-
Mode competition and anomalous cooling in a multimode phonon laser
Authors:
Utku Kemiktarak,
Mathieu Durand,
Michael Metcalfe,
John Lawall
Abstract:
We study mode competition in a multimode "phonon laser" comprised of an optical cavity employing a highly reflective membrane as the output coupler. Mechanical gain is provided by the intracavity radiation pressure, to which many mechanical modes are coupled. We calculate the gain, and find that strong oscillation in one mode suppresses the gain in other modes. For sufficiently strong oscillation,…
▽ More
We study mode competition in a multimode "phonon laser" comprised of an optical cavity employing a highly reflective membrane as the output coupler. Mechanical gain is provided by the intracavity radiation pressure, to which many mechanical modes are coupled. We calculate the gain, and find that strong oscillation in one mode suppresses the gain in other modes. For sufficiently strong oscillation, the gain of the other modes actually switches sign and becomes damping, a process we call "anomalous cooling." We demonstrate that mode competition leads to single-mode operation and find excellent agreement with our theory, including anomalous cooling.
△ Less
Submitted 4 February, 2014;
originally announced February 2014.
-
Mechanically Compliant Grating Reflectors for Optomechanics
Authors:
Utku Kemiktarak,
Michael Metcalfe,
Mathieu Durand,
John Lawall
Abstract:
We demonstrate micromechanical reflectors with a reflectivity as large as 99.4% and a mechanical quality factor Q as large as 7.8*10^5 for optomechanical applications. The reflectors are silicon nitride membranes patterned with sub-wavelength grating structures, obviating the need for the many dielectric layers used in conventional mirrors. We have employed the reflectors in the construction of a…
▽ More
We demonstrate micromechanical reflectors with a reflectivity as large as 99.4% and a mechanical quality factor Q as large as 7.8*10^5 for optomechanical applications. The reflectors are silicon nitride membranes patterned with sub-wavelength grating structures, obviating the need for the many dielectric layers used in conventional mirrors. We have employed the reflectors in the construction of a Fabry-Perot cavity with a finesse as high as F=1200, and used the optical response to probe the mechanical properties of the membrane. By driving the cavity with light detuned to the high-frequency side of a cavity resonance, we create an optical antidamping force that causes the reflector to self-oscillate at 211 kHz.
△ Less
Submitted 15 July, 2011;
originally announced July 2011.
-
Resolved Sideband Emission of InAs/GaAs Quantum Dots Strained by Surface Acoustic Waves
Authors:
Michael Metcalfe,
Stephen M. Carr,
Andreas Muller,
Glenn S. Solomon,
John Lawall
Abstract:
The dynamic response of InAs/GaAs self-assembled quantum dots (QDs) to strain is studied experimentally by periodically modulating the QDs with a surface acoustic wave and measuring the QD fluorescence with photoluminescence and resonant spectroscopy. When the acoustic frequency is larger than the QD linewidth, we resolve phonon sidebands in the QD fluorescence spectrum. Using a resonant pump lase…
▽ More
The dynamic response of InAs/GaAs self-assembled quantum dots (QDs) to strain is studied experimentally by periodically modulating the QDs with a surface acoustic wave and measuring the QD fluorescence with photoluminescence and resonant spectroscopy. When the acoustic frequency is larger than the QD linewidth, we resolve phonon sidebands in the QD fluorescence spectrum. Using a resonant pump laser, we have demonstrated optical frequency conversion via the dynamically modulated QD, which is the physical mechanism underlying laser sideband cooling a nanomechanical resonator by means of an embedded QD.
△ Less
Submitted 13 August, 2010;
originally announced August 2010.
-
Active feedback of a Fabry-Perot cavity to the emission of a single InAs/GaAs quantum dot
Authors:
Michael Metcalfe,
Andreas Muller,
Glenn S. Solomon,
John Lawall
Abstract:
We present a detailed study of the use of Fabry-Perot (FP) cavities for the spectroscopy of single InAs quantum dots (QDs). We derive optimal cavity characteristics and resolution limits, and measure photoluminescence linewidths as low as 0.9 GHz. By embedding the QDs in a planar cavity, we obtain a sufficiently large signal to actively feed back on the length of the FP to lock to the emission of…
▽ More
We present a detailed study of the use of Fabry-Perot (FP) cavities for the spectroscopy of single InAs quantum dots (QDs). We derive optimal cavity characteristics and resolution limits, and measure photoluminescence linewidths as low as 0.9 GHz. By embedding the QDs in a planar cavity, we obtain a sufficiently large signal to actively feed back on the length of the FP to lock to the emission of a single QD with a stability below 2% of the QD linewidth. An integration time of approximately two seconds is found to yield an optimum compromise between shot noise and cavity length fluctuations.
△ Less
Submitted 13 August, 2010;
originally announced August 2010.
-
Phase preserving amplification near the quantum limit with a Josephson Ring Modulator
Authors:
N. Bergeal,
F. Schackert,
M. Metcalfe,
R. Vijay,
V. E. Manucharyan,
L. Frunzio,
D. E. Prober,
R. J. Schoelkopf,
S. M. Girvin,
M. H. Devoret
Abstract:
Recent progress in solid state quantum information processing has stimulated the search for ultra-low-noise amplifiers and frequency converters in the microwave frequency range, which could attain the ultimate limit imposed by quantum mechanics. In this article, we report the first realization of an intrinsically phase-preserving, non-degenerate superconducting parametric amplifier, a so far mis…
▽ More
Recent progress in solid state quantum information processing has stimulated the search for ultra-low-noise amplifiers and frequency converters in the microwave frequency range, which could attain the ultimate limit imposed by quantum mechanics. In this article, we report the first realization of an intrinsically phase-preserving, non-degenerate superconducting parametric amplifier, a so far missing component. It is based on the Josephson ring modulator, which consists of four junctions in a Wheatstone bridge configuration. The device symmetry greatly enhances the purity of the amplification process and simplifies both its operation and analysis. The measured characteristics of the amplifier in terms of gain and bandwidth are in good agreement with analytical predictions. Using a newly developed noise source, we also show that our device operates within a factor of three of the quantum limit. This development opens new applications in the area of quantum analog signal processing.
△ Less
Submitted 17 December, 2009;
originally announced December 2009.
-
Coupling an epitaxial quantum dot to a fiber-based external-mirror microcavity
Authors:
Andreas Muller,
Edward B. Flagg,
Michael Metcalfe,
John Lawall,
Glenn S. Solomon
Abstract:
We report the coupling of individual InAs quantum dots (QDs) to an external-mirror microcavity. The external mirror is bonded to a fiber and positioned above a semiconductor sample consisting of a QD-containing GaAs layer on top of a distributed Bragg reflector (DBR). This open cavity can be rapidly tuned with a piezoelectric actuator without negatively affecting the QD linewidth. A mirror radiu…
▽ More
We report the coupling of individual InAs quantum dots (QDs) to an external-mirror microcavity. The external mirror is bonded to a fiber and positioned above a semiconductor sample consisting of a QD-containing GaAs layer on top of a distributed Bragg reflector (DBR). This open cavity can be rapidly tuned with a piezoelectric actuator without negatively affecting the QD linewidth. A mirror radius of curvature of 42 microns and a cavity length of 10 microns enable good mode-matching and thus high collection efficiency directly into the fiber. With an improved finesse this system may enter the strong coupling regime.
△ Less
Submitted 24 October, 2009;
originally announced October 2009.
-
Measuring the Decoherence of a Quantronium Qubit with the Cavity Bifurcation Amplifier
Authors:
M. Metcalfe,
E. Boaknin,
V. Manucharyan,
R. Vijay,
I. Siddiqi,
C. Rigetti,
L. Frunzio,
R. J. Schoelkopf,
M. H. Devoret
Abstract:
Dispersive readouts for superconducting qubits have the advantage of speed and minimal invasiveness. We have developed such an amplifier, the Cavity Bifurcation Amplifier (CBA) [10], and applied it to the readout of the quantronium qubit [2]. It consists of a Josephson junction embedded in a microwave on-chip resonator. In contrast with the Josephson bifurcation amplifier [17], which has an on-c…
▽ More
Dispersive readouts for superconducting qubits have the advantage of speed and minimal invasiveness. We have developed such an amplifier, the Cavity Bifurcation Amplifier (CBA) [10], and applied it to the readout of the quantronium qubit [2]. It consists of a Josephson junction embedded in a microwave on-chip resonator. In contrast with the Josephson bifurcation amplifier [17], which has an on-chip capacitor shunting a junction, the resonator is based on a simple coplanar waveguide imposing a pre-determined frequency and whose other RF characteristics like the quality factor are easily controlled and optimized. Under proper microwave irradiation conditions, the CBA has two metastable states. Which state is adopted by the CBA depends on the state of a quantronium qubit coupled to the CBA's junction. Due to the MHz repetition rate and large signal to noise ratio we can show directly that the coherence is limited by 1/f gate charge noise when biased at the sweet spot - a point insensitive to first order gate charge fluctuations. This architecture lends itself to scalable quantum computing using a multi-resonator chip with multiplexed readouts.
△ Less
Submitted 6 June, 2007;
originally announced June 2007.
-
Dispersive microwave bifurcation of a superconducting resonator cavity incorporating a Josephson junction
Authors:
E. Boaknin,
V. E. Manucharyan,
S. Fissette,
M. Metcalfe,
L. Frunzio,
R. Vijay,
I. Siddiqi,
A. Wallraff,
R. J. Schoelkopf,
M. Devoret
Abstract:
We have observed the dynamical bistability of a microwave superconducting Fabry-Perot cavity incorporating a non-linear element in the form of Josephson tunnel junction. The effect, which is the analog of optical bistability, manifests itself in the transmission and reflection characteristics of the cavity and is governed by a competition between the wave amplitude dependence of the resonant fre…
▽ More
We have observed the dynamical bistability of a microwave superconducting Fabry-Perot cavity incorporating a non-linear element in the form of Josephson tunnel junction. The effect, which is the analog of optical bistability, manifests itself in the transmission and reflection characteristics of the cavity and is governed by a competition between the wave amplitude dependence of the resonant frequency and the finite residence time of the field energy inside the cavity. This finite residence time is solely due to extraction of radiation from the cavity by the measurement process. The tight quantitative agreement with a simple model based on the Duffing oscillator equation shows that the nonlinearity, and hence the bifurcation phenomenon, is solely dispersive.
△ Less
Submitted 19 February, 2007;
originally announced February 2007.
-
RF bifurcation of a Josephson junction: microwave embedding circuit requirements
Authors:
V. E. Manucharyan,
E. Boaknin,
M. Metcalfe,
R. Vijay,
I. Siddiqi,
M. H. Devoret
Abstract:
A Josephson tunnel junction which is RF-driven near a dynamical bifurcation point can amplify quantum signals. The bifurcation point will exist robustly only if the electrodynamic environment of the junction meets certain criteria. In this article we develop a general formalism for dealing with the non-linear dynamics of Josephson junction embedded in an arbitrary microwave circuit. We find suff…
▽ More
A Josephson tunnel junction which is RF-driven near a dynamical bifurcation point can amplify quantum signals. The bifurcation point will exist robustly only if the electrodynamic environment of the junction meets certain criteria. In this article we develop a general formalism for dealing with the non-linear dynamics of Josephson junction embedded in an arbitrary microwave circuit. We find sufficient conditions for the existence of the bifurcation regime: a) the embedding impedance of the junction need to present a resonance at a particular frequency $ω_{R}$, with the quality factor $Q$ of the resonance and the participation ratio $p$ of the junction satisfying $Qp\gg 1$, b) the drive frequency should be low frequency detuned away from $ω_{R}$ by more than $\sqrt{3}ω_{R}/(2Q)$.
△ Less
Submitted 21 December, 2006;
originally announced December 2006.
-
Dispersive measurements of superconducting qubit coherence with a fast, latching readout
Authors:
I. Siddiqi,
R. Vijay,
M. Metcalfe,
E. Boaknin,
L. Frunzio,
R. J. Schoelkopf,
M. H. Devoret
Abstract:
The "quantronium" is a superconducting qubit consisting of a split Cooper pair box in which a large tunnel junction is inserted. This circuit has a special bias point where the Larmor frequency is, to first order, insensitive to fluctuations in the bias parameters -- the charge of the box island and the phase of the large junction. At this optimal working point, the state of the qubit can be det…
▽ More
The "quantronium" is a superconducting qubit consisting of a split Cooper pair box in which a large tunnel junction is inserted. This circuit has a special bias point where the Larmor frequency is, to first order, insensitive to fluctuations in the bias parameters -- the charge of the box island and the phase of the large junction. At this optimal working point, the state of the qubit can be determined by dispersive measurements that probe the second derivative of the state energy with respect to these bias parameters. We use the quantronium phase degree of freedom to perform a non-linear, dispersive measurement of its inductive response using bifurcation amplification. This novel readout projects the state of the qubit in a few nanoseconds, and its latching property allows us to record the resulting information in a few hundred nanoseconds. We have measured, using this technique, Rabi oscillations and Ramsey fringes with an improved signal to noise ratio and contrast. The speed of this new readout scheme also opens the door for a new class of experiments which would characterize the relaxation processes associated with the measurement protocol.
△ Less
Submitted 7 September, 2005; v1 submitted 25 July, 2005;
originally announced July 2005.
-
The Josephson Bifurcation Amplifier for Quantum Measurements
Authors:
I. Siddiqi,
R. Vijay,
F. Pierre,
C. M. Wilson,
L. Frunzio,
M. Metcalfe,
C. Rigetti,
M. H. Devoret
Abstract:
We have constructed a new type of amplifier whose primary purpose is the readout of superconducting quantum bits. It is based on the transition of an RF-driven Josephson junction between two distinct oscillation states near a dynamical bifurcation point. The main advantages of this new amplifier are speed, high-sensitivity, low back-action, and the absence of on-chip dissipation. Using pulsed mi…
▽ More
We have constructed a new type of amplifier whose primary purpose is the readout of superconducting quantum bits. It is based on the transition of an RF-driven Josephson junction between two distinct oscillation states near a dynamical bifurcation point. The main advantages of this new amplifier are speed, high-sensitivity, low back-action, and the absence of on-chip dissipation. Using pulsed microwave techniques, we demonstrate bifurcation amplification in nanofabricated Al junctions and verify that the performance predicted by theory is attained.
△ Less
Submitted 11 July, 2005;
originally announced July 2005.
-
An RF-Driven Josephson Bifurcation Amplifier for Quantum Measurements
Authors:
I. Siddiqi,
R. Vijay,
F. Pierre,
C. M. Wilson,
M. Metcalfe,
C. Rigetti,
L. Frunzio,
M. H. Devoret
Abstract:
We have constructed a new type of amplifier whose primary purpose is the readout of superconducting quantum bits. It is based on the transition of an RF-driven Josephson junction between two distinct oscillation states near a dynamical bifurcation point. The main advantages of this new amplifier are speed, high-sensitivity, low back-action, and the absence of on-chip dissipation. Pulsed microwav…
▽ More
We have constructed a new type of amplifier whose primary purpose is the readout of superconducting quantum bits. It is based on the transition of an RF-driven Josephson junction between two distinct oscillation states near a dynamical bifurcation point. The main advantages of this new amplifier are speed, high-sensitivity, low back-action, and the absence of on-chip dissipation. Pulsed microwave reflection measurements on nanofabricated Al junctions show that actual devices attain the performance predicted by theory.
△ Less
Submitted 23 December, 2003;
originally announced December 2003.
-
Direct Observation of Dynamical Switching between Two Driven Oscillation States of a Josephson Junction
Authors:
I. Siddiqi,
R. Vijay,
F. Pierre,
C. M. Wilson,
L. Frunzio,
M. Metcalfe,
C. Rigetti,
R. J. Schoelkopf,
M. H. Devoret,
D. Vion,
and D. Esteve
Abstract:
We performed a novel phase sensitive microwave reflection experiment which directly probes the dynamics of the Josephson plasma resonance in both the linear and non-linear regime. When the junction was driven below the plasma frequency into the non-linear regime, we observed for the first time the transition between two different dynamical states predicted for non-linear systems. In our experime…
▽ More
We performed a novel phase sensitive microwave reflection experiment which directly probes the dynamics of the Josephson plasma resonance in both the linear and non-linear regime. When the junction was driven below the plasma frequency into the non-linear regime, we observed for the first time the transition between two different dynamical states predicted for non-linear systems. In our experiment, this transition appears as an abrupt change in the reflected signal phase at a critical excitation power.
△ Less
Submitted 20 December, 2003;
originally announced December 2003.
