-
Surface Pourbaix plots of M@N4-graphene single-atom electrocatalysts from Density Functional Theory thermodynamic modelling
Authors:
Ana S. Dobrota,
Natalia V. Skorodumova,
Slavko V. Mentus,
Igor A. Pašti
Abstract:
Single-atom catalysts (SACs) are rapidly developing in various application areas, including electrocatalysis of different reactions, usually taking place under harsh pH-electrode potential conditions. Thus, a full atomic-level understanding of the nature of the active sites under realistic electrochemical conditions is needed, having in mind that the state of SACs active centers could be altered b…
▽ More
Single-atom catalysts (SACs) are rapidly developing in various application areas, including electrocatalysis of different reactions, usually taking place under harsh pH-electrode potential conditions. Thus, a full atomic-level understanding of the nature of the active sites under realistic electrochemical conditions is needed, having in mind that the state of SACs active centers could be altered by the adsorption of spectating species. In this contribution, Density Functional Theory is employed to conduct thermodynamic analysis of SACs with metal atoms (Mn, Fe, Co, Ni, Cu, Ru, Rh, Pd, Ag, Ir, Pt, or Au) embedded into N4 moiety in graphene. Various surface electrochemical processes on such SACs are considered, their Pourbaix plots are constructed, and their activity, selectivity, and stability under operating conditions are discussed. It is demonstrated how adsorption of H, O and OH can cause blockage and restructuring of the active sites and alter the electronic structure. Furthermore, when one deals with metals with lower d-band filling, it is shown that metal center oxidation is preferred over the oxidation of carbon lattice. The effect of the state of the metal center on the reactivity of the carbon lattice is discussed in the case of Fe@N4-graphene. Finally, a possible strategy for confirming the changes in the architecture of the SACs' active site by analyzing their vibration spectra is suggested.
△ Less
Submitted 28 November, 2021;
originally announced November 2021.
-
Electrochemical reduction of thin graphene-oxide films in aqueous solutions: restoration of conductivity
Authors:
Dalibor Karačić,
Sanjin J. Gutić,
Borislav Vasić,
Vladimir M. Mirsky,
Natalia V. Skorodumova,
Slavko V. Mentus,
Igor A. Pašti
Abstract:
Graphene oxide finds applications in different fields of science, including energy conversion. Electrochemical reduction of graphene oxide (GO) significantly improves its conductivity. However, the kinetics of this process depends on the solvent, supporting electrolyte, pH, and numerous other factors. Most studies report the macroscopic views and ex-situ properties of reduced GO. To expand the kno…
▽ More
Graphene oxide finds applications in different fields of science, including energy conversion. Electrochemical reduction of graphene oxide (GO) significantly improves its conductivity. However, the kinetics of this process depends on the solvent, supporting electrolyte, pH, and numerous other factors. Most studies report the macroscopic views and ex-situ properties of reduced GO. To expand the knowledge about GO reduction, in this study, we used cyclic voltammetry (CV), simultaneous 2 points and 4 points resistance measurement (s24), conductive atomic force microscopy (AFM), and theoretical calculations. Using CV, we demonstrated that the choice of supporting electrolyte (KCl or LiCl) influences the potential range in which electrochemical GO reduction occurs. The activation energy of this process was estimated to be below 30 kJ mol-1 in both electrolytes, being significantly lower than that required for thermal reduction of GO. Simultaneous in situ s24 resistance measurements suggest that GO films reach a highly conductive state at deep negative potentials, with an abrupt, irreversible switch from non-conductive to the conductive state. However, conductive AFM presents a more exact picture of this process: the reduction of GO films starts locally while the formed conductive islands grow during the reduction. This mechanism was confirmed by theoretical calculations indicating that the reduction starts on isolated oxygen-functional groups over the GO basal plane, while clustered OH groups are more difficult to reduce. The presented results can help in tailoring reduced GO for a particular electrochemical application by precisely controlling the reduction degree and percentage of the conductive area of the reduced GO films.
△ Less
Submitted 19 November, 2021;
originally announced November 2021.
-
Reactivity screening of single atoms on modified graphene surface -- From formation and scaling relations to catalytic activity
Authors:
Aleksandar Z. Jovanović,
Slavko V. Mentus,
Natalia V. Skorodumova,
Igor A. Pašti
Abstract:
Single atom catalysts (SACs) present the ultimate level of catalyst utilization, which puts them in the focus of current research. For this reason, their understanding is crucial for the development of new efficient catalytic systems. Using Density Functional Theory calculations, model SACs consisted of nine metals (Ni, Cu, Ru, Rh, Pd, Ag, Ir, Pt and Au) on four different supports (pristine graphe…
▽ More
Single atom catalysts (SACs) present the ultimate level of catalyst utilization, which puts them in the focus of current research. For this reason, their understanding is crucial for the development of new efficient catalytic systems. Using Density Functional Theory calculations, model SACs consisted of nine metals (Ni, Cu, Ru, Rh, Pd, Ag, Ir, Pt and Au) on four different supports (pristine graphene, N- and B-doped graphene and graphene with single vacancy) were analyzed. Among them, only graphene with a single vacancy enables the formation of SACs, which are stable in terms of aggregation and dissolution under harsh conditions of electrocatalysis. Reactivity of models SACs was probed using atomic (hydrogen and A = C, N, O and S) and molecular adsorbates (AHx, x = 1, 2, 3 or 4, depending on A), giving nearly 600 different systems included in this study. Scaling relations between adsorption energies of A and AHx on model SACs were confirmed. However, the scaling is broken for the case of CH3. There is also an evident scaling between adsorption energies of atomic and molecular adsorbates on metals SAs supported by pristine, N-doped and B-doped graphene, which originates from similar electronic structures of SAs on these supports. Using the obtained data, we have analyzed the hydrogen evolution on the model SACs. Only M@graphene vacancy systems (excluding Ag and Au) are stable under hydrogen evolution conditions in highly acidic solutions. Additional interfacial effects are discussed and the need for proper theoretical treatment when studying SACs interactions with molecular species.
△ Less
Submitted 8 January, 2021;
originally announced January 2021.
-
Theoretical analysis of doped graphene as cathode catalyst in Li-O2 and Na-O2 batteries -- the impact of the computational scheme
Authors:
Katarina A. Novčić,
Ana S. Dobrota,
Milena Petković,
Börje Johansson,
Natalia V. Skorodumova,
Slavko V. Mentus,
Igor A. Pašti
Abstract:
Understanding the reactions in M-O2 cells (M = Li or Na) is of great importance for further advancement of this promising technology. Computational modelling can be helpful along this way, but an adequate approach is needed to model such complex systems. We propose a new scheme for modelling processes in M-O2 cells, where reference energies are obtained from high-level theory, CCSD(T), while the i…
▽ More
Understanding the reactions in M-O2 cells (M = Li or Na) is of great importance for further advancement of this promising technology. Computational modelling can be helpful along this way, but an adequate approach is needed to model such complex systems. We propose a new scheme for modelling processes in M-O2 cells, where reference energies are obtained from high-level theory, CCSD(T), while the interactions of reaction intermediates with catalyst surfaces are extracted from computationally less expensive DFT. The approach is demonstrated for the case of graphene-based surfaces as model catalysts in Li-O2 and Na-O2 cells using the minimum viable mechanism. B-doped graphene was identified as the best catalyst among considered surfaces, while pristine graphene performs poorly. Moreover, we show that the inclusion of dispersion corrections for DFT has a significant impact on calculated discharge and charge potentials and suggests that long-range dispersion interactions should always be considered when graphene-based materials are modelled as electrocatalysts. Finally, we offer general guidelines for designing new ORR catalysts for M-O2 cells in terms of the optimization of the interactions of catalyst surface with reaction intermediates.
△ Less
Submitted 23 June, 2020;
originally announced June 2020.
-
Altering the reactivity of pristine, N- and P-doped graphene by strain engineering: a DFT view on energy related aspects
Authors:
Ana S. Dobrota,
Igor A. Pašti,
Slavko V. Mentus,
Börje Johansson,
Natalia V. Skorodumova
Abstract:
For carbon-based materials, in contrast to metal surfaces, the relationship between strain and reactivity is not yet established, even though there are literature reports on strained graphene. Knowledge of such relationships would be extremely beneficial for understanding the reactivity of graphene-based surfaces and finding optimisation strategies which would make these materials more suitable fo…
▽ More
For carbon-based materials, in contrast to metal surfaces, the relationship between strain and reactivity is not yet established, even though there are literature reports on strained graphene. Knowledge of such relationships would be extremely beneficial for understanding the reactivity of graphene-based surfaces and finding optimisation strategies which would make these materials more suitable for targeted applications. Here we investigate the effects of compressive and tensile strain (up to +/-5%) on the structure, electronic properties and the reactivity of pure, N-doped and P-doped graphene, using DFT calculations. We demonstrate the possibility of tuning the topology of the graphene surface by strain, as well as by the choice of the dopant atom. The reactivity of (doped) strained graphene is probed using H and Na as simple adsorbates of great practical importance. Strain can both enhance and weaken H and Na adsorption on (doped) graphene. In case of Na adsorption, a linear relationship is observed between the Na adsorption energy on P-doped graphene and the phosphorus charge. A linear relationship between the Na adsorption energy on flat graphene surfaces and strain is found. Based on the adsorption energies and electrical conductivity, potentially good candidates for hydrogen storage and sodium-ion battery electrodes are discussed.
△ Less
Submitted 24 October, 2019;
originally announced October 2019.
-
Nanocarbons derived from polymers for electrochemical energy conversion and storage - A review
Authors:
Igor A. Pašti,
Aleksandra Janoševic Ležaic,
Nemanja M. Gavrilov,
Gordana Ciric-Marjanovic,
Slavko V. Mentus
Abstract:
Energy demands of modern society require efficient means of energy conversion and storage. Nanocarbons have been identified as versatile materials which combine many desirable properties, allowing them to be used in electrochemical power sources, from electrochemical capacitors to fuel cells. Efficient production of nanocarbons requires innovative and scalable approaches which allow for tuning of…
▽ More
Energy demands of modern society require efficient means of energy conversion and storage. Nanocarbons have been identified as versatile materials which combine many desirable properties, allowing them to be used in electrochemical power sources, from electrochemical capacitors to fuel cells. Efficient production of nanocarbons requires innovative and scalable approaches which allow for tuning of their physical and chemical properties. Carbonization of polymeric nanostructures has been demonstrated as a promising approach for production of high-performance nanocarbons with desired morphology and variable surface chemical properties. These materials have been successfully used as active electrode materials in electrochemical capacitors, as electrocatalysts or catalyst supports. Moreover, these materials are often found as parts of composite electrode materials where they play very important role in boosting materials performance. In this contribution we shall review developments in the field of application of polymer-derived nanocarbons for electrochemical energy conversion and storage applications, covering the last decade. Primary focus will be on polyaniline and polypyrrole but carbons derived from other polymers will also be mentioned. We shall emphasize the link between the physical and chemical properties of nanocarbons and their performance in electrochemical power sources with an attempt to derive general guidelines for further development of new materials with improved performances.
△ Less
Submitted 27 December, 2018;
originally announced December 2018.
-
Electrochemical tuning of capacitive response of graphene oxide
Authors:
Sanjin J. Gutić,
Dževad Kozlica,
Fehim Korać,
Danica Bajuk-Bogdanović,
Miodrag Mitrić,
Vladimir M. Mirsky,
Slavko V. Mentus,
Igor A. Pašti
Abstract:
Increasing energy demands of modern society requires deep understanding of the properties of energy storage materials as well as their performance tuning. We show that the capacitance of graphene oxide (GO) can be precisely tuned using a simple electrochemical reduction route. In situ resistance measurements, combined with cyclic voltammetry measurement and Raman spectroscopy, have shown that upon…
▽ More
Increasing energy demands of modern society requires deep understanding of the properties of energy storage materials as well as their performance tuning. We show that the capacitance of graphene oxide (GO) can be precisely tuned using a simple electrochemical reduction route. In situ resistance measurements, combined with cyclic voltammetry measurement and Raman spectroscopy, have shown that upon the reduction GO is irreversibly deoxygenated which is further accompanied with structural ordering and increasing of electrical conductivity. The capacitance is maximized when the concentration of oxygen functional groups is properly balanced with the conductivity. Any further reduction and de-oxygenation leads to the gradual loss of the capacitance. The observed trend is independent on the preparation route and on the exact chemical and structural properties of GO. It is proposed that an improvement of capacitive properties of any GO can be achieved by optimization of its reduction conditions.
△ Less
Submitted 25 July, 2018; v1 submitted 31 May, 2018;
originally announced June 2018.
-
Structural and electronic properties of V2O5 and their tuning by doping with 3d elements - Modelling with DFT+U method and dispersion correction
Authors:
A. Jovanović,
A. S. Dobrota,
L. D. Rafailović,
S. V. Mentus,
I. A. Pašti,
B. Johansson,
N. V. Skorodumova
Abstract:
New electrode materials for alkaline-ion batteries are a timely topic. Among many promising candidates, V2O5 is one of the most interesting cathode materials. While having very high theoretical capacity, in practice, its performance is hindered by low stability and poor conductivity. As regards theoretical descriptions of V2O5, common DFT-GGA calculations fail to reproduce both the electronic and…
▽ More
New electrode materials for alkaline-ion batteries are a timely topic. Among many promising candidates, V2O5 is one of the most interesting cathode materials. While having very high theoretical capacity, in practice, its performance is hindered by low stability and poor conductivity. As regards theoretical descriptions of V2O5, common DFT-GGA calculations fail to reproduce both the electronic and crystal structure. While the band gap is underestimated, the interlayer spacing is overestimated as weak dispersion interactions are not properly described within GGA. Here we show that the combination of the DFT+U method and semi-empirical D2 correction can compensate for the drawbacks of the GGA approximation when it comes to the modelling of V2O5. When compared to common PBE calculations, with a modest increase of the computational cost, PBE+U+D2 fully reproduced the experimental band gap of V2O5, while the errors in the lattice parameters are only a few percent. Using the proposed PBE+U+D2 methodology we studied V2O5 doped with 3d elements (from Sc to Zn). We show that both the structural and electronic parameters are affected by doping. Most importantly, a significant increase of conductivity is expected upon doping, which is of great importance for the application of V2O5 in metal-ion batteries.
△ Less
Submitted 4 April, 2018; v1 submitted 9 February, 2018;
originally announced February 2018.
-
Sodium storage via single epoxy group on graphene - The role of surface doping
Authors:
Nataša P. Diklić,
Ana S. Dobrota,
Igor A. Pašti,
Slavko V. Mentus,
Börje Johansson,
Natalia V. Skorodumova
Abstract:
Due to its unique physical and chemical properties, graphene is being considered as a promising material for energy conversion and storage applications. Introduction of functional groups and dopants on/in graphene is a useful strategy for tuning its properties. In order to fully exploit its potential, atomic-level understanding of its interaction with species of importance for such applications is…
▽ More
Due to its unique physical and chemical properties, graphene is being considered as a promising material for energy conversion and storage applications. Introduction of functional groups and dopants on/in graphene is a useful strategy for tuning its properties. In order to fully exploit its potential, atomic-level understanding of its interaction with species of importance for such applications is required. We present a DFT study of the interaction of sodium atoms with epoxy-graphene and analyze how this interaction is affected upon doping with boron and nitrogen. We demonstrate how the dopants, combined with oxygen-containing groups alter the reactivity of graphene towards Na. Dopants act as attractors of epoxy groups, enhancing the sodium adsorption on doped oxygen-functionalized graphene when compared to the case of non-doped epoxy-graphene. Furthermore, by considering thermodynamics of the Na interaction with doped epoxy-graphene it has been concluded that such materials are good candidates for Na storage applications. Therefore, we suggest that controlled oxidation of doped carbon materials could lead to the development of advanced anode materials for rechargeable Na-ion batteries.
△ Less
Submitted 25 January, 2018;
originally announced January 2018.
-
Atomic adsorption on graphene with a single vacancy: systematic DFT study through the Periodic Table of Elements
Authors:
Igor A. Pašti,
Aleksandar Jovanović,
Ana S. Dobrota,
Slavko V. Mentus,
Börje Johansson,
Natalia V. Skorodumova
Abstract:
Vacancies in graphene present sites of altered chemical reactivity and open possibilities to tune graphene properties by defect engineering. The understanding of chemical reactivity of such defects is essential for successful implementation of carbon materials in advanced technologies. We report the results of a systematic DFT study of atomic adsorption on graphene with a single vacancy for the el…
▽ More
Vacancies in graphene present sites of altered chemical reactivity and open possibilities to tune graphene properties by defect engineering. The understanding of chemical reactivity of such defects is essential for successful implementation of carbon materials in advanced technologies. We report the results of a systematic DFT study of atomic adsorption on graphene with a single vacancy for the elements of rows 1 to 6 of the Periodic Table of Elements (PTE), excluding lanthanides. The calculations have been performed using PBE, long-range dispersion interaction-corrected PBE (PBE+D2 and PBE+D3) and non-local vdW-DF2 functional. We find that most elements strongly bind to the vacancy, except for the elements of groups 11 and 12, and noble gases, for which the contribution of dispersion interaction to bonding is most significant. The strength of the interaction with the vacancy correlates with the cohesive energy of the elements in their stable phases: the higher the cohesive energy is the stronger bonding to the vacancy can be expected. As most atoms can be trapped at the SV site we have calculated the potentials of dissolution and found that in most cases the metals adsorbed at the vacancy are more "noble" than they are in their corresponding stable phases.
△ Less
Submitted 1 December, 2017; v1 submitted 27 October, 2017;
originally announced October 2017.
-
Lattice mismatch as the descriptor of segregation, stability and reactivity of supported thin catalyst films
Authors:
Edvin Fako,
Ana S. Dobrota,
Igor A. Pašti,
Núria López,
Slavko V. Mentus,
Natalia V. Skorodumova
Abstract:
Increasing demand and high prices of advanced catalysts motivate a constant search for novel active materials with reduced content of noble metals. The development of thin films and core-shell catalysts seem to be a promising strategy along this path. Using Density Functional Theory we have analyzed a number of surface properties of supported bimetallic thin films with composition A3B (where A = P…
▽ More
Increasing demand and high prices of advanced catalysts motivate a constant search for novel active materials with reduced content of noble metals. The development of thin films and core-shell catalysts seem to be a promising strategy along this path. Using Density Functional Theory we have analyzed a number of surface properties of supported bimetallic thin films with composition A3B (where A = Pt, Pd, B = Cu, Ag, Au). We focus on surface segregation, dissolution stability and surface electronic structure. We also address the chemisorption properties of Pd3Au thin films supported by different substrates, by probing the surface reactivity with CO. We find a strong influence of the support in the case of mono- and bilayers, while the surface strain seems to be the predominant factor in determining the surface properties of supported trilayers and thicker films. In particular, we show that the studied properties of the supported trilayers can be predicted from the lattice mismatch between the overlayer and the support. Namely, if the strain dependence of the corresponding quantities for pure strained surfaces is known, the properties of strained supported trilayers can be reliably estimated. The obtained results can be used in the design of novel catalysts and predictions of the surface properties of supported ultrathin catalyst layers.
△ Less
Submitted 30 November, 2017; v1 submitted 27 October, 2017;
originally announced October 2017.
-
Atomic adsorption on pristine graphene along the Periodic Table of Elements - From PBE to non-local functionals
Authors:
Igor A. Pašti,
Aleksandar Jovanović,
Ana S. Dobrota,
Slavko V. Mentus,
Börje Johansson,
Natalia V. Skorodumova
Abstract:
The understanding of atomic adsorption on graphene is of high importance for many advanced technologies. Here we present a complete database of the atomic adsorption energies for the elements of the Periodic Table up to the atomic number 86 (excluding lanthanides) on pristine graphene. The energies have been calculated using the projector augmented wave (PAW) method with PBE, long-range dispersion…
▽ More
The understanding of atomic adsorption on graphene is of high importance for many advanced technologies. Here we present a complete database of the atomic adsorption energies for the elements of the Periodic Table up to the atomic number 86 (excluding lanthanides) on pristine graphene. The energies have been calculated using the projector augmented wave (PAW) method with PBE, long-range dispersion interaction corrected PBE (PBE+D2, PBE+D3) as well as non-local vdW-DF2 approach. The inclusion of dispersion interactions leads to an exothermic adsorption for all the investigated elements. Dispersion interactions are found to be of particular importance for the adsorption of low atomic weight earth alkaline metals, coinage and s-metals (11th and 12th groups), high atomic weight p-elements and noble gases. We discuss the observed adsorption trends along the groups and rows of the Periodic Table as well some computational aspects of modelling atomic adsorption on graphene.
△ Less
Submitted 30 November, 2017; v1 submitted 18 October, 2017;
originally announced October 2017.
