-
Digital quantum magnetism at the frontier of classical simulations
Authors:
Reza Haghshenas,
Eli Chertkov,
Michael Mills,
Wilhelm Kadow,
Sheng-Hsuan Lin,
Yi-Hsiang Chen,
Chris Cade,
Ido Niesen,
Tomislav Begušić,
Manuel S. Rudolph,
Cristina Cirstoiu,
Kevin Hemery,
Conor Mc Keever,
Michael Lubasch,
Etienne Granet,
Charles H. Baldwin,
John P. Bartolotta,
Matthew Bohn,
Julia Cline,
Matthew DeCross,
Joan M. Dreiling,
Cameron Foltz,
David Francois,
John P. Gaebler,
Christopher N. Gilbreth
, et al. (31 additional authors not shown)
Abstract:
The utility of near-term quantum computers for simulating realistic quantum systems hinges on the stability of digital quantum matter--realized when discrete quantum gates approximate continuous time evolution--and whether it can be maintained at system sizes and time scales inaccessible to classical simulations. Here, we use Quantinuum's H2 quantum computer to simulate digitized dynamics of the q…
▽ More
The utility of near-term quantum computers for simulating realistic quantum systems hinges on the stability of digital quantum matter--realized when discrete quantum gates approximate continuous time evolution--and whether it can be maintained at system sizes and time scales inaccessible to classical simulations. Here, we use Quantinuum's H2 quantum computer to simulate digitized dynamics of the quantum Ising model and observe the emergence of Floquet prethermalization on timescales where accurate simulations using current classical methods are extremely challenging (if feasible at all). In addition to confirming the stability of dynamics subject to achievable digitization errors, we show direct evidence of the resultant local equilibration by computing diffusion constants associated with an emergent hydrodynamic description of the dynamics. Our results were enabled by continued advances in two-qubit gate quality (native partial entangler fidelities of 99.94(1)%) that allow us to access circuit volumes of over 2000 two-qubit gates. This work establishes digital quantum computers as powerful tools for studying continuous-time dynamics and demonstrates their potential to benchmark classical heuristics in a regime of scale and complexity where no known classical methods are both efficient and trustworthy.
△ Less
Submitted 11 April, 2025; v1 submitted 26 March, 2025;
originally announced March 2025.
-
Qutrit Toric Code and Parafermions in Trapped Ions
Authors:
Mohsin Iqbal,
Anasuya Lyons,
Chiu Fan Bowen Lo,
Nathanan Tantivasadakarn,
Joan Dreiling,
Cameron Foltz,
Thomas M. Gatterman,
Dan Gresh,
Nathan Hewitt,
Craig A. Holliman,
Jacob Johansen,
Brian Neyenhuis,
Yohei Matsuoka,
Michael Mills,
Steven A. Moses,
Peter Siegfried,
Ashvin Vishwanath,
Ruben Verresen,
Henrik Dreyer
Abstract:
The development of programmable quantum devices can be measured by the complexity of manybody states that they are able to prepare. Among the most significant are topologically ordered states of matter, which enable robust quantum information storage and processing. While topological orders are more readily accessible with qudits, experimental realisations have thus far been limited to lattice mod…
▽ More
The development of programmable quantum devices can be measured by the complexity of manybody states that they are able to prepare. Among the most significant are topologically ordered states of matter, which enable robust quantum information storage and processing. While topological orders are more readily accessible with qudits, experimental realisations have thus far been limited to lattice models of qubits. Here, we prepare a ground state of the Z3 toric code state on 24 qutrits in a trapped ion quantum processor with fidelity per qutrit exceeding 96.5(3)%. We manipulate two types of defects which go beyond the conventional qubit toric code: a parafermion, and its bound state which is related to charge conjugation symmetry. We further demonstrate defect fusion and the transfer of entanglement between anyons and defects, which we use to control topological qutrits. Our work opens up the space of long-range entangled states with qudit degrees of freedom for use in quantum simulation and universal error-correcting codes.
△ Less
Submitted 6 November, 2024;
originally announced November 2024.
-
Experimental Demonstration of Break-Even for the Compact Fermionic Encoding
Authors:
Ramil Nigmatullin,
Kevin Hemery,
Khaldoon Ghanem,
Steven Moses,
Dan Gresh,
Peter Siegfried,
Michael Mills,
Thomas Gatterman,
Nathan Hewitt,
Etienne Granet,
Henrik Dreyer
Abstract:
The utility of solving the Fermi-Hubbard model has been estimated in the billions of dollars. Digital quantum computers can in principle address this task, but have so far been limited to quasi one-dimensional models. This is because of exponential overheads caused by the interplay of noise and the non-locality of the mapping between fermions and qubits. Here, we show experimentally that a recentl…
▽ More
The utility of solving the Fermi-Hubbard model has been estimated in the billions of dollars. Digital quantum computers can in principle address this task, but have so far been limited to quasi one-dimensional models. This is because of exponential overheads caused by the interplay of noise and the non-locality of the mapping between fermions and qubits. Here, we show experimentally that a recently developed local encoding can overcome this problem. We develop a new compilation scheme, called "corner hopping", that reduces the cost of simulating fermionic hopping by 42% which allows us to conduct the largest digital quantum simulations of a fermionic model to date, using a trapped ion quantum computer to prepare adiabatically the ground state of a 6 x 6 spinless Fermi-Hubbard model encoded in 48 physical qubits. We also develop two new error mitigation schemes for systems with conserved quantities, one based on local postselection and one on extrapolation of local observables. Our results suggest that Fermi-Hubbard models beyond classical simulability can be addressed by digital quantum computers without large increases in gate fidelity.
△ Less
Submitted 10 September, 2024;
originally announced September 2024.
-
Evidence of Scaling Advantage for the Quantum Approximate Optimization Algorithm on a Classically Intractable Problem
Authors:
Ruslan Shaydulin,
Changhao Li,
Shouvanik Chakrabarti,
Matthew DeCross,
Dylan Herman,
Niraj Kumar,
Jeffrey Larson,
Danylo Lykov,
Pierre Minssen,
Yue Sun,
Yuri Alexeev,
Joan M. Dreiling,
John P. Gaebler,
Thomas M. Gatterman,
Justin A. Gerber,
Kevin Gilmore,
Dan Gresh,
Nathan Hewitt,
Chandler V. Horst,
Shaohan Hu,
Jacob Johansen,
Mitchell Matheny,
Tanner Mengle,
Michael Mills,
Steven A. Moses
, et al. (4 additional authors not shown)
Abstract:
The quantum approximate optimization algorithm (QAOA) is a leading candidate algorithm for solving optimization problems on quantum computers. However, the potential of QAOA to tackle classically intractable problems remains unclear. Here, we perform an extensive numerical investigation of QAOA on the low autocorrelation binary sequences (LABS) problem, which is classically intractable even for mo…
▽ More
The quantum approximate optimization algorithm (QAOA) is a leading candidate algorithm for solving optimization problems on quantum computers. However, the potential of QAOA to tackle classically intractable problems remains unclear. Here, we perform an extensive numerical investigation of QAOA on the low autocorrelation binary sequences (LABS) problem, which is classically intractable even for moderately sized instances. We perform noiseless simulations with up to 40 qubits and observe that the runtime of QAOA with fixed parameters scales better than branch-and-bound solvers, which are the state-of-the-art exact solvers for LABS. The combination of QAOA with quantum minimum finding gives the best empirical scaling of any algorithm for the LABS problem. We demonstrate experimental progress in executing QAOA for the LABS problem using an algorithm-specific error detection scheme on Quantinuum trapped-ion processors. Our results provide evidence for the utility of QAOA as an algorithmic component that enables quantum speedups.
△ Less
Submitted 2 June, 2024; v1 submitted 4 August, 2023;
originally announced August 2023.
-
Non-Abelian Topological Order and Anyons on a Trapped-Ion Processor
Authors:
Mohsin Iqbal,
Nathanan Tantivasadakarn,
Ruben Verresen,
Sara L. Campbell,
Joan M. Dreiling,
Caroline Figgatt,
John P. Gaebler,
Jacob Johansen,
Michael Mills,
Steven A. Moses,
Juan M. Pino,
Anthony Ransford,
Mary Rowe,
Peter Siegfried,
Russell P. Stutz,
Michael Foss-Feig,
Ashvin Vishwanath,
Henrik Dreyer
Abstract:
Non-Abelian topological order (TO) is a coveted state of matter with remarkable properties, including quasiparticles that can remember the sequence in which they are exchanged. These anyonic excitations are promising building blocks of fault-tolerant quantum computers. However, despite extensive efforts, non-Abelian TO and its excitations have remained elusive, unlike the simpler quasiparticles or…
▽ More
Non-Abelian topological order (TO) is a coveted state of matter with remarkable properties, including quasiparticles that can remember the sequence in which they are exchanged. These anyonic excitations are promising building blocks of fault-tolerant quantum computers. However, despite extensive efforts, non-Abelian TO and its excitations have remained elusive, unlike the simpler quasiparticles or defects in Abelian TO. In this work, we present the first unambiguous realization of non-Abelian TO and demonstrate control of its anyons. Using an adaptive circuit on Quantinuum's H2 trapped-ion quantum processor, we create the ground state wavefunction of $D_4$ TO on a kagome lattice of 27 qubits, with fidelity per site exceeding $98.4\%$. By creating and moving anyons along Borromean rings in spacetime, anyon interferometry detects an intrinsically non-Abelian braiding process. Furthermore, tunneling non-Abelions around a torus creates all 22 ground states, as well as an excited state with a single anyon -- a peculiar feature of non-Abelian TO. This work illustrates the counterintuitive nature of non-Abelions and enables their study in quantum devices.
△ Less
Submitted 14 February, 2024; v1 submitted 5 May, 2023;
originally announced May 2023.
-
Muon-spin relaxation investigation of magnetic bistability in a crystalline organic radical compound
Authors:
Alberto Hernandez-Melian,
Benjamin M. Huddart,
Francis L. Pratt,
Stephen J. Blundell,
Michelle B. Mills,
Harrison K. S. Young,
Kathryn E. Preuss,
Tom Lancaster
Abstract:
We present the results of a muon-spin relaxation ($μ^{+}$SR) investigation of the crystalline organic radical compound 4-(2-benzimidazolyl)-1,2,3,5-dithiadiazolyl (HbimDTDA), in which we demonstrate the hysteretic magnetic switching of the system that takes place at $T = 274 \pm 11\,\mathrm{K}$ caused by a structural phase transition. Muon-site analysis using electronic structure calculations sugg…
▽ More
We present the results of a muon-spin relaxation ($μ^{+}$SR) investigation of the crystalline organic radical compound 4-(2-benzimidazolyl)-1,2,3,5-dithiadiazolyl (HbimDTDA), in which we demonstrate the hysteretic magnetic switching of the system that takes place at $T = 274 \pm 11\,\mathrm{K}$ caused by a structural phase transition. Muon-site analysis using electronic structure calculations suggests a range of candidate muon stopping sites. The sites are numerous and similar in energy but, significantly, differ between the two structural phases of the material. Despite the difference in the sites, the muon remains a faithful probe of the transition, revealing a dynamically-fluctuating magnetically disordered state in the low-temperature structural phase. In contrast, in the high temperature phase the relaxation is caused by static nuclear moments, with rapid electronic dynamics being motionally narrowed from the muon spectra.
△ Less
Submitted 28 November, 2022;
originally announced November 2022.
-
Shearing Mechanisms of Co-Precipitates in IN718
Authors:
Christopher H. Zenk,
Longsheng Feng,
Donald McAllister,
Yunzhi Wang,
Michael J. Mills
Abstract:
The Ni-base superalloy 718 is the most widely used material for turbomachinery in the aerospace industry and land-based turbines. Although the relationship between processing and the resulting properties is well known, an understanding of the specific deformation mechanisms activated across its application temperature range is required to create more mechanistically accurate property models. Direc…
▽ More
The Ni-base superalloy 718 is the most widely used material for turbomachinery in the aerospace industry and land-based turbines. Although the relationship between processing and the resulting properties is well known, an understanding of the specific deformation mechanisms activated across its application temperature range is required to create more mechanistically accurate property models. Direct atomic-scale imaging observations with high angle annular dark-field scanning transmission electron microscopy, complemented by phase-field modeling informed by generalized stacking fault surface calculations using density functional theory, were employed to understand the shear process of $γ''$ and $γ'/γ''$ co-precipitates after 1 \% macroscopic strain at lower temperature (ambient and $427 °C$). Experimentally, intrinsic stacking faults were observed in the $γ''$, whereas the $γ'$ was found to exhibit anti-phase boundaries or superlattice intrinsic stacking faults. Additionally, the atomically flat $γ'/γ''$ interfaces in the co-precipitates were found to exhibit offsets after shearing, which can be used as tracers for the deformation events. Phase-field modeling shows that the developing fault-structure is dependent on the direction of the Burgers vector of the $a/2 \langle110\rangle$ matrix dislocation (or dislocation group) due to the lower crystal symmetry of the ${γ''}$ phase. The interplay between $γ'$ and $γ''$ phases results in unique deformation pathways of the co-precipitate and increases the shear resistance. Consistent with the experimental observations, the simulation results indicate that complex shearing mechanisms are active in the low-temperature deformation regime and that multiple $a/2 \langle110\rangle$ dislocations of non-parallel Burgers vectors may be active on the same slip plane.
△ Less
Submitted 29 July, 2021;
originally announced July 2021.
-
Localizing fractional quasiparticles on graphene quantum hall antidots
Authors:
Scott M. Mills,
Dmitri V. Averin,
Xu Du
Abstract:
We report localization of fractional quantum Hall (QH) quasiparticles on graphene antidots. By studying coherent tunneling through the localized QH edge modes on the antidot, we measured the QH quasiparticle charges to be approximately $\pm e/3$ at fractional fillings of $ν= \pm 1/3$. The Dirac spectrum in graphene allows large energy scales and robust quasiparticle localization against thermal ex…
▽ More
We report localization of fractional quantum Hall (QH) quasiparticles on graphene antidots. By studying coherent tunneling through the localized QH edge modes on the antidot, we measured the QH quasiparticle charges to be approximately $\pm e/3$ at fractional fillings of $ν= \pm 1/3$. The Dirac spectrum in graphene allows large energy scales and robust quasiparticle localization against thermal excitation. The capability of localizing fractional quasiparticles on QH antidots brings promising opportunities for realizing anyon braiding and novel quantum electronics.
△ Less
Submitted 21 October, 2020;
originally announced October 2020.
-
Heat treatment - microstructure - hardness relationships of new nickel-rich nickel-titanium-hafnium alloys developed for tribological applications
Authors:
Sean H. Mills,
Christopher Dellacorte,
Ronald D. Noebe,
Michael J. Mills,
Aaron P. Stebner,
Behnam Amin-Ahmadi
Abstract:
The effects of various heat treatments on the microstructure and hardness of new Ni56Ti41Hf3 and Ni56Ti36Hf8 (atomic %) alloys were studied to evaluate the suitability of these materials for tribological applications. A solid-solution strengthening effect due to Hf atoms was observed for the solution annealed (SA) Ni56Ti36Hf8 alloy (716 HV), resulting in a comparable hardness to the Ni56Ti41Hf3 al…
▽ More
The effects of various heat treatments on the microstructure and hardness of new Ni56Ti41Hf3 and Ni56Ti36Hf8 (atomic %) alloys were studied to evaluate the suitability of these materials for tribological applications. A solid-solution strengthening effect due to Hf atoms was observed for the solution annealed (SA) Ni56Ti36Hf8 alloy (716 HV), resulting in a comparable hardness to the Ni56Ti41Hf3 alloy containing 54 vol.% of Ni4Ti3 precipitates (707 HV). In the Ni56Ti41Hf3 alloy, the maximum hardness (752 HV), achieved after aging at 300C for 12 h, was attributed to dense, semi-coherent precipitation of the Ni4Ti3 phase. Unlike the lenticular morphology usually observed within binary NiTi alloys, a blocky Ni4Ti3 morphology formed within Ni56Ti36Hf3 due to a smaller lattice mismatch in the direction normal to the habit plane at the precipitate/matrix interface. The maximum hardness for Ni56Ti36Hf8 (769 HV) was obtained after applying an intermediate aging step (300C for 12 h) followed by normal aging (550C for 4 h). This two-step aging treatment induces dense nanoscale precipitation of two interspersed precipitate phases, namely H-phase and a new cubic Ni-rich precipitate phase, resulting in the highest hardness exhibited yet by this family alloys. The composition of cubic Ni-rich precipitates was measured using atom probe tomography to be approximately Ni61.5Ti31Hf7.5, while HAADF-STEM revealed a 54 atom motif cubic structure (a= 8.87 Angstroms), and electron diffraction showed that the structure belongs to the pm-3m (No. 221) space group.
△ Less
Submitted 16 September, 2020;
originally announced September 2020.
-
Knowledge of Process-Structure-Property Relationships to Engineer Better Heat Treatments for Laser Powder Bed Fusion Additive Manufactured Inconel 718
Authors:
Thomas G. Gallmeyer,
Senthamilaruvi Moorthy,
Branden B. Kappes,
Michael J. Mills,
Aaron P. Stebner,
Behnam Aminahmadi
Abstract:
Dislocation structures, chemical segregation, {γ^{\prime}, {γ^{\prime \prime}}, δ precipitates and Laves phase were quantified within the microstructures of Inconel 718 (IN718) produced by laser powder bed fusion additive manufacturing (AM) and subjected to standard, direct aging, and modified multi-step heat treatments. Additionally, heat-treated samples still attached to the build plates vs. tho…
▽ More
Dislocation structures, chemical segregation, {γ^{\prime}, {γ^{\prime \prime}}, δ precipitates and Laves phase were quantified within the microstructures of Inconel 718 (IN718) produced by laser powder bed fusion additive manufacturing (AM) and subjected to standard, direct aging, and modified multi-step heat treatments. Additionally, heat-treated samples still attached to the build plates vs. those removed were also documented for a standard heat treatment. The effects of the different resulting microstructures on room temperature strengths and elongations to failure is revealed. Knowledge derived from these process structure property relationships was used to engineer a super solvus solution anneal at 1020 degC for 15 minutes, followed by aging at 720 degC for 24 hours heat treatment for AM-IN718 that eliminates Laves and δ phases, preserves AM specific dislocation cells that are shown to be stabilized by MC carbide particles, and precipitates dense {γ^{\prime} and {γ^{\prime \prime}} nanoparticle populations. This 'optimized for AM-IN718 heat treatment' results in superior properties relative to wrought/additively manufactured, then industry standard heat treated IN718: relative increases of 7/10 percent in yield strength, 2/7 percent in ultimate strength, and 23/57 percent in elongation to failure are realized, respectively, regardless of as-built vs. machined surface finishes.
△ Less
Submitted 24 October, 2019; v1 submitted 26 September, 2019;
originally announced September 2019.
-
Probing magnetic order and disorder in the one-dimensional molecular spin chains CuF2(pyz) and [Ln(hfac)3(boaDTDA)]n (Ln=Sm, La) using implanted muons
Authors:
T. Lancaster,
B. M. Huddart,
R. C. Williams,
F. Xiao,
K. J. A. Franke,
P. J. Baker,
F. L. Pratt,
S. J. Blundell,
J. A. Schlueter,
M. B. Mills,
A. C. Maahs,
K. E. Preuss
Abstract:
We present the results of muon-spin relaxation ($μ^{+}$SR) measurements on antiferromagnetic and ferromagnetic spin chains. In antiferromagnetic CuF$_{2}$(pyz) we identify a transition to long range magnetic order taking place at $T_{\mathrm{N}} = 0.6(1)$ K, allowing us to estimate a ratio with the intrachain exchange of $T_{\mathrm{N}}/|J| \approx 0.1$ and the ratio of interchain to intrachain ex…
▽ More
We present the results of muon-spin relaxation ($μ^{+}$SR) measurements on antiferromagnetic and ferromagnetic spin chains. In antiferromagnetic CuF$_{2}$(pyz) we identify a transition to long range magnetic order taking place at $T_{\mathrm{N}} = 0.6(1)$ K, allowing us to estimate a ratio with the intrachain exchange of $T_{\mathrm{N}}/|J| \approx 0.1$ and the ratio of interchain to intrachain exchange coupling as $|J'/J| \approx 0.05$. The ferromagnetic chain [Sm(hfac)$_{3}$(boaDTDA)]$_{n}$ undergoes an ordering transition at $T_{\mathrm{c}}=2.8(1)$ K, seen via a broad freezing of dynamic fluctuations on the muon (microsecond) timescale and implying $T_{\mathrm{c}}/|J| \approx 0.6$. The ordered radical moment continues to fluctuate on this timescale down to 0.3 K, while the Sm moments remain disordered. In contrast, the radical spins in [La(hfac)$_{3}$(boaDTDA)]$_{n}$ remain magnetically disordered down to $T=0.1$ K suggesting $T_{\mathrm{c}}/|J| < 0.17$.
△ Less
Submitted 13 May, 2019;
originally announced May 2019.
-
Three-dimensional in situ characterization of phase transformation induced austenite grain refinement in nickel-titanium
Authors:
Ashley N. Bucsek,
Lee Casalena,
Darren C. Pagan,
Partha P. Paul,
Yuriy Chumlyakov,
Michael J. Mills,
Aaron P. Stebner
Abstract:
Near-field and far-field high-energy diffraction microscopy and microcomputed tomography X-ray techniques were used to study a bulk single crystal nickel-titanium shape memory alloy sample subjected to thermal cycling under a constant applied load. Three-dimensional in situ reconstructions of the austenite microstructure are presented, including the structure and distribution of emergent grain bou…
▽ More
Near-field and far-field high-energy diffraction microscopy and microcomputed tomography X-ray techniques were used to study a bulk single crystal nickel-titanium shape memory alloy sample subjected to thermal cycling under a constant applied load. Three-dimensional in situ reconstructions of the austenite microstructure are presented, including the structure and distribution of emergent grain boundaries. After one cycle, the subgrain structure is significantly refined, and heterogeneous Σ3 and Σ9 grain boundaries emerge. The low volume and uneven dispersion of the emergent Σ boundaries across the volume show why previous transmission electron microscopy investigations of Σ grain boundary formation were inconsistent.
△ Less
Submitted 19 December, 2018; v1 submitted 14 October, 2018;
originally announced October 2018.
-
Ferroelastic twin reorientation mechanisms in shape memory alloys elucidated with 3D X-ray microscopy
Authors:
Ashley N. Bucsek,
Darren C. Pagan,
L. Casalena,
Yuriy Chumlyakov,
Michael J. Mills,
Aaron P. Stebner
Abstract:
Three-dimensional (3D) X-ray diffraction methods were used to analyze the evolution of the load-induced rearrangements of monoclinic twin microstructures within bulk nickel-titanium specimens in 3D and across six orders of magnitude in length scales: changes in lattice plane spacings and orientations at the nanoscale, growth and nucleation of martensite twin variants at the microscale, and localiz…
▽ More
Three-dimensional (3D) X-ray diffraction methods were used to analyze the evolution of the load-induced rearrangements of monoclinic twin microstructures within bulk nickel-titanium specimens in 3D and across six orders of magnitude in length scales: changes in lattice plane spacings and orientations at the nanoscale, growth and nucleation of martensite twin variants at the microscale, and localization of plastic strain into deformation bands at the macroscale. Portions of the localized deformation bands were reconstructed in situ and in 3D. Analyses of the data elucidate the sequence of twin rearrangement mechanisms that occur within the propagating localized deformation bands, connect these mechanisms to the texture evolution, and reveal the effects of geometrically necessary lattice curvature across the band interfaces. The similarities between shear bands and localized deformation bands in twin reorientation are also discussed. These findings will guide future researchers in employing twin rearrangement in novel multiferroic technologies, and they demonstrate the strength of 3D, multiscale, in situ experiments to improve our understanding of complicated material behaviors and to provide opportunities to advance our abilities to model them.
△ Less
Submitted 19 December, 2018; v1 submitted 2 October, 2018;
originally announced October 2018.
-
Epitaxial Ferromagnetic Nanoislands of Cubic GdN in Hexagonal GaN
Authors:
T. F. Kent,
J. Yang,
L. Yang,
M. J. Mills,
R. C. Myers
Abstract:
Periodic structures of GdN particles encapsulated in a single crystalline GaN matrix were prepared by plasma assisted molecular beam epitaxy. High resolution X-ray diffractometery shows that GdN islands, with rock salt structure are epitaxially oriented to the wurtzite GaN matrix. Scanning transmission electron microscopy combined with in-situ reflection high energy electron diffraction allows for…
▽ More
Periodic structures of GdN particles encapsulated in a single crystalline GaN matrix were prepared by plasma assisted molecular beam epitaxy. High resolution X-ray diffractometery shows that GdN islands, with rock salt structure are epitaxially oriented to the wurtzite GaN matrix. Scanning transmission electron microscopy combined with in-situ reflection high energy electron diffraction allows for the study of island formation dynamics, which occurs after 1.2 monolayers of GdN coverage. Magnetometry reveals two ferromagnetic phases, one due to GdN particles with Curie temperature of 70K and a second, anomalous room temperature phase.
△ Less
Submitted 23 March, 2012; v1 submitted 29 February, 2012;
originally announced March 2012.
-
Coaxial Nanowire Resonant Tunneling Diodes from non-polar AlN/GaN on Silicon
Authors:
S. D. Carnevale,
C. Marginean,
P. J. Phillips,
T. F. Kent,
A. T. M. G. Sarwar,
M. J. Mills,
R. C. Myers
Abstract:
Resonant tunneling diodes are formed using AlN/GaN core-shell nanowire heterostructures grown by plasma assisted molecular beam epitaxy on n-Si(111) substrates. By using a coaxial geometry these devices take advantage of non-polar (m-plane) nanowire sidewalls. Device modeling predicts non-polar orientation should enhance resonant tunneling compared to a polar structure and that AlN double barriers…
▽ More
Resonant tunneling diodes are formed using AlN/GaN core-shell nanowire heterostructures grown by plasma assisted molecular beam epitaxy on n-Si(111) substrates. By using a coaxial geometry these devices take advantage of non-polar (m-plane) nanowire sidewalls. Device modeling predicts non-polar orientation should enhance resonant tunneling compared to a polar structure and that AlN double barriers will lead to higher peak-to-valley current ratios compared to AlGaN barriers. Electrical measurements of ensembles of nanowires show negative differential resistance appearing only at cryogenic temperature. Individual nanowire measurements show negative differential resistance at room temperature with peak current density of 5*10^5 A/cm^2.
△ Less
Submitted 23 March, 2012; v1 submitted 27 February, 2012;
originally announced February 2012.
-
Avalanches on a conical bead pile: scaling with tuning parameters
Authors:
S. Y. Lehman,
Elizabeth Baker,
Howard A. Henry,
Andrew J. Kindschuh,
Larry C. Markley,
Megan B. Browning,
Mary E. Mills,
R. Michael Winters IV,
D. T. Jacobs
Abstract:
Uniform spherical beads were used to explore the behavior of a granular system near its critical angle of repose on a conical bead pile. We found two tuning parameters that could take the system to a critical point where a simple power-law described the avalanche size distribution as predicted by self-organized criticality, which proposed that complex dynamical systems self-organize to a critical…
▽ More
Uniform spherical beads were used to explore the behavior of a granular system near its critical angle of repose on a conical bead pile. We found two tuning parameters that could take the system to a critical point where a simple power-law described the avalanche size distribution as predicted by self-organized criticality, which proposed that complex dynamical systems self-organize to a critical point without need for tuning. Our distributions were well described by a simple power-law with the power τ = 1.5 when dropping beads slowly onto the apex of a bead pile from a small height. However, we could also move the system from the critical point using either of two tuning parameters: the height from which the beads fell onto the top of the pile or the region over which the beads struck the pile. As the drop height increased, the system did not reach the critical point yet the resulting distributions were independent of the bead mass, coefficient of friction, or coefficient of restitution. All our apex-dropping distributions for any type of bead (glass, stainless steel, zirconium) showed universality by scaling onto a common curve with τ = 1.5 and σ = 1.0, where 1/σ is the power of the tuning parameter. From independent calculations using the moments of the distribution, we find values for τ = 1.6 \pm 0.1 and σ = 0.91 \pm 0.15. When beads were dropped across the surface of the pile instead of solely on the apex, then the system also moved from the critical point and again the avalanche size distributions fell on a common curve when scaled similarly using the same values of τ and σ. We also observed that an hcp structure on the base of the pile caused an emergent structure in the pile that had six faces with some fcc or hcp structure.
△ Less
Submitted 24 February, 2012; v1 submitted 2 January, 2012;
originally announced January 2012.
-
Price fluctuations from the order book perspective - empirical facts and a simple model
Authors:
Sergei Maslov,
Mark Mills
Abstract:
Statistical properties of an order book and the effect they have on price dynamics were studied using the high-frequency NASDAQ Level II data. It was observed that the size distribution of marketable orders (transaction sizes) has power law tails with an exponent 1+mu_{market}=2.4 \pm 0.1. The distribution of limit order sizes was found to be consistent with a power law with an exponent close to…
▽ More
Statistical properties of an order book and the effect they have on price dynamics were studied using the high-frequency NASDAQ Level II data. It was observed that the size distribution of marketable orders (transaction sizes) has power law tails with an exponent 1+mu_{market}=2.4 \pm 0.1. The distribution of limit order sizes was found to be consistent with a power law with an exponent close to 2. A somewhat better fit to this distribution was obtained by using a log-normal distribution with an effective power law exponent equal to 2 in the middle of the observed range. The depth of the order book measured as a price impact of a hypothetical large market order was observed to be a non-linear function of its size. A large imbalance in the number of limit orders placed at bid and ask sides of the book was shown to lead to a short term deterministic price change, which is in accord with the law of supply and demand.
△ Less
Submitted 28 February, 2001;
originally announced February 2001.
