Showing 1–44 of 44 results for author: Muller, F

Finite-volume effects in the $δ$-regime

Authors: Ulf-G. Meißner, Fabian Müller, Akaki Rusetsky

Abstract: We derive a systematic perturbative expansion for the finite-volume energy spectrum of the non-linear $O(N)$ $σ$-model in the $δ$-regime. The violation of the power-counting rules that emerges after the separation of the fast and slow modes is dealt with to all orders by use of the threshold expansion. The known result for the rest-frame energy spectrum up-to-and-including next-to-next-to-leading… ▽ More We derive a systematic perturbative expansion for the finite-volume energy spectrum of the non-linear $O(N)$ $σ$-model in the $δ$-regime. The violation of the power-counting rules that emerges after the separation of the fast and slow modes is dealt with to all orders by use of the threshold expansion. The known result for the rest-frame energy spectrum up-to-and-including next-to-next-to-leading order is reproduced. △ Less

Submitted 23 October, 2024; originally announced October 2024.

Comments: 30 pages, 3 figures

Non-universality of aging during phase separation of the two-dimensional long-range Ising model

Authors: Fabio Müller, Henrik Christiansen, Wolfhard Janke

Abstract: We investigate the aging properties of phase-separation kinetics following quenches from $T=\infty$ to a finite temperature below $T_c$ of the paradigmatic two-dimensional conserved Ising model with power-law decaying long-range interactions $\sim r^{-(2 + σ)}$. Physical aging with a power-law decay of the two-time autocorrelation function $C(t,t_w)\sim \left(t/t_w\right)^{-λ/z}$ is observed, disp… ▽ More We investigate the aging properties of phase-separation kinetics following quenches from $T=\infty$ to a finite temperature below $T_c$ of the paradigmatic two-dimensional conserved Ising model with power-law decaying long-range interactions $\sim r^{-(2 + σ)}$. Physical aging with a power-law decay of the two-time autocorrelation function $C(t,t_w)\sim \left(t/t_w\right)^{-λ/z}$ is observed, displaying a complex dependence of the autocorrelation exponent $λ$ on $σ$. A value of $λ=3.500(26)$ for the corresponding nearest-neighbor model (which is recovered as the $σ\rightarrow \infty$ limes) is determined. The values of $λ$ in the long-range regime ($σ< 1$) are all compatible with $λ\approx 4$. In between, a continuous crossover is visible for $1 \lesssim σ\lesssim 2$ with non-universal, $σ$-dependent values of $λ$. The performed Metropolis Monte Carlo simulations are primarily enabled by our novel algorithm for long-range interacting systems. △ Less

Submitted 12 September, 2024; originally announced September 2024.

Structure evolution of nanoparticulate Fe2O3

Authors: Andreas Erlebach, Heinz-Dieter Kurland, Janet Grabow, Frank A. Müller, Marek Sierka

Abstract: The atomic structure and properties of nanoparticulate Fe2O3 are characterized starting from its smallest Fe2O3 building unit through (Fe2O3)n clusters to nanometer-sized Fe2O3 particles. This is achieved by combining global structure optimizations at the density functional theory level, molecular dynamics simulations by employing tailored, ab initio parameterized interatomic potential functions a… ▽ More The atomic structure and properties of nanoparticulate Fe2O3 are characterized starting from its smallest Fe2O3 building unit through (Fe2O3)n clusters to nanometer-sized Fe2O3 particles. This is achieved by combining global structure optimizations at the density functional theory level, molecular dynamics simulations by employing tailored, ab initio parameterized interatomic potential functions and experiments. With the exception of nearly tetrahedral, adamantane-like (Fe2O3)2 small (Fe2O3)n clusters assume compact, virtually amorphous structures with little or no symmetry. For n = 2-5 (Fe2O3)n clusters consist mainly of two- and three-membered Fe-O rings. Starting from n = 5 they increasingly assume tetrahedral shape with the adamantane-like (Fe2O3)2 unit as the main building block. However, the small energy differences between different isomers of the same cluster-size make precise structural assignment for larger (Fe2O3)n clusters difficult. The tetrahedral morphology persists for Fe2O3 nanoparticles with up to 3 nm in diameter. Simulated crystallization of larger nanoparticles with diameters of about 5 nm demonstrates pronounced melting point depression and leads to formation of ε-Fe2O3 single crystals with hexagonal morphology. This finding is in excellent agreement with the results obtained for Fe2O3 nanopowders generated by laser vaporization and provides the first direct indication that ε-Fe2O3 may be thermodynamically the most stable phase in this size regime. △ Less

Submitted 28 May, 2024; originally announced May 2024.

Journal ref: Nanoscale, 2015,7, 2960-2969

Cooperative quantum tunneling of the magnetization in Fe-doped Li$_3$N

Authors: M. Fix, J. H. Atkinson, F. Müller, E. del Barco, A. Jesche

Abstract: The spin-reversal in dilute Li$_2$(Li$_{1-x}$Fe$_{x}$)N with $x < 1$ % is dominated by resonant quantum tunneling of spatially well-separated states. We report on the effect of finite couplings between those states that give rise to cooperative, simultaneous quantum tunneling of two spins. This phenomenon, known as spin-spin cross relaxation, effectively elucidates the fine-structure observed in i… ▽ More The spin-reversal in dilute Li$_2$(Li$_{1-x}$Fe$_{x}$)N with $x < 1$ % is dominated by resonant quantum tunneling of spatially well-separated states. We report on the effect of finite couplings between those states that give rise to cooperative, simultaneous quantum tunneling of two spins. This phenomenon, known as spin-spin cross relaxation, effectively elucidates the fine-structure observed in isothermal magnetization loops, a previously unresolved aspect. Temperature and field-dependent magnetization measurements were conducted over a range from T = 2 K to 300 K in applied fields of up to $μ_0H$ = 7 T. Magnetic dipole fields are computed numerically. Our findings affirm the absence of stoichiometric defects in Li$_2$(Li$_{1-x}$Fe$_{x}$)N and underscore its exemplary suitability as a model system for investigating spin-reversal processes at the microscopic level. This is attributed to its comparatively simple crystal structure, the availability of large single crystals, elevated characteristic energies, and well-defined energy levels △ Less

Submitted 31 October, 2024; v1 submitted 27 October, 2023; originally announced October 2023.

Comments: 9 pages, 7 figures

Journal ref: Phys. Rev. B 110, 134405 (2024)

Impact of geometry on chemical analysis exemplified for photoelectron spectroscopy of black silicon

Authors: Jens U. Neurohr, Anton Wittig, Hendrik Hähl, Friederike Nolle, Thomas Faidt, Samuel Grandthyll, Karin Jacobs, Michael A. Klatt, Frank Müller

Abstract: For smooth surfaces, chemical composition can be readily analyzed using various spectroscopic techniques, a prominent example is X-ray photoelectron spectroscopy (XPS), where the relative proportions of the elements are mainly determined by the intensity ratio of the element-specific photoelectrons. However, this analysis becomes more complex for nanorough surfaces like black silicon (b-Si) due to… ▽ More For smooth surfaces, chemical composition can be readily analyzed using various spectroscopic techniques, a prominent example is X-ray photoelectron spectroscopy (XPS), where the relative proportions of the elements are mainly determined by the intensity ratio of the element-specific photoelectrons. However, this analysis becomes more complex for nanorough surfaces like black silicon (b-Si) due to the geometry's steep slopes, which mimic local variations in emission angles. In this study, we explicitly quantify this effect through an integral geometric analysis using Minkowski tensors, correlating XPS chemical data with topographical information from Atomic Force Microscopy (AFM). This approach yields reliable estimates of layer thicknesses for nanorough surfaces. For b-Si, we found that the oxide layer is approximately 50% thicker than the native oxide layer on a standard Si wafer. This study underscores the significant impact of nanoscale geometries on chemical property analysis. △ Less

Submitted 10 October, 2024; v1 submitted 21 August, 2023; originally announced August 2023.

Phononic heat conductance of gold atomic contacts: Coherent versus incoherent transport

Authors: Fabian Müller, Peter Nielaba, Juan Carlos Cuevas, Fabian Pauly

Abstract: We present here a theoretical method to determine the phononic contribution to the thermal conductance of nanoscale systems in the phase-coherent regime. Our approach makes use of classical molecular dynamics (MD) simulations to calculate the temperature-dependent dynamical matrix, and the phononic heat conductance is subsequently computed within the Landauer-Büttiker formalism with the help of no… ▽ More We present here a theoretical method to determine the phononic contribution to the thermal conductance of nanoscale systems in the phase-coherent regime. Our approach makes use of classical molecular dynamics (MD) simulations to calculate the temperature-dependent dynamical matrix, and the phononic heat conductance is subsequently computed within the Landauer-Büttiker formalism with the help of nonequilibrium Green's function techniques. Tailored to nanostructures, crucial steps of force constant and heat transport calculations are performed directly in real space. As compared to conventional density functional theory (DFT) approaches, the advantage of our method is two-fold. First, interatomic interactions can be described with the method of choice. Semiempirical potentials may lead to large computational speedups, enabling the study of much larger systems. Second, the method naturally takes into account the temperature dependence of atomic force constants, an aspect that is ignored in typical static DFT-based calculations. We illustrate our method by analyzing the temperature dependence of the phononic thermal conductance of gold (Au) chains with lengths ranging from 1 to 12 atoms. Moreover, in order to evaluate the importance of anharmonic effects in these atomic-scale wires, we compare the phase-coherent approach with nonequilibrium MD (NEMD) simulations. We find that the predictions of the phase-coherent method and the classical NEMD approach largely agree above the Debye temperature for all studied chain lengths, which shows that heat transport is coherent and that our phase-coherent approach is well suited for such nanostructures. △ Less

Submitted 8 November, 2022; v1 submitted 19 August, 2022; originally announced August 2022.

Journal ref: Phys. Rev. B 106, 195401 (2022)

Fast, hierarchical, and adaptive algorithm for Metropolis Monte Carlo simulations of long-range interacting systems

Authors: Fabio Müller, Henrik Christiansen, Stefan Schnabel, Wolfhard Janke

Abstract: We present a fast, hierarchical, and adaptive algorithm for Metropolis Monte Carlo simulations of systems with long-range interactions that reproduces the dynamics of a standard implementation exactly, i.e., the generated configurations and consequently all measured observables are identical, allowing in particular for nonequilibrium studies. The method is demonstrated for the power-law interactin… ▽ More We present a fast, hierarchical, and adaptive algorithm for Metropolis Monte Carlo simulations of systems with long-range interactions that reproduces the dynamics of a standard implementation exactly, i.e., the generated configurations and consequently all measured observables are identical, allowing in particular for nonequilibrium studies. The method is demonstrated for the power-law interacting long-range Ising model with nonconserved order parameter and a Lennard-Jones system both in two dimensions. The measured runtimes support an average complexity $O(N\log N)$, where $N$ is the number of spins or particles. Importantly, prefactors of this scaling behavior are small, which in practice manifests in speedup factors larger than $10^4$. The method is general and will allow the treatment of large systems that were out of reach before, likely enabling a more detailed understanding of physical phenomena rooted in long-range interactions. △ Less

Submitted 29 July, 2022; originally announced July 2022.

Atomic force microscopy calibration of standing surface acoustic wave amplitudes

Authors: Jan Hellemann, Filipp Müller, Madeleine Msall, Paulo V. Santos, Stefan Ludwig

Abstract: Atomic force microscopy is an important tool for characterizing surface acoustic waves, in particular for high frequencies, where the wavelength is too short to be resolved by laser interferometry. A caveat is, that the cantilever deflection is not equal to the amplitude of the surface acoustic wave. We show, that the energy transfer from the moving surface to the cantilever instead leads to a def… ▽ More Atomic force microscopy is an important tool for characterizing surface acoustic waves, in particular for high frequencies, where the wavelength is too short to be resolved by laser interferometry. A caveat is, that the cantilever deflection is not equal to the amplitude of the surface acoustic wave. We show, that the energy transfer from the moving surface to the cantilever instead leads to a deflection exceeding the surface modulation. We present a method for an accurate calibration of surface acoustic wave amplitudes based on comparing force-curve measurements with the equation of motion of a driven cantilever. We demonstrate our method for a standing surface acoustic wave on a GaAs crystal confined in a focusing cavity with a resonance frequency near 3 GHz. △ Less

Submitted 21 November, 2021; originally announced November 2021.

Comments: 9 pages, 11 figures

Journal ref: Phys. Rev. Applied 17, 044024 (2022)

Nonflat Histogram Techniques for Spin Glasses

Authors: Fabio Müller, Stefan Schnabel, Wolfhard Janke

Abstract: We study the bimodal Edwards-Anderson spin glass comparing established methods, namely the multicanonical method, the $1/k$-ensemble and parallel tempering, to an approach where the ensemble is modified by simulating power-law-shaped histograms in energy instead of flat histograms as in the standard multicanonical case. We show that by this modification a significant speed-up in terms of mean roun… ▽ More We study the bimodal Edwards-Anderson spin glass comparing established methods, namely the multicanonical method, the $1/k$-ensemble and parallel tempering, to an approach where the ensemble is modified by simulating power-law-shaped histograms in energy instead of flat histograms as in the standard multicanonical case. We show that by this modification a significant speed-up in terms of mean round-trip times can be achieved for all lattice sizes taken into consideration. △ Less

Submitted 17 November, 2020; originally announced November 2020.

Coarse-grained Second Order Response Theory

Authors: Fenna Müller, Urna Basu, Peter Sollich, Matthias Krüger

Abstract: While linear response theory, manifested by the fluctuation dissipation theorem, can be applied at any level of coarse graining, nonlinear response theory is fundamentally of microscopic nature. For perturbations of equilibrium systems, we develop an exact theoretical framework for analyzing the nonlinear (second order) response of coarse grained observables to time-dependent perturbations, using… ▽ More While linear response theory, manifested by the fluctuation dissipation theorem, can be applied at any level of coarse graining, nonlinear response theory is fundamentally of microscopic nature. For perturbations of equilibrium systems, we develop an exact theoretical framework for analyzing the nonlinear (second order) response of coarse grained observables to time-dependent perturbations, using a path-integral formalism. The resulting expressions involve correlations of the observable with coarse grained path weights. The time symmetric part of these weights depends on the paths and perturbation protocol in a complex manner; in addition, the absence of Markovianity prevents slicing of the coarse-grained path integral. We show that these difficulties can be overcome and the response function can be expressed in terms of path weights corresponding to a single-step perturbation. This formalism thus leads to an extrapolation scheme where measuring linear responses of coarse-grained variables suffices to determine their second order response. We illustrate the validity of the formalism with an exactly solvable four-state model and the near-critical Ising model. △ Less

Submitted 29 November, 2020; v1 submitted 11 May, 2020; originally announced May 2020.

Comments: 12 pages, 7 figures

Journal ref: Phys. Rev. Research 2, 043123 (2020)

Statistical analysis of electronic and phononic transport simulations of metallic atomic contacts

Authors: D. O. Möhrle, F. Müller, M. Matt, P. Nielaba, F. Pauly

Abstract: We adapt existing phonon heat transport methods to compute the phononic thermal conductance of metallic atomic contacts during a stretching process. Nonequilibrium molecular dynamics (NEMD) simulations are used to generate atomic configurations and to simultaneously determine the phononic thermal conductance. Combining the approach with established electronic structure calculations based on a tigh… ▽ More We adapt existing phonon heat transport methods to compute the phononic thermal conductance of metallic atomic contacts during a stretching process. Nonequilibrium molecular dynamics (NEMD) simulations are used to generate atomic configurations and to simultaneously determine the phononic thermal conductance. Combining the approach with established electronic structure calculations based on a tight-binding parameterization allows us to calculate in addition charge transport properties of each contact geometry within the Landauer-Büttiker formalism. The method is computationally fast enough to perform a statistical analysis of many stretching events, and we apply it here to atomic junctions formed from three different metals, namely gold (Au), platinum (Pt) and aluminum (Al). The description of both phononic and electronic contributions to heat transport allows us to examine the validity of the Wiedemann-Franz law at the atomic scale. We find that it is well obeyed in the contact regime at room temperature for Au and Al as far as only electronic contributions are concerned, but deviations of up to 10% arise for Pt. If the total thermal conductance is studied, deviations of typically less than 10% arise for Au and Al, which can be traced back mainly to phononic contributions to the thermal conductance, while electronic and phononic contributions can add up to some 20% for single-atom contacts of Pt. △ Less

Submitted 7 October, 2019; v1 submitted 19 July, 2019; originally announced July 2019.

Journal ref: Phys. Rev. B 100, 125433 (2019)

Characterization of Hydrogen Plasma Defined Graphene Edges

Authors: Mirko K. Rehmann, Yemliha B. Kalyoncu, Marcin Kisiel, Nikola Pascher, Franz J. Giessibl, Fabian Muller, Kenji Watanabe, Takashi Taniguchi, Ernst Meyer, Ming-Hao Liu, Dominik M. Zumbuhl

Abstract: We investigate the quality of hydrogen plasma defined graphene edges by Raman spectroscopy, atomic resolution AFM and low temperature electronic transport measurements. The exposure of graphite samples to a remote hydrogen plasma leads to the formation of hexagonal shaped etch pits, reflecting the anisotropy of the etch. Atomic resolution AFM reveals that the sides of these hexagons are oriented a… ▽ More We investigate the quality of hydrogen plasma defined graphene edges by Raman spectroscopy, atomic resolution AFM and low temperature electronic transport measurements. The exposure of graphite samples to a remote hydrogen plasma leads to the formation of hexagonal shaped etch pits, reflecting the anisotropy of the etch. Atomic resolution AFM reveals that the sides of these hexagons are oriented along the zigzag direction of the graphite crystal lattice and the absence of the D-peak in the Raman spectrum indicates that the edges are high quality zigzag edges. In a second step of the experiment, we investigate hexagon edges created in single layer graphene on hexagonal boron nitride and find a substantial D-peak intensity. Polarization dependent Raman measurements reveal that hydrogen plasma defined edges consist of a mixture of zigzag and armchair segments. Furthermore, electronic transport measurements were performed on hydrogen plasma defined graphene nanoribbons which indicate a high quality of the bulk but a relatively low edge quality, in agreement with the Raman data. These findings are supported by tight-binding transport simulations. Hence, further optimization of the hydrogen plasma etching technique is required to obtain pure crystalline graphene edges. △ Less

Submitted 16 March, 2019; originally announced March 2019.

Comments: 10 pages, 7 figures

Journal ref: Carbon 150, 417 (May 24, 2019)

Large-area fabrication of low- and high-spatial-frequency laser-induced periodic surface structures on carbon fibers

Authors: Clemens Kunz, Tobias N. Büttner, Björn Naumann, Anne V. Boehm, Enrico Gnecco, Jörn Bonse, Christof Neumann, Andrey Turchanin, Frank A. Müller, Stephan Gräf

Abstract: The formation and properties of laser-induced periodic surface structures (LIPSS) were investigated on carbon fibers under irradiation of fs-laser pulses characterized by a pulse duration $τ$ = 300 fs and a laser wavelength $λ$ = 1025 nm. The LIPSS were fabricated in an air environment at normal incidence with different values of the laser peak fluence and number of pulses per spot. The morphology… ▽ More The formation and properties of laser-induced periodic surface structures (LIPSS) were investigated on carbon fibers under irradiation of fs-laser pulses characterized by a pulse duration $τ$ = 300 fs and a laser wavelength $λ$ = 1025 nm. The LIPSS were fabricated in an air environment at normal incidence with different values of the laser peak fluence and number of pulses per spot. The morphology of the generated structures was characterized by using scanning electron microscopy, atomic force microscopy and Fast-Fourier transform analyses. Moreover, the material structure and the surface chemistry of the carbon fibers before and after laser irradiation was analyzed by micro Raman spectroscopy and X-ray photoelectron spectroscopy. Large areas in the cm$^{2}$ range of carbon fiber arrangements were successfully processed with homogenously distributed high- and low-spatial frequency LIPSS. Beyond those distinct nanostructures, hybrid structures were realized for the very first time by a superposition of both types of LIPSS in a two-step process. The findings facilitate the fabrication of tailored LIPSS-based surface structures on carbon fibers that could be of particular interest for e.g. fiber reinforced polymers and concretes. △ Less

Submitted 4 May, 2018; originally announced May 2018.

Comments: 27 pages, 9 figures, full-article

Journal ref: Carbon 133 (2018) 176-185

Unwanted electroless zinc plating on current collectors in zinc air batteries

Authors: Vinoba Vijayaratnam, Harald Natter, Samuel Grandthyll, Jens Uwe Neurohr, Karin Jacobs, Frank Müller, Rolf Hempelmann

Abstract: The occurrence of metallic film deposition without external power supply on the copper current collector of a zinc air battery half-cell containing zinc slurry is investigated. Therefore, test specimens of miscellaneous materials representing the current collector are immersed in a commercial available zinc slurry as well as an in self-prepared zinc slurry. In case of copper and metals which are m… ▽ More The occurrence of metallic film deposition without external power supply on the copper current collector of a zinc air battery half-cell containing zinc slurry is investigated. Therefore, test specimens of miscellaneous materials representing the current collector are immersed in a commercial available zinc slurry as well as an in self-prepared zinc slurry. In case of copper and metals which are more noble (silver and gold), a coating on the respective specimen is obtained. An element mapping of the coated copper specimen is performed by means of scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy (EDX) identifying that the coating layer consists of zinc and oxygen. In order to clarify the crystal structure and the exact composition, focused ion beam (FIB) and x-ray photoelectron spectroscopy (XPS) measurements are applied, proving that the layer consists of elemental zinc, which, is merely oxidized on the surface. Finally, a reaction mechanism for the reversible zinc film deposition is proposed. △ Less

Submitted 19 June, 2017; originally announced June 2017.

Comments: 10 pages, 8 figures

Passivation and characterization of charge defects in ambipolar silicon quantum dots

Authors: P. C. Spruijtenburg, S. V. Amitonov, F. Mueller, W. G. van der Wiel, F. A. Zwanenburg

Abstract: In this Report we show the role of charge defects in the context of the formation of electrostatically defined quantum dots. We introduce a barrier array structure to probe defects at multiple locations in a single device. We measure samples both before and after an annealing process which uses an Al$_2$O$_3$ overlayer, grown by atomic layer deposition. After passivation of the majority of charge… ▽ More In this Report we show the role of charge defects in the context of the formation of electrostatically defined quantum dots. We introduce a barrier array structure to probe defects at multiple locations in a single device. We measure samples both before and after an annealing process which uses an Al$_2$O$_3$ overlayer, grown by atomic layer deposition. After passivation of the majority of charge defects with annealing we can electrostatically define hole quantum dots up to 180 nm in length. Our ambipolar structures reveal amphoteric charge defects that remain after annealing with charging energies of ~10 meV in both the positive and negative charge state. △ Less

Submitted 22 February, 2017; originally announced February 2017.

Comments: 9 pages, 4 figures, supplementary information

Journal ref: Scientific Reports 6, Article number: 38127 (2016)

Characterization of Anomalous Pair Currents in Josephson Junction Networks

Authors: I. Ottaviani, M. Lucci, R. Menditto, V. Merlo, M. Salvato, M. Cirillo F. Mueller, T. Weimann, M. G. Castellano, F. Chiarello, G. Torrioli, R. Russo

Abstract: Measurements performed on superconductive networks shaped in the form of planar graphs display anomalously large currents when specific branches are biased. The temperature dependencies of these currents evidence that their origin is due to Cooper pair hopping through the Josephson junctions connecting the superconductive islands of the array. The experimental data are discussed in terms of a theo… ▽ More Measurements performed on superconductive networks shaped in the form of planar graphs display anomalously large currents when specific branches are biased. The temperature dependencies of these currents evidence that their origin is due to Cooper pair hopping through the Josephson junctions connecting the superconductive islands of the array. The experimental data are discussed in terms of a theoretical model which predicts, for the system under consideration, an inhomogeneous Cooper pair distribution on the superconductive islands of the network. △ Less

Submitted 11 September, 2013; originally announced September 2013.

Comments: 10 pages and 4 figures. The paper, as it is, was submitted for publication on March 15, 2013. At the date of submission on the Archive (September 11, 2013) no feedback has yet been received from the referees

Printed Circuit Board Metal Powder Filters for Low Electron Temperatures

Authors: Filipp Mueller, Raymond N. Schouten, Matthias Brauns, Tian Gang, Wee Han Lim, Nai Shyan Lai, Andrew S. Dzurak, Wilfred G. van der Wiel, Floris A. Zwanenburg

Abstract: We report the characterisation of printed circuit boards (PCB) metal powder filters and their influence on the effective electron temperature which is as low as 22 mK for a quantum dot in a silicon MOSFET structure in a dilution refrigerator. We investigate the attenuation behaviour (10 MHz- 20 GHz) of filter made of four metal powders with a grain size below 50 um. The room-temperature attenuatio… ▽ More We report the characterisation of printed circuit boards (PCB) metal powder filters and their influence on the effective electron temperature which is as low as 22 mK for a quantum dot in a silicon MOSFET structure in a dilution refrigerator. We investigate the attenuation behaviour (10 MHz- 20 GHz) of filter made of four metal powders with a grain size below 50 um. The room-temperature attenuation of a stainless steel powder filter is more than 80 dB at frequencies above 1.5 GHz. In all metal powder filters the attenuation increases with temperature. Compared to classical powder filters, the design presented here is much less laborious to fabricate and specifically the copper powder PCB-filters deliver an equal or even better performance than their classical counterparts. △ Less

Submitted 17 April, 2013; v1 submitted 11 April, 2013; originally announced April 2013.

Comments: 13 pages, 5 figures, accepted for publication in Rev. Sci. Instrum

Journal ref: Rev. Sci. Instrum. 84, 044706 (2013)

Single-hole tunneling through a two-dimensional hole gas in intrinsic silicon

Authors: P. C. Spruijtenburg, J. Ridderbos, F. Mueller, A. W. Leenstra, M. Brauns, A. A. I. Aarnink, W. G. van der Wiel, F. A. Zwanenburg

Abstract: In this letter we report single-hole tunneling through a quantum dot in a two-dimensional hole gas, situated in a narrow-channel field-effect transistor in intrinsic silicon. Two layers of aluminum gate electrodes are defined on Si/SiO$_2$ using electron-beam lithography. Fabrication and subsequent electrical characterization of different devices yield reproducible results, such as typical MOSFET… ▽ More In this letter we report single-hole tunneling through a quantum dot in a two-dimensional hole gas, situated in a narrow-channel field-effect transistor in intrinsic silicon. Two layers of aluminum gate electrodes are defined on Si/SiO$_2$ using electron-beam lithography. Fabrication and subsequent electrical characterization of different devices yield reproducible results, such as typical MOSFET turn-on and pinch-off characteristics. Additionally, linear transport measurements at 4 K result in regularly spaced Coulomb oscillations, corresponding to single-hole tunneling through individual Coulomb islands. These Coulomb peaks are visible over a broad range in gate voltage, indicating very stable device operation. Energy spectroscopy measurements show closed Coulomb diamonds with single-hole charging energies of 5--10 meV, and lines of increased conductance as a result of resonant tunneling through additional available hole states. △ Less

Submitted 17 April, 2013; v1 submitted 10 April, 2013; originally announced April 2013.

Comments: 4 pages, 4 figures. This article has been submitted to Applied Physics Letters

Journal ref: Appl. Phys. Lett. 102, 192105 (2013)

Is adhesion superficial? Silicon wafers as a model system to study van der Waals interactions

Authors: Peter Loskill, Hendrik Hähl, Thomas Faidt, Samuel Grandthyll, Frank Müller, Karin Jacobs

Abstract: Adhesion is a key issue for researchers of various fields, it is therefore of uppermost importance to understand the parameters that are involved. Commonly, only surface parameters are employed to determine the adhesive forces between materials. Yet, van der Waals forces act not only between atoms in the vicinity of the surface, but also between atoms in the bulk material. In this review, we descr… ▽ More Adhesion is a key issue for researchers of various fields, it is therefore of uppermost importance to understand the parameters that are involved. Commonly, only surface parameters are employed to determine the adhesive forces between materials. Yet, van der Waals forces act not only between atoms in the vicinity of the surface, but also between atoms in the bulk material. In this review, we describe the principles of van der Waals interactions and outline experimental and theoretical studies investigating the influence of the subsurface material on adhesion. In addition, we present a collection of data indicating that silicon wafers with native oxide layers are a good model substrate to study van der Waals interactions with coated materials. △ Less

Submitted 28 February, 2012; originally announced February 2012.

Journal ref: Adv. Colloid Interface Sci. 179-182 (2012) 107-113

Single polymer adsorption in shear: flattening versus hydrodynamic lift and corrugation effects

Authors: Andreas Serr, Christian Sendner, Florian Mueller, Thomas R. Einert, Roland R. Netz

Abstract: The adsorption of a single polymer to a flat surface in shear is investigated using Brownian hydrodynamics simulations and scaling arguments. Competing effects are disentangled: in the absence of hydrodynamic interactions, shear drag flattens the chain and thus enhances adsorption. Hydrodynamic lift on the other hand gives rise to long-ranged repulsion from the surface which preempts the surface-a… ▽ More The adsorption of a single polymer to a flat surface in shear is investigated using Brownian hydrodynamics simulations and scaling arguments. Competing effects are disentangled: in the absence of hydrodynamic interactions, shear drag flattens the chain and thus enhances adsorption. Hydrodynamic lift on the other hand gives rise to long-ranged repulsion from the surface which preempts the surface-adsorbed state via a discontinuous desorption transition, in agreement with theoretical arguments. Chain flattening is dominated by hydrodynamic lift, so overall, shear flow weakens the adsorption of flexible polymers. Surface friction due to small-wavelength surface potential corrugations is argued to weaken the surface attraction as well. △ Less

Submitted 25 October, 2010; originally announced October 2010.

Comments: 6 pages, 4 figures

Quasi-deterministic transport of Brownian particles in an oscillating periodic potential

Authors: Pawel Romanczuk, Felix Mueller, Lutz Schimansky-Geier

Abstract: We consider overdamped Brownian dynamics in a periodic potential with temporally oscillating amplitude. We analyze the transport which shows effective diffusion enhanced by the oscillations and derive approximate expressions for the diffusion coefficient. Furthermore we analyze the effect of the oscillating potential on the transport if additionally a constant force is applied. We show the existen… ▽ More We consider overdamped Brownian dynamics in a periodic potential with temporally oscillating amplitude. We analyze the transport which shows effective diffusion enhanced by the oscillations and derive approximate expressions for the diffusion coefficient. Furthermore we analyze the effect of the oscillating potential on the transport if additionally a constant force is applied. We show the existence of synchronization regimes at which the deterministic dynamics is in resonance with the potential oscillations giving rise to transport with extremely low dispersion. We distinguish slow and fast oscillatory driving and give analytical expressions for the mean velocity and effective diffusion. △ Less

Submitted 11 May, 2010; originally announced May 2010.

Comments: submitted: Feb 12th, 2010

The order parameter of high temperature superconductors, as measured by Andreev Saint-James reflection, Raman and neutron scattering

Authors: Stefan Hüfner, Frank Müller

Abstract: By comparing experiments that use Andreev Saint-James reflection, Raman scattering (B2g) and neutron scattering on the (cuprate) high temperature superconductors, evidence is found, that all of the techniques can measure the order parameter of these superconductors. The order parameter is the energy needed to take a superconducting boson out of the condensate. It has the same temperature and dopin… ▽ More By comparing experiments that use Andreev Saint-James reflection, Raman scattering (B2g) and neutron scattering on the (cuprate) high temperature superconductors, evidence is found, that all of the techniques can measure the order parameter of these superconductors. The order parameter is the energy needed to take a superconducting boson out of the condensate. It has the same temperature and doping dependence as the superconducting transition temperature Tc. This condensation energy is different from the pairing energy (as measured by the pseudogap) except for the doping x = 0.27, where the two energies coincide: this latter situation represents the BCS case, which in the view presented here is a special case in the BCS-BEC cross-over situation appropriate for the (cuprate) high temperature superconductors. △ Less

Submitted 8 March, 2010; originally announced March 2010.

Comments: 10 pages, 4 figures

Remarks on the Order Parameter of the Cuprate High Temperature Superconductors

Authors: Stefan Huefner, Frank Mueller

Abstract: A large body of spectroscopic data on the cuprate high temperature superconductors (CHTSC) is reviewed in order to determine their order parameter. ASJ, INS, B2g Raman spectra, optical data, NIS "dips", ARPES "dips" and ARPES "kinks" all show the same excitation energy (40 meV for OP95 systems), proportional to the superconducting transition temperature, and it is therefore identified with the o… ▽ More A large body of spectroscopic data on the cuprate high temperature superconductors (CHTSC) is reviewed in order to determine their order parameter. ASJ, INS, B2g Raman spectra, optical data, NIS "dips", ARPES "dips" and ARPES "kinks" all show the same excitation energy (40 meV for OP95 systems), proportional to the superconducting transition temperature, and it is therefore identified with the order parameter. △ Less

Submitted 4 November, 2009; originally announced November 2009.

Comments: 4 pages, 1 figure

Dynamical structures in binary media of potassium-driven neurons

Authors: D. E. Postnov, F. Müller, R. B. Schuppner, L. Schimansky-Geier

Abstract: According to the conventional approach to model neural ensembles the extracellular environment has fixed ionic concentrations. However, in many cases the extracellular concentration of potassium ions can not be regarded as constant. That represents specific chemical pathway for neurons to interact and can influence strongly the behavior of a single neuron as well as large ensembles. The released… ▽ More According to the conventional approach to model neural ensembles the extracellular environment has fixed ionic concentrations. However, in many cases the extracellular concentration of potassium ions can not be regarded as constant. That represents specific chemical pathway for neurons to interact and can influence strongly the behavior of a single neuron as well as large ensembles. The released chemical agent follows a diffusive dynamics in the external medium, that lowers the threshold of individual excitable units. We address this problem by studying simplified excitable units given by a modified FitzHugh-Nagumo dynamics. In our model neurons interact only chemically via the released and diffusing potassium in the surrounding non-active medium. We study the dynamics of a single excitable unit embedded in the extracellular matter. That leads to a number of noise-induced effects, like self-modulation of firing rate in an individual neuron. In the spatially extended situation various patterns appear ranging from spirals and traveling waves to oscillons and inverted structures depending on the parameters of the medium. △ Less

Submitted 9 September, 2009; v1 submitted 28 May, 2009; originally announced May 2009.

Comments: 27 pages, 14 figures

Coherent Activation of Zero-Field Fiske Modes in Arrays of Josephson Junctions

Authors: I. Ottaviani, M. Cirillo, M. Lucci, V. Merlo, M. Salvato, M. G. Castellano, G. Torrioli, F. Mueller, T. Weimann

Abstract: Series arrays of Josephson junctions show evidence of a mode in which all the junctions oscillate in synchronism on voltage resonances appearing, in zero external magnetic field, at multiples of the fundamental Fiske step spacing. The measurements show that the current amplitude of the resonances increases linearly as their voltages are summed. Investigation of the nature of the coherent mode by… ▽ More Series arrays of Josephson junctions show evidence of a mode in which all the junctions oscillate in synchronism on voltage resonances appearing, in zero external magnetic field, at multiples of the fundamental Fiske step spacing. The measurements show that the current amplitude of the resonances increases linearly as their voltages are summed. Investigation of the nature of the coherent mode by magnetic field responses of arrays and isolated juctions reveals that the oscillations take place in a parameter plane region where dc magnetic fields only activate boundary current and flux-quanta dynamics can take place. △ Less

Submitted 26 November, 2008; originally announced November 2008.

Comments: 12 pages and 4 figures

Elemental depth profiling of fluoridated hydroxyapatite by X-ray photoelectron spectroscopy

Authors: Frank Mueller, Christian Zeitz, Hubert Mantz, Karl-Heinz Ehses, Flavio Soldera, Matthias Hannig, Stefan Huefner, Karin Jacobs

Abstract: Structural and chemical changes that arise from a fluoridation of synthetic hydroxyapatite in neutral and acidic fluoridation agents are investigated. For synthetic hydroxyapatite (Ca5(PO4)3OH = HAp), the elemental depth profiles were determined by X-ray photoelectron spectroscopy (XPS) to reveal the effect of fluoridation in nearly neutral (pH = 6.2) and acidic agents (pH = 4.2). Due to the hig… ▽ More Structural and chemical changes that arise from a fluoridation of synthetic hydroxyapatite in neutral and acidic fluoridation agents are investigated. For synthetic hydroxyapatite (Ca5(PO4)3OH = HAp), the elemental depth profiles were determined by X-ray photoelectron spectroscopy (XPS) to reveal the effect of fluoridation in nearly neutral (pH = 6.2) and acidic agents (pH = 4.2). Due to the high surface sensitivity of the technique, the depth profiles have a resolution on the nm scale. With respect to the chemical composition and the crystal structure XPS depth profiling revealed very different effects of the two treatments. In both cases, however, the fluoridation affects the surface only on the nm scale which is in contrast to recent literature, where a penetration depth up to several microns was reported. Moreover, evidence is given that the actual fluoridation depth depends on the pH value. Recently, a qualitative three layer model was proposed for the fluoridation of HAp in an acidic agent. In addition to the elemental depth profile, as presented also by various other authors, we present a quantitative depth profile of the compounds CaF2, Ca(OH)2 and fluorapatite (FAp) that are predicted by the three layer model. The analysis of our experimental data exactly reproduces the structural order of the model, however, on a scale that differs by nearly two orders of magnitude from previous predictions. Our results also reveal that the amount of Ca(OH)2 and FAp is small as compared to that of CaF2. Therefore, it has to be questioned whether such narrow Ca(OH)2 and FAp layers really can act as protective layers for the enamel. △ Less

Submitted 9 June, 2008; originally announced June 2008.

Comments: 9 pages, 5 figures, 1 table

Large field generation with Hot Isostatically Pressed Powder-in-Tube MgB2 coil at 25 K

Authors: A. Serquis, L. Civale, J. Y. Coulter, D. L. Hammon, X. Z. Liao, Y. T. Zhu, D. E. Peterson, F. M. Mueller, V. F. Nesterenko, S. S. Indrakanti

Abstract: We present the fabrication and test results of Hot-Isostatic-Pressed (HIPed) Powder-in-Tube (PIT) MgB$_2$ coils. The coils properties were measured by transport and magnetization at different applied fields ($H$) and temperatures ($T$). The engineering critical current ($J_e$) value is the largest reported in PIT MgB$_2$ wires or tapes. At 25 K our champion 6-layer coil was able to generate a fi… ▽ More We present the fabrication and test results of Hot-Isostatic-Pressed (HIPed) Powder-in-Tube (PIT) MgB$_2$ coils. The coils properties were measured by transport and magnetization at different applied fields ($H$) and temperatures ($T$). The engineering critical current ($J_e$) value is the largest reported in PIT MgB$_2$ wires or tapes. At 25 K our champion 6-layer coil was able to generate a field of 1 T at self-field ($I_c >$ 220 A, $J_e \sim 2.8 \times 10^4$ A/cm$^2$). At 4 K this coil generated 1.6 T under an applied field of 1.25 T ($I_c \sim350$ A, $J_e \sim 4.5 \times 10^4$ A/cm$^2$). These magnetic fields are high enough for a superconducting transformer or magnet applications such as MRI. A SiC doped MgB$_2$ single layer coil shows a promising improvement at high fields and exhibits $J_c > 10^4$ A/cm$^2$ at 7 T. △ Less

Submitted 23 April, 2004; v1 submitted 2 April, 2004; originally announced April 2004.

Comments: 8 pages 3 figures

The influence of structural defects on intra-granular critical currents of bulk MgB2

Authors: A. Serquis, X. Z. Liao, L. Civale, Y. T. Zhu, J. Y. Coulter, D. E. Peterson, F. M. Mueller

Abstract: Bulk MgB2 samples were prepared under different synthesis conditions and analyzed by scanning and transmission electron microscopy. The critical current densities were determined from the magnetization versus magnetic field curves of bulk and powder-dispersed-in-epoxy samples. Results show that through a slow cooling process, the oxygen dissolved in bulk MgB2 at high synthesis temperatures can s… ▽ More Bulk MgB2 samples were prepared under different synthesis conditions and analyzed by scanning and transmission electron microscopy. The critical current densities were determined from the magnetization versus magnetic field curves of bulk and powder-dispersed-in-epoxy samples. Results show that through a slow cooling process, the oxygen dissolved in bulk MgB2 at high synthesis temperatures can segregate and form nanometer-sized coherent precipitates of Mg(B,O)2 in the MgB2 matrix. Magnetization measurements indicate that these precipitates act as effective flux pinning centers and therefore significantly improve the intra-grain critical current density and its field dependence. △ Less

Submitted 1 May, 2003; originally announced May 2003.

Comments: 4 pages, 4 figures, to be published in IEE Transactions in Applied Superconductivity

Report number: LA-UR-02-5176

Journal ref: IEE Transactions in Applied Superconductivity 13 (2003) 3068-3071.

A novel approach to the synthesis of nanostructured metal-organic films: X-ray radiolysis of silver ions using a Langmuir monolayer as a template

Authors: Francois Muller, Philippe Fontaine, Samy Remita, Marie-Claude Faure, Emmanuelle Lacaze, Michel Goldmann

Abstract: An application of the radiolysis method using X-ray synchrotron beam is developed as a novel approach to the synthesis of metal-organic films with controlled shapes and thickness. We demonstrate that a Langmuir monolayer deposited onto a silver ion-containing subphase, irradiated by an incident beam impinging below the critical angle for total reflection, induces the synthesis of a stable nanost… ▽ More An application of the radiolysis method using X-ray synchrotron beam is developed as a novel approach to the synthesis of metal-organic films with controlled shapes and thickness. We demonstrate that a Langmuir monolayer deposited onto a silver ion-containing subphase, irradiated by an incident beam impinging below the critical angle for total reflection, induces the synthesis of a stable nanostructured silver-organic ultrathin film at the air-water interface. The X-ray scattering is also used to monitor in situ the structure of the silver layer during the synthesis process. The layer is observed by AFM after its transfer onto a silicon substrate. One observes a film thickness of 4.6 nm, in good agreement with the X-ray penetration depth, about 4.5 nm. The silver structure is oriented by the initial organic film phase. This experiment demonstrates the considerable potential of this approach to produce various controlled metal-organic films with a surfactant self-assembly as a template. △ Less

Submitted 5 March, 2004; v1 submitted 23 April, 2003; originally announced April 2003.

Comments: 12 pages, 4 figures

Microwave performance of high-density bulk MgB2

Authors: A. T. Findikoglu, A. Serquis, L. Civale, X. Z. Liao, Y. T. Zhu, M. E. Hawley, F. M. Mueller, V. F. Nesterenko, Y. Gu

Abstract: We have performed microwave measurements on superconducting hot-isostatically- pressed (HIPed) bulk MgB2 using a parallel-plate resonator technique. The high density and strength of the HIPed material allowed preparation of samples with mirror-like surfaces for microwave measurements. The microwave surface resistance decreased by about 40% at 20 K when the root-mean-square surface roughness was… ▽ More We have performed microwave measurements on superconducting hot-isostatically- pressed (HIPed) bulk MgB2 using a parallel-plate resonator technique. The high density and strength of the HIPed material allowed preparation of samples with mirror-like surfaces for microwave measurements. The microwave surface resistance decreased by about 40% at 20 K when the root-mean-square surface roughness was reduced from 220 nm to 110 nm through surface-polishing and ion-milling. The surface resistance was independent of surface microwave magnetic field at least up to 4 Oe and below 30 K. We attribute this behavior, and the overall low surface resistance (~0.8 mOhms at 10 GHz and 20 K), to the high density of our samples and the absence of weak links between grains. △ Less

Submitted 14 March, 2003; originally announced March 2003.

Hot isostatic pressing of powder in tube MgB2 wires

Authors: A. Serquis, L. Civale, D. L. Hammon, X. Z. Liao, J. Y. Coulter, Y. T. Zhu, M. Jaime, D. E. Peterson, F. M. Mueller, V. F. Nesterenko, Y. Gu

Abstract: The critical current density (Jc) of hot isostatic pressed (HIPed) MgB2 wires, measured by d.c. transport and magnetization, is compared with that of similar wires annealed at ambient pressure. The HIPed wires have a higher Jc than the annealed wires, especially at high temperatures and magnetic fields, and higher irreversibility field (Hirr). The HIPed wires are promising for applications, with… ▽ More The critical current density (Jc) of hot isostatic pressed (HIPed) MgB2 wires, measured by d.c. transport and magnetization, is compared with that of similar wires annealed at ambient pressure. The HIPed wires have a higher Jc than the annealed wires, especially at high temperatures and magnetic fields, and higher irreversibility field (Hirr). The HIPed wires are promising for applications, with Jc>106 A/cm2 at 5 K and zero field and >104 A/cm2 at 1.5 T and 26.5 K, and Hirr ~ 17 T at 4 K. The improvement is attributed to a high density of structural defects, which are the likely source of vortex pinning. These defects, observed by transmission electron microscopy, include small angle twisting, tilting, and bending boundaries, resulting in the formation of sub-grains within MgB2 crystallites. △ Less

Submitted 3 March, 2003; originally announced March 2003.

Comments: 13 pages,3 figures

Report number: LA-UR-03-0203

Journal ref: Appl. Phys. Lett. 82 (2003) 2847

Defect structures in MgB2 wires introduced by hot isostatic pressing

Authors: X. Z. Liao, A. Serquis, Y. T. Zhu, L. Civale, D. L. Hammon, D. E. Peterson, F. M. Mueller, V. F. Nesterenko, Y. Gu

Abstract: The microstructures of MgB2 wires prepared by the powder-in-tube technique and subsequent hot isostatic pressing were investigated using transmission electron microscopy. Large amount of crystalline defects including small angle twisting, tilting, and bending boundaries, in which high densities of dislocations reside, were found forming sub-grains within MgB2 grains. It is believed that these de… ▽ More The microstructures of MgB2 wires prepared by the powder-in-tube technique and subsequent hot isostatic pressing were investigated using transmission electron microscopy. Large amount of crystalline defects including small angle twisting, tilting, and bending boundaries, in which high densities of dislocations reside, were found forming sub-grains within MgB2 grains. It is believed that these defects resulted from particle deformation during the hot isostatic pressing process and are effective flux pinning centers that contribute to the high critical current densities of the wires at high temperatures and at high fields. △ Less

Submitted 1 March, 2003; originally announced March 2003.

Comments: 16 pages, 6 figures

Journal ref: Supercond. Sci. and Technol. 16 799--803 (2003)

Mg(B,O)2 precipitation in MgB2

Authors: X. Z. Liao, A. Serquis, Y. T. Zhu, J. Y. Huang, L. Civale, D. E. Peterson, F. M. Mueller, H. F. Xu

Abstract: MgB2 samples prepared by solid-state reaction were investigated using high-resolution transmission electron microscopy (HREM), X-ray energy-dispersive spectroscopy (EDX), electron energy-loss spectroscopy (EELS), and energy-filtered imaging. Large amounts of coherent precipitates with a size range from about 5 nm up to about 100 nm were found in the MgB2 crystallite matrices. The precipitates ar… ▽ More MgB2 samples prepared by solid-state reaction were investigated using high-resolution transmission electron microscopy (HREM), X-ray energy-dispersive spectroscopy (EDX), electron energy-loss spectroscopy (EELS), and energy-filtered imaging. Large amounts of coherent precipitates with a size range from about 5 nm up to about 100 nm were found in the MgB2 crystallite matrices. The precipitates are of different shapes including sphere, ellipsoid, and faceted polyhedron depending on the size of the precipitates. EDX and EELS analyses confirm that smaller precipitates contain magnesium, boron and oxygen while larger faceted precipitates contain mainly magnesium and oxygen, implying that the oxygen content increases with precipitate size. HREM and electron diffraction investigations found that the precipitates have the same crystal lattice structure as that of MgB2 but with various composition modulations depending on the composition of the precipitates. The precipitates transform to the MgO phase after long exposure to residual oxygen in flowing Ar gas at high temperatures. The effect of the precipitates in different size ranges on flux pinning is discussed. △ Less

Submitted 23 December, 2002; originally announced December 2002.

Comments: 29 pages, 9 Figures, to be published in J. Applied Physics

Report number: LA-UR-02-4908

Journal ref: Journal of Applied Physics 93 (2003) 6208-6215.

Monte-Carlo simulations of star-branched polyelectrolyte micelles

Authors: M. Roger, P. Guenoun, F. Muller, L. Belloni, M. Delsanti

Abstract: The concentration profiles of monomers and counterions in star-branched polyelectrolyte micelles are calculated through Monte-Carlo simulations, using the simplest freely-jointed chain model. We have investigated the onset of different regimes corresponding to the spherical and Manning condensation of counterions as a function of the strength of the Coulomb coupling. The Monte-Carlo results are… ▽ More The concentration profiles of monomers and counterions in star-branched polyelectrolyte micelles are calculated through Monte-Carlo simulations, using the simplest freely-jointed chain model. We have investigated the onset of different regimes corresponding to the spherical and Manning condensation of counterions as a function of the strength of the Coulomb coupling. The Monte-Carlo results are in fair agreement with the predictions of Self-Consistent-Field analytical models. We have simulated a real system of diblock copolymer micelles of (sodium-polystyrene-sulfonate)(NaPSS)-- (polyethylene-- propylene)(PEP) with f=54 hydrophilic branches of N=251 monomers at room temperature in salt-free solution and compared the calculated form factor with our neutron-scattering data. △ Less

Submitted 25 October, 2002; originally announced October 2002.

Comments: 14 pages, 20 figures

Microstructure and high critical current of powder in tube MgB2

Authors: A. Serquis, L. Civale, D. L. Hammon, J. Y. Coulter, X. Z. Liao, Y. T. Zhu, D. E. Peterson, F. M. Mueller

Abstract: We report dc transport and magnetization measurements of Jc in MgB2 wires fabricated by the powder-in-tube method, using commercial MgB2 powder with 5 %at Mg powder added as an additional source of magnesium, and stainless steel as sheath material. By appropriate heat treatments, we have been able to increase Jc by more than one order of magnitude from that of the as-drawn wire. We show that one… ▽ More We report dc transport and magnetization measurements of Jc in MgB2 wires fabricated by the powder-in-tube method, using commercial MgB2 powder with 5 %at Mg powder added as an additional source of magnesium, and stainless steel as sheath material. By appropriate heat treatments, we have been able to increase Jc by more than one order of magnitude from that of the as-drawn wire. We show that one beneficial effect of the annealing is the elimination of most of the micro-cracks, and we correlate the increase in Jc with the disappearance of the weak-link-type behavior. △ Less

Submitted 14 August, 2002; originally announced August 2002.

Comments: 12 pages, 3 figures, submitted to APL

Journal ref: Appl. Phys. Lett. 82 (2003) 1754

The degradation of MgB2 under ambient environment

Authors: A. Serquis, Y. T. Zhu, D. E. Peterson, F. M. Mueller, R. K. Schulze, V. F. Nesterenko, S. S. Indrakanti

Abstract: The superconductivities of samples prepared by several procedures were found to degrade under ambient environment. The degradation mechanism was studied by measuring the change of surface chemical composition of dense MgB2 pellets (prepared by hot isostatic pressure, HIPed) under atmospheric exposure using X-ray Photoelectron Spectroscopy (XPS). Results showed that samples with poor connectivity… ▽ More The superconductivities of samples prepared by several procedures were found to degrade under ambient environment. The degradation mechanism was studied by measuring the change of surface chemical composition of dense MgB2 pellets (prepared by hot isostatic pressure, HIPed) under atmospheric exposure using X-ray Photoelectron Spectroscopy (XPS). Results showed that samples with poor connectivity between grains and with smaller grain sizes degrade with time when exposed to ambient conditions. In these samples, the Tc did not change with time, but the superconducting transition became broader and the Meissner fraction decreased. In contrast, our well-sintered and the HIPed samples remained stable for several months under ambient condition. The degradation was found to be related to surface decomposition as observed by XPS. We observed the formation of oxidized Mg, primarily in the form of a Mg hydroxide, the increase of C and O contents, and the reduction of B concentration in the surface layer of MgB2 samples. △ Less

Submitted 25 June, 2002; originally announced June 2002.

Comments: 15 pages, 3 figures

Report number: LA-UR-02-0051

Journal ref: Applied Physics Letters 80 (2002) 4401

Observation of coherent oxide precipitates in polycrystalline MgB2

Authors: R. F. Klie, J. C. Idrobo, N. D. Browning, A. C. Serquis, Y. T. Zhu, X. Z. Liao, F. M. Mueller

Abstract: Here we describe the results of an atomic resolution study of oxygen incorporation into bulk MgB2. We find that ~20-100 nm sized precipitates are formed by ordered substitution of oxygen atoms onto boron lattice sites, while the basic bulk MgB2 crystal structure and orientation is preserved. The periodicity of the oxygen ordering is dictated by the oxygen concentration in the precipitates and pr… ▽ More Here we describe the results of an atomic resolution study of oxygen incorporation into bulk MgB2. We find that ~20-100 nm sized precipitates are formed by ordered substitution of oxygen atoms onto boron lattice sites, while the basic bulk MgB2 crystal structure and orientation is preserved. The periodicity of the oxygen ordering is dictated by the oxygen concentration in the precipitates and primarily occurs in the (010) plane. The presence of these precipitates correlates well with an improved critical current density and superconducting transition behavior, implying that they act as pinning centers. △ Less

Submitted 13 March, 2002; originally announced March 2002.

Comments: Submitted to Applied Physics Letters, 6 pages, 3 figures

The influence of microstructures and crystalline defects on the superconductivity of MgB2

Authors: A. Serquis, X. Y. Liao, Y. T. Zhu, J. Y. Coulter, J. Y. Huang, J. O. Willis, D. E. Peterson, F. M. Mueller, N. O. Moreno, J. D. Thompson, S. S. Indrakanti, V. F. Nesterenko

Abstract: This work studies the influence of microstructures and crystalline defects on the superconductivity of MgB2, with the objective to improve its flux pinning. A MgB2 sample pellet that was hot isostatic pressed (HIPed) was found to have significantly increased critical current density (Jc) at high fields than its un-HIPed counterpart. The HIPed sample had a Jc of 10000 A/cm2 in 50000 Oe (5 T) at 5… ▽ More This work studies the influence of microstructures and crystalline defects on the superconductivity of MgB2, with the objective to improve its flux pinning. A MgB2 sample pellet that was hot isostatic pressed (HIPed) was found to have significantly increased critical current density (Jc) at high fields than its un-HIPed counterpart. The HIPed sample had a Jc of 10000 A/cm2 in 50000 Oe (5 T) at 5K. This was 20 times higher than that of the un-HIPed sample, and the same as the best Jc reported by other research groups. Microstructures observed in scanning and transmission electron microscopy indicate that the HIP process eliminated porosity present in the MgB2 pellet resulting in an improved intergrain connectivity. Such improvement in intergrain connectivity was believed to prevent the steep Jc drop with magnetic field H that occurred in the un-HIPed MgB2 pellet at H > 45000 Oe (4.5 T) and T = 5 K. The HIP process was also found to disperse the MgO that existed at the grain boundaries of the un-HIPed MgB2 pellet and to generate more dislocations in the HIPed the pellets. These dispersed MgO particles and dislocations improved flux pinning also at H<45000 Oe. The HIPing process was also found to lower the resistivity at room temperature. △ Less

Submitted 5 March, 2002; v1 submitted 25 January, 2002; originally announced January 2002.

Comments: 18 pages, 9 figures

Report number: LA-UR-01-6908

Journal ref: Journal of Applied Physics, Vol. 92, No. 1, pp. 351--356, 1 July 2002

Synthesis, characterization and ageing of MgB2

Authors: A. Serquis, R. Schulze, Y. T. Zhu, J. Y. Coulter, D. E. Peterson, N. O. Moreno, P. G. Pagliuso, S. S. Indrakanti, V. F. Nesterenko, F. M. Mueller

Abstract: We studied the influence of sample preparation and defects in the superconducting properties samples using atomic ratios of Mg:B=1:1 and Mg:B=1:2. Samples were characterized by SEM, and XRD, and the magnetization properties were examined in a SQUID magnetometer. The presence of Mg vacancies was determined by Rietveld analysis. Most of the samples exhibited sharp superconducting transitions with… ▽ More We studied the influence of sample preparation and defects in the superconducting properties samples using atomic ratios of Mg:B=1:1 and Mg:B=1:2. Samples were characterized by SEM, and XRD, and the magnetization properties were examined in a SQUID magnetometer. The presence of Mg vacancies was determined by Rietveld analysis. Most of the samples exhibited sharp superconducting transitions with Tcs between 37- 39 K. We found a strong correlation between the crystal strain and the Tc. This strain was related to the presence of Mg vacancies. In addition, results showed that some samples degraded with time when exposed to ambient conditions. In these samples the Tc did not change with time, but the superconducting transition became broader and the Meissner fraction decreased. This effect was only present in samples with poor connectivity between grains and smaller grain sizes. The degradation was related to a surface decomposition as observed by X-ray Photoelectron Spectroscopy. No correlation was found between this effect and the presence of Mg vacancies. △ Less

Submitted 13 December, 2001; originally announced December 2001.

Comments: 6 pages, MRS Fall Meeting 2001

Report number: LA-UR-01-6496

Journal ref: MRS Proceedings Vol. 689 E2.7 (2001)

Effect of lattice strain and defects on the superconductivity of MgB2

Authors: A. Serquis, Y. T. Zhu, E. J. Peterson, J. Y. Coulter, D. E. Peterson, F. M. Mueller

Abstract: The influence of lattice strain and Mg vacancies on the superconducting properties of MgB2 samples has been investigated. High quality samples with sharp superconducting transitions were synthesized. The variation in lattice strain and Mg vacancy concentrations were obtained by varying the synthesis conditions. It was found that high strain (~1%) and the presence of Mg vacancies (~ 5 %) resulted… ▽ More The influence of lattice strain and Mg vacancies on the superconducting properties of MgB2 samples has been investigated. High quality samples with sharp superconducting transitions were synthesized. The variation in lattice strain and Mg vacancy concentrations were obtained by varying the synthesis conditions. It was found that high strain (~1%) and the presence of Mg vacancies (~ 5 %) resulted in lowering the Tc by only 2 K. △ Less

Submitted 29 October, 2001; originally announced October 2001.

Comments: 3 figures, HTML+GIF format to be published in APL

Report number: LA-UR-01-5258

Journal ref: Appl. Phys. Lett. 79 (2001) 4399

Carrier relaxation, pseudogap, and superconducting gap in high-Tc cuprates: A Raman scattering study

Authors: M. Opel, R. Nemetschek, C. Hoffmann, R. Philipp, P. F. Müller, R. Hackl, I. Tüttö, A. Erb, B. Revaz, E. Walker, H. Berger, L. Forró

Abstract: We describe results of electronic Raman-scattering experiments in differently doped single crystals of Y-123 and Bi-2212. The comparison of AF insulating and metallic samples suggests that at least the low-energy part of the spectra originates predominantly from excitations of free carriers. We therefore propose an analysis of the data in terms of a memory function approach. Dynamical scattering… ▽ More We describe results of electronic Raman-scattering experiments in differently doped single crystals of Y-123 and Bi-2212. The comparison of AF insulating and metallic samples suggests that at least the low-energy part of the spectra originates predominantly from excitations of free carriers. We therefore propose an analysis of the data in terms of a memory function approach. Dynamical scattering rates and mass-enhancement factors for the carriers are obtained. In B2g symmetry the Raman data compare well to the results obtained from ordinary and optical transport. For underdoped materials the dc scattering rates in B1g symmetry become temperature independent and considerably larger than in B2g symmetry. This increasing anisotropy is accompanied by a loss of spectral weight in B2g symmetry in the range between the superconducting transition at Tc and a characteristic temperature T* of order room temperature which compares well with the pseudogap temperature found in other experiments. The energy range affected by the pseudogap is doping and temperature independent. The integrated spectral loss is approximately 25% in underdoped samples and becomes much weaker towards higher carrier concentration. In underdoped samples, superconductivity related features in the spectra can be observed only in B2g symmetry. The peak frequencies scale with Tc. We do not find a direct relation between the pseudogap and the superconducting gap. △ Less

Submitted 19 August, 1999; originally announced August 1999.

Comments: RevTeX, 21 pages, 24 gif figures. For PostScript with embedded eps figures, see http://www.wmi.badw-muenchen.de/~opel/k2.html

Journal ref: Phys. Rev. B 61, 9752 (2000)

Phase Diagram of Coupled Ladders

Authors: T. F. A. Muller, T. M. Rice

Abstract: The 2-leg t-J ladder forms a spin liquid at half-filling which evolves to a Luther-Emery liquid upon doping. Our aim is to obtain a complete phase diagram for isotropic coupling (i.e. rungs and legs equal) as a function of electron density n and the ratio J/t (>0). Two known limiting cases are: n<1/2 which is a single band Luttinger liquid and small hole doping for J/t close to 0 which is a Naga… ▽ More The 2-leg t-J ladder forms a spin liquid at half-filling which evolves to a Luther-Emery liquid upon doping. Our aim is to obtain a complete phase diagram for isotropic coupling (i.e. rungs and legs equal) as a function of electron density n and the ratio J/t (>0). Two known limiting cases are: n<1/2 which is a single band Luttinger liquid and small hole doping for J/t close to 0 which is a Nagaoka ferromagnet. Using Lanczos techniques we examine the region between the Nagaoka and Luther-Emery phases for 1>n>1/2. We find evidences for gapless behavior in both spin and charge channels for J/t<0.3 consistent with Luttinger liquids in both bonding and anti-bonding bands (i.e., C2S2). This proposal is based on the behavior of spin and charge correlation functions. For example the hole-hole correlation function which displays hole pairing at larger J/t, shows hole-hole repulsion in this region. As a further test, we examined the dependence of the energy on a relative phase shift between bonding and antibonding bands. For J/t < 0.3 this is very weak, indicating a lack of pairing between these channels. △ Less

Submitted 27 February, 1998; originally announced February 1998.

Comments: 21 pages, 18 figures

Report number: ETH-TH/98-09

Electronic Structure of Ladder Cuprates

Authors: T. F. A. Muller, V. Anisimov, T. M. Rice, I. Dasgupta, T. Saha-Dasgupta

Abstract: We study the electronic structure of the ladder compounds (SrCa)CuO 14-24-41 and SrCuO 123. LDA calculations for both give similar Cu 3d-bands near the Fermi energy. The hopping parameters estimated by fitting LDA energy bands show a strong anisotropy between the t_perp t_par intra-ladder hopping and small inter-ladder hopping. A downfolding method shows that this anisotropy arises from the ladd… ▽ More We study the electronic structure of the ladder compounds (SrCa)CuO 14-24-41 and SrCuO 123. LDA calculations for both give similar Cu 3d-bands near the Fermi energy. The hopping parameters estimated by fitting LDA energy bands show a strong anisotropy between the t_perp t_par intra-ladder hopping and small inter-ladder hopping. A downfolding method shows that this anisotropy arises from the ladder structure.The conductivity perpendicular to the ladders is computed assuming incoherent tunneling giving a value close to experiment. △ Less

Submitted 27 January, 1998; originally announced January 1998.

Comments: 5 pages, 3 figures

Report number: ETH-TH/98-03

Enhanced Electron-Phonon Coupling and its Irrelevance to High T$_{c}$ Superconductivity

Authors: T. P. Devereaux, A. Virosztek, A. Zawadowski, M. Opel, P. F. Müller, C. Hoffmann, R. Philipp, R. Nemetschek, R. Hackl, A. Erb, E. Walker, H. Berger, L. Forró

Abstract: It is argued that the origin of the buckling of the CuO$_{2}$ planes in certain cuprates as well as the strong electron-phonon coupling of the $B_{1g}$ phonon is due to the electric field across the planes induced by atoms with different valence above and below. The magnitude of the electric field is deduced from new Raman results on YBa$_{2}$Cu$_{3}$O$_{6+x}$ and Bi$_{2}$Sr$_{2}$(Ca$_{1-x}$Y… ▽ More It is argued that the origin of the buckling of the CuO$_{2}$ planes in certain cuprates as well as the strong electron-phonon coupling of the $B_{1g}$ phonon is due to the electric field across the planes induced by atoms with different valence above and below. The magnitude of the electric field is deduced from new Raman results on YBa$_{2}$Cu$_{3}$O$_{6+x}$ and Bi$_{2}$Sr$_{2}$(Ca$_{1-x}$Y$_{x}$)Cu$_{2}$O$_{8}$ with different O and Y doping, respectively. In the latter case it is shown that the symmetry breaking by replacing Ca partially by Y enhances the coupling by an order of magnitude, while the superconducting $T_c$ drops to about two third of its original value. △ Less

Submitted 21 May, 1998; v1 submitted 11 December, 1997; originally announced December 1997.

Comments: 4 pages, 2 figures. This and other papers can be downloaded from http://gwis2.circ.gwu.edu/~tpd

Report number: 121197

Journal ref: Sol. State Comm. Vol. 108, 407 (1998)