-
Factors determining surface oxygen vacancy formation energy in ternary spinel structure oxides with zinc
Authors:
Yoyo Hinuma,
Shinya Mine,
Takashi Toyao,
Takashi Kamachi,
Ken-ichi Shimizu
Abstract:
Spinel oxides are an important class of materials for heterogeneous catalysis including photocatalysis and electrocatalysis. The surface O vacancy formation energy (EOvac) is a critical quantity on catalyst performance because the surface of metal oxide catalysts often acts as reaction sites, for example, in the Mars-van Krevelen mechanism. However, experimental evaluation of EOvac is very challen…
▽ More
Spinel oxides are an important class of materials for heterogeneous catalysis including photocatalysis and electrocatalysis. The surface O vacancy formation energy (EOvac) is a critical quantity on catalyst performance because the surface of metal oxide catalysts often acts as reaction sites, for example, in the Mars-van Krevelen mechanism. However, experimental evaluation of EOvac is very challenging. We obtained the EOvac for (100), (110), and (111) surfaces of normal zinc-based spinel oxides ZnAl2O4, ZnGa2O4, ZnIn2O4, ZnV2O4, ZnCr2O4, ZnMn2O4, ZnFe2O4, and ZnCo2O4. The most stable surface is (100) for all compounds. The smallest EOvac for a surface is the largest in the (100) surface except for ZnCo2O4. For (100) and (110) surfaces, there is a good correlation, over all spinels, between the smallest EOvac for the surface and bulk formation energy, while the ionization potential correlates well in (111) surfaces. Machine learning over EOvac of all surface sites in all orientations and all compounds to find the important factors, or descriptors, that decide the EOvac revealed that bulk and surface-dependent descriptors are the most important, namely the bulk formation energy, a Boolean descriptor on whether the surface is (111), and the ionization potential, followed by geometrical descriptors that are different in each O site.
△ Less
Submitted 30 April, 2023;
originally announced May 2023.
-
Surface activation by electron scavenger metal nanorod adsorption on TiH2, TiC, TiN, and Ti2O3
Authors:
Yoyo Hinuma,
Shinya Mine,
Takashi Toyao,
Zen Maeno,
Ken-ichi Shimizu
Abstract:
Metal/oxide support perimeter sites are known to provide unique properties because the nearby metal changes the local environment on the support surface. In particular, the electron scavenger effect reduces the energy necessary for surface anion desorption, thereby contributes to activation of the (reverse) Mars-van Krevelen mechanism. This study investigated the possibility of such activation in…
▽ More
Metal/oxide support perimeter sites are known to provide unique properties because the nearby metal changes the local environment on the support surface. In particular, the electron scavenger effect reduces the energy necessary for surface anion desorption, thereby contributes to activation of the (reverse) Mars-van Krevelen mechanism. This study investigated the possibility of such activation in hydrides, carbides, nitrides, and sulfides. The work functions (WFs) of known hydrides, carbides, nitrides, oxides, and sulfides with group 3, 4, or 5 cations (Sc, Y, La, Ti, Zr, Hf, V, Nb, and Ta) were calculated. The WFs of most hydrides, carbides, and nitrides are smaller than the WF of Ag, implying that the electron scavenger effect may occur when late transition metal nanoparticles are adsorbed on the surface. The WF of oxides and sulfides decrease when reduced. The surface anion vacancy formation energy correlates well with the bulk formation energy in carbides and nitrides, while almost no correlation is found in hydrides because of the small range of surface hydrogen vacancy formation energy values. The electron scavenger effect is explicitly observed in nanorods adsorbed on TiH2 and Ti2O3; the surface vacancy formation energy decreases at anion sites near the nanorod, and charge transfer to the nanorod happens when an anion is removed at such sites. Activation of hydrides, carbides, and nitrides by nanorod adsorption and screening support materials through WF calculation are expected to open up a new category of supported catalysts.
△ Less
Submitted 30 April, 2023;
originally announced May 2023.
-
Comparison of Matlantis and VASP bulk formation and surface energies in metal hydrides, carbides, nitrides, oxides, and sulfides
Authors:
Shinya Mine,
Takashi Toyao,
Ken-ichi Shimizu,
Yoyo Hinuma
Abstract:
Generic neural network potentials without forcing users to train potentials could result in significantly acceleration of total energy calculations. Takamoto et al. [Nat. Commun. (2022), 13, 2991] developed such a deep neural network potential (NNP) and made it available in their Matlantis package. We compared the Matlantis bulk formation, surface, and surface O vacancy formation energies of metal…
▽ More
Generic neural network potentials without forcing users to train potentials could result in significantly acceleration of total energy calculations. Takamoto et al. [Nat. Commun. (2022), 13, 2991] developed such a deep neural network potential (NNP) and made it available in their Matlantis package. We compared the Matlantis bulk formation, surface, and surface O vacancy formation energies of metal hydrides, carbides, nitrides, oxides, and sulfides with our previously calculated VASP values obtained from first-principles with the PBEsol(+U) functional. Matlantis bulk formation energies were consistently ~0.1 eV/atom larger and the surface energies were typically ~10 meV/Å^2 smaller than the VASP counterpart. Surface O vacancy formation energies were generally underestimated within ~0.8 eV. These results suggest that Matlantis energies could serve as a relatively good descriptor of the VASP bulk formation and surface energies.
△ Less
Submitted 21 April, 2023;
originally announced April 2023.
-
Stabilization of layered perovskite structures via strontium substitution in Ca$_3$Ti$_2$O$_7$ revealed via elemental mapping
Authors:
Kosuke Kurushima,
Hiroshi Nakajima,
Shinya Mine,
Hirofumi Tsukasaki,
Masaya Matsuoka,
Bin Gao,
Sang-Wook Cheong,
Shigeo Mori
Abstract:
Extensive studies have been performed on layered compounds, ranging from layered cuprates to van der Waals materials with critical issues of intergrowths and stacking faults. However, such structures have been studied less because of experimental difficulty. We present characteristic defect structures of intergrowths in the Ruddlesden-Popper Ca$_{2.46}$Sr$_{0.54}$Ti$_2$O$_7$, which is known to exh…
▽ More
Extensive studies have been performed on layered compounds, ranging from layered cuprates to van der Waals materials with critical issues of intergrowths and stacking faults. However, such structures have been studied less because of experimental difficulty. We present characteristic defect structures of intergrowths in the Ruddlesden-Popper Ca$_{2.46}$Sr$_{0.54}$Ti$_2$O$_7$, which is known to exhibit hybrid improper ferroelectricity. Transmission electron microscopy reveals that numerous intergrowths composed of 7 and 15 layers are introduced in the ferroelectric domains. Elemental maps demonstrate that Sr ions are selectively substituted into the perovskite layers of intergrowths. Density functional theory calculations support the site-selective substitution of Sr ions, favorably located in the intergrowths. The stabilization of the Ruddlesden-Popper phase and intergrowths via Sr substitution can be explained by the ionic-radius difference between Ca and Sr ions. The study reveals detailed defect structures originating from the layered perovskite structure of Ca$_{2.46}$Sr$_{0.54}$Ti$_2$O$_7$, and shows the usefulness of elemental mapping in probing the substitution effects in oxides.
△ Less
Submitted 11 January, 2022;
originally announced January 2022.
-
Charged domain boundaries stabilized by translational symmetry breaking in the hybrid improper ferroelectric Ca$_{3-x}$Sr$_x$Ti$_2$O$_7$
Authors:
Hiroshi Nakajima,
Kosuke Kurushima,
Shinya Mine,
Hirofumi Tsukasaki,
Masaya Matsuoka,
Bin Gao,
Sang-Wook Cheong,
Shigeo Mori
Abstract:
Charged domain walls and boundaries in ferroelectric materials display distinct phenomena, such as an increased conductivity due to the accumulation of bound charges. Here, we report the electron microscopy observations of atomic-scale arrangements at charged domain boundaries in the hybrid improper ferroelectric Ca$_{2.46}$Sr$_{0.54}$Ti$_2$O$_7$. Like in the prototype improper ferroelectric YMnO…
▽ More
Charged domain walls and boundaries in ferroelectric materials display distinct phenomena, such as an increased conductivity due to the accumulation of bound charges. Here, we report the electron microscopy observations of atomic-scale arrangements at charged domain boundaries in the hybrid improper ferroelectric Ca$_{2.46}$Sr$_{0.54}$Ti$_2$O$_7$. Like in the prototype improper ferroelectric YMnO$_3$, we find that charged domain boundaries in Ca$_{2.46}$Sr$_{0.54}$Ti$_2$O$_7$ correspond to out-of-phase boundaries, which separate adjacent domains with a fractional translational shift of the unit cell. In addition, our results show that strontium ions are located at charged domain boundaries. The out-of-phase boundary structure may decrease the polarization charge at the boundary because of the ferrielectric nature of Ca$_{2.46}$Sr$_{0.54}$Ti$_2$O$_7$, thereby promoting the stabilization of the charged state. By combining atomic-resolution imaging and density-functional theory calculations, this study proposes an unexplored stabilization mechanism of charged domain boundaries and structural defects accompanying out-of-phase translational shifts.
△ Less
Submitted 15 October, 2021;
originally announced October 2021.
