Architectural bone parameters and the relationship to titanium lattice design for powder bed fusion additive manufacturing
Authors:
Martine McGregor,
Sagar Patel,
Stewart McLachlin,
Mihaela Vlasea
Abstract:
Additive manufacturing (AM) of titanium (Ti) and Ti-6Al-4V lattices has been proposed for bone implants and augmentation devices. Ti and Ti-6Al-4V have favourable biocompatibility, corrosion resistance and fatigue strength for bone applications; yet, the optimal parameters for Ti-6Al-4V lattice designs corresponding to the natural micro- and meso-scale architecture of human trabecular and cortical…
▽ More
Additive manufacturing (AM) of titanium (Ti) and Ti-6Al-4V lattices has been proposed for bone implants and augmentation devices. Ti and Ti-6Al-4V have favourable biocompatibility, corrosion resistance and fatigue strength for bone applications; yet, the optimal parameters for Ti-6Al-4V lattice designs corresponding to the natural micro- and meso-scale architecture of human trabecular and cortical bone are not well understood. A comprehensive review was completed to compare the natural lattice architecture properties in human bone to Ti and Ti-6Al-4V lattice structures for bone replacement and repair. Ti and Ti-6Al-4V lattice porosity has varied from 15% to 97% with most studies reporting a porosity between 50-70%. Cortical bone is roughly 5-15% porous and lattices with 50-70% porosity are able to achieve comparable stiffness, compressive strength, and yield strength. Trabecular bone has a reported porosity range from 70-90%, with trabecular thickness varying from 120-200 μm. Existing powder bed fusion technologies have produced strut and wall thicknesses ranging from 200-1669 μm. This suggests limited overlap between current AM of Ti and Ti-6Al-4V lattice structures and trabecular bone architecture, indicating that replicating natural trabecular bone parameters with latticing is prohibitively challenging. This review contributes to the body of knowledge by identifying the correspondence of Ti and Ti-6Al-4V lattices to the natural parameters of bone microarchitectures, and provides further guidance on the design and AM recommendations towards addressing recognized performance gaps with powder bed fusion technologies.
△ Less
Submitted 2 July, 2021; v1 submitted 17 May, 2021;
originally announced May 2021.
Temperature dependence of the ohmic conductivity and activation energy of Pb1+y(Zr0.3Ti0.7)O3 thin films
Authors:
D. P. Chu,
B. M. McGregor,
P. Migliorato,
C. Durkan,
M. E. Welland,
K. Hasegawa,
T. Shimoda
Abstract:
The ohmic conductivity of the sol-gel derived Pb1+y(Zr0.3Ti0.7)O3 thin films (with the excess lead y=0.0 to 0.4) are investigated using low frequency small signal alternate current (AC) and direct current (DC) methods. Its temperature dependence shows two activation energies of 0.26 and 0.12 eV depending on temperature range and excess Pb levels. The former is associated with Pb3+ acceptor cente…
▽ More
The ohmic conductivity of the sol-gel derived Pb1+y(Zr0.3Ti0.7)O3 thin films (with the excess lead y=0.0 to 0.4) are investigated using low frequency small signal alternate current (AC) and direct current (DC) methods. Its temperature dependence shows two activation energies of 0.26 and 0.12 eV depending on temperature range and excess Pb levels. The former is associated with Pb3+ acceptor centers, while the latter could be due to a different defect level yet to be identified.
△ Less
Submitted 5 June, 2001;
originally announced June 2001.
