-
Plasmon Soft Mode in an Organic-Inorganic Hybrid Perovskite
Authors:
Jiyu Tian,
Karuna Kara Mishra,
Eli Zysman-Colman,
Finlay D. Morrison,
Ram S. Katiyar,
James F. Scott
Abstract:
We report inelastic light scattering from underdamped plasmons in azetidinium lead bromide (AzPbBr3). The plasmons are very strongly temperature dependent and serve as a soft mode for the semiconductor-insulator phase transition near TC » 150 K, demonstrating a continuous decrease in hole concentration np(T) by at least a factor of four and implying a nearly tricritical transition. The plasmon fre…
▽ More
We report inelastic light scattering from underdamped plasmons in azetidinium lead bromide (AzPbBr3). The plasmons are very strongly temperature dependent and serve as a soft mode for the semiconductor-insulator phase transition near TC » 150 K, demonstrating a continuous decrease in hole concentration np(T) by at least a factor of four and implying a nearly tricritical transition. The plasmon frequency and linewidth agree with independent measurements, and the impedance analysis reveals a frequency dependence (modelled by a constant phase element, CPE) that can be identified as due to electron-phonon coupling. The dependence of plasmon frequency upon (TC-T) is analogous to that for magnons in magnetic insulators or soft transverse optical phonons in ferroelectrics and ferroelastics, or for phasons in incommensurately modulated insulators.
△ Less
Submitted 16 April, 2019;
originally announced April 2019.
-
Studies of Barkhausen Pulses in Ferroelectrics
Authors:
C. D. Tan,
J. Gardner,
F. D. Morrison,
E. K. H. Salje,
J. F. Scott
Abstract:
Systems that produce crackling noises such as Barkhausen pulses are statistically similar and can be compared with one another. In this project, the Barkhausen noise of three ferroelectric lead zirconate titanate (PZT) samples were demonstrated to be compatible with avalanche statistics. The peaks of the slew-rate (time derivative of current $dI/dt$) squared, defined as jerks, were statistically a…
▽ More
Systems that produce crackling noises such as Barkhausen pulses are statistically similar and can be compared with one another. In this project, the Barkhausen noise of three ferroelectric lead zirconate titanate (PZT) samples were demonstrated to be compatible with avalanche statistics. The peaks of the slew-rate (time derivative of current $dI/dt$) squared, defined as jerks, were statistically analysed and shown to obey power-laws. The critical exponents obtained for three PZT samples (B, F and S) were 1.73, 1.64 and 1.61, respectively, with a standard deviation of 0.04. This power-law behaviour is in excellent agreement with recent theoretical predictions of 1.65 in avalanche theory. If these critical exponents do resemble energy exponents, they were above the energy exponent 1.33 derived from mean-field theory. Based on the power-law distribution of the jerks, we demonstrate that domain switching display self-organised criticality and that Barkhausen jumps measured as electrical noise follows avalanche theory.
△ Less
Submitted 7 June, 2018; v1 submitted 22 May, 2018;
originally announced May 2018.
-
Quantum Critical Points in Ferroelectric Relaxors: Stuffed Tungsten Bronze K3Li2Ta5O15 and Lead Pyrochlore (Pb2Nb2O7)
Authors:
Rebecca M. Smith,
Jonathan Gardner,
Finlay D. Morrison,
Stephen E. Rowley,
Catarina Ferraz,
M. A. Carpenter,
Jiasheng Chen,
Jack Hodkinson,
Siân E. Dutton,
J. F. Scott
Abstract:
We have synthesised ceramic specimens of the tetragonal tungsten bronze K3Li2Ta5O15 (KLT) and characterized its phase transition via X-ray, dielectric permittivity, ultrasonic spectroscopy and heat capacity measurements. The space group of KLT is reported as both P4/mbm or Cmmm with the orthorhombic distortion occurring when there are higher partial pressures of volatile K and Li used within the c…
▽ More
We have synthesised ceramic specimens of the tetragonal tungsten bronze K3Li2Ta5O15 (KLT) and characterized its phase transition via X-ray, dielectric permittivity, ultrasonic spectroscopy and heat capacity measurements. The space group of KLT is reported as both P4/mbm or Cmmm with the orthorhombic distortion occurring when there are higher partial pressures of volatile K and Li used within the closed crucibles for the solid state synthesis. The data show strong relaxor behaviour, with the temperature at which the two dielectric relative permittivity peaks decreasing with 104 K $\geqslant$ Tm1 $\geqslant$ 69 K and 69 K $\geqslant$ Tm2 $\geqslant$ 46 K as probe frequency f is reduced from 1 MHz to 316 Hz. The data satisfy a Vogel-Fulcher model with an extrapolated freezing temperature for ε' and ε" of Tf1 = + 15.8 and - 11.8 K and Tf2 = - 5.0 and - 15.0 K for f $\rightarrow$ 0 (tending to dc). Therefore by tuning frequency, the transition could be shifted to absolute zero suggesting KLT has a relaxor-type quantum critical point. In addition, we have reanalysed the conflicting literature for Pb2Nb2O7 pyrochlore which suggests that this is also a relaxor-type quantum critical point as the freezing temperature from Vogel-Fulcher fitting is below absolute zero. Since the transition temperature evidenced in the dielectric data at ca. 100 kHz shifts below zero Kelvin for very low frequencies, heat capacity data collected in the zero-frequency (dc) limit, should not indicate a transition. Both of these materials show promise as possible new relaxor-type quantum critical points within non-perovskite based structures as multiple compounds are reported with low-temperature transitions.
△ Less
Submitted 27 February, 2018;
originally announced February 2018.
-
Quantum percolation phase transition and magneto-electric dipole glass in hexagonal ferrites
Authors:
S. E. Rowley,
T. Vojta,
A. T. Jones,
W. Guo,
J. Oliveira,
F. D. Morrison,
N. Lindfield,
E. Baggio Saitovitch,
B. E. Watts,
J. F. Scott
Abstract:
Hexagonal ferrites do not only have enormous commercial impact (£2 billion/year in sales) due to applications that include ultra-high density memories, credit card stripes, magnetic bar codes, small motors and low-loss microwave devices, they also have fascinating magnetic and ferroelectric quantum properties at low temperatures. Here we report the results of tuning the magnetic ordering temperatu…
▽ More
Hexagonal ferrites do not only have enormous commercial impact (£2 billion/year in sales) due to applications that include ultra-high density memories, credit card stripes, magnetic bar codes, small motors and low-loss microwave devices, they also have fascinating magnetic and ferroelectric quantum properties at low temperatures. Here we report the results of tuning the magnetic ordering temperature in PbFe$_{12-x}$Ga$_x$O$_{19}$ to zero by chemical substitution $x$. The phase transition boundary is found to vary as $T_N \sim (1-x/x_c)^{2/3}$ with $x_c$ very close to the calculated spin percolation threshold which we determine by Monte Carlo simulations, indicating that the zero-temperature phase transition is geometrically driven. We find that this produces a form of compositionally-tuned, insulating, ferrimagnetic quantum criticality. Close to the zero temperature phase transition we observe the emergence of an electric-dipole glass induced by magneto-electric coupling. The strong frequency behaviour of the glass freezing temperature $T_m$ has a Vogel-Fulcher dependence with $T_m$ finite, or suppressed below zero in the zero frequency limit, depending on composition $x$. These quantum-mechanical properties, along with the multiplicity of low-lying modes near to the zero-temperature phase transition, are likely to greatly extend applications of hexaferrites into the realm of quantum and cryogenic technologies.
△ Less
Submitted 13 August, 2017;
originally announced August 2017.
-
PbTi1-xPdxO3: A New Room-temperature Magnetoelectric Multiferroic Device Material
Authors:
Elzbieta Gradauskaite,
Jonathan Gardner,
Rebecca M. Smith,
Finlay D. Morrison,
Stephen L. Lee,
Ram S. Katiyar,
James F. Scott
Abstract:
There have been a large number of papers on bismuth ferrite (BiFeO3) over the past few years, trying to exploit its room-temperature magnetoelectric multiferroic properties. Although these are attractive, BiFeO3 is not the ideal multiferroic, due to weak magnetization and the difficulty in limiting leakage currents. Thus there is an ongoing search for alternatives, including such materials as gall…
▽ More
There have been a large number of papers on bismuth ferrite (BiFeO3) over the past few years, trying to exploit its room-temperature magnetoelectric multiferroic properties. Although these are attractive, BiFeO3 is not the ideal multiferroic, due to weak magnetization and the difficulty in limiting leakage currents. Thus there is an ongoing search for alternatives, including such materials as gallium ferrite (GaFeO3). In the present work we report a comprehensive study of the perovskite PbTi1-xPdxO3 with 0 < x < 0.3. Our study includes dielectric, impedance and magnetization measurements, conductivity analysis and study of crystallographic phases present in the samples with special attention paid to minor phases, identified as PdO, PbPdO2, and Pd3Pb. The work is remarkable in two ways: Pd is difficult to substitute into ABO3 perovskite oxides (where it might be useful for catalysis), and Pd is magnetic under only unusual conditions (under strain or internal electric fields). The new material, as a PZT derivative, is expected to have much stronger piezoelectric properties than BiFeO3.
△ Less
Submitted 7 June, 2017;
originally announced June 2017.
-
Ferrielectricity in an Organic Ferroelectric
Authors:
James F. Scott,
Finlay D. Morrison,
Rebecca Clulow,
Philip Lightfoot,
Aurora Gherson,
Sylvia C. Capelli,
Michael R. Probert,
S. Sahoo,
James S. Young,
Ram S. Katiyar
Abstract:
We report ferrielectricity in a single-phase crystal, TSCC -- tris-sarcosine calcium chloride [(CH3NHCH2COOH)3CaCl2]. Ferrielectricity is well known in smectic liquid crystals but almost unknown in true crystalline solids. Pulvari reported it in 1960 in mixtures of ferroelectrics and antiferroelectrics, but only at high fields. TSCC exhibits a second-order displacive phase transition near Tc = 130…
▽ More
We report ferrielectricity in a single-phase crystal, TSCC -- tris-sarcosine calcium chloride [(CH3NHCH2COOH)3CaCl2]. Ferrielectricity is well known in smectic liquid crystals but almost unknown in true crystalline solids. Pulvari reported it in 1960 in mixtures of ferroelectrics and antiferroelectrics, but only at high fields. TSCC exhibits a second-order displacive phase transition near Tc = 130 K that can be lowered to a Quantum Critical Point at zero Kelvin via Br- or I-substitution, and phases predicted to be antiferroelectric at high pressure and low temperatures. Unusually, the size of the primitive unit cell does not increase. We measure hysteresis loops and polarization below T = 64 K and clear Raman evidence for this transition, as well of another transition near 47-50 K. X-ray and neutron studies below Tc = 130K show there is an antiferroelectric displacement out of plane of two sarcosine groups; but these are antiparallel displacements are of different magnitude, leading to a bias voltage that grows with decreasing T. A monoclinic subgroup C2 may be possible at the lowest temperatures (T<64K or T<48K), but no direct evidence exists for a crystal class lower than orthorhombic.
△ Less
Submitted 18 June, 2016;
originally announced June 2016.
-
Origin and stability of the dipolar response in a family of tetragonal tungsten bronze relaxors
Authors:
Andrei Rotaru,
Donna C. Arnold,
Aziz Daoud-Aladine,
Finlay D. Morrison
Abstract:
A new family of relaxor dielectrics with the tetragonal tungsten bronze structure (nominal composition Ba6M3+Nb9O30, M3+ = Ga, Sc or In) were studied using dielectric spectroscopy to probe the dynamic dipole response and correlate this with the crystal structure as determined from powder neutron diffraction. Independent analyses of real and imaginary parts of the complex dielectric function were u…
▽ More
A new family of relaxor dielectrics with the tetragonal tungsten bronze structure (nominal composition Ba6M3+Nb9O30, M3+ = Ga, Sc or In) were studied using dielectric spectroscopy to probe the dynamic dipole response and correlate this with the crystal structure as determined from powder neutron diffraction. Independent analyses of real and imaginary parts of the complex dielectric function were used to determine characteristic temperature parameters, TVF, and TUDR, respectively. In each composition both these temperatures correlated with the temperature of maximum crystallographic strain, Tc/a determined from diffraction data. The overall behaviour is consistent with dipole freezing and the data indicate that the dipole stability increases with increasing M3+ cation size as a result of increased tetragonality of the unit cell. Crystallographic data suggests that these materials are uniaxial relaxors with the dipole moment predominantly restricted to the B1 cation site in the structure. Possible origins of the relaxor behaviour are discussed.
△ Less
Submitted 8 April, 2011;
originally announced April 2011.
-
The beta to gamma (insulator-metal) transition in BiFeO3
Authors:
Donna C. Arnold,
Kevin S. Knight,
Gustau Catalan,
Simon A. T. Redfern,
James F. Scott,
Philip Lightfoot,
Finlay D. Morrison
Abstract:
High temperature powder neutron diffraction experiments have been conducted around the reported beta-gamma, insulator-metal phase transition (~ 930 C) in BiFeO3. The results demonstrate that while a small volume contraction is observed at the transition temperature, consistent with an insulator-metal transition, both the beta and gamma phase of BiFeO3 exhibit orthorhombic symmetry i.e. no furthe…
▽ More
High temperature powder neutron diffraction experiments have been conducted around the reported beta-gamma, insulator-metal phase transition (~ 930 C) in BiFeO3. The results demonstrate that while a small volume contraction is observed at the transition temperature, consistent with an insulator-metal transition, both the beta and gamma phase of BiFeO3 exhibit orthorhombic symmetry i.e. no further increase of symmetry occurs under the present experimental conditions, contrary to previous suggestions. Furthermore we observe the gamma orthorhombic phase to persist up to a temperature of approximately 950 C before complete decomposition into Bi2Fe4O9 (and liquid Bi2O3), which subsequently begins to decompose at approximately 960 C.
△ Less
Submitted 13 November, 2009; v1 submitted 25 August, 2009;
originally announced August 2009.
-
The ferroelectric-paraelectric phase transition in BiFeO3: crystal structure of the orthorhombic beta-phase
Authors:
Donna C. Arnold,
Kevin S. Knight,
Finlay D. Morrison,
Philip Lightfoot
Abstract:
A detailed investigation using variable temperature powder neutron diffraction demonstrates that BiFeO3 undergoes a phase transition from the ferroelectric alpha phase (rhombohedral, R3c) to a paraelectric beta phase (orthorhombic, Pbnm) between 820 oC and 830 oC. Co-existence of both phases over a finite temperature interval, together with abrupt changes in key structural parameters, confirm th…
▽ More
A detailed investigation using variable temperature powder neutron diffraction demonstrates that BiFeO3 undergoes a phase transition from the ferroelectric alpha phase (rhombohedral, R3c) to a paraelectric beta phase (orthorhombic, Pbnm) between 820 oC and 830 oC. Co-existence of both phases over a finite temperature interval, together with abrupt changes in key structural parameters, confirm that the transition is firstorder. The beta phase corresponds to the GdFeO3-type perovskite. The metastability of BiFeO3 relative to Bi2Fe4O9 above 810 oC precludes observation of a reported cubic gamma phase above 925 oC under the present experimental conditions.
△ Less
Submitted 10 November, 2008;
originally announced November 2008.
-
Conformal oxide coating of Carbon Nanotubes
Authors:
S. Kawasaki,
G. Catalan,
H. Fan,
M. M. Saad,
J. M. Gregg,
M. A. Correa-Duarte,
J. Rybczynski,
F. D. Morrison,
T. Tatsuta,
O. Tsuji,
J. F. Scott
Abstract:
The International Roadmap for Ferroelectric Memories requires three-dimensional integration of high-dielectric materials onto metal interconnects or bottom electrodes by 2010. We report the first integration of high-dielectric oxide films onto carbon nanotube electrodes with an aim of ultra-high integration density of FeRAMs (Tb/in2).
The International Roadmap for Ferroelectric Memories requires three-dimensional integration of high-dielectric materials onto metal interconnects or bottom electrodes by 2010. We report the first integration of high-dielectric oxide films onto carbon nanotube electrodes with an aim of ultra-high integration density of FeRAMs (Tb/in2).
△ Less
Submitted 20 June, 2007;
originally announced June 2007.
-
Impedance spectroscopy of epitaxial multiferroic thin films
Authors:
Rainer Schmidt,
Wilma Eerenstein,
Thomas Winiecki,
Finlay D. Morrison,
Paul A. Midgley
Abstract:
Temperature dependent impedance spectroscopy enables the many contributions to the dielectric and resistive properties of condensed matter to be deconvoluted and characterized separately. We have achieved this for multiferroic epitaxial thin films of BiFeO3 (BFO) and BiMnO3 (BMO), key examples of materials with strong magneto-electric coupling. We demonstrate that the true film capacitance of th…
▽ More
Temperature dependent impedance spectroscopy enables the many contributions to the dielectric and resistive properties of condensed matter to be deconvoluted and characterized separately. We have achieved this for multiferroic epitaxial thin films of BiFeO3 (BFO) and BiMnO3 (BMO), key examples of materials with strong magneto-electric coupling. We demonstrate that the true film capacitance of the epitaxial layers is similar to that of the electrode interface, making analysis of capacitance as a function of film thickness necessary to achieve deconvolution. We modeled non-Debye impedance response using Gaussian distributions of relaxation times and reveal that conventional resistivity measurements on multiferroic layers may be dominated by interface effects. Thermally activated charge transport models yielded activation energies of 0.60 eV +- 0.05 eV (BFO) and 0.25 eV +- 0.03 eV (BMO), which is consistent with conduction dominated by oxygen vacancies (BFO) and electron hopping (BMO). The intrinsic film dielectric constants were determined to be 320 +- 75 (BFO) and 450 +- 100 (BMO).
△ Less
Submitted 24 April, 2007;
originally announced April 2007.
-
High-Field Conduction in Barium Titanate
Authors:
J. F. Scott,
F. D. Morrison,
P. Zubko,
D. J. Jung,
P. Baxter,
M. M. Saad,
J. M. Gregg,
R. M. Bowman
Abstract:
We present current-voltage studies of very thin (ca. 77 nm) barium titanate single crystals up to 1.3 GV/m applied field. These show that the mechanism of leakage current at high fields is that of space charge limited conduction (SCLC) in a regime with a continuous distribution of traps, according to the original model of Rose [Phys. Rev. 97, 1537 (1955)]. This study represents a factor of x5 in…
▽ More
We present current-voltage studies of very thin (ca. 77 nm) barium titanate single crystals up to 1.3 GV/m applied field. These show that the mechanism of leakage current at high fields is that of space charge limited conduction (SCLC) in a regime with a continuous distribution of traps, according to the original model of Rose [Phys. Rev. 97, 1537 (1955)]. This study represents a factor of x5 in field compared with the early studies of BaTiO3 conduction [A. Branwood et al., Proc. Phys. Soc. London 79, 1161 (1962)]. Comparison is also given with ceramic multilayer barium titanate capacitors, which show similar SCLC behaviour. The data are shown to be completely incompatible with variable range hopping [B. I. Shklovskii, Sov. Phys. Semicond. 6, 1964 (1973)], despite the recent report of such mechanism in SrTiO3 films [D. Fuchs, M. Adam, and R. Schneider, J. Phys. IV France 11, 71 (2001)].
△ Less
Submitted 22 September, 2004;
originally announced September 2004.
-
Ferroelectric Nanotubes
Authors:
F. D. Morrison,
Y. Luo,
I. Szafraniak,
V. Nagarajan,
R. B. Wehrspohn,
M. Steinhart,
J. H. Wendroff,
N. D. Zakharov,
E. D. Mishina,
K. A. Vorotilov,
A. S. Sigov,
S. Nakabayashi,
M. Alexe,
R. Ramesh,
J. F. Scott
Abstract:
We report the independent invention of ferroelectric nanotubes from groups in several countries. Devices have been made with three different materials: lead zirconate-titanate PbZr1-xTixO3 (PZT); barium titanate BaTiO3; and strontium bismuth tantalate SrBi2Ta2O9 (SBT). Several different deposition techniques have been used successfully, including misted CSD (chemical solution deposition) and por…
▽ More
We report the independent invention of ferroelectric nanotubes from groups in several countries. Devices have been made with three different materials: lead zirconate-titanate PbZr1-xTixO3 (PZT); barium titanate BaTiO3; and strontium bismuth tantalate SrBi2Ta2O9 (SBT). Several different deposition techniques have been used successfully, including misted CSD (chemical solution deposition) and pore wetting. Ferroelectric hysteresis and high optical nonlinearity have been demonstrated. The structures are analyzed via SEM, TEM, XRD, AFM (piezo-mode), and SHG. Applications to trenching in Si dynamic random access memories, ink-jet printers, and photonic devices are discussed. Ferroelectric filled pores as small as 20 nm in diameter have been studied.
△ Less
Submitted 28 March, 2003;
originally announced March 2003.
