-
Anomalous Sodium Insertion in Highly Oriented Graphite: Thermodynamics, Kinetics and Evidence for Two-Sided Intercalation
Authors:
Chuanhai Gan,
Chuanlian Xiao,
Hongguang Wang,
Peter A. van Aken,
Rotraut Merkle,
Sebastian Bette,
Bettina V. Lotsch,
Joachim Maier
Abstract:
The difficult intercalation of sodium (Na) into graphite is studied by systematic and long-time investigations (of up to 2 years) using highly oriented pyrolytic graphite (HOPG). By studying chemical insertion of solid, liquid and gaseous Na at low and high temperatures (LT, HT) as well as using electrochemical insertion at 25 degree Celsius into uncoated and coated HOPG, it became clear that inse…
▽ More
The difficult intercalation of sodium (Na) into graphite is studied by systematic and long-time investigations (of up to 2 years) using highly oriented pyrolytic graphite (HOPG). By studying chemical insertion of solid, liquid and gaseous Na at low and high temperatures (LT, HT) as well as using electrochemical insertion at 25 degree Celsius into uncoated and coated HOPG, it became clear that insertion equilibrium requires HT. On decreasing chemical intercalation temperature from HT (500 degree Celsius) to LT (25 degree Celsius), thermodynamic control was found to change to diffusion control and finally to interfacial control. For the electrochemical insertion, coating (TiO2) proved advisable (to avoid co-intercalation) and efficient in reducing the interfacial resistance. Measured saturation values were found to be not higher than about 1 mol %. Towards room temperature higher equilibrium values cannot be excluded but would in view of the very low driving force kinetically be very difficult to reach. The reversible cell voltage of the saturated composition (versus alkali metal) is distinctly lower than for the analogous cells using lithium (Li) or potassium (K). Detailed transmission electron microscopy (TEM) studies reveal the unexpected fact that at HT Na predominantly enters HOPG in the form of two-sided intercalation sandwiching carbon layers (bilayers), while at LT more highly aggregated layers appear to a comparable degree, accompanied with the formation of higher-dimensional crystal imperfections. The reasons for this peculiar feature and the non-monotonic thermodynamics in the sequence Li-Na-K-Rb-Cs are discussed not only from an energetic but also from an entropic point of view.
△ Less
Submitted 12 August, 2025;
originally announced August 2025.
-
Design of a molecular Field Effect Transistor (mFET)
Authors:
Ralph C. Merkle,
Robert A. Freitas Jr.,
Damian G. Allis
Abstract:
Field Effect Transistors (FETs) are ubiquitous in electronics. As we scale FETs to ever smaller sizes, it becomes natural to ask how small a practical FET might be. We propose and analyze an atomically precise molecular FET (herein referred to as an "mFET") with 7,694 atoms made only of hydrogen and carbon atoms. It uses metallic (4,4) carbon nanotubes as the conductive leads, a linear segment of…
▽ More
Field Effect Transistors (FETs) are ubiquitous in electronics. As we scale FETs to ever smaller sizes, it becomes natural to ask how small a practical FET might be. We propose and analyze an atomically precise molecular FET (herein referred to as an "mFET") with 7,694 atoms made only of hydrogen and carbon atoms. It uses metallic (4,4) carbon nanotubes as the conductive leads, a linear segment of Lonsdaleite (hexagonal diamond) as the channel, Lonsdaleite as the insulating layer between the channel and the gate, and a (20,20) metallic carbon nanotube as the surrounding gate. The (4,4) nanotube leads are bonded to the channel using a mix of 5- and 6-membered rings, and to the gate using 5-, 6- and 7-membered rings. Issues of component design assessment and optimization using quantum chemical methods are discussed throughout. A 10 watt sugar-cube-sized computer made with $10^{18}$ such mFETs could deliver $\sim 10^{25}$ switching operations per second.
△ Less
Submitted 8 May, 2025;
originally announced May 2025.
-
A defect-chemistry-informed phase-field model of grain growth in oxide ceramics: application to Fe-doped SrTiO3
Authors:
Kai Wang,
Roger A. De Souza,
Xiang-Long Peng,
Rotraut Merkle,
Wolfgang Rheinheimer,
Karsten Albe,
Bai-Xiang Xu
Abstract:
Dopants can significantly affect the properties of oxide ceramics through their impact on the property-determined microstructure characteristics such as grain boundary (GB) segregation, space charge layer formation in the GB vicinity, and the grain growth deviating from normal patterns. To support the rational design of oxide ceramics, we propose a defect-chemistry-informed phase-field grain growt…
▽ More
Dopants can significantly affect the properties of oxide ceramics through their impact on the property-determined microstructure characteristics such as grain boundary (GB) segregation, space charge layer formation in the GB vicinity, and the grain growth deviating from normal patterns. To support the rational design of oxide ceramics, we propose a defect-chemistry-informed phase-field grain growth model to simulate the microstructure evolution of oxide ceramics. It fully respects the defect-chemistry theory by accounting for the distinct segregation energies and available site densities of charged point defects (oxygen vacancies and acceptor dopants) in both the grain interior and boundaries, and it considers the competing kinetics of defect diffusion and GB movement. The proposed phase-field model is benchmarked against well-known bicrystal models, including the Mott-Schottky and Gouy-Chapman models. Various simulation results are presented to reveal the effect of different defect-chemistry parameters on the space charge layer formation and key microstructural aspects. In particular, simulation results confirm that the solute drag effect alone can lead to skewed grain size distribution that do not follow the log-normal distribution, without any contribution from grain misorientation and other anisotropy. Interestingly, simulations also demonstrate that grain boundary potentials can vary substantially: GBs of larger grains tend to have lower potentials than those of smaller grains. Such heterogeneous GB potential distribution may inspire a new material optimization strategy through microstructure design. This study provides a comprehensive framework for defect-chemistry-consistent investigations of microstructure evolution in polycrystalline oxide ceramics, offering fundamental insights into microscopic processes during critical manufacturing stages.
△ Less
Submitted 28 September, 2025; v1 submitted 24 July, 2024;
originally announced July 2024.
-
Microscopic Dynamics of Li$^{+}$ in Rutile TiO$_{2}$ Revealed by $^{8}$Li $β$-detected NMR
Authors:
Ryan M. L. McFadden,
Terry J. Buck,
Aris Chatzichristos,
Chia-Chin Chen,
David L. Cortie,
Kim H. Chow,
Martin H. Dehn,
Victoria L. Karner,
Dimitrios Koumoulis,
C. D. Philip Levy,
Chilin Li,
Iain McKenzie,
Rotraut Merkle,
Gerald D. Morris,
Matthew R. Pearson,
Zaher Salman,
Dominik Samuelis,
Monika Stachura,
Jiyu Xiao,
Joachim Maier,
Robert F. Kiefl,
W. Andrew MacFarlane
Abstract:
We report measurements of the dynamics of isolated $^{8}$Li$^{+}$ in single crystal rutile TiO$_{2}$ using $β$-detected NMR. From spin-lattice relaxation and motional narrowing, we find two sets of thermally activated dynamics: one below 100 K; and one at higher temperatures. At low temperature, the activation barrier is $26.8(6)$ meV with prefactor $1.23(5) \times 10^{10}$ s$^{-1}$. We suggest th…
▽ More
We report measurements of the dynamics of isolated $^{8}$Li$^{+}$ in single crystal rutile TiO$_{2}$ using $β$-detected NMR. From spin-lattice relaxation and motional narrowing, we find two sets of thermally activated dynamics: one below 100 K; and one at higher temperatures. At low temperature, the activation barrier is $26.8(6)$ meV with prefactor $1.23(5) \times 10^{10}$ s$^{-1}$. We suggest this is unrelated to Li$^{+}$ motion, and rather is a consequence of electron polarons in the vicinity of the implanted $^{8}$Li$^{+}$ that are known to become mobile in this temperature range. Above 100 K, Li$^{+}$ undergoes long-range diffusion as an isolated uncomplexed cation, characterized by an activation energy and prefactor of $0.32(2)$ eV and $1.0(5) \times 10^{16}$ s$^{-1}$, in agreement with macroscopic diffusion measurements. These results in the dilute limit from a microscopic probe indicate that Li$^{+}$ concentration does not limit the diffusivity even up to high concentrations, but that some key ingredient is missing in the calculations of the migration barrier. The anomalous prefactors provide further insight into both Li$^{+}$ and polaron motion.
△ Less
Submitted 19 September, 2017;
originally announced September 2017.
