-
Reflective Metal/Semiconductor Tunnel Junctions for Hole Injection in AlGaN UV LEDs
Authors:
Yuewei Zhang,
Sriram Krishnamoorthy,
Fatih Akyol,
Jared M. Johnson,
Andrew A. Allerman,
Michael W. Moseley,
Andrew M. Armstrong,
Jinwoo Hwang,
Siddharth Rajan
Abstract:
In this work, we investigate the use of nanoscale polarization engineering to achieve efficient hole injection from metals to ultra-wide band gap AlGaN, and we show that UV-reflective aluminum (Al) layers can be used for hole injection into p-AlGaN. The dependence of tunneling on the work function of the metal was investigated, and it was found that highly reflective Al metal layers can enable eff…
▽ More
In this work, we investigate the use of nanoscale polarization engineering to achieve efficient hole injection from metals to ultra-wide band gap AlGaN, and we show that UV-reflective aluminum (Al) layers can be used for hole injection into p-AlGaN. The dependence of tunneling on the work function of the metal was investigated, and it was found that highly reflective Al metal layers can enable efficient hole injection into p-AlGaN, despite the relatively low work function of Al. Efficient tunneling hole injection was confirmed by light emission at 326 nm with on-wafer peak external quantum efficiency and wall-plug efficiency of 2.65% and 1.55%, respectively. A high power density of 83.7 W/cm2 was measured at 1200 kA/cm2. The metal/semiconductor tunnel junction structure demonstrated here could provide significant advantages for efficient and manufacturable device topologies for high power UV emitters.
△ Less
Submitted 19 May, 2017;
originally announced May 2017.
-
Tunnel-injected sub-260 nm ultraviolet light emitting diodes
Authors:
Yuewei Zhang,
Sriram Krishnamoorthy,
Fatih Akyol,
Sanyam Bajaj,
Andrew A. Allerman,
Michael W. Moseley,
Andrew M. Armstrong,
Siddharth Rajan
Abstract:
We report on tunnel-injected deep ultraviolet light emitting diodes (UV LEDs) configured with a polarization engineered Al0.75Ga0.25N/ In0.2Ga0.8N tunnel junction structure. Tunnel-injected UV LED structure enables n-type contacts for both bottom and top contact layers. However, achieving Ohmic contact to wide bandgap n-AlGaN layers is challenging and typically requires high temperature contact me…
▽ More
We report on tunnel-injected deep ultraviolet light emitting diodes (UV LEDs) configured with a polarization engineered Al0.75Ga0.25N/ In0.2Ga0.8N tunnel junction structure. Tunnel-injected UV LED structure enables n-type contacts for both bottom and top contact layers. However, achieving Ohmic contact to wide bandgap n-AlGaN layers is challenging and typically requires high temperature contact metal annealing. In this work, we adopted a compositionally graded top contact layer for non-alloyed metal contact, and obtained a low contact resistance of Rc=4.8x10-5 Ohm cm2 on n-Al0.75Ga0.25N. We also observed a significant reduction in the forward operation voltage from 30.9 V to 19.2 V at 1 kA/cm2 by increasing the Mg doping concentration from 6.2x1018 cm-3 to 1.5x1019 cm-3. Non-equilibrium hole injection into wide bandgap Al0.75Ga0.25N with Eg>5.2 eV was confirmed by light emission at 257 nm. This work demonstrates the feasibility of tunneling hole injection into deep UV LEDs, and provides a novel structural design towards high power deep-UV emitters.
△ Less
Submitted 28 February, 2017;
originally announced March 2017.
-
Design of P-Type Cladding Layers for Tunnel-Injected UVA Light Emitting Diodes
Authors:
Yuewei Zhang,
Sriram Krishnamoorthy,
Fatih Akyol,
Andrew A. Allerman,
Michael W. Moseley,
Andrew M. Armstrong,
Siddharth Rajan
Abstract:
We discuss the engineering of p-AlGaN cladding layers for achieving efficient tunnel-injected III-Nitride ultraviolet light emitting diodes (UV LEDs) in the UV-A spectral range. We show that capacitance-voltage measurements can be used to estimate the compensation and doping in p-AlGaN layers located between the multi-quantum well region and the tunnel junction layer. By increasing the p-type dopi…
▽ More
We discuss the engineering of p-AlGaN cladding layers for achieving efficient tunnel-injected III-Nitride ultraviolet light emitting diodes (UV LEDs) in the UV-A spectral range. We show that capacitance-voltage measurements can be used to estimate the compensation and doping in p-AlGaN layers located between the multi-quantum well region and the tunnel junction layer. By increasing the p-type doping concentration to overcome the background compensation, on-wafer external quantum efficiency and wall-plug efficiency of 3.37% and 1.62% were achieved for tunnel-injected UV LEDs emitting at 325 nm. We also show that interband tunneling hole injection can be used to realize UV LEDs without any acceptor doping. The work discussed here provides new understanding of hole doping and transport in AlGaN-based UV LEDs, and demonstrates the excellent performance of tunnel-injected LEDs for the UV-A wavelength range.
△ Less
Submitted 17 August, 2016;
originally announced September 2016.
-
Design and Demonstration of Ultra Wide Bandgap AlGaN Tunnel Junctions
Authors:
Yuewei Zhang,
Sriram Krishnamoorthy,
Fatih Akyol,
Andrew A. Allerman,
Michael W. Moseley,
Andrew M. Armstrong,
Siddharth Rajan
Abstract:
Ultra violet light emitting diodes (UV LEDs) face critical limitations in both the injection efficiency and light extraction efficiency due to the resistive and absorbing p-type contact layers. In this work, we investigate the design and application of polarization engineered tunnel junctions for ultra-wide bandgap AlGaN (Al mole fraction higher than 50%) materials towards highly efficient UV LEDs…
▽ More
Ultra violet light emitting diodes (UV LEDs) face critical limitations in both the injection efficiency and light extraction efficiency due to the resistive and absorbing p-type contact layers. In this work, we investigate the design and application of polarization engineered tunnel junctions for ultra-wide bandgap AlGaN (Al mole fraction higher than 50%) materials towards highly efficient UV LEDs. We demonstrate that polarization-induced 3D charge is beneficial in reducing tunneling barriers especially for high composition AlGaN tunnel junctions. The design of graded tunnel junction structures could lead to low tunneling resistance below 10-3 Ohm cm2 and low voltage consumption below 1 V (at 1 kA/cm2) for high composition AlGaN tunnel junctions. Experimental demonstration of 292 nm emission was achieved through non-equilibrium hole injection into wide bandgap materials with bandgap energy larger than 4.7 eV, and detailed modeling of tunnel junctions shows that they can be engineered to have low resistance, and can enable efficient emitters in the UV-C wavelength range.
△ Less
Submitted 30 August, 2016;
originally announced August 2016.
-
Enhanced Light Extraction in Tunnel Junction Enabled Top Emitting UV LEDs
Authors:
Yuewei Zhang,
Andrew Allerman,
Sriram Krishnamoorthy,
Fatih Akyol,
Michael W. Moseley,
Andrew Armstrong,
Siddharth Rajan
Abstract:
The efficiency of ultra violet LEDs is critically limited by the absorption losses in p-type and metal layers. In this work, surface roughening based light extraction structures are combined with tunneling-based top-contacts to realize highly efficient top-side light extraction efficiency in UV LEDs. Surface roughening of the top n-type AlGaN contact layer is demonstrated using self-assembled Ni n…
▽ More
The efficiency of ultra violet LEDs is critically limited by the absorption losses in p-type and metal layers. In this work, surface roughening based light extraction structures are combined with tunneling-based top-contacts to realize highly efficient top-side light extraction efficiency in UV LEDs. Surface roughening of the top n-type AlGaN contact layer is demonstrated using self-assembled Ni nano-clusters as etch mask. The top surface roughened LEDs were found to enhance external quantum efficiency by over 40% for UV LEDs with a peak emission wavelength of 326 nm. The method described here can enable highly efficient UV LEDs without the need for complex manufacturing methods such as flip chip bonding.
△ Less
Submitted 7 December, 2015;
originally announced December 2015.
-
Interband Tunneling for Hole Injection in III-Nitride Ultra-violet Emitters
Authors:
Yuewei Zhang,
Sriram Krishnamoorthy,
Jared M. Johnson,
Fatih Akyol,
Andrew Allerman,
Michael W. Moseley,
Andrew Armstrong,
Jinwoo Hwang,
Siddharth Rajan
Abstract:
Ultra-violet emitters have several applications in the areas of sensing, water purification, and data storage. While the III-Nitride semiconductor system has the band gap region necessary for ultraviolet emission, achieving efficient ultraviolet solid state emitters remains a challenge due to the low p-type conductivity and high contact resistance in wide band gap AlGaN-based ultra-violet light em…
▽ More
Ultra-violet emitters have several applications in the areas of sensing, water purification, and data storage. While the III-Nitride semiconductor system has the band gap region necessary for ultraviolet emission, achieving efficient ultraviolet solid state emitters remains a challenge due to the low p-type conductivity and high contact resistance in wide band gap AlGaN-based ultra-violet light emitters. In this work, we show that efficient interband tunneling can be used for non-equilibrium injection of holes into ultraviolet emitters. Polarization-engineered tunnel junctions were used to enhance tunneling probability by several orders of magnitude over a PN homojunction, leading to highly efficient tunnel injection of holes to ultraviolet light emitters. This demonstration of efficient interband tunneling introduces a new paradigm for design of ultra-violet light emitting diodes and diode lasers, and enables higher efficiency and lower cost ultra-violet emitters.
△ Less
Submitted 6 February, 2015;
originally announced February 2015.
