon blocking naturally results from the transmission bottleneck at the junction. We suspend different size degenerately doped silicon chips (up to macroscopic scale) directly from the junctions and cool these by biasing the junctions. The electronic cooling operation characteristics are accompanied by measurement and analysis of the thermal resistance components in the structures indicating the operation principle of phonon blocking in the junctions.
△ Less
Submitted 9 September, 2018;
originally announced September 2018.
-
Superconducting MoSi nanowires
Authors:
J. S. Lehtinen,
A. Kemppinen,
E. Mykkänen,
M. Prunnila,
A. J. Manninen
Abstract:
We have fabricated disordered superconducting nanowires of molybdenium silicide. A molybdenium nanowire is first deposited on top of silicon, and the alloy is formed by rapid thermal annealing. The method allows tuning of the crystal growth to optimise, e.g., the resistivity of the alloy for potential applications in quantum phase slip devices and superconducting nanowire single-photon detectors.…
▽ More
We have fabricated disordered superconducting nanowires of molybdenium silicide. A molybdenium nanowire is first deposited on top of silicon, and the alloy is formed by rapid thermal annealing. The method allows tuning of the crystal growth to optimise, e.g., the resistivity of the alloy for potential applications in quantum phase slip devices and superconducting nanowire single-photon detectors. The wires have effective diameters from 42 to 79 nm, enabling the observation of crossover from conventional superconductivity to regimes affected by thermal and quantum fluctuations. In the smallest diameter wire and at temperatures well below the superconducting critical temperature, we observe residual resistance and negative magnetoresistance, which can be considered as fingerprints of quantum phase slips.
△ Less
Submitted 13 October, 2017; v1 submitted 22 August, 2017;
originally announced August 2017.
-
Characterising superconducting filters using residual microwave background
Authors:
J. S. Lehtinen,
E. Mykkänen,
A. Kemppinen,
D. Golubev,
S. V. Lotkhov,
A. J. Manninen
Abstract:
A normal metal - superconductor hybrid single-electron trap with tunable barrier is utilized as a tool for spectrum analysis at the extremely low signal levels, using only well filtered cryogenic microwave background as a photon source in the frequency range from about 50 to 210 GHz. We probe millimeter wave propagation in two superconducting systems: a Josephson junction array around its plasma f…
▽ More
A normal metal - superconductor hybrid single-electron trap with tunable barrier is utilized as a tool for spectrum analysis at the extremely low signal levels, using only well filtered cryogenic microwave background as a photon source in the frequency range from about 50 to 210 GHz. We probe millimeter wave propagation in two superconducting systems: a Josephson junction array around its plasma frequency, and a superconducting titanium film in the limit when the photon energies are larger than the superconducting energy gap. This regime is relevant for improving the performance of cryogenic quantum devices but is hard to access with conventional techniques. We show that relatively simple models can be used to describe the essential properties of the studied components.
△ Less
Submitted 27 February, 2017; v1 submitted 23 September, 2016;
originally announced September 2016.
-
Traceable Coulomb Blockade Thermometry
Authors:
Ossi Hahtela,
Emma Mykkanen,
Antti Kemppinen,
Matthias Meschke,
Mika Prunnila,
David Gunnarsson,
Leif Roschier,
Jari Penttila,
Jukka Pekola
Abstract:
We present a measurement and analysis scheme for determining traceable thermodynamic temperature at cryogenic temperatures using Coulomb blockade thermometry. The uncertainty of the electrical measurement is improved by utilizing two sampling digital voltmeters instead of the traditional lock-in technique. The remaining uncertainty is dominated by that of the numerical analysis of the measurement…
▽ More
We present a measurement and analysis scheme for determining traceable thermodynamic temperature at cryogenic temperatures using Coulomb blockade thermometry. The uncertainty of the electrical measurement is improved by utilizing two sampling digital voltmeters instead of the traditional lock-in technique. The remaining uncertainty is dominated by that of the numerical analysis of the measurement data. Two analysis methods are demonstrated: numerical fitting of the full conductance curve and measuring the height of the conductance dip. The complete uncertainty analysis shows that using either analysis method the relative combined standard uncertainty (k = 1) in determining the thermodynamic temperature in the temperature range from 20 mK to 200 mK is below 0.5 %. In this temperature range, both analysis methods produced temperature estimates that deviated from 0.39 % to 0.67 % from the reference temperatures provided by a superconducting reference point device calibrated against the Provisional Low Temperature Scale of 2000.
△ Less
Submitted 21 December, 2016; v1 submitted 22 September, 2016;
originally announced September 2016.
