Showing 1–16 of 16 results for author: Mianroodi, J R

A physics-encoded Fourier neural operator approach for surrogate modeling of divergence-free stress fields in solids

Authors: Mohammad S. Khorrami, Pawan Goyal, Jaber R. Mianroodi, Bob Svendsen, Peter Benner, Dierk Raabe

Abstract: The purpose of the current work is the development of a so-called physics-encoded Fourier neural operator (PeFNO) for surrogate modeling of the quasi-static equilibrium stress field in solids. Rather than accounting for constraints from physics in the loss function as done in the (now standard) physics-informed approach, the physics-encoded approach incorporates or "encodes" such constraints direc… ▽ More The purpose of the current work is the development of a so-called physics-encoded Fourier neural operator (PeFNO) for surrogate modeling of the quasi-static equilibrium stress field in solids. Rather than accounting for constraints from physics in the loss function as done in the (now standard) physics-informed approach, the physics-encoded approach incorporates or "encodes" such constraints directly into the network or operator architecture. As a result, in contrast to the physics-informed approach in which only training is physically constrained, both training and output are physically constrained in the physics-encoded approach. For the current constraint of divergence-free stress, a novel encoding approach based on a stress potential is proposed. As a "proof-of-concept" example application of the proposed PeFNO, a heterogeneous polycrystalline material consisting of isotropic elastic grains subject to uniaxial extension is considered. Stress field data for training are obtained from the numerical solution of a corresponding boundary-value problem for quasi-static mechanical equilibrium. This data is also employed to train an analogous physics-guided FNO (PgFNO) and physics-informed FNO (PiFNO) for comparison. As confirmed by this comparison and as expected on the basis of their differences, the output of the trained PeFNO is significantly more accurate in satisfying mechanical equilibrium than the output of either the trained PgFNO or the trained PiFNO. △ Less

Submitted 4 February, 2025; v1 submitted 27 August, 2024; originally announced August 2024.

Comments: 17 pages, 11 figures

Roadmap on Data-Centric Materials Science

Authors: Stefan Bauer, Peter Benner, Tristan Bereau, Volker Blum, Mario Boley, Christian Carbogno, C. Richard A. Catlow, Gerhard Dehm, Sebastian Eibl, Ralph Ernstorfer, Ádám Fekete, Lucas Foppa, Peter Fratzl, Christoph Freysoldt, Baptiste Gault, Luca M. Ghiringhelli, Sajal K. Giri, Anton Gladyshev, Pawan Goyal, Jason Hattrick-Simpers, Lara Kabalan, Petr Karpov, Mohammad S. Khorrami, Christoph Koch, Sebastian Kokott , et al. (36 additional authors not shown)

Abstract: Science is and always has been based on data, but the terms "data-centric" and the "4th paradigm of" materials research indicate a radical change in how information is retrieved, handled and research is performed. It signifies a transformative shift towards managing vast data collections, digital repositories, and innovative data analytics methods. The integration of Artificial Intelligence (AI) a… ▽ More Science is and always has been based on data, but the terms "data-centric" and the "4th paradigm of" materials research indicate a radical change in how information is retrieved, handled and research is performed. It signifies a transformative shift towards managing vast data collections, digital repositories, and innovative data analytics methods. The integration of Artificial Intelligence (AI) and its subset Machine Learning (ML), has become pivotal in addressing all these challenges. This Roadmap on Data-Centric Materials Science explores fundamental concepts and methodologies, illustrating diverse applications in electronic-structure theory, soft matter theory, microstructure research, and experimental techniques like photoemission, atom probe tomography, and electron microscopy. While the roadmap delves into specific areas within the broad interdisciplinary field of materials science, the provided examples elucidate key concepts applicable to a wider range of topics. The discussed instances offer insights into addressing the multifaceted challenges encountered in contemporary materials research. △ Less

Submitted 1 May, 2024; v1 submitted 1 February, 2024; originally announced February 2024.

Comments: Review, outlook, roadmap, perspective

Comparison of two artificial neural networks trained for the surrogate modeling of stress in materially heterogeneous elastoplastic solids

Authors: Sarthak Kapoor, Jaber Rezaei Mianroodi, Mohammad Khorrami, Nima S. Siboni, Bob Svendsen

Abstract: The purpose of this work is the systematic comparison of the application of two artificial neural networks (ANNs) to the surrogate modeling of the stress field in materially heterogeneous periodic polycrystalline microstructures. The first ANN is a UNet-based convolutional neural network (CNN) for periodic data, and the second is based on Fourier neural operators (FNO). Both of these were trained,… ▽ More The purpose of this work is the systematic comparison of the application of two artificial neural networks (ANNs) to the surrogate modeling of the stress field in materially heterogeneous periodic polycrystalline microstructures. The first ANN is a UNet-based convolutional neural network (CNN) for periodic data, and the second is based on Fourier neural operators (FNO). Both of these were trained, validated, and tested with results from the numerical solution of the boundary-value problem (BVP) for quasi-static mechanical equilibrium in periodic grain microstructures with square domains. More specifically, these ANNs were trained to correlate the spatial distribution of material properties with the equilibrium stress field under uniaxial tensile loading. The resulting trained ANNs (tANNs) calculate the stress field for a given microstructure on the order of 1000 (UNet) to 2500 (FNO) times faster than the numerical solution of the corresponding BVP. For microstructures in the test dataset, the FNO-based tANN, or simply FNO, is more accurate than its UNet-based counterpart; the normalized mean absolute error of different stress components for the former is 0.25-0.40% as compared to 1.41-2.15% for the latter. Errors in FNO are restricted to grain boundary regions, whereas the error in U-Net also comes from within the grain. In comparison to U-Net, errors in FNO are more robust to large variations in spatial resolution as well as small variations in grain density. On other hand, errors in U-Net are robust to variations in boundary box aspect ratio, whereas errors in FNO increase as the domain becomes rectangular. Both tANNs are however unable to reproduce strong stress gradients, especially around regions of stress concentration. △ Less

Submitted 30 October, 2022; originally announced October 2022.

Comments: 13 pages, 9 figures

Computational Discovery of Energy-Efficient Heat Treatment for Microstructure Design using Deep Reinforcement Learning

Authors: Jaber R. Mianroodi, Nima H. Siboni, Dierk Raabe

Abstract: Deep Reinforcement Learning (DRL) is employed to develop autonomously optimized and custom-designed heat-treatment processes that are both, microstructure-sensitive and energy efficient. Different from conventional supervised machine learning, DRL does not rely on static neural network training from data alone, but a learning agent autonomously develops optimal solutions, based on reward and penal… ▽ More Deep Reinforcement Learning (DRL) is employed to develop autonomously optimized and custom-designed heat-treatment processes that are both, microstructure-sensitive and energy efficient. Different from conventional supervised machine learning, DRL does not rely on static neural network training from data alone, but a learning agent autonomously develops optimal solutions, based on reward and penalty elements, with reduced or no supervision. In our approach, a temperature-dependent Allen-Cahn model for phase transformation is used as the environment for the DRL agent, serving as the model world in which it gains experience and takes autonomous decisions. The agent of the DRL algorithm is controlling the temperature of the system, as a model furnace for heat-treatment of alloys. Microstructure goals are defined for the agent based on the desired microstructure of the phases. After training, the agent can generate temperature-time profiles for a variety of initial microstructure states to reach the final desired microstructure state. The agent's performance and the physical meaning of the heat-treatment profiles generated are investigated in detail. In particular, the agent is capable of controlling the temperature to reach the desired microstructure starting from a variety of initial conditions. This capability of the agent in handling a variety of conditions paves the way for using such an approach also for recycling-oriented heat treatment process design where the initial composition can vary from batch to batch, due to impurity intrusion, and also for the design of energy-efficient heat treatments. For testing this hypothesis, an agent without penalty on the total consumed energy is compared with one that considers energy costs. The energy cost penalty is imposed as an additional criterion on the agent for finding the optimal temperature-time profile. △ Less

Submitted 22 September, 2022; originally announced September 2022.

Effect of Pore Formation on Redox-Driven Phase Transformation

Authors: Xuyang Zhou, Yang Bai, Ayman A. El-Zoka, Se-Ho Kim, Yan Ma, Christian H. Liebscher, Baptiste Gault, Jaber R. Mianroodi, Gerhard Dehm, Dierk Raabe

Abstract: When solid-state redox-driven phase transformations are associated with mass loss, vacancies are produced that develop into pores. These pores can influence the kinetics of certain redox and phase transformation steps. We investigated the structural and chemical mechanisms in and at pores in a combined experimental-theoretical study, using the reduction of iron oxide by hydrogen as a model system.… ▽ More When solid-state redox-driven phase transformations are associated with mass loss, vacancies are produced that develop into pores. These pores can influence the kinetics of certain redox and phase transformation steps. We investigated the structural and chemical mechanisms in and at pores in a combined experimental-theoretical study, using the reduction of iron oxide by hydrogen as a model system. The redox product (water) accumulates inside the pores and shifts the local equilibrium at the already reduced material back towards re-oxidation into cubic-Fe1-xO (where x refers to Fe deficiency, space group Fm3-m). This effect helps to understand the sluggish reduction of cubic-Fe1-xO by hydrogen, a key process for future sustainable steelmaking. △ Less

Submitted 6 March, 2023; v1 submitted 19 September, 2022; originally announced September 2022.

An artificial neural network for surrogate modeling of stress fields in viscoplastic polycrystalline materials

Authors: Mohammad S. Khorrami, Jaber R. Mianroodi, Nima H. Siboni, Pawan Goyal, Bob Svendsen, Peter Benner, Dierk Raabe

Abstract: The purpose of this work is the development of an artificial neural network (ANN) for surrogate modeling of the mechanical response of viscoplastic grain microstructures. To this end, a U-Net-based convolutional neural network (CNN) is trained to account for the history dependence of the material behavior. The training data take the form of numerical simulation results for the von Mises stress fie… ▽ More The purpose of this work is the development of an artificial neural network (ANN) for surrogate modeling of the mechanical response of viscoplastic grain microstructures. To this end, a U-Net-based convolutional neural network (CNN) is trained to account for the history dependence of the material behavior. The training data take the form of numerical simulation results for the von Mises stress field under quasi-static tensile loading. The trained CNN (tCNN) can accurately reproduce both the average response as well as the local von Mises stress field. The tCNN calculates the von Mises stress field of grain microstructures not included in the training dataset about 500 times faster than its calculation based on the numerical solution with a spectral solver of the corresponding initial-boundary-value problem. The tCNN is also successfully applied to other types of microstructure morphologies (e.g., matrix-inclusion type topologies) and loading levels not contained in the training dataset. △ Less

Submitted 29 August, 2022; originally announced August 2022.

Combined modeling and experimental characterization of Mn segregation and spinodal decomposition along dislocation lines in Fe-Mn alloys

Authors: Jaber Rezaei Mianroodi, Pratheek Shanthraj, Alisson Kwiatkowski da Silva, Bob Svendsen, Dierk Raabe

Abstract: Mn enrichment at dislocations in Fe-Mn alloys due to segregation and spinodal decomposition along the dislocation line is studied via modeling and experimental characterization. To model these phenomena, both finite-deformation microscopic phase-field chemomechanics (MPFCM) and Monte Carlo molecular dynamics (MCMD) are employed. MPFCM calibration is carried out with the same Fe-Mn MEAM-based poten… ▽ More Mn enrichment at dislocations in Fe-Mn alloys due to segregation and spinodal decomposition along the dislocation line is studied via modeling and experimental characterization. To model these phenomena, both finite-deformation microscopic phase-field chemomechanics (MPFCM) and Monte Carlo molecular dynamics (MCMD) are employed. MPFCM calibration is carried out with the same Fe-Mn MEAM-based potential used in MCMD, as well as CALPHAD data. Simulation results for Mn segregation to, and spinodal decomposition along, straight screw and edge dislocations as well as dislocation loops, are compared with characterization results from atom probe tomography (APT) for two Fe-Mn alloy compositions. In contrast to classical Volterra dislocation theory, both MPFCM and MCMD predict a non-zero hydrostatic stress field in screw cores. Being of much smaller magnitude than the hydrostatic stress in straight edge cores, much less solute segregates to screw than to edge cores. In addition, the segregated amount in screw cores is below the critical concentration of 0.157 for the onset of spinodal decomposition along the line. Results from MPFCM-based modeling imply that the concentration dependence of the solute misfit distortion and resulting dependence of the elastic energy density on concentration have the strongest effect. The maximum amount of Mn segregating to straight edge dislocations predicted by MPFCM agrees well with APT results. The MPFCM model for Fe-Mn predicts little or no variation in Mn concentration along a straight dislocation line, in contrast to the APT results. As shown by the example of a dislocation loop in the current work, a change in the hydrostatic stress along the line due to changing character of dislocation does lead to a corresponding variation in Mn concentration. Such a variation in Mn concentration can also then be expected along a dislocation line with kinks or jogs. △ Less

Submitted 8 June, 2022; originally announced June 2022.

Accelerating phase-field-based simulation via machine learning

Authors: Iman Peivaste, Nima H. Siboni, Ghasem Alahyarizadeh, Reza Ghaderi, Bob Svendsen, Dierk Raabe, Jaber R. Mianroodi

Abstract: Phase-field-based models have become common in material science, mechanics, physics, biology, chemistry, and engineering for the simulation of microstructure evolution. Yet, they suffer from the drawback of being computationally very costly when applied to large, complex systems. To reduce such computational costs, a Unet-based artificial neural network is developed as a surrogate model in the cur… ▽ More Phase-field-based models have become common in material science, mechanics, physics, biology, chemistry, and engineering for the simulation of microstructure evolution. Yet, they suffer from the drawback of being computationally very costly when applied to large, complex systems. To reduce such computational costs, a Unet-based artificial neural network is developed as a surrogate model in the current work. Training input for this network is obtained from the results of the numerical solution of initial-boundary-value problems (IBVPs) based on the Fan-Chen model for grain microstructure evolution. In particular, about 250 different simulations with varying initial order parameters are carried out and 200 frames of the time evolution of the phase fields are stored for each simulation. The network is trained with 90% of this data, taking the $i$-th frame of a simulation, i.e. order parameter field, as input, and producing the $(i+1)$-th frame as the output. Evaluation of the network is carried out with a test dataset consisting of 2200 microstructures based on different configurations than originally used for training. The trained network is applied recursively on initial order parameters to calculate the time evolution of the phase fields. The results are compared to the ones obtained from the conventional numerical solution in terms of the errors in order parameters and the system's free energy. The resulting order parameter error averaged over all points and all simulation cases is 0.005 and the relative error in the total free energy in all simulation boxes does not exceed 1%. △ Less

Submitted 4 May, 2022; originally announced May 2022.

Phase-Field Modeling of Coupled Brittle-Ductile Fracture in Aluminum Alloys

Authors: Samad Vakili, Pratheek Shanthraj, Franz Roters, Jaber R. Mianroodi, Dierk Raabe

Abstract: Fracture in aluminum alloys with precipitates involves at least two mechanisms, namely, ductile fracture of the aluminum-rich matrix and brittle fracture of the precipitates. In this work, a coupled crystal plasticity-phase field model for mixed ductile-brittle failure modes is formulated and used to investigate the effect of precipitate morphology and size distribution on damage evolution in alum… ▽ More Fracture in aluminum alloys with precipitates involves at least two mechanisms, namely, ductile fracture of the aluminum-rich matrix and brittle fracture of the precipitates. In this work, a coupled crystal plasticity-phase field model for mixed ductile-brittle failure modes is formulated and used to investigate the effect of precipitate morphology and size distribution on damage evolution in aluminum alloys. A thermodynamically consistent framework for elastic and plastic work dissipation in the fracture process zone is used to formulate the coupled constitutive behavior for brittle and ductile damage, respectively. Representative Volume Elements (RVE) with varying particle morphology and orientation were generated and their uni-axial loading was simulated to assess the damage resistance of the different model microstructures. For critical energy release rate $G_c$ values of the aluminum matrix ranging from 4 to 8~Jm$^{-2}$ for single crystals and from 10 to 16~Jm$^{-2}$ for polycrystals, the model predicts a change in failure modes from particle debonding to cracking followed by ductile matrix failure. The change of particle failure mechanism as a result of increased $G_c$ is observed for both, single and polycrystalline model microstructures. For the case of particle debonding, microstructures with circular or ellipsoidal particles (with the major axis perpendicular to the loading direction) show a higher ductility and fracture work compared to the other studied cases. In the case of particle cracking, microstructures with ellipsoidal particles aligned parallel to the loading axis show a higher ductility and fracture work among the investigated cases. The simulations qualitatively reproduce the experimentally observed particle failure mechanisms (cracking and debonding) for two different matrix alloy classes (commercially pure and 2xxx alloys) reinforced with ceramic particles. △ Less

Submitted 29 April, 2022; originally announced April 2022.

Hierarchical nature of hydrogen-based direct reduction of iron oxides

Authors: Yan Ma, Isnaldi R. Souza Filho, Yang Bai, Johannes Schenk, Fabrice Patisson, Arik Beck, Jeroen A. van Bokhoven, Marc G. Willinger, Kejiang Li, Degang Xie, Dirk Ponge, Stefan Zaefferer, Baptiste Gault, Jaber R. Mianroodi, Dierk Raabe

Abstract: Fossil-free ironmaking is indispensable for reducing massive anthropogenic CO2 emissions in the steel industry. Hydrogen-based direct reduction (HyDR) is among the most attractive solutions for green ironmaking, with high technology readiness. The underlying mechanisms governing this process are characterized by a complex interaction of several chemical (phase transformations), physical (transport… ▽ More Fossil-free ironmaking is indispensable for reducing massive anthropogenic CO2 emissions in the steel industry. Hydrogen-based direct reduction (HyDR) is among the most attractive solutions for green ironmaking, with high technology readiness. The underlying mechanisms governing this process are characterized by a complex interaction of several chemical (phase transformations), physical (transport), and mechanical (stresses) phenomena. Their interplay leads to rich microstructures, characterized by a hierarchy of defects ranging across several orders of magnitude in length, including vacancies, dislocations, internal interfaces, and free surfaces in the form of cracks and pores. These defects can all act as reaction, nucleation, and diffusion sites, shaping the overall reduction kinetics. A clear understanding of the roles and interactions of these dynamically-evolving nano-/microstructure features is missing. Gaining better insights in these effects could enable improved access to the microstructure-based design of more efficient HyDR methods, with potentially high impact on the urgently needed decarbonization in the steel industry. △ Less

Submitted 29 January, 2022; originally announced January 2022.

On the higher-order pseudo-continuum characterization of discrete kinematic results from experimental measurement or discrete simulation

Authors: Mohammad Khorrami, Jaber R. Mianroodi, Bob Svendsen

Abstract: The purpose of this work is the development and determination of higher-order continuum-like kinematic measures which characterize discrete kinematic data obtained from experimental measurement (e.g., digital image correlation) or kinematic results from discrete modeling and simulation (e.g., molecular statics, molecular dynamics, or quantum DFT). From a continuum point of view, such data or resul… ▽ More The purpose of this work is the development and determination of higher-order continuum-like kinematic measures which characterize discrete kinematic data obtained from experimental measurement (e.g., digital image correlation) or kinematic results from discrete modeling and simulation (e.g., molecular statics, molecular dynamics, or quantum DFT). From a continuum point of view, such data or results are in general non-affine and incompatible, due for example to shear banding, material defects, or microstructure. To characterize such information in a (pseudo-) continuum fashion, the concept of discrete local deformation is introduced and exploited. The corresponding measures are determined in a purely discrete fashion independent of any relation to continuum fields. Demonstration and verification of the approach is carried out with the help of example applications based on non-affine and incompatible displacement information. In particular, for the latter case, molecular statics results for the displacement of atoms in and around a dislocation core in fcc Au are employed. The corresponding characterization of lattice distortion in and around the core in terms of higher-order discrete local deformation measures clearly shows that, even in the simplest case of planar cores, such distortion is only partly characterized by the Nye tensor. △ Less

Submitted 14 December, 2021; originally announced December 2021.

Comments: 30 pages, 19 figures

MSC Class: 53A17; 74A05; 74A10

Chemo-Mechanical Phase-Field Modeling of Iron Oxide Reduction with Hydrogen

Authors: Yang Bai, Jaber Rezaei Mianroodi, Yan Ma, Alisson Kwiatkowski da Silva, Bob Svendsen, Dierk Raabe

Abstract: The reduction of iron ore with carbon-carriers is one of the largest sources of greenhouse gas emissions in the industry, motivating global activities to replace the coke-based blast furnace reduction by hydrogen-based direct reduction (HyDR). Iron oxide reduction with hydrogen has been widely investigated both experimentally and theoretically. The process includes multiple types of chemical react… ▽ More The reduction of iron ore with carbon-carriers is one of the largest sources of greenhouse gas emissions in the industry, motivating global activities to replace the coke-based blast furnace reduction by hydrogen-based direct reduction (HyDR). Iron oxide reduction with hydrogen has been widely investigated both experimentally and theoretically. The process includes multiple types of chemical reactions, solid state and defect-mediated diffusion (by oxygen and hydrogen species), several phase transformations, as well as massive volume shrinkage and mechanical stress buildup. In this work, a chemo-mechanically coupled phase-field (PF) model has been developed to explore the interplay between phase transformation, chemical reaction, species diffusion, large elasto-plastic deformation and microstructure evolution. Energetic constitutive relations of the model are based on the system free energy which is calibrated with the help of a thermodynamic database. The model has been first applied to the classical core-shell (wüstite-iron) structure. Simulations show that the phase transformation from wüstite to alpha-iron can result in high stress and rapidly decelerating reaction kinetics. Mechanical stresses can contribute elastic energy to the system, making phase transformation difficult. Thus slow reaction kinetics and low metallization are observed. However, if the stress becomes comparatively high, it can shift the shape of the free energy from a double-well to a single-well case and speed up the transformation. The model has been further applied to simulate an actual iron oxide specimen with its complex microstructure, characterized by electron microscopy. The simulation results show that isolated pores in the microstructure are filled with water vapor during reduction, an effect which influences the local reaction atmosphere and dynamics. △ Less

Submitted 22 November, 2021; originally announced November 2021.

Lossless Multi-Scale Constitutive Elastic Relations with Artificial Intelligence

Authors: Jaber Rezaei Mianroodi, Shahed Rezaei, Nima H. Siboni, Bai-Xiang Xu, Dierk Raabe

Abstract: The elastic properties of materials derive from their electronic and atomic nature. However, simulating bulk materials fully at these scales is not feasible, so that typically homogenized continuum descriptions are used instead. A seamless and lossless transition of the constitutive description of the elastic response of materials between these two scales has been so far elusive. Here we show how… ▽ More The elastic properties of materials derive from their electronic and atomic nature. However, simulating bulk materials fully at these scales is not feasible, so that typically homogenized continuum descriptions are used instead. A seamless and lossless transition of the constitutive description of the elastic response of materials between these two scales has been so far elusive. Here we show how this problem can be overcome by using Artificial Intelligence (AI). A Convolutional Neural Network (CNN) model is trained, by taking the structure image of a nanoporous material as input and the corresponding elasticity tensor, calculated from Molecular Statics (MS), as output. Trained with the atomistic data, the CNN model captures the size- and pore-dependency of the material's elastic properties which, on the physics side, can stem from surfaces and non-local effects. Such effects are often ignored in upscaling from atomistic to classical continuum theory. To demonstrate the accuracy and the efficiency of the trained CNN model, a Finite Element Method (FEM) based result of an elastically deformed nanoporous beam equipped with the CNN as constitutive law is compared with that by a full atomistic simulation. The good agreement between the atomistic simulations and the FEM-AI combination for a system with size and surface effects establishes a new lossless scale bridging approach to such problems. The trained CNN model deviates from the atomistic result by 9.6\% for porosity scenarios of up to 90\% but it is about 230 times faster than the MS calculation and does not require to change simulation methods between different scales. The efficiency of the CNN evaluation together with the preservation of important atomistic effects makes the trained model an effective atomistically-informed constitutive model for macroscopic simulations of nanoporous materials and solving of inverse problems. △ Less

Submitted 5 August, 2021; originally announced August 2021.

Teaching Solid Mechanics to Artificial Intelligence: a fast solver for heterogeneous solids

Authors: Jaber Rezaei Mianroodi, Nima H. Siboni, Dierk Raabe

Abstract: We propose a deep neural network (DNN) as a fast surrogate model for local stress (and in principle strain) calculation in inhomogeneous non-linear material systems. We show that the DNN predicts the local stresses with about 3.8% mean absolute percentage error (MAPE) for the case of heterogeneous elastic media and a mechanical phase contrast of up to factor of 1.5 among neighboring domains, while… ▽ More We propose a deep neural network (DNN) as a fast surrogate model for local stress (and in principle strain) calculation in inhomogeneous non-linear material systems. We show that the DNN predicts the local stresses with about 3.8% mean absolute percentage error (MAPE) for the case of heterogeneous elastic media and a mechanical phase contrast of up to factor of 1.5 among neighboring domains, while performing 103 times faster than spectral solvers. The speed-up arises from the fact that after training, the DNN predicts the stress without any iterations, as opposed to the iterative nature of standard non-linear solvers. The new DNN surrogate model also proves suited for general purposes: it is capable to reproduce the stress distribution in geometries topologically far different from those used for training, implying effective learning of scenarios described by the underlying partial differential equations. Even in the case of elasto-plastic materials with up to 2 times mechanical contrast in elastic stiffness and 4 times in yield stress among adjacent regions, where conventional solvers typically require a substantial number of iterations to arrive at stress predictions, the trained model simulates the micromechanics with a MAPE of 6.4% in one single forward evaluation step of the network, i.e. without any iterative calculations even for the case of such a non-linear problem. The results reveal a completely new and highly efficient approach to solve non-linear mechanical boundary value problems and/or augment existing solution methods in corresponding hybrid variants, with an acceleration up to factor of 8300 for heterogeneous elastic-plastic materials in comparison to the currently fastest available solvers. △ Less

Submitted 16 March, 2021; originally announced March 2021.

Influence of microstructure and atomic-scale chemistry on iron ore reduction with hydrogen at 700°C

Authors: Se-Ho Kim, Xue Zhang, Kevin Schweinar, Isnaldi R. Souza Filho, Katja Angerendt, Yan Ma, Dirk Vogel, Leigh T. Stephenson, Ayman A. El-Zoka, Jaber Rezaei Mianroodi, Michael Rohwerder, Baptiste Gault, Dierk Raabe

Abstract: With 1.85 billion tons produced per year, steel is the most important material class in terms of volume and environmental impact. While steel is a sustainability enabler, for instance through lightweight design, magnetic devices, and efficient turbines, its primary production is not. For 3000 years, iron has been reduced from ores using carbon. Today 2.1 tons CO2 are produced per ton of steel, cau… ▽ More With 1.85 billion tons produced per year, steel is the most important material class in terms of volume and environmental impact. While steel is a sustainability enabler, for instance through lightweight design, magnetic devices, and efficient turbines, its primary production is not. For 3000 years, iron has been reduced from ores using carbon. Today 2.1 tons CO2 are produced per ton of steel, causing 30% of the global CO2 emissions in the manufacturing sector, which translates to 6.5% of the global CO2 emissions. These numbers qualify iron- and steel-making as the largest single industrial greenhouse gas emission source. The envisaged future industrial route to mitigate these CO2 emissions targets green hydrogen as a reductant. Although this reaction has been studied for decades, its kinetics is not well understood, particularly during the wustite reduction step which is dramatically slower than the hematite reduction. Many rate-limiting factors of this reaction are set by the micro- and nanostructure as well as the local chemistry of the ores. Their quantification allows knowledge-driven ore preparation and process optimization to make the hydrogen-based reduction of iron ores commercially viable, enabling the required massive CO2 mitigation to ease global warming. Here, we report on a multi-scale structure and composition analysis of iron reduced from hematite with pure H2, reaching down to near-atomic scale. △ Less

Submitted 10 February, 2021; originally announced February 2021.

Alloy Design for Mechanical Properties: Conquering the Length Scales

Authors: Irene J. Beyerlein, Shuozhi Xu, Javier LLorca, Jaafar A. El-Awady, Jaber R. Mianroodi, Bob Svendsen

Abstract: Predicting the structural response of advanced multiphase alloys and understanding the underlying microscopic mechanisms that are responsible for it are two critically important roles modeling plays in alloy development. An alloys demonstration of superior properties, such as high strength, creep resistance, high ductility, and fracture toughness, is not sufficient to secure its use in widespread… ▽ More Predicting the structural response of advanced multiphase alloys and understanding the underlying microscopic mechanisms that are responsible for it are two critically important roles modeling plays in alloy development. An alloys demonstration of superior properties, such as high strength, creep resistance, high ductility, and fracture toughness, is not sufficient to secure its use in widespread application. Still, a good model is needed, to take measurable alloy properties, such as microstructure and chemical composition, and forecast how the alloy will perform in specified mechanical deformation conditions, including temperature, time, and rate. In this bulletin, we highlight recent achievements by multiscale modeling in elucidating the coupled effects of alloying, microstructure, and the dynamics of mechanisms on the mechanical properties of polycrystalline alloys. Much of the understanding gained by these efforts relied on integration of computational tools that varied over many length and time scales, from first principles density functional theory, atomistic simulation methods, dislocation and defect theory, micromechanics, phase field modeling, single crystal plasticity, and polycrystalline plasticity. △ Less

Submitted 9 April, 2019; originally announced April 2019.

Journal ref: MRS Bulletin, 44, 257-265, 2019