-
Molecular dynamics simulation of the effects of neutron irradiation on Caesium Lead Bromide
Authors:
Zhongming Zhang,
Samuel Murphy,
Michael Aspinall
Abstract:
With the development of fast neutron reactors and nuclear fusion reactors, it is necessary to find new radiation-hardened high-flux core neutron detectors. The use of perovskite Caesium Lead Bromide (CsPbBr$_3$) for neutron radiation detection is a new research direction. However, at high temperatures, the effects of neutron radiation, especially the Primary Knock-out Atom (PKA) and Displacement P…
▽ More
With the development of fast neutron reactors and nuclear fusion reactors, it is necessary to find new radiation-hardened high-flux core neutron detectors. The use of perovskite Caesium Lead Bromide (CsPbBr$_3$) for neutron radiation detection is a new research direction. However, at high temperatures, the effects of neutron radiation, especially the Primary Knock-out Atom (PKA) and Displacement Per Atom (DPA), and the defect distribution at the molecular level have not been reported. This study investigated the effect on CsPbBr$_3$ produced by 14 MeV neutron irradiation under 100 K to 400 K. Molecular dynamics methods are used to model the distribution of vacancies and interstitial atoms at the molecular level of materials. This study obtained the displacement threshold energies of three atoms in CsPbBr$_3$ and obtained the distribution of vacancies and interstitial atoms within the material over time. Monte Carlo simulations were used to obtain PKA and DPA information in CsPbBr$_3$ under neutron irradiation. This research will help to further study the performance changes of halide perovskites under neutron irradiation to verify the possibility of using them as radiation-hardened neutron detectors.
△ Less
Submitted 31 May, 2025;
originally announced June 2025.
-
Atomic layer etching of niobium nitride using sequential exposures of O$_2$ and H$_2$/SF$_6$ plasmas
Authors:
Azmain A. Hossain,
Sela Murphy,
David S. Catherall,
Anthony J. Ardizzi,
Austin J. Minnich
Abstract:
Niobium nitride (NbN) is a metallic superconductor that is widely used for superconducting electronics due to its high transition temperature ($T_c$) and kinetic inductance. Processing-induced damage negatively affects the performance of these devices by mechanisms such as microwave surface loss. Atomic layer etching (ALE), with its ability to etch with Angstrom-scale control and low damage, has t…
▽ More
Niobium nitride (NbN) is a metallic superconductor that is widely used for superconducting electronics due to its high transition temperature ($T_c$) and kinetic inductance. Processing-induced damage negatively affects the performance of these devices by mechanisms such as microwave surface loss. Atomic layer etching (ALE), with its ability to etch with Angstrom-scale control and low damage, has the potential to address these issues, but no ALE process is known for NbN. Here, we report such a process consisting of sequential exposures of O$_2$ plasma and H$_2$/SF$_6$ plasma. Exposure to O$_2$ plasma rather than O$_2$ gas yields a greater fraction of Nb in the +5 oxidation state, which is then volatilized by NbF$_5$ formation with exposure to an H$_2$/SF$_6$ plasma. The SF$_6$:H$_2$ flow rate ratio is chosen to produce selective etching of Nb$_2$O$_5$ over NbN, enabling self-limiting etching within a cycle. An etch rate of 1.77 Å/cycle was measured at 125 $^\circ$C using ex-situ ellipsometry. The $T_c$ of the ALE-etched film is higher than that of an RIE-etched film of a similar thickness, highlighting the low-damage nature of the process. These findings have relevance for applications of NbN in single-photon detectors and superconducting microresonators.
△ Less
Submitted 24 February, 2025;
originally announced February 2025.
-
The conundrum of relaxation volumes in first-principles calculations of charge defects
Authors:
Anuj Goyal,
Kiran Mathew,
Richard G. Hennig,
Aleksandr Chernatynskiy,
Christopher R. Stank,
Samuel T. Murphy,
David A. Andersson,
Simon R. Phillpot,
Blas P. Uberuaga
Abstract:
The defect relaxation volumes obtained from density-functional theory (DFT) calculations of charged vacancies and interstitials are much larger than their neutral counterparts, seemingly unphysically large. In this work, we investigate the possible reasons for this and revisit the methods that address the calculation of charged defect structures in periodic DFT. We probe the dependence of the prop…
▽ More
The defect relaxation volumes obtained from density-functional theory (DFT) calculations of charged vacancies and interstitials are much larger than their neutral counterparts, seemingly unphysically large. In this work, we investigate the possible reasons for this and revisit the methods that address the calculation of charged defect structures in periodic DFT. We probe the dependence of the proposed energy corrections to charged defect formation energies on relaxation volumes and find that corrections such as the image charge correction and the alignment correction, which can lead to sizable changes in defect formation energies, have an almost negligible effect on the charged defect relaxation volume. We also investigate the volume for the net neutral defect reactions comprised of individual charged defects, and find that the aggregate formation volumes have reasonable magnitudes. This work highlights an important issue that, as for defect formation energies, the defect formation volumes depend on the choice of reservoir. We show that considering the change in volume of the electron reservoir in the formation reaction of the charged defects, analogous to how volumes of atoms are accounted for in defect formation volumes, can renormalize the formation volumes of charged defects such that they are comparable to neutral defects. This approach enables the description of the elastic properties of isolated charged defects within the overall neutral material, beyond the context of the overall defect reactions that produce the charged defect.
△ Less
Submitted 13 April, 2017;
originally announced April 2017.
-
Accommodation of Tin in Tetragonal ZrO2
Authors:
B. D. C. Bell,
S. T. Murphy,
P. A. Burr,
R. W. Grimes,
M. R. Wenman
Abstract:
Atomic scale computer simulations using density functional theory were used to investigate the behaviour of tin in the tetragonal phase oxide layer on Zr-based alloys. The $Sn_{Zr}^{\times}$ site defect was shown to be dominant across most oxygen partial pressures, with $Sn_{Zr}^{"}$ charge compensated by fully charged oxygen vacancies occurring at partial pressures below $10^{-31}$ atm. Insertion…
▽ More
Atomic scale computer simulations using density functional theory were used to investigate the behaviour of tin in the tetragonal phase oxide layer on Zr-based alloys. The $Sn_{Zr}^{\times}$ site defect was shown to be dominant across most oxygen partial pressures, with $Sn_{Zr}^{"}$ charge compensated by fully charged oxygen vacancies occurring at partial pressures below $10^{-31}$ atm. Insertion of additional positive charge into the system was shown to significantly increase the critical partial pressure at which $Sn_{Zr}^{"}$ is stable. Recently developed low-Sn nuclear fuel cladding alloys have demonstrated an improved corrosion resistance and a delayed transition compared to Sn-containing alloys, such as Zircaloy-4. The interaction between the positive charge and the tin defect is discussed in the context of alloying additions, such as niobium and their influence on corrosion of cladding alloys.
△ Less
Submitted 24 February, 2015;
originally announced February 2015.
-
The thermodynamics of hydride precipitation: the importance of entropy, enthalpy and disorder
Authors:
S. C. Lumley,
R. W. Grimes,
S. T. Murphy,
P. A. Burr,
A. Chroneos,
P. R. Chard-Tucke,
M. R. Wenman
Abstract:
The thermodynamics of H/α-Zr solid solution and zirconium hydride phases were studied using density functional theory. Disorder in ζ, γ and δ hydrides and solid solutions were modelled using a statistically significant number of randomly generated structures in combination with special quasi-random structures and solid solutions with a range of concentrations. This is used in conjunction with a ca…
▽ More
The thermodynamics of H/α-Zr solid solution and zirconium hydride phases were studied using density functional theory. Disorder in ζ, γ and δ hydrides and solid solutions were modelled using a statistically significant number of randomly generated structures in combination with special quasi-random structures and solid solutions with a range of concentrations. This is used in conjunction with a calculation of thermodynamic parameters of the system, including the temperature dependent sensible enthalpy, configurational entropy and vibrational entropy of the different crystals in the system, developed from phonon density of states. It was found that precipitation of hydrides is not thermodynamically favourable for Zr-H solid solutions containing less than 300 ppm H, suggesting that a mechanism must cause local concentration of H atoms to a greater amount than found globally in experimental samples containing hydrides. Temperature drives the reaction in the direction of solution, primarily due to entropic effects. Generally, γ hydride is the most stable phase, although it is very close in energy to the δ-phase. The sensible enthalpy of precipitation assists in stabilising HCP hydrides, and the configurational entropy change during precipitation favours FCC hydrides. None of the thermodynamic contributions are found to be negligible in driving precipitation.
△ Less
Submitted 22 January, 2014;
originally announced January 2014.
-
Hydrogen solubility in zirconium intermetallic second phase particles
Authors:
P. A. Burr,
S. T. Murphy,
S. C. Lumley,
M. R. Wenman,
R. W. Grimes
Abstract:
The enthalpies of solution of H in Zr binary intermetallic compounds formed with Cu, Cr, Fe, Mo, Ni, Nb, Sn and V were calculated by means of density functional theory simulations and compared to that of H in α-Zr. It is predicted that all Zr-rich phases (formed with Cu, Fe, Ni and Sn), and those phases formed with Nb and V, offer lower energy, more stable sites for H than α-Zr. Conversely, Mo and…
▽ More
The enthalpies of solution of H in Zr binary intermetallic compounds formed with Cu, Cr, Fe, Mo, Ni, Nb, Sn and V were calculated by means of density functional theory simulations and compared to that of H in α-Zr. It is predicted that all Zr-rich phases (formed with Cu, Fe, Ni and Sn), and those phases formed with Nb and V, offer lower energy, more stable sites for H than α-Zr. Conversely, Mo and Cr containing phases do not provide preferential solution sites for H. In all cases the most stable site for H are those that offer the highest coordination fraction of Zr atoms. Often these are four Zr tetrahedra but not always. Implications with respect to H-trapping properties of commonly observed ternary phases such as Zr(Cr,Fe)2, Zr2(Fe,Ni) and Zr(Nb,Fe)2 are also discussed.
△ Less
Submitted 29 July, 2013;
originally announced July 2013.
-
Hydrogen accommodation in Zr second phase particles: Implications for H pick-up and hydriding of Zircaloy-2 and Zircaloy-4
Authors:
P. A. Burr,
S. T. Murphy,
S. C. Lumley,
M. R. Wenman,
R. W. Grimes
Abstract:
Ab-initio computer simulations have been used to predict the energies associated with the accommodation of H atoms at interstitial sites in α, β-Zr and Zr.M intermetallics formed with common alloying additions (M = Cr, Fe, Ni). Intermetallics that relate to the Zr2(Ni,Fe) second phase particles (SPPs) found in Zircaloy-2 exhibit favourable solution enthalpies for H. The intermetallic phases that r…
▽ More
Ab-initio computer simulations have been used to predict the energies associated with the accommodation of H atoms at interstitial sites in α, β-Zr and Zr.M intermetallics formed with common alloying additions (M = Cr, Fe, Ni). Intermetallics that relate to the Zr2(Ni,Fe) second phase particles (SPPs) found in Zircaloy-2 exhibit favourable solution enthalpies for H. The intermetallic phases that relate to the Zr(Cr,Fe)2 SPPs, found predominantly in Zircaloy-4, do not offer favourable sites for interstitial H. It is proposed that Zr(Cr,Fe)2 particles may act as bridges for the migration of H through the oxide layer, whilst the Zr2(Ni,Fe)-type particles will trap the migrating H until these are dissolved or fully oxidised.
△ Less
Submitted 29 July, 2013;
originally announced July 2013.
-
Anisotropic charge screening and supercell size convergence of defect formation energies
Authors:
Samuel T. Murphy,
Nicholas D. M. Hine
Abstract:
One of the main sources of error associated with the calculation of defect formation energies using plane-wave Density Functional Theory (DFT) is finite size error resulting from the use of relatively small simulation cells and periodic boundary conditions. Most widely-used methods for correcting this error, such as that of Makov and Payne, assume that the dielectric response of the material is is…
▽ More
One of the main sources of error associated with the calculation of defect formation energies using plane-wave Density Functional Theory (DFT) is finite size error resulting from the use of relatively small simulation cells and periodic boundary conditions. Most widely-used methods for correcting this error, such as that of Makov and Payne, assume that the dielectric response of the material is isotropic and can be described using a scalar dielectric constant $ε$. However, this is strictly only valid for cubic crystals, and cannot work in highly-anisotropic cases. Here we introduce a variation of the technique of extrapolation based on the Madelung potential, that allows the calculation of well converged dilute limit defect formation energies in non-cubic systems with highly anisotropic dielectric properties. As an example of the implementation of this technique we study a selection of defects in the ceramic oxide Li$_2$TiO$_3$ which is currently being considered as a lithium battery material and a breeder material for fusion reactors.
△ Less
Submitted 22 March, 2013; v1 submitted 21 March, 2013;
originally announced March 2013.
-
Self-assembly of iron nanoclusters on the Fe3O4(111) superstructured surface
Authors:
N. Berdunov,
G. Mariotto,
S. Murphy,
I. V. Shvets
Abstract:
We report on the self-organized growth of a regular array of Fe nanoclusters on a nanopatterned magnetite surface. Under oxidizing preparation conditions the (111) surface of magnetite exhibits a regular superstructure with three-fold symmetry and a 42 A periodicity. This superstructure represents an oxygen terminated (111) surface, which is reconstructed to form a periodically strained surface.…
▽ More
We report on the self-organized growth of a regular array of Fe nanoclusters on a nanopatterned magnetite surface. Under oxidizing preparation conditions the (111) surface of magnetite exhibits a regular superstructure with three-fold symmetry and a 42 A periodicity. This superstructure represents an oxygen terminated (111) surface, which is reconstructed to form a periodically strained surface. This strain patterned surface has been used as a template for the growth of an ultrathin metal film. A Fe film of 0.5 A thickness was deposited on the substrate at room temperature. Fe nanoclusters are formed on top of the surface superstructure creating a regular array with the period of the superstructure. We also demonstrate that at least the initial stage of Fe growth occurs in two-dimensional mode. In the areas of the surface where the strain pattern is not formed, random nucleation of Fe was observed.
△ Less
Submitted 16 July, 2004; v1 submitted 10 May, 2004;
originally announced May 2004.
-
Mechanism of epitaxial self-assembly of Fe nanowedge islands on Mo(110)
Authors:
I. V. Shvets,
S. Murphy,
S. Makarov,
V. Usov,
G. Mariotto,
N. Berdunov
Abstract:
The deposition of ultrathin Fe films on the Mo(110) surface at elevated temperatures results in the formation of distinctive nanowedge islands supported on a pseudomorphic Fe layer. We propose a model explaining the growth mode of these wedge-shaped Fe islands. The model is based on the strain produced in the substrate around each island, by the lattice mismatch between the film and substrate. F…
▽ More
The deposition of ultrathin Fe films on the Mo(110) surface at elevated temperatures results in the formation of distinctive nanowedge islands supported on a pseudomorphic Fe layer. We propose a model explaining the growth mode of these wedge-shaped Fe islands. The model is based on the strain produced in the substrate around each island, by the lattice mismatch between the film and substrate. Fe adatoms migrate towards the islands due to the influence of this strain, which is related to the thickness and size of each island. The adatoms subsequently enter the islands not only through their thin ends where the island can be only two monolayers thick but on the contrary, through a vertical climb along the sides of the thicker end, which can be tens of layers thick. This mode of mass transport is again driven by strain, corresponding to the energy reduction through movement towards the location where the interatomic spacing in the island corresponds to the bulk value. A key element of the model is that misfit dislocations are formed in the lower layers of the nanowedge, which act as migration channels for the vertical climb.
△ Less
Submitted 7 May, 2004;
originally announced May 2004.
-
Atomically Resolved Spin-Dependent Tunnelling on the Oxygen-Terminated Fe3O4 (111)
Authors:
N. Berdunov,
S. Murphy,
G. Mariotto,
I. V. Shvets
Abstract:
We employ spin-polarized (SP) STM to study the spin-dependent tunneling between a magnetite (111) sample and an antiferromagnetic tip through a vacuum barrier at room temperature. Atomic scale STM images show significant magnetic contrast corresponding to variations in the local surface states induced by oxygen vacancies. The estimated variations in tunneling magnetoresistance (TMR) of 250% sugg…
▽ More
We employ spin-polarized (SP) STM to study the spin-dependent tunneling between a magnetite (111) sample and an antiferromagnetic tip through a vacuum barrier at room temperature. Atomic scale STM images show significant magnetic contrast corresponding to variations in the local surface states induced by oxygen vacancies. The estimated variations in tunneling magnetoresistance (TMR) of 250% suggest that the spin-transport properties are significantly altered locally by the presence of surface defects.
△ Less
Submitted 16 July, 2004; v1 submitted 15 March, 2004;
originally announced March 2004.
-
Room temperature study of a strain-induced electronic superstructure on a magnetite (111) surface
Authors:
N. Berdunov,
S. Murphy,
G. Mariotto,
I. V. Shvets
Abstract:
A magnetite (Fe3O4) single crystal (111) surface has been studied at various oxygen-iron surface stoichiometries. The stoichiometry was modified by controlling the in-situ sample anneal conditions. We have found the conditions that lead to the formation of an oxygen-rich surface that forms a quasi-hexagonal superstructure with a 42A periodicity. The superstructure is highly regular and was obser…
▽ More
A magnetite (Fe3O4) single crystal (111) surface has been studied at various oxygen-iron surface stoichiometries. The stoichiometry was modified by controlling the in-situ sample anneal conditions. We have found the conditions that lead to the formation of an oxygen-rich surface that forms a quasi-hexagonal superstructure with a 42A periodicity. The superstructure is highly regular and was observed by both LEED and STM. The superstructure consists of three regions, two of which have identical atomic scale structures with a periodicity of 2.8A, and a third having a periodicity that is about 10% larger (3.1A). The subtle difference in the atomic periodicities between the three areas results from the modulation of intrinsic strain developed along the surface. The superstructure results from electronic effects rather than being a mosaic of different iron oxide terminations. The onset of the superstructure is sensitive to the surface stoichiometry. From our results we could estimate the critical density of defects leading to the disappearance of the superstructure. We have modelled the experimental results and calculated the electron density using a DFT algorithm. The model clearly shows the development of strain along the surface.
△ Less
Submitted 9 March, 2004;
originally announced March 2004.
-
Lifetime of Two-Dimensional Electrons Measured by Tunneling Spectroscopy
Authors:
S. Q. Murphy,
J. P. Eisenstein,
L. N. Pfeiffer,
K. W. West
Abstract:
For electrons tunneling between parallel two-dimensional electron systems, conservation of in-plane momentum produces sharply resonant current-voltage characteristics and provides a uniquely sensitive probe of the underlying electronic spectral functions. We report here the application of this technique to accurate measurements of the temperature dependence of the electron-electron scattering ra…
▽ More
For electrons tunneling between parallel two-dimensional electron systems, conservation of in-plane momentum produces sharply resonant current-voltage characteristics and provides a uniquely sensitive probe of the underlying electronic spectral functions. We report here the application of this technique to accurate measurements of the temperature dependence of the electron-electron scattering rate in clean two-dimensional systems. Our results are in qualitative agreement with existing calculations.
△ Less
Submitted 9 June, 1995;
originally announced June 1995.
-
A Calculation of the Exponent $μ$ for the Gauge Glass model
Authors:
M. A. Moore,
S. Murphy
Abstract:
Removed according to the author's request :
Dear Administrator,
Please,please could you remove the paper,tentatively assigned the number 9312070, with title "A calculation of the exponent mu for the gauge glass model" and just submitted to the cond-mat board as it contains an important error. Mike Moore
Removed according to the author's request :
Dear Administrator,
Please,please could you remove the paper,tentatively assigned the number 9312070, with title "A calculation of the exponent mu for the gauge glass model" and just submitted to the cond-mat board as it contains an important error. Mike Moore
△ Less
Submitted 17 December, 1993;
originally announced December 1993.
