Showing 1–50 of 64 results for author: Miller, M

Numerical methods for unraveling inter-particle potentials in colloidal suspensions: A comparative study for two-dimensional suspensions

Authors: Clare R. Rees-Zimmerman, José Martín-Roca, David Evans, Mark A. Miller, Dirk G. A. L. Aarts, Chantal Valeriani

Abstract: We compare three model-free numerical methods for inverting structural data to obtain interaction potentials, namely iterative Boltzmann inversion (IBI), test-particle insertion (TPI), and a machine-learning (ML) approach called ActiveNet. Three archetypal models of two-dimensional colloidal systems are used as test cases: Weeks--Chandler--Anderson short-ranged repulsion, the Lennard-Jones potenti… ▽ More We compare three model-free numerical methods for inverting structural data to obtain interaction potentials, namely iterative Boltzmann inversion (IBI), test-particle insertion (TPI), and a machine-learning (ML) approach called ActiveNet. Three archetypal models of two-dimensional colloidal systems are used as test cases: Weeks--Chandler--Anderson short-ranged repulsion, the Lennard-Jones potential, and a repulsive shoulder interaction with two length scales. Additionally, data on an experimental suspension of colloidal spheres are acquired by optical microscopy and used to test the inversion methods. The methods have different merits. IBI is the only choice when the radial distribution function is known but particle coordinates are unavailable. TPI requires snapshots with particle positions and can extract both pair- and higher-body potentials without the need for simulation. The ML approach can only be used when particles can be tracked in time and it returns the force rather than the potential. However, it can unravel pair interactions from any one-body forces (such as drag or propulsion) and does not rely on equilibrium distributions for its derivation. Our results may serve as a guide when a numerical method is needed for application to experimental data, and as a reference for further development of the methodology itself. △ Less

Submitted 15 March, 2025; originally announced March 2025.

Comments: This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in J. Chem. Phys. 162, 074103 (2025) and may be found at doi.org/10.1063/5.0246890

Journal ref: J. Chem. Phys. 162, 074103 (2025)

Re-entrant percolation in active Brownian hard disks

Authors: David Evans, José Martín-Roca, Nathan J. Harmer, Chantal Valeriani, Mark A. Miller

Abstract: Non-equilibrium clustering and percolation are investigated in an archetypal model of two-dimensional active matter using dynamic simulations of self-propelled Brownian repulsive particles. We concentrate on the single-phase region up to moderate levels of activity, before motility-induced phase separation (MIPS) sets in. Weak activity promotes cluster formation and lowers the percolation threshol… ▽ More Non-equilibrium clustering and percolation are investigated in an archetypal model of two-dimensional active matter using dynamic simulations of self-propelled Brownian repulsive particles. We concentrate on the single-phase region up to moderate levels of activity, before motility-induced phase separation (MIPS) sets in. Weak activity promotes cluster formation and lowers the percolation threshold. However, driving the system further out of equilibrium partly reverses this effect, resulting in a minimum in the critical density for the formation of system-spanning clusters and introducing re-entrant percolation as a function of activity in the pre-MIPS regime. This non-monotonic behaviour arises from competition between activity-induced effective attraction (which eventually leads to MIPS) and activity-driven cluster breakup. Using an adapted iterative Boltzmann inversion method, we derive effective potentials to map weakly active cases onto a passive (equilibrium) model with conservative attraction, which can be characterised by Monte Carlo simulations. While the active and passive systems have practically identical radial distribution functions, we find decisive differences in higher-order structural correlations, to which the percolation threshold is highly sensitive. For sufficiently strong activity, no passive pairwise potential can reproduce the radial distribution function of the active system. △ Less

Submitted 6 September, 2024; originally announced September 2024.

Following your nose: Autochemotaxis and other mechanisms for spinodal decomposition in flocks

Authors: Maxx Miller, John Toner

Abstract: We develop the hydrodynamic theory of dry, polar ordered, active matter (``flocking") with autochemotaxis; i.e., self-propelled entities moving in the same direction, each emitting a substance which attracts the others (e.g., ants). We find that sufficiently strong autochemotaxis leads to an instability to phase separation into one high and one low density band. This is very analogous to both equi… ▽ More We develop the hydrodynamic theory of dry, polar ordered, active matter (``flocking") with autochemotaxis; i.e., self-propelled entities moving in the same direction, each emitting a substance which attracts the others (e.g., ants). We find that sufficiently strong autochemotaxis leads to an instability to phase separation into one high and one low density band. This is very analogous to both equilibrium phase separation, and ``motility induced phase separation" (``MIPS") and can occur in flocks due to any microscopic mechanism (e.g., sufficiently strong attractive interactions) that makes the entities cohere. △ Less

Submitted 4 January, 2024; originally announced January 2024.

Comments: 6 pages, 5 figures. arXiv admin note: substantial text overlap with arXiv:2401.09461

Spinodal decomposition and phase separation in polar active matter

Authors: Maxx Miller, John Toner

Abstract: We develop and study the hydrodynamic theory of flocking with autochemotaxis. This describes large collections of self-propelled entities all spontaneously moving in the same direction, each emitting a substance which attracts the others (e.g., ants). The theory combines features of the Keller-Segel model for autochemotaxis with the Toner-Tu theory of flocking. We find that sufficiently strong aut… ▽ More We develop and study the hydrodynamic theory of flocking with autochemotaxis. This describes large collections of self-propelled entities all spontaneously moving in the same direction, each emitting a substance which attracts the others (e.g., ants). The theory combines features of the Keller-Segel model for autochemotaxis with the Toner-Tu theory of flocking. We find that sufficiently strong autochemotaxis leads to an instability of the uniformly moving state (the ``flock"), in which bands of different density form moving parallel to the mean flock velocity with different speeds. These bands, which are reminiscent of ant trails, coarsen over time to reach a phase-separated state, in which one high density and one low density band fill the entire system. The same instability, described by the same hydrodynamic theory, can occur in flocks phase separating due to any microscopic mechanism (e.g., sufficiently strong attractive interactions). Although in many ways analogous to equilibrium phase separation via spinodal decomposition, the two steady state densities here are determined not by a common tangent construction, as in equilibrium, but by an uncommon tangent construction very similar to that found for motility induced phase separation (MIPS) of disordered active particles. Our analytic theory agrees well with our numerical simulations of our equations of motion. △ Less

Submitted 4 January, 2024; originally announced January 2024.

Comments: 27 pages, 16 figures some reused for readability

Phase separation in ordered polar active fluids: A new Universality class

Authors: Maxx Miller, John Toner

Abstract: We show that phase separation in ordered polar active fluids belongs to a new universality class. This describes large collections of self-propelled entities (``flocks"), all spontaneously moving in the same direction, in which attractive interactions (which can be caused by, e.g., autochemotaxis) cause phase separation: the system spontaneously separates into a high density band and a low density… ▽ More We show that phase separation in ordered polar active fluids belongs to a new universality class. This describes large collections of self-propelled entities (``flocks"), all spontaneously moving in the same direction, in which attractive interactions (which can be caused by, e.g., autochemotaxis) cause phase separation: the system spontaneously separates into a high density band and a low density band, moving parallel to each other, and to the direction of mean flock motion, at different speeds. The upper critical dimension for this transition is $d_c=5$, in contrast to the well-known $d_c=4$ of equilibrium phase separation. We obtain the large-distance, long-time scaling laws of the velocity and density fluctuations, which are characterized by universal critical correlation length and order parameter exponents $ν_\perp$, $ν_\parallel$ and $β$ respectively. We calculate these to $\mathcal{O} (ε)$ in a $d=5-ε$ expansion. △ Less

Submitted 11 January, 2024; originally announced January 2024.

Comments: 21 pages, 9 figures

Introducing dusty plasma particle growth of nanospherical titanium dioxide

Authors: Bhavesh Ramkorun, Swapneal Jain, Adib Taba, Masoud Mahjouri-Samani, Michael E. Miller, Saikat C. Thakur, Edward Thomas Jr., Ryan B. Comes

Abstract: In dusty plasma environments, the spontaneous growth of nanoparticles from reactive gases has been extensively studied for over three decades, primarily focusing on hydrocarbons and silicate particles. Here, we introduce the growth of titanium dioxide, a wide band gap semiconductor, as dusty plasma nanoparticles. The resultant particles exhibited a spherical morphology and reached a maximum homoge… ▽ More In dusty plasma environments, the spontaneous growth of nanoparticles from reactive gases has been extensively studied for over three decades, primarily focusing on hydrocarbons and silicate particles. Here, we introduce the growth of titanium dioxide, a wide band gap semiconductor, as dusty plasma nanoparticles. The resultant particles exhibited a spherical morphology and reached a maximum homogeneous radius of 230 $\pm$ 17 nm after an elapsed time of 70 seconds. The particle grew linearly and the growth displayed a cyclic behavior; that is, upon reaching their maximum radius, the largest particles fell out of the plasma, and a new growth cycle immediately followed. The particles were collected after being grown for different amounts of time and imaged using scanning electron microscopy. Further characterization was carried out using energy dispersive X-ray spectroscopy, X-ray diffraction and Raman spectroscopy to elucidate the chemical composition and crystalline properties of the maximally sized particles. Initially, the as-grown particles after 70 seconds exhibited an amorphous structure. However, annealing treatments at temperatures of 400 $^\circ$C and 800 $^\circ$C induced crystallization, yielding anatase and rutile phases, respectively. Notably, annealing at 600 $^\circ$C resulted in a mixed phase of anatase and rutile. These findings open new avenues for a rapid and controlled growth technique of titanium dioxide as dusty plasma. △ Less

Submitted 26 October, 2023; originally announced October 2023.

Comments: 8 pages, 5 figures

Journal ref: Appl. Phys. Lett. 124, 144102 (2024)

Direct determination of the spin-polarization at buried interfaces using voltage dependent MOKE signals

Authors: Michael Miller, Rene Nacke, Sven Ilse, Gisela Schütz, Eberhard Goering

Abstract: Here, we report a novel and conceptually straightforward technique to detect the spin-polarization directly, with laser spot spatial resolution, at buried ferromagnet/insulator interfaces in ambient settings. This has been accomplished by monitoring the voltage-induced change of the longitudinal MOKE signal as a function of the applied magnetic field and applying an AC voltage across the interface… ▽ More Here, we report a novel and conceptually straightforward technique to detect the spin-polarization directly, with laser spot spatial resolution, at buried ferromagnet/insulator interfaces in ambient settings. This has been accomplished by monitoring the voltage-induced change of the longitudinal MOKE signal as a function of the applied magnetic field and applying an AC voltage across the interface. For the case where the spin polarization enters the VMOKE signal, a simple quantitative model is proposed. A distinct positive majority spin polarization has been found for Fe and Co, whereas Ni exhibits a negative minority spin polarization. △ Less

Submitted 13 February, 2024; v1 submitted 11 August, 2023; originally announced August 2023.

Calculating and resumming the classical virial expansion using automated algebra

Authors: Aaron M. Miller, Joaquín E. Drut

Abstract: Using schematic model potentials, we calculate exactly the virial coefficients of a classical gas up to sixth order and use them to assess the convergence properties of the virial expansion of basic thermodynamic quantities such as pressure, density, and compressibility. At sufficiently strong couplings, as expected, the virial expansion fails to converge. However, at least for the interactions an… ▽ More Using schematic model potentials, we calculate exactly the virial coefficients of a classical gas up to sixth order and use them to assess the convergence properties of the virial expansion of basic thermodynamic quantities such as pressure, density, and compressibility. At sufficiently strong couplings, as expected, the virial expansion fails to converge. However, at least for the interactions and parameter ranges we explored, we find that Padé-Borel resummation methods are extremely effective in improving the convergence of the expansion. △ Less

Submitted 24 July, 2023; originally announced July 2023.

Comments: 9 pages, 12 figures

A Virtual Diffractometer For Creating Synthetic HEDM Images of Tessellated and Meshed Finite Element Polycrystals

Authors: Paul R. Dawson, Matthew P. Miller

Abstract: To assist in the planning of in situ loading, HEDM experiments by generating synthetic diffraction images of virtual samples in loaded and unloaded states. The user designates a target grain in the virtual sample and specifies the set of reflections for which images are to be generated. The code generates several intermediate images, including: (1) the points of intersection between the diffracted… ▽ More To assist in the planning of in situ loading, HEDM experiments by generating synthetic diffraction images of virtual samples in loaded and unloaded states. The user designates a target grain in the virtual sample and specifies the set of reflections for which images are to be generated. The code generates several intermediate images, including: (1) the points of intersection between the diffracted beam direction vector the detector plane; (2) reflection-dependent frequency distributions of the diffraction angle, $ω$; and (3) plots of the diffraction volume-weighted intensity distributions for the specified set of reflections. The final sets of plots are facsimiles of pixelated detector images which take into account characteristics of specific detectors, including its pixel size and point spread behavior. △ Less

Submitted 30 March, 2023; originally announced March 2023.

Comments: 22 pages with 27 figures and 3 tables

Order and density fluctuations near the boundary in sheared dense suspensions

Authors: Joia M. Miller, Daniel L. Blair, Jeffrey S. Urbach

Abstract: We introduce a novel approach to reveal ordering fluctuations in sheared dense suspensions, using line scanning in a combined rheometer and laser scanning confocal microscope. We validate the technique with a moderately dense suspension, observing modest shear-induced ordering and a nearly linear flow profile. At high concentration ($φ= 0.55$) and applied stress just below shear thickening, we rep… ▽ More We introduce a novel approach to reveal ordering fluctuations in sheared dense suspensions, using line scanning in a combined rheometer and laser scanning confocal microscope. We validate the technique with a moderately dense suspension, observing modest shear-induced ordering and a nearly linear flow profile. At high concentration ($φ= 0.55$) and applied stress just below shear thickening, we report ordering fluctuations with high temporal resolution, and directly measure a decrease in order with distance from the suspension's bottom boundary as well as a direct correlation between order and particle concentration. Higher applied stress produces shear thickening with large fluctuations in boundary stress which we find are accompanied by dramatic fluctuations in suspension flow speeds. The peak flow rates are independent of distance from the suspension boundary, indicating that they likely arise from transient jamming that creates solid-like aggregates of particles moving together, but only briefly because the high speed fluctuations are interspersed with regions flowing much more slowly, suggesting that shear thickening suspensions possess complex internal structural dynamics, even in relatively simple geometries. △ Less

Submitted 3 November, 2022; originally announced November 2022.

Designing low-cost TaC virtual substrates for $Al_xGa_{1-x}N$ epitaxy

Authors: Dennice M. Roberts, Andrew Norman, Moira K. Miller, M. Brooks Tellekamp

Abstract: $Al_xGa_{1-x}N$ is a critical ultra-wide bandgap material for optoelectronics, but the deposition of thick, high quality epitaxial layers has been hindered by a lack of lattice-matched substrates. Here we identify the (111) face of transition metal carbides as a suitable class of materials for substrates lattice matched to (0001) $Al_xGa_{1-x}N… ▽ More $Al_xGa_{1-x}N$ is a critical ultra-wide bandgap material for optoelectronics, but the deposition of thick, high quality epitaxial layers has been hindered by a lack of lattice-matched substrates. Here we identify the (111) face of transition metal carbides as a suitable class of materials for substrates lattice matched to (0001) $Al_xGa_{1-x}N$ and demonstrate the growth of thin film TaC which has an effective hexagonal lattice constant matched to $Al_{0.45}Ga_{0.55}N$. We explore growth conditions for sputtered TaC on sapphire substrates and investigate the effects of sputter power, layer thickness and incident plasma angle on film structure and in- and out-of-plane strain. We then show critical improvements to film quality by annealing films in a face-to-face configuration at 1600 $^\circ$C, which significantly reduces full width at half max (FWHM) of in- and out-of-plane diffraction peaks and results in a step-and-terrace surface morphology. This work presents a path toward electrically conductive, lattice matched, thermally compatible substrates for $Al_xGa_{1-x}N$ heteroepitaxy, a critical step for vertical devices and other power electronics applications. △ Less

Submitted 24 August, 2022; originally announced August 2022.

Comments: 6 figures, supporting information available

Structure of propagating high stress fronts in a shear thickening suspension

Authors: Vikram Rathee, Joia M. Miller, Daniel L. Blair, Jeffrey S. Urbach

Abstract: We report direct measurements of spatially resolved stress at the boundary of a shear thickening cornstarch suspension revealing persistent regions of high local stress propagating in the flow direction at the speed of the top boundary. The persistence of these propagating fronts enables precise measurements of their structure, including the profile of boundary stress measured by Boundary Stress M… ▽ More We report direct measurements of spatially resolved stress at the boundary of a shear thickening cornstarch suspension revealing persistent regions of high local stress propagating in the flow direction at the speed of the top boundary. The persistence of these propagating fronts enables precise measurements of their structure, including the profile of boundary stress measured by Boundary Stress Microscopy (BSM) and the non-affine velocity of particles at the bottom boundary of the suspension measured by particle image velocimetry (PIV). In addition, we directly measure the relative flow between the particle phase and the suspending fluid (fluid migration) and find the migration is highly localized to the fronts and changes direction across the front, indicating that the fronts are composed of a localized region of high dilatant pressure and low particle concentration. The magnitude of the flow indicates that the pore pressure difference driving the fluid migration is comparable to the critical shear stress for the onset of shear thickening. The propagating fronts fully account for the increase in viscosity with applied stress reported by the rheometer and are consistent with the existence of a stable jammed region in contact with one boundary of the system that generates a propagating network of percolated frictional contacts spanning the gap between the rheometer plates and producing strong localized dilatant pressure. △ Less

Submitted 4 March, 2022; originally announced March 2022.

Extracting the lifetime of a synthetic two-level system

Authors: Gabriel Margiani, Sebastian Guerrero, Toni L. Heugel, Christian Marty, Raphael Pachlatko, Thomas Gisler, Gabrielle D. Vukasin, Hyun-Keun Kwon, James ML. Miller, Nicholas E. Bousse, Thomas W. Kenny, Oded Zilberberg, Deividas Sabonis, Alexander Eichler

Abstract: The Kerr Parametric Oscillator (KPO) is a nonlinear resonator system that is often described as a synthetic two-level system. In the presence of noise, the system switches between two states via a fluctuating trajectory in phase space, instead of following a straight path. The presence of such fluctuating trajectories makes it hard to establish a precise count or even a useful definition, of the "… ▽ More The Kerr Parametric Oscillator (KPO) is a nonlinear resonator system that is often described as a synthetic two-level system. In the presence of noise, the system switches between two states via a fluctuating trajectory in phase space, instead of following a straight path. The presence of such fluctuating trajectories makes it hard to establish a precise count or even a useful definition, of the "lifetime" of the state. Addressing this issue, we compare several rate counting methods that allow to estimate a lifetime for the levels. In particular, we establish that a peak in the Allan variance of fluctuations can also be used to determine the levels' lifetime. Our work provides a basis for characterizing KPO networks for simulated annealing where an accurate determination of the state lifetime is of fundamental importance. △ Less

Submitted 26 October, 2022; v1 submitted 6 December, 2021; originally announced December 2021.

Journal ref: Appl. Phys. Lett. 121, 164101 (2022)

Using Discrete Harmonic Expansions and Equilibrium Conditions to Estimate Intragrain Stress Distributions in Polycrystals from Grain-Averaged Data

Authors: Paul R. Dawson, Matthew. P. Miller

Abstract: The application of harmonic expansions to estimate intra-grain stress distributions from grain-averaged stress data is presented that extends the capabilities of the open source code, MechMonics. The method is based on using an optimization algorithm to determine the harmonic expansion weights that reduce the violation of equilibrium while maintaining prescribed grain-averages. The method is demon… ▽ More The application of harmonic expansions to estimate intra-grain stress distributions from grain-averaged stress data is presented that extends the capabilities of the open source code, MechMonics. The method is based on using an optimization algorithm to determine the harmonic expansion weights that reduce the violation of equilibrium while maintaining prescribed grain-averages. The method is demonstrated using synthetic data generated for uniaxial extension of a virtual polycrystal with the mechMet code. △ Less

Submitted 29 June, 2021; originally announced June 2021.

Comments: 15 pages, 8 figures and 3 tables

Analysis of a Three-Dimensional Slip Field in a Hexagonal Ti Alloy from in-situ High-Energy X-ray Diffraction Microscopy Data

Authors: Darren C. Pagan, Kelly E. Nygren, Matthew P. Miller

Abstract: Here we analyze a three-dimensional distribution of crystallographic slip measured in-situ during the uniaxial deformation of hexagonal Ti-7Al. The slip field is reconstructed using a novel methodology that combines spatially resolved lattice orientation fields and grain-averaged stresses measured using high-energy X-ray diffraction microscopy (HEDM) with crystal plasticity. Analysis is performed… ▽ More Here we analyze a three-dimensional distribution of crystallographic slip measured in-situ during the uniaxial deformation of hexagonal Ti-7Al. The slip field is reconstructed using a novel methodology that combines spatially resolved lattice orientation fields and grain-averaged stresses measured using high-energy X-ray diffraction microscopy (HEDM) with crystal plasticity. Analysis is performed to explore lattice orientation dependence, stress dependence, and connectivity (network relationships) of grains experiencing elevated amounts of slip. Elevated slip is found to be primarily associated with a single large network of connected grains, and within this network, a clustered group of grains oriented favorably for slip are found to have outsized structural importance. The effect of different rate sensitivities of families of slip systems on reconstructed slip activity is also discussed. △ Less

Submitted 25 April, 2021; originally announced April 2021.

Nearest-neighbor connectedness theory: A general approach to continuum percolation

Authors: Fabian Coupette, René de Bruijn, Petrus Bult, Shari Finner, Mark A. Miller, Paul van der Schoot, Tanja Schilling

Abstract: We introduce a method to estimate continuum percolation thresholds and illustrate its usefulness by investigating geometric percolation of non-interacting line segments and disks in two spatial dimensions. These examples serve as models for electrical percolation of elongated and flat nanofillers in thin film composites. While the standard contact volume argument and extensions thereof in connecte… ▽ More We introduce a method to estimate continuum percolation thresholds and illustrate its usefulness by investigating geometric percolation of non-interacting line segments and disks in two spatial dimensions. These examples serve as models for electrical percolation of elongated and flat nanofillers in thin film composites. While the standard contact volume argument and extensions thereof in connectedness percolation theory yield accurate predictions for slender nanofillers in three dimensions, they fail to do so in two dimensions, making our test a stringent one. In fact, neither a systematic order-by-order correction to the standard argument nor invoking the connectedness version of the Percus-Yevick approximation yield significant improvements for either type of particle. Making use of simple geometric considerations, our new method predicts a percolation threshold of $ρ_c l^2 \approx 5.83$ for segments of length $l$, which is close to the $ρ_c l^2 \approx 5.64$ found in Monte Carlo simulations. For disks of area $a$ we find $ρ_c a \approx 1.00$, close to the Monte Carlo result of $ρ_c a \approx 1.13$. We discuss the shortcomings of the conventional approaches and explain how usage of the nearest-neighbor distribution in our new method bypasses those complications. △ Less

Submitted 23 March, 2021; originally announced March 2021.

Mechanical Analyses using Discrete Harmonic Expansions of Grain-Based Field Data

Authors: Paul R. Dawson, Matthew P. Miller

Abstract: A methodology for computing expansion basis functions using discrete harmonic modes is presented. The discrete harmonic modes are determined grain-by-grain for virtual polycrystals for which finite element meshes are available. The expansion weights associated with representing field variables over grain domains are determined by exploiting the orthogonality of the harmonic modes. The methodology… ▽ More A methodology for computing expansion basis functions using discrete harmonic modes is presented. The discrete harmonic modes are determined grain-by-grain for virtual polycrystals for which finite element meshes are available. The expansion weights associated with representing field variables over grain domains are determined by exploiting the orthogonality of the harmonic modes. The methodology is demonstrated with the representation of the axial stress distributions during tensile loading of a polycrystalline sample. An open source code, MechMonics, is available to researchers wishing to use the methodology to analyze data. △ Less

Submitted 9 March, 2021; originally announced March 2021.

Comments: 23 pages; 39 figures

Control of superselectivity by crowding in three-dimensional hosts

Authors: Andrew T. R. Christy, Halim Kusumaatmaja, Mark A. Miller

Abstract: Motivated by the fine compositional control observed in membraneless droplet organelles in cells, we investigate how a sharp binding-unbinding transition can occur between multivalent client molecules and receptors embedded in a porous three-dimensional structure. In contrast to similar superselective binding previously observed at surfaces, we have identified that a key effect in a three-dimensio… ▽ More Motivated by the fine compositional control observed in membraneless droplet organelles in cells, we investigate how a sharp binding-unbinding transition can occur between multivalent client molecules and receptors embedded in a porous three-dimensional structure. In contrast to similar superselective binding previously observed at surfaces, we have identified that a key effect in a three-dimensional environment is that the presence of inert crowding agents can significantly enhance or even introduce superselectivity. In essence, molecular crowding initially suppresses binding via an entropic penalty, but the clients can then more easily form many bonds simultaneously. We demonstrate the robustness of the superselective behavior with respect to client valency, linker length and binding interactions in Monte Carlo simulations of an archetypal lattice polymer model. △ Less

Submitted 13 December, 2020; originally announced December 2020.

Comments: Accepted for publication in Phys Rev Lett: https://journals.aps.org/prl/accepted/0b074Yd7G1417b7950025d20d8859c7cb116edf4c

Spatially Resolved Persistent Photoconductivity in MoS$_2$-WS$_2$ Lateral Heterostructures

Authors: Samuel Berweger, Hanyu Zhang, Prasana K. Sahoo, Benjamin M. Kupp, Jeffrey L. Blackburn, Elisa M. Miller, T. Mitch Wallis, Dmitri V. Voronine, Pavel Kabos, Sanjini U. Nanayakkara

Abstract: The optical and electronic properties of 2D semiconductors are intrinsically linked via the strong interactions between optically excited bound species and free carriers. Here we use near-field scanning microwave microscopy (SMM) to image spatial variations in photoconductivity in MoS$_2$--WS$_2$ lateral multijunction heterostructures using photon energy-resolved narrowband illumination. We find t… ▽ More The optical and electronic properties of 2D semiconductors are intrinsically linked via the strong interactions between optically excited bound species and free carriers. Here we use near-field scanning microwave microscopy (SMM) to image spatial variations in photoconductivity in MoS$_2$--WS$_2$ lateral multijunction heterostructures using photon energy-resolved narrowband illumination. We find that the onset of photoconductivity in individual domains corresponds to the optical absorption onset, confirming that the tightly bound excitons in transition metal dichalcogenides can nonetheless dissociate into free carriers. These photogenerated carriers are most likely n-type and are seen to persist for up to days, and informed by finite element modeling we reveal that they can increase the carrier density by up to 200 times. This persistent photoconductivity appears to be dominated by contributions from the multilayer MoS$_2$ domains, and we attribute the flake-wide response in part to charge transfer across the heterointerface. Spatial correlation of our SMM imaging with photoluminescence (PL) mapping confirms the strong link between PL peak emission photon energy, PL intensity, and the local accumulated charge. This work reveals the spatially and temporally complex optoelectronic response of these systems and cautions that properties measured during or after illumination may not reflect the true dark state of these materials but rather a metastable charged state. △ Less

Submitted 10 August, 2020; originally announced August 2020.

Comments: 27 pages, 5 figures

Phase transitions on non-uniformly curved surfaces: Coupling between phase and location

Authors: Jack O. Law, Jacob M. Dean, Mark A. Miller, Halim Kusumaatmaja

Abstract: For particles confined to two dimensions, any curvature of the surface affects the structural, kinetic and thermodynamic properties of the system. If the curvature is non-uniform, an even richer range of behaviours can emerge. Using a combination of bespoke Monte Carlo, molecular dynamics and basin-hopping methods, we show that the stable states of attractive colloids confined to non-uniformly cur… ▽ More For particles confined to two dimensions, any curvature of the surface affects the structural, kinetic and thermodynamic properties of the system. If the curvature is non-uniform, an even richer range of behaviours can emerge. Using a combination of bespoke Monte Carlo, molecular dynamics and basin-hopping methods, we show that the stable states of attractive colloids confined to non-uniformly curved surfaces are distinguished not only by the phase of matter but also by their location on the surface. Consequently, the transitions between these states involve cooperative migration of the entire colloidal assembly. We demonstrate these phenomena on toroidal and sinusoidal surfaces for model colloids with different ranges of interactions as described by the Morse potential. In all cases, the behaviour can be rationalised in terms of three universal considerations: cluster perimeter, stress, and the packing of next-nearest neighbours. △ Less

Submitted 6 August, 2020; originally announced August 2020.

Comments: 9 pages, 9 figures, accepted in Soft Matter, SI can be requested to the authors

On the effect of linear feedback and parametric pumping on a resonators frequency stability

Authors: Zohreh Mohammadi, Toni L. Heugel, James M. L. Miller, Dongsuk D. Shin, Hyun-Keun Kwon, Thomas W. Kenny, Ramasubramanian Chitra, Oded Zilberberg, Luis Guillermo Villanueva

Abstract: Resonant sensors based on Micro- and Nano-Electro Mechanical Systems (M/NEMS) are ubiquitous in many sensing applications due to their outstanding performance capabilities, which are directly proportional to the quality factor (Q) of the devices. We address here a recurrent question in the field: do dynamical techniques that modify the effective Q (namely parametric pumping and direct drive veloci… ▽ More Resonant sensors based on Micro- and Nano-Electro Mechanical Systems (M/NEMS) are ubiquitous in many sensing applications due to their outstanding performance capabilities, which are directly proportional to the quality factor (Q) of the devices. We address here a recurrent question in the field: do dynamical techniques that modify the effective Q (namely parametric pumping and direct drive velocity feedback) affect the performance of said sensors? We develop analytical models of both cases, while remaining in the linear regime, and introduce noise in the system from two separate sources: thermomechanical and amplifier (read-out) noise. We observe that parametric pumping enhances the quality factor in the amplitude response, but worsens it in the phase response on the resonator. In the case of feedback, we find that Q is enhanced in both cases. Then, we establish a solution for the noisy problem with direct drive and parametric pumping simultaneously. We also find that, in the case when thermomechanical noise dominates, no benefit can be obtained from neither artificial Q-enhancement technique. However, in the case when amplifier noise dominates, we surprisingly observe that a significant advantage can only be achieved using parametric pumping in the squeezing region. △ Less

Submitted 31 May, 2020; originally announced June 2020.

Microscopic Relaxation Channels in Materials for Superconducting Qubits

Authors: Anjali Premkumar, Conan Weiland, Sooyeon Hwang, Berthold Jaeck, Alexander P. M. Place, Iradwikanari Waluyo, Adrian Hunt, Valentina Bisogni, Jonathan Pelliciari, Andi Barbour, Mike S. Miller, Paola Russo, Fernando Camino, Kim Kisslinger, Xiao Tong, Mark S. Hybertsen, Andrew A. Houck, Ignace Jarrige

Abstract: Despite mounting evidence that materials imperfections are a major obstacle to practical applications of superconducting qubits, connections between microscopic material properties and qubit coherence are poorly understood. Here, we perform measurements of transmon qubit relaxation times $T_1$ in parallel with spectroscopy and microscopy of the thin polycrystalline niobium films used in qubit fabr… ▽ More Despite mounting evidence that materials imperfections are a major obstacle to practical applications of superconducting qubits, connections between microscopic material properties and qubit coherence are poorly understood. Here, we perform measurements of transmon qubit relaxation times $T_1$ in parallel with spectroscopy and microscopy of the thin polycrystalline niobium films used in qubit fabrication. By comparing results for films deposited using three techniques, we reveal correlations between $T_1$ and grain size, enhanced oxygen diffusion along grain boundaries, and the concentration of suboxides near the surface. Physical mechanisms connect these microscopic properties to residual surface resistance and $T_1$ through losses arising from the grain boundaries and from defects in the suboxides. Further, experiments show that the residual resistance ratio can be used as a figure of merit for qubit lifetime. This comprehensive approach to understanding qubit decoherence charts a pathway for materials-driven improvements of superconducting qubit performance. △ Less

Submitted 6 April, 2020; originally announced April 2020.

Controlling Fragment Competition on Pathways to Addressable Self-Assembly

Authors: Jim Madge, David Bourne, Mark A. Miller

Abstract: Addressable self-assembly is the formation of a target structure from a set of unique molecular or colloidal building-blocks, each of which occupies a defined location in the target. The requirement that each type of building-block appears exactly once in each copy of the target introduces severe restrictions on the combinations of particles and on the pathways that lead to successful self-assembl… ▽ More Addressable self-assembly is the formation of a target structure from a set of unique molecular or colloidal building-blocks, each of which occupies a defined location in the target. The requirement that each type of building-block appears exactly once in each copy of the target introduces severe restrictions on the combinations of particles and on the pathways that lead to successful self-assembly. These restrictions can limit the efficiency of self-assembly and the final yield of the product. In particular, partially formed fragments may compete with each other if their compositions overlap, since they cannot be combined. Here, we introduce a "completability" algorithm to quantify competition between self-assembling fragments and use it to deduce general principles for suppressing the effects of fragment incompatibility in the self-assembly of small addressable clusters. Competition originates from loops in the bonding network of the target structure, but loops may be needed to provide structural rigidity and thermodynamic stability. An optimal compromise can be achieved by careful choice of bonding networks and by promoting semi-hierarchical pathways that rule out competition between early fragments. These concepts are illustrated in simulations of self-assembly in two contrasting addressable targets of 20 unique components each. △ Less

Submitted 2 December, 2019; originally announced December 2019.

Comments: 35 pages (preprint style), 12 figures

Journal ref: J. Phys. Chem. B 122, 9815-9825 (2018)

All twist and no bend makes raft edges splay: Spontaneous curvature of domain edges in colloidal membranes

Authors: Joia M. Miller, Doug Hall, Joanna Robaszewski, Prerna Sharma, Michael F. Hagan, Gregory M. Grason, Zvonimir Dogic

Abstract: Using a combination of theory and experiments we study the interface between two immiscible domains in a colloidal membrane composed of rigid rods of different lengths. Geometric considerations of rigid rod packing imply that a domain of sufficiently short rods in a background membrane of long rods is more susceptible to twist than the inverse structure, a long-rod domain in a short-rod membrane b… ▽ More Using a combination of theory and experiments we study the interface between two immiscible domains in a colloidal membrane composed of rigid rods of different lengths. Geometric considerations of rigid rod packing imply that a domain of sufficiently short rods in a background membrane of long rods is more susceptible to twist than the inverse structure, a long-rod domain in a short-rod membrane background. The tilt at the inter-domain edge forces splay, which in turn manifests as a spontaneous edge curvature whose energetics are controlled by the length asymmetry of constituent rods. A thermodynamic model of such tilt-curvature coupling at inter-domain edges explains a number of experimental observations, including a non-monotonic dependence of the edge twist on the domain radius, and annularly shaped domains of long rods. Our work shows how coupling between orientational and compositional degrees of freedom in two-dimensional fluids give rise to complex shapes and thermodynamics of domains, analogous to shape transitions in 3D fluid vesicles. △ Less

Submitted 26 August, 2019; originally announced August 2019.

Comments: 36 pages, 8 figures

Topological surface states above the Fermi energy in $\textrm{Hf}_{2}\textrm{Te}_2\textrm{P}$

Authors: T. J. Boyle, A. Rossi, M. Walker, P. Carlson, M. K. Miller, J. Zhao, P. Klavins, C. Jozwiak, A. Bostwick, E. Rotenberg, V. Taufour, I. Vishik, E. H. da Silva Neto

Abstract: We report a detailed experimental study of the band structure of the recently discovered topological material $\textrm{Hf}_{2}\textrm{Te}_2\textrm{P}$. Using the combination of scanning tunneling spectroscopy and angle-resolved photo-emission spectroscopy with surface K-doping, we probe the band structure of $\textrm{Hf}_{2}\textrm{Te}_2\textrm{P}$ with energy and momentum resolution above the Fer… ▽ More We report a detailed experimental study of the band structure of the recently discovered topological material $\textrm{Hf}_{2}\textrm{Te}_2\textrm{P}$. Using the combination of scanning tunneling spectroscopy and angle-resolved photo-emission spectroscopy with surface K-doping, we probe the band structure of $\textrm{Hf}_{2}\textrm{Te}_2\textrm{P}$ with energy and momentum resolution above the Fermi level. Our experiments show the presence of multiple surface states with a linear Dirac-like dispersion, consistent with the predictions from previously reported band structure calculations. In particular, scanning tunneling spectroscopy measurements provide the first experimental evidence for the strong topological surface state predicted at 460 meV, which stems from the band inversion between Hf-d and Te-p orbitals. This band inversion comprised of more localized d-states could result in a better surface-to-bulk conductance ratio relative to more traditional topological insulators. △ Less

Submitted 15 May, 2019; originally announced May 2019.

Comments: Supplementary materials available upon request

Journal ref: Phys. Rev. B 100, 081105 (2019)

Conformational switching of chiral colloidal rafts regulates raft-raft attractions and repulsions

Authors: Joia Miller, Chaitanya Joshi, Prerna Sharma, Aparna Baskaran, Gregory M. Grason, Michael F. Hagan, Zvonimir Dogic

Abstract: Membrane-mediated particle interactions depend both on the properties of the particles themselves and the membrane environment in which they are suspended. Experiments have shown that chiral rod-like inclusions dissolved in a colloidal membrane of opposite handedness assemble into colloidal rafts, which are finite-sized reconfigurable droplets consisting of a large but precisely defined number of… ▽ More Membrane-mediated particle interactions depend both on the properties of the particles themselves and the membrane environment in which they are suspended. Experiments have shown that chiral rod-like inclusions dissolved in a colloidal membrane of opposite handedness assemble into colloidal rafts, which are finite-sized reconfigurable droplets consisting of a large but precisely defined number of rods. Here, we systematically tune the chirality of the background membrane, and find that in the achiral limit colloidal rafts acquire fundamentally new structural properties and interactions. In particular, rafts can switch between two chiral states of opposite handedness, which dramatically alters the nature of the membrane-mediated raft-raft interactions. Rafts with the same chirality have long-ranged repulsions, while those with opposite chirality acquire attractions with a well-defined minimum. Both attractive and repulsive interactions are explained by a continuum model that accounts for the coupling between the membrane thickness and the local tilt of the constituent rods. These switchable interactions enable assembly of colloidal rafts into intricate higher-order architectures with unusual symmetries, including stable tetrameric clusters and "ionic crystallites" of counter-twisting domains organized on a binary square lattice. Furthermore, the properties of individual rafts, such as their sizes, are controlled by their complexation with other rafts. The emergence of these complex behaviors can be rationalized purely in terms of generic couplings between compositional and orientational order of fluids of rod-like elements. Thus, the uncovered principles might have relevance for conventional lipid bilayers, in which the assembly of higher-order structures is also mediated by complex membrane-mediated interactions. △ Less

Submitted 8 February, 2019; originally announced February 2019.

Comments: Main text: 27 pages, 9 figures, Supplementary information: 11 pages, 3 figures

Ferroelectric switching of a two-dimensional metal

Authors: Zaiyao Fei, Wenjin Zhao, Tauno A. Palomaki, Bosong Sun, Moira K. Miller, Zhiying Zhao, Jiaqiang Yan, Xiaodong Xu, David H. Cobden

Abstract: A ferroelectric is a material with a polar structure whose polarity can be reversed by applying an electric field. In metals, the itinerant electrons tend to screen electrostatic forces between ions, helping to explain why polar metals are very rare. Screening also excludes external electric fields, apparently ruling out the possibility of polarity reversal and thus ferroelectric switching. In pri… ▽ More A ferroelectric is a material with a polar structure whose polarity can be reversed by applying an electric field. In metals, the itinerant electrons tend to screen electrostatic forces between ions, helping to explain why polar metals are very rare. Screening also excludes external electric fields, apparently ruling out the possibility of polarity reversal and thus ferroelectric switching. In principle, however, a thin enough polar metal could be penetrated by an electric field sufficiently to be switched. Here we show that the layered topological semimetal WTe2 provides the first embodiment of this principle. Although monolayer WTe2 is centrosymmetric and thus nonpolar, the stacked bulk structure is polar. We find that two- or three-layer WTe2 exhibits a spontaneous out-of-plane electric polarization which can be switched using gate electrodes. We directly detect and quantify the polarization using graphene as an electric field sensor. Moreover, the polarization states can be differentiated by conductivity, and the carrier density can be varied to modify the properties. The critical temperature is above 350 K, and even when WTe2 is sandwiched in graphene it retains its switching capability at room temperature, demonstrating a robustness suitable for applications in combination with other two-dimensional materials. △ Less

Submitted 12 September, 2018; originally announced September 2018.

Nucleation on a sphere: the roles of curvature, confinement and ensemble

Authors: Jack O. Law, Alex G. Wong, Halim Kusumatamja, Mark A. Miller

Abstract: By combining Monte Carlo simulations and analytical models, we demonstrate and explain how the gas-to-liquid phase transition of colloidal systems confined to a spherical surface depends on the curvature and size of the surface, and on the choice of thermodynamic ensemble. We find that the geometry of the surface affects the shape of the free energy profile and the size of the critical nucleus by… ▽ More By combining Monte Carlo simulations and analytical models, we demonstrate and explain how the gas-to-liquid phase transition of colloidal systems confined to a spherical surface depends on the curvature and size of the surface, and on the choice of thermodynamic ensemble. We find that the geometry of the surface affects the shape of the free energy profile and the size of the critical nucleus by altering the perimeter-area ratio of isotropic clusters. Confinement to a smaller spherical surface results in both a lower nucleation barrier and a smaller critical nucleus size. Furthermore, the liquid domain does not grow indefinitely on a sphere. Saturation of the liquid density in the grand canonical ensemble and the depletion of the gas phase in the canonical ensemble lead to a minimum in the free energy profile, with a sharp increase in free energy for additional growth beyond this minimum. △ Less

Submitted 2 June, 2018; v1 submitted 30 May, 2018; originally announced May 2018.

Comments: 13 pages, 7 figures 1 Revision: In the original arXive submission, Halim Kusumaatmaja's name has been mistakenly left out of the metadata

Continuum Percolation of Polydisperse Rods in Quadrupole Fields: Theory and Simulations

Authors: Shari P. Finner, Mihail I. Kotsev, Mark A. Miller, Paul van der Schoot

Abstract: We investigate percolation in mixtures of nanorods in the presence of external fields that align or disalign the particles with the field axis. Such conditions are found in the formulation and processing of nanocomposites, where the field may be electric, magnetic, or due to elongational flow. Our focus is on the effect of length polydispersity, which -- in the absence of a field -- is known to pr… ▽ More We investigate percolation in mixtures of nanorods in the presence of external fields that align or disalign the particles with the field axis. Such conditions are found in the formulation and processing of nanocomposites, where the field may be electric, magnetic, or due to elongational flow. Our focus is on the effect of length polydispersity, which -- in the absence of a field -- is known to produce a percolation threshold that scales with the inverse weight average of the particle length. Using a model of non-interacting spherocylinders in conjunction with connectedness percolation theory, we show that a quadrupolar field always increases the percolation threshold and that the universal scaling with the inverse weight average no longer holds if the field couples to the particle length. Instead, the percolation threshold becomes a function of higher moments of the length distribution, where the order of the relevant moments crucially depends on the strength and type of field applied. The theoretical predictions compare well with the results of our Monte Carlo simulations, which eliminate finite size effects by exploiting the fact that the universal scaling of the wrapping probability function holds even in anisotropic systems. Theory and simulation demonstrate that the percolation threshold of a polydisperse mixture can be lower than that of the individual components, confirming recent work based on a mapping onto a Bethe lattice as well as earlier computer simulations involving dipole fields. Our work shows how the formulation of nanocomposites may be used to compensate for the adverse effects of aligning fields that are inevitable under practical manufacturing conditions. △ Less

Submitted 3 January, 2018; originally announced January 2018.

Journal ref: J. Chem. Phys. 148 034903 (2018)

Design Strategies for Self-Assembly of Discrete Targets

Authors: Jim Madge, Mark A. Miller

Abstract: Both biological and artificial self-assembly processes can take place by a range of different schemes, from the successive addition of identical building blocks, to hierarchical sequences of intermediates, all the way to the fully addressable limit in which each component is unique. In this paper we introduce an idealized model of cubic particles with patterned faces that allows self-assembly stra… ▽ More Both biological and artificial self-assembly processes can take place by a range of different schemes, from the successive addition of identical building blocks, to hierarchical sequences of intermediates, all the way to the fully addressable limit in which each component is unique. In this paper we introduce an idealized model of cubic particles with patterned faces that allows self-assembly strategies to be compared and tested. We consider a simple octameric target, starting with the minimal requirements for successful self-assembly and comparing the benefits and limitations of more sophisticated hierarchical and addressable schemes. Simulations are performed using a hybrid dynamical Monte Carlo protocol that allows self-assembling clusters to rearrange internally while still providing Stokes-Einstein-like diffusion of aggregates of different sizes. Our simulations explicitly capture the thermodynamic, dynamic and steric challenges typically faced by self-assembly processes, including competition between multiple partially-completed structures. Self-assembly pathways are extracted from the simulation trajectories by a fully extendable scheme for identifying structural fragments, which are then assembled into history diagrams for successfully completed target structures. For the simple target, a one-component assembly scheme is most efficient and robust overall, but hierarchical and addressable strategies can have an advantage under some conditions if high yield is a priority. △ Less

Submitted 11 August, 2015; originally announced August 2015.

Comments: 15 pages, 15 figures

Journal ref: J. Chem. Phys. 143, 044905 (2015)

Transport in thin polarized Fermi-liquid films

Authors: David Z. Li, R. H. Anderson, M. D. Miller

Abstract: We calculate expressions for the state-dependent quasiparticle lifetime, the thermal conductivity $κ$, the shear viscosity $η$, and discuss the spin diffusion coefficient $D$ for Fermi-liquid films in two dimensions. The expressions are valid for low temperatures and arbitrary polarization. The low-temperature expressions for the transport coefficients are essentially exact. We find that… ▽ More We calculate expressions for the state-dependent quasiparticle lifetime, the thermal conductivity $κ$, the shear viscosity $η$, and discuss the spin diffusion coefficient $D$ for Fermi-liquid films in two dimensions. The expressions are valid for low temperatures and arbitrary polarization. The low-temperature expressions for the transport coefficients are essentially exact. We find that $κ^{-1} \sim T \ln{T}$, and $η^{-1} \sim T^{2}$ for arbitrary polarizations $0 \le {\mathcal{P}} \le 1$. We note that the shear viscosity requires a unique analysis. We utilize previously determined values for the density and polarization dependent Landau parameters to calculate the transition probabilities in the lowest order "$\ell = 0$ approximation," and thus we obtain predictions for the density, temperature and polarization dependence of the thermal conductivity, shear viscosity, and spin diffusion coefficient for thin \he3 films. Results are shown for second layer \he3 films on graphite, and thin \he3-\he4 superfluid mixtures. The density dependence is discussed in detail. For $κ$ and $η$ we find roughly an order of magnitude increase in magnitude from zero to full polarization. For $D$ a simialr large increase is predicted from zero polarization to the polarization where $D$ is a maximum ($\sim 0.74$). We discuss the applicability of \he3 thin films to the question of the existence of a universal lower bound for the ratio of the shear viscosity to the entropy density. △ Less

Submitted 9 July, 2015; originally announced July 2015.

Journal ref: Phys. Rev. B 92, 165130 (2015)

Percolation in suspensions of hard nanoparticles: From spheres to needles

Authors: Tanja Schilling, Mark Miller, Paul van der Schoot

Abstract: We investigate geometric percolation and scaling relations in suspensions of nanorods, covering the entire range of aspect ratios from spheres to extremely slender needles. A new version of connectedness percolation theory is introduced and tested against specialized Monte Carlo simulations. The theory accurately predicts percolation thresholds for aspect ratios as low as 10. The percolation thres… ▽ More We investigate geometric percolation and scaling relations in suspensions of nanorods, covering the entire range of aspect ratios from spheres to extremely slender needles. A new version of connectedness percolation theory is introduced and tested against specialized Monte Carlo simulations. The theory accurately predicts percolation thresholds for aspect ratios as low as 10. The percolation threshold for rod-like particles of aspect ratios below 1000 deviates significantly from the inverse aspect ratio scaling prediction, thought to be valid in the limit of infinitely slender rods and often used as a rule of thumb for nano-fibers in composite materials. Hence, most fibers that are currently used as fillers in composite materials cannot be regarded as practically infinitely slender for the purposes of percolation theory. Comparing percolation thresholds of hard rods and new benchmark results for ideal rods, we find that (i) for large aspect ratios, they differ by a factor that is inversely proportional to the connectivity distance between the hard cores, and (ii) they approach the slender rod limit differently. △ Less

Submitted 7 July, 2015; v1 submitted 28 May, 2015; originally announced May 2015.

The Role of Projection in the Control of Bird Flocks

Authors: Daniel J. G. Pearce, A. M. Miller, George Rowlands, Matthew S. Turner

Abstract: Swarming is a conspicuous behavioural trait observed in bird flocks, fish shoals, insect swarms and mammal herds. It is thought to improve collective awareness and offer protection from predators. Many current models involve the hypothesis that information coordinating motion is exchanged between neighbors. We argue that such local interactions alone are insufficient to explain the organization of… ▽ More Swarming is a conspicuous behavioural trait observed in bird flocks, fish shoals, insect swarms and mammal herds. It is thought to improve collective awareness and offer protection from predators. Many current models involve the hypothesis that information coordinating motion is exchanged between neighbors. We argue that such local interactions alone are insufficient to explain the organization of large flocks of birds and that the mechanism for the exchange of long-ranged information necessary to control their density remains unknown. We show that large flocks self-organize to the maximum density at which a typical individual is still just able to see out of the flock in many directions. Such flocks are marginally opaque - an external observer can also just still see a substantial fraction of sky through the flock. Although seemingly intuitive we show that this need not be the case; flocks could easily be highly diffuse or entirely opaque. The emergence of marginal opacity strongly constrains how individuals interact with each other within large swarms. It also provides a mechanism for global interactions: An individual can respond to the projection of the flock that it sees. This provides for faster information transfer and hence rapid flock dynamics, another advantage over local models. From a behavioural perspective it optimizes the information available to each bird while maintaining the protection of a dense, coherent flock. △ Less

Submitted 9 July, 2014; originally announced July 2014.

Comments: PNAS early edition published online at http://www.pnas.org/cgi/doi/10.1073/pnas.1402202111

Competing solutions of Landau's kinetic equation for zero sound and first sound in thin arbitrarily polarized Fermi-liquid films

Authors: David Z. Li, R. H. Anderson, M. D. Miller, Ethan Crowell

Abstract: We examine in detail the method introduced by Sanchez-Castro, Bedell, and Wiegers (SBW) to solve Landau's linearized kinetic equation, and compare it with the well-known standard method introduced by Abrikosov and Khalatnikov (AK). The SBW approach, hardly known, differs from AK in the way that moments are taken with respect to the angular functions of the Fourier transformed kinetic equation. We… ▽ More We examine in detail the method introduced by Sanchez-Castro, Bedell, and Wiegers (SBW) to solve Landau's linearized kinetic equation, and compare it with the well-known standard method introduced by Abrikosov and Khalatnikov (AK). The SBW approach, hardly known, differs from AK in the way that moments are taken with respect to the angular functions of the Fourier transformed kinetic equation. We compare the SBW and AK solutions for zero-sound and first-sound propagation speeds and attenuation both analytically in the zero and full polarization limits, and numerically at arbitrary polarization using Landau parameters appropriate for thin $^{3}$He films. We find that the lesser known method not only yields results in close agreement with the standard method, but in most cases does so with far less analytic and computational △ Less

Submitted 3 March, 2014; originally announced March 2014.

Depletion interaction effects on the tunneling conductivity of nanorod suspensions

Authors: B. Nigro, C. Grimaldi, M. A. Miller, P. Ryser, T. Schilling

Abstract: We study by simulation and theory how the addition of insulating spherical particles affects the conductivity of fluids of conducting rods, modeled by spherocylinders. The electrical connections are implemented as tunneling processes, leading to a more detailed and realistic description than a discontinuous percolation approach. We find that the spheres enhance the tunneling conductivity for a giv… ▽ More We study by simulation and theory how the addition of insulating spherical particles affects the conductivity of fluids of conducting rods, modeled by spherocylinders. The electrical connections are implemented as tunneling processes, leading to a more detailed and realistic description than a discontinuous percolation approach. We find that the spheres enhance the tunneling conductivity for a given concentration of rods and that the enhancement increases with rod concentration into the regime where the conducting network is well established. By reformulating the network of rods using a critical path analysis, we quantify the effect of depletion-induced attraction between the rods due to the spheres. Furthermore, we show that our conductivity data are quantitatively reproduced by an effective medium approximation, which explicitly relates the system tunneling conductance to the structure of the rod-sphere fluid. △ Less

Submitted 28 October, 2013; originally announced October 2013.

Comments: 8 pages, 8 figures

Journal ref: Phys. Rev. E 88, 042140 (2013)

Energy landscapes, structural topologies and rearrangement mechanisms in clusters of dipolar particles

Authors: James D. Farrell, Christabel Lines, James J. Shepherd, Dwaipayan Chakrabarti, Mark A. Miller, David J. Wales

Abstract: Clusters of spherical particles with isotropic attraction favour compact structures that maximise the number of energetically optimal nearest-neighbour interactions. In contrast, dipolar interactions lead to the formation of chains with a low coordination number. When both isotropic and dipolar interactions are present, the competition between them can lead to intricate knot, link and coil structu… ▽ More Clusters of spherical particles with isotropic attraction favour compact structures that maximise the number of energetically optimal nearest-neighbour interactions. In contrast, dipolar interactions lead to the formation of chains with a low coordination number. When both isotropic and dipolar interactions are present, the competition between them can lead to intricate knot, link and coil structures. Here, we investigate how these structures may self-organise and interconvert in clusters bound by the Stockmayer potential (Lennard-Jones plus point dipole). We map out the low-lying region of the energy landscape using disconnectivity graphs to follow how it evolves as the strength of the dipolar interactions increases. From comprehensive surveys of isomerisation pathways, we identify a number of rearrangement mechanisms that allow the topology of chain-like structures to interconvert. △ Less

Submitted 29 April, 2013; originally announced April 2013.

Comments: 11 pages, 9 figures

Journal ref: Soft Matter 9, 5407 (2013)

Structure and stability of charged clusters

Authors: Mark A. Miller, David A. Bonhommeau, Christopher J. Heard, Yuyoung Shin, Riccardo Spezia, Marie-Pierre Gaigeot

Abstract: When a cluster or nanodroplet bears charge, its structure and thermodynamics are altered and, if the charge exceeds a certain limit, the system becomes unstable with respect to fragmentation. Some of the key results in this area were derived by Rayleigh in the nineteenth century using a continuum model of liquid droplets. Here we revisit the topic using a simple particle-based description, present… ▽ More When a cluster or nanodroplet bears charge, its structure and thermodynamics are altered and, if the charge exceeds a certain limit, the system becomes unstable with respect to fragmentation. Some of the key results in this area were derived by Rayleigh in the nineteenth century using a continuum model of liquid droplets. Here we revisit the topic using a simple particle-based description, presenting a systematic case study of how charge affects the physical properties of a Lennard-Jones cluster composed of 309 particles. We find that the ability of the cluster to sustain charge depends on the number of particles over which the charge is distributed---a parameter not included in Rayleigh's analysis. Furthermore, the cluster may fragment before the charge is strong enough to drive all charged particles to the surface. The charged particles in stable clusters are therefore likely to reside in the cluster's interior even without considering solvation effects. △ Less

Submitted 15 May, 2012; originally announced May 2012.

Comments: 15 pages, 6 figures

Controlling the folding and substrate-binding of proteins using polymer brushes

Authors: Brenda M. Rubenstein, Ivan Coluzza, Mark A. Miller

Abstract: The extent of coupling between the folding of a protein and its binding to a substrate varies from protein to protein. Some proteins have highly structured native states in solution, while others are natively disordered and only fold fully upon binding. In this Letter, we use Monte Carlo simulations to investigate how disordered polymer chains grafted around a binding site affect the folding and b… ▽ More The extent of coupling between the folding of a protein and its binding to a substrate varies from protein to protein. Some proteins have highly structured native states in solution, while others are natively disordered and only fold fully upon binding. In this Letter, we use Monte Carlo simulations to investigate how disordered polymer chains grafted around a binding site affect the folding and binding of three model proteins. The protein that approaches the substrate fully folded is more hindered during the binding process than those whose folding and binding are cooperative. The polymer chains act as localized crowding agents and can select correctly folded and bound configurations in favor of non-specifically adsorbed states. The free energy change for forming all intra-protein and protein-substrate contacts can depend non-monotonically on the polymer length. △ Less

Submitted 27 April, 2012; originally announced April 2012.

Comments: 5 pages, 5 figures, 1 table

Journal ref: Physical Review Letters 108 208104 (2012)

Density functional theory for Baxter's sticky hard spheres in confinement

Authors: Hendrik Hansen-Goos, Mark A. Miller, J. S. Wettlaufer

Abstract: It has recently been shown that a free energy for Baxter's sticky hard sphere fluid is uniquely defined within the framework of fundamental measure theory (FMT) for the inhomogeneous hard sphere fluid, provided that it obeys scaled-particle theory and the Percus-Yevick (PY) result for the direct correlation function [Hansen-Goos and Wettlaufer, J. Chem. Phys. {\bf 134}, 014506 (2011)]. Here, combi… ▽ More It has recently been shown that a free energy for Baxter's sticky hard sphere fluid is uniquely defined within the framework of fundamental measure theory (FMT) for the inhomogeneous hard sphere fluid, provided that it obeys scaled-particle theory and the Percus-Yevick (PY) result for the direct correlation function [Hansen-Goos and Wettlaufer, J. Chem. Phys. {\bf 134}, 014506 (2011)]. Here, combining weighted densities from common versions of FMT with a new vectorial weighted density, we derive a regularization of the divergences of the associated strongly confined limit. Moreover, the simple free energy that emerges is exact in the zero-dimensional limit, leaves the underlying equation of state unaffected, and yields a direct correlation function distinct from the PY expression. Comparison with simulation data for both the bulk pair correlation function and the density profiles in confinement shows that the new theory is significantly more accurate than the PY-based results. Finally, the resulting free energy is applicable to a glass of adhesive hard spheres. △ Less

Submitted 15 December, 2011; originally announced December 2011.

Comments: 5 pages, 4 figures; accepted for publication in Phys. Rev. Lett

Tunneling conductivity in composites of attractive colloids

Authors: B. Nigro, C. Grimaldi, M. A. Miller, P. Ryser, T. Schilling

Abstract: In conductor-insulator nanocomposites in which conducting fillers are dispersed in an insulating matrix the electrical connectedness is established by interparticle tunneling or hopping processes. These systems are intrinsically non-percolative and a coherent description of the functional dependence of the conductivity $σ$ on the filler properties, and in particular of the conductor-insulator tran… ▽ More In conductor-insulator nanocomposites in which conducting fillers are dispersed in an insulating matrix the electrical connectedness is established by interparticle tunneling or hopping processes. These systems are intrinsically non-percolative and a coherent description of the functional dependence of the conductivity $σ$ on the filler properties, and in particular of the conductor-insulator transition, requires going beyond the usual continuum percolation approach by relaxing the constraint of a fixed connectivity distance. In this article we consider dispersions of conducting spherical particles which are connected to all others by tunneling conductances and which are subjected to an effective attractive square well potential. We show that the conductor-insulator transition at low contents $φ$ of the conducting fillers does not determine the behavior of $σ$ at larger concentrations, in striking contrast to what is predicted by percolation theory. In particular, we find that at low $φ$ the conductivity is governed almost entirely by the stickiness of the attraction, while at larger $φ$ values $σ$ depends mainly on the depth of the potential well. As a consequence, by varying the range and depth of the potential while keeping the stickiness fixed, composites with similar conductor-insulator transitions may display conductivity variations of several orders of magnitude at intermediate and large $φ$ values. By using a recently developed effective medium theory and the critical path approximation we explain this behavior in terms of dominant tunneling processes which involve interparticle distances spanning different regions of the square-well fluid structure as $φ$ is varied. Our predictions could be tested in experiments by changing the potential profile with different depletants in polymer nanocomposites. △ Less

Submitted 26 April, 2012; v1 submitted 25 September, 2011; originally announced September 2011.

Comments: 10 pages, 8 figures

Journal ref: J. Chem. Phys. 136, 164903 (2012)

Atom chips on direct bonded copper substrates

Authors: Matthew B. Squires, James A. Stickney, Evan J. Carlson, Paul M. Baker, Walter R. Buchwald, Sandra Wentzell, Steven M. Miller

Abstract: We present the use of direct bonded copper (DBC) for the straightforward fabrication of high power atom chips. Atom chips using DBC have several benefits: excellent copper/substrate adhesion, high purity, thick (> 100 microns) copper layers, high substrate thermal conductivity, high aspect ratio wires, the potential for rapid (< 8 hr) fabrication, and three dimensional atom chip structures. Two ma… ▽ More We present the use of direct bonded copper (DBC) for the straightforward fabrication of high power atom chips. Atom chips using DBC have several benefits: excellent copper/substrate adhesion, high purity, thick (> 100 microns) copper layers, high substrate thermal conductivity, high aspect ratio wires, the potential for rapid (< 8 hr) fabrication, and three dimensional atom chip structures. Two mask options for DBC atom chip fabrication are presented, as well as two methods for etching wire patterns into the copper layer. The wire aspect ratio that optimizes the magnetic field gradient as a function of power dissipation is determined to be 0.84:1 (height:width). The optimal wire thickness as a function of magnetic trapping height is also determined. A test chip, able to support 100 A of current for 2 s without failing, is used to determine the thermal impedance of the DBC. An assembly using two DBC atom chips to provide magnetic confinement is also shown. △ Less

Submitted 27 July, 2010; originally announced July 2010.

Comments: 8 pages, 5 figures

Structural trends in clusters of quadrupolar spheres

Authors: Mark A. Miller, James J. Shepherd, David J. Wales

Abstract: The influence of quadrupolar interactions on the structure of small clusters is investigated by adding a point quadrupole of variable strength to the Lennard-Jones potential. Competition arises between sheet-like arrangements of the particles, favoured by the quadrupoles, and compact structures, favoured by the isotropic Lennard-Jones attraction. Putative global potential energy minima are obtai… ▽ More The influence of quadrupolar interactions on the structure of small clusters is investigated by adding a point quadrupole of variable strength to the Lennard-Jones potential. Competition arises between sheet-like arrangements of the particles, favoured by the quadrupoles, and compact structures, favoured by the isotropic Lennard-Jones attraction. Putative global potential energy minima are obtained for clusters of up to 25 particles using the basin-hopping algorithm. A number of structural motifs and growth sequences emerge, including star-like structures, tubes, shells and sheets. The results are discussed in the context of colloidal self-assembly. △ Less

Submitted 16 June, 2008; originally announced June 2008.

Comments: 8 pages, 6 figures

Journal ref: Molecular Physics, vol.106, pages 1655-1664 (2008)

The vanishing limit of the square-well fluid: the adhesive hard sphere model as a reference system

Authors: J. Largo, M. A. Miller, F. Sciortino

Abstract: We report a simulation study of the gas-liquid critical point for the square-well potential, for values of well width delta as small as 0.005 times the particle diameter sigma. For small delta, the reduced second virial coefficient at the critical point B_2*c is found to depend linearly on delta. The observed weak linear dependence is not sufficient to produce any significant observable effect i… ▽ More We report a simulation study of the gas-liquid critical point for the square-well potential, for values of well width delta as small as 0.005 times the particle diameter sigma. For small delta, the reduced second virial coefficient at the critical point B_2*c is found to depend linearly on delta. The observed weak linear dependence is not sufficient to produce any significant observable effect if the critical temperature T_c is estimated via a constant B_2*c assumption, due to the highly non linear transformation between B_2*c and T_c. This explains the previously observed validity of the law of corresponding states. The critical density rho_c is also found to be constant when measured in units of the cubed average distance between two bonded particles (1+0.5 delta)/sigma. The possibility of describing the delta -> 0 dependence with precise functional forms provides improved acccurate estimates of the critical parameters of the adhesive hard-sphere AHS model. △ Less

Submitted 18 December, 2007; originally announced December 2007.

Comments: 14 pages, 4 figures, 2 tables

Magnetic and orbital ordering in the spinel MnV2O4

Authors: V. O. Garlea, R. Jin, D. Mandrus, B. Roessli, Q. Huang, M. Miller, A. J. Schultz, S. E. Nagler

Abstract: Neutron inelastic scattering and diffraction techniques have been used to study the MnV2O4 spinel system. Our measurements show the existence of two transitions to long-range ordered ferrimagnetic states; the first collinear and the second noncollinear. The lower temperature transition, characterized by development of antiferromagnetic components in the basal plane, is accompanied by a tetragona… ▽ More Neutron inelastic scattering and diffraction techniques have been used to study the MnV2O4 spinel system. Our measurements show the existence of two transitions to long-range ordered ferrimagnetic states; the first collinear and the second noncollinear. The lower temperature transition, characterized by development of antiferromagnetic components in the basal plane, is accompanied by a tetragonal distortion and the appearance of a gap in the magnetic excitation spectrum. The low-temperature noncollinear magnetic structure has been definitively resolved. Taken together, the crystal and magnetic structures indicate a staggered ordering of the V d orbitals. The anisotropy gap is a consequence of unquenched V orbital angular momentum. △ Less

Submitted 12 November, 2007; originally announced November 2007.

Importance of Metastable States in the Free Energy Landscapes of Polypeptide Chains

Authors: Stefan Auer, Mark A. Miller, Sergei V. Krivov, Christopher M. Dobson, Martin Karplus, Michele Vendruscolo

Abstract: We show that the interplay between excluded volume effects, hydrophobicity, and hydrogen bonding of a tube-like representation of a polypeptide chain gives rise to free energy landscapes that exhibit a small number of metastable minima corresponding to common structural motifs observed in proteins. The complexity of the landscape increases only moderately with the length of the chain. Analysis o… ▽ More We show that the interplay between excluded volume effects, hydrophobicity, and hydrogen bonding of a tube-like representation of a polypeptide chain gives rise to free energy landscapes that exhibit a small number of metastable minima corresponding to common structural motifs observed in proteins. The complexity of the landscape increases only moderately with the length of the chain. Analysis of the temperature dependence of these landscapes reveals that the stability of specific metastable states is maximal at a temperature close to the mid-point of folding. These mestastable states are therefore likely to be of particular significance in determining the generic tendency of proteins to aggregate into potentially pathogenic agents. △ Less

Submitted 18 October, 2007; originally announced October 2007.

Comments: 4 pages, 3 figures

Journal ref: Physical Review Letters, 99 178104 (2007)

Patchy sticky hard spheres: analytical study and Monte Carlo simulations

Authors: Riccardo Fantoni, Domenico Gazzillo, Achille Giacometti, Mark A. Miller, Giorgio Pastore

Abstract: We consider a fluid of hard spheres bearing one or two uniform circular adhesive patches, distributed so as not to overlap. Two spheres interact via a ``sticky'' Baxter potential if the line joining the centers of the two spheres intersects a patch on each sphere, and via a hard sphere potential otherwise. We analyze the location of the fluid-fluid transition and of the percolation line as a fun… ▽ More We consider a fluid of hard spheres bearing one or two uniform circular adhesive patches, distributed so as not to overlap. Two spheres interact via a ``sticky'' Baxter potential if the line joining the centers of the two spheres intersects a patch on each sphere, and via a hard sphere potential otherwise. We analyze the location of the fluid-fluid transition and of the percolation line as a function of the size of the patch (the fractional coverage of the sphere's surface) and of the number of patches within a virial expansion up to third order and within the first two terms (C0 and C1) of a class of closures Cn hinging on a density expansion of the direct correlation function. We find that the locations of the two lines depend sensitively on both the total adhesive coverage and its distribution. The treatment is almost fully analytical within the chosen approximate theory. We test our findings by means of specialized Monte Carlo (MC) simulations and find the main qualitative features of the critical behaviour to be well captured in spite of the low density perturbative nature of the closure. The introduction of anisotropic attractions into a model suspension of spherical particles is a first step towards a more realistic description of globular proteins in solution. △ Less

Submitted 11 October, 2007; originally announced October 2007.

Comments: 47 pages, 18 figures, to appear on J. Chem. Phys

Reversible gelation and dynamical arrest of dipolar colloids

Authors: Ronald Blaak, Mark A. Miller, Jean-Pierre Hansen

Abstract: We use molecular dynamics simulations of a simple model to show that dispersions of slightly elongated colloidal particles with long-range dipolar interactions, like ferrofluids, can form a physical (reversible) gel at low volume fractions. On cooling, the particles first self-assemble into a transient percolating network of cross-linked chains, which, at much lower temperatures, then undergoes… ▽ More We use molecular dynamics simulations of a simple model to show that dispersions of slightly elongated colloidal particles with long-range dipolar interactions, like ferrofluids, can form a physical (reversible) gel at low volume fractions. On cooling, the particles first self-assemble into a transient percolating network of cross-linked chains, which, at much lower temperatures, then undergoes a kinetic transition to a dynamically arrested state with broken ergodicity. This transition from a transient to a frozen gel is characterised by dynamical signatures reminiscent of jamming in much denser dispersions. △ Less

Submitted 6 March, 2007; originally announced March 2007.

Comments: 6 pages, 7 figures

Journal ref: Europhysics Letters 78, 26002 (2007)

Depletion-induced percolation in networks of nanorods

Authors: T. Schilling, S. Jungblut, Mark A. Miller

Abstract: Above a certain density threshold, suspensions of rod-like colloidal particles form system-spanning networks. Using Monte Carlo simulations, we investigate how the depletion forces caused by spherical particles affect these networks in isotropic suspensions of rods. Although the depletion forces are strongly anisotropic and favor alignment of the rods, the percolation threshold of the rods decre… ▽ More Above a certain density threshold, suspensions of rod-like colloidal particles form system-spanning networks. Using Monte Carlo simulations, we investigate how the depletion forces caused by spherical particles affect these networks in isotropic suspensions of rods. Although the depletion forces are strongly anisotropic and favor alignment of the rods, the percolation threshold of the rods decreases significantly. The relative size of the effect increases with the aspect ratio of the rods. The structural changes induced in the suspension by the depletant are characterized in detail and the system is compared to an ideal fluid of freely interpenetrable rods. △ Less

Submitted 23 August, 2006; originally announced August 2006.

Comments: 4 pages, 3 figures

Journal ref: Physical Review Letters, 98 108303 (2007)

Reversible self-assembly of patchy particles into monodisperse icosahedral clusters

Authors: Alex W. Wilber, Jonathan P. K. Doye, Ard A. Louis, Eva G. Noya, Mark A. Miller, Pauline Wong

Abstract: We systematically study the design of simple patchy sphere models that reversibly self-assemble into monodisperse icosahedral clusters. We find that the optimal patch width is a compromise between structural specificity (the patches must be narrow enough to energetically select the desired clusters) and kinetic accessibility (they must be sufficiently wide to avoid kinetic traps). Similarly, for… ▽ More We systematically study the design of simple patchy sphere models that reversibly self-assemble into monodisperse icosahedral clusters. We find that the optimal patch width is a compromise between structural specificity (the patches must be narrow enough to energetically select the desired clusters) and kinetic accessibility (they must be sufficiently wide to avoid kinetic traps). Similarly, for good yields the temperature must be low enough for the clusters to be thermodynamically stable, but the clusters must also have enough thermal energy to allow incorrectly formed bonds to be broken. Ordered clusters can form through a number of different dynamic pathways, including direct nucleation and indirect pathways involving large disordered intermediates. The latter pathway is related to a reentrant liquid-to-gas transition that occurs for intermediate patch widths upon lowering the temperature. We also find that the assembly process is robust to inaccurate patch placement up to a certain threshold, and that it is possible to replace the five discrete patches with a single ring patch with no significant loss in yield. △ Less

Submitted 26 April, 2007; v1 submitted 25 June, 2006; originally announced June 2006.

Comments: 12 pages, 12 figures

Journal ref: J. Chem. Phys. 127, 085106 (2007)

Delayed Feedback and Chaos on the Driven Diode-Terminated Transmission Line

Authors: Vassili Demergis, Alexander Glasser, Marshal Miller, Thomas M. Antonsen Jr., Edward Ott, Steven M. Anlage

Abstract: A simple model of a distributed, non-linear circuit that produces chaos at GHz frequencies is introduced and tested experimentally. The model circuit is a driven diode-terminated transmission line with the transmission line impedance mismatched to that of the source. Experiments were performed with sinusoidal driving frequencies of 10 MHz to 1.2 GHz, driving powers of -30 to +50 dBm and transmis… ▽ More A simple model of a distributed, non-linear circuit that produces chaos at GHz frequencies is introduced and tested experimentally. The model circuit is a driven diode-terminated transmission line with the transmission line impedance mismatched to that of the source. Experiments were performed with sinusoidal driving frequencies of 10 MHz to 1.2 GHz, driving powers of -30 to +50 dBm and transmission line delay times from 3 to 20 ns. Diode reverse recovery times ranged from 4 to 100 ns. As a result of many experiments, it was found that chaotic behavior was strongly dependent on the unbiased, small-signal reactance of the system as seen by the driving source, and influenced by an applied DC voltage-bias across the diode. In the experiments that showed period-doubling and / or chaos, the reverse recovery times of the diodes were on the order of both the driving period and the delay time of the circuits. Comparisons between theory and experiment are in general agreement. Chaos produced with a driving frequency of 1.105 GHz has been observed experimentally. △ Less

Submitted 18 May, 2006; originally announced May 2006.

Comments: 9 pages, 8 figures