-
Strong Fiber from Uniaxial Fullerene Supramolecules Aligned with Carbon Nanotubes
Authors:
John Bulmer,
Michelle Durán-Chaves,
Daniel M. Long,
Jeremiah Lipp,
Steven Williams,
Mitchell Trafford,
Anthony Pelton,
Jared Shank,
Benji Maruyama,
Larry Drummy,
Matteo Pasquali,
Hilmar Koerner,
Timothy Haugan
Abstract:
Carbon nanotube (CNT) wires approach copper's specific conductivity and surpass carbon fiber's strength, with further improvement anticipated with greater aspect ratios and incorporation of dopants with long-range structural order. Fullerenes assemble into multitudes of process-dependent supramolecular crystals and, while initially insulating, they become marginally conductive (up to 0.05 MSm…
▽ More
Carbon nanotube (CNT) wires approach copper's specific conductivity and surpass carbon fiber's strength, with further improvement anticipated with greater aspect ratios and incorporation of dopants with long-range structural order. Fullerenes assemble into multitudes of process-dependent supramolecular crystals and, while initially insulating, they become marginally conductive (up to 0.05 MSm$^{-1}$) and superconductive ($T_c=18^\circ$K with K and 28$^\circ$K with Rb) after doping. These were small (100's $μ$m long), soft (hardness comparable to indium), and typically unaligned, which hindered development of fullerene based wires. Individual fullerenes were previously incorporated into CNT fibers, although randomly without self-assembly into supramolecules. Here, a simple variation in established CNT acid extrusion creates a fiber composed of uniaxial chains of aligned fullerene supramolecules, self-assembled between aligned few-walled CNT bundles. This will provide a testbed for novel fullerene wire transport and prospects in CNT wire advancement.
△ Less
Submitted 20 February, 2023;
originally announced February 2023.
-
Benchmarking the Performance of Bayesian Optimization across Multiple Experimental Materials Science Domains
Authors:
Qiaohao Liang,
Aldair E. Gongora,
Zekun Ren,
Armi Tiihonen,
Zhe Liu,
Shijing Sun,
James R. Deneault,
Daniil Bash,
Flore Mekki-Berrada,
Saif A. Khan,
Kedar Hippalgaonkar,
Benji Maruyama,
Keith A. Brown,
John Fisher III,
Tonio Buonassisi
Abstract:
In the field of machine learning (ML) for materials optimization, active learning algorithms, such as Bayesian Optimization (BO), have been leveraged for guiding autonomous and high-throughput experimentation systems. However, very few studies have evaluated the efficiency of BO as a general optimization algorithm across a broad range of experimental materials science domains. In this work, we eva…
▽ More
In the field of machine learning (ML) for materials optimization, active learning algorithms, such as Bayesian Optimization (BO), have been leveraged for guiding autonomous and high-throughput experimentation systems. However, very few studies have evaluated the efficiency of BO as a general optimization algorithm across a broad range of experimental materials science domains. In this work, we evaluate the performance of BO algorithms with a collection of surrogate model and acquisition function pairs across five diverse experimental materials systems, namely carbon nanotube polymer blends, silver nanoparticles, lead-halide perovskites, as well as additively manufactured polymer structures and shapes. By defining acceleration and enhancement metrics for general materials optimization objectives, we find that for surrogate model selection, Gaussian Process (GP) with anisotropic kernels (automatic relevance detection, ARD) and Random Forests (RF) have comparable performance and both outperform the commonly used GP without ARD. We discuss the implicit distributional assumptions of RF and GP, and the benefits of using GP with anisotropic kernels in detail. We provide practical insights for experimentalists on surrogate model selection of BO during materials optimization campaigns.
△ Less
Submitted 23 May, 2021;
originally announced June 2021.
-
Spectroscopic Evaluation of Charge-transfer Doping and Strain in Graphene/MoS2 Heterostructures
Authors:
Rahul Rao,
Ahmad E. Islam,
Simranjeet Singh,
Rajiv Berry,
Roland K Kawakami,
Benji Maruyama,
Jyoti Katoch
Abstract:
It is important to study the van der Waals interface in emerging vertical heterostructures based on layered two-dimensional (2D) materials. Being atomically thin, 2D materials are susceptible to significant strains as well as charge transfer doping across the interfaces. Here we use Raman and photoluminescence (PL) spectroscopy to study the interface between monolayer graphene/MoS2 heterostructure…
▽ More
It is important to study the van der Waals interface in emerging vertical heterostructures based on layered two-dimensional (2D) materials. Being atomically thin, 2D materials are susceptible to significant strains as well as charge transfer doping across the interfaces. Here we use Raman and photoluminescence (PL) spectroscopy to study the interface between monolayer graphene/MoS2 heterostructures prepared by mechanical exfoliation and layer-by-layer transfer. By using correlation analysis between the Raman modes of graphene and MoS2 we show that both layers are subjected to compressive strain and charge transfer doping following mechanical exfoliation and thermal annealing. Furthermore, we show that both strain and carrier concentration can be modulated in the heterostructures with additional thermal annealing. Our study highlights the importance of considering both mechanical and electronic coupling when characterizing the interface in van der Waals heterostructures, and demonstrates a method to tune their electromechanical properties.
△ Less
Submitted 10 May, 2019; v1 submitted 2 May, 2019;
originally announced May 2019.
-
Evidence for Adsorbate-Enhanced Field Emission from Carbon Nanotube Fibers
Authors:
P. T. Murray,
T. C. Back,
M. M. Cahay,
S. B. Fairchild,
B. Maruyama,
N. P. Lockwood,
M. Pasquali
Abstract:
We used residual gas analysis (RGA) to identify the species desorbed during field emission (FE) from a carbon nanotube (CNT) fiber. The RGA data show a sharp threshold for H2 desorption at an external field strength that coincides with a breakpoint in the FE data. A comprehensive model for the gradual transition of FE from adsorbate-enhanced CNTs at low bias to FE from CNTs with reduced H2 adsorba…
▽ More
We used residual gas analysis (RGA) to identify the species desorbed during field emission (FE) from a carbon nanotube (CNT) fiber. The RGA data show a sharp threshold for H2 desorption at an external field strength that coincides with a breakpoint in the FE data. A comprehensive model for the gradual transition of FE from adsorbate-enhanced CNTs at low bias to FE from CNTs with reduced H2 adsorbate coverage at high bias is developed which accounts for the gradual desorption of the H2 adsorbates, alignment of the CNTs at the fiber tip, and importance of self-heating effects with applied bias.
△ Less
Submitted 27 June, 2013;
originally announced June 2013.
-
Double resonance Raman study of disorder in CVD-grown single-walled carbon nanotubes
Authors:
Rahul Rao,
Jason Reppert,
Xianfeng Zhang,
Ramakrishna Podila,
Apparao M. Rao,
Saikat Talapatra,
Benji Maruyama
Abstract:
Single-walled carbon nanotubes (SWNTs) with varying degrees of disorder were investigated using multiple-excitation Raman spectroscopy. The lattice disorder was imparted into the nanotubes by the addition of varying amounts of sulfur to the iron catalyst in a thermal chemical vapor deposition process. Changes in the intensities of peaks occurring due to a double resonance Raman process were studie…
▽ More
Single-walled carbon nanotubes (SWNTs) with varying degrees of disorder were investigated using multiple-excitation Raman spectroscopy. The lattice disorder was imparted into the nanotubes by the addition of varying amounts of sulfur to the iron catalyst in a thermal chemical vapor deposition process. Changes in the intensities of peaks occurring due to a double resonance Raman process were studied. The intensity of the disorder-induced D band increased with a decrease in the sulfur content. Upon post-synthesis heat treatment, the double resonance process got quenched due to defect healing. The second order G' band and iTOLA bands exhibited a two-peak structure, of which one of the peaks is relatively more sensitive to defects and decreased in intensity with heat treatment.
△ Less
Submitted 29 November, 2010; v1 submitted 22 October, 2010;
originally announced October 2010.
