-
Nanostructural Superconducting Materials for Fault Current Limiters and Cryogenic Electrical Machines
Authors:
T. A. Prikhna,
W. Gawalek,
Ya. M. Savchuk,
N. V. Sergienko,
V. E. Moshchil,
V. Sokolovsky,
J. Vajda,
V. N. Tkach,
F. Karau,
H. Weber,
M. Eisterer,
A. Juolain,
J. Rabier,
X. Chaud,
M. Wendt,
J. Dellith,
N. I. Danilenko,
T. Habisreuther,
S. N. Dub,
V. Meerovich,
D. Litzkendorf,
P. A. Nagorny,
L. K. Kovalev,
Ch. Schmidt,
V. S. Melnikov
, et al. (5 additional authors not shown)
Abstract:
Materials of the Y-Ba-Cu-O (melt-textured YBa2Cu3O7-d-based materials or MT-YBCO) and Mg-B-O (MgB2-based materials) systems with high superconducting performance, which can be attained due to the formation of regularly distributed nanostructural defects and inhomogenities in their structure can be effectively used in cryogenic technique, in particular in fault current limiters and electrical mac…
▽ More
Materials of the Y-Ba-Cu-O (melt-textured YBa2Cu3O7-d-based materials or MT-YBCO) and Mg-B-O (MgB2-based materials) systems with high superconducting performance, which can be attained due to the formation of regularly distributed nanostructural defects and inhomogenities in their structure can be effectively used in cryogenic technique, in particular in fault current limiters and electrical machines (electromotors, generators, pumps for liquid gases, etc.). The developed processes of high-temperature (900-800 oC) oxygenation under elevated pressure (16 MPa) of MT-YBCO and high-pressure (2 GPa) synthesis of MgB2-based materials allowed us to attain high SC (critical current densities, upper critical fields, fields of irreversibility, trapped magnetic fields) and mechanical (hardness, fracture toughness, Young modulus) characteristics. It has been shown that the effect of materials properties improvement in the case of MT-YBCO was attained due to the formation of high twin density (20-22 micron-1), prevention of macrockracking and reduction (by a factor of 4.5) of microcrack density, and in the case of MgB2-based materials due to the formation of oxygen-enriched as compared to the matrix phase fine-dispersed Mg-B-O inhomogenities as well as inclusions of higher borides with near-MgB12 stoichiometry in the Mg-B-O matrix (with 15-37 nm average grain sizes). The possibility is shown to obtain the rather high Tc (37 K) and critical current densities in materials with MgB12 matrix (with 95 percent of shielding fraction as calculated from the resistant curve).
△ Less
Submitted 24 December, 2009;
originally announced December 2009.
-
Effect of higher borides and inhomogeneity of oxygen distribution on critical current density of undoped and doped magnesium diboride
Authors:
T. A. Prikhna,
W. Gawalek,
V. M. Tkach,
N. I. Danilenko,
Ya M. Savchuk,
S. N. Dub,
V. E. Moshchil,
A. V. Kozyrev,
N. V. Sergienko,
M. Wendt,
V. S. Melnikov,
J. Dellith,
H Weber,
M Eisterer,
Ch Schmidt,
T Habisreuther,
D Litzkendorf,
J Vajda,
A. P. Shapovalov,
V. Sokolovsky,
P. A. Nagorny,
V. B. Sverdun,
J. Kosa,
F. Karau,
A. V. Starostina
Abstract:
The effect of doping with Ti, Ta, SiC in complex with synthesis temperature on the amount and distribution of structural inhomogeneities in MgB2 matrix of high-pressuresynthesized-materials (2 GPa) which can influence pining: higher borides (MgB12) and oxygen-enriched Mg-B-O inclusions, was established and a mechanism of doping effect on jc increase different from the generally accepted was prop…
▽ More
The effect of doping with Ti, Ta, SiC in complex with synthesis temperature on the amount and distribution of structural inhomogeneities in MgB2 matrix of high-pressuresynthesized-materials (2 GPa) which can influence pining: higher borides (MgB12) and oxygen-enriched Mg-B-O inclusions, was established and a mechanism of doping effect on jc increase different from the generally accepted was proposed. Near theoretically dense SiC-doped material exhibited jc= 1000000 A/sq. cm in 1T field and Hirr =8.5 T at 20 K. The highest jc in fields above 9, 6, and 4 T at 10, 20, and 25 K, respectively, was demonstrated by materials synthesized at 2 GPa, 600 oC from Mg and B without additions (at 20 K jc= 100 A/sq. cm in 10 T field). Materials synthesized from Mg and B taken up to 1:20 ratio were superconductive. The highest jc (60000 A/sq. cm at 20 K in zero field, Hirr= 5 T) and the amount of SC phase (95.3 percents of shielding fraction), Tc being 37 K were demonstrated by materials having near MgB12 composition of the matrix. The materials with MgB12 matrix had a doubled microhardness of that with MgB2 matrix (25 GPa and 13.08 GPa, at a load of 4.9 N, respectively).
△ Less
Submitted 24 December, 2009;
originally announced December 2009.
-
High-pressure synthesis of MgB2 with addition of Ti
Authors:
T. A. Prikhna,
W. Gawalek,
Ya. M. Savchuk,
V. E. Moshchil,
N. V. Sergienko,
R. Hergt,
M. Wendt,
S. N. Dub,
Ch. Schmidt,
J. Dellith,
V. S. Melnikov,
T. Habisreuther,
D. Litzkendorf,
P. A. Nagorny
Abstract:
The MgB2 - based material high-pressure synthesized at 2 GPa and 800 C for 1 h from Mg and B (taken in the stoichiometry ratio of MgB2) with addition of 2-10 wt% of Ti demonstrated the critical current density (jc) higher than 100 kA/cm^2 at 33 K in 0 T field and at 20 K up to 3 T. At 20 K the critical current density higher than 10 kA/cm^2 was observed up to 5 T field. In the magnetic field up…
▽ More
The MgB2 - based material high-pressure synthesized at 2 GPa and 800 C for 1 h from Mg and B (taken in the stoichiometry ratio of MgB2) with addition of 2-10 wt% of Ti demonstrated the critical current density (jc) higher than 100 kA/cm^2 at 33 K in 0 T field and at 20 K up to 3 T. At 20 K the critical current density higher than 10 kA/cm^2 was observed up to 5 T field. In the magnetic field up to 2 T high-pressure synthesized MgB2 (with 10 % of Ti) at 20 K behaves in the same manner as Nb3Sn at 4.2 K. In XRD patterns of magnesium diboride with the Ti added, we observed no evidence of titanium diboride or unreacted titanium and only one compound with titanium was identified, namely, titanium dihydride TiH2 (or more strictly TiH1.924). The sample with the highest critical current density and irreversible field in the temperature range of 25-10 K contained some amount of pure Mg that was rather homogeneously dispersed in the material. The critical currents and irreversible fields of magnesium diboride synthesized at high pressure with Ti added are higher than those in the case where Ta has been added.
△ Less
Submitted 1 June, 2003;
originally announced June 2003.
-
Synthesis and Sintering of MgB2 Under High Pressure
Authors:
T. A. Prikhna,
Ya. M. Savchuk,
N. V. Sergienko,
V. E. Moshchil,
S. N. Dub,
P. A. Nagorny,
W. Gawalek,
T. Habisreuther,
M. Wendt,
A. B. Surzhenko,
D. Litzkendorf,
Ch. Schmidt,
J. Dellith,
V. S. Melnikov
Abstract:
High-pressure (HP) synthesis and sintering are promising methods for manufacturing of the bulk MgB2 superconductive material. The available high-pressure apparatuses with 100 cm3 working volume can allow us to use the bulk MgB2 for practical applications such as electromotors, fly-wheels, bearings, etc. We have found that the Ta presence during HP synthesis (especially) or sintering process (in…
▽ More
High-pressure (HP) synthesis and sintering are promising methods for manufacturing of the bulk MgB2 superconductive material. The available high-pressure apparatuses with 100 cm3 working volume can allow us to use the bulk MgB2 for practical applications such as electromotors, fly-wheels, bearings, etc. We have found that the Ta presence during HP synthesis (especially) or sintering process (in the form of a foil that covered the sample and as an addition of Ta powder of about 2-10 wt.% to the starting mixture of B and Mg or to MgB2 powder) increases the critical current density (jc) in the magnetic fields up to 10 T and the fields of irreversibility (Hirr) of MgB2-based bulk materials. We observed the strong evidences that Ta absorbs hydrogen and nitrogen during synthesis and sintering to form Ta2H, TaH and TaN0.1 and prevents or reduces the formation of MgH2 (both with orthorhombic and tetragonal structures). Ta also essentially reduces the amount of impurity nitrogen in black Mg-B (most likely, MgB2) crystals of the matrix phase. The presence of Ta during synthesis allowed us to obtain a bulk materials with the following critical current densities jc in 1 T field: 570 kA/cm2 at 10 K, 350 kA/cm2 at 20 K and 40 kA/cm2 at 30 K. Besides, the materials demonstrated high mechanical characteristics (microhardness, fracture toughness, Young modulus).
△ Less
Submitted 3 April, 2002;
originally announced April 2002.
-
The high-pressure synthesis of MgB2
Authors:
T. A. Prikhna,
W. Gawalek,
A. B. Surzhenko,
N. V. Sergienko,
V. E. Moshchil,
T. Habisreuther,
V. S. Melnikov,
S. N. Dub,
P. A. Nagorny,
M. Wendt,
Ya. M. Savchuk,
D. Litzkendorf,
J. Dellith,
S. Kracunovska,
Ch. Schmidt
Abstract:
The high-pressure synthesis is one of the most promising methods to produce MgB2 superconductive (SC) material. The available high-pressure apparatuses have working volume up to 100 cm3 which allows samples up to 60 mm in diameter to be manufactured. By a short-term (1h) high-pressure (2GPa) synthesis from Mg and B we have obtained samples 2.4-2.5 g/cm3 in density, 12.1-15.6 GPa in microhardness…
▽ More
The high-pressure synthesis is one of the most promising methods to produce MgB2 superconductive (SC) material. The available high-pressure apparatuses have working volume up to 100 cm3 which allows samples up to 60 mm in diameter to be manufactured. By a short-term (1h) high-pressure (2GPa) synthesis from Mg and B we have obtained samples 2.4-2.5 g/cm3 in density, 12.1-15.6 GPa in microhardness (under 4.96 N load), 170-200 kA/cm2 at 10 K and 58-62 kA/cm2 at 20 K in critical current density at a magnetic field of 1T. Samples demonstrated 8.5 T irreversible field at 10 K and 5.5 T at 20 K. The Ta positive influence on SC properties of MgB2 has been observed.
△ Less
Submitted 12 September, 2001;
originally announced September 2001.
