Showing 1–4 of 4 results for author: Mathieu, J

Modeling of Deformation and Texture Development of Copper in a 120° ECAE Die

Authors: Roxane Arruffat Massion, L. S. Toth, Jean-Philippe Mathieu

Abstract: A flow line function is proposed to describe the material deformation in ECAE for a 120\degree die. This new analytical approach is incorporated into a viscoplastic self-consistent polycrystal code to simulate the texture evolution in Route A of copper and compared to experimental textures as well as to those corresponding to simple shear. A flow line function is proposed to describe the material deformation in ECAE for a 120\degree die. This new analytical approach is incorporated into a viscoplastic self-consistent polycrystal code to simulate the texture evolution in Route A of copper and compared to experimental textures as well as to those corresponding to simple shear. △ Less

Submitted 12 May, 2012; originally announced May 2012.

Journal ref: Scripta Materialia 54, 9 (2006) 1667-1672

Silver paint as a soldering agent for DyBaCuO single-domains welding

Authors: J-P. Mathieu, J-F. Fagnard, Ph. Laurent, B. Mattivi, C. Henrist, Ph. Vanderbemden, M. Ausloos, R. Cloots

Abstract: Silver paint has been tested as a soldering agent for DyBaCuO single-domain welding. Junctions have been manufactured on Dy-Ba-Cu-O single-domains cut either along planes parallel to the c-axis or along the ab-planes. Microstructural and superconducting characterisations of the samples have been performed. For both types of junctions, the microstructure in the joined area is very clean: no secon… ▽ More Silver paint has been tested as a soldering agent for DyBaCuO single-domain welding. Junctions have been manufactured on Dy-Ba-Cu-O single-domains cut either along planes parallel to the c-axis or along the ab-planes. Microstructural and superconducting characterisations of the samples have been performed. For both types of junctions, the microstructure in the joined area is very clean: no secondary phase or Ag particles segregation has been observed. Electrical and magnetic measurements for all configurations of interest are reported $ρ(T)$ curves, and Hall probe mapping). The narrow resistive superconducting transition reported for all configurations shows that the artificial junction does not affect significantly the measured superconducting properties of the material. △ Less

Submitted 8 January, 2005; originally announced January 2005.

Comments: 12 pages, including 5 figures; 34 references; to be published in Supercond. Sci. Technol

Journal ref: Supercond. Sci. Technol. 18 (2005) 508 - 512

From RE-211 to RE-123. How to control the final microstructure of superconducting single-domains

Authors: R. Cloots, T. Koutzarova, J. -P. Mathieu, M. Ausloos

Abstract: This paper reviews the usual techniques for producing YBCO-type single-domains and the microstructure of the as-obtained samples. The problems of seed dissolution and parasite nucleations are discussed in details. Formation of microstructural defects, such as pores and cracks, are examined. An important part of this review is devoted to the study of the influence of RE-211 particles [RE2BaCuO5 w… ▽ More This paper reviews the usual techniques for producing YBCO-type single-domains and the microstructure of the as-obtained samples. The problems of seed dissolution and parasite nucleations are discussed in details. Formation of microstructural defects, such as pores and cracks, are examined. An important part of this review is devoted to the study of the influence of RE-211 particles [RE2BaCuO5 where RE denotes Y, Yb, Nd, Sm, Dy, Gd, Eu or a mixture of them. Generally Nd4Ba2Cu2O10 is preferred to Nd2BaCuO5] on the microstructure and properties of RE-Ba-Cu-O single-domains. Trapping/Pushing theory is described in order to explain the spatial distribution of RE-211 particles in the RE-123 [(RE)Ba2Cu3O7-d] monoliths. Formation of RE-211-free regions is discussed. Different ways to limit the RE-211 coarsening are reviewed. Microstructural defects in the RE-123 matrix caused by the RE-211 particles are presented. It is also shown that RE-211 particles play a significant role on the mechanical properties of single-domain samples. We finish this review by discussing the Infiltration and Growth process as a good technique to control the microstructure. △ Less

Submitted 11 October, 2004; originally announced October 2004.

Comments: review paper to be published in Supercond. Sci. Technol.; 19 figures; 137 references; 37 pages

Journal ref: Supercond. Sci. Technol. 18 (2005) R9-R23

The contribution of 211 particles to the mechanical reinforcement mechanism of 123 superconducting single domains

Authors: J. -P. Mathieu, I. G. Cano, T. Koutzarova, A. Rulmont, Ph. Vanderbemden, D. Dew-Hughes, M. Ausloos, R. Cloots

Abstract: Hardness and fracture toughness of Dy-123 single-domains were studied by Vickers micro-indentation. A significant anisotropy of the mechanical properties was observed. Hardness tests give higher values when performed in (001) planes rather than in planes parallel to the c-axis. Moreover cracks pattern around the indentation follows preferential orientation in planes parallel to the c-axis wherea… ▽ More Hardness and fracture toughness of Dy-123 single-domains were studied by Vickers micro-indentation. A significant anisotropy of the mechanical properties was observed. Hardness tests give higher values when performed in (001) planes rather than in planes parallel to the c-axis. Moreover cracks pattern around the indentation follows preferential orientation in planes parallel to the c-axis whereas a classical ''four-cracks'' pattern is observed in the (001) planes. It has been possible to show the crucial role played by the 211-particles in the deviating mechanism of cracks and the relevance of the 211-particle distribution high homogeneity in the material. △ Less

Submitted 3 October, 2003; originally announced October 2003.

Comments: 14 pages, including 5 figures and 1 Table. submitted to Supercond. Sci. Technol

Journal ref: Supercond. Sci. Technol. 17 (2003) 169 - 174