-
Tuneable optical gain and broadband lasing driven in electrospun polymer fibers by high dye concentration
Authors:
Giovanni Morello,
Maria Moffa,
Martina Montinaro,
Annachiara Albanese,
Karolis Kazlauskas,
Saulius Jursenas,
Ausra Tomkeviciene,
Juozas V. Grazulevicius,
Andrea Camposeo,
Dario Pisignano
Abstract:
The optical gain of blue light-emitting electrospun polystyrene fibers doped with a linear multi-fragment molecular dye based on the combination of fluorine-carbazole functional units is investigated, with the aim of correlating emission properties and the specific material architecture made of either aligned or disordered fibers. Enhanced performance is found in aligned fibers, whose gain spectru…
▽ More
The optical gain of blue light-emitting electrospun polystyrene fibers doped with a linear multi-fragment molecular dye based on the combination of fluorine-carbazole functional units is investigated, with the aim of correlating emission properties and the specific material architecture made of either aligned or disordered fibers. Enhanced performance is found in aligned fibers, whose gain spectrum can be finely tuned by varying the dye concentration. Instead, randomly oriented fibers show a manifold spectral line narrowing, resulting in sharp laser peaks superimposed on top of a broad emission band, ascribable to random lasing. In these systems, the increase of the dye content turns out to be effective for both decreasing the lasing threshold by about a factor 6 and for varying the laser emission wavelength. These results make these arrays and disordered architectures of fibers valuable active media for variable-gain, broadband lasing, which is remarkably important in optical sensing and tunable microlaser devices.
△ Less
Submitted 31 May, 2023;
originally announced May 2023.
-
Dye stabilization and wavelength tunability in lasing fibers based on DNA
Authors:
Luana Persano,
Adam Szukalski,
Michele Gaio,
Maria Moffa,
Giacomo Salvadori,
Lech Sznitko,
Andrea Camposeo,
Jaroslaw Mysliwiec,
Riccardo Sapienza,
Benedetta Mennucci,
Dario Pisignano
Abstract:
Lasers based on biological materials are attracting an increasing interest in view of their use in integrated and transient photonics. DNA as optical biopolymer in combination with highly-emissive dyes has been reported to have excellent potential in this respect, however achieving miniaturized lasing systems based on solid-state DNA shaped in different geometries to confine and enhance emission i…
▽ More
Lasers based on biological materials are attracting an increasing interest in view of their use in integrated and transient photonics. DNA as optical biopolymer in combination with highly-emissive dyes has been reported to have excellent potential in this respect, however achieving miniaturized lasing systems based on solid-state DNA shaped in different geometries to confine and enhance emission is still a challenge, and physico-chemical mechanisms originating fluorescence enhancement are not fully understood. Herein, a class of wavelength-tunable lasers based on DNA nanofibers is demonstrated, for which optical properties are highly controlled through the system morphology. A synergistic effect is highlighted at the basis of lasing action. Through a quantum chemical investigation, we show that the interaction of DNA with the encapsulated dye leads to hindered twisting and suppressed channels for the non-radiative decay. This is combined with effective waveguiding, optical gain, and tailored mode confinement to promote morphologically-controlled lasing in DNA-based nanofibers. The results establish design rules for the development of bright and tunable nanolasers and optical networks based on DNA nanostructures.
△ Less
Submitted 5 December, 2020;
originally announced December 2020.
-
Nanowire-Intensified MEF in Hybrid Polymer-Plasmonic Electrospun Filaments
Authors:
Andrea Camposeo,
Radoslaw Jurga,
Maria Moffa,
Alberto Portone,
Francesco Cardarelli,
Fabio Della Sala,
Cristian Ciracì,
Dario Pisignano
Abstract:
Hybrid polymer-plasmonic nanostructures might combine high enhancement of localized fields from metal nanoparticles with light confinement and long-range transport in subwavelength dielectric structures. Here we report on the complex behavior of fluorophores coupling to Au nanoparticles within polymer nanowires, which features localized metal-enhanced fluorescence (MEF) with unique characteristics…
▽ More
Hybrid polymer-plasmonic nanostructures might combine high enhancement of localized fields from metal nanoparticles with light confinement and long-range transport in subwavelength dielectric structures. Here we report on the complex behavior of fluorophores coupling to Au nanoparticles within polymer nanowires, which features localized metal-enhanced fluorescence (MEF) with unique characteristics compared to conventional structures. The intensification effect when the particle is placed in the organic filaments is remarkably higher with respect to thin films of comparable thickness, thus highlighting a specific, nanowire-related enhancement of MEF effects. A dependence on the confinement volume in the dielectric nanowire is also evidenced, with MEF significantly increasing upon reducing the wire diameter. These findings are rationalized by finite element simulations, predicting a position-dependent enhancement of the quantum yield of fluorophores embedded in the fibers. Calculation of the ensemble-averaged fluorescence enhancement unveils the possibility of strongly enhancing the overall emission intensity for structures with size twice the diameter of the embedded metal particles. These new, hybrid fluorescent systems with localized enhanced emission, as well as the general Nanowire-Intensified MEF effect associated to them, are highly relevant for developing nanoscale light-emitting devices with high efficiency and inter-coupled through nanofiber networks, highly sensitive optical sensors, and novel laser architectures.
△ Less
Submitted 15 April, 2018;
originally announced April 2018.
-
Electrospun Conjugated Polymer/Fullerene Hybrid Fibers: Photoactive Blends, Conductivity through Tunnelling-AFM, Light-Scattering, and Perspective for Their Use in Bulk-Heterojunction Organic Solar Cells
Authors:
Zhenhua Yang,
Maria Moffa,
Ying Liu,
Hongfei Li,
Luana Persano,
Andrea Camposeo,
Rosalba Saija,
Maria Antonia Iatì,
Onofrio M. Maragò,
Dario Pisignano,
Chang-Yong Nam,
Eyal Zussman,
Miriam Rafailovich
Abstract:
Hybrid conjugated polymer/fullerene filaments based on MEH-PPV/PVP/PCBM are prepared by electrospinning, and their properties assessed by scanning electron, atomic and lateral force, tunnelling, and confocal microscopy, as well as by attenuated total reflection Fourier transform-infrared spectroscopy, photoluminescence quantum yield and spatially-resolved fluorescence. Highlighted features include…
▽ More
Hybrid conjugated polymer/fullerene filaments based on MEH-PPV/PVP/PCBM are prepared by electrospinning, and their properties assessed by scanning electron, atomic and lateral force, tunnelling, and confocal microscopy, as well as by attenuated total reflection Fourier transform-infrared spectroscopy, photoluminescence quantum yield and spatially-resolved fluorescence. Highlighted features include ribbon-shape of the realized fibers, and the persistence of a network serving as a template for heterogeneous active layers in solar cell devices. A set of favorable characteristics is evidenced in this way in terms of homogeneous charge transport behavior and formation of effective interfaces for diffusion and dissociation of photogenerated excitons. The interaction of the organic filaments with light, exhibiting specific light-scattering properties of the nanofibrous mat, might also contribute to spreading incident radiation across the active layers, thus potentially enhancing photovoltaic performance. This method might be applied to other electron donor-electron acceptor material systems for the fabrication of solar cell devices enhanced by nanofibrillar morphologies embedding conjugated polymers and fullerene compounds.
△ Less
Submitted 26 January, 2018;
originally announced January 2018.
-
Highly sticky surfaces made by electrospun polymer nanofibers
Authors:
S. Varagnolo,
F. Raccanello,
M. Pierno,
G. Mistura,
M. Moffa,
L. Persano,
D. Pisignano
Abstract:
We report on a comprehensive study of the unique adhesive properties of mats of polymethylmethacrylate (PMMA) nanofibers produced by electrospinning. Fibers are deposited on glass, varying the diameter and the relative orientation of the polymer filaments (random vs aligned configuration). While no significant variation is observed in the static contact angle (about 130°) of deposited water drops…
▽ More
We report on a comprehensive study of the unique adhesive properties of mats of polymethylmethacrylate (PMMA) nanofibers produced by electrospinning. Fibers are deposited on glass, varying the diameter and the relative orientation of the polymer filaments (random vs aligned configuration). While no significant variation is observed in the static contact angle (about 130°) of deposited water drops upon changing the average fiber diameter up to the micrometer scale, fibers are found to exhibit unequalled water adhesion. Placed vertically, they can hold up water drops as large as 60 microL, more than twice the values typically obtained with hairy surfaces prepared by different methods. For aligned fibers with anisotropic wetting behavior, the maximum volume measured in the direction perpendicular to the fibers goes up to 90 μL. This work suggests new routes to tailor the wetting behavior on extended areas by nanofiber coatings, with possible applications in adsorbing and catalytic surfaces, microfluidic devices, and filtration technologies.
△ Less
Submitted 18 January, 2017;
originally announced January 2017.
-
Anisotropic conjugated polymer chain conformation tailors the energy migration in nanofibers
Authors:
Andrea Camposeo,
Ryan D. Pensack,
Maria Moffa,
Vito Fasano,
Davide Altamura,
Cinzia Giannini,
Dario Pisignano,
Gregory D. Scholes
Abstract:
Conjugated polymers are complex multi-chromophore systems, with emission properties strongly dependent on the electronic energy transfer through active sub-units. Although the packing of the conjugated chains in the solid state is known to be a key factor to tailor the electronic energy transfer and the resulting optical properties, most of the current solution-based processing methods do not allo…
▽ More
Conjugated polymers are complex multi-chromophore systems, with emission properties strongly dependent on the electronic energy transfer through active sub-units. Although the packing of the conjugated chains in the solid state is known to be a key factor to tailor the electronic energy transfer and the resulting optical properties, most of the current solution-based processing methods do not allow for effectively controlling the molecular order, thus making the full unveiling of energy transfer mechanisms very complex. Here we report on conjugated polymer fibers with tailored internal molecular order, leading to a significant enhancement of the emission quantum yield. Steady state and femtosecond time-resolved polarized spectroscopies evidence that excitation is directed toward those chromophores oriented along the fiber axis, on a typical timescale of picoseconds. These aligned and more extended chromophores, resulting from the high stretching rate and electric field applied during the fiber spinning process, lead to improved emission properties. Conjugated polymer fibers are relevant to develop optoelectronic plastic devices with enhanced and anisotropic properties.
△ Less
Submitted 18 November, 2016;
originally announced November 2016.
-
Threading Through Macrocycles Enhances the Performance of Carbon Nanotubes as Polymer Fillers
Authors:
A. López-Moreno,
B. Nieto-Ortega,
M. Moffa,
A. de Juan,
M. Mar Bernal,
J. P. Fernández-Blázquez,
J. J. Vilatela,
D. Pisignano,
E. M. Pérez
Abstract:
In this work we study the reinforcement of polymers by mechanically interlocked derivatives of single-walled carbon nanotubes (SWNTs). We compare the mechanical properties of fibers made of polymers and of composites with pristine single-walled carbon nanotubes (SWNTs), mechanically interlocked derivatives of SWNTs (MINTs) and the corresponding supramolecular models. Improvements of both Young's m…
▽ More
In this work we study the reinforcement of polymers by mechanically interlocked derivatives of single-walled carbon nanotubes (SWNTs). We compare the mechanical properties of fibers made of polymers and of composites with pristine single-walled carbon nanotubes (SWNTs), mechanically interlocked derivatives of SWNTs (MINTs) and the corresponding supramolecular models. Improvements of both Young's modulus and tensile strength of up to 200 % were observed for the polystyrene-MINTs samples with an optimized loading of just 0.01 wt.%, while the supramolecular models with identical chemical composition and loading showed negligible or even detrimental influence. This behavior is found for three different types of SWNTs and two types of macrocycles. Molecular dynamics simulations show that the polymer adopts an elongated conformation parallel to the SWNT when interacting with MINT fillers, irrespective of the macrocycle chemical nature, whereas a more globular structure is taken upon facing with either pristine SWNTs or supramolecular models. The MINT composite architecture thus leads to a more efficient exploitation of the axial properties of the SWNTs and of the polymer chain at the interface, in agreement with experimental results. Our findings demonstrate that the mechanical bond imparts distinctive advantageous properties to SWNT derivatives as polymer fillers.
△ Less
Submitted 2 August, 2016;
originally announced August 2016.
-
Optimization of electrospinning techniques for the realization of nanofiber plastic lasers
Authors:
L. Persano,
M. Moffa,
V. Fasano,
M. Montinaro,
G. Morello,
V. Resta,
D. Spadaro,
P. G. Gucciardi,
O. M. Maragò,
A. Camposeo,
D. Pisignano
Abstract:
Electrospinning technologies for the realization of active polymeric nanomaterials can be easily up-scaled, opening perspectives to industrial exploitation, and due to their versatility they can be employed to finely tailor the size, morphology and macroscopic assembly of fibers as well as their functional properties. Light-emitting or other active polymer nanofibers, made of conjugated polymers o…
▽ More
Electrospinning technologies for the realization of active polymeric nanomaterials can be easily up-scaled, opening perspectives to industrial exploitation, and due to their versatility they can be employed to finely tailor the size, morphology and macroscopic assembly of fibers as well as their functional properties. Light-emitting or other active polymer nanofibers, made of conjugated polymers or of blends embedding chromophores or other functional dopants, are suitable for various applications in advanced photonics and sensing technologies. In particular, their almost one-dimensional geometry and finely tunable composition make them interesting materials for developing novel lasing devices. However, electrospinning techniques rely on a large variety of parameters and possible experimental geometries, and they need to be carefully optimized in order to obtain suitable topographical and photonic properties in the resulting nanostructures. Targeted features include smooth and uniform fiber surface, dimensional control, as well as filament alignment, enhanced light emission, and stimulated emission. We here present various optimization strategies for electrospinning methods which have been implemented and developed by us for the realization of lasing architectures based on polymer nanofibers. The geometry of the resulting nanowires leads to peculiar light-scattering from spun filaments, and to controllable lasing characteristics.
△ Less
Submitted 25 March, 2016;
originally announced March 2016.
-
Control of photon transport properties in nanocomposite nanowires
Authors:
M. Moffa,
V. Fasano,
A. Camposeo,
L. Persano,
D. Pisignano
Abstract:
Active nanowires and nanofibers can be realized by the electric-field induced stretching of polymer solutions with sufficient molecular entanglements. The resulting nanomaterials are attracting an increasing attention in view of their application in a wide variety of fields, including optoelectronics, photonics, energy harvesting, nanoelectronics, and microelectromechanical systems. Realizing nano…
▽ More
Active nanowires and nanofibers can be realized by the electric-field induced stretching of polymer solutions with sufficient molecular entanglements. The resulting nanomaterials are attracting an increasing attention in view of their application in a wide variety of fields, including optoelectronics, photonics, energy harvesting, nanoelectronics, and microelectromechanical systems. Realizing nanocomposite nanofibers is especially interesting in this respect. In particular, methods suitable for embedding inorganic nanocrystals in electrified jets and then in active fiber systems allow for controlling light-scattering and refractive index properties in the realized fibrous materials. We here report on the design, realization, and morphological and spectroscopic characterization of new species of active, composite nanowires and nanofibers for nanophotonics. We focus on the properties of light-confinement and photon transport along the nanowire longitudinal axis, and on how these depend on nanoparticle incorporation. Optical losses mechanisms and their influence on device design and performances are also presented and discussed.
△ Less
Submitted 25 March, 2016;
originally announced March 2016.
-
Ratiometric Organic Fibers for Localized and Reversible Ion Sensing with Micrometer-Scale Spatial Resolution
Authors:
Loretta L. del Mercato,
Maria Moffa,
Rosaria Rinaldi,
Dario Pisignano
Abstract:
A fundamental issue in biomedical and environmental sciences is the development of sensitive and robust sensors able to probe the analyte of interest, under physiological and pathological conditions or in environmental samples, and with very high spatial resolution. In this work, novel hybrid organic fibers that can effectively report the analyte concentration within the local microenvironment are…
▽ More
A fundamental issue in biomedical and environmental sciences is the development of sensitive and robust sensors able to probe the analyte of interest, under physiological and pathological conditions or in environmental samples, and with very high spatial resolution. In this work, novel hybrid organic fibers that can effectively report the analyte concentration within the local microenvironment are reported. The nanostructured and flexible wires are prepared by embedding fluorescent pH sensors based on seminaphtho-rhodafluor-1-dextran conjugate. By adjusting capsule/polymer ratio and spinning conditions, the diameter of the fibers and the alignment of the reporting capsules are both tuned. The hybrid wires display excellent stability, high sensitivity, as well as reversible response, and their operation relies on effective diffusional kinetic coupling of the sensing regions and the embedding polymer matrix. These devices are believed to be a powerful new sensing platform for clinical diagnostics, bioassays and environmental monitoring.
△ Less
Submitted 8 November, 2015;
originally announced November 2015.
-
Controlled atmosphere electrospinning of organic nanofibers with improved light emission and waveguiding properties
Authors:
Vito Fasano,
Maria Moffa,
Andrea Camposeo,
Luana Persano,
Dario Pisignano
Abstract:
Electrospinning in controlled nitrogen atmosphere is developed for the realization of active polymer nanofibers. Fibers electrospun under controlled atmospheric conditions are found to be smoother and more uniform than samples realized by conventional electrospinning processes performed in air. In addition, they exhibit peculiar composition, incorporating a greatly reduced oxygen content during ma…
▽ More
Electrospinning in controlled nitrogen atmosphere is developed for the realization of active polymer nanofibers. Fibers electrospun under controlled atmospheric conditions are found to be smoother and more uniform than samples realized by conventional electrospinning processes performed in air. In addition, they exhibit peculiar composition, incorporating a greatly reduced oxygen content during manufacturing, which favors enhanced optical properties and increases emission quantum yield. Active waveguides with optical losses coefficients lowered by ten times with respect to fibers spun in air are demonstrated through this method. These findings make the process very promising for the highly-controlled production of active polymer nanostructures for photonics, electronics and sensing.
△ Less
Submitted 16 November, 2015; v1 submitted 20 October, 2015;
originally announced October 2015.
-
Multifunctional polymer nanofibers: UV emission, optical gain, anisotropic wetting and high hydrophobicity for next flexible excitation sources
Authors:
Giovanni Morello,
Rita Manco,
Maria Moffa,
Luana Persano,
Andrea Camposeo,
Dario Pisignano
Abstract:
The use of UV light sources is highly relevant in many fields of science, being directly related to all those detection and diagnosis procedures which are based on fluorescence spectroscopy. Depending on the specific application, UV light-emitting materials are desired to feature a number of opto-mechanical properties, including brightness, optical gain for being used in laser devices, flexibility…
▽ More
The use of UV light sources is highly relevant in many fields of science, being directly related to all those detection and diagnosis procedures which are based on fluorescence spectroscopy. Depending on the specific application, UV light-emitting materials are desired to feature a number of opto-mechanical properties, including brightness, optical gain for being used in laser devices, flexibility to conform with different lab-on-chip architectures, and tailorable wettability to control and minimize their interaction with ambient humidity and fluids. In this work, we introduce multifunctional, UV-emitting electrospun fibers with both optical gain and anisotropic hydrophobicity greatly enhanced compared to films. Fibers are described by the onset of a composite wetting state and their arrangement in uniaxial arrays further favours liquid directional control. The low gain threshold and optical losses, the plastic nature and the flexibility and stability of these UV-emitting fibers make them interesting for building light-emitting devices and microlasers. Furthermore, the found anisotropic hydrophobicity is strongly synergic with optical properties, reducing interfacial interactions with liquids and enabling smart functional surfaces for droplet microfluidic and wearable applications.
△ Less
Submitted 16 November, 2015; v1 submitted 24 September, 2015;
originally announced September 2015.
-
Surface-enhanced Raman spectroscopy in 3D electrospun nanofiber mats coated with gold nanorods
Authors:
A. Camposeo,
D. Spadaro,
D. Magrì,
M. Moffa,
P. G. Gucciardi,
L. Persano,
O. M. Maragò,
D. Pisignano
Abstract:
Nanofibers functionalized by metal nanostructures and particles are exploited as effective flexible substrates for SERS analysis. Their complex three-dimensional structure may provide Raman signals enhanced by orders of magnitude compared to untextured surfaces. Understanding the origin of such improved performances is therefore very important for pushing nanofiber-based analytical technologies to…
▽ More
Nanofibers functionalized by metal nanostructures and particles are exploited as effective flexible substrates for SERS analysis. Their complex three-dimensional structure may provide Raman signals enhanced by orders of magnitude compared to untextured surfaces. Understanding the origin of such improved performances is therefore very important for pushing nanofiber-based analytical technologies to their upper limit. Here we report on polymer nanofiber mats which can be exploited as substrates for enhancing the Raman spectra of adsorbed probe molecules. The increased surface area and the scattering of light in the nanofibrous system are individually analyzed as mechanisms to enhance Raman scattering. The deposition of gold nanorods on the fibers further amplifies Raman signals due to SERS. This study suggests that Raman signals can be finely tuned in intensity and effectively enhanced in nanofiber mats and arrays by properly tailoring the architecture, composition, and light-scattering properties of the complex networks of filaments.
△ Less
Submitted 15 March, 2016; v1 submitted 27 July, 2015;
originally announced July 2015.
-
Sub-ms dynamics of the instability onset of electrospinning
Authors:
Martina Montinaro,
Vito Fasano,
Maria Moffa,
Andrea Camposeo,
Luana Persano,
Marco Lauricella,
Sauro Succi,
Dario Pisignano
Abstract:
Electrospun polymer jets are imaged for the first time at an ultra-high rate of 10,000 frames per second, investigating the process dynamics, and the instability propagation velocity and displacement in space. The polymer concentration, applied voltage bias and needle-collector distance are systematically varied, and their influence on the instability propagation velocity and on the jet angular fl…
▽ More
Electrospun polymer jets are imaged for the first time at an ultra-high rate of 10,000 frames per second, investigating the process dynamics, and the instability propagation velocity and displacement in space. The polymer concentration, applied voltage bias and needle-collector distance are systematically varied, and their influence on the instability propagation velocity and on the jet angular fluctuations analyzed. This allows us to unveil the instability formation and cycling behavior, and its exponential growth at the onset, exhibiting radial growth rates of the order of 10^3 s^-1. Allowing the conformation and evolution of polymeric solutions to be studied in depth, high-speed imaging at sub-ms scale shows a significant potential for improving the fundamental knowledge of electrified jets, leading to obtain finely controllable bending and solution stretching in electrospinning, and consequently better designed nanofibers morphologies and structures.
△ Less
Submitted 1 May, 2015; v1 submitted 10 April, 2015;
originally announced April 2015.
-
Electrospun amplified fiber optics
Authors:
Giovanni Morello,
Andrea Camposeo,
Maria Moffa,
Dario Pisignano
Abstract:
A lot of research is focused on all-optical signal processing, aiming to obtain effective alternatives to existing data transmission platforms. Amplification of light in fiber optics, such as in Erbium-doped fiber amplifiers, is especially important for an efficient signal transmission. However, the complex fabrication methods, involving high-temperature processes performed in highly pure environm…
▽ More
A lot of research is focused on all-optical signal processing, aiming to obtain effective alternatives to existing data transmission platforms. Amplification of light in fiber optics, such as in Erbium-doped fiber amplifiers, is especially important for an efficient signal transmission. However, the complex fabrication methods, involving high-temperature processes performed in highly pure environment, slow down the fabrication and make amplified components expensive with respect to an ideal, high-throughput and room temperature production. Here, we report on near infrared polymer fiber amplifiers, working over a band of about 20 nm. The fibers are cheap, spun with a process entirely carried out at room temperature, and show amplified spontaneous emission with good gain coefficients as well as low optical losses (a few cm^-1). The amplification process is favoured by the high fiber quality and low self-absorption. The found performance metrics promise to be suitable for short-distance operation, and the large variety of commercially-available doping dyes might allow for effective multi-wavelength operation by electrospun amplified fiber optics.
△ Less
Submitted 6 April, 2015; v1 submitted 25 February, 2015;
originally announced February 2015.
-
Organic nanofibers embedding stimuli-responsive threaded molecular components
Authors:
Vito Fasano,
Massimo Baroncini,
Maria Moffa,
Donata Iandolo,
Andrea Camposeo,
Alberto Credi,
Dario Pisignano
Abstract:
While most of the studies on molecular machines have been performed in solution, interfacing these supramolecular systems with solid-state nanostructures and materials is very important in view of their utilization in sensing components working by chemical and photonic actuation. Host polymeric materials, and particularly polymer nanofibers, enable the manipulation of the functional molecules cons…
▽ More
While most of the studies on molecular machines have been performed in solution, interfacing these supramolecular systems with solid-state nanostructures and materials is very important in view of their utilization in sensing components working by chemical and photonic actuation. Host polymeric materials, and particularly polymer nanofibers, enable the manipulation of the functional molecules constituting molecular machines, and provide a way to induce and control the supramolecular organization. Here, we present electrospun nanocomposites embedding a self-assembling rotaxane-type system that is responsive to both optical (UV-visible light) and chemical (acid/base) stimuli. The system includes a molecular axle comprised of a dibenzylammonium recognition site and two azobenzene end groups, and a dibenzo[24]crown-8 molecular ring. The dethreading and rethreading of the molecular components in nanofibers induced by exposure to base and acid vapors, as well as the photoisomerization of the azobenzene end groups, occur in a similar manner to what observed in solution. Importantly, however, the nanoscale mechanical function following external chemical stimuli induces a measurable variation of the macroscopic mechanical properties of nanofibers aligned in arrays, whose Young's modulus is significantly enhanced upon dethreading of the axles from the rings. These composite nanosystems show therefore great potential for application in chemical sensors, photonic actuators and environmentally responsive materials.
△ Less
Submitted 15 October, 2014; v1 submitted 8 October, 2014;
originally announced October 2014.
-
The conformational evolution of elongated polymer solutions tailors the polarization of light-emission from organic nanofibers
Authors:
Andrea Camposeo,
Israel Greenfeld,
Francesco Tantussi,
Maria Moffa,
Francesco Fuso,
Maria Allegrini,
Eyal Zussman,
Dario Pisignano
Abstract:
Polymer fibers are currently exploited in tremendously important technologies. Their innovative properties are mainly determined by the behavior of the polymer macromolecules under the elongation induced by external mechanical or electrostatic forces, characterizing the fiber drawing process. Although enhanced physical properties were observed in polymer fibers produced under strong stretching con…
▽ More
Polymer fibers are currently exploited in tremendously important technologies. Their innovative properties are mainly determined by the behavior of the polymer macromolecules under the elongation induced by external mechanical or electrostatic forces, characterizing the fiber drawing process. Although enhanced physical properties were observed in polymer fibers produced under strong stretching conditions, studies of the process-induced nanoscale organization of the polymer molecules are not available, and most of fiber properties are still obtained on an empirical basis. Here we reveal the orientational properties of semiflexible polymers in electrospun nanofibers, which allow the polarization properties of active fibers to be finely controlled. Modeling and simulations of the conformational evolution of the polymer chains during electrostatic elongation of semidilute solutions demonstrate that the molecules stretch almost fully within less than 1 mm from jet start, increasing polymer axial orientation at the jet center. The nanoscale mapping of the local dichroism of individual fibers by polarized near-field optical microscopy unveils for the first time the presence of an internal spatial variation of the molecular order, namely the presence of a core with axially aligned molecules and a sheath with almost radially oriented molecules. These results allow important and specific fiber properties to be manipulated and tailored, as here demonstrated for the polarization of emitted light.
△ Less
Submitted 30 July, 2014; v1 submitted 14 July, 2014;
originally announced July 2014.
-
Local mechanical properties of electrospun fibers correlate to their internal nanostructure
Authors:
Andrea Camposeo,
Israel Greenfeld,
Francesco Tantussi,
Stefano Pagliara,
Maria Moffa,
Francesco Fuso,
Maria Allegrini,
Eyal Zussman,
Dario Pisignano
Abstract:
The properties of polymeric nanofibers can be tailored and enhanced by properly managing the structure of the polymeric molecules at the nanoscale. Although electrospun polymer fibers are increasingly exploited in many technological applications, their internal nanostructure, determining their improved physical properties, is still poorly investigated and understood. Here, we unravel the internal…
▽ More
The properties of polymeric nanofibers can be tailored and enhanced by properly managing the structure of the polymeric molecules at the nanoscale. Although electrospun polymer fibers are increasingly exploited in many technological applications, their internal nanostructure, determining their improved physical properties, is still poorly investigated and understood. Here, we unravel the internal structure of electrospun functional nanofibers made by prototype conjugated polymers. The unique features of near field optical measurements are exploited to investigate the nanoscale spatial variation of the polymer density, evidencing the presence of a dense internal core embedded in a less dense polymeric shell. Interestingly, nanoscale mapping the fiber Young's modulus demonstrates that the dense core is stiffer than the polymeric, less dense shell. These findings are rationalized by developing a theoretical modeling and simulations of the polymer molecular structural evolution during the electrospinning process. This model predicts that the stretching of the polymer network induces a contraction towards the jet center of the network with a local increase of the polymer density, as observed in the solid structure. The found complex internal structure opens interesting perspective for improving and tailoring the molecular morphology and multifunctional electronic and optical properties of polymer fibers.
△ Less
Submitted 14 November, 2013; v1 submitted 5 October, 2013;
originally announced October 2013.
-
Bright light emission and waveguiding in conjugated polymer nanofibers electrospun from organic-salt added solutions
Authors:
Vito Fasano,
Alessandro Polini,
Giovanni Morello,
Maria Moffa,
Andrea Camposeo,
Dario Pisignano
Abstract:
Light emitting electrospun nanofibers of poly-[(9,9-dioctylfluorenyl-2,7-diyl)-co-(N,N'-diphenyl)-N,N'-di(p-butyl-oxy-phenyl)-1,4-diaminobenzene)] (PFO-PBAB) are produced by electrospinning under different experimental conditions. In particular, uniform fibers with average diameter of 180 nm are obtained by adding an organic salt to the electrospinning solution. The spectroscopic investigation ass…
▽ More
Light emitting electrospun nanofibers of poly-[(9,9-dioctylfluorenyl-2,7-diyl)-co-(N,N'-diphenyl)-N,N'-di(p-butyl-oxy-phenyl)-1,4-diaminobenzene)] (PFO-PBAB) are produced by electrospinning under different experimental conditions. In particular, uniform fibers with average diameter of 180 nm are obtained by adding an organic salt to the electrospinning solution. The spectroscopic investigation assesses that the presence of the organic salt does not alter the optical properties of the active material, therefore providing an alternative approach for the fabrication of highly emissive conjugated polymer nanofibers. The produced nanofibers display self-waveguiding of light, and polarized photoluminescence, which is especially promising for embedding active electrospun fibers in sensing and nanophotonic devices.
△ Less
Submitted 3 September, 2013; v1 submitted 1 August, 2013;
originally announced August 2013.
