-
Laminar-Turbulent Patterns in Shear Flows : Evasion of Tipping, Saddle-Loop Bifurcation and Log scaling of the Turbulent Fraction
Authors:
Pavan V. Kashyap,
Juan F. Marìn,
Yohann Duguet,
Olivier Dauchot
Abstract:
We analyze a one-dimensional two-scalar fields reaction advection diffusion model for the globally subcritical transition to turbulence. In this model, the homogeneous turbulent state is disconnected from the laminar one and disappears in a tipping catastrophe scenario. The model however exhibits a linear instability of the turbulent homogeneous state, mimicking the onset of the laminar-turbulent…
▽ More
We analyze a one-dimensional two-scalar fields reaction advection diffusion model for the globally subcritical transition to turbulence. In this model, the homogeneous turbulent state is disconnected from the laminar one and disappears in a tipping catastrophe scenario. The model however exhibits a linear instability of the turbulent homogeneous state, mimicking the onset of the laminar-turbulent patterns observed in the transitional regime of wall shear flows. Numerically continuing the solutions obtained at large Reynolds numbers, we construct the Busse balloon associated with the multistability of the nonlinear solutions emerging from the instability. In the core of the balloon, the turbulent fluctuations, encoded into a multiplicative noise, select the pattern wavelength. On the lower Reynolds number side of the balloon, the pattern follows a cascade of destabilizations towards larger and larger, eventually infinite wavelengths. In that limit, the periodic limit cycle associated with the spatial pattern hits the laminar fixed point, resulting in a saddle-loop global bifurcation and the emergence of solitary pulse solutions. This saddle-loop scenario predicts a logarithmic divergence of the wavelength, which captures experimental and numerical data in two representative shear flows.
△ Less
Submitted 6 July, 2024;
originally announced July 2024.
-
Evolving disorder and chaos enhances the wave speed of elastic waves
Authors:
M. Ahumada,
L. Trujillo,
J. F. Marín
Abstract:
Static or frozen disorder, characterised by spatial heterogeneities, influences diverse complex systems, encompassing many-body systems, equilibrium and nonequilibrium states of matter, intricate network topologies, biological systems, and wave-matter interactions. While static disorder has been thoroughly examined, delving into evolving disorder brings increased intricacy to the issue. An example…
▽ More
Static or frozen disorder, characterised by spatial heterogeneities, influences diverse complex systems, encompassing many-body systems, equilibrium and nonequilibrium states of matter, intricate network topologies, biological systems, and wave-matter interactions. While static disorder has been thoroughly examined, delving into evolving disorder brings increased intricacy to the issue. An example of this complexity is the observation of stochastic acceleration of electromagnetic waves in evolving media, where noisy fluctuations in the propagation medium transfer effective momentum to the wave. Here, we investigate elastic wave propagation in a one-dimensional heterogeneous medium with diagonal disorder. We examine two types of complex elastic materials: one with static disorder, where mass density randomly varies in space, and the other with evolving disorder, featuring random variations in both space and time. Our results indicate that evolving disorder enhances the propagation speed of Gaussian pulses compared to static disorder. Additionally, we demonstrate that the enhanced speed effect also occurs when the medium evolves chaotically rather than randomly over time. The latter establishes that evolving randomness is not a unique prerequisite for observing the enhanced transport of wavefronts, introducing the concept of chaotic speed enhancement of waves in complex media.
△ Less
Submitted 18 January, 2025; v1 submitted 4 March, 2024;
originally announced March 2024.
-
Quantum state purity versus average phonon number for characterization of mechanical oscillators in cavity optomechanics
Authors:
K. Børkje,
F. Marin
Abstract:
Quantum oscillators in Gaussian states are often characterized by average occupation numbers that refer to a basis of eigenstates of the non-interacting oscillator Hamiltonian. We argue that quantum state purity is a more appropriate characteristic of such states, which can be applied to oscillators of any dimensionality. For a one-dimensional oscillator, the state purity is directly related to a…
▽ More
Quantum oscillators in Gaussian states are often characterized by average occupation numbers that refer to a basis of eigenstates of the non-interacting oscillator Hamiltonian. We argue that quantum state purity is a more appropriate characteristic of such states, which can be applied to oscillators of any dimensionality. For a one-dimensional oscillator, the state purity is directly related to a thermal occupation number defined with respect to the number state basis in which the oscillator's quantum state is thermal. Thus, it naturally introduces a more versatile definition of an average occupation number. We study optomechanical sideband cooling of one- and two-dimensional mechanical oscillators in particular, and derive exact analytical expressions for the maximal mechanical state purity achievable in the quantum backaction limit. In the case of a one-dimensional oscillator, we show that the thermal occupation number related to purity can be well approximated by the average phonon number in the weak-coupling regime, but that the two differ in the regime of ultrastrong optomechanical coupling or in cases where the oscillator's resonance frequency is strongly renormalized.
△ Less
Submitted 3 January, 2023; v1 submitted 8 November, 2022;
originally announced November 2022.
-
Excitonic transport driven by repulsive dipolar interaction in a van der Waals heterostructure
Authors:
Zhe Sun,
Alberto Ciarrocchi,
Fedele Tagarelli,
Juan Francisco Gonzalez Marin,
Kenji Watanabe,
Takashi Taniguchi,
Andras Kis
Abstract:
Dipolar bosonic gases are currently the focus of intensive research due to their interesting many-body physics in the quantum regime. Their experimental embodiments range from Rydberg atoms to GaAs double quantum wells and van der Waals heterostructures built from transition metal dichalcogenides. Although quantum gases are very dilute, mutual interactions between particles could lead to exotic ma…
▽ More
Dipolar bosonic gases are currently the focus of intensive research due to their interesting many-body physics in the quantum regime. Their experimental embodiments range from Rydberg atoms to GaAs double quantum wells and van der Waals heterostructures built from transition metal dichalcogenides. Although quantum gases are very dilute, mutual interactions between particles could lead to exotic many-body phenomena such as Bose-Einstein condensation and high-temperature superfluidity. Here, we report the effect of repulsive dipolar interactions on the dynamics of interlayer excitons in the dilute regime. By using spatial and time-resolved photoluminescence imaging, we observe the dynamics of exciton transport, enabling a direct estimation of the exciton mobility. The presence of interactions significantly modifies the diffusive transport of excitons, effectively acting as a source of drift force and enhancing the diffusion coefficient by one order of magnitude. The repulsive dipolar interactions combined with the electrical control of interlayer excitons opens up appealing new perspectives for excitonic devices.
△ Less
Submitted 15 October, 2021;
originally announced October 2021.
-
Biominerals with Texture Gradients are Functionally Graded Bioceramics Toughened by Stress Delocalization
Authors:
David Wallis,
Joe Harris,
Corinna F. Böhm,
Di Wang,
Pablo Zavattieri,
Patrick Feldner,
Benoit Merle,
Vitaliy Pipich,
Katrin Hurle,
Simon Leupold,
Lars N. Hansen,
Frédéric Marin,
Stephan E. Wolf
Abstract:
Biomineralizing organisms are widely noted and extensively studied due to their ability to generate structures exhibiting exceptional crystallographic control. Primarily, it is the organisms, such as sea-urchins or bivalves, that generate nearly single-crystalline biocrystals that have attracted attention. In contrast, biomineralizing organisms with seemingly disordered polycrystalline bio-armor h…
▽ More
Biomineralizing organisms are widely noted and extensively studied due to their ability to generate structures exhibiting exceptional crystallographic control. Primarily, it is the organisms, such as sea-urchins or bivalves, that generate nearly single-crystalline biocrystals that have attracted attention. In contrast, biomineralizing organisms with seemingly disordered polycrystalline bio-armor have been left relatively unstudied. However, the crystalline ordering in the black-lipped pearl oyster, Pinctada margaritifera, reveals that biominerals with varying crystal textures are an unrecognized class of functionally graded materials. Changing crystal textures inevitably cause a variation in Young modulus due to the orientation-dependent mechanical properties of crystals. The case of Pinctada margaritifera demonstrates that bioceramics with such crystallographical gradients are toughened by stress delocalization and reduced stress intensity factors, outperforming non-graded counterparts. These findings suggest that a multitude of biominerals, which are perceived as poorly ordered because of their polycrystallinity and changing crystal textures, may be considered as graded materials with hitherto unidentified emergent mechanical properties. The underlying design principle is remarkably simple and applicable to a wide range of crystalline material classes and may thus serve as a blueprint for future bioinspired functional materials.
△ Less
Submitted 13 August, 2020;
originally announced August 2020.
-
Nanoscale deformation mechanics reveal resilience in nacre of Pinna nobilis shell
Authors:
Jiseok Gim,
Noah Schnitzer,
Laura M. Otter,
Yuchi Cui,
Sébastien Motreuil,
Frédéric Marin,
Stephan E. Wolf,
Dorrit E. Jacob,
Amit Misra,
Robert Hovden
Abstract:
The combination of soft nanoscale organic components with inorganic nanograins hierarchically designed by natural organisms results in highly ductile structural materials that can withstand mechanical impact and exhibit high resilience on the macro- and nano-scale. Our investigation of nacre deformation reveals the underlying nanomechanics that govern the structural resilience and absorption of me…
▽ More
The combination of soft nanoscale organic components with inorganic nanograins hierarchically designed by natural organisms results in highly ductile structural materials that can withstand mechanical impact and exhibit high resilience on the macro- and nano-scale. Our investigation of nacre deformation reveals the underlying nanomechanics that govern the structural resilience and absorption of mechanical energy. Using high-resolution scanning/transmission electron microscopy (S/TEM) combined with in situ indentation, we observe nanoscale recovery of heavily deformed nacre that restores its mechanical strength on external stimuli up to 80% of its yield strength. Under compression, nacre undergoes deformation of nanograins and non-destructive locking across organic interfaces such that adjacent inorganic tablets structurally join. The locked tablets respond to strain as a continuous material, yet the organic boundaries between them still restrict crack propagation. Remarkably, the completely locked interface recovers its original morphology without any noticeable deformation after compressive contact stresses as large as 1.2 GPa.
△ Less
Submitted 24 October, 2019;
originally announced October 2019.
-
Control of Recoil Losses in Nanomechanical SiN Membrane Resonators
Authors:
A. Borrielli,
L. Marconi,
F. Marin,
F. Marino,
B. Morana,
G. Pandraud,
A. Pontin,
G. A. Prodi,
P. M. Sarro,
E. Serra,
M. Bonaldi
Abstract:
In the context of a recoil damping analysis, we have designed and produced a membrane resonator equipped with a specific on-chip structure working as a "loss shield" for a circular membrane. In this device the vibrations of the membrane, with a quality factor of $10^7$, reach the limit set by the intrinsic dissipation in silicon nitride, for all the modes and regardless of the modal shape, also at…
▽ More
In the context of a recoil damping analysis, we have designed and produced a membrane resonator equipped with a specific on-chip structure working as a "loss shield" for a circular membrane. In this device the vibrations of the membrane, with a quality factor of $10^7$, reach the limit set by the intrinsic dissipation in silicon nitride, for all the modes and regardless of the modal shape, also at low frequency. Guided by our theoretical model of the loss shield, we describe the design rationale of the device, which can be used as effective replacement of commercial membrane resonators in advanced optomechanical setups, also at cryogenic temperatures.
△ Less
Submitted 15 July, 2016;
originally announced July 2016.
-
Single charge-current in a normal mesoscopic region attached to superconductor leads via a coupled Poisson Non-equilibrium Green Function formalism
Authors:
David Verrilli,
F. P. Marin,
Rafael Rangel
Abstract:
We study the I-V characteristic of mesoscopic systems or Quantum dot attached of a pair of superconducting leads. Interaction effects in the quantum dot are considered through the charging energy of the quantum dot; the treatment of such effects are considered within a Poisson-non-equilibrium function scheme.
We study the I-V characteristic of mesoscopic systems or Quantum dot attached of a pair of superconducting leads. Interaction effects in the quantum dot are considered through the charging energy of the quantum dot; the treatment of such effects are considered within a Poisson-non-equilibrium function scheme.
△ Less
Submitted 11 December, 2015;
originally announced December 2015.
-
Nanoscale assembly processes revealed in the nacroprismatic transition zone of Pinna nobilis mollusc shells
Authors:
Robert Hovden,
Stephan E. Wolf,
Megan E. Holtz,
Frédéric Marin,
David A. Muller,
Lara A. Estroff
Abstract:
Intricate biomineralization processes in molluscs engineer hierarchical structures with meso-, nano-, and atomic architectures that give the final composite material exceptional mechanical strength and optical iridescence on the macroscale. This multiscale biological assembly inspires new synthetic routes to complex materials. Our investigation of the prism-nacre interface reveals nanoscale detail…
▽ More
Intricate biomineralization processes in molluscs engineer hierarchical structures with meso-, nano-, and atomic architectures that give the final composite material exceptional mechanical strength and optical iridescence on the macroscale. This multiscale biological assembly inspires new synthetic routes to complex materials. Our investigation of the prism-nacre interface reveals nanoscale details governing the onset of nacre formation using high-resolution scanning transmission electron microscopy. A wedge polishing technique provides unprecedented, large-area specimens required to span the entire interface. Within this region, we find a transition from nanofibrillar aggregation to irregular early-nacre layers, to well-ordered mature nacre suggesting the assembly process is driven by aggregation of nanoparticles (~50-80 nm) within an organic matrix that arrange in fiber-like polycrystalline configurations. The particle number increases successively and, when critical packing is reached, they merge into early-nacre platelets. These results give new insights into nacre formation and particle-accretion mechanisms that may be common to many calcareous biominerals.
△ Less
Submitted 9 December, 2015;
originally announced December 2015.
-
Detection of weak stochastic force in a parametrically stabilized micro opto-mechanical system
Authors:
A. Pontin,
M. Bonaldi,
A. Borrielli,
F. S. Cataliotti,
F. Marino,
G. A. Prodi,
E. Serra,
F. Marin
Abstract:
Measuring a weak force is an important task for micro-mechanical systems, both when using devices as sensitive detectors and, particularly, in experiments of quantum mechanics. The optimal strategy for resolving a weak stochastic signal force on a huge background (typically given by thermal noise) is a crucial and debated topic, and the stability of the mechanical resonance is a further, related c…
▽ More
Measuring a weak force is an important task for micro-mechanical systems, both when using devices as sensitive detectors and, particularly, in experiments of quantum mechanics. The optimal strategy for resolving a weak stochastic signal force on a huge background (typically given by thermal noise) is a crucial and debated topic, and the stability of the mechanical resonance is a further, related critical issue. We introduce and analyze the parametric control of the optical spring, that allows to stabilize the resonance and provides a phase reference for the oscillator motion, yet conserving a free evolution in one quadrature of the phase space. We also study quantitatively the characteristics of our micro opto-mechanical system as detector of stochastic force for short measurement times (for quick, high resolution monitoring) as well as for the longer term observations that optimize the sensitivity. We compare a simple, naive strategy based on the evaluation of the variance of the displacement (that is a widely used technique) with an optimal Wiener-Kolmogorov data analysis. We show that, thanks to the parametric stabilization of the effective susceptibility, we can more efficiently implement Wiener filtering, and we investigate how this strategy improves the performance of our system. We finally demonstrate the possibility to resolve stochastic force variations well below 1% of the thermal noise.
△ Less
Submitted 17 December, 2013;
originally announced December 2013.
-
Squeezing a thermal mechanical oscillator by stabilized parametric effect on the optical spring
Authors:
A. Pontin,
M. Bonaldi,
A. Borrielli,
F. S. Cataliotti,
F. Marino,
G. A. Prodi,
E. Serra,
F. Marin
Abstract:
We report the confinement of an optomechanical micro-oscillator in a squeezed thermal state, obtained by parametric modulation of the optical spring. We propose and implement an experimental scheme based on parametric feedback control of the oscillator, which stabilizes the amplified quadrature while leaving the orthogonal one unaffected. This technique allows us to surpass the -3dB limit in the n…
▽ More
We report the confinement of an optomechanical micro-oscillator in a squeezed thermal state, obtained by parametric modulation of the optical spring. We propose and implement an experimental scheme based on parametric feedback control of the oscillator, which stabilizes the amplified quadrature while leaving the orthogonal one unaffected. This technique allows us to surpass the -3dB limit in the noise reduction, associated to parametric resonance, with a best experimental result of -7.4dB. In a moderately cooled system, our technique can be efficiently exploited to produce strong squeezing of a macroscopic mechanical oscillator below the zero-point motion.
△ Less
Submitted 11 September, 2013;
originally announced September 2013.
-
Frequency noise cancellation in optomechanical systems for ponderomotive squeezing
Authors:
A. Pontin,
C. Biancofiore,
E. Serra,
A. Borrielli,
F. S. Cataliotti,
F. Marino,
G. A. Prodi,
M. Bonaldi,
F. Marin,
D. Vitali
Abstract:
Ponderomotive squeezing of the output light of an optical cavity has been recently observed in the MHz range in two different cavity optomechanical devices. Quadrature squeezing becomes particularly useful at lower spectral frequencies, for example in gravitational wave interferometers, despite being more sensitive to excess phase and frequency noise. Here we show a phase/frequency noise cancellat…
▽ More
Ponderomotive squeezing of the output light of an optical cavity has been recently observed in the MHz range in two different cavity optomechanical devices. Quadrature squeezing becomes particularly useful at lower spectral frequencies, for example in gravitational wave interferometers, despite being more sensitive to excess phase and frequency noise. Here we show a phase/frequency noise cancellation mechanism due to destructive interference which can facilitate the production of ponderomotive squeezing in the kHz range and we demonstrate it experimentally in an optomechanical system formed by a Fabry-Pérot cavity with a micro-mechanical mirror.
△ Less
Submitted 11 March, 2014; v1 submitted 23 August, 2013;
originally announced August 2013.
-
Coexisting attractors and chaotic canard explosions in a slow-fast optomechanical system
Authors:
Francesco Marino,
Francesco Marin
Abstract:
The multiple time scale dynamics induced by radiation pressure and photothermal effects in a high-finesse optomechanical resonator is experimentally studied. At difference with two-dimensional slow-fast systems, the transition from the quasiharmonic to the relaxational regime occurs via chaotic canard explosions, where large-amplitude relaxation spikes are separated by an irregular number of subth…
▽ More
The multiple time scale dynamics induced by radiation pressure and photothermal effects in a high-finesse optomechanical resonator is experimentally studied. At difference with two-dimensional slow-fast systems, the transition from the quasiharmonic to the relaxational regime occurs via chaotic canard explosions, where large-amplitude relaxation spikes are separated by an irregular number of subthreshold oscillations. We also show that this regime coexists with other periodic attractors, on which the trajectories evolve on a substantially faster time scale. The experimental results are reproduced and analyzed by means of a detailed physical model of our system.
△ Less
Submitted 21 May, 2013;
originally announced May 2013.
-
Self consistent charge-current in a mesoscopic region attached to superconductor leads
Authors:
D Verrilli,
F Marin
Abstract:
We investigate the behavior of a electric potential profile inside a mesoscopic region attached to a pair of superconducting leads. It turns out that ${\rm I}-V$ characteristic curves are strongly modified by this profile. In addition, the electronic population in the mesoscopic region is affected by the profile behavior. We discuss the single particle current and the mesoscopic electronic populat…
▽ More
We investigate the behavior of a electric potential profile inside a mesoscopic region attached to a pair of superconducting leads. It turns out that ${\rm I}-V$ characteristic curves are strongly modified by this profile. In addition, the electronic population in the mesoscopic region is affected by the profile behavior. We discuss the single particle current and the mesoscopic electronic population within the non-equilibrium Keldysh Green functions technique. The Keldysh technique results are further converted in a self consistent field (SFC) problem by introducing potential profile modifications as proposed by Datta. Evaluation of ${\rm I}-V$ characteristics are presented for several values of the model parameters and comparison with current experimental results are discussed.
△ Less
Submitted 26 October, 2011; v1 submitted 5 November, 2010;
originally announced November 2010.
