-
Drying-induced stresses in poroelastic drops on rigid substrates
Authors:
Matthew G. Hennessy,
Richard V. Craster,
Omar K. Matar
Abstract:
We develop a theory for drying-induced stresses in sessile, poroelastic drops undergoing evaporation on rigid surfaces. Using a lubrication-like approximation, the governing equations of three-dimensional nonlinear poroelasticity are reduced to a single thin-film equation for the drop thickness. We find that thin drops experience compressive elastic stresses but the total in-plane stresses are ten…
▽ More
We develop a theory for drying-induced stresses in sessile, poroelastic drops undergoing evaporation on rigid surfaces. Using a lubrication-like approximation, the governing equations of three-dimensional nonlinear poroelasticity are reduced to a single thin-film equation for the drop thickness. We find that thin drops experience compressive elastic stresses but the total in-plane stresses are tensile. The mechanical response of the drop is dictated by the initial profile of the solid skeleton, which controls the in-plane deformation, the dominant components of elastic stress, and sets a limit on the depth of delamination that can potentially occur. Our theory suggests that the alignment of desiccation fractures in colloidal drops is selected by the shape of the drop at the point of gelation. We propose that the emergence of three distinct fracture patterns in dried blood drops is a consequence of a non-monotonic drop profile at gelation. We also show that depletion fronts, which separate wet and dry solid, can invade the drop from the contact line and localise the generation of mechanical stress during drying. Finally, the finite element method is used to explore the stress profiles in drops with large contact angles.
△ Less
Submitted 13 March, 2022; v1 submitted 12 November, 2021;
originally announced November 2021.
-
Single-Bubble Dynamics in Nanopores: Transition Between Homogeneous and Heterogeneous Nucleation
Authors:
Soumyadeep Paul,
Wei-Lun Hsu,
Mirco Magnini,
Lachlan R Mason,
Ya-Lun Ho,
Omar K Matar,
Hirofumi Daiguji
Abstract:
When applying a voltage bias across a thin nanopore, localized Joule heating can lead to single bubble nucleation, offering a unique platform for studying nanoscale bubble behavior, which is still poorly understood. Accordingly, we investigate bubble nucleation and collapse inside solid-state nanopores filled with electrolyte solutions and find that there exists a clear correlation between homo/he…
▽ More
When applying a voltage bias across a thin nanopore, localized Joule heating can lead to single bubble nucleation, offering a unique platform for studying nanoscale bubble behavior, which is still poorly understood. Accordingly, we investigate bubble nucleation and collapse inside solid-state nanopores filled with electrolyte solutions and find that there exists a clear correlation between homo/heterogeneous bubble nucleation and the pore diameter. As the pore diameter is increased from 280 nm to 525 nm, the nucleation regime transitions from predominantly periodic homogeneous nucleation to a non-periodic mixture of homogeneous and heterogeneous nucleation. A transition barrier between the homogeneous and heterogeneous nucleation regimes is defined by considering the relative free-energy costs of cluster formation. A thermodynamic model considering the transition barrier and contact-line pinning on curved surfaces is constructed, which determines the possibility of heterogeneous nucleation. It is shown that the experimental bubble generation behavior is closely captured by our thermodynamic analysis, providing important information for controlling the periodic homogeneous nucleation of bubbles in nanopores.
△ Less
Submitted 19 November, 2020; v1 submitted 26 July, 2020;
originally announced July 2020.
-
Numerical simulation, clustering and prediction of multi-component polymer precipitation
Authors:
Pavan Inguva,
Lachlan Mason,
Indranil Pan,
Miselle Hengardi,
Omar K. Matar
Abstract:
Multi-component polymer systems are of interest in organic photovoltaic and drug delivery applications, among others where diverse morphologies influence performance. An improved understanding of morphology classification, driven by composition-informed prediction tools, will aid polymer engineering practice. We use a modified Cahn-Hilliard model to simulate polymer precipitation. Such physics-bas…
▽ More
Multi-component polymer systems are of interest in organic photovoltaic and drug delivery applications, among others where diverse morphologies influence performance. An improved understanding of morphology classification, driven by composition-informed prediction tools, will aid polymer engineering practice. We use a modified Cahn-Hilliard model to simulate polymer precipitation. Such physics-based models require high-performance computations that prevent rapid prototyping and iteration in engineering settings. To reduce the required computational costs, we apply machine learning techniques for clustering and consequent prediction of the simulated polymer blend images in conjunction with simulations. Integrating ML and simulations in such a manner reduces the number of simulations needed to map out the morphology of polymer blends as a function of input parameters and also generates a data set which can be used by others to this end. We explore dimensionality reduction, via principal component analysis and autoencoder techniques, and analyse the resulting morphology clusters. Supervised machine learning using Gaussian process classification was subsequently used to predict morphology clusters according to species molar fraction and interaction parameter inputs. Manual pattern clustering yielded the best results, but machine learning techniques were able to predict the morphology of polymer blends with $\geq$ 90 $\%$ accuracy.
△ Less
Submitted 26 August, 2020; v1 submitted 10 July, 2020;
originally announced July 2020.
-
Giant magnetoelastic coupling in Love acoustic waveguide based on uniaxial multilayered TbCo2/FeCo nanostructured thin film on Quartz ST-cut
Authors:
Aurelien Mazzamurro,
Yannick Dusch,
Philippe Pernod,
Olivier Bou Matar,
Ahmed Addad,
Abdelkrim Talbi,
Nicolas Tiercelin
Abstract:
Coupling between dynamic strain and magnetization in ferromagnetic thin films has attracted special consideration as it presents both intriguing fundamental physics problems and technological importance for potential multi-functional devices and information handling. The dynamic strain can be generated by acoustic waves including bulk, surface or guided waves. In this work, we propose the theoreti…
▽ More
Coupling between dynamic strain and magnetization in ferromagnetic thin films has attracted special consideration as it presents both intriguing fundamental physics problems and technological importance for potential multi-functional devices and information handling. The dynamic strain can be generated by acoustic waves including bulk, surface or guided waves. In this work, we propose the theoretical and experimental investigation of the interaction of pure shear horizontal (SH) wave with a uniaxial multilayered TbCo2/FeCo thin film in a delay line configuration fabricated on Quartz ST-90X cut. We evaluate theoretically the evolution of phase velocity as a function of magnetic field and experimentally the variation of the transmission coefficient. A piezomagnetic model was developed allowing us to calculate the elastic stiffness constants of the multilayer as a function of the applied magnetic field. The model was also implemented for acoustic waves dispersion curves calculation. We show that the evolution of phase velocity is dominated by the C66 elastic stiffness constant variation as expected for the case of shear horizontal surface wave. The fabricated device let us exciting both fundamental and third harmonic shear mode at 410 MHz and 1.2 GHz, respectively. For both modes, the theoretical results corroborate very well the experimental ones. At 1.2 GHz the mode exhibits a maximum phase velocity shift close to 2.5% and an attenuation reaching 500 dB/cm, for a sensitivity as high as 250 ppm/Oe. The reported theoretical model and experimental results are of tremendous interest for the development of advanced devices for magnetic field sensing applications as well as investigating magnon-phonon interaction at a fundamental level.
△ Less
Submitted 22 January, 2020; v1 submitted 2 August, 2019;
originally announced August 2019.
-
Autler-Townes splitting and acoustically induced transparency based on Love waves interacting with pillared meta-surface
Authors:
Yuxin Liu,
Abdelkrim Talbi,
El Houssaine El Boudouti,
Olivier Bou Matar,
Philippe Pernod,
Bahram Djafari-Rouhani
Abstract:
Autler-Townes Splitting (ATS) and Electromagnetically Induced Transparency (EIT) are similar phenomena but distinct in nature. They have been widely discussed and distinguished by employing the Akaike information criterion (AIC). However, such work is lacking in acoustic system. In this work, the interaction of Love waves with two-line pillared meta-surface is numerically investigated by Finite El…
▽ More
Autler-Townes Splitting (ATS) and Electromagnetically Induced Transparency (EIT) are similar phenomena but distinct in nature. They have been widely discussed and distinguished by employing the Akaike information criterion (AIC). However, such work is lacking in acoustic system. In this work, the interaction of Love waves with two-line pillared meta-surface is numerically investigated by Finite Element Method. Acoustic analogue of ATS, Fabry-Perot resonance and cavity modes are first demonstrated in two lines of identical pillars by varying the distance between the pillar lines. By detuning the radius of one line of pillars, Fabry-Perot resonance along with two different pillar resonances give rise to the acoustic analogue of EIT (AIT) when the distance between the pillar lines is a multiple of half wavelength. ATS and AIT formula models are used to fit the transmission spectra, showing good agreements with numerical results. The quality of the fit models is quantitatively evaluated by resorting to the AIC. We show that theoretical and analytical discrimination between ATS and AIT are methodologically complementary. These results should have important consequences for potential acoustic applications such as wave control, designing of meta-materials and bio-sensors.
△ Less
Submitted 29 May, 2019; v1 submitted 11 March, 2019;
originally announced March 2019.
-
Interaction of Love waves with coupled cavity modes in a 2D holey phononic crystal
Authors:
Yuxin Liu,
Abdelkrim Talbi,
Bahram Djafari-Rouhani,
El Houssaine El Boudouti,
Lucie Drbohlavova,
Vincent Mortet,
Olivier Bou Matar,
Philippe Pernod
Abstract:
The interaction of Love waves with square array of pillars deposited on a cavity defined in a 2D holey phononic crystal is numerically investigated using Finite Element Method. First, the existence of SH surface modes is demonstrated separately for phononic crystals that consist of square arrayed holes, or rectangular arrayed Ni pillars, respectively in, or on, a SiO2 film deposited on a ST-cut qu…
▽ More
The interaction of Love waves with square array of pillars deposited on a cavity defined in a 2D holey phononic crystal is numerically investigated using Finite Element Method. First, the existence of SH surface modes is demonstrated separately for phononic crystals that consist of square arrayed holes, or rectangular arrayed Ni pillars, respectively in, or on, a SiO2 film deposited on a ST-cut quartz substrate. The coupling between SH modes and torsional mode in pillars induces a transmission dip that occurs at a frequency located in the range of the band-gap of the holey phononic crystal. Second, a cavity is constructed by removing lines of holes in the holey phononic crystal and results in a transmission peak that matches the dip. The optimal geometrical parameters enable us to create a coupling of the cavity mode and the localized pillar mode by introducing lines of pillars into the cavity, which significantly improved the efficiency of the cavity without increasing the crystal size. The obtained results will pave the way to implement advanced designs of high-performance electroacoustic sensors based on coupling modes in phononic crystals.
△ Less
Submitted 2 March, 2019; v1 submitted 9 November, 2018;
originally announced November 2018.
-
Moving Contact Lines: Linking Molecular Dynamics and Continuum-Scale Modeling
Authors:
E. R. Smith,
P. E. Theodorakis,
R. V. Craster,
O. K. Matar
Abstract:
Despite decades of research, the modeling of moving contact lines has remained a formidable challenge in fluid dynamics whose resolution will impact numerous industrial, biological, and daily life applications. On the one hand, molecular dynamics (MD) simulation has the ability to provide unique insight into the microscopic details that determine the dynamic behavior of the contact line, which is…
▽ More
Despite decades of research, the modeling of moving contact lines has remained a formidable challenge in fluid dynamics whose resolution will impact numerous industrial, biological, and daily life applications. On the one hand, molecular dynamics (MD) simulation has the ability to provide unique insight into the microscopic details that determine the dynamic behavior of the contact line, which is not possible with either continuum-scale simulations or experiments. On the other hand, continuum-based models provide a link to the macroscopic description of the system. In this Feature Article, we explore the complex range of physical factors, including the presence of surfactants, which governs the contact line motion through MD simulations. We also discuss links between continuum- and molecular-scale modeling and highlight the opportunities for future developments in this area.
△ Less
Submitted 3 November, 2018;
originally announced November 2018.
-
Highly confined Love waves modes by defect states in a holey SiO2 /quartz phononic crystal
Authors:
Yuxin Liu,
Abdelkrim Talbi,
Philippe Pernod,
Olivier Matar
Abstract:
Highly confined Love modes are demonstrated in a phononic crystal based on a square array of etched holes in SiO 2 deposited on the ST-cut quartz. An optimal choice of the geometrical parameters contributes to a wide stop-band for shear waves' modes. The introduction of a defect by removing lines of holes leads to the nearly flat modes within the band gap and consequently paves the way to implemen…
▽ More
Highly confined Love modes are demonstrated in a phononic crystal based on a square array of etched holes in SiO 2 deposited on the ST-cut quartz. An optimal choice of the geometrical parameters contributes to a wide stop-band for shear waves' modes. The introduction of a defect by removing lines of holes leads to the nearly flat modes within the band gap and consequently paves the way to implement advanced designs of electroacoustic filters and high-performance cavity resonators. The calculations are based on the finite element method in considering the elastic and piezoelectric properties of the materials. Interdigital transducers are employed to measure the transmission spectra. The geometrical parameters enabling the appearance of confined cavity modes within the band gap and the efficiency of the electric excitation were investigated.
△ Less
Submitted 1 October, 2018;
originally announced October 2018.
