-
Quantitative measurements of transverse thermoelectric generation and cooling performances in SmCo$_5$/Bi$_{0.2}$Sb$_{1.8}$Te$_3$-based artificially tilted multilayer module
Authors:
Masayuki Murata,
Fuyuki Ando,
Takamasa Hirai,
Hiroto Adachi,
Ken-ichi Uchida
Abstract:
The transverse thermoelectric generation and cooling performances in a thermopile module composed of recently developed SmCo$_5$/Bi$_{0.2}$Sb$_{1.8}$Te$_3$ artificially tilted multilayers are evaluated quantitatively. When a large temperature difference of 405 $^\circ$C is applied to the SmCo$_5$/Bi$_{0.2}$Sb$_{1.8}$Te$_3$-based module, the open-circuit voltage and output power reach 0.51 V and 0.…
▽ More
The transverse thermoelectric generation and cooling performances in a thermopile module composed of recently developed SmCo$_5$/Bi$_{0.2}$Sb$_{1.8}$Te$_3$ artificially tilted multilayers are evaluated quantitatively. When a large temperature difference of 405 $^\circ$C is applied to the SmCo$_5$/Bi$_{0.2}$Sb$_{1.8}$Te$_3$-based module, the open-circuit voltage and output power reach 0.51 V and 0.80 W, respectively. The corresponding maximum power density is 0.16 W/cm$^2$, even if the power is normalized by the device area including areas that do not contribute to the power generation, such as epoxy resin, electrodes, and insulating layers. The maximum energy conversion efficiency for our module in this condition is experimentally determined to be 0.92%. Under the cooling operation, the same module exhibits the maximum temperature difference of 9.0 $^\circ$C and heat flow at the cold side of 1.6 W. Although these values are lower than the ideal thermoelectric performance expected from the material parameters due to the imperfections associated with modularization, the systematic investigations reported here clarify a potential of the SmCo$_5$/Bi$_{0.2}$Sb$_{1.8}$Te$_3$ artificially tilted multilayers as thermoelectric generators and cooling devices.
△ Less
Submitted 1 August, 2025; v1 submitted 17 April, 2025;
originally announced April 2025.
-
Interaction between substrate and probe in liquid metal Ga: Experimental and theoretical analysis
Authors:
Ken-ichi Amano,
Kentaro Tozawa,
Maho Tomita,
Hiroshi Nakano,
Makoto Murata,
Yousuke Abe,
Toru Utsunomiya,
Hiroyuki Sugimura,
Takashi Ichii
Abstract:
Understanding the interaction between two bodies in a liquid metal is important for developing metals with high stiffness, strength, plasticity, and thermal stability. We conducted atomic force microscopy measurements in liquid Ga and performed a theoretical calculation in which the statistical mechanics of a simple liquid containing a quantum effect was used. The experiment and theory showed unus…
▽ More
Understanding the interaction between two bodies in a liquid metal is important for developing metals with high stiffness, strength, plasticity, and thermal stability. We conducted atomic force microscopy measurements in liquid Ga and performed a theoretical calculation in which the statistical mechanics of a simple liquid containing a quantum effect was used. The experiment and theory showed unusual behaviours in the interactions between the probe and substrate in the liquid metal. In the interactions, there were relatively numerous oscillations and large amplitudes. Furthermore, the interaction ranges were relatively long. From the theoretical calculations, we found an asymmetric property that when the probe is solvophilic and the substrate is solvophobic, the interaction tends to be repulsive; when the solvation affinities are exchanged, the interaction tends to be attractive in the close position. Our findings will be useful for understanding and controlling dispersion stabilities of nanoparticles and chemical reactions in liquid metals.
△ Less
Submitted 18 May, 2022;
originally announced May 2022.
-
Phase-transition-induced giant Thomson effect for thermoelectric cooling
Authors:
Rajkumar Modak,
Masayuki Murata,
Dazhi Hou,
Asuka Miura,
Ryo Iguchi,
Bin Xu,
Rulei Guo,
Junichiro Shiomi,
Yuya Sakuraba,
Ken-ichi Uchida
Abstract:
The Seebeck and Peltier effects have been widely studied and used in various thermoelectric technologies, including thermal energy harvesting and solid-state heat pumps. However, basic and applied studies on the Thomson effect, another fundamental thermoelectric effect in conductors, are limited despite the fact that the Thomson effect allows electronic cooling through the application of a tempera…
▽ More
The Seebeck and Peltier effects have been widely studied and used in various thermoelectric technologies, including thermal energy harvesting and solid-state heat pumps. However, basic and applied studies on the Thomson effect, another fundamental thermoelectric effect in conductors, are limited despite the fact that the Thomson effect allows electronic cooling through the application of a temperature gradient bias rather than the construction of junction structures. In this article, we report the observation of a giant Thomson effect that appears owing to magnetic phase transitions. The Thomson coefficient of FeRh-based alloys reaches large values approaching $-$1,000 $μ$VK$^{-1}$ around room temperature because of the steep temperature dependence of the Seebeck coefficient associated with the antiferromagnetic-ferromagnetic phase transition. The Thomson coefficient is several orders of magnitude larger than the Seebeck coefficient of the alloys. Using the active thermography technique, we demonstrate that the Thomson cooling can be much larger than Joule heating in the same material even in a nearly steady state. The operation temperature of the giant Thomson effect in the FeRh-based alloys can be tuned over a wide range by applying an external magnetic field or by slightly changing the composition. Our findings provide a new direction in the materials science of thermoelectrics and pave the way for thermal management applications using the Thomson effect.
△ Less
Submitted 1 February, 2022; v1 submitted 4 November, 2021;
originally announced November 2021.
-
Synthesis, processing and transport properties of cubic and trigonal solid solutions in the Mg-Si-Sn system
Authors:
Pathikumar Sellappan,
Anthony Y. Fong,
Masayuki Murata,
Yasuhiro Kodera,
Javier E. Garay
Abstract:
Mg-Si-Sn solid solutions have interesting and useful semiconducting properties particularly for thermoelectric applications. While cubic solid solutions have been prepared by a variety of methods, solid solutions with a trigonal crystal structure have not been reported. We employed a combination of high energy ball milling and current activated pressure assisted densification (CAPAD) to induce and…
▽ More
Mg-Si-Sn solid solutions have interesting and useful semiconducting properties particularly for thermoelectric applications. While cubic solid solutions have been prepared by a variety of methods, solid solutions with a trigonal crystal structure have not been reported. We employed a combination of high energy ball milling and current activated pressure assisted densification (CAPAD) to induce and complete phase transformation from cubic to trigonal phase, forming dense trigonal composites. This is the first successful preparation of the trigonal phase in Mg-Si-Sn stem. In addition, we report the transport properties of both the cubic and trigonal composites measured in the 160 to 400 K range. The electrical conductivity of the trigonal composites was several times higher compared to the cubic counterparts while thermal conductivity is lower but in the range of previously reported Mg-Si-Sn materials. The Seebeck coefficient of the trigonal composites is lower compared to the cubic samples, leading to low ZT values. The ZT of the cubic samples, however is higher than previously reported for un-doped Mg-Si-Sn solid solutions which is promising for thermoelectric applications.
△ Less
Submitted 9 November, 2017;
originally announced November 2017.
-
Transport Process in Multi-Junctions of Quantum Systems
Authors:
Taro Kimura,
Masaki Murata
Abstract:
We consider the junction of multiple one-dimensional systems and study how conserved currents transport at the junction. To characterize the transport process, we introduce reflection/transmission coefficients by applying boundary conformal field theory. We compute the reflection/transmission coefficients for some examples to derive the closed formulas. The formulas demonstrate spin-flip transport…
▽ More
We consider the junction of multiple one-dimensional systems and study how conserved currents transport at the junction. To characterize the transport process, we introduce reflection/transmission coefficients by applying boundary conformal field theory. We compute the reflection/transmission coefficients for some examples to derive the closed formulas. The formulas demonstrate spin-flip transport, where the spin polarization is flipped at the junction.
△ Less
Submitted 20 May, 2015;
originally announced May 2015.
-
Structure of Non-Solid Matter in Equilibrium State under NVT ensemble: New Insight from Spatial Constraint
Authors:
Koretaka Yuge,
Makoto Murata
Abstract:
When non-solid matter (e.g., liquids or gas) is under constant volume V and density rho (e.g., in rigid box), spatial positions for their constituents are restricted by these conditions. We recently focus on the role of constraint in classical statistical thermodynamics, and find how spatial constraint connects with equilibrium properties for crystalline solids, which has not been clarified so far…
▽ More
When non-solid matter (e.g., liquids or gas) is under constant volume V and density rho (e.g., in rigid box), spatial positions for their constituents are restricted by these conditions. We recently focus on the role of constraint in classical statistical thermodynamics, and find how spatial constraint connects with equilibrium properties for crystalline solids, which has not been clarified so far. The present study extend the idea to non-solid matter under NVT ensemble in classical systems. We provide explicit representation of canonical average of radial distribution function in terms of spatial constraint, which can be well characterized by a single special microscopic state on configuration space called projection state for non-solid matter. We demonstrate that the special microscopic state can be numerically constructed for a finite number of particles.
△ Less
Submitted 4 November, 2016; v1 submitted 3 October, 2014;
originally announced October 2014.
-
Current Reflection and Transmission at Conformal Defects: Applying BCFT to Transport Process
Authors:
Taro Kimura,
Masaki Murata
Abstract:
We study reflection/transmission process at conformal defects by introducing new transport coefficients for conserved currents. These coefficients are defined by using BCFT techniques thanks to the folding trick, which turns the conformal defect into the boundary. With this definition, exact computations are demonstrated to describe reflection/transmission process for a class of conformal defects.…
▽ More
We study reflection/transmission process at conformal defects by introducing new transport coefficients for conserved currents. These coefficients are defined by using BCFT techniques thanks to the folding trick, which turns the conformal defect into the boundary. With this definition, exact computations are demonstrated to describe reflection/transmission process for a class of conformal defects. We also compute the boundary entropy based on the boundary state.
△ Less
Submitted 27 May, 2014; v1 submitted 26 February, 2014;
originally announced February 2014.
-
Current-Induced Entanglement of Nuclear Spins in Quantum Dots
Authors:
M. Eto,
T. Ashiwa,
M. Murata
Abstract:
We propose an entanglement mechanism of nuclear spins in quantum dots driven by the electric current accompanied by the spin flip. This situation is relevant to a leakage current in spin-blocked regions where electrons cannot be transported unless their spins are flipped. The current gradually increases the components of larger total spin of nuclei. This correlation among the nuclear spins marke…
▽ More
We propose an entanglement mechanism of nuclear spins in quantum dots driven by the electric current accompanied by the spin flip. This situation is relevant to a leakage current in spin-blocked regions where electrons cannot be transported unless their spins are flipped. The current gradually increases the components of larger total spin of nuclei. This correlation among the nuclear spins markedly enhances the spin-flip rate of electrons and hence the leakage current. The enhancement of the current is observable when the residence time of electrons in the quantum dots is shorter than the dephasing time T*_2 of nuclear spins.
△ Less
Submitted 7 August, 2004;
originally announced August 2004.
