-
Non-equilibrium configurations of swelling polymer brush layers induced by spreading drops of weakly volatile oil
Authors:
Özlem Kap,
Simon Hartmann,
Harmen Hoek,
Sissi de Beer,
Igor Siretanu,
Uwe Thiele,
Frieder Mugele
Abstract:
Polymer brush layers are responsive materials that swell in contact with good solvents and their vapors. We deposit drops of an almost completely wetting volatile oil onto an oleophilic polymer brush layer and follow the response of the system upon simultaneous exposure to both liquid and vapor. Interferometric imaging shows that a halo of partly swollen polymer brush layer forms ahead of the movi…
▽ More
Polymer brush layers are responsive materials that swell in contact with good solvents and their vapors. We deposit drops of an almost completely wetting volatile oil onto an oleophilic polymer brush layer and follow the response of the system upon simultaneous exposure to both liquid and vapor. Interferometric imaging shows that a halo of partly swollen polymer brush layer forms ahead of the moving contact line. The swelling dynamics of this halo is controlled by a subtle balance of direct imbibition from the drop into the brush layer and vapor phase transport and can lead to very long-lived transient swelling profiles as well as non-equilibrium configurations involving thickness gradients in a stationary state. A gradient dynamics model based on a free energy functional with three coupled fields is developed and numerically solved. It describes experimental observations and reveals how local evaporation and condensation conspire to stabilize the inhomogeneous non-equilibrium stationary swelling profiles. A quantitative comparison of experiments and calculations provides access to the solvent diffusion coefficient within the brush layer. Overall, the results highlight the - presumably generally applicable - crucial role of vapor phase transport in dynamic wetting phenomena involving volatile liquids on swelling functional surfaces.
△ Less
Submitted 10 March, 2023; v1 submitted 9 March, 2023;
originally announced March 2023.
-
Absence of anomalous underscreening in highly concentrated aqueous electrolytes confined between smooth silica surfaces
Authors:
Saravana Kumar,
Peter Cats,
Mohammed B. Alotaibi,
Subhash C. Ayirala,
Ali A. Yousef,
René van Roij,
Igor Siretanu,
Frieder Mugele
Abstract:
Recent experiments and a series of subsequent theoretical studies suggest the occurrence of universal underscreening in highly concentrated electrolyte solutions. We performed a set of systematic Atomic Force Spectroscopy measurements for aqueous salt solutions in a concentration range from 1 mM to 5 M using chloride salts of various alkali metals as well as mixed concentrated salt solutions (invo…
▽ More
Recent experiments and a series of subsequent theoretical studies suggest the occurrence of universal underscreening in highly concentrated electrolyte solutions. We performed a set of systematic Atomic Force Spectroscopy measurements for aqueous salt solutions in a concentration range from 1 mM to 5 M using chloride salts of various alkali metals as well as mixed concentrated salt solutions (involving both mono- and divalent cations and anions), that mimic concentrated brines typically encountered in geological formations. Experiments were carried out using flat substrates and submicrometer-sized colloidal probes made of smooth oxidized silicon immersed in salt solutions at pH values of 6 and 9 and temperatures of 25 °C and 45 °C. While strong repulsive forces were observed for the smallest tip-sample separations, none of the conditions explored displayed any indication of anomalous long range electrostatic forces as reported for macroscopic mica surfaces. Instead, forces are universally dominated by attractive van der Waals interactions at tip-sample separations of $\approx$2nm and beyond for salt concentrations of 1 M and higher. Complementary calculations based on classical density functional theory for the primitive model support these experimental observations and display a consistent decrease in screening length with increasing ion concentration.
△ Less
Submitted 24 January, 2022; v1 submitted 21 January, 2022;
originally announced January 2022.
-
Roughness Induced Rotational Slowdown Near the Colloidal Glass Transition
Authors:
Beybin Ilhan,
Frieder Mugele,
Michael H. G. Duits
Abstract:
Roughening the surface of spherical colloids can drastically change their translational and rotational dynamics in dense suspensions. Using 3D confocal microscopy, we show that roughness not only lowers the concentration of the translational colloidal glass transition, but also generates a broad concentration range in which the rotational Brownian motion changes signature from high-amplitude diffu…
▽ More
Roughening the surface of spherical colloids can drastically change their translational and rotational dynamics in dense suspensions. Using 3D confocal microscopy, we show that roughness not only lowers the concentration of the translational colloidal glass transition, but also generates a broad concentration range in which the rotational Brownian motion changes signature from high-amplitude diffusive to low-amplitude rattling. This hitherto not reported second glass transition for rough spherical colloids emerges when the particle intersurface distance becomes comparable to the roughness length scale. Interlocking contacts are responsible for restricting the particle rotations.
△ Less
Submitted 27 September, 2021; v1 submitted 21 December, 2020;
originally announced December 2020.
-
Electrowetting-Controlled Dropwise Condensation with Patterned Electrodes: Physical Principles, Modeling, and Application Perspectives for Fog Harvesting and Enhanced Heat Transfer
Authors:
Harmen Hoek,
Ranabir Dey,
Frieder Mugele
Abstract:
Patterning the wettability of solid surfaces is a successful strategy to control the dropwise condensation of vapor onto partially wetting solid surfaces. We followed the condensation of water vapor onto electrowetting-functionalized surfaces with structured co-planar electrodes. A detailed analysis of the experimental distribution of millions of drops reveals that despite the presence of contact…
▽ More
Patterning the wettability of solid surfaces is a successful strategy to control the dropwise condensation of vapor onto partially wetting solid surfaces. We followed the condensation of water vapor onto electrowetting-functionalized surfaces with structured co-planar electrodes. A detailed analysis of the experimental distribution of millions of drops reveals that despite the presence of contact angle hysteresis and the occurrence of random drop coalescence events, the preferential drop position closely follows the evolution of the local minima of the numerically calculated drop size-dependent electrostatic energy landscape in two dimensions. Even subtle transitions between competing preferred locations are properly reproduced by the model. Based on this quantitative understanding of the condensation patterns, we discuss a series of important follow-up steps that need to be taken to demonstrate a reliable performance gain in various applications focusing in particular on enhanced heat transfer.
△ Less
Submitted 27 July, 2020;
originally announced July 2020.
-
Spherical probes for simultaneous measurement of rotational and translational diffusion in 3 dimensions
Authors:
Beybin Ilhan,
Jelle J. Schoppink,
Frieder Mugele,
Michael H. G. Duits
Abstract:
Real time visualization and tracking of colloidal particles with 3D resolution is essential for probing the local structure and dynamics in complex fluids. Although tracking translational motion of spherical colloids is well-known, accessing rotational dynamics of such particles remains a great challenge. Here, we report a novel approach of using fluorescently labeled raspberry-like colloids with…
▽ More
Real time visualization and tracking of colloidal particles with 3D resolution is essential for probing the local structure and dynamics in complex fluids. Although tracking translational motion of spherical colloids is well-known, accessing rotational dynamics of such particles remains a great challenge. Here, we report a novel approach of using fluorescently labeled raspberry-like colloids with an optical anisotropy to concurrently track translational and rotational dynamics in 3 dimensions. The raspberry-like particles are coated by a silica layer of adjustable thickness, which allows tuning the surface roughness. The synthesis and applicability of the proposed method is demonstrated by two types of probes: rough and smoothened. The accuracy of measuring Mean Squared (Angular) Displacements are also demonstrated by using these 2 probes dispersed in 2 different solvents. The presented 3D trackable colloids offer a high potential for wide range of applications and studies, such as probing crystallization dynamics, phase transitions and the effect of surface roughness on diffusion.
△ Less
Submitted 12 March, 2020;
originally announced March 2020.
-
Characterizing the fluid-matrix affinity in an organogel from the growth dynamics of oil stains on blotting paper
Authors:
Qierui Zhang,
Frieder Mugele,
Piet M. Lugt,
Dirk van den Ende
Abstract:
Grease, as used for lubrication of rolling bearings, is a two-phase organogel that slowly releases oil from its gelator matrix. Because the rate of release determines the operation time of the bearing, we study this release process by measuring the amount of extracted oil as a function of time, while we use absorbing paper, to speed up the process. The oil concentration in the resulting stain is d…
▽ More
Grease, as used for lubrication of rolling bearings, is a two-phase organogel that slowly releases oil from its gelator matrix. Because the rate of release determines the operation time of the bearing, we study this release process by measuring the amount of extracted oil as a function of time, while we use absorbing paper, to speed up the process. The oil concentration in the resulting stain is determined by measuring the attenuation of light transmitted through the paper, using a modified Lambert-Beer law. For grease the timescale for paper imbibition is typically 2 orders of magnitude larger than for a bare drop of the same base oil. This difference results from the high affinity, \it i.e. wetting energy per unit volume, of the oil for the grease matrix. To quantify this affinity, we developed a Washburn-like model describing the oil flow from the porous grease into the paper pores. The stain radius versus time curves for greases at various levels of oil content collapse onto a single master curve, which allows us to extract a characteristic spreading time and the corresponding oil-matrix affinity. Lowering the oil content results in a small increase of the oil-matrix affinity yet in a significant change in the spreading timescale. Even an affinity increase by a few per mill doubles the timescale.
△ Less
Submitted 18 September, 2019;
originally announced September 2019.
-
Behaviour of flexible superhydrophobic striped surfaces during (electro-)wetting of a sessile drop
Authors:
Arvind Arun Dev,
Ranabir Dey,
Frieder Mugele
Abstract:
We study here the microscopic deformations of elastic lamellae constituting a superhydrophobic substrate under different wetting conditions of a sessile droplet using electrowetting. The deformation profiles of the lamellae are experimentally evaluated using confocal microscopy. These experimental results are then explained using a variational principle formalism within the framework of linear ela…
▽ More
We study here the microscopic deformations of elastic lamellae constituting a superhydrophobic substrate under different wetting conditions of a sessile droplet using electrowetting. The deformation profiles of the lamellae are experimentally evaluated using confocal microscopy. These experimental results are then explained using a variational principle formalism within the framework of linear elasticity. We show that the local deformation profile of a lamella is mainly controlled by the net horizontal component of the capillary forces acting on its top due to the pinned droplet contact line. We also discuss the indirect role of electrowetting in dictating the deformation characteristics of the elastic lamellae. One important conclusion is that the small deflection assumption, which is frequently used in the literature, fails to provide a quantitative description of the experimental results; a full solution of the non-linear governing equation is necessary to describe the experimentally obtained deflection profiles.
△ Less
Submitted 12 August, 2019;
originally announced August 2019.
-
Soft electrowetting
Authors:
Ranabir Dey,
Mathijs van Gorcum,
Frieder Mugele,
Jacco H. Snoeijer
Abstract:
Electrowetting is a commonly used tool to manipulate sessile drops on hydrophobic surfaces. By applying an external voltage over a liquid and a dielectric-coated surface, one achieves a reduction of the macroscopic contact angles for increasing voltage. The electrostatic forces all play out near the contact line, on a scale of the order of the thickness of the solid dielectric layer. Here we explo…
▽ More
Electrowetting is a commonly used tool to manipulate sessile drops on hydrophobic surfaces. By applying an external voltage over a liquid and a dielectric-coated surface, one achieves a reduction of the macroscopic contact angles for increasing voltage. The electrostatic forces all play out near the contact line, on a scale of the order of the thickness of the solid dielectric layer. Here we explore the case where the dielectric is a soft elastic layer, which deforms elastically under the effect of electrostatic and capillary forces. The wetting behaviour is quantified by measurements of the static and dynamic contact angles, complemented by confocal microscopy to reveal the elastic deformations. Even though the mechanics near the contact line is highly intricate, the macroscopic contact angles can be understood from global conservation laws in the spirit of Young-Lippmann. The key finding is that, while elasticity has no effect on the static electrowetting angle, the substrate's viscoelasticity completely dictates the spreading dynamics of electrowetting.
△ Less
Submitted 25 April, 2019;
originally announced April 2019.
-
Contact angle hysteresis and oil film lubrication in electrowetting with two immiscible liquids
Authors:
Jun Gao,
Niels Mendel,
Ranabir Dey,
Davood Baratian,
Frieder Mugele
Abstract:
Electrowetting (EW) of water drops in ambient oil has found a wide range of applications including lab-on-a-chip devices, display screens, and variable focus lenses. The efficacy of all these applications is dependent on the contact angle hysteresis (CAH), which is generally reduced in the presence of ambient oil due to thin lubrication layers. While it is well-known that AC voltage reduces the ef…
▽ More
Electrowetting (EW) of water drops in ambient oil has found a wide range of applications including lab-on-a-chip devices, display screens, and variable focus lenses. The efficacy of all these applications is dependent on the contact angle hysteresis (CAH), which is generally reduced in the presence of ambient oil due to thin lubrication layers. While it is well-known that AC voltage reduces the effective contact angle hysteresis (CAH) for EW in ambient air, we demonstrate here that CAH for EW in ambient oil increases with increasing AC and DC voltage. Taking into account the disjoining pressure of the fluoropolymer-oil-water system, short range chemical interactions, viscous oil entrainment and electrostatic stresses, we find that this observation can be explained by progressive thinning of the oil layer underneath the drop with increasing voltage. This exposes the droplet to the roughness of the underlying solid and thereby increases hysteresis.
△ Less
Submitted 12 April, 2018; v1 submitted 8 January, 2018;
originally announced January 2018.
-
Nanometer-Resolved Collective Micromeniscus Oscillations through Optical Diffraction
Authors:
Helmut Rathgen,
Kazuyasu Sugiyama,
Claus-Dieter Ohl,
Detlef Lohse,
Frieder Mugele
Abstract:
We study the dynamics of periodic arrays of micrometer-sized liquid-gas menisci formed at superhydrophobic surfaces immersed into water. By measuring the intensity of optical diffraction peaks in real time we are able to resolve nanometer scale oscillations of the menisci with sub-microsecond time resolution. Upon driving the system with an ultrasound field at variable frequency we observe a pro…
▽ More
We study the dynamics of periodic arrays of micrometer-sized liquid-gas menisci formed at superhydrophobic surfaces immersed into water. By measuring the intensity of optical diffraction peaks in real time we are able to resolve nanometer scale oscillations of the menisci with sub-microsecond time resolution. Upon driving the system with an ultrasound field at variable frequency we observe a pronounced resonance at a few hundred kHz, depending on the exact geometry. Modeling the system using the unsteady Stokes equation, we find that this low resonance frequency is caused by a collective mode of the acoustically coupled oscillating menisci.
△ Less
Submitted 4 December, 2007; v1 submitted 17 July, 2007;
originally announced July 2007.
-
Mixing and condensation in a wet granular medium
Authors:
Dimitrios Geromichalos,
Mika M. Kohonen,
Frieder Mugele,
Stephan Herminghaus
Abstract:
We have studied the effect of small amounts of added liquid on the dynamic behavior of a granular system consisting of a mixture of glass beads of two different sizes. Segregation of the large beads to the top of the sample is found to depend in a nontrivial way on the liquid content. A transition to viscoplastic behavior occurs at a critical liquid content, which depends upon the bead size. We…
▽ More
We have studied the effect of small amounts of added liquid on the dynamic behavior of a granular system consisting of a mixture of glass beads of two different sizes. Segregation of the large beads to the top of the sample is found to depend in a nontrivial way on the liquid content. A transition to viscoplastic behavior occurs at a critical liquid content, which depends upon the bead size. We show that this transition can be interpreted as a condensation due to the hysteretic liquid bridge forces connecting the beads, and provide the corresponding phase diagram.
△ Less
Submitted 27 February, 2003;
originally announced February 2003.
