Showing 1–14 of 14 results for author: Marder, M

Lattice Model for Production of Gas

Authors: M. Marder, Behzad Eftekhari, Tadeusz W Patzek

Abstract: We define a lattice model for rock, absorbers, and gas that makes it possible to examine the flow of gas to a complicated absorbing boundary over long periods of time. The motivation is to deduce the geometry of the boundary from the time history of gas absorption. We find a solution to this model using Green's function techniques, and apply the solution to three absorbing networks of increasing c… ▽ More We define a lattice model for rock, absorbers, and gas that makes it possible to examine the flow of gas to a complicated absorbing boundary over long periods of time. The motivation is to deduce the geometry of the boundary from the time history of gas absorption. We find a solution to this model using Green's function techniques, and apply the solution to three absorbing networks of increasing complexity. △ Less

Submitted 30 November, 2017; originally announced December 2017.

Comments: 4 pages, 4 figures

Journal ref: Phys. Rev. Lett. 120, 138302 (2018)

Tearing of Free-Standing Graphene

Authors: Maria J. B. Moura, Michael Marder

Abstract: We examine the fracture mechanics of tearing graphene. We present a molecular dynamics simulation of the propagation of cracks in clamped, free-standing graphene as a function of the out-of-plane force. The geometry is motivated by experimental configurations that expose graphene sheets to out-of-plane forces, such as back-gate voltage. We establish the geometry and basic energetics of failure, an… ▽ More We examine the fracture mechanics of tearing graphene. We present a molecular dynamics simulation of the propagation of cracks in clamped, free-standing graphene as a function of the out-of-plane force. The geometry is motivated by experimental configurations that expose graphene sheets to out-of-plane forces, such as back-gate voltage. We establish the geometry and basic energetics of failure, and obtain approximate analytical expressions for critical crack lengths and forces. We also propose a method to obtain graphene's toughness. We observe that the cracks' path and the edge structure produced are dependent on the initial crack length. This work may help avoid the tearing of graphene sheets and aid the production of samples with specific edge structures. △ Less

Submitted 10 July, 2013; v1 submitted 9 July, 2013; originally announced July 2013.

Field induced phase transitions in the helimagnet Ba2CuGe2O7

Authors: J. Chovan, M. Marder, N. Papanicolaou

Abstract: We present a theoretical study of the two-dimensional spiral antiferromagnet Ba2CuGe2O7 in the presence of an external magnetic field. We employ a suitable nonlinear sigma model to calculate the T=0 phase diagram and the associated low-energy spin dynamics for arbitrary canted fields, in general agreement with experiment. In particular, when the field is applied parallel to the c axis, a previousl… ▽ More We present a theoretical study of the two-dimensional spiral antiferromagnet Ba2CuGe2O7 in the presence of an external magnetic field. We employ a suitable nonlinear sigma model to calculate the T=0 phase diagram and the associated low-energy spin dynamics for arbitrary canted fields, in general agreement with experiment. In particular, when the field is applied parallel to the c axis, a previously anticipated Dzyaloshinskii-type incommensurate-to-commensurate phase transition is actually mediated by an intermediate phase, in agreement with our earlier theoretical prediction confirmed by the recent observation of the so-called double-k structure. The sudden pi/2 rotations of the magnetic structures observed in experiment are accounted for by a weakly broken U(1) symmetry of our model. Finally, our analysis suggests a nonzero weak-ferromagnetic component in the underlying Dzyaloshinskii-Moriya anisotropy, which is important for quantitative agreement with experiment. △ Less

Submitted 4 July, 2013; v1 submitted 25 November, 2012; originally announced November 2012.

Comments: 17 pages, 14 figures. Corrected typos in the abstract

Journal ref: Physical Review B 88, 064421 (2013)

Dynamics of Simple Cracks

Authors: Eran Bouchbinder, Jay Fineberg, M. Marder

Abstract: Cracks are the major vehicle for material failure, and often exhibit rather complex dynamics. The laws that govern their motion have remained an object of constant study for nearly a century. The simplest kind of dynamic crack is a single crack that moves along a straight line. We first briefly review current understanding of this "simple" object. We then critically examine the assumptions of th… ▽ More Cracks are the major vehicle for material failure, and often exhibit rather complex dynamics. The laws that govern their motion have remained an object of constant study for nearly a century. The simplest kind of dynamic crack is a single crack that moves along a straight line. We first briefly review current understanding of this "simple" object. We then critically examine the assumptions of the classic, scale-free, theory of dynamic fracture, and note when it works and how it may fail if certain of these assumptions are relaxed. A number of examples is provided, where the introduction of physical scales into this scale-free theory profoundly affects both a crack's structure and the resulting dynamics. △ Less

Submitted 1 November, 2009; originally announced November 2009.

Comments: 36 pages, 8 figures, a review paper submitted to "Annual Review of Condensed Matter Physics"

Journal ref: Annual Review of Condensed Matter Physics 1, 371 (2010)

Rippling of Graphene

Authors: Rebecca C. Thompson-Flagg, Maria J. B. Moura, M. Marder

Abstract: Meyer et al (2007) found that free-standing graphene sheets, just one atom thick, display spontaneous ripples. The ripples are of order 2-20 Å high and 20-200 Å wide. The sheets in which they appear are only one atom thick, and extend for around 5000 Å through vacuum between metal struts that support them. Other groups have since created free-standing graphene as well (Garcia-Sanchez 2008 ; Bolo… ▽ More Meyer et al (2007) found that free-standing graphene sheets, just one atom thick, display spontaneous ripples. The ripples are of order 2-20 Å high and 20-200 Å wide. The sheets in which they appear are only one atom thick, and extend for around 5000 Å through vacuum between metal struts that support them. Other groups have since created free-standing graphene as well (Garcia-Sanchez 2008 ; Bolotin et al. 2008), and similar ripples have been found for graphene on a glass substrate (Geringer et al. 2008). Here we show that these ripples can be explained as a consequence of adsorbed molecules sitting on random sites. The adsorbates cause the bonds between carbon atoms to lengthen slightly. Static buckles then result from a mechanism like the one that leads to buckling of leaves; buckles caused by roughly 20% coverage of adsorbates are consistent with experimental observations. We explain why this mechanism is more likely to explain rippled than thermal fluctuations or the Mermin-Wagner theorem, which have previously been invoked. △ Less

Submitted 18 July, 2008; originally announced July 2008.

Comments: 5 pages and 5 figures

Molecular dynamics of shock fronts and their transitions in Lennard-Jonesium and Tin

Authors: J. M. D. Lane, M. P. Marder

Abstract: We develop a Continuous Hugoniot Method for the efficient simulation of shock wave fronts with molecular dynamics. This approach achieves a significantly improved efficiency in the generation of a dense sampling of steady-state shock front states, and allows for the study of shocks as a function of a continuous shock strength parameter, $v_p$. This is, to our knowledge, the first attempt to map… ▽ More We develop a Continuous Hugoniot Method for the efficient simulation of shock wave fronts with molecular dynamics. This approach achieves a significantly improved efficiency in the generation of a dense sampling of steady-state shock front states, and allows for the study of shocks as a function of a continuous shock strength parameter, $v_p$. This is, to our knowledge, the first attempt to map out the Hugoniot in a continuous fashion. We first apply this method to shocks in single-crystal Lennard-Jonesium along the <100> direction. Excellent agreement is found with both the published Lennard-Jones Hugoniot and results of conventional simulation methods. We next present a continuous numerical Hugoniot for shocks in tin which agrees to within 6% with experimental data. We study the strong shock to elastic-plastic shock transition in tin and find that it is a continuous transition consistent with a transcritical bifurcation. △ Less

Submitted 13 July, 2006; originally announced July 2006.

Comments: 15 pages, 21 figures

Numerical Method for Shock Front Hugoniot States

Authors: J. Matthew D. Lane, Michael P. Marder

Abstract: We describe a Continuous Hugoniot Method for the efficient simulation of shock wave fronts. This approach achieves significantly improved efficiency when the generation of a tightly spaced collection of individual steady-state shock front states is desired, and allows for the study of shocks as a function of a continuous shock strength parameter, $v_p$. This is, to our knowledge, the first attem… ▽ More We describe a Continuous Hugoniot Method for the efficient simulation of shock wave fronts. This approach achieves significantly improved efficiency when the generation of a tightly spaced collection of individual steady-state shock front states is desired, and allows for the study of shocks as a function of a continuous shock strength parameter, $v_p$. This is, to our knowledge, the first attempt to map the Hugoniot continuously. We apply the method to shock waves in Lennard-Jonesium along the $<100>$ direction. We obtain very good agreement with prior simulations, as well as our own benchmark comparison runs. △ Less

Submitted 26 January, 2006; v1 submitted 1 September, 2005; originally announced September 2005.

Comments: 4 pages, 3 figures, from Shock Compression of Condensed Matter 2005

Supersonic Rupture of Rubber

Authors: M Marder

Abstract: The rupture of rubber differs from conventional fracture. It is supersonic, and the speed is determined by strain levels ahead of the tip rather than total strain energy as for ordinary cracks. Dissipation plays a very important role in allowing the propagation of ruptures, and the back edges of ruptures must toughen as they contract, or the rupture is unstable. This article presents several lev… ▽ More The rupture of rubber differs from conventional fracture. It is supersonic, and the speed is determined by strain levels ahead of the tip rather than total strain energy as for ordinary cracks. Dissipation plays a very important role in allowing the propagation of ruptures, and the back edges of ruptures must toughen as they contract, or the rupture is unstable. This article presents several levels of theoretical description of this phenomenon: first, a numerical procedure capable of incorporating large extensions, dynamics, and bond rupture; second, a simple continuum model that can be solved analytically, and which reproduces several features of elementary shock physics; and third, an analytically solvable discrete model that accurately reproduces numerical and experimental results, and explains the scaling laws that underly this new failure mode. Predictions for rupture speed compare well with experiment. △ Less

Submitted 24 April, 2005; originally announced April 2005.

Comments: 47 pages, 13 Figures

Geometry and elasticity of strips and flowers

Authors: M. Marder, N. Papanicolaou

Abstract: We solve several problems that involve imposing metrics on surfaces. The problem of a strip with a linear metric gradient is formulated in terms of a Lagrangean similar to those used for spin systems. We are able to show that the low energy state of long strips is a twisted helical state like a telephone cord. We then extend the techniques used in this solution to two--dimensional sheets with… ▽ More We solve several problems that involve imposing metrics on surfaces. The problem of a strip with a linear metric gradient is formulated in terms of a Lagrangean similar to those used for spin systems. We are able to show that the low energy state of long strips is a twisted helical state like a telephone cord. We then extend the techniques used in this solution to two--dimensional sheets with more general metrics. We find evolution equations and show that when they are not singular, a surface is determined by knowledge of its metric, and the shape of the surface along one line. Finally, we provide numerical evidence that once these evolution equations become singular, either the surface is not differentiable, or else the metric deviates from the target metric as a result of minimization of a suitable energy functional . △ Less

Submitted 6 September, 2004; originally announced September 2004.

Comments: 12 pages and 9 figures, many of them in color

Shock wave theory for rupture of rubber

Authors: M. Marder

Abstract: This article presents a theory for the rupture of rubber. Unlike conventional cracks, ruptures in rubber travel faster than the speed of sound, and consist in two oblique shocks that meet at a point. Physical features of rubber needed for this phenomenon include Kelvin dissipation and an increase of toughness as rubber retracts. There are three levels of theoretical description: an approximate c… ▽ More This article presents a theory for the rupture of rubber. Unlike conventional cracks, ruptures in rubber travel faster than the speed of sound, and consist in two oblique shocks that meet at a point. Physical features of rubber needed for this phenomenon include Kelvin dissipation and an increase of toughness as rubber retracts. There are three levels of theoretical description: an approximate continuum theory, an exact analytical solution of a slightly simplified discrete problem, and numerical solution of realistic and fully nonlinear equations of motion. △ Less

Submitted 9 July, 2004; originally announced July 2004.

Comments: 4 pages and 2 figures

Cracks Cleave Crystals

Authors: Michael Marder

Abstract: The problem of finding what direction cracks should move is not completely solved. A commonly accepted way to predict crack directions is by computing the density of elastic potential energy stored well away from the crack tip, and finding a direction of crack motion to maximize the consumption of this energy. I provide here a specific case where this rule fails. The example is of a crack in a c… ▽ More The problem of finding what direction cracks should move is not completely solved. A commonly accepted way to predict crack directions is by computing the density of elastic potential energy stored well away from the crack tip, and finding a direction of crack motion to maximize the consumption of this energy. I provide here a specific case where this rule fails. The example is of a crack in a crystal. It fractures along a crystal plane, rather than in the direction normally predicted to release the most energy. Thus, a correct equation of motion for brittle cracks must take into account both energy flows that are described in conventional continuum theories and details of the environment near the tip that are not. △ Less

Submitted 4 March, 2004; originally announced March 2004.

Comments: 6 pages

Cracks in rubber under tension exceed the shear wave speed

Authors: Paul J. Petersan, Robert D. Deegan, M. Marder, Harry L. Swinney

Abstract: The shear wave speed is an upper limit for the speed of cracks loaded in tension in linear elastic solids. We have discovered that in a non-linear material, cracks in tension (Mode I) exceed this sound speed, and travel in an intersonic range between shear and longitudinal wave speeds. The experiments are conducted in highly stretched sheets of rubber; intersonic cracks can be produced simply by… ▽ More The shear wave speed is an upper limit for the speed of cracks loaded in tension in linear elastic solids. We have discovered that in a non-linear material, cracks in tension (Mode I) exceed this sound speed, and travel in an intersonic range between shear and longitudinal wave speeds. The experiments are conducted in highly stretched sheets of rubber; intersonic cracks can be produced simply by popping a balloon. △ Less

Submitted 12 April, 2004; v1 submitted 18 November, 2003; originally announced November 2003.

Comments: 4 pages, 5 eps figures

The shape of the edge of a leaf

Authors: M. Marder

Abstract: Leaves and flowers frequently have a characteristic rippling pattern at their edges. Recent experiments found similar patterns in torn plastic. These patterns can be reproduced by imposing metrics upon thin sheets. The goal of this paper is to discuss a collection of analytical and numerical results for the shape of a sheet with a non--flat metric. First, a simple condition is found to determine… ▽ More Leaves and flowers frequently have a characteristic rippling pattern at their edges. Recent experiments found similar patterns in torn plastic. These patterns can be reproduced by imposing metrics upon thin sheets. The goal of this paper is to discuss a collection of analytical and numerical results for the shape of a sheet with a non--flat metric. First, a simple condition is found to determine when a stretched sheet folded into a cylinder loses axial symmetry, and buckles like a flower. General expressions are next found for the energy of stretched sheet, both in forms suitable for numerical investigation, and for analytical studies in the continuum. The bulk of the paper focuses upon long thin strips of material with a linear gradient in metric. In some special cases, the energy--minimizing shapes of such strips can be determined analytically. Euler--Lagrange equations are found which determine the shapes in general. The paper closes with numerical investigations of these equations. △ Less

Submitted 26 November, 2002; v1 submitted 12 August, 2002; originally announced August 2002.

Comments: 15 pages and 6 figures

Dynamic Fracture in Single Crystal Silicon

Authors: Jens A. Hauch, Dominic Holland, M. P. Marder, Harry L. Swinney

Abstract: We have measured the velocity of a running crack in brittle single crystal silicon as a function of energy flow to the crack tip. The experiments are designed to permit direct comparison with molecular dynamics simulations; therefore the experiments provide an indirect but sensitive test of interatomic potentials. Performing molecular dynamics simulations of brittle crack motion at the atomic sc… ▽ More We have measured the velocity of a running crack in brittle single crystal silicon as a function of energy flow to the crack tip. The experiments are designed to permit direct comparison with molecular dynamics simulations; therefore the experiments provide an indirect but sensitive test of interatomic potentials. Performing molecular dynamics simulations of brittle crack motion at the atomic scale we find that experiments and simulations disagree showing that interatomic potentials are not yet well understood. △ Less

Submitted 5 April, 1999; v1 submitted 20 October, 1998; originally announced October 1998.

Comments: 4 pages, 4 figures, 19 references