-
Novel high symmetry super-hard C48 and C32 allotropes with ana and ukc original topologies: Crystal chemistry and DFT investigations
Authors:
Samir F Matar
Abstract:
Novel high symmetry body centered carbon allotropes: cubic C48 and tetragonal C32 are proposed with respective original ana and ukc topologies. Devised from crystal structure engineering, their ground state structures and energy derived physical properties were accurately derived based on quantum mechanics calculations within the density functional theory DFT. Both allotropes made of distorted tet…
▽ More
Novel high symmetry body centered carbon allotropes: cubic C48 and tetragonal C32 are proposed with respective original ana and ukc topologies. Devised from crystal structure engineering, their ground state structures and energy derived physical properties were accurately derived based on quantum mechanics calculations within the density functional theory DFT. Both allotropes made of distorted tetrahedral C4 arrangements were found dense with rho larger than 3g.cm-3 that remain lower than diamond (rho = 3.50 g.cm-3). With cohesive albeit with metastable ground state structures, both allotropes show stability from the mechanical (elastic properties) and dynamic (phonons band structures) properties. Vickers hardness magnitudes HV(C48) =47 GPa and HV(C32) = 59 GPa point to super-hard materials. The electronic band structures range from large direct band gap close to 5 eV for C48 to indirect band gap close to 2.5 eV semi-conducting C32. Such findings of original allotropes with targeted physical properties are bound to enrich the field of research on carbon.
△ Less
Submitted 16 May, 2025;
originally announced May 2025.
-
Original mechanism of transformation from soft metallic (sp2/sp3) C12 to ultra-dense and ultra-hard (sp3) semi-conducting C12: Crystal chemistry and DFT characterizations
Authors:
Samir F Matar
Abstract:
An original mechanism is proposed for a pressure-induced transformation of orthorhombic C12 from ground state normal pressure (NP) sp2/sp3 allotrope to ultra-dense and ultra-hard HP sp3 form. Upon volume decrease, the trigonal C=C parallel segments characterizing glitter-like tfi topology of NP C12 change to crossing C-C segments with the loss of sp2 character accompanied by a large densification…
▽ More
An original mechanism is proposed for a pressure-induced transformation of orthorhombic C12 from ground state normal pressure (NP) sp2/sp3 allotrope to ultra-dense and ultra-hard HP sp3 form. Upon volume decrease, the trigonal C=C parallel segments characterizing glitter-like tfi topology of NP C12 change to crossing C-C segments with the loss of sp2 character accompanied by a large densification with density=3.64 g/cm3, larger than diamond, defining a novel orthorhombic HP C12 with 44T39 topology. The crystal chemistry engineering backed with quantum density functional theory DFT-based calculations let determine the ground state structures and energy derived physical properties. Furthering on that, the E(V) equations of states (EOS) let define the equilibrium NP(E0,V0) allotrope at lower energy and higher volume versus HP(E0, V0) allotrope at higher energy and smaller volume. A potential pressure induced transformation NP to HP was estimated at ~100 GPa, reachable with a diamond anvil cell DAC. Both allotropes were found cohesive and mechanically stable with low and large Vickers hardness magnitudes: HV(tfi C12) =24 GPa and HV(44T39 C12) =90 GPa; the latter being close to diamond hardness (HV ~95 GPa). Besides, both allotropes were found dynamically stable with positive phonon frequencies and a spectroscopic signature of C=C high frequency bands in tfi C12. The electronic band structures show metallic behavior for NP tfi C12 and a small band gap for HP 44T39 C12 letting assign semiconducting properties. The work is meant to open further the scope of C(sp2)and C(sp3) transformation mechanisms that are fundamental in solid state physics and chemistry.
△ Less
Submitted 22 April, 2025;
originally announced April 2025.
-
Original Ultra-hard Orthorhombic Carbon allotropes C8 with lonsdaleite-type lon topology: Crystallographic and DFT investigations
Authors:
Samir F Matar
Abstract:
The lon topology inherent to lonsdaleite C4 hexagonal diamond is shown to characterize three original carbon allotropes C8 in the orthorhombic system with irregular orientations of the C4 tetrahedra. The octacarbon stoichiometries were devised from crystal structure engineering and identified close to lonsdaleite from density functional theory (DFT) based calculations of ground state structures an…
▽ More
The lon topology inherent to lonsdaleite C4 hexagonal diamond is shown to characterize three original carbon allotropes C8 in the orthorhombic system with irregular orientations of the C4 tetrahedra. The octacarbon stoichiometries were devised from crystal structure engineering and identified close to lonsdaleite from density functional theory (DFT) based calculations of ground state structures and energy derived physical properties. Characterized with high densities, the three allotropes are identified with ultra hard with hardness magnitudes close and superior to lonsdaleite. Dynamically, all three allotropes were found stable with positive frequencies revealed from their phonons band structures with specific heat CV = f(T) calculated curves close to diamond experimental values from literature.
△ Less
Submitted 28 January, 2025;
originally announced January 2025.
-
From layered 2D carbon to 3D tetrahedral original allotropes C12 and C18 with physical properties related to diamond: Crystal chemistry and DFT investigations
Authors:
Samir F. Matar
Abstract:
Two mechanisms of changes from 2D to 3D (D = dimensionality) involving 2D C(sp2) trigonal paving to C(sp3) tetrahedral stacking are proposed through puckering of the 2D layers on one hand and interlayer insertion of extra C on the other hand. Such transformations, led to original 3D hexagonal C12 and C18 allotropes respectively characterized by lon and bac topologies. Using density functional theo…
▽ More
Two mechanisms of changes from 2D to 3D (D = dimensionality) involving 2D C(sp2) trigonal paving to C(sp3) tetrahedral stacking are proposed through puckering of the 2D layers on one hand and interlayer insertion of extra C on the other hand. Such transformations, led to original 3D hexagonal C12 and C18 allotropes respectively characterized by lon and bac topologies. Using density functional theory DFT calculations, the two allotropes were found cohesive and stable both mechanically (elastic properties) and dynamically (phonons). Comparisons of the physical properties with known uni C6 were established letting identify ranges of large Vickers hardness: HV (uni C6) = 89 GPa, HV (lon C12) = 97 GPa, and HV (bac C18) = 70 GPa. Whilst C6 was identified with acoustic phonons instability, C12 and C18 were found stable dynamically throughout the acoustic and optic frequency ranges. Furthering on the thermal properties the allotropes were characterized with a temperature dependence curve of the specific heat CV close to experimental data of diamond with best fit for novel C18. The electronic band structures reveal a small band gap of 1 eV for uni C6 and larger direct band gap of 3 eV for the two other 3D allotropes. Such modulations of the electronic and physical properties should open scopes of carbon research.
△ Less
Submitted 29 August, 2024;
originally announced August 2024.
-
DFT investigation of novel cubic carbon allotrope, yne-C$_{16}$
Authors:
Samir F Matar
Abstract:
Novel cubic allotrope yne-C$_{16}$ with sp$^3$/sp$^1$ carbon hybridizations is devised based on crystal chemistry and computations of the ground structure and the energy-dependent quantities within the quantum density functional theory DFT. With respect to srs-C8 characterized by trigonal C(sp$^2$), yne-C$_{16}$ is identified with original C -- C triple bond-like units and distorted tetrahedra. Th…
▽ More
Novel cubic allotrope yne-C$_{16}$ with sp$^3$/sp$^1$ carbon hybridizations is devised based on crystal chemistry and computations of the ground structure and the energy-dependent quantities within the quantum density functional theory DFT. With respect to srs-C8 characterized by trigonal C(sp$^2$), yne-C$_{16}$ is identified with original C -- C triple bond-like units and distorted tetrahedra. The new allotrope is qualified with unknown topology. At the elementary building unit, C$_{16}$ looks like a pyramidal molecule such as :PCl3, with ":" symbolizing the phosphorous lone pair. With this conceptualization C$_{16}$ has three bond pairs (SIGMA-like) making the pyramid base and the C(triple-bond)C with large PI character resembling phosphorous electron lone pair (:) at the apex of the pyramid. The new allotrope was found cohesive and stable both mechanically (positive elastic constants) as well as dynamically (phonons band structure). C$_{16}$ is characterized with a weakly metallic character.
△ Less
Submitted 20 July, 2024;
originally announced July 2024.
-
Superhard lon C5 and derived carbon nitrides: C4N and C2N2. Crystal chemistry and first principles DFT studies
Authors:
Samir F Matar
Abstract:
Super-hard C5 with lon topology (lon: Lonsdaleite hexagonal diamond) and characterized by the presence of sp3 and sp2 -like carbon sites is devised from crystal chemistry and used as template matrix structure for identifying original carbonitrides C4N and C2N2 with lon topology except for the equiatomic belonging to a new topology (3,4L147). The steric effect of N(2s2) lone pair is highlighted in…
▽ More
Super-hard C5 with lon topology (lon: Lonsdaleite hexagonal diamond) and characterized by the presence of sp3 and sp2 -like carbon sites is devised from crystal chemistry and used as template matrix structure for identifying original carbonitrides C4N and C2N2 with lon topology except for the equiatomic belonging to a new topology (3,4L147). The steric effect of N(2s2) lone pair is highlighted in C2N2 in inducing an original structure of largely separated two-layered stacking of tetrahedra. The investigations based on crystal chemistry were backed by computations within the quantum density functional theory DFT. All systems were found cohesive and both mechanically (elastic constants) and dynamically (phonons band structures) stable. Super hardness characterizes the carbon allotrope C5 and the nitrides C4N and C2N2. Metallic-like conductivities and insulating characters were identified.
△ Less
Submitted 2 April, 2024;
originally announced April 2024.
-
Original orthorhombic tetrahedral and trigonal hybrid allotropes Cn with n= 8, 10, 12, 14 possessing ethene -like and propadiene -like units: Crystal chemistry and first principles
Authors:
Samir F. Matar
Abstract:
Original carbon allotropes, orthorhombic C8, C10, C12 and C14 presenting mixed sp2 and sp3 carbon hybridizations exhibiting ethene like and propadiene like embedded units are proposed from crystal chemistry and calculations within the quantum density functional theory DFT. The carbon allotropes with topologies related with jeb, mog, as well as new topologies, show alternating tetrahedral and trigo…
▽ More
Original carbon allotropes, orthorhombic C8, C10, C12 and C14 presenting mixed sp2 and sp3 carbon hybridizations exhibiting ethene like and propadiene like embedded units are proposed from crystal chemistry and calculations within the quantum density functional theory DFT. The carbon allotropes with topologies related with jeb, mog, as well as new topologies, show alternating tetrahedral and trigonal carbon stacking along the a orthorhombic direction (vertical) close to but different from isoglitter. The carbon allotropes were shown to be cohesive and stable both mechanically (elastic properties) and dynamically (phonons), with calculated Vickers hardness (HV) magnitudes ranging between 25 GPa and 52 GPa, the latter magnitude assigned to C12 possessing the largest number of tetrahedral versus trigonal stacking. High phonon frequencies close to 50 THz were attributed to stretching mode of ethene (in C8 and C12) and propadiene (in C10 and C14) components with good agreement with experiment for Raman molecular C double bond C intense stretching mode. Frequencies close to 40 THz were proposed as signatures of C...C simple bonds in the tetrahedra. The electronic band structure and electronic density of states DOS shown exemplarily for C8 point to metallic-like behavior assigned to the itinerant role of trigonal carbon pi-electrons.
△ Less
Submitted 23 February, 2024;
originally announced February 2024.
-
Evolution from quartz (qtz) to diamond (dia) carbon allotropes: Crystal engineering and DFT investigations
Authors:
Samir F. Matar
Abstract:
Based on crystal engineering and density functional theory DFT calculations a transformational pathway is proposed from qtz (quartz-based) topology characterized by distorted tetrahedra to dia (diamond-like) regular tetrahedra topology. The protocol consists of carbon insertions into orthorhombic (space group P222, No. 16) within C5, C6, and C7, leading to ultimate C8 identified as diamond-like. T…
▽ More
Based on crystal engineering and density functional theory DFT calculations a transformational pathway is proposed from qtz (quartz-based) topology characterized by distorted tetrahedra to dia (diamond-like) regular tetrahedra topology. The protocol consists of carbon insertions into orthorhombic (space group P222, No. 16) within C5, C6, and C7, leading to ultimate C8 identified as diamond-like. The induced structural and physical changes are assessed with elastic properties pointing to ultra hardness, larger for qtz-C6 than dia-C8, whilst intermediate C7 is compressible due to its diamond-defective structure. The dynamic stability was shown from the phonons, and thermodynamic quantities as the specific heat CV was addressed in comparison with diamond experimental data. The electronic band structures reveal semi-conducting C6, metallic C7 characterized by diamond-defect structure, and insulating C8.
△ Less
Submitted 12 November, 2023;
originally announced November 2023.
-
Novel Carbon allotropes with mixed hybridizations: ene-C10, and ene-yne-C14. Crystal chemistry and first principles investigations
Authors:
Samir F. Matar
Abstract:
Based on C8, carbon 4C, with cfc topology, two hybrid carbon allotropes generated by inserting C(sp2) and C(sp1) carbon atoms into C8 diamond-like lattice were identified and labeled ene-C10 containing C(sp2) and ene-yne-C14 containing C(sp2 and sp1). The introduced double and triple chemical descriptions were illustrated from the projected charge densities. The crystal density and the cohesive en…
▽ More
Based on C8, carbon 4C, with cfc topology, two hybrid carbon allotropes generated by inserting C(sp2) and C(sp1) carbon atoms into C8 diamond-like lattice were identified and labeled ene-C10 containing C(sp2) and ene-yne-C14 containing C(sp2 and sp1). The introduced double and triple chemical descriptions were illustrated from the projected charge densities. The crystal density and the cohesive energy were found to decrease due to the enhanced openness of the structures from inserted sp2/sp1 carbons, with a resulting decrease of the hardness along the series C8, C10, C12, and C14. The novel hybrid allotropes were found stable mechanically (elastic constants and their combinations) and dynamically (phonons band structures). The thermal properties from the temperature dependence of the heat capacity CV were found to increasingly depart from diamond-like C8 to higher values. From the electronic band structures, the inserted carbons were found to add up bands rigidly to diamond-like C8 while being characterized by metallic-like behavior for ene-C10 and ene-yne-C14.
△ Less
Submitted 10 July, 2023;
originally announced July 2023.
-
Ultra-hard hexagonal C$_{12}$ with C3 cyclopropane-like moiety from first principles
Authors:
Samir F. Matar
Abstract:
A novel carbon allotrope, hexagonal C12, is proposed from crystal chemistry and quantum density functional theory DFT calculations of ground state and physical properties. The structure exhibits corner sharing distorted tetrahedra with the presence of C3 triangular cyclopropane-like moiety connecting planar carbon. C12 allotrope is found cohesive and stable both mechanically (elastic constants and…
▽ More
A novel carbon allotrope, hexagonal C12, is proposed from crystal chemistry and quantum density functional theory DFT calculations of ground state and physical properties. The structure exhibits corner sharing distorted tetrahedra with the presence of C3 triangular cyclopropane-like moiety connecting planar carbon. C12 allotrope is found cohesive and stable both mechanically (elastic constants and their combinations) and dynamically -- phonons band structures -- and presents ultra-hardness with Vickers number of 70 GPa. The temperature dependence of the heat capacity CV shows close magnitudes to experimental results of diamond. The electronic band structure reveals closely insulating behavior with 2.5 eV band gap, half smaller than in diamond.
△ Less
Submitted 15 June, 2023;
originally announced June 2023.
-
Superglitter and squarodiamond, novel C12 (sp2/sp3) and C16 (sp3) allotropes from first principles
Authors:
Samir F Matar
Abstract:
Original carbon allotropes C12 and C16 called superglitter and squarodiamond from relationships with literature glitter and squaroglitter respectively are shown through DFT-based geometry to be cohesive with energy dependent properties as hardness from the elastic constants, the phonon band structures, and thermal behavior related to diamond. Like C6 glitter, C12 superglitter exhibiting mixed sp2-…
▽ More
Original carbon allotropes C12 and C16 called superglitter and squarodiamond from relationships with literature glitter and squaroglitter respectively are shown through DFT-based geometry to be cohesive with energy dependent properties as hardness from the elastic constants, the phonon band structures, and thermal behavior related to diamond. Like C6 glitter, C12 superglitter exhibiting mixed sp2-sp3 carbon hybridization shows metallic behavior and moderate hardness and metallic behavior arising from trigonal C(sp2) forming C=C pairs connecting tetrahedra. Oppositely, C16 showing square C4 motifs as in squaroglitter characterized by both sp2-sp3 carbons, is characterized by edge and corner sharing tetrahedra with only sp3 carbons resulting in insulating behavior and shear modulus and Vickers hardness H(V) larger than 100 GPa as well as heat capacity alike diamond, whence its labeling as squarodiamond. The novel carbon allotropes are proposed as an opportunity to enrich the carbon database and the materials science with potentials of applications as abrasives and in electronic devices.
△ Less
Submitted 7 April, 2023; v1 submitted 4 April, 2023;
originally announced April 2023.
-
C5 as simplest ultrahard allotrope with mixed sp2/sp3 carbon hybridizations from first principles
Authors:
Samir F Matar
Abstract:
From crystal chemistry rationale and density functional DFT calculations, novel tetragonal carbon C5 is proposed as simplest ultrahard allotrope with mixed hybrid carbon hybridizations (sp2 - sp3). Novel pentacarbon is identified as cohesive and stable both dynamically and mechanically. Whereas charge density is localized about tetrahedral C-sp3, it is found delocalized around trigonal C-sp2 resul…
▽ More
From crystal chemistry rationale and density functional DFT calculations, novel tetragonal carbon C5 is proposed as simplest ultrahard allotrope with mixed hybrid carbon hybridizations (sp2 - sp3). Novel pentacarbon is identified as cohesive and stable both dynamically and mechanically. Whereas charge density is localized about tetrahedral C-sp3, it is found delocalized around trigonal C-sp2 resulting in metallic behavior. The anisotropic structure characteristics caused by the aligned trigonal carbon along the tetragonal c-axis provide high Vickers hardness with a magnitude close to diamond
△ Less
Submitted 9 October, 2022;
originally announced October 2022.
-
First principles investigations in the carbon silicon system of novel tetragonal C8 (diamond) and Si8 allotropes and binary Si4C4 phase
Authors:
Samir F. Matar
Abstract:
Novel extended networks of C8, Si8 and silicon carbide Si4C4 are proposed based on crystal chemistry rationale and optimized structures to ground state energies and derived physical properties within the density functional theory (DFT). The two carbon and silicon allotropes and the silicon carbide belong to primitive tetragonal space group P-4m2 Number 115. C8 allotrope structure made of corner sh…
▽ More
Novel extended networks of C8, Si8 and silicon carbide Si4C4 are proposed based on crystal chemistry rationale and optimized structures to ground state energies and derived physical properties within the density functional theory (DFT). The two carbon and silicon allotropes and the silicon carbide belong to primitive tetragonal space group P-4m2 Number 115. C8 allotrope structure made of corner sharing C4 and Si4 tetrahedra is illustrated by charge density projections exhibiting sp3 like carbon hybridization. From careful symmetry analysis, Symmetry analysis of C8 indicated that it is another representation of cubic diamond, space group F-d3m Number 227. C8 is identified as ultra-hard with a similar magnitude of Vickers hardness. The interest in C8 is to serve as template to study Si8 and Si-C binary. Si8 allotrope is found soft with HV =13 GPa alike cubic Si, and Si4C4 is identified with HV =33 GPa close to experimental SiC. All three new phases are mechanically (elastic constants) and dynamically (phonons) stable, and their electronic band structures are characteristic of insulating C8 (diamond) with large band gaps of about 5 eV, and semi-conducting Si8 and Si4C4 with band gaps of about 1 eV.
△ Less
Submitted 5 September, 2022; v1 submitted 21 July, 2022;
originally announced July 2022.
-
Novel Ultra-hard tetragonal Octacarbon C8 close to Diamond from First Principles
Authors:
Samir F. Matar
Abstract:
Novel ultra-hard carbon allotrope is proposed with mechanical, dynamic, and thermal properties like diamond. Based on energy criteria from computations within density functional theory DFT, tetragonal C8 stoichiometry is identified as a cohesive network of corner sharing C4 tetrahedra illustrated by charge density projections exhibiting sp3-like carbon hybridization. The new allotrope is mechanica…
▽ More
Novel ultra-hard carbon allotrope is proposed with mechanical, dynamic, and thermal properties like diamond. Based on energy criteria from computations within density functional theory DFT, tetragonal C8 stoichiometry is identified as a cohesive network of corner sharing C4 tetrahedra illustrated by charge density projections exhibiting sp3-like carbon hybridization. The new allotrope is mechanically (elastic constants) and dynamically (phonons) stable, exhibiting thermal properties (heat capacity CV) in close agreement with experimental data of diamond from the literature. From the used models to evaluate Vickers hardness, a larger magnitude with respect diamond is hypothesized for the new allotrope. Electronic band structure calculations show insulating behavior with large band gap of 5 eV like diamond.
△ Less
Submitted 12 September, 2022; v1 submitted 13 June, 2022;
originally announced June 2022.
-
Tricarbon: two novel ultra-hard metallic carbon allotropes from first-principle calculations
Authors:
Samir F. Matar,
Jean Etourneau,
Vladimir L. Solozhenko
Abstract:
Based on crystal chemistry considerations and quantum density functional theory ground state calculations, rhombohedral rh-C3 and hexagonal h-C6 carbon allotropes are proposed and energetically calculated as new stable ultra-hard phases likewise lonsdaleite. Along the two kinds of carbon in linear C2-C1-C2 lattice, distorted tetrahedra C2(sp3) with an angle of 106.17° (smaller than ideal 109.4°) a…
▽ More
Based on crystal chemistry considerations and quantum density functional theory ground state calculations, rhombohedral rh-C3 and hexagonal h-C6 carbon allotropes are proposed and energetically calculated as new stable ultra-hard phases likewise lonsdaleite. Along the two kinds of carbon in linear C2-C1-C2 lattice, distorted tetrahedra C2(sp3) with an angle of 106.17° (smaller than ideal 109.4°) and C1(sp)-like hybridizations are inferred from charge density projections. The calculated elastic constants point to a strong anisotropy of mechanical properties of rh-C3 and h-C6 with an exceptionally large C33 values (1636 GPa and 1610 GPa, respectively), exceeding that of lonsdaleite (1380 GPa), due to the presence of aligned tricarbon units along the hexagonal c-axis. Both phases are characterized by large bulk moduli and high hardness values that are slightly less than those of lonsdaleite and diamond. Weak metallic behavior of both new phases is identified from electronic band structure calculations.
△ Less
Submitted 12 June, 2021;
originally announced June 2021.
-
Crystal chemistry and ab initio investigations of ultra-hard dense rhombohedral carbon and boron nitride
Authors:
Samir F. Matar,
Vladimir L. Solozhenko
Abstract:
Rhombohedral dense forms of carbon, rh-C2 (or hexagonal h-C6), and boron nitride, rh-BN (or hexagonal h-B3N3), are derived from rhombohedral 3R graphite based on original crystal chemistry scheme backed with full cell geometry optimization to minimal energy ground state computations within the quantum density functional theory. Considering throughout hexagonal settings featuring extended lattices,…
▽ More
Rhombohedral dense forms of carbon, rh-C2 (or hexagonal h-C6), and boron nitride, rh-BN (or hexagonal h-B3N3), are derived from rhombohedral 3R graphite based on original crystal chemistry scheme backed with full cell geometry optimization to minimal energy ground state computations within the quantum density functional theory. Considering throughout hexagonal settings featuring extended lattices, the calculation of the hexagonal set of elastic constants, provide results of large bulk moduli i.e. B0(rh-C2) = 438 GPa close to that of diamond, and B0(rh-BN) = 369 GPa close to that of cubic BN. The hardness assessment in the framework of three contemporary models enables both phases to be considered as ultra-hard. From the electronic band structures calculated in the hexagonal Brillouin zones, 3R graphite is a small-gap semiconductor, oppositely to rh-C2 that is characterized by a large band gap close to 5 eV, as well as the two BN phases.
△ Less
Submitted 22 April, 2021;
originally announced April 2021.
-
B12C2N Interstitial Boron subcarbonitride with peculiar magnetic properties: First principles investigations
Authors:
Samir F. Matar
Abstract:
The subcarbides B12C3 and B13C2 known for their abrasive properties, can be structurally considered as carbon inserted rhombohedral alpha-B12 and expressed as B12{C-C-C} and B12(C-B-C). Using density functional theory DFT computations, the substitution of the central atom in the linear triatomic interstitials by N leads to an original new boron subcarbonitride B12C2N or B12(C-N-C) identified as sl…
▽ More
The subcarbides B12C3 and B13C2 known for their abrasive properties, can be structurally considered as carbon inserted rhombohedral alpha-B12 and expressed as B12{C-C-C} and B12(C-B-C). Using density functional theory DFT computations, the substitution of the central atom in the linear triatomic interstitials by N leads to an original new boron subcarbonitride B12C2N or B12(C-N-C) identified as slightly more cohesive than the two subcarbides. While B12C3 is insulating with a E(Gap) close to 0.2 eV, and B13C2 a weak metal with small density of state DOS at the Fermi level, B12C2N ground state is a half-metallic ferromagnet with M= 1 BM. From the equation of state, the magnetization is found unchanged over a broad volume range around equilibrium. Total and magnetic charge density projections, in accordance with charge transfer calculations, show the charge envelopes to be concentrated on (C:N:C) and the magnetic charge having the shape of a torus centered on N. The triatomic interstitials interact through terminal carbons specifically with one of the two boron substructures of alpha-B12 forming 3B1-C-N-C-3B1-like complex. Further syntheses and experimental characterizations are expected to extend the field of investigation of such an original class of materials.
△ Less
Submitted 6 April, 2021;
originally announced April 2021.
-
Ultra-hard rhombohedral carbon from crystal chemistry rationale and first principles
Authors:
Samir F. Matar,
Vladimir L. Solozhenko
Abstract:
A new ultra-hard rhombohedral carbon rh-C4 (or hexagonal h-C12) is reported as derived from 3R graphite through crystal chemistry construction and ground state energy within the density functional theory. An extended hexagonal three-dimensional network of h-C12 is formed of C4 tetrahedra alike in h-C4 lonsdaleite (hexagonal diamond). The electronic band structure of rh-C4 is characteristic of insu…
▽ More
A new ultra-hard rhombohedral carbon rh-C4 (or hexagonal h-C12) is reported as derived from 3R graphite through crystal chemistry construction and ground state energy within the density functional theory. An extended hexagonal three-dimensional network of h-C12 is formed of C4 tetrahedra alike in h-C4 lonsdaleite (hexagonal diamond). The electronic band structure of rh-C4 is characteristic of insulator with Egap = 4 eV similarly to diamond. From the set of elastic constants a larger value of bulk modulus versus lonsdaleite, and the largest Vickers hardness (HV) versus both forms of diamond were derived.
△ Less
Submitted 2 April, 2021;
originally announced April 2021.
-
Crystal chemistry and ab initio prediction of ultra-hard rhombohedral B2N2 and BC2N
Authors:
Samir F. Matar,
Vladimir L. Solozhenko
Abstract:
New ultra-hard rhombohedral B2N2 and BC2N - or hexagonal B6N6 and B3C6N3 - are derived from 3R graphite based on crystal chemistry rationale schematizing a mechanism for 2D => 3D transformation. Full unconstrained geometry optimizations leading to ground state energy structures and energy derived quantities as energy-volume equation of states (EOS) were based on computations within the density fun…
▽ More
New ultra-hard rhombohedral B2N2 and BC2N - or hexagonal B6N6 and B3C6N3 - are derived from 3R graphite based on crystal chemistry rationale schematizing a mechanism for 2D => 3D transformation. Full unconstrained geometry optimizations leading to ground state energy structures and energy derived quantities as energy-volume equation of states (EOS) were based on computations within the density functional theory (DFT) with generalized gradient approximation (GGA) for exchange-correlation (XC) effects. The new binary and ternary phases are characterized by tetrahedral stacking alike diamond, visualized with charge density representations, and illustrating ion characters. Atom averaged total energies are similar between cubic BN and rh-B2N2 on one hand, and larger stabilization of rhombohedral BC2N versus cubic and orthorhombic forms (in literature assessed from favored C-C and B-N bonding), on the other hand. The electronic band structures are characteristic of insulators with Egap ~ 5 eV. Both phases are characterized by large bulk and shear moduli and very high hardness values i.e. HV(rh-B2N2) = 74 GPa and HV(rh-BC2N) = 87 GPa.
△ Less
Submitted 11 March, 2021;
originally announced March 2021.
-
First principles investigations of electronic and magnetic properties of new rh.-B12N3
Authors:
Samir F. Matar
Abstract:
Considering rhombohedral alpha-boron, rh-B12 as a matrix hosting interstitials particularly triatomic linear ones as in B12C3 better known as B4C, the subnitride B12N3 is proposed herein. The N3 triatomic linear alignment labeled N2-N1-N2 resembles that found in the ionic sodium azide NaN3 characterized by a very short d(N1-N2)= 1.16 A. Within DFT-based calculations B12N3 is found more cohesive th…
▽ More
Considering rhombohedral alpha-boron, rh-B12 as a matrix hosting interstitials particularly triatomic linear ones as in B12C3 better known as B4C, the subnitride B12N3 is proposed herein. The N3 triatomic linear alignment labeled N2-N1-N2 resembles that found in the ionic sodium azide NaN3 characterized by a very short d(N1-N2)= 1.16 A. Within DFT-based calculations B12N3 is found more cohesive than pristine B12 with larger inter-nitrogen separation of d(N1-N2)= 1.38 A}. The N1-N2 elongation is explained from the bonding of the two terminal N2 with one of the two B12 boron substructures forming 3B-N2-N1-N2-3B-like complex. A resulting non-bonding charge density localized on central N1 leads to the onset of a magnetic moment of 1 Bohr Magneton in a half-metal ferromagnetic ground state illustrated by projections of the magnetic charge density and the site and spin electronic density of states DOS.
△ Less
Submitted 8 October, 2020;
originally announced October 2020.
-
First-principles studies of the electronic and magnetic structures and bonding properties of boron subnitride B$_{13}$N$_2$
Authors:
Samir F. Matar,
Vladimir L. Solozhenko
Abstract:
Rhombohedral B$_{12}$ unit is viewed as a host matrix embedding linear tri-atomic arrangements of elements (E) resulting in a relatively large family of boron-rich compounds with B$_{12}${E-E-E} generic formulation. The present work focuses on boron subnitride, B$_{13}$N$_2$ that we express in present context as B$_{12}${N-B-N}. Within well established quantum density functional theory (DFT) a ful…
▽ More
Rhombohedral B$_{12}$ unit is viewed as a host matrix embedding linear tri-atomic arrangements of elements (E) resulting in a relatively large family of boron-rich compounds with B$_{12}${E-E-E} generic formulation. The present work focuses on boron subnitride, B$_{13}$N$_2$ that we express in present context as B$_{12}${N-B-N}. Within well established quantum density functional theory (DFT) a full study of its electronic properties is provided. Also linear triatomic arrangements in view of the existence in simple compounds such as sodium azide NaN$_3$, i.e., Na$^I${N-N-N} and calcium cyanamide, Ca$^{II}${N-C-N}, we devised Sc$^{III}${N-B-N} to establish comparison with B$_{12}${N-B-N}. ScBN$_2$ is calculated to be cohesive and possessing N-B-N isolated from ScIII with dB-N = 1.33 Å. In B$_{12}${N-B-N} an elongated dB-N=1.43 Å is identified due to the bonding of N with one of the two B12 boron substructures, B1 with the formation of "3B...N-B-N...3B"-like complex accompanied by a magnetic instability. Spin polarized (SP) calculations led to the onset of magnetization on central boron with M=1 $μ_B$ in a stable half-ferromagnetic ground state observed from the electronic density of states (DOS). The results are backed with total energy and calculations in both non-spin-polarized (NSP) and spin-polarized stabilizing the latter configuration over a broad range of volumes from M(V) plots. Further illustrative results are given with the charge densities (total and magnetic) and electron localization function (ELF).
△ Less
Submitted 20 August, 2020;
originally announced August 2020.
-
Electronic and magnetic properties of diiron in extended carbon networks Fe2C6 and Fe2C12 from first principles
Authors:
Samir F. Matar
Abstract:
From density functional DFT investigations helped with crystal chemistry rationale, diiron (pairs of Fe), mostly known in molecular diiron nona-carbonyl Fe2(CO)9 and diiron-mono-carbide Fe2C carbide, are embedded in hexagonal C6 substructures. Generated Fe2C6 and Fe2C12 are shown to be more cohesive than the mono-carbide on one hand, and increasingly cohesive from hexa- C6 to dodeca- C12 on the ot…
▽ More
From density functional DFT investigations helped with crystal chemistry rationale, diiron (pairs of Fe), mostly known in molecular diiron nona-carbonyl Fe2(CO)9 and diiron-mono-carbide Fe2C carbide, are embedded in hexagonal C6 substructures. Generated Fe2C6 and Fe2C12 are shown to be more cohesive than the mono-carbide on one hand, and increasingly cohesive from hexa- C6 to dodeca- C12 on the other hand. From energy differences, the ground state is spin-polarized SP, versus a non-spin-polarized NSP configuration, and identified as ferromagnetic versus a higher energy anti-ferromagnetic hypothesis. The projection of the magnetic charge density on Fe and C, shows that only Fe carries the magnetic moment, while carbon receives charges from Fe as illustrated by the electron localization function ELF 3D and 2D mapping. SP configuration induces an enlarged c/a hexagonal ratio, versus NSP, while a(hex.) remains constant thanks to the rigid C6 carbon substructure network, resulting in an anisotropic magneto-volume response. This feature, essentially due to in-plane diiron, is discussed from the energy-volume (E, V) NSP and SP equations of state EOS and derived quantities like volume- and d(Fe-Fe)- changes of the magnetization.
△ Less
Submitted 8 April, 2020;
originally announced April 2020.
-
C-2p spin-polarizations along with two mechanisms in extended carbon multilayers: Insight from first principles
Authors:
Samir F Matar
Abstract:
From density functional theory investigations helped with crystal chemistry rationale, single-atom C, embedded in layered hexagonal CCn with n = 6, 12, 18 networks, is stable in a magnetic state with M(C)= 2 Bohr Magneton (BM). The examined compositions, all inscribed within the P6/mmm 191 space group are characterized as increasingly cohesive with n, figuring mono, bi and tri layered honeycomb-li…
▽ More
From density functional theory investigations helped with crystal chemistry rationale, single-atom C, embedded in layered hexagonal CCn with n = 6, 12, 18 networks, is stable in a magnetic state with M(C)= 2 Bohr Magneton (BM). The examined compositions, all inscribed within the P6/mmm 191 space group are characterized as increasingly cohesive with n, figuring mono, bi and tri layered honeycomb-like C networks respectively. The spin projected total density of states shows a closely half-metallic behavior with a gap at minority spins and metallic majority spins. Such results together with the large C-C intersite separation and the integer 2 BM magnetization, let propose an intra-band mechanism of magnetic moment onset on carbon 2p states. Support is provided from complementary calculations assuming C2C12 structure with planar 2 C with d(C-C)= 2.46 Angstroms resulting into a lowering of the magnetization down to 0.985 BM per C atom involving a ferromagnetic order arising from interband spin polarization on C where one nonbonding spin polarizes whereas the other is involved with the bonding with the other carbon. Further illustrative proofs are provided with the magnetic charge density projected onto the different atoms, showing its prevalence around C, contrary to the C6 layers, as well as electron localization function ELF.
△ Less
Submitted 29 December, 2019;
originally announced December 2019.
-
Electronic and magnetic properties of new binary uranium-boron compounds with 2D and 3D boron networks: A revisit of the U:B system
Authors:
Samir F. Matar
Abstract:
Based on crystal chemistry rationale and calculations within the density functional theory DFT, the U:B system is complemented with additional binary compounds UB3, U2B6, and UB6 possessing two-dimensional 2D and 3D boron substructures. Observations are supported quantitatively with the trends of cohesive energies, charge transfers onto the boron sub-lattice and geometry optimized structures. The…
▽ More
Based on crystal chemistry rationale and calculations within the density functional theory DFT, the U:B system is complemented with additional binary compounds UB3, U2B6, and UB6 possessing two-dimensional 2D and 3D boron substructures. Observations are supported quantitatively with the trends of cohesive energies, charge transfers onto the boron sub-lattice and geometry optimized structures. The results point out to a structure crossover from hexagonal (layer B network) to 3D boron network at compositions above UB3 found to be connected with a threshold amount of charge onto boron which is ~0.46. From the energy-volume of states EOS considering spin degenerate and spin-polarized configurations, hexagonal UB3, and cubic UB6 were found in a stable ferromagnetic ground state with 1.47 and 2.40Bohr Magnetons spin-only moments. The volume variations of magnetization show respectively a smooth and abrupt evolution for UB3 and UB6.
△ Less
Submitted 11 December, 2019;
originally announced December 2019.
-
New 3D and 2D Octacarbon C8 and isoelectronic B4N4 having peculiar mechanic and magnetic properties. First-principles identifications
Authors:
Samir F Matar
Abstract:
Cohesive energies, energy-volume equations of states EOS, electron localization ELF maps, elastic constants, and band structures are reported for original octacarbon C8 three dimensional 3D and two-dimensional 2D chemical systems based on density functional theory calculations. Specifically, tetragonal C8 is identified cohesive with hardness close to experimentally identified cubic Ia-3 C8; both e…
▽ More
Cohesive energies, energy-volume equations of states EOS, electron localization ELF maps, elastic constants, and band structures are reported for original octacarbon C8 three dimensional 3D and two-dimensional 2D chemical systems based on density functional theory calculations. Specifically, tetragonal C8 is identified cohesive with hardness close to experimentally identified cubic Ia-3 C8; both exhibiting comparable hardness to diamond. Also, isoelectronic and isostructural B4N4 is calculated with a slightly lower hardness due to the ionocovalent B-N bonding and a bandgap with the same magnitude as Diamond. 2D-C8 on the other side is proposed with interpenetrating two carbon hexagonal substructures, identified from energy calculations as stable in a ferromagnetic ground state. Critical pressure for the collapse of magnetization PC=12 GPa let assign a soft ferromagnetic behavior alike Invar alloys. Electronic band structures analyses identify specific bands differentiating magnetic carbon substructure (C1) from nonmagnetic semi-conducting honeycomb-like C26 layers. These observations let propose spin chemistry perspectives once such multilayered carbon 2D compounds are grown as stand-alone or on selected substrates as thin or thick films
△ Less
Submitted 25 August, 2019;
originally announced August 2019.
-
Lattice phonon modes of the spin crossover crystal [Fe(phen)2(NCS)2] studied by THz, IR, Raman spectroscopies and DFT calculations
Authors:
Eric Collet,
Giovanni Azzolina,
Tomoaki Ichii,
Laurent Guerin,
Roman Bertoni,
Alain Moreac,
Marco Cammarata,
Nathalie Daro,
Guillaume Chastanet,
Jacek Kubicki,
Koichiro Tanaka,
Samir F. Matar
Abstract:
[Fe(phen)2(NCS)2] is a prototype transition metal complex material, which undergoes a phase transition between low-spin (LS) and high-spin (HS) phases, induced by temperature, pressure or light. Vibrational modes play a key role for spin-state switching both in thermal and photo-induced cases, by contributing to vibrational entropy for thermal equilibrium transitions or driving the fast structural…
▽ More
[Fe(phen)2(NCS)2] is a prototype transition metal complex material, which undergoes a phase transition between low-spin (LS) and high-spin (HS) phases, induced by temperature, pressure or light. Vibrational modes play a key role for spin-state switching both in thermal and photo-induced cases, by contributing to vibrational entropy for thermal equilibrium transitions or driving the fast structural trapping of the photoinduced high spin state. Here we study the crystal phonon modes of [Fe(phen)2(NCS)2], by combining THz, IR, and Raman spectroscopies sensitive to modes in different frequency ranges and different symmetries. We compare the experimental results to DFT calculations performed in a periodic 3D crystal for understanding the phonon modes in the crystal, compared to molecular vibrations. Indeed, each vibrational mode of the isolated molecule combines into several modes of different symmetry and frequency in the crystal, as the unit cell contains four molecules. We focus our attention on the HS symmetric and anti-symmetric breathing modes in the crystal as well as on the N-CS stretching modes.
△ Less
Submitted 23 October, 2018;
originally announced October 2018.
-
Electronic structure and magnetic ordering of NiN and Ni$_2$N from first principles
Authors:
Abdesalem Houari,
Samir F. Matar,
Volker Eyert
Abstract:
The results of first-principles electronic structure calculations for the nitrogen-rich nickel nitrides $ {\rm NiN} $ and $ {\rm Ni_2N} $ are presented. The calculations are based on density functional theory and used the generalized gradient approximation (GGA) as well as the GGA$ +U $ approach. The latter turned out to be crucial for a correct description of the crystal phase stability and magne…
▽ More
The results of first-principles electronic structure calculations for the nitrogen-rich nickel nitrides $ {\rm NiN} $ and $ {\rm Ni_2N} $ are presented. The calculations are based on density functional theory and used the generalized gradient approximation (GGA) as well as the GGA$ +U $ approach. The latter turned out to be crucial for a correct description of the crystal phase stability and magnetic instabilities of both compounds. While for $ {\rm NiN} $ GGA calculations predict a non-magnetic ground state with the zincblende structure, GGA$ +U $ calculations result in a half-metallic ferromagnet with the rocksalt structure in line with indications from the neighboring transition-metal nitrides making $ {\rm NiN} $ a possible candidate for spin-filter devices. For $ {\rm Ni_2N} $ GGA calculations likewise lead to a non-magnetic behavior, which is contrasted with a ferrimagnetic ordering obtained from the GGA$ +U $ approach. This ground state results from complex three-dimensional exchange interaction via $ σ$-type and $ π$-type overlap of the Ni $ 3d $ orbitals with the N $ 2p $ orbitals and may explain the reported sensitivity of the magnetic ordering to details of the crystal structure. For both nitrides, experimental data are called for to confirm our predictions.
△ Less
Submitted 24 November, 2018; v1 submitted 12 October, 2018;
originally announced October 2018.
-
Peculiar magnetic properties of NC6 and NC12 layered compounds from first principles
Authors:
Samir F Matar
Abstract:
In the context of characterizing nitrogen poor carbo-nitrides for different applications, identification of an unusual onset of spin polarization of N(p) states has been shown. A full saturation up to 3 Bohr magnetons is demonstrated in extended two-dimensional carbon networks of C6N and C12N hexagonal structures refined based on density functional theory calculations. From establishing the energy…
▽ More
In the context of characterizing nitrogen poor carbo-nitrides for different applications, identification of an unusual onset of spin polarization of N(p) states has been shown. A full saturation up to 3 Bohr magnetons is demonstrated in extended two-dimensional carbon networks of C6N and C12N hexagonal structures refined based on density functional theory calculations. From establishing the energy-volume equations of states in both compounds assuming spin degenerate (non spin polarized) and spin-polarized configurations, the ground state is identified as ferromagnetic. The variation of magnetization with volume points to strongly ferromagnetic behavior
△ Less
Submitted 12 April, 2018;
originally announced April 2018.
-
First principles investigations of electronic, magnetic and bonding peculiarities of uranium nitride-fluoride UNF
Authors:
Samir F Matar
Abstract:
Based on geometry optimization and magnetic structure investigations within density functional theory, unique uranium nitride fluoride UNF, isoelectronic with UO2, is shown to present peculiar differentiated physical properties. Such specificities versus the oxide are related with the mixed anionic sublattices and the layered-like tetragonal structure characterized by covalent like [U2N2]2+motifs…
▽ More
Based on geometry optimization and magnetic structure investigations within density functional theory, unique uranium nitride fluoride UNF, isoelectronic with UO2, is shown to present peculiar differentiated physical properties. Such specificities versus the oxide are related with the mixed anionic sublattices and the layered-like tetragonal structure characterized by covalent like [U2N2]2+motifs interlayered by ionic like [F2]2- ones and illustrated herein with electron localization function graphs. Particularly the ionocovalent chemical picture shows, based on overlap population analyses, stronger U-N bonding versus N-F and d(U-N) < d(U-F) distances. Based on LDA+U calculations the ground state magnetic structure is insulating antiferromagnet with 2 Bohr Magnetons magnetization per magnetic subcell and ~2 eV band gap.
△ Less
Submitted 11 May, 2017;
originally announced May 2017.
-
Drastic changes of electronic structure and crystal chemistry upon oxidation of SnII2TiO4E2 into SnIV2TiO6: an ab initio study
Authors:
Samir F. Matar,
Mario Maglione,
Michel Nakhl,
Charbel Kfoury,
Jean Etourneau
Abstract:
From DFT based calculations establishing energy-volume equations of state and electron localization mapping, the electronic structure and crystal chemistry changes from Sn2TiO4 to Sn2TiO6 by oxidation are rationalized; the key effect being the destabilization of divalent tin SnII towards tetravalent state SnIV leading to rutile Sn2TiO6 as experimentally observed. The subsequent electronic structur…
▽ More
From DFT based calculations establishing energy-volume equations of state and electron localization mapping, the electronic structure and crystal chemistry changes from Sn2TiO4 to Sn2TiO6 by oxidation are rationalized; the key effect being the destabilization of divalent tin SnII towards tetravalent state SnIV leading to rutile Sn2TiO6 as experimentally observed. The subsequent electronic structure change is highlighted in the relative change of the electronic band gap which increases from ~1eV up to 2.2 eV and the 1.5 times increase of the bulk modulus assigned to the change from covalently SnII based compound to the more ionic SnIV one. Such trends are also confronted with the relevant properties of black SnIIO characterized by very small band gap.
△ Less
Submitted 14 June, 2016;
originally announced June 2016.
-
Electronic and magnetic structures and bonding properties of Ce2CrN3 and U2CrN3 from first principles
Authors:
Samir F. Matar,
Charbel N. Kfoury
Abstract:
The electronic and magnetic structures of A2CrN3 (A = Ce, U) ternary compounds calculated based on band magnetism within DFT exhibit different behaviors of the nf elements (n = 4, 5 resp.). Charge analysis allows to formally express the two compounds as A2Cr 5+ N3 5- thus classifying them as covalent nitrides, i.e. far from formal exchange of +- 9 electrons. From establishing the energy-volume equ…
▽ More
The electronic and magnetic structures of A2CrN3 (A = Ce, U) ternary compounds calculated based on band magnetism within DFT exhibit different behaviors of the nf elements (n = 4, 5 resp.). Charge analysis allows to formally express the two compounds as A2Cr 5+ N3 5- thus classifying them as covalent nitrides, i.e. far from formal exchange of +- 9 electrons. From establishing the energy-volume equations of state, the two compounds are found with hardness magnitudes: B0(A=Ce) =192 GPa and B0(A=U) = 243 GPa, within range of oxides due to covalent metal-nitrogen bonding shown as based on overlap matrix analysis. The uranium compound is harder due to a smaller volume and less compressible U versus Ce metals. Ce2CrN3 exhibits large magnetization on Cr (1.94BM) and a very small moment develops on cerium (0.14 BM) pointing out to an intermediate valence state while in U2CrN3, M(Cr) = 0.49 BM and M(U) = 0.97BM. These results are stressed by broad band-like density of states (DOS) behavior for A=U and localized DOS for A=Ce. Both compounds are found ferromagnetic in the ground state
△ Less
Submitted 13 June, 2016;
originally announced June 2016.
-
Ab initio studies of magnetic properties of cobalt and tetracobalt nitride Co$_{4}$N
Authors:
Abdesalem Houari,
Samir F. Matar,
Mohamed A. Belkhir
Abstract:
Magnetic properties and bonding analyses of perovskite structure Co$_{4}$N nitride have been investigated within density functional theory using both pseudo potential and all electron methods. In the same time, the structural and magnetic stability of pure cobalt in hexagonal close packed (HCP), face centered cubic (FCC) and body centered cubic (BCC) structures are reviewed. At equilibrium, non-sp…
▽ More
Magnetic properties and bonding analyses of perovskite structure Co$_{4}$N nitride have been investigated within density functional theory using both pseudo potential and all electron methods. In the same time, the structural and magnetic stability of pure cobalt in hexagonal close packed (HCP), face centered cubic (FCC) and body centered cubic (BCC) structures are reviewed. At equilibrium, non-spin polarized (NSP) and spin polarized (SP) calculations of the energy versus volume show that the ground state is ferromagnetic in both materials. HCP-Co is found to be more stable than the cubic ones. Magnetic moments of Co atoms in Co$_4$N nitride respectively belonging to two different crystallographic sites are studied over a wide range of the cubic lattice constant, and a comparison with the FCC-cobalt one is given. The volume expansion in the nitride indicates that the corner Co$^{I}$ atoms show localized magnetism while face center Co$^{II}$ atoms exhibit an itinerant behavior. Like in FCC-Fe/Fe$_{4}$N, a "low volume-low moment" and "large volume-high moment" behavior is observed for FCC-Co/Co$_4$N. The density of states of the Co$_{4}$N ferromagnetic ground state is interpreted within the rigid band model. The different bonding characters of Co$^I$-N versus Co$^{II}$-N are shown with help of electron localization fucntion ELF plots and spin resolved chemical bonding criteria.
△ Less
Submitted 10 August, 2015;
originally announced August 2015.
-
Coherent view of crystal chemistry and ab initio analyses of Pb(II) and Bi(III) Lone Pair in square planar coordination
Authors:
Samir F. Matar,
Jean Galy
Abstract:
The stereochemistry of 6s2 (E) lone pair of divalent Pb and trivalent Bi (PbII and BiIII designated by M*) in structurally related PbO, PbFX (X= Cl, Br, I), BiOX (X= F, Cl, Br, I) and Bi2NbO5F is rationalized. The lone pair LP presence determined by its sphere of influence E, equal to those of oxygen or fluorine anions, was settled by its center then giving M*-E directions and distances. Detailed…
▽ More
The stereochemistry of 6s2 (E) lone pair of divalent Pb and trivalent Bi (PbII and BiIII designated by M*) in structurally related PbO, PbFX (X= Cl, Br, I), BiOX (X= F, Cl, Br, I) and Bi2NbO5F is rationalized. The lone pair LP presence determined by its sphere of influence E, equal to those of oxygen or fluorine anions, was settled by its center then giving M*-E directions and distances. Detailed description of structural features of both elements in the title compounds characterized by [PbEO]n and [BiEO]n layers allowed to show the evolution of M*-E distance versus the changes with the square pyramidal SP coordination polyhedra. All are different, in red PbO one finds {PbEO4E4} square antiprism, a {[Bi.E]O4X4Xapical} monocapped square antiprism in PbFX and BiOX and {BiEO4F4}square antiprism in Bi2NbO5F. To analyze the crystal chemistry results, the electronic structures of these compounds were calculated within density functional theory DFT. Real space analyses of electron localization illustrate a full volume development of the lone pair on PbII within {PbEO4E4} in PbOE, {PbEF4X4} in PbFXE and Bi(III) within {BiEO4X4} square antiprisms, contrary to Bi(III) within {[Bi.E]O4F4Fapical} monocapped square antiprism. Larger hardness (larger bulk modules B0) and band gap characterize BiOF versus PbO due to the presence of F which brings antibonding Bi-F interactions oppositely to mainly bonding Bi-O. In PbFX and BiOX series there is a systematic decrease of B0 with the increasing volume following the nature and size of X which is decreasingly electronegative and increasingly large. The electronic densities of states mirror these effects through the relative energy position and relative electronegativities of F/X and O/X leading to decrease the band gap.
△ Less
Submitted 9 May, 2015; v1 submitted 20 December, 2014;
originally announced December 2014.
-
Electronic structure and crystal phase stability of palladium hydrides
Authors:
Abdesalem Houari,
Samir F. Matar,
Volker Eyert
Abstract:
The results of electronic structure calculations for a variety of palladium hydrides are presented. The calculations are based on density functional theory and used different local and semilocal approximations. The thermodynamic stability of all structures as well as the electronic and chemical bonding properties are addressed. For the monohydride, taking into account the zero-point energy is impo…
▽ More
The results of electronic structure calculations for a variety of palladium hydrides are presented. The calculations are based on density functional theory and used different local and semilocal approximations. The thermodynamic stability of all structures as well as the electronic and chemical bonding properties are addressed. For the monohydride, taking into account the zero-point energy is important to identify the octahedral Pd-H arrangement with its larger voids and, hence, softer hydrogen vibrational modes as favorable over the tetrahedral arrangement as found in the zincblende and wurtzite structures. Stabilization of the rocksalt structure is due to strong bonding of the 4d and 1s orbitals, which form a characteristic split-off band separated from the main d-band group. Increased filling of the formerly pure d states of the metal causes strong reduction of the density of states at the Fermi energy, which undermines possible long-range ferromagnetic order otherwise favored by strong magnetovolume effects. For the dihydride, octahedral Pd-H arrangement as realized e.g. in the pyrite structure turns out to be unstable against tetrahedral arrangement as found in the fluorite structure. Yet, from both heat of formation and chemical bonding considerations the dihydride turns out to be less favorable than the monohydride. Finally, the vacancy ordered defect phase Pd3H4 follows the general trend of favouring the octahedral arrangement of the rocksalt structure for Pd:H ratios less or equal to one.
△ Less
Submitted 3 November, 2014;
originally announced November 2014.
-
Ab initio study of CrNF: the first half-metallic ferromagnet nitride fluoride mimicking CrO2
Authors:
Samir F Matar
Abstract:
Based on the different covalent versus ionic chemical bonding and isoelectronic rutile CrO2, CrNF is proposed starting from ordered rutile derivative structures subjected to full geometry optimizations. The ground state structure defined from cohesive energies is of MgUO4-type, characterized by short covalent Cr-N and long ionic Cr-F distances. Like CrO2 it is a half-metallic ferromagnet with M =…
▽ More
Based on the different covalent versus ionic chemical bonding and isoelectronic rutile CrO2, CrNF is proposed starting from ordered rutile derivative structures subjected to full geometry optimizations. The ground state structure defined from cohesive energies is of MgUO4-type, characterized by short covalent Cr-N and long ionic Cr-F distances. Like CrO2 it is a half-metallic ferromagnet with M = 2 Bohr Magnetons integer magnetization per formula unit with reduced band gap at minority spins. Major differences of magnetic response to pressure characterize CrNF as a soft ferromagnet versus hard magnetic CrO2. The chemical bonding properties point to prevailing covalent Cr-N versus ionic Cr-F bonding. Synthesis routes with two different protocols are proposed and analyzed.
△ Less
Submitted 8 March, 2014;
originally announced March 2014.
-
Molecular Dynamics of Spin Crossover: the (P,T) phase diagram of [Fe(PM-BIA)2(NCS)2]
Authors:
A. Marbeuf,
P. Négrier,
S. F. Matar,
L. Kabalan,
J. F. Létard,
P. Guionneau
Abstract:
The spin crossover properties and the domains of existence of the different phases for the [Fe(PM-BIA)2(NCS)2] complex are obtained from combining DFT and classical molecular dynamics (MD). The potential energy surfaces expressed in the Morse form for Fe-N interactions are deduced from molecular DFT calculations and they allow producing Infra Red and Raman frequencies. These Fe-N potentials insert…
▽ More
The spin crossover properties and the domains of existence of the different phases for the [Fe(PM-BIA)2(NCS)2] complex are obtained from combining DFT and classical molecular dynamics (MD). The potential energy surfaces expressed in the Morse form for Fe-N interactions are deduced from molecular DFT calculations and they allow producing Infra Red and Raman frequencies. These Fe-N potentials inserted in a classical force field lead from MD calculations to the relative energies of the high spin and low spin configurations of the orthorhombic structure. The MD investigations have also allowed assessing the experimental (P, T) phase diagram by showing the monoclinic polymorph in its two spin- states, and generating two triple points.
△ Less
Submitted 19 January, 2013;
originally announced January 2013.
-
Drastic changes in electronic, magnetic, mechanical and bonding properties from Zr2CoH5 to Mg2CoH5
Authors:
Samir F. Matar
Abstract:
Despite similarities in formulae and local structures of Zr2CoH5 and Mg2CoH5, they are shown from ab initio calculations to present contrasted electronic, magnetic, mechanical and bonding properties due to the environment of cobalt with hydrogen characterized by negatively charged CoHx entities (x = 4, 5 resp.) and to the chemical nature of Zr versus Mg. Zr2CoH5 is found more cohesive, harder and…
▽ More
Despite similarities in formulae and local structures of Zr2CoH5 and Mg2CoH5, they are shown from ab initio calculations to present contrasted electronic, magnetic, mechanical and bonding properties due to the environment of cobalt with hydrogen characterized by negatively charged CoHx entities (x = 4, 5 resp.) and to the chemical nature of Zr versus Mg. Zr2CoH5 is found more cohesive, harder and less ductile than Mg2CoH5. High density of states at the Fermi level arises from out-of-plane non-bonding Co-dz2 in Zr2CoH5 which is found metallic ferromagnet in the ground state, in contrast with non magnetic and insulating Mg2CoH5.
△ Less
Submitted 4 December, 2012;
originally announced December 2012.
-
Carbon-induced ionocovalence in MgH2 storage material
Authors:
Samir F. Matar
Abstract:
The overall large ionic character of MgH2 is reduced by inserting light elements from the first period, B and C, using a trirutile host superstructure. Both elements are found destabilizing to the structure with largely positive cohesive energy with interstitial B and slightly negative cohesive energy with interstitial C. This trend is also observed for low amounts of insertion down to (B,C)0.167M…
▽ More
The overall large ionic character of MgH2 is reduced by inserting light elements from the first period, B and C, using a trirutile host superstructure. Both elements are found destabilizing to the structure with largely positive cohesive energy with interstitial B and slightly negative cohesive energy with interstitial C. This trend is also observed for low amounts of insertion down to (B,C)0.167MgH2. From the Bader charge analysis the largely ionic character of hydrogen is decreased to an average H-0.37 in the neighborhood of C and H-0.75 for the other hydrogen atoms atoms (resp. H-0.64 and H-0.76 for B insertion). This peculiar behavior should enable enhancing the kinetics of H release for potential applications.
△ Less
Submitted 13 December, 2012; v1 submitted 4 December, 2012;
originally announced December 2012.
-
119Sn solid state NMR and Mössbauer spectroscopic studies of the intermediate-valent stannide CeRuSn
Authors:
F. M. Schappacher,
P. Khuntia,
A. K. Rajarajan,
M. Baenitz,
J. A. Mydosh,
B. Chevalier,
S. F. Matar,
R. Pöttgen
Abstract:
The ternary stannide CeRuSn is a static mixed-valent cerium compound with an or-dering of trivalent and intermediate-valent cerium on two distinct crystallographic sites. 119Sn Mössbauer spectra showed two electronically almost identical tin atoms at 323 K, while at 298 K and below (77 and 4.2 K) two tin sites can clearly be distinguished. 119Sn solid state NMR experiments are performed to probe t…
▽ More
The ternary stannide CeRuSn is a static mixed-valent cerium compound with an or-dering of trivalent and intermediate-valent cerium on two distinct crystallographic sites. 119Sn Mössbauer spectra showed two electronically almost identical tin atoms at 323 K, while at 298 K and below (77 and 4.2 K) two tin sites can clearly be distinguished. 119Sn solid state NMR experiments are performed to probe the local hyperfine fields at the two different Sn sites. 119Sn NMR powder spectra are nicely fitted with two Sn sites with nearly the same magnetic anisotropy, but with different absolute shift values. Both Sn sites are strongly affected by crossover-like transitions between 100 and 280 K. This local-site study confirms the superstructure modulations found in previous investiga-tions. Towards lower temperatures the powder spectra are broadened giving strong evidence for the antiferromagnetically ordered ground state.
△ Less
Submitted 15 June, 2012;
originally announced June 2012.
-
Semiconducting (Half-Metallic) Ferromagnetism in Mn(Fe) Substituted Pt and Pd Nitrides
Authors:
Abdesalem Houari,
Samir F. Matar,
Volker Eyert
Abstract:
Using first principles calculations as based on density functional theory, we propose a class of so far unexplored diluted ferromagnetic semiconductors and half-metals. Here, we study the electronic properties of recently synthesized $ 4d $ and $ 5d $ transition metal dinitrides. In particular, we address Mn- and Fe-substitution in PtN$_2$ and PdN$_2$. Structural relaxation shows that the resultin…
▽ More
Using first principles calculations as based on density functional theory, we propose a class of so far unexplored diluted ferromagnetic semiconductors and half-metals. Here, we study the electronic properties of recently synthesized $ 4d $ and $ 5d $ transition metal dinitrides. In particular, we address Mn- and Fe-substitution in PtN$_2$ and PdN$_2$. Structural relaxation shows that the resulting ordered compounds, Pt$_{0.75}$(Mn,Fe)$_{0.25}$N$_2$ and Pd$_{0.75}$(Mn,Fe)$_{0.25}$N$_2$, maintain the cubic crystal symmetry of the parent compounds. On substitution, all compounds exhibit long-range ferromagnetic order. While both Pt$_{0.75}$Mn$_{0.25}$N$_2$ and Pd$_{0.75}$Mn$_{0.25}$N$_2$ are semiconducting, Fe-substitution causes half-metallic behavior for both parent materials.
△ Less
Submitted 9 January, 2011;
originally announced January 2011.
-
Stability and magnetic properties of Mn-substituted ScN from first principles
Authors:
Abdesalem Houari,
Samir. F. Matar,
Mohamed A. Belkhir
Abstract:
We present a spin density functional theory (DFT) study for semiconducting ScN and Mn-substituted ScN.
Their structural and magnetic properties have been investigated using the all electrons augmented spherical wave method (ASW) with a generalized gradient GGA functional for treating the effects of exchange and correlation.
Band structure calculations show that ScN is semiconductor with a na…
▽ More
We present a spin density functional theory (DFT) study for semiconducting ScN and Mn-substituted ScN.
Their structural and magnetic properties have been investigated using the all electrons augmented spherical wave method (ASW) with a generalized gradient GGA functional for treating the effects of exchange and correlation.
Band structure calculations show that ScN is semiconductor with a narrow indirect band gap $Γ$-X of 0.54 eV.
The total-energy versus volume calculations show that ternary Sc$_{0.75}$Mn$_{0.25}$N nitride is more stable in face centered tetragonal-rocksalt (fct-rocksalt) structure, found experimentally, than the cubic rocksalt one. Spin polarized results, at theoretical equilibrium, indicate that the ground state of Sc$_{0.75}$Mn$_{0.25}$N is ferromagnetic with a high moment at Mn-atom (3.44$μ_B$), and zero moment on Sc and N ones. The magnetovolume effects of Mn-substitution in ScN lattice are discussed. The electronic structures analyzed from site/spin projected density of states and chemical bonding, for both the mononitride and the ternary alloy, are reported. A discussion of the structural and magnetic properties of Sc$_{0.75}$Mn$_{0.25}$N is given with a comparison to ScN, in order to get insights of the Mn-substitution effects.
△ Less
Submitted 9 September, 2009;
originally announced September 2009.
-
Structural stability and magnetism of FeN from first principles
Authors:
A. Houari,
S. F. Matar,
M. A. Belkhir,
M. Nakhl
Abstract:
In the framework of density functional theory (DFT), the structural and magnetic properties of FeN mono nitride have been investigated using the all electrons augmented spherical wave method (ASW) with a generalized gradient GGA functional for treating the effects of exchange and correlation. Calculation of the energy versus volume in hypothetic rocksalt (RS), zinc-blende (ZB) and wurtzite (W) t…
▽ More
In the framework of density functional theory (DFT), the structural and magnetic properties of FeN mono nitride have been investigated using the all electrons augmented spherical wave method (ASW) with a generalized gradient GGA functional for treating the effects of exchange and correlation. Calculation of the energy versus volume in hypothetic rocksalt (RS), zinc-blende (ZB) and wurtzite (W) types structures shows that the RS-type structure is more stable than the others. Spin polarized calculation results at equilibrium volume indicate that the ground state of RS-FeN is ferromagnetic with a high moment, while ZB-FeN and W-FeN are non magnetic. The influence of distortions on the stability is taken into account by considering FeN in two different face-centred tetragonal structures (fct): fct-rocksalt and fct-zincblende. The magnetovolume effects with respect to Slater-Pauling-Friedel model are discussed. The electronic structures analyzed from site and spin projected density of states are reported. A discussion of the structural and magnetic properties of FeN is given with respect to N local environment of Fe.
△ Less
Submitted 7 September, 2009;
originally announced September 2009.
-
First principles studies of SnTiO3 perovskite as a potential ferroelectric material
Authors:
S. F. Matar,
M. A. Subramanian,
I. Baraille
Abstract:
In the context of the search for environment-respectful, lead- and bismuth- free chemical compounds for devices such as actuators, SnTiO3 (ST) is investigated from first principles within DFT. Full geometry optimization provides a stable tetragonal structure relative to cubic one. From the equation of state the equilibrium volume of SnTiO3 is found smaller than ferroelectric PbTiO3 (PT) in agree…
▽ More
In the context of the search for environment-respectful, lead- and bismuth- free chemical compounds for devices such as actuators, SnTiO3 (ST) is investigated from first principles within DFT. Full geometry optimization provides a stable tetragonal structure relative to cubic one. From the equation of state the equilibrium volume of SnTiO3 is found smaller than ferroelectric PbTiO3 (PT) in agreement with a smaller Sn2+ radius. While ionic displacements exhibit similar trends between ST and PT a larger tetragonality (c/a ratio) for ST results in a larger polarization, PST = 1.1 C.m2. The analysis of the electronic band structure detailing the Sn-O and Ti-O interactions points to a differentiated chemical bonding and a reinforcement of the covalent bonding with respect to Pb homologue.
△ Less
Submitted 12 January, 2013; v1 submitted 16 July, 2008;
originally announced July 2008.
-
Ab initio approach of the hydrogen insertion effects on the magnetic properties of $ {\bf ScFe_2} $
Authors:
A. F. Al Alam,
S. F. Matar,
N. Ouaini,
M. Nakhl
Abstract:
The electronic and magnetic structures of $ {\rm ScFe_2} $ and of its dihydride $ {\rm ScFe_2H_2} $ are self-consistently calculated within the density functional theory (DFT) using the all electron augmented spherical wave (ASW) method with the local spin density approximation (LSDA) for treating effects of exchange and correlation. The results of the enhancement of the magnetization upon hydro…
▽ More
The electronic and magnetic structures of $ {\rm ScFe_2} $ and of its dihydride $ {\rm ScFe_2H_2} $ are self-consistently calculated within the density functional theory (DFT) using the all electron augmented spherical wave (ASW) method with the local spin density approximation (LSDA) for treating effects of exchange and correlation. The results of the enhancement of the magnetization upon hydrogen insertion are assessed within an analysis of the chemical bonding properties from which we suggest that both hydrogen bond with iron and cell expansion effects play a role in the change of the magnitude of magnetization. In agreement with average experimental findings for both the intermetallic system and its dihydride, the calculated Fermi contact terms $H_{FC}$ of the $^{57}$Fe Mössbauer spectroscopy for hyperfine field, at the two iron sites, exhibit an original inversion for the order of magnitudes upon hydriding.
△ Less
Submitted 16 April, 2008;
originally announced April 2008.
-
Interplay of chemical pressure and hydrogen insertion effects in $ {\bf CeRhSn} $ from first principles
Authors:
A. F. Al Alam,
S. F. Matar,
N. Ouaini,
M. Nakhl
Abstract:
Investigations within the local spin density functional theory (LSDF) of the intermetallic hydride system $ {\rm CeRhSnH_x} $ were carried out for discrete model compositions in the range $ 0.33 \leq x_H \leq 1.33 $. The aim of this study is to assess the change of the cerium valence state in the neighborhood of the experimental hydride composition, $ {\rm CeRhSnH_{0.8}} $. In agreement with exp…
▽ More
Investigations within the local spin density functional theory (LSDF) of the intermetallic hydride system $ {\rm CeRhSnH_x} $ were carried out for discrete model compositions in the range $ 0.33 \leq x_H \leq 1.33 $. The aim of this study is to assess the change of the cerium valence state in the neighborhood of the experimental hydride composition, $ {\rm CeRhSnH_{0.8}} $. In agreement with experiment, the analyses of the electronic and magnetic structures and of the chemical bonding properties point to trivalent cerium for $ 1 \leq x_H \leq 1.33 $. In contrast, for lower hydrogen amounts the hydride system stays in an intermediate-valent state for cerium, like in $ {\rm CeRhSn} $. The influence of the insertion of hydrogen is addressed from both the volume expansion and chemical bonding effects. The latter are found to have the main influence on the change of Ce valence character. Spin polarized calculations point to a finite magnetic moment carried by the Ce $ 4f $ states; its magnitude increases with $ x_H $ in the range $ 1 \leq x_H \leq 1.33 $.
△ Less
Submitted 25 March, 2008;
originally announced March 2008.
-
Molecular and all solid DFT studies of the magnetic and chemical bonding properties within KM[Cr(CN)$_6$] (M = V, Ni) complexes
Authors:
L. Kabalan,
S. F. Matar,
C. Desplanches,
J. F. Létard,
M. Zakhour
Abstract:
A study at both the molecular and extended solid level in the framework DFT is carried out for KM[Cr(CN)$_6$] (M = V, Ni). From molecular calculations, the exchange parameters J are obtained, pointing to the expected magnetic ground states, i.e., antiferromagnetic for M = V with J = -296.5 cm$^{-1}$ and ferromagnetic for M = Ni with J = +40.5 cm$^{-1}$. From solid state computations the same gro…
▽ More
A study at both the molecular and extended solid level in the framework DFT is carried out for KM[Cr(CN)$_6$] (M = V, Ni). From molecular calculations, the exchange parameters J are obtained, pointing to the expected magnetic ground states, i.e., antiferromagnetic for M = V with J = -296.5 cm$^{-1}$ and ferromagnetic for M = Ni with J = +40.5 cm$^{-1}$. From solid state computations the same ground states and J magnitudes are confirmed from energy differences. Furthermore an analysis of the site projected density of states and of the chemical bonding is developed in which the cyanide ion linkage is analyzed addressing some isomerism aspects.
△ Less
Submitted 25 February, 2008;
originally announced February 2008.
-
Ab initio molecular and solid state studies of Fe$^{II}$ spin cross-over system [Fe(btz)$_2$(NCS)$_2$
Authors:
L. Kabalan,
S. F. Matar,
M. Zakhour,
J. F. Létard
Abstract:
Ab initio computations within the density functional theory are reported for the spin cross-over complex, [Fe(btz)$_{2}$(NCS)$_{2}$], where 3d$^6$ Fe$^{II}$ is characterized by High Spin (HS t$_{2g}^4$, e$_g^2$) and Low Spin (LS t$_{2g}^6$, e$_g^0$) states. Results of infra red and Raman spectra for the isolated molecule are complemented for the crystalline solid with a full account of the elect…
▽ More
Ab initio computations within the density functional theory are reported for the spin cross-over complex, [Fe(btz)$_{2}$(NCS)$_{2}$], where 3d$^6$ Fe$^{II}$ is characterized by High Spin (HS t$_{2g}^4$, e$_g^2$) and Low Spin (LS t$_{2g}^6$, e$_g^0$) states. Results of infra red and Raman spectra for the isolated molecule are complemented for the crystalline solid with a full account of the electronic band structure properties: the density of states assessing the crystal field effects and the chemical bonding assigning a specific role to the Fe-N interaction within the coordination sphere of Fe$^{II}$.
△ Less
Submitted 12 October, 2007;
originally announced October 2007.
-
First principles investigations of the electronic, magnetic and chemical bonding properties of CeTSn (T=Rh,Ru)
Authors:
S. F. Matar,
J. F. Riecken,
B. Chevalier,
R. Poettgen,
V. Eyert
Abstract:
The electronic structures of CeRhSn and CeRuSn are self-consistently calculated within density functional theory using the local spin density approximation for exchange and correlation. In agreement with experimental findings, the analyses of the electronic structures and of the chemical bonding properties point to the absence of magnetization within the mixed valent Rh based system while a fini…
▽ More
The electronic structures of CeRhSn and CeRuSn are self-consistently calculated within density functional theory using the local spin density approximation for exchange and correlation. In agreement with experimental findings, the analyses of the electronic structures and of the chemical bonding properties point to the absence of magnetization within the mixed valent Rh based system while a finite magnetic moment is observed for trivalent cerium within the Ru-based stannide, which contains both trivalent and intermediate valent Ce.
△ Less
Submitted 1 August, 2007;
originally announced August 2007.
-
First principles study of the electronic and magnetic structures of the tetragonal and orthorhombic phases of Ca3Mn2O7
Authors:
S. F. Matar,
V. Eyert,
A. Villesuzanne,
M. -H. Whangbo
Abstract:
On the basis of density functional theory electronic band structure calculations using the augmented spherical wave method, the electronic and magnetic properties of the orthorhombic and tetragonal phases of Ca3Mn2O7 were investigated and the spin exchange interactions of the orthorhombic phase were analyzed. Our calculations show that the magnetic insulating states are more stable than the non-…
▽ More
On the basis of density functional theory electronic band structure calculations using the augmented spherical wave method, the electronic and magnetic properties of the orthorhombic and tetragonal phases of Ca3Mn2O7 were investigated and the spin exchange interactions of the orthorhombic phase were analyzed. Our calculations show that the magnetic insulating states are more stable than the non-magnetic metallic state for both polymorphs of Ca3Mn2O7, the orthorhombic phase is more stable than the tetragonal phase, and the ground state of the orthorhombic phase is antiferromagnetic. The total energies calculated for the three spin states of the orthorhombic phase of Ca3Mn2O7 led to estimates of the spin exchange interactions Jnn = -3.36 meV and Jnnn = -0.06 meV. The accuracy of these estimates were tested by calculating the Curie-Weiss temperature within the mean-field approximation.
△ Less
Submitted 6 November, 2006;
originally announced November 2006.
-
First principles investigation of the electronic structure of La2MnNiO6: A room-temperature insulating ferromagnet
Authors:
S. F. Matar,
M. A. Subramanian,
V. Eyert,
M. Whangbo,
A. Villesuzanne
Abstract:
Using first principles calculations within DFT based on the full potential APW+lo method, we calculated the electronic and magnetic structures for the ferromagnetic and antiferromagnetic states of La2MnNiO6 and analyzed the site projected density of states and electronic band structures. Our calculations show that the ground state of La2MnNiO6 is ferromagnetic insulating with the magnetization i…
▽ More
Using first principles calculations within DFT based on the full potential APW+lo method, we calculated the electronic and magnetic structures for the ferromagnetic and antiferromagnetic states of La2MnNiO6 and analyzed the site projected density of states and electronic band structures. Our calculations show that the ground state of La2MnNiO6 is ferromagnetic insulating with the magnetization in agreement with Hund's first rule and experimental findings.
△ Less
Submitted 16 September, 2005;
originally announced September 2005.
